36 jobs found

Boiler Operator (Steam Boilers)Job Title: Boiler Operator / Steam Boiler Operator Working time: Monday- Friday, 8am-4pm Job Location: Greater London (currently split between AM in KCL building in SE5 9RX and PM in KCL building located near Guy's hospital, SE 1) Mechanical maintenance Engineer or Operator with ideally steam systems experience. The Boiler Operator is responsible for the safe, efficient, and reliable operation of steam boilers and associated equipment. The role includes monitoring boiler performance, maintaining correct steam pressure and water levels, carrying out routine inspections, identifying faults, and ensuring all equipment is operated in accordance with safety procedures and applicable regulations. Operate and monitor steam boilers, burners, feedwater systems, pumps, valves, and associated equipment. Start up and shut down boilers safely in accordance with approved operating procedures. Monitor steam pressure, temperature, water level, fuel supply, combustion conditions, and other operating parameters. Maintain the required steam pressure and supply to production or facility systems. Conduct routine boiler-room inspections and record operating readings in logbooks or electronic systems. Test boiler water and assist with water treatment to maintain required water-quality standards. Carry out boiler blowdown at specified intervals and according to operating procedures. Check safety devices, alarms, gauges, controls, valves, and interlocks for correct operation. Identify abnormal conditions, leaks, unusual noises, excessive vibration, pressure fluctuations, and other equipment problems. Report defects promptly and assist maintenance personnel with troubleshooting and repairs. Perform routine operator maintenance, cleaning, lubrication, and housekeeping activities. Respond appropriately to boiler alarms, trips, loss of water, pressure problems, and other emergencies. Isolate equipment safely before maintenance work and follow lockout/tagout or equivalent isolation procedures. Ensure the boiler house and surrounding work areas are kept clean, organised, and free from hazards. Follow company health, safety, environmental, and permit-to-work procedures. Support statutory inspections, servicing, testing, and certification of boilers and pressure systems. Carry out other related duties assigned by the supervisor. Qualifications and Experience: o BOAS preferable o City and Guild Boiler operator training preferable o Technical or vocational qualification in mechanical, electrical, boiler operations, or a related discipline is preferred. o Previous experience operating industrial steam boilers is preferred. o Good understanding of occupational health and safety requirements. o Ability to maintain accurate operational records. o Strong safety awareness o Mechanical aptitude o Good communication and teamwork Please see below brief introduction of the company: Equiax is a Mechanical Engineering and Welding company. Equiax was established in January 2007. We have 19 years of experience of working on NHS sites such as Guys' and St Thomas Hospital, Royal Free Hospital, King's College Hospital, Lewisham Hospital and fully appreciate the requirements and challenges these sites present. Our team consists of experienced mechanical engineers, fitters, Class 1 welders, project managers and integrated valued partners. We are Safe Contractor and Construction line accredited. Our mechanical engineering expertise and solutions include: Plantroom installations & maintenance (including full plantroom installs) Boiler house maintenance All pipework fabrication (onsite and off site): copper, carbon steel, stainless steel, etc Pipework & heat exchangers: heat exchange piping systems, PHEX, calorifiers supply and installation HVAC: AHU and chiller installations HTHW, MTHW and LTHW systems installations and repairs Motors and pumps installations and servicing Specialist works: Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

