Bricklayers are skilled construction professionals who build, repair and maintain walls, structures and other masonry elements using bricks, blocks and mortar. Their work can range from new-build housing and commercial buildings to restoration, refurbishment and specialist brickwork.
In simple terms, a bricklayer turns construction drawings and specifications into accurately built masonry structures. The work requires practical skill, careful measurement, knowledge of materials and the ability to maintain consistent quality throughout a project.
Bricklayers work closely with other construction trades, including groundworkers, carpenters, roofers, electricians, plumbers and site supervisors.
A bricklayer constructs and repairs structures using bricks, blocks and other masonry materials.
Typical responsibilities include:
The National Careers Service identifies reading building plans, measuring work areas, setting out bricks and blocks, mixing mortar, laying bricks, cutting materials and checking alignment among the day-to-day tasks of bricklayers.
Bricklayers can work across a wide range of construction projects.
Housebuilding is one of the most familiar environments for bricklayers.
Work can include:
Bricklayers may also work on:
The type of masonry and construction method depends on the building design.
Existing buildings may require repairs, replacement brickwork or alterations.
Bricklayers may remove damaged sections and construct replacement masonry while matching existing materials and patterns.
Specialist bricklayers can work on historic buildings and conservation projects.
This can require knowledge of traditional materials, older construction methods and specialist repair techniques.
The National Careers Service specifically identifies heritage and restoration work as an area in which bricklayers can specialise.
Bricklaying involves several stages.
Before work starts, bricklayers need to understand relevant drawings and instructions.
Drawings can show:
Understanding drawings helps ensure masonry is built in the correct location and configuration.
Setting out establishes where brickwork should begin.
A bricklayer may measure the work area and mark positions for walls, corners, openings and other features.
Accuracy at this stage is important because errors can affect subsequent construction work.
Mortar is used to bond masonry units together.
Bricklayers may use ready-mixed mortar or prepare mortar according to the requirements of the project.
The correct mix and consistency can depend on the type of construction and specification.
The main task involves applying mortar and positioning bricks or blocks accurately.
Bricklayers need to maintain:
The work is repeated across courses to create the required wall or structure.
Bricklayers use tools such as spirit levels, lines and other measuring equipment to maintain accuracy.
Modern construction sites may also use laser levels and other equipment.
The National Careers Service identifies spirit levels, laser levels and plumb lines among the equipment used to check brickwork.
Bricks are not the only material used by modern bricklayers.
Depending on the project, they may work with:
The material selected depends on the building design, structural requirements, appearance and project specification.
A skilled bricklayer needs to understand different masonry techniques.
Brick bonds determine how bricks are arranged within a wall.
Different patterns may be selected for structural, functional or visual reasons.
Examples include:
The appropriate bond depends on the construction requirements.
Corners need to be accurately constructed because they establish the alignment of adjoining walls.
Bricklayers need to maintain correct levels, dimensions and angles while building corners.
Brickwork may need to incorporate openings for:
These areas require careful coordination with other parts of the building.
Repointing involves removing deteriorated mortar from joints and replacing it with new mortar.
It is commonly associated with repair and maintenance work.
Experienced bricklayers can also create decorative features using specialist patterns, shapes and masonry details.
Bricklaying is a practical trade requiring both physical and technical skills.
Small errors can become more significant as a wall increases in size.
Bricklayers therefore need to maintain accurate measurements and alignment.
Bricklaying requires controlled use of tools and materials.
Good hand coordination is important when applying mortar, positioning bricks and finishing joints.
Bricklayers need to understand construction methods, materials and drawings.
The work can involve standing, lifting, bending and working outdoors for extended periods.
Consistent joints, levels and finishes are important to the quality of completed brickwork.
Bricklayers commonly work alongside other trades and site management teams.
The National Careers Service lists construction knowledge, attention to detail, teamwork, organisation, concentration and practical hand skills among the capabilities required for bricklayers.
There are several routes into bricklaying.
The National Careers Service identifies:
as routes into the occupation.
Courses can include construction skills, bricklaying and relevant construction T Levels.
Apprenticeship routes include Level 2 and Level 3 bricklaying pathways.
Another route is to start as a construction site labourer or hod carrier and develop bricklaying skills through workplace training.
Bricklayers working on UK construction sites generally need the appropriate CSCS card or an accepted equivalent where the site requires it.
The specific card depends on the worker's qualification, occupation and level of responsibility.
The National Careers Service states that a CSCS card or equivalent is needed to train and work on a construction site for the bricklayer occupation.
Candidates should check the current CSCS requirements for their particular role before applying for a card.
The terms can overlap, but they can also describe different areas of masonry work.
A bricklayer generally specialises in constructing brick and block structures.
A mason may work more broadly with masonry materials, including natural stone.
Some experienced tradespeople develop skills across both brickwork and specialist masonry.
Yes.
With experience, bricklayers can develop specialist skills in areas such as:
Specialist skills can be particularly relevant to refurbishment, conservation and technically demanding projects.
Bricklayers can work both indoors and outdoors.
Construction work may involve exposure to:
Protective equipment and site-specific safety procedures may be required.
The National Careers Service describes bricklaying as physically demanding work that can take place outdoors in different weather conditions and sometimes at height.
Yes.
Experienced bricklayers can work as self-employed contractors depending on their skills, experience, business arrangements and the requirements of individual projects.
Self-employed bricklayers may work directly for contractors or through subcontracting arrangements.
They need to understand their responsibilities regarding tax, insurance, documentation and any site-specific requirements.
Bricklaying can provide several progression routes.
A possible pathway is:
Trainee Bricklayer → Bricklayer → Experienced Bricklayer → Bricklaying Supervisor → Site Management
Other routes can include:
The National Careers Service specifically identifies progression to bricklaying team supervisor, construction estimator and site inspector, as well as specialisation in heritage brickwork or stonemasonry.
A bricklayer's CV should show practical experience rather than simply stating the job title.
Useful information includes:
For example, instead of writing:
Bricklayer – 5 years' experience
a CV could describe specific responsibilities:
Bricklayer – Residential New Build
This gives employers more useful information when assessing practical experience.
Bricklayers contribute directly to the physical construction and repair of buildings.
Their work can involve structural masonry, external walls, partitions, repairs, restoration and architectural details.
Although construction methods continue to develop, skilled masonry remains an important part of residential, commercial, refurbishment and heritage construction.
The role also provides a pathway from practical trade work into specialist masonry, supervision and wider construction careers.
A bricklayer builds, repairs and maintains walls and other masonry structures using bricks, blocks, mortar and related materials.
Possible routes include a college bricklaying course, apprenticeship or workplace training. Relevant qualifications can help demonstrate occupational competence.
A CSCS card or accepted equivalent is generally required where a construction site requires certification. The appropriate card depends on the worker's occupation and qualifications.
Yes. Experienced bricklayers can specialise in heritage brickwork, restoration, repointing and other conservation-related masonry work.
Yes. Experienced bricklayers can progress into supervisory roles and, with additional experