257 jobs found

Commercial Gas Engineer (HVAC) Location: Peterborough & Home Counties Contract Type: Permanent Hours: 45 Hours Per Week Earn Up to 60,000 Per Year Basic Salary: 48,656.73 (Including Standby Payment) With paid travel time, overtime, and a 1-in-4 call-out rota (Double Time weekends / Time and a Half weekdays), earnings are realistically circa 60,000 per year. Benefits Paid travel time Overtime available 33 days holiday Private pension Private healthcare Life insurance Employee discounts Company vehicle, tools & uniform The Role We are recruiting for a Commercial Gas Engineer (HVAC) to support a major UK supermarket contract across Peterborough and the Home Counties. You will carry out planned preventative maintenance (PPM), reactive repairs, and servicing across a range of commercial HVAC systems in retail environments. Key Responsibilities PPM and reactive maintenance across multiple sites Service and repair boilers, pumps, fans, AHUs and FCUs Complete minor installations and alterations Fault-find and report non-repairable issues with recommendations Order parts in line with procedures Ensure all work meets safety and compliance standards Essential Requirements NVQ/SVQ Level 3 in HVAC or equivalent ACS Commercial Gas (COCN1, CIGA1, CORT1, ICPN1, CDGA1, TPCP1/1A) Full UK Driving Licence Experience in commercial PPM and reactive maintenance Ability to work at height and in confined spaces PDA/mobile system experience Desirable Domestic ACS (CCN1, CENWAT, CPA1) F-Gas Category 1 (2079) 18th Edition (BS7671) Call-Out Rota 1-in-4 on-call rota Double Time weekends Time and a Half weekdays A great opportunity offering stability, strong earning potential, and long-term progression. Apply now with your CV for immediate consideration.

Murphy is recruiting for a Construction Manager to work with the Energy Team on the National Grid, Great Grid Partnership. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Construction Manager: Overall management of project teams during the construction and installation phase of the project. Co-ordination of constructability input during solutions identification and development phase. Allocation of construction staff to projects ensuring that appropriate construction and installation staff are appointed to individual projects: based on experience, skills and knowledge. Liaises with the Project Managers to ensure that the construction resource pool is an appropriate size, with an appropriate blend of skill sets for the projected workload. Overall management of construction resources including Labour, Plant and Materials. Performance management of subcontractors. Ensures that the construction and installation teams are accountable for their performance against agreed schedules and man-hour budgets. Oversee the duties of the Principal Contractor are discharged in accordance with the CDM Regulations. Control all temporary and permanent construction and installation activities are carried out in accordance with agreed quality procedures. Interfaces with all other functional leaders within the organisation to facilitate successful development of the project from solution stage constructability through construction, installation, commissioning, and handover to the client. Still interested, does this sound like you? Experience in delivering Major Civils projects. Experience within a Construction Manager role or similar. HNC / HND or NVQ Level 5 (or Degree) Excellent stakeholder management skills, able to develop close working relationships with clients and subcontractors. A true leader with passion for people development, can do attitude and a flare for innovation.

Commercial Gas Engineer (HVAC) Location: Oxford Contract Type: Permanent Hours: 45 Hours Per Week Earn Up to 60,000 Per Year Basic Salary: 48,656.73 (Including Standby Payment) With paid travel time, overtime, and a 1-in-4 call-out rota (Double Time weekends / Time and a Half weekdays), earnings are realistically circa 60,000 per year. Benefits Paid travel time Overtime available 33 days holiday Private pension Private healthcare Life insurance Employee discounts Company vehicle, tools & uniform The Role We are recruiting for a Commercial Gas Engineer (HVAC) to support a major UK supermarket contract across Oxford. You will carry out planned preventative maintenance (PPM), reactive repairs, and servicing across a range of commercial HVAC systems in retail environments. Key Responsibilities PPM and reactive maintenance across multiple sites Service and repair boilers, pumps, fans, AHUs and FCUs Complete minor installations and alterations Fault-find and report non-repairable issues with recommendations Order parts in line with procedures Ensure all work meets safety and compliance standards Essential Requirements NVQ/SVQ Level 3 in HVAC or equivalent ACS Commercial Gas (COCN1, CIGA1, CORT1, ICPN1, CDGA1, TPCP1/1A) Full UK Driving Licence Experience in commercial PPM and reactive maintenance Ability to work at height and in confined spaces PDA/mobile system experience Desirable Domestic ACS (CCN1, CENWAT, CPA1) F-Gas Category 1 (2079) 18th Edition (BS7671) Call-Out Rota 1-in-4 on-call rota Double Time weekends Time and a Half weekdays A great opportunity offering stability, strong earning potential, and long-term progression. Apply now with your CV for immediate consideration.