The RoleWe are seeking time-served Mechanical Pipe Fitters with NVQ Level 3 in Mechanical Engineering / Pipefitting / Installing Engineering Construction Plant & Systems for a new build EfW power station. This is a first fix and second fix mechanical install from ground up - not maintenance or shutdown work.You will be working on the full balance of plant (BoP) install.Systems You Will Be InstallingHigh Pressure / Medium Pressure / Low Pressure Steam pipeworkBoiler feedwater, condensate, steam drum pipeworkCooling water, raw water, demin water, effluentCompressed air, service air, instrument airLube oil, hydraulic oil pipeworkChemical dosing, ammonia, lime dosing (stainless / plastic)Flue gas treatment pipeworkPipework ranging from 15mm to 800mm NB - Sch10 to Sch160Key DutiesInstall pipework from P&ID's, isometric drawings, GA drawings and spool sheetsMeasuring, cutting, prepping, aligning, gasketing and bolt-up of flanged, screwed, Victaulic and butt-weld pipeworkFabricate pipe supports, brackets, hangers, spring supports, guidesWork directly with coded welders - fit-up, tacking, alignment, purge bungsInstallation of inline equipment: valves (gate, globe, butterfly, ball, control), strainers, steam traps, sight glasses, safety valves, pumps, skidsSetting to work activities: hydro-testing, pneumatic testing, flushing, steam blowing assistsCompleting quality documentation - weld maps, torque sheets, punch listsEssential Requirements - Must Have NVQ L3NVQ Level 3 Diploma in Mechanical Engineering / Pipefitting / Plating / Engineering Construction - Certificate must be available for JIB / CSCS verificationCSCS Blue Skilled Worker or Gold Advanced Craft Card (with NVQ L3 on reverse) OR CCNSG Safety Passport + JIB CardTime-served apprenticeship - indentures or proof of time served required on EfWMinimum 4 years experience as industrial pipe fitterProven new build heavy industrial experience: EfW / Power Station / CCGT / Biomass / Incinerator / Petrochem / RefineryAble to read and interpret complex isometrics and P&ID's - no assembly only fittersExperience working with high pressure steam systems essentialTickets & ComplianceCSCS / CCNSG Safety Passport (in date)NVQ L3 CertificateIPAF 3a/3b desirable (working from MEWP on pipe racks)Face Fit, Working at Height, Manual Handling (EfW inductions cover this)Must pass D&A test and 3-year background check (most EfW clients require it)Full 5-point PPE

Industrial / Commercial Pipe Fitter Plymouth Location: Plymouth & surrounding areas Salary: £45,000 £50,000 per year Job Type: Permanent Build Recruitment are currently looking for an experienced Industrial/Commercial Pipe Fitter to join a permanent team covering Plymouth and the surrounding areas. We re looking for someone with strong industrial or commercial pipe fitting/pipework experience . A Blue CSCS card is ideally required. Requirements: Proven industrial/commercial pipe fitting experience Experience working with pipework and mechanical installations Blue CSCS card ideally Full UK driving licence Able to work independently and as part of a team Salary: £45k £50k depending on experience. If you're interested, please get in touch with Myla at Build Recruitment on (phone number removed) .

We are currently recruiting for an experienced Mechanical Fitter with a background in water treatment and wastewater projects. The successful candidate will be responsible for the installation, maintenance and modification of mechanical equipment across water treatment sites. This is a hands-on position suited to a Mechanical Fitter who is comfortable working around pumps, valves, pipework and process equipment. Key Responsibilities Installation, maintenance and repair of mechanical equipment across water treatment sites. Installation and modification of mechanical pipework, pumps, valves and associated equipment. Mechanical assembly and fitting of process plant. Carrying out planned and reactive maintenance. Fault finding and diagnosing mechanical issues. Working from engineering drawings, specifications and site instructions. Supporting testing and commissioning activities. Carrying out mechanical upgrades and refurbishment works. Working alongside Mechanical Engineers, Electricians, Site Managers and other trades. Ensuring all work is completed safely and to the required quality standards. Completing relevant site documentation and reporting any issues or defects. Maintaining a clean, safe and organised working environment. Experience Required Proven experience as a Mechanical Fitter. Previous experience working within the water treatment, wastewater or utilities sector. Experience working with pumps, valves, pipework and mechanical process equipment. Ability to read and interpret mechanical drawings. Strong mechanical fitting and fault-finding skills. Experience with installation, maintenance and commissioning of mechanical equipment. Good understanding of site health and safety requirements. Ability to work independently and as part of a wider site team. Rate & Benefits 25 per hour 40-hour working week Overtime opportunities available Long-term project work Opportunity to work on major water infrastructure projects Supportive site team and professional working environment If you are an experienced Mechanical Fitter with water treatment experience and are available for contract work, please get in touch.

