26 jobs found

Gas Engineer Commercial Environments Flexible Hours 47K Base OTE 55-60K Travel Time Package 34 days holiday etc. We are actively recruiting for a Gas Engineer to carry out planned maintenance, scheduled servicing, fault finding and repairs to a range of commercial gas fired heating equipment such as commercial boilers, domestic boilers, S-plan / Y-plan, vented & un-vented systems, water heaters, component replacements such as pumps, valves, thermostats, sensors, actuators, expansion vessels and controls etc. As a mobile Gas Engineer, you will be working within a 90 minute radius of Bournemouth covering areas predominately in Dorset, Hampshire, Wiltshire regions. You will be paid your travel time following 30 minutes each way or if hours are deemed "unsociable" in the mornings (ie: leaving home at 6am) then you will be paid x1.5 rate for your time after 30 minutes. If daily hours exceed 9.5 hours out of the house including travelling time, then you will also be paid x1.5 rate for this time. Hours are flexible, meaning expectations are 9.5 hours out of the house from whenever you leave home, ie: leave home at 6am, back by 3:30. Leve home at 7am, home by 4:30pm. Employment Package Summary: Role: Gas Engineer Status: Permanent, PAYE - Paid Monthly Environments: Commercial - retail Location: 90 minute radius of Reading Base Salary: 47,000 Expected Earnings: 55,000 - 60,000 Hours: 9.5 hours daily out of the house including travel time, ie: 6am-3:30pm / 7am-4:30pm OR paid overtime from these times. Ie: Leave home at 6:00am to arrive on-site for 07:30am (paid 1 hour at x1.5 rate). Paid overtime rates (x1.5) from 3:30pm onwards including full travel time on the way home. Overtime: high amounts available, self scheduled on PDA system without having to ask. x1.5 rate Monday-Saturday. x2 rate Sundays and Bank Holidays. Call out rota: 1 in 8 weeks. 100 per week standby + minimum 4 hours pay if called out. Holidays: 26 days + bank holidays - total 34 days with option to buy more or sell days back to the company. Pension - up to 8% match scheme. Company van provided (business use), fuel card, uniform, income protection, death in service scheme, retailer discounts etc. Requirements: Must have experience within servicing and breakdown duties on boilers and gas fired heating systems. Must holds CCN1, Core Domestic Gas Higly advantageous but not essential: COCN1 / CODNCO1 - ACS Core Commercial Gas. City & Guilds / NVQ Level 2/3 qualifications are preferable but not essential. Must hold a full UK driving license with 9 points or less. If you are an experienced Gas Engineer and would be interested in discussing this role further then please apply today by submitting a CV.

Installed, exchanged, commissioned and maintained smart gas and electricity meters in domestic properties. Carried out dual-fuel metering installations in accordance with industry standards, company procedures and health & safety requirements. Completed meter upgrades, replacements, fault finding and remedial works on a range of smart metering equipment. Tested and commissioned meters to ensure correct operation, communication and accurate readings. Diagnosed and resolved gas and electrical metering faults efficiently while maintaining high standards of workmanship. Completed all required safety checks, including gas tightness testing, electrical checks and visual inspections. Provided customers with clear information regarding smart meters, energy usage, meter operation and safety. Maintained accurate job records, photographs, meter readings and installation documentation using handheld/mobile technology. Managed a daily schedule of appointments while maintaining high levels of productivity, punctuality and customer service. Worked independently while adhering to company procedures, industry regulations and relevant health & safety legislation. Identified potential safety issues and reported defects or remedial requirements appropriately. Maintained professional relationships with customers, energy suppliers and operational teams. Consistently delivered high-quality installations while meeting productivity, compliance and customer satisfaction targets.