Job Title: Legionella Remedial Plumber Location: Coventry, West Midlands Salary/Benefits: 27k - 37k + Training & Benefits Due to recently winning new contracts, a privately-owned Legionella / Water Hygiene outfit is recruiting for a hands-on and hardworking Legionella Remedial Plumber. They are ideally seeking someone who is based in the Midlands, who is open to travel further afield when required. Applicants must have a diverse range of experience within the industry, and will be self-sufficient whilst carrying out reactive and PPM tasks. Our client is able to offer fantastic progression and training, in addition to competitive salaries and benefits packages (including: fleet vehicle, overtime, pension scheme and fuel card). We are able to consider candidates from the following locations: Coventry, Rugby, Daventry, Royal Leamington Spa, Stratford-upon-Avon, Alcester, Redditch, Solihull, Nuneaton, Hinckley, Birmingham Bromsgrove, Stourbridge, Dudley, West Bromwich, Walsall, Wolverhampton, Burntwood, Cannock, Penkridge, Tamworth, Droitwich Spa, Lichfield, Stafford, Coalville, Nottingham, Swadlincote. Experience / Qualifications: Strong history working as a Legionella Remedial Plumber Must hold the NVQ Level 1 and 2 in Plumbing as a minimum Ideally will be qualified with the Level 3 in Plumbing and the G3 Unvented ticket Fully conversant in ACOP L8 and HSG 274 guidelines Good literacy, numeracy and IT skills Adaptable to changing travel needs The Role: Undertaking a wide range of PPM and some call-out remedial plumbing duties TMV servicing and replacement Deadleg removals Servicing and installing vented and unvented water cylinders Calorifier inspections and installations CWST refurbishments and replacements Decommissioning of existing systems Highlighting any faults on systems and making recommendations to rectify Keeping accurate records of works completed Representing the company in a professional manner Working to set deadlines and personal targets Alternative job titles: Plumber, Legionella Plumber, Legionella Remedial Engineer, Water Hygiene Plumber, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Design Manager - Renewable Energy South East England 60,000- 70,000 Full-Time Permanent We are currently partnering with a rapidly growing renewable energy and building services specialist to recruit an experienced Design Manager to lead and develop their technical design function. This is an excellent opportunity for a senior-level design professional to join a business delivering high-quality renewable and M&E projects across residential and commercial sectors, with strong long-term progression opportunities as the company continues to expand. The Company Our client is a well-established provider of renewable energy and mechanical/electrical building services solutions , delivering technically advanced projects across the South East. Working alongside developers, architects, and consultants, they specialise in the design and delivery of systems including heat pumps, solar PV, MVHR, and integrated M&E solutions for both residential and commercial applications. With a strong project pipeline and ambitious growth plans, they are investing heavily in both their technical capability and leadership team. The Role As Design Manager, you will take ownership of the company's design department, managing a small team of engineers while remaining hands-on with complex technical design work. You will oversee projects from post-sale handover through to detailed technical delivery, ensuring designs are practical, coordinated, and installation-ready. The Candidate We are looking for a technically strong and commercially aware individual with experience leading renewable or building services design projects. Essential: Proven experience designing renewable energy systems , particularly heat pumps Strong background in building services or M&E design Experience managing or mentoring technical teams Excellent understanding of BIM workflows and RIBA stages Strong client-facing and stakeholder management skills Ability to work within fast-paced project environments Excellent attention to detail and problem-solving skills Software Experience: AutoCAD Revit IES EasyPV (or similar) Desirable: Experience on high-spec residential or commercial developments Experience presenting technical designs to clients or consultants Portfolio/examples of previous renewable system designs The Package 50,000- 55,000 basic salary Realistic OTE of 60,000- 70,000 Pension scheme Car allowance / company vehicle options On-site parking On-site gym Ongoing professional development Strong long-term progression opportunities within a growing business Career Progression This role offers genuine scope for progression within a business experiencing significant growth in the renewable energy sector. As the company expands, there will be opportunities to progress into: Head of Design Technical Director Operations or Engineering Leadership roles This is an opportunity to join a company where you can play a major role in shaping both the technical department and the future direction of the business. Why Apply? This is a standout opportunity for a technically driven Design Manager looking to work on innovative renewable energy projects while joining a business with ambitious growth plans and a strong reputation for quality delivery. WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.

Job Title: Legionella Remedial Plumber Location: Bristol, Somerset Salary/Benefits: 27k - 37k + Training & Benefits We are recruiting for an experienced and qualified Legionella Remedial Plumber to cover commercial and public sector contracts along the M4 corridor and into the South West of England. Applicants must have a strong technical background, as you will be required to identify technical issues and faults on site, and making tailored technical recommendations. As a minimum, you will hold the NVQ Level 2 in Plumbing and G3 Unvented ticket. You will be joining a successful and respected outfit, who can offer competitive salaries and usual benefits (including: vehicle, overtime, annual leave and pension scheme). Locations of work include: Bristol, Bath, Yate, Filton, Thornbury, Dursley, Chippenham, Corsham, Melksham, Calne, Devizes, Swindon, Cirencester, Westbury, Warmingster, Frome, Radstock, Shepton Mallet, Wells, Glastonbury, Portishead, Weston-super-Mare, Gloucester, Chepstow, Lydney, Taunton, Yeovil, Shaftesbury, Bridgwater, Chard. Experience / Qualifications: Track record as a Legionella Remedial Plumber Qualified with the NVQ Level 2 in Plumbing Will hold the G3 Unvented ticket Good understanding of HSG 274 and ACOP L8 compliance guidelines Strong literacy, numeracy and IT skills Experience working across a diverse range of sites The Role: Carrying out predominantly pre-planned remedial plumbing duties Replacing flexihoses and components TMV servicing and replacements Deadleg removals Pipework adjustments and modifications Tank cleans, disinfections and replacements POU heater installations Servicing of unvented cylinders Fault finding on site and making recommendations for works Keeping accurate records of works undertaken Representing the company in a professional manner Alternative job titles: Legionella Plumber, Water Hygiene Plumber, Plumber, Remedial Technician, Environmental Service Technician, Remedial Plumber. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Job Title: Legionella Plumber Location: Watford, Hertfordshire Salary/Benefits: 27k - 38k + Training & Benefits We are recruiting in and around the M25 for a knowledgeable and driven Legionella Plumber. You will be joining a multi-disciplined outfit, with a busy and successful Legionella / Water Hygiene department. On a daily basis, you will be interpreting legionella risk assessments to identify required remedial actions, and completing repairs to a high standard. As a minimum, applicants will hold the NVQ Level 2 in Plumbing and G3 Unvented ticket. Salaries on offer are competitive, and benefits include: training, overtime opportunities, company vehicle, pension scheme and annual leave. Locations of work include: Watford, Potters Bar, Cheshunt, Welwyn Garden City, Harlow, Sawbridgeworth, Epping, Enfield, Romford, Chigwell, Billericay, Hornchurch, Basildon, Grays, Tilbury, Ilford, Barking, Erith, Dartford, Gravesend, Sidcup, Bromley, Orpington, Croydon, Mitcham, Epsom, Sutton, Kingston upon Thames, Woking, Hounslow, Twickenham, Slough, Windsor, Beaconsfield, Harrow, Wembley. Experience / Qualifications: Experience working as a Legionella Plumber within a well-established outfit Will be qualified with the NVQ Level 2 in Plumbing and G3 Unvented ticket It would be advantageous to hold the NVQ Level 3 in Plumbing Good knowledge of HSG 274 and ACOP L8 guidelines Strong communication skills Good IT, literacy and numeracy skills The Role: Installations of new cold water storage tanks Refurbishments of existing tanks Deadleg removals TMV servicing and installations Servicing of vented and unvented cylinders Pipework modifications and replacements Ad-hoc cleans and disinfections on CWST Providing updates and technical advice to clients Completing some urgent / emergency works when required Producing regular service reports Adhering to safety guidelines and personal targets Alternative job titles: Legionella Remedial Plumber, Water Hygiene Plumber, Remedial Engineer, Plumber, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Principal Electrical Engineer (Building Services) Location: Edinburgh Salary: Maximum 80,000 per year + 5,800 car allowance + bonus Role type: Hybrid, x2 days in-office Overview This opportunity will involve working as part of a national practice of Building Design professionals delivering engineering design solutions to clients across the UK. This role will encompass a multi-sector experience, but expertise from working within the Commercial, Residential, Education or Transportation sectors would be a benefit. The opportunity will require candidates to be client-facing as well as being involved in the day-to-day design and management of projects. This role will allow development of existing technical skills as well as providing potential to expand digital skills and project management. The ideal individual will bring strong technical skills to the role, as well as an enquiring mind able to contribute to the growth of our digital practice, and the potential to lead and manage diverse delivery teams, locally and remotely. Your role Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc. Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, Amtech, Dialux/Relux, in-house developed tools, etc. Preparing technical specifications using NBS. Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit. Representing the client at meetings with clients and contractors. Site surveys, inspections and monitor site works. Report and technical note writing. Maintaining complete records and archives to company standards. Adherence to all quality, environmental & governance processes. Managing own workload, updating forward plan of workload regularly and working to time allocations. Managing elements of project delivery and an understanding of budget costings. Reviewing progress, including reporting any anomalies and changes of scope to the project lead. Assist with technical development of junior staff. About you Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects. Chartered Engineer with CIBSE or IET or working towards Chartership. Good level of computer literacy in a range of software tools including Amtech/Predesign, Dialux/Relux, NBS and Microsoft packages. Any HV tools will also be beneficial. Familiar with energy reduction methods and approaches to decarbonizing new and existing buildings. Some knowledge of energy related contracts and funding mechanisms such as SALIX. Understanding of energy and carbon related data capture and analytics. Awareness of the principles of building physics such as passive design solutions and fabric first approaches. Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance. Experience of working in a design consultancy and/or experience of working within a contractor design environment is essential. Detailed knowledge of appropriate technical standards. Able to take charge of project deliverables, make decisions, act on own initiative and operate in a pro-active way. Good report writing skills, experience of making presentations to and attending meetings with clients is essential. Comfortable working within time and cost budgets as agreed at project briefing meetings. Undertake any other reasonable tasks or duties as required by the management team from time to time, to maintain flexibility in the organisation. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Principal Electrical Engineer (Building Services) Location: Glasgow Salary: Maximum 80,000 per year + 5,800 car allowance + bonus Role type: Hybrid, x2 days in-office Overview This opportunity will involve working as part of a national practice of Building Design professionals delivering engineering design solutions to clients across the UK. This role will encompass a multi-sector experience, but expertise from working within the Commercial, Residential, Education or Transportation sectors would be a benefit. The opportunity will require candidates to be client-facing as well as being involved in the day-to-day design and management of projects. This role will allow development of existing technical skills as well as providing potential to expand digital skills and project management. The ideal individual will bring strong technical skills to the role, as well as an enquiring mind able to contribute to the growth of our digital practice, and the potential to lead and manage diverse delivery teams, locally and remotely. Your role Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc. Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, Amtech, Dialux/Relux, in-house developed tools, etc. Preparing technical specifications using NBS. Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit. Representing the client at meetings with clients and contractors. Site surveys, inspections and monitor site works. Report and technical note writing. Maintaining complete records and archives to company standards. Adherence to all quality, environmental & governance processes. Managing own workload, updating forward plan of workload regularly and working to time allocations. Managing elements of project delivery and an understanding of budget costings. Reviewing progress, including reporting any anomalies and changes of scope to the project lead. Assist with technical development of junior staff. About you Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects. Chartered Engineer with CIBSE or IET or working towards Chartership. Good level of computer literacy in a range of software tools including Amtech/Predesign, Dialux/Relux, NBS and Microsoft packages. Any HV tools will also be beneficial. Familiar with energy reduction methods and approaches to decarbonizing new and existing buildings. Some knowledge of energy related contracts and funding mechanisms such as SALIX. Understanding of energy and carbon related data capture and analytics. Awareness of the principles of building physics such as passive design solutions and fabric first approaches. Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance. Experience of working in a design consultancy and/or experience of working within a contractor design environment is essential. Detailed knowledge of appropriate technical standards. Able to take charge of project deliverables, make decisions, act on own initiative and operate in a pro-active way. Good report writing skills, experience of making presentations to and attending meetings with clients is essential. Comfortable working within time and cost budgets as agreed at project briefing meetings. Undertake any other reasonable tasks or duties as required by the management team from time to time, to maintain flexibility in the organisation. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Electrical Estimator Location: Bank, London (Hybrid Working) Salary: 40,000 - 45,000 per annum Working Pattern: 4 days in the office, 1 day working from home About the Role We are seeking an experienced Electrical Estimator to join our established team based in Bank, London. This is an excellent opportunity for a commercially minded professional with a background in electrical estimating and commercial fit-out projects. The successful candidate will be responsible for preparing accurate and competitive electrical tenders ranging from 10,000 to 3 million, supporting the continued growth of the business. Key Responsibilities Producing detailed and accurate electrical estimates and tender submissions Reviewing drawings, specifications and tender documentation Conducting take-offs and cost analysis Liaising with suppliers and subcontractors to obtain quotations Identifying value engineering opportunities Supporting commercial and pre-construction teams throughout the tender process Managing multiple tenders simultaneously while meeting deadlines About You Previous experience as an Electrical Estimator Commercial fit-out experience is essential Proven experience pricing electrical projects from 10k to 3m Strong understanding of electrical installations and building services Excellent commercial awareness and attention to detail Strong communication and organisational skills Desirable Previous hands-on experience as an Electrician Relevant industry qualifications What's on Offer? Competitive salary of 40,000 - 45,000 Hybrid working arrangement Opportunity to work on a diverse range of commercial fit-out projects Supportive and professional working environment Long-term career progression opportunities

Morson Edge are currently recruiting on behalf of a tier one contractor for a MEICA Estimator based in St Albans. This is a permanent role, offering up to £75,000 per annum. There will be an aspect of hybrid working (2 days from home), and were seeking candidates with specific MEICA experience. The Role As a MEICA Estimator, you will be responsible for developing MEICA estimates and tenders for our MEICA-related projects. The role will include the successful development of the project scope and design as it drives through the estimating and tendering process through to contract award. Your involvement in the projects will then continue as you provide advice and support to the Contracts Manager through the enabling phase of the project. You will be a key link and will work collaboratively work with the MEICA Contracts Manager, Project Manager, Project Engineers, Bid Manager and Commercial team to meet the project requirements in a safe, efficient and environmentally sensitive manner. As MEICA Estimator, you will be expected to contribute fully to the growth of the MEICA business through successful project delivery. This will involve you getting into and owning the finite details of each project, to ensure that it is efficiently priced, programmed and planned to meet project milestones, whilst driving value and providing the required levels of contribution at all levels. It will also involve you in obtaining and sharing feedback from project outcomes as they are delivered in order to gather learning that can be embedded into future estimates. Key Responsibilities Working with the MEICA Project and civils team to effectively manage the tender pricing process including tender appraisals and contribution to the enabling phase by: Developing the scope of work for the project with the MEICA team Sharing that scope with the Bid team including inputting to the technical quality responses Applying your experience of MEICA equipment and services used in the construction of Water and Wastewater Treatment Works to achieve a safe, efficient and environmentally friendly solution for each project Contributing to process design development and then ensuring that designs are checked and verified and are sufficiently developed to ensure accurate tender submissions Management of our selected contractors ensuring quality of delivery and value for money in all tender submissions, including: Preparing material, equipment, and sub-contract enquiries Collating and managing technical enquiries raised by our trusted supply chain partners and, evaluating their tender returns for compilation into the tender Production of the MEICA cost estimate for tender submission by producing bottom-up estimates derived from the client scope and technical information Risk and value management during the tender period Preparing budgets and cost plans Ensure estimating & tender procedures (CPR230) and governance (PL101) as well as all levels of due diligence are followed before tender adjudication Additional Responsibilities Ensuring that actual cost data and programme milestone delivery achievement is captured, so that you can compare actual outputs to tendered expectations, develop learning regarding these differences and share and embed this learning into future tenders Promoting the use of innovative methods, materials & safe systems of work Communicating clearly and effectively with senior management, designers, consultants, clients, and project teams on all relevant technical matters Being the key point of contact between the project and the programme Managing stakeholder communications and key messages for the project and recording and sharing these in a timely manner Ensuring client specifications and requirements are met during delivery by reviewing progress and liaising with the MEICA and project team Promoting and maintaining health & safety on all projects with the Project Manager and their teams whilst dealing with any day-to-day unexpected problems during the project, reporting this to the MEICA Contracts Manager when required Essential Experience Required Full understanding of the complexities of MEICA equipment and systems Ability to evaluate proposals from the supply chain for MEICA equipment including scope of supply, technical compliance, and commercial offer Able to interpret technical drawings from clients, develop baseline cost estimates and routines, and produce labour, plant, and material cost build-ups A level, or equivalent plus either a foundation degree, or HNC in Mechanical or Electrical engineering MEICA (mechanical, electrical, instrumentation, control, and automation) installation/commissioning knowledge, as well as process understanding for both water and wastewater treatment and technical construction knowledge Knowledge of estimating software such as Candy would be useful but not essential Understanding multiple forms of contracts, including NEC, as well as the operation of frameworks within the water and wastewater industry Knowledge of WIMES Standards Desirable SMSTS/SSSTS CSCS card First Aid EUSR Water Hygiene card Please contact Harry Sharrard for more information via LinkedIn, or on (phone number removed).

Mobile Mechanical Engineer / Commercial Plumber London Temp to Perm Immediate Start We are recruiting for an experienced Mobile Mechanical Engineer / Commercial Plumber to join a building services contractor working across commercial sites throughout London. The role involves planned and reactive mechanical maintenance, commercial plumbing repairs, fault finding and plant room work across multiple properties. Key Duties PPM and reactive mechanical maintenance Commercial plumbing repairs and installations Fault finding on mechanical systems Plant room maintenance (pumps, valves, pipework) Hot & cold-water systems Small remedial / install works CAFM job management via mobile/tablet Working independently across London sites Requirements NVQ Level 2/3 Plumbing & Heating or Mechanical Engineering Strong commercial maintenance experience Fault finding ability essential Full UK Driving Licence Desirable Unvented ticket IPAF L8 Water Hygiene HVAC/building services experience Offer Van + fuel card Overtime available Temp-to-perm opportunity Immediate start Apply now for immediate consideration.

Senior Consultant (Electrical) Location: Birmingham Salary: Maximum 60,000 per year Overview This opportunity will involve working as part of a national practice of Building Design professionals delivering engineering design solutions to clients across the UK. This role will encompass a multi-sector experience, but expertise from working within the Commercial, Residential, Education or Transportation sectors would be a benefit. The opportunity will require candidates to be client-facing as well as being involved in the day-to-day design and management of projects. This role will allow development of existing technical skills as well as providing potential to expand digital skills and project management. The ideal individual will bring strong technical skills to the role, as well as an enquiring mind able to contribute to the growth of our digital practice, and the potential to lead and manage diverse delivery teams, locally and remotely. Your role Ensuring an understanding of project briefs. Design and specification of all Electrical Building Services systems - power, earthing, lighting, life safety, telecoms, security, access control, lifts, lightning protection etc. Carry out (and managing of others), in the production of detailed calculations using industry standard software tools including Excel, Amtech, Dialux/Relux, in-house developed tools, etc. Preparing technical specifications using NBS. Collaborate with our BIM team to prepare models and drawings, with a working understanding of Autodesk Revit. Representing the company at meetings with clients and contractors. Site surveys, inspections and monitor site works. Report and technical note writing. Maintaining complete records and archives to company standards. Adherence to all quality, environmental & governance processes. Managing own workload, updating forward plan of workload regularly and working to time allocations. Managing elements of project delivery and an understanding of budget costings. Reviewing progress, including reporting any anomalies and changes of scope to the project lead. Assist with technical development of junior staff. About you Degree qualified, or equivalent qualification, in Building Services Engineering / Electrical Engineering or related subjects. Chartered Engineer with CIBSE or IET or working towards Chartership. Good level of computer literacy in a range of software tools including Amtech/Predesign, Dialux/Relux, NBS and Microsoft packages. Any HV tools will also be beneficial. Familiar with energy reduction methods and approaches to decarbonizing new and existing buildings. Some knowledge of energy related contracts and funding mechanisms such as SALIX. Understanding of energy and carbon related data capture and analytics. Awareness of the principles of building physics such as passive design solutions and fabric first approaches. Competent in designing for measurement and verification, including experience of commissioning and post installation evaluation of performance. Experience of working in a design consultancy and/or experience of working within a contractor design environment is essential. Detailed knowledge of appropriate technical standards. Able to take charge of project deliverables, make decisions, act on own initiative and operate in a pro-active way. Good report writing skills, experience of making presentations to and attending meetings with clients is essential. Comfortable working within time and cost budgets as agreed at project briefing meetings. Undertake any other reasonable tasks or duties as required by the management team from time to time, to maintain flexibility in the organisation. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Do you enjoy working outdoors and being involved in a practical role? If so, we have a great opportunity to join our operational team here at Hinkley Point C. This is a 4 on 4 off vacancy. What you'll do Install, operate, and maintain the dewatering and water management network on the Hinkley Point C site to ensure that all operations meet our rigorous safety, quality, and service standards. Work within a great team, both indoors and outdoors, in all environments, dealing with different challenges every day and providing a vital service. Day to day, you will perform a range of routine and reactive operational and maintenance work, making sure that everything is done within permit conditions and in line with relevant procedures. Health and safety are a priority for us, so you will be expected to operate within strict guidelines to ensure the safety of yourself, your team, our subcontractors, and other contractors and colleagues on Hinkley Point C. What you'll need A positive and can-do attitude who is well organised and customer focused. Ideally, you will have previous experience within the construction industry. However, we will teach you all you need to know to be successful in the role. Trade skills and previous experience with hand tools, power tools, woodworks, fixtures, and fittings would be advantageous. You will interact with a range of stakeholders, including your own team, client representatives, and other contractors. Therefore, good communication skills and being a natural team player would also be advantageous. What you'll receive At Turnbull we take pride in how we support professional development, enable career progression, and provide a wide range of exciting opportunities for everyone. We firmly believe that investing in our people is the key to our success, which is why we offer the following financial and non-financial benefits to support your health and wellbeing: 25 days' holiday rising to 28 with length of service. (pro rota'd) Up to 20% combined pension contribution. The opportunity to buy up to ten days' holiday and sell up to five every year. Performance related bonus of around 5%. A healthcare package that supports you with your healthcare costs. A 1,000 referral fee if you recommend someone to work for us. Life assurance of up to eight times your salary. Sustainable benefits including electric vehicle and cycle2work schemes. A range of family friendly policies including enhanced maternity and paternity leave. One paid volunteering day each year. Cashback and discounts from over 3,000 retailers. Who we are We are leaders in lifecycle construction and operations for the utilities and infrastructure sectors. From design and build to facility management and maintenance, we provide a single, sustainable, end-to-end solution for engineering projects, saving money, reducing waste and adding long-term value to local communities and the wider economy. Turnbull is an award-winning progressive business, which has won the RoSPA health and safety awards for our work at Hinkley Point C for the last five years. The services we provide to our clients include but are not limited to: Project management. Design and build services. Consent management and delivery. Contract management. Delivery of civil, mechanical and electrical engineering services. We have expertise in: Low voltage (LV) and high voltage (HV) electrical power distribution systems. Sewage systems and pumping stations. Biological waste treatment plants. Telecommunication networks (copper and fibre). Drinking water distribution networks and booster stations. Surface and groundwater drainage systems inclusive of borehole delivery and management. Roadway and pedestrian walkway lighting networks. Managing environmental discharge permit and scientific services. Earthworks and ground remediation services. We continue to promote diversity and inclusion. With that in mind, we welcome all applicants. We are also delighted to have signed the Armed Forces Covenant and are a Disability Confident Employer

SLH Consult is partnering with a premier fire protection specialist to recruit a Design Manager. You will lead the engineering design phase for complex systems across major tech hubs in Watford and Slough. Our client prefers a permanent hire but will happily secure top talent on a temp-to-perm basis. Key Responsibilities Design Leadership: Oversee the creation of fully compliant, end-to-end fire suppression (gas/water mist) and detection system designs. Technical Compliance: Ensure all drawings strictly adhere to British Standards (BS 5839, BS EN 12845), LPC rules, and NFPA guidelines. BIM Coordination: Manage the integration of fire system designs into 3D BIM models, resolving clashes with other MEP services. Client & Site Liaison: Translate complex technical client requirements into actionable engineering blueprints for site installation teams. Team Management: Lead, mentor, and review the output of an internal team of CAD/BIM design engineers. What You ll Need Fire Sector Expertise: Deep technical mastery of fire suppression (gas, water mist, sprinklers) and detection (VESDA, addressable systems) design. Data Centre Exposure: Proven experience designing systems for critical, high-density environments where business continuity is paramount. Software Proficiency: Mastery of AutoCAD, Revit, and BIM coordination tools. Qualifications: Relevant engineering degree, LPCB competency certification, or equivalent industry design credentials. Location: Based in or easily commutable to the South East, with flexibility to visit offices and sites in Slough and Watford. What s on Offer Highly competitive base salary or premium contract day rates. Package including car allowance, private healthcare, and hybrid working options. Opportunity to work on state-of-the-art, hyper-scale data centre developments.

Build Recruitment are looking for a Multi Skilled Static Engineer (Electrical Bias) to work in Manchester City Centre. Job Description To carry out the repair, maintenance or installation of all plant, equipment, and systems associated with the premises, in line with best practice, statutory compliance and service level agreements as detailed in the Client's Contractual agreement. The post holder is required to have significant core experience and qualifications working on various types of Electrical, HVAC and plumbing systems etc. Main duties and responsibilities: • Establishing and developing a working partnership with the client • Managing the successful delivery of all services within the scope of the specification • Comply with all of HFL s statutory and site-specific Health, Safety and Environmental policies and procedures. • Meeting or exceeding all agreed service levels • Ensuring attainment of customer satisfaction • Developing and retaining an in-depth knowledge of all critical systems, both mechanical and electrical, and associated control systems critical to the Critical Business Operations • Must have experience in carrying out servicing to SFG20 standards • To work with contract operational and administrative staff to ensure Hard Service tasks are completed and reported effectively. • Communicate with colleagues, clients and their representatives in a polite and courteous manner at all times to ensure a high level of customer care. • Must be able to undertake the day-to-day operation, planned maintenance, fault finding and repair, periodic inspections and testing of the complete spectrum of services found in a building services environment, to include - • Must have experience in HVAC systems • Must have experience with Electrical systems • Water Systems and Distribution. • Building Management Systems (BMS). • To ensure that planned preventative maintenance and associated work is implemented efficiently to specified requirements and provide assistance with improving these requirements on a continuous basis. • To clearly identify and record concise details of test results and actions taken when rectifying break-downs and further action required to eliminate or minimise future problems. Ensuring that these records are kept up to date at all times. • The above is not intended as an exhaustive list, but as an illustration to the diversity of plant and equipment to be maintained. The post holder will only work on equipment which they are deemed competent on. • Understanding the integrated operations of each system and their critical interfaces. • Making operational systems judgements and decisions based on good engineering practice and essential service requirements, in order to ensure continuity of service. Liaising with the site based maintenance staff, sub contractors and other site based operational departments to ensure good communications. • Ensuring all site safety inductions are completed by sub-contractors prior to starting planned tasks. • Being aware of all sub-contract maintenance activities, and monitoring safety procedures are being followed whilst on site. • Fulfilling the roles of authorised persons for boilers, pressure vessels, confined spaces and fuels, oils and lubricants. • To ensure all relevant Health and Safety, COSHH and Permit to Work Regulations are adhered to at all times. • To maintain up-to-date skills and knowledge, and keep up an awareness of service issues. • To provide support to the incident management group when called upon and make recommendations for improving the services and the way the building is managed. Skills & Qualifications: • Must have a minimum of 5 years working with Commercial electrical systems. • Good organisational skills. • Excellent communication skills both written and verbal. • General working as part of a team. • Must be highly customer-focused. • Team player. • Flexible attitude. • Good IT and organisational skills. • Well-developed interpersonal skills. • Ability to multi-task & work under pressure to achieve deadlines. • Complete required reports on the company s CAFM system. • City & Guilds 2330 Certificate in Electrotechnical Technology at Level 2 & Level 3. • City & Guilds 236 Parts 2. • City & Guilds 2360 Parts 2. • City & Guilds 2351 (All eight units). Please contact Aaron Dawson on (phone number removed) or email (url removed)

M&E Manager 65m Landmark Commercial Retrofit & Extension Central London Our client, a leading Main Contractor, has retained us to recruit an experienced M&E Manager for one of Central London's most technically challenging and prestigious commercial refurbishment projects. This flagship 65m retrofit and extension will transform a historic office building into over 100,000 sq ft of Grade A office accommodation, combining the restoration of the existing structure with innovative engineering and sustainable construction methods. The project includes: Major cut & carve refurbishment works Infilling of an existing central atrium Construction of two additional floors A striking rooftop extension and terrace incorporating a state-of-the-art cross-laminated timber (CLT) structure Extensive structural alterations High-specification CAT A commercial fit-out Complex new MEP installations integrated within an existing building Delivery to ambitious sustainability targets, including BREEAM Excellent and EPC A This is an excellent opportunity for an experienced M&E Manager to play a key role in delivering a technically demanding project where building services are central to the successful integration of new and existing elements. The Role Reporting to the Project Director, the successful candidate will take ownership of all mechanical and electrical packages from pre-construction coordination through installation, commissioning and handover. Key responsibilities include: Managing the delivery of all MEP subcontract packages Reviewing technical designs and ensuring buildability Coordinating MEP services with structural, architectural and fa ade works Driving programme, procurement and installation activities Managing quality assurance, commissioning and testing Ensuring health & safety compliance across all MEP activities Chairing coordination meetings with consultants, subcontractors and the client team Identifying and resolving design and construction clashes Overseeing commissioning, witness testing and final handover documentation Ensuring all services are delivered to programme and the highest quality standards Requirements The successful candidate will have: Previous experience as an M&E Manager working for a Main Contractor Proven experience delivering complex commercial refurbishment, cut & carve or major fit-out projects Strong understanding of both mechanical and electrical building services Experience coordinating MEP installations within existing buildings Excellent knowledge of commissioning, testing and handover processes Ability to manage multiple subcontractors and stakeholders SMSTS, CSCS and relevant health & safety qualifications Strong communication, planning and leadership skills Why Apply? This is an opportunity to join a highly regarded contractor delivering one of London's standout commercial developments. The project combines heritage refurbishment with cutting-edge engineering, including advanced mass timber construction and extensive building services integration. With complex sequencing, challenging coordination and a high-quality finish, it offers an outstanding platform for an experienced M&E Manager looking to work on landmark projects. If you're looking for a technically rewarding role where you can make a genuine impact on a flagship Central London development, we'd love to hear from you. Apply today or get in touch for a confidential discussion.