Site Supervisor (Rolling Stock) Leeds £47,000 + Benefits Permanent The Situation A leading rail engineering organisation is expanding its rolling stock upgrade capability and is seeking an experienced Installation Supervisor to support the delivery of a major fleet modernisation programme. This is a hands-on supervisory role, leading installation activities on the workshop floor and acting as the key link between technicians and management. You will be responsible for coordinating daily work, maintaining productivity, removing barriers to delivery, and ensuring installations are completed safely, efficiently, and to the required quality standards. The Opportunity This is an excellent opportunity for a Senior Technician, Lead Fitter, Working Supervisor, Team Leader, or experienced Rolling Stock Technician looking to step into or further develop their career in installation supervision. As the Installation Supervisor, you will take ownership of day-to-day workshop activities, lead a team of technicians through a major rolling stock upgrade programme, and play a critical role in delivering project milestones. The position offers the chance to develop leadership, planning, people management, and project coordination skills while gaining exposure to a high-profile rail modernisation project. Key Deliverables Within the first 12 months, you will be expected to: Coordinate installation activities across the project team. Ensure technicians have clear daily work allocations. Support achievement of project milestones and installation targets. Maintain quality and safety standards. Identify and communicate opportunities for efficiency improvements. Provide real-time feedback to the Production Manager on project progress and challenges. Key Responsibilities Allocate daily workloads to technicians. Coordinate activities across the workshop floor. Support installation and modification activities when required. Ensure work is completed in accordance with current drawings and instructions. Identify and escalate material shortages or technical issues. Provide frontline leadership and guidance to the installation team. Assist with risk assessments and safe systems of work. Support continuous improvement initiatives. Act as the communication link between technicians and management. Essential Skills and Competencies Essential Experience Fitter, Mechanical Fitter, Rolling Stock Technician, or similar engineering background. Experience working on installation, modification, or upgrade projects. Frontline supervisory, lead technician, or team leadership experience. Ability to coordinate and direct workshop activities. Desirable Experience Experience of rail vehicle installation or upgrade programmes. Rolling stock modification programmes. Lean manufacturing or continuous improvement exposure. Risk assessment and safe working practices knowledge. NVQ Level 3 Engineering or equivalent. Personal Attributes Hands-on leadership style. Organised and proactive. Strong communication skills. Practical problem solver. Team-focused approach. Safety conscious. Continuous improvement mindset. Location and Working Conditions Location: Leeds Hours: Monday to Friday, 07:00 to 15:30 This is a hands-on, workshop-based supervisory position with responsibility for leading installation teams and supporting delivery on the shop floor.

My client is a mechanical subcontractor, and we are now recruiting for a Pipe Fitters / Plumbers Mate to work on a commercial project in Cambridge. HOURLY RATE : £19.50 per hour - CIS LOCATION : Cambridge (CB4) DATE COMMENCING : Monday 5th October 2026 LENGTH OF CONTRACT : 2-3 months HOURS OF WORK : 7:30 - 16:30 Book 9 hours per day JOB DESCRIPTION : Pipe Fitters Mate, Plumbers Mate You will be assisting the Plumbers / Pipe Fitters on site. You must have previous 'Mate' experience. You also must have a good work ethic and work to a good standard, carry some tools, have a valid CSCS Card and PPE. REQUIREMENTS : Pipe Fitters Mate, Plumbers Mate CSCS / JIB Card Mates Card PPE CIS Tools UTR - to be paid CIS PERSON SPECIFICATION : Pipe Fitters Mate, Plumbers Mate Can communicate and work well with others already on site Can travel to site Can work the required hours each week Please Note : You will be paid via our payroll partner Quest Pay Solutions, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind - Construction Temps, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Ref: Tommy Smith, 18702 - Wallace Hind - Construction Temps

Options are looking for a mechanical mate. You don't need to be experienced for this role as training is provided but having a mechanical / pipefitting background would be an advantage. Salary- 30k + use of company vehicle + holidays The company will need you to work locally in there yard in Southampton but you must be happy to travel. They have a lot of work coming up on both installations and a lot of service work on both waste and aggregates sites. These will be based in around the South London area as well as Crawley and Woking. You may need to stay overnight near the sites for one or two night a week. As it is service type work on pumps, pipe systems and control equipment. You will be expected to initially assist mechanical engineers, plumbers and pipefitters. Interested? Please apply with your CV!

My client is a mechanical subcontractor, and we are now recruiting for a Pipe Fitters / Plumbers Mate to work on a commercial project in Cambridge. HOURLY RATE : £19.50 per hour - CIS LOCATION : Cambridge (CB4) DATE COMMENCING : Monday 5th October 2026 LENGTH OF CONTRACT : 2-3 months HOURS OF WORK : 7:30 - 16:30 Book 9 hours per day JOB DESCRIPTION : Pipe Fitters Mate, Plumbers Mate You will be assisting the Plumbers / Pipe Fitters on site. You must have previous 'Mate' experience. You also must have a good work ethic and work to a good standard, carry some tools, have a valid CSCS Card and PPE. REQUIREMENTS : Pipe Fitters Mate, Plumbers Mate CSCS / JIB Card Mates Card PPE CIS Tools UTR - to be paid CIS PERSON SPECIFICATION : Pipe Fitters Mate, Plumbers Mate Can communicate and work well with others already on site Can travel to site Can work the required hours each week Please Note : You will be paid via our payroll partner Quest Pay Solutions, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind - Construction Temps, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Ref: Tommy Smith, 18702 - Wallace Hind - Construction Temps

My client is a mechanical subcontractor, and we are now recruiting for a Pipe Fitters / Plumbers Mate to work on a commercial project in Cambridge. HOURLY RATE : £19.50 per hour - CIS LOCATION : Cambridge (CB4) DATE COMMENCING : Monday 5th October 2026 LENGTH OF CONTRACT : 2-3 months HOURS OF WORK : 7:30 - 16:30 Book 9 hours per day JOB DESCRIPTION : Pipe Fitters Mate, Plumbers Mate You will be assisting the Plumbers / Pipe Fitters on site. You must have previous 'Mate' experience. You also must have a good work ethic and work to a good standard, carry some tools, have a valid CSCS Card and PPE. REQUIREMENTS : Pipe Fitters Mate, Plumbers Mate CSCS / JIB Card Mates Card PPE CIS Tools UTR - to be paid CIS PERSON SPECIFICATION : Pipe Fitters Mate, Plumbers Mate Can communicate and work well with others already on site Can travel to site Can work the required hours each week Please Note : You will be paid via our payroll partner Quest Pay Solutions, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind - Construction Temps, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Ref: Tommy Smith, 18702 - Wallace Hind - Construction Temps

Mechanical Fitter - Dinorwig Location: Dinorwig, LL55 4TY Contract: Temporary Positions: 3 Start Date: ASAP Hours: 50 hours per week Working Pattern: 10 hours per day, Monday-Friday IR35: Outside IR35 Pay: 32.12- 36.65 per hour LTD / Umbrella The Role We are looking for two experienced Mechanical Fitters to join a major energy infrastructure project at Dinorwig. The successful candidates will work as part of a site team carrying out mechanical installation activities, reporting to the Site Supervisor or Chargehand. Previous substation experience is essential, along with the relevant site tickets and National Grid experience. Key Responsibilities: Carry out mechanical installation activities as directed by the Site Supervisor or Chargehand. Work in accordance with site QEHS procedures, site rules and project requirements. Complete allocated task cards within the required timescales. Work to the standards and timescales set by the Work Party Leader. Identify and highlight potential issues or delays in advance. Follow all Health & Safety, Environmental and Quality requirements. Assist with project documentation where required. Work effectively both as part of a team and independently. Maintain a high standard of workmanship throughout the project. Carry out other duties within your competence as directed by site management. Requirements: Apprentice trained, with City & Guilds or minimum NVQ Level 3 in an appropriate discipline, plus at least 1 year's relevant experience. Alternatively, industry-recognised training with a minimum of 2 years' experience working as part of a team on an Electricity Supply Industry construction site or similar environment. Previous substation experience is essential. Experience within power generation, oil & gas, utilities or general construction environments is beneficial. Good understanding of Health & Safety, Quality and Environmental requirements. Able to work effectively within a team and independently when required. Qualifications: CSCS or CCNSG Safety Passport. Mechanical related quaification National Grid Person ticket is essential. Pay Rates: LTD / Umbrella: First 37 hours: 32.12 per hour After 37 hours / first 4 hours Saturday: 33.87 per hour After 4 hours Saturday / Sunday / Bank Holiday: 36.65 per hour To apply, please send your CV along with details of your electrical qualifications and current tickets. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Job Title: Mechanical Fitter - National Grid Person ESSENTIAL Location: Elstree, WD25 8DT Start Date: 05/10/2026 Duration: Until 30/07/2027 Hours: 50 Hours Per Week (10 Hours Per Day) Contract Type: Contract IR35 Status: Outside IR35 Positions Available: 1 Rates: LTD / Umbrella (Outside IR35) 29.12/hour - First 37 Hours 30.87/hour - After 37 Hours / First 4 Hours Saturday 33.65/hour - After 4 Hours Saturday / Sunday / Bank Holidays We are currently seeking an experienced Mechanical Fitter for a long-term contract opportunity with al leading Tier 1 on a major energy infrastructure project based in Elstree. This is an excellent opportunity for a mechanically qualified fitter with GIS experience and a background in HV substations, power generation, oil & gas, or heavy industrial environments to join a high-profile project. Please Note: Candidates must have GIS experience, a valid CSCS card, National Grid Persons, and Slinger / Signaller certification. A Welder ticket would be highly advantageous. The Role: You will be working as part of the our clients site team, supporting mechanical installation activities on a major substation project. Reporting directly to the Site Supervisor / Chargehand, you will play a key role in ensuring works are delivered safely, efficiently, and to the highest quality standards. Key Responsibilities: Carry out mechanical installation and fitting activities as directed by site management Work in line with all QEHS procedures and site safety requirements Support site supervisors and chargehands with day-to-day installation activities Complete allocated task cards within required project timescales Highlight any delays, issues, or risks proactively Maintain full compliance with health & safety, environmental, and quality standards Assist with site documentation where required Ensure accurate and timely submission of timesheets and associated paperwork Work safely at all times, maintaining a duty of care for yourself and others on site Requirements: NG Person Telehandler License Apprentice trained OR NVQ Level 3 / City & Guilds in a relevant mechanical discipline Minimum 1-2 years' experience within electricity supply industry construction or similar environments Proven GIS mechanical fitting experience Experiece working on HV Substations, Power Generation, Oil & Gas Heavy Industrial Construction Valid CSCS Card or CCNSG Safety Passport Personal Attributes: Strong interpersonal and communication skills Proactive and positive attitude Team-focused mindset Problem-solving mentality Ability to work independently when required Strong commitment to site safety and quality standards If you're an experienced Mechanical Fitter with GIS experience and the required National Grid authorisations, we'd be keen to hear from you immediately. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