Gas Engineer Commercial Environments Flexible Hours 47K Base OTE 55-60K Travel Time Package 34 days holiday etc. We are actively recruiting for a Gas Engineer to carry out planned maintenance, scheduled servicing, fault finding and repairs to a range of commercial gas fired heating equipment such as commercial boilers, domestic boilers, S-plan / Y-plan, vented & un-vented systems, water heaters, component replacements such as pumps, valves, thermostats, sensors, actuators, expansion vessels and controls etc. As a mobile Gas Engineer, you will be working within a 90 minute radius of Brighton covering areas predominately in West Sussex, Surrey & Kent regions. You will be paid your travel time following 30 minutes each way or if hours are deemed "unsociable" in the mornings (ie: leaving home at 6am) then you will be paid x1.5 rate for your time after 30 minutes. If daily hours exceed 9.5 hours out of the house including travelling time, then you will also be paid x1.5 rate for this time. Hours are flexible, meaning expectations are 9.5 hours out of the house from whenever you leave home, ie: leave home at 6am, back by 3:30. Leve home at 7am, home by 4:30pm. Employment Package Summary: Role: Gas Engineer Status: Permanent, PAYE - Paid Monthly Environments: Commercial - retail Location: 90 minute radius of Brighton Base Salary: 47,000 Expected Earnings: 55,000 - 60,000 Hours: 9.5 hours daily out of the house including travel time, ie: 6am-3:30pm / 7am-4:30pm OR paid overtime from these times. Ie: Leave home at 6:00am to arrive on-site for 07:30am (paid 1 hour at x1.5 rate). Paid overtime rates (x1.5) from 3:30pm onwards including full travel time on the way home. Overtime: high amounts available, self scheduled on PDA system without having to ask. x1.5 rate Monday-Saturday. x2 rate Sundays and Bank Holidays. Call out rota: 1 in 8 weeks. 100 per week standby + minimum 4 hours pay if called out. Holidays: 26 days + bank holidays - total 34 days with option to buy more or sell days back to the company. Pension - up to 8% match scheme. Company van provided (business use), fuel card, uniform, income protection, death in service scheme, retailer discounts etc. Requirements: Must have experience within servicing and breakdown duties on boilers and gas fired heating systems. Must holds CCN1, Core Domestic Gas Higly advantageous but not essential: COCN1 / CODNCO1 - ACS Core Commercial Gas. City & Guilds / NVQ Level 2/3 qualifications are preferable but not essential. Must hold a full UK driving license with 9 points or less. If you are an experienced Gas Engineer and would be interested in discussing this role further then please apply today by submitting a CV.

Gas & Heating Engineer We are currently recruiting for an experienced Gas & Heating Engineer to join an established and growing business based in Belfast, working across Greater Belfast and County Down, carrying out maintenance and repair works. The company provides gas and oil installation, maintenance and repair services across Northern Ireland, working with a varied client base including Housing Associations, Health Trusts, the Education Authority, Facilities Management companies and Local Councils. Following the award of several new long-term contracts, they are looking to expand their engineering team with an experienced Gas & Heating Engineer. The Role As a Gas & Heating Engineer, your responsibilities will include: Carrying out reactive gas boiler maintenance and repairs Fault-finding and diagnosing boiler issues Carrying out planned boiler servicing Working across a variety of client properties throughout Greater Belfast and County Down Completing all required paperwork using a company-supplied tablet Ensuring work is completed safely, efficiently and within contractual deadlines Delivering a professional service to customers and clients What We're Looking For NVQ Level 3 in Plumbing & Heating Current Gas Safe and/or OFTEC qualifications Previous experience servicing, maintaining and fault-finding on boilers Experience carrying out heating and boiler installation work Full UK driving licence Ability to work independently and manage a mobile workload Good communication and customer service skills A valid AccessNI Basic Disclosure Certificate will be required for the position What's on Offer 15.50 - 17.50 per hour 8:00am - 5:00pm Permanent, full-time position Optional overtime On-call bonus Training and development opportunities Company pension scheme Company van provided from day one Company tablet Company uniform This is an excellent opportunity for an experienced Gas & Heating Engineer looking for a permanent position with an established company that has secured a number of long-term contracts across Greater Belfast and County Down. To apply, please submit your CV.

Job Title: Air-Conditioning & Refrigeration Technician Salary: £40,000 plus overtime & benefits Location: Midlands based, in the field Contract: Permanent - 40 Hours per week Role Purpose To provide a mobile Refrigeration / Air Conditioning services, both regular planned service against pre-agreed schedules and reactive work and urgent breakdown, plus installation of new equipment. Main Duties and Responsibilities Assembling and installing air conditioning, refrigeration and ventilation systems and components. Fault diagnosis on various systems i.e., Splits, Twin, Multi, VRF and Chillers. Carry out leak test in compliance with the F Gas Regulations. Repair and replace defective parts of AC and Refrigeration systems as and when required. Recommending, developing, and performing preventative maintenance procedures. Identifying refrigeration faults and system malfunctions. Adhering to applicable standards, safety procedures and policies To provide callout response for customers as detailed on the weekly callout rota. To work an amount of overtime to complete chargeable out-of-hours PPM and reactive work. Ensuring reports and commissioning sheets are kept to a high standard. To ensure equipment and surrounding area conform to agreed company standards. Provide a professional service in a way which ensures customer satisfaction. To be fully aware of contractual requirements and customer needs at all times To evaluate performance and ensure proper servicing and maintenance of equipment under contract to the company is carried out. Liaise with clients and internal departments to build effective relationships ensuring that the image presented suitably represents the high standards required by the Company. Supporting selection and procurement of materials, tools and equipment required including supplier and internal liaison. Qualifications & Experience C & G Level 2 Refrigeration & Air Conditioning or NVQ equivalent F Gas Certified IPAF PASMA Full, Clean Drivers Licence Good technical knowledge of various Split Air Conditioning and VRV/VRF equipment. Small Chillers (up to 10kw) All round Mechanical Engineering All round Electrical Engineering AHU's & HR Systems Closing date is 19th September 2026 Hawk 3 Talent Solutions are acting as an Employment Agency on behalf of its client To Apply please follow the application process for the site this job is advertised on or email your CV to (url removed) By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Your new company We are currently recruiting on behalf of a leading organisation that delivers facilities management and accommodation maintenance services across the UK Defence estate, supporting military personnel and their operational requirements. Your new role We are currently recruiting for an experienced Facilities Service Manager to join a high-performing facilities management team responsible for delivering maintenance services across a complex operational estate. Reporting to the Built Estate Manager, this role will require you to manage the delivery and assurance of all reactive and programmed maintenance and Billable Works on site, ensuring that all Health & Safety requirements are met. This role will see you oversee the delivery of reactive & programmed maintenance on the Establishment to ensure key performance indicators are met and tasks are completed to a standard that meets the contractual 'First Time Fix's requirements, undertake programmed maintenance inspections and assurance activities, provide Technical support and advice as required from representatives for review. All Inspection Reports and certification raise the necessary remedial tasking and SONs for work. You will also work closely with Mobile APs to ensure that all applicable works conform to the requirements of JSP 375, identify Opportunities to reduce energy consumption on site and initiate Billable Works as appropriate by the raising of Statements of Need, manage FGas and waste compliance within the establishment, support the Line Manager in providing optimal solutions to customer requirements, including acting as single point of contact to resolve end-user issues, and ensure that all complaints are resolved in a timely and satisfactory manner. A strong understanding of compliance and assurance is essential. You will ensure all maintenance activities are delivered in accordance with statutory, contractual, and health and safety requirements, maintaining robust records through CAFM systems and ensuring all associated documentation remains accurate and up to date. Key Responsibilities Lead and coordinate the delivery of reactive maintenance, PPM, remedial works, and Billable Works. Manage contractor and supplier performance to ensure service excellence, value for money, and compliance with contractual obligations. Monitor operational performance, identifying risks and implementing solutions to maintain service delivery standards. Build and maintain strong relationships with customers, stakeholders, and operational teams. Ensure all activities are delivered in line with health, safety, environmental, and statutory requirements. Maintain accurate asset, compliance, and maintenance records within CAFM systems. Support the planning, mobilisation, and successful delivery of additional works and minor projects. Conduct assurance checks and drive continuous improvement across service delivery. Provide technical guidance and support to operational teams and stakeholders. Full time - Monday to FridayColerne, Wiltshire What you'll need to succeed The ideal candidate will:- Proven experience managing service delivery within facilities management, property maintenance, engineering, or a similar operational environment.- Strong understanding of reactive maintenance, planned preventative maintenance (PPM), remedial works, safe systems of work, and statutory compliance requirements.- Experience coordinating and managing contractors, suppliers, and operational teams to deliver services against performance targets and KPIs.- Technical background in an electrical or mechanical discipline, ideally supported by a Level 3 qualification or equivalent practical experience.- Knowledge of CAFM systems and industry standards such as JSP 375, SFG20, and health and safety management processes.- Excellent organisational skills with the ability to manage multiple priorities, solve problems proactively, and maintain attention to detail.- Strong communication and stakeholder management skills, with the ability to build effective relationships at all levels.- Experience within facilities management, defence contracts, or other regulated estates would be advantageous.- Relevant qualifications such as IOSH Managing Safely, NEBOSH, SMSTS, or CDM Awareness are desirable.- A customer-focused, solutions-driven approach with a commitment to delivering safe, compliant, and high-quality services.- Ability to obtain and maintain SC Security Clearance vetting. What you'll get in return The successful candidate will receive a salary between 40,000- 45000 per annum dependant on experience, as well as: 6% matched pension contribution 25 days annual leave, plus bank holidays Private medical insurance (single cover) Life assurance of 2x annual salary What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Join us at an exciting time of growth and build a secure future with us. There's never been a more exciting time to join Plymouth Community Homes as we invest in our homes, our communities and our people. About the role As a Gas Servicing & Breakdown Engineer, you'll play a vital role in ensuring residents across Plymouth enjoy safe, warm and well-maintained homes. This varied and rewarding position combines gas servicing, safety inspections, fault diagnosis and breakdown repairs, giving you the opportunity to utilise and further develop your technical expertise every day. Please note: This position requires participation in a rotating out-of-hours emergency service, which includes some evening and weekend work. Your responsibilities will include: Carrying out domestic landlord gas safety inspections and servicing Diagnosing and repairing gas and heating system faults Conducting inspections and identifying corrective works Completing all relevant certification and compliance documentation Ensuring all work is undertaken safely and in line with current gas regulations Providing an excellent customer experience during every visit Working collaboratively with colleagues while managing your own workload effectively No two days are the same, making this an ideal opportunity for a skilled engineer who enjoys problem-solving and delivering high-quality workmanship. Our ideal candidate for this role is someone who: We're seeking a motivated and customer-focused Gas Engineer who wants to continue developing their career and contribute to a high-performing team. You will have: Current ACS qualifications including: - CCN1 - CPA1 - CENWAT - CKR1 - HTR1 Or recognised equivalent qualifications Proven experience in a gas servicing, breakdown or maintenance role Strong fault-finding and diagnostic skills Good working knowledge of gas safety legislation and Health & Safety requirements Experience using handheld electronic devices or mobile technology (desirable) The ability to work independently while contributing positively to a wider team A flexible and proactive approach to work A commitment to delivering exceptional customer service A full UK driving licence A company van will be provided for business use. About Plymouth Community Homes We are the city s largest social housing association, with over 16,000 properties providing homes for more than 35,000 people, and we re aiming to grow, to provide more people with high-quality, affordable homes to rent and buy. With a great workforce and a focus on people, we deliver good quality, well-managed and well-maintained homes. What we can offer you: At PCH, we recognise that our people are central to our success. We're committed to creating an environment where employees can grow, develop and build long-term careers. By joining our team, you'll benefit from: A competitive salary On-call payments and overtime opportunities, currently averaging an additional £2,000 per year Excellent defined contribution pension scheme with generous employer contributions 25 days annual leave on joining, increasing to up to 30 days after five years' service, plus bank holidays Free access to our on-site gym Significant investment in learning, training and professional development The opportunity to work and build your career in one of the South West's most vibrant waterfront cities The chance to be part of an organisation with ambitious growth plans and a strong social purpose To Apply: If you're looking for a role where your skills are valued, your development is encouraged and your work genuinely makes a difference, we'd love to hear from you. Please submit your CV and supporting application, demonstrating how your knowledge, skills and experience meet the requirements of the role. For an informal discussion about the position, please contact: Paul Crook, Gas & Plumbing Operations Manager (phone number removed) Your next career move starts here. Apply today. Applications will be reviewed and shortlisted as they come in. We are a committed Equal Opportunities employer. We welcome applications from suitably talented people from any community and background. Living and Working in Plymouth

Why Join KSD Support Services? Fully equipped company van for Business use Door to door pay Fuel card - no fuel costs Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a Gas Safe registered Commercial Gas Engineer to join our team, carrying out installation, maintenance, and repair of commercial gas systems and appliances across multiple sites in Bristol. Day-to-day you'll be: Installing, testing, and commissioning commercial gas appliances (boilers, Ambi rads, overhead radiant tube heaters) Installing associated pipework and controls Conducting planned preventative maintenance (PPM) and reactive maintenance Diagnosing and repairing faults on commercial gas systems and plant rooms Carrying out routine servicing in line with manufacturer specifications Liaising professionally with customers and providing clear communication Maintaining a clean and safe working environment Building great relationships with clients Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On-call Rota: Approx every 1 in 6 weeks What You'll Need Essential: Full UK Driving License Valid Gas Safe Registration (with domestic and commercial categories) Commercial gas ACS qualifications: CODNCO1, TPCP1, ICPN1, CIGA1, CDGA, CORT1 CCN1, CENWAT, CPA1 PASMA ticket MEWPs certification Proven experience in commercial environments Strong fault-finding and problem-solving skills Great communication skills and can-do attitude Desirable: NVQ Level 2 or 3 in Plumbing and Heating (or equivalent) Knowledge of Building Regulations and British Standards Experience with controls and Building Management Systems (BMS) Ready to Apply? If you're a Gas Safe registered commercial engineer looking for a stable role with a reputable company, excellent benefits, and real career progression opportunities, we'd love to hear from you.

Mobile Commercial Gas Engineer Location: South East London (Mobile) Salary: 52,000 per annum + Company Van & Fuel Card Working Hours: Monday - Friday (Standard Day Shift) About the Role We are seeking an experienced Mobile Commercial Gas & FGAS Engineer to cover commercial sites across South East London. In this role, you will be responsible for planned preventative maintenance (PPM), reactive repairs, and fault finding across commercial heating, boiler plant rooms, and air conditioning/HVAC systems. Key Responsibilities Planned & Reactive Maintenance: Carry out routine PPMs, servicing, and reactive breakdown repairs on commercial heating systems, boilers, water heaters, and AC equipment. Diagnostics & Fault Finding: Inspect, troubleshoot, and repair mechanical plant room issues and refrigeration/HVAC circuits efficiently. Compliance & Safety: Ensure all work adheres to Gas Safe regulations, F-Gas compliance standards, and British Safety regulations. System Testing: Perform gas tightness testing, flue gas analysis, and complete digital job sheets via CAFM / mobile software. Client Engagement: Act as a professional technical point of contact for on-site facility managers and building owners. Requirements & Qualifications Essential Qualification / Skill Details Commercial Gas Certification Valid ACS Commercial Gas tickets (COCN1 / CODNCO1, CIGA1, CORT1, CDGA1, ICPN1) F-Gas Certification Category 1 F-Gas (City & Guilds 2079 / CITB) Driving Licence Full UK Driving Licence (clean or low points) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job Title: Mobile A/C Engineer Location: South London (Static commercial sites) Salary: 45,000 + OT + Van & Fuel Card Hours: Monday - Friday On-Call: 1 in 5 rotation ( 100 standby allowance) Role Overview We are hiring a Mobile A/C Engineer to deliver maintenance and repairs across static commercial sites in South London. You will work extensively on splits, multi-splits, VRV/VRF systems, and VAV (Variable Air Volume) terminal units. Key Responsibilities Splits & Multi-Splits: Routine servicing, filter changes, leak checks, coil cleaning, and compressor diagnostics. VAV Units: Airflow balancing, actuator/damper troubleshooting, controller setup, and reheater coil maintenance. Commercial A/C Equipment: PPMs, fault-finding, major component replacement, and reactive repairs on VRV/VRF systems and air handling plant. Compliance: Complete F-Gas logbooks, maintain compliance records, and join the 1 in 5 call-out rota. Requirements NVQ Level 2/3 in A/C & Refrigeration + valid F-Gas Category 1 (2079). Strong hands-on experience with VAV boxes, splits, and commercial A/C systems. Full UK driving license and proximity to South London. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Urgently Required Mobile Commercial HVAC Engineer (Gas bias) OTE 50-55K My client is a provider of M&E building services engineering and facilities management, providing a high specification client base with tailored and bespoke technical solutions incorporating both maintenance & projects. A Mobile Commercial Gas Engineer is required to carry out PPM, servicing, fault finding and breakdown repairs to commercial gas heating systems i.e. boilers, gas fired heating, LPHW & radiant/plaque as well as a 'first-look' at HVAC systems i.e. AHU/FCU within a variety of client environments to include (not limited to) commercial offices, corporate buildings & retail environments located throughout the Wolverhampton/Birmingham area. Essential Candidate Requirements & Additional Information Commercial ACS Gas: COCN1, CODNCO1, ICPN1, CIGA1, CDGA1, CORT1 TPCP1a 45,000 salary Possess strong servicing, fault finding and repair skills Possess a sound knowledge and understanding of commercial gas & heating systems A basic knowledge and appreciation of HVAC & general building services maintenance Experienced in performing PPM to commercial gas heating systems within commercial, corporate, education and leisure & retail environments Driving License (Maximum 6 Penalty Points) Additional Information Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 6 Call-out runs from Friday - Friday Call-out paid at 70 a week Monday to Thursday 08.00 to 16.30 with a 30-minute lunch break Friday 08:00 to 15:30 Overtime - Saturday after 12.00 and Sunday & Bank/Public Holidays is double time. 25 days holiday + stat days + Birthday Pension - contribution 3% Other benefits included.

Why Join KSD Support Services as a HVAC Engineer? Fully equipped company van for Business use Fuel card - no fuel costs Door to door pay Trade cards provided Company mobile phone/tablet Full uniform and PPE kit supplied Regular overtime available Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The HVAC Engineer Role We're looking for an experienced HVAC Engineer to join our team, working across commercial sites in the London area. You'll be responsible for installation, maintenance, and repair of heating, ventilation, and air conditioning systems. Main Responsibilities of the HVAC Engineer: Installing and commissioning HVAC components (pipework, ductwork, control panels) Executing planned preventative maintenance programmes Carrying out reactive maintenance, fault diagnosis, and emergency repairs Conducting quality checks and performance testing Providing technical guidance to clients Maintaining accurate records and documentation HVAC Engineer Hours: 45 hours per week On-call: 1 in 6 weeks rota What You'll Need HVAC Engineer Essential Requirements: F-Gas Certification (Category I minimum) NVQ Level 2 or 3 in Refrigeration & Air Conditioning (Level 3 preferred) CSCS Card Full UK Driving License Proven HVAC maintenance and repair experience Strong fault-finding and diagnostic skills Excellent communication and customer service IT proficient (Excel, Outlook, Word) HVAC Engineer Desirable Requirements: Facilities management experience First Aid at Work Asbestos Awareness, IPAF, PASMA UKPIA/SPA Safety Passport Ready to Apply for the HVAC Engineer role? If you're an experienced HVAC engineer looking for a stable role with excellent benefits, competitive pay, and real career development, we'd love to hear from you.

Project Manager / Technical Sales - Air Conditioning Installation HVAC Salary: Excellent Salary (Depending on Experience) + Performance Bonus + Company Vehicle / Car Allowance + Phone + Laptop + Pension + Ongoing Training Location: London & Home Counties (Hybrid Site & Office Based) Full Time Permanent An exciting opportunity has arisen for an Air Conditioning Installation Project Manager / Technical Sales professional to join a growing HVAC specialist delivering high-quality installation projects across London and the Home Counties. This Air Conditioning Installation Project Manager / Technical Sales role combines technical project management with client-facing sales, making it ideal for someone who enjoys managing projects whilst developing long-term customer relationships. The successful Air Conditioning Installation Project Manager / Technical Sales candidate will oversee projects from enquiry through to completion whilst identifying opportunities to grow the business. If you're an experienced Air Conditioning Installation Project Manager / Technical Sales professional looking for greater responsibility and career progression, this could be the ideal next step. About the Company Established in Italy during the 1970s, this business has earned an excellent reputation for designing and manufacturing innovative, energy-efficient air conditioning systems. Its product range includes market-leading water-condensed systems that remove the need for external units, providing practical solutions for listed buildings, apartments, commercial properties and developments with planning restrictions. The UK business supports customers across London and the Home Counties, providing technical expertise, installation, commissioning and aftersales support. Continued growth has created an opportunity for an experienced HVAC professional to join the team and play an important role in future expansion. Why Join? This position offers genuine variety, combining technical project delivery with commercial responsibility. You'll have the opportunity to manage installation projects from initial survey through to handover whilst developing relationships with contractors, consultants, facilities management companies and end users. Working closely with the directors, you'll have the autonomy to influence projects, win new business and contribute to the continued success of a growing company that values technical knowledge, customer service and long-term relationships. The Role You will be responsible for managing air conditioning installation projects whilst supporting business development and technical sales activities. Your duties will include: Carrying out site surveys and assessing customer requirements Designing and specifying suitable air conditioning solutions Producing quotations, estimates and technical proposals Managing installation projects from order through to completion Planning labour, materials and subcontractor activities Monitoring project programmes, quality and profitability Ensuring projects are delivered safely, on time and within budget Attending client and site meetings throughout project delivery Preparing RAMS, project documentation and O&M manuals Building relationships with contractors, consultants, FM providers and end users Identifying opportunities for replacement, upgrade and energy-efficient HVAC systems Working towards agreed sales and margin targets Representing the business professionally at customer meetings and site visits About You We're looking for someone with a strong technical background who enjoys both project delivery and developing customer relationships. Ideally you will have: At least 3 years' experience within the air conditioning or HVAC industry Strong knowledge of split, multi-split, VRF, VRV and ventilation systems Experience managing air conditioning installation projects The ability to prepare quotations, estimates and technical proposals The following would be advantageous: Technical sales or business development experience F-Gas Certification SMSTS or SSSTS Experience within high-end residential projects Experience working with commercial HVAC contractors or facilities management companies Salary & Benefits Excellent salary depending on experience Performance-related bonus Company vehicle or car allowance Mobile phone and laptop Pension scheme Ongoing manufacturer and technical training Clear opportunities for career progression Full-time permanent position within a growing business Whether you're currently an Air Conditioning Project Manager, HVAC Project Engineer, Contracts Manager, Senior Air Conditioning Engineer or Technical Sales Engineer, this role offers the opportunity to combine your technical expertise with commercial responsibility in a business with ambitious growth plans. Contact Mark at Up Front Recruitment for more information.

Mobile Combustion Engineer Birmingham - The majority of the work will be based in the West Midlands covering Birmingham and Stoke-on-Trent but it will also cover other parts of the Midlands. 43,000 + Van and Fuel Card Brief Mobile Combustion Engineer needed for a large well known Facilities Management organisation based in Birmingham who are looking to employ an experienced and well-rounded Mobile Combustion Engineer that takes pride in their work. The successful candidate must have a City & Guilds Level 3 in Plumbing and have a keen interest in becoming a Mobile Combustion Engineer. Benefits Salary: 40,000 - 43,000 per annum Van and Fuel Card All tools provided 24 day's holiday Pension Plan Career Progression What the role entails: Some of the main duties of the Mobile Combustion Engineer will include: Working on the following equipment but not limited to; Commercial Boilers, Associated Gas Equipment, Gas Fire Radiant Heaters, Water Heaters, Control valves, Domestic Boilers Cover numerous sites that fall within the contract such as Stoke Schools and Guide Dogs Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator Complete supplementary documentation / E-Forms relating to the maintenance task as dictated by your line manager Update customers CAFM system in real time with start/wait/stop completion times and provide full description of works undertaken, advising of any follow-on works required Ensure reactive tasks throughout the sites are completed and be proactive in highlighting areas where improvements can be made. Identify and record all plant failures using quotation forms and issue to line manager. This is to be indicated and recorded within the CAFM system Take part in the on call rota What experience you need to be the successful Mobile Combustion Engineer : A recognised industry qualification will be required, and previous experience is essential CCN1: Core Domestic Gas Safety (mandatory for domestic work) COCN1: Core Commercial Gas Safety (mandatory for commercial work) CPA1: Combustion Performance Analysis (often bundled with core) 1,2 Domestic (Natural Gas): CENWAT (boilers) Commercial/Industrial: Includes CODNCO1 (domestic to commercial switch) CIGA1/CDGA1: (commercial appliances), and pipework certifications like ICPN1 BMP1: Gas boosters Medium pressure CCP1: Commission of commercial plant CDGA1: Commission, Service Direct Fired Heaters C&G Level 3 Plumbing Trade qualified Combustion Engineer with appropriate post apprenticeship experience desirable Commercial & Domestic Boiler experience Must have a full drivers' licence This really is a fantastic opportunity for a Mobile Combustion Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

About the Multi-Skilled Engineer Role An established facilities management and property services provider is seeking three experienced Multi-Skilled Engineers to support a diverse commercial property portfolio across Milton Keynes and Cambridge. The Multi-Skilled Engineer will take a proactive, engineering-led approach to improving asset performance, reliability and safety. Using asset information, maintenance history and digital building data, the successful candidate will identify faults, reduce operational risk and resolve issues before they develop into major failures. Key Responsibilities As a Multi-Skilled Engineer , your responsibilities will include: Delivering planned preventative maintenance, reactive repairs and minor works. Maintaining mechanical, electrical and building fabric systems. Diagnosing faults, identifying root causes and implementing permanent corrective actions. Completing statutory inspections, testing and maintenance in line with current legislation. Maintaining HVAC systems, AHUs, FCUs, pumps, ventilation, lighting, plumbing and LV systems. Using BMS, CAFM systems and mobile technology to record and manage maintenance activity. Working with technical teams, bureau engineers and specialist supply chain partners. Identifying opportunities to improve asset reliability and engineering performance. Multi-Skilled Engineer Experience The successful Multi-Skilled Engineer must have previous multi-skilled maintenance experience within commercial building services. Strong fault-finding, diagnostic and problem-solving skills are essential. Applicants should have experience working with mechanical, electrical and basic building fabric systems, including HVAC equipment, pumps, ventilation, lighting, plumbing and BMS controls. Qualifications The Multi-Skilled Engineer must hold an NVQ Level 3, or equivalent, in Mechanical or Electrical Engineering, or a recognised industry trade qualification. A full UK driving licence is essential. Desirable qualifications include: 18th Edition Wiring Regulations F-Gas certification IPAF or PASMA Water Hygiene certification BMS awareness Working Arrangements This is a mobile Multi-Skilled Engineer position covering sites across Milton Keynes and Cambridge. All engineers must complete the employer's internal engineering academy programme and maintain annual accreditation. Candidates should also demonstrate an interest in artificial intelligence, digital technologies and continuous professional development. Benefits The package includes 25 days' annual leave plus bank holidays, an additional wellbeing day, pension, life cover, paid sick leave, healthcare cash plan, virtual GP access, enhanced family leave, employee discounts, cycle-to-work scheme and holiday purchase options. Apply today to progress your career as a Multi-Skilled Engineer with a forward-thinking property and facilities management organisation. Location: Milton Keynes and Cambridge Salary: 38,000- 42,000 per annum, depending on experience