Job Title: Junior Electrical Project Manager Role Overview We are seeking a Junior Electrical Project Manager who has already gained experience managing elements of electrical or M&E projects and is now looking to take the next step into a more autonomous delivery role. This position is suited to someone who has previously taken responsibility for smaller schemes, packages, or key project workstreams and is looking to build on that experience within a structured project environment. You will work alongside senior project managers but will be expected to take increasing ownership of project delivery. Key Responsibilities Take responsibility for the delivery of defined electrical packages or smaller projects Support and contribute to overall project planning, programming, and coordination Manage subcontractors and site activities to ensure progress aligns with programme Liaise directly with clients, consultants, and internal teams on project matters Review drawings, specifications, and technical submissions and ensure compliance Monitor project costs, assist with variations, and support commercial reporting Ensure works are delivered in line with health and safety requirements and company procedures Attend and contribute to project and site meetings, providing updates on progress and risks Support project close-out, commissioning, and handover processes Candidate Profile This role is aimed at individuals who are already operating at a junior project management level or have had clear exposure to managing project elements. Experience & Skills Demonstrable experience supporting or managing elements of electrical or M&E projects Good understanding of electrical building services systems and installation processes Experience coordinating subcontractors and site activities Ability to read and interpret technical drawings and specifications Exposure to programme management and project sequencing Basic commercial awareness, including cost tracking and variations Strong communication skills and confidence dealing with stakeholders Organised and capable of managing multiple priorities Desirable Experience running smaller projects or packages independently Formal qualifications in Electrical Engineering or Building Services (HNC/HND/Degree) Health and safety certifications such as CSCS, SMSTS, or SSSTS Experience across sectors such as commercial, healthcare, education, or residential Development & Progression This role is designed for someone already on the project management pathway, offering: Increased ownership of project delivery Progression to managing larger and more complex projects Mentorship from senior project leadership Opportunity to develop both technical and commercial responsibility Career progression is expected towards Electrical Project Manager and beyond. Summary This is a step-up opportunity for someone who has already moved beyond a purely technical or trade-based role and is now actively managing elements of projects. It provides the platform to transition into full project ownership, with support while still maintaining real responsibility from day one. Interested? Click apply now! For more information call Aaron on (phone number removed) or email your CV to (url removed)

Fire Alarm Engineer Location: Chelmsford, London Salary: £40,000 - £50,000 per annum (depending on experience) Job Type: Permanent Benefits: Company Van & Fuel Card, Holiday Pay, Pension, Healthcare etc About the Role We are currently recruiting for an experienced Fire Alarm Engineer to join a well-established building services contractor based in Chelmsford. This is a permanent opportunity offering a competitive salary, company van, and fuel card. The successful candidate will be responsible for the installation, commissioning, servicing, maintenance, and fault finding of a variety of fire alarm systems across commercial and residential properties. Key Responsibilities Install, service, maintain, and repair fire alarm systems. Diagnose and rectify faults efficiently to minimise system downtime. Commission new fire alarm installations. Carry out planned preventative maintenance (PPM) and reactive call-outs. Work on a range of manufacturer systems, ensuring compliance with current industry standards. Complete all relevant documentation and service reports accurately. Liaise professionally with clients, site managers, and colleagues. Ensure all work is carried out in accordance with BS 5839 and current health and safety regulations. Maintain company vehicle, tools, and equipment. Requirements Proven experience as a Fire Alarm Engineer. Strong fault-finding and diagnostic skills. Experience installing, servicing, and commissioning fire alarm systems. Experience working with a range of fire alarm manufacturers (such as Gent, Advanced, Morley, Kentec, C-TEC, Apollo, Hochiki, Notifier, or similar). Good understanding of BS 5839 and relevant fire safety standards. Full UK driving licence. Excellent communication and customer service skills. Ability to work independently and manage your own workload. What's on Offer? Salary of £40,000 - £50,000 depending on experience. Company van. Fuel card. Permanent, full-time position. Opportunity to work for a reputable building services contractor. Ongoing training and career development. Supportive and professional working environment. If you're an experienced Fire Alarm Engineer looking to join a growing business with excellent long-term opportunities, we'd love to hear from you. Apply today with your CV for immediate consideration.

Vacancy Summary Job Title: Electrical Technical Manager (Lead) Job Type: Permanent Job Ref: Location: South East London - Zone 1 (Flexible working available) Start Date: ASAP Salary: c 100k- 120k basic plus competitive package inc car or allowance, mileage to site, pension, health, bonus etc. Company & Project: A Top 50 Main contractor is seeking to recruit a talented and experienced Electrical Technical Manager to lead technical and design excellence across the regional business, taking full ownership of the delivery and formal sign-off of all electrical engineering design documentation. Working across multiple projects, specialising in the early stages through pre-construction to project commencement, driving execution across RIBA Plan of Work and Design Framework for Building Services Stages 3 to 6. Our client has an enviable track record on projects c 50m+ and have delivered projects on a repeat basis in London and the South. Duties & Responsibilities: Here is a redacted, generalized version of the duties tailored for a job advertisement. Internal company frameworks, specific project titles, and company names (like "BYUK") have been removed or translated into standard industry terms to maintain anonymity. Key Responsibilities Serve as a core member of the specialised MEP strategy team, supporting senior directors in delivering design and technical engineering management strategies - specialising in Electrical. Provide direct line management, technical coaching, and mentoring to a team of Electrical engineers; offer guidance to external consultants, Project Managers, and Project Engineers. Act as the lead technical authority for allocated projects, with specific oversight of electrical engineering elements and technical authorisation of major packages, plant, and equipment. Manage external consultant appointments, monitor design progress, and lead granular design reviews to ensure compliance and quality. Act as the primary point of contact for clients, technical consultants, and digital engineering partners on assigned projects. Maintain technical ownership of all project risks and opportunities, driving value engineering and value management processes. Lead safety initiatives and ensure strict compliance with CDM regulations. Validate on-site installations and system operations against approved designs, providing technical troubleshooting and resolution support as required. Desirable Experience: 10years+ experience within a UK main contractor or major MEP subcontractor environment. In-depth knowledge of Electrical building services and the integration of multidisciplinary MEP packages. Proven ability to manage the front-end lifecycle, including tendering, design coordination, and BIM workflows. Previous Roles: Building Services Manager OR Electrical Manager OR M&E Design Manager OR Electrical Design Manager OR Project Director OR M&E Director OR M&E Project Manager. Qualifications & Skills: Relevant Electrical or Building Services qualification for example, HND or Degree or City & Guilds. Application Process: If you would like more information on this Electrical Technical Manager position or any other vacancy please email your current CV through to Jess Quinn; where it will be reviewed and you will be contacted within 48 hours if your CV is of interest. Services advertised by Apple Technical Recruitment are that of an Employment Agency/Business.