horterm Group are looking for Mechanical Fitters at Heathrow Airport. Location: Heathrow Airport Hours: Vary from 40 hours to 50 hours dependant upon job Duties: Mechanical fitting, automation, installation. Security Clearance: 5 year work history and criminal record check. Tickets: CSCS card, IPAF Pay Rates: Vary depending on work, PAYE and CIS available no LTD If you are interested, please call Natalie on (phone number removed)

VGC Group are currently recruiting for a Mechanical Fitter to join our team on a major project in Leiston, Suffolk. We are looking for an experienced and reliable Mechanical Fitter to inspect, maintain, and repair a wide range of heavy plant machinery. The ideal candidate will have strong diagnostic skills, hands-on technical experience, and the ability to work autonomously or as part of a maintenance team. This role ensures machinery remains safe, compliant, and fully operational to support production and site efficiency. Basic pay rate: £24.14 per hour PAYE Shift- 12 days on, 2 days off. 12 hour days Start Date: ASAP, subject to gaining vetting Lodge pay is available for the successful candidate, if they meet the criteria. Qualifications/experience: Essential - CSCS or JIB Tickets - NVQ Level 3 Mechanical Fitter - LOTO - Strong diagnostic skills, hands-on technical experience, and the ability to work autonomously or as part of a maintenance team - Ensure machinery remains safe, compliant, and fully operational to support production and site efficiency. - Proven experience as a Heavy Plant Mechanic / Plant Fitter / Mobile Plant Technician - Strong knowledge of diesel engines, hydraulic systems, and mechanical components - NVQ Level 3 in Plant Maintenance, Mechanical Engineering, or equivalent qualification - Ability to read technical manuals and engineering diagrams - Experience with diagnostics tools and software - Full UK driving licence Key Responsibilities: - Carry out routine servicing, maintenance, and repairs on heavy plant machinery - Diagnose and troubleshoot mechanical, electrical, hydraulic, and pneumatic faults - Conduct preventative maintenance inspections and complete associated documentation - Respond to breakdowns with efficient fault-finding and repair work - Perform component replacements such as engines, transmissions, pumps, cylinders, pins, bushes and tracks - Ensure all work is performed in line with manufacturer guidelines and company safety procedures - Maintain accurate service records, job sheets, and inspection reports - Support continuous improvement of maintenance processes - Operate plant equipment for testing purposes (as qualified) - Communicate effectively with supervisors, operators, and site management - Maintain a clean, organised, and safe working environment Key Skills: - Strong problem-solving and diagnostic ability - Ability to work under pressure and manage workload effectively - Good communication and teamwork skills - High level of attention to detail - Competent with IT for job reporting and diagnostics - Ability to work independently with minimal supervision If you are interested in this position, please apply with an up to date CV or contact the following: Madeleine Shipley - (phone number removed) / (phone number removed) Kayleigh Keeling - (phone number removed) / (phone number removed) VGC Group is a leading labour supply provider, partnering with major contractors on major infrastructure and construction projects across the UK. We are committed to equality, diversity, and inclusion, and we support and develop our workforce throughout their careers. INDEN

Position: Mechanical Fitter Location: Stirling, Scotland Start date: Monday 28th September Duration: 9 days Hours: 10 hours per day, Monday-Friday, plus overtime and weekends PAYE Pay Rates: Mon-Fri, First 10 Hrs per day: 24.00/hr Over 10 Hrs per day & Weekends: 30.00/hr Accommodation: Provided The Role: Integrate Engineering Resources is recruiting Mechanical Fitters for industrial conveyor and materials handling work. The role will focus on gearboxes, chain drives, associated mechanical equipment and modifications to pack lifters . Duties: Remove, install, maintain and repair gearboxes and drive assemblies. Work on conveyor chains, sprockets, shafts, bearings and couplings. Carry out mechanical strip-downs, component replacement and reassembly. Carry out modifications to pack lifters. Check chain tension, drive alignment and equipment condition. Identify faults and support testing before equipment is returned to service. Work safely with the site team and follow isolation and permit procedures. Requirements: Proven experience as a Mechanical Fitter. Hands-on experience with gearboxes and chain drive systems. Experience maintaining or installing conveyors or other materials handling equipment. Ability to work from mechanical drawings and use fitting and alignment tools. Relevant mechanical qualification or apprenticeship is preferred. CSCS/CCNSG. Experience in power generation, EfW, biomass, recycling, quarrying or heavy manufacturing would be useful. About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction & Maintenance sectors. Our specialist recruitment activities range across all areas and include the appointment of all levels of professional into the Water Treatment, Heavy Industrial, Combined Cycle Gas Turbine, Nuclear, Biomass, Energy from Waste and Wind industries throughout the UK and worldwide.

Job Advertisement: Fitter / Tool Repair Technician Location: Staines Salary: 29,000 - 32,000 (depending on experience) hourly pay while temping Contract Type: Temp to Perm Working Pattern: Full Time Our client, a leading specialist hire business serving the construction, industrial sectors, is seeking an experienced and motivated Fitter / Tool Repair Technician to join their dynamic depot team. This is an exciting opportunity for individuals with a strong mechanical aptitude and previous tool repair experience who thrive in a fast-paced environment. The Role: As a Fitter / Tool Repair Technician, you will play a vital role in ensuring that a wide range of hire equipment and power tools are maintained to the highest standards. Your expertise will be essential in diagnosing faults, performing repairs, and ensuring that customers receive reliable and fully tested products. Key Responsibilities: Inspect, test, and assess returned equipment to identify any faults or maintenance needs. Perform fault finding, servicing, and repairs on various tools and equipment. Prepare equipment meticulously for the next hire, ensuring it meets all safety standards. Ensure compliance with relevant safety standards and manufacturer specifications. Complete service and repair documentation with accuracy. Maintain a clean, organised, and safe workshop environment. Support stock control of spare parts and consumables. Collaborate with depot colleagues to guarantee excellent customer service and equipment availability. Identify equipment that requires specialist repairs or replacement. Candidate Requirements: Essential: Previous experience in repairing, servicing, or maintaining tools and hire equipment. Strong mechanical and fault-finding skills. Experience in testing equipment and preparing it for customer use. Good understanding of health and safety procedures. Ability to work independently and manage workload effectively. Strong attention to detail and a commitment to quality. Desirable: Experience within the tool hire, plant hire, equipment hire, or construction sector. Electrical testing experience (PAT Testing or similar). Knowledge of power tools, hydraulic equipment, generators, pumps, or related plant equipment. Relevant mechanical or engineering qualifications. What's On Offer: A competitive salary ranging from 29,000 to 32,000 based on experience. Ongoing training and development opportunities to enhance your skills. Clear career progression paths within a supportive and professional working environment. If you are an enthusiastic professional with a knack for tool repair and maintenance, this is the perfect opportunity to make a significant impact in a thriving organisation. Don't miss out on the chance to join a team that values excellence and teamwork! To apply, please submit your CV Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

PLANT & TOOL FITTER Location: Ascot Salary: 36,200 per annum (o/t available) Job Type: Permanent Hours: Monday-Friday We are currently recruiting for an experienced Plant & Tool Fitter to join an established plant and tool hire business. This is a varied, hands-on position working within a busy workshop and plant hire environment, with responsibility for the servicing, maintenance, testing and repair of plant and small tools, as well as attending customer sites when required. The successful candidate will ideally have previous experience within plant hire, tool hire, plant engineering, mechanical fitting or a similar environment and will be confident diagnosing and resolving faults across a range of equipment. Key Responsibilities - Test, maintain, service and repair a range of plant and hand tools - Carry out repairs and maintenance at customer sites when required - Diagnose faults and carry out effective repairs - Clean, inspect and prepare returned hire equipment - Maintain workshop tools, test equipment and ancillary equipment - Carry out bodywork repairs and painting to maintain the appearance of the hire fleet - Update fleet numbers and equipment identification as required - Assist customers with loading and unloading equipment - Deliver or collect equipment when required - Assist drivers with loading and unloading vehicles - Liaise with office staff regarding equipment required for future bookings - Communicate effectively with customers, suppliers and colleagues - Assist other depots or teams when required - Keep the workshop and plant yard clean, safe and organised - Ensure equipment and external storage areas are secured at the end of each day - Work in accordance with company procedures, ISO requirements and health & safety standards - Attend relevant training courses to develop product and technical knowledge - Carry out other reasonable duties as required by management About You The ideal candidate will have: - Previous experience as a Plant Fitter, Plant Engineer, Tool Fitter, Mechanical Fitter or similar - Experience working with plant, construction equipment and/or small power tools - A good understanding of mechanical fault finding, servicing and repairs - A full UK driving licence - Good geographical knowledge of the local area - Good IT/computer skills - Excellent communication and interpersonal skills - A practical and analytical approach to problem solving - The ability to learn about new products and equipment - A strong commitment to health & safety and following established procedures - A customer-focused approach - The ability to work effectively as part of a team, while also being comfortable working independently - A flexible approach to overtime and additional tasks when required - A fit and active approach to a hands-on role What's on Offer - 35,000 salary - Permanent position - Monday-Friday working - Varied workshop and field-based work - Opportunity to work with a wide range of plant and tools - Established and busy plant hire environment If you have a background in plant hire, tool hire, plant engineering, mechanical fitting or equipment maintenance and are looking for your next permanent opportunity, we'd be keen to hear from you. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corporate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Friendly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.

Artisan Recruitment are looking for Plumber or Pipefiiters on a perm basis for one of there established clients. Established in 2007, our client began as a mechanical HVAC company with a clear mission: to deliver high-quality, reliable mechanical installations across the South of England. Over the years, the business has grown into a first-choice contractor and trusted partner, particularly within the healthcare sector , while continuing to expand its expertise and client base across a range of commercial industries. Due to continued growth, they are now looking to recruit experienced Plumbers and Pipefitters to join their permanent team and work on a variety of commercial projects across Bracknell, Berkshire and London . The Role. As a Plumber / Pipefitter , you will be responsible for carrying out high-quality mechanical installation works across commercial projects. You will work as part of an experienced site team, delivering installations to a high standard while maintaining a strong focus on safety, quality and reliability. Projects may include healthcare, commercial, public-sector and other specialist buildings , providing a varied workload and opportunities to develop your experience across different environments. Key Responsibilities Installation of commercial plumbing and mechanical pipework systems Installation of hot and cold water services Installation of heating and chilled water pipework Working with copper, steel, stainless steel and other pipework systems Reading and working from technical drawings, schematics and specifications Measuring, cutting, fitting and installing pipework accurately Carrying out pressure testing and associated commissioning activities Working alongside mechanical engineers, supervisors and other site trades Maintaining high standards of workmanship throughout each project Ensuring all works are completed in accordance with relevant regulations, specifications and health & safety requirements Keeping work areas clean, safe and organised Reporting any issues or potential problems to the Site Supervisor or Project Manager Working professionally and positively with clients, colleagues and other contractors on site

Mechanical Fitter Heathrow Airport £25.00 per hour (Uplifts for Night & weekends) Ongoing Days, Nights, Weekends The Company MJM is currently recruiting experienced Mechanical Fitters to work at Heathrow Airport on a long-term basis. You'll be part of a skilled team responsible for maintaining the mechanical integrity of Heathrow's critical infrastructure-keeping systems running efficiently in one of the world's busiest airports. The ideal candidate will have experience of installing or maintaining conveyor systems or have worked in a similar environment on industrial sized equipment. The Role As a Mechanical / Maintenance Fitter based at Heathrow, you will be responsible for the installation, maintenance, and repair of conveyor systems, ensuring they operate safely, efficiently, and with minimal downtime. Your duties will include: Installing, assembling, and commissioning conveyor systems and associated mechanical equipment Carrying out planned preventative maintenance, inspections, and servicing on conveyor systems Diagnosing mechanical faults and carrying out reactive repairs to minimise operational disruption Replacing and repairing conveyor components, including rollers, bearings, belts, motors, and gearboxes Working from engineering drawings and following safe working practices during installation and maintenance activities Collaborating with colleagues and site teams to ensure projects are completed on time and conveyor systems remain fully operational About You Proven experience installing and maintaining industrial-sized systems (airport, logistics, or manufacturing environments) Recognised mechanical qualification - City & Guilds or NVQ Level 3 (or higher) Valid CSCS Card - essential Flexible to work a mixture of days, nights, and weekends, depending on scope of works. Strong fault-finding skills and a proactive, safety-first mindset Desirable Experience It would be advantageous if you also have: Experience in a similar setting, manufacturing, industrial, or automated environment A 5-year checkable work history, required for Airside pass clearance Apply Now If this sounds like the right opportunity for you, apply today to join a well-established team working in a critical Heathrow environment.

Engineering Skills Coach Mechanical / Manufacturing Wakefield £38,000 £42,000 Permanent 36 hours Home-based with regional travel Suitable backgrounds: Mechanical Maintenance Engineer Mechanical Engineer CNC Machinist Manufacturing Engineer Maintenance Technician Mechanical Fitter Mechatronics Engineer Multi-Skilled Engineer Engineering Trainer Engineering Tutor Engineering Assessor Skills Coach Are you an experienced engineer looking to move into training, or an existing trainer/assessor looking for a coaching-focused role? We re working with a leading engineering training organisation looking for an Engineering Skills Coach covering Wakefield and the surrounding area. No previous teaching or assessing experience is required. Industry candidates are encouraged to apply, with support provided to gain the relevant assessor qualification. The role: Manage a caseload of around engineering apprentices Coach across MOET, Engineering Fitting, Mechatronics and Mechanical Maintenance standards Support portfolio building and evidence gathering Carry out learner progress reviews and workplace assessments Prepare apprentices for End Point Assessment Work closely with employers and manage your own diary What we re looking for: Mechanical maintenance / engineering Machining / CNC Engineering fitting Mechatronics Manufacturing engineering Engineering training or assessing Package: £38,000 £42,000 36-hour week, Monday to Friday Home-based contract Typically 2 3 days per week visiting apprentices/employers 55p per mile, paid door-to-door Travel generally within miles of Wakefield A strong opportunity to come off the tools without leaving engineering behind, using your industry experience to develop the next generation of engineers.

Engineering Skills Coach Mechanical / Manufacturing Coventry £38,000 £42,000 Permanent 36 hours Home-based with regional travel Suitable backgrounds: Mechanical Maintenance Engineer Mechanical Engineer CNC Machinist Manufacturing Engineer Maintenance Technician Mechanical Fitter Mechatronics Engineer Multi-Skilled Engineer Engineering Trainer Engineering Tutor Engineering Assessor Skills Coach Are you an experienced engineer looking to move into training, or an existing trainer/assessor looking for a coaching-focused role? We re working with a leading engineering training organisation looking for an Engineering Skills Coach covering Coventry and the surrounding area. No previous teaching or assessing experience is required. Industry candidates are encouraged to apply, with support provided to gain the relevant assessor qualification. The role: Manage a caseload of around engineering apprentices Coach across MOET, Engineering Fitting, Mechatronics and Mechanical Maintenance standards Support portfolio building and evidence gathering Carry out learner progress reviews and workplace assessments Prepare apprentices for End Point Assessment Work closely with employers and manage your own diary What we re looking for: Mechanical maintenance / engineering Machining / CNC Engineering fitting Mechatronics Manufacturing engineering Engineering training or assessing Package: £38,000 £42,000 36-hour week, Monday to Friday Home-based contract Typically 2 3 days per week visiting apprentices/employers 55p per mile, paid door-to-door Travel generally within miles of Coventry A strong opportunity to come off the tools without leaving engineering behind, using your industry experience to develop the next generation of engineers.