Commercial Gas Engineer Location: Central Belt, Scotland Salary: Up to 55,000 + Door-to-Door Travel + Overtime + Company Van & Fuel Card We're working with a leading Building Services and Energy company to recruit an experienced Commercial Gas Engineer to join their growing team covering the Central Belt of Scotland. This is an excellent opportunity for a technically strong engineer looking to join a well-established business offering an excellent salary, door-to-door travel and long-term career progression. The Role As a Mobile Commercial Gas Engineer, you will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance, fault finding, repairs and commercial gas installations across a variety of commercial properties throughout the Central Belt. This is a varied role where you'll be expected to work independently while delivering a high standard of workmanship and customer service. Key Responsibilities Carry out PPM and reactive maintenance on commercial gas systems. Diagnose faults and complete repairs on commercial heating equipment. Install, service and commission commercial gas appliances. Work on forced draught burners and associated plant. Carry out electrical fault finding on commercial heating systems and controls. Complete all relevant paperwork and compliance documentation. Ensure all work is completed safely and in line with current Gas Safe regulations. Build and maintain strong client relationships. Requirements Commercial Gas Qualifications including COCN1, CIGA1, ICPN1, CORT1 and TPCP1A. Proven experience working on forced draught burners. Strong electrical fault-finding ability. Ideally hold Commercial Gas Testing & Purging qualifications. Experience carrying out both commercial gas installations and maintenance. Full UK Driving Licence. Excellent customer service and communication skills. Package Salary up to 55,000 DOE. Door-to-door travel paid. Company van and fuel card. Overtime opportunities. Ongoing training and development. Pension scheme. Company uniform and tools provided. If you're an experienced Commercial Gas Engineer looking to join a forward-thinking business with an excellent package and genuine long-term opportunities, we'd love to hear from you. To apply, please send your CV or contact Rebecca at FM Search & Select for a confidential discussion.

Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.

Are you an experienced Commercial Gas Engineer looking to join a fast-growing, dynamic specialist maintenance business? Due to continuous growth and key contract wins across North East England, we are seeking a customer-focused, skilled Gas Engineer to deliver planned preventative maintenance (PPM), reactive repairs, and commissioning across a diverse and high-profile commercial property portfolio. You will cover a rich variety of sectors including Healthcare, Retail, Hospitality, and Leisure, ensuring no two days are the same while benefiting from genuine opportunities for long-term career progression and paid professional development. KEY RESPONSIBILITIES Perform servicing, fault-finding, maintenance, and emergency repairs on commercial gas appliances, plant, and heating systems. Carry out routine safety inspections, gas testing, purging, and issue appropriate CP12/commercial safety certification. Work across commercial plant rooms, boilers, hot water systems, and associated mechanical controls. Complete detailed digital job reports and compliance documentation via tablet/mobile app. Participate in a manageable call-out rota to support key commercial heating contracts across the region. Maintain excellent client relationships while acting as a key technical ambassador for the company on site. REQUIREMENTS & QUALIFICATIONS Commercial Gas Tickets (Essential): Valid Commercial Gas Safety qualifications (COCN1 or CODNCO1, CORT1, CTP1, CDGA1, ICPN1, etc.). Domestic Gas (Desirable): Domestic Gas Safety tickets (CCN1) are advantageous. Experience: Proven experience servicing and maintaining commercial plant rooms, heating setups, and mechanical systems. Licence: Full UK Driving Licence with no major endorsements. Location: Based in North East England (Newcastle, Sunderland, Durham, Middlesbrough, or surrounding areas). WHAT WE OFFER & BENEFITS Competitive Base Salary: Excellent basic hourly/annual rate reflecting your experience. Monthly Bonus Scheme: Extra earnings unlocked through monthly performance and operational bonuses. Healthcare & Wellbeing: Full Private Healthcare cover for peace of mind. Training & Upskilling: Fully funded ongoing training and additional certification courses for engineers looking to expand their skill sets (e.g., LPG, Catering, F-Gas, or Heat Pumps). Company Vehicle: Modern, fully equipped commercial van + fuel card for business travel. Tools & Gear: Specialist testing equipment, power tools, uniform, and full PPE provided. Career Growth: Clear pathways for career advancement as the company scales up its operational capacity across the North East. Apply online today or contact Astrid Camacho at Branta Recrtuitment for more information.

Randstad C&P are working with a leading facilities management company to onboard a Mobile Commercial Engineer. As a Commercial Gas Engineer, you will play a crucial role in the servicing, repair, PPM and reactive maintenance of commercial gas systems across various commercial sites in Edinburgh & surrounding areas. The Package: Competitive salary depending on experience up to 44,000 pa 40-hour workweek Monday to Friday, 8am - 4.30pm Company van and fuel card 34 days annual holidays (Inclusive of bank holidays) Ongoing training and professional development opportunities Generous company scheme Key Responsibilities: Conduct routine PPM, servicing and reactive maintenance on commercial gas systems. Diagnose and repair faults in gas systems and associated equipment. Ensure all work is carried out in compliance with relevant health and safety standards. Complete detailed reports and documentation of all maintenance and repair activities. Maintain excellent customer service and build strong relationships with clients. Travel to various sites across Edinburgh using the company-provided van. Qualifications and Experience: Core Safety: COCN1 Commercial Gas Qualifications: TPCP1A, ICPN1, CORT1, CIGA1 City & Guilds / NVQ Level 2/3 in Plumbing, HVAC, Electrical, or related engineering discipline Gas Safe Registered IPAF / PASMA certifications Full UK Driving Licence. Interested? Apply today with an up-to-date CV. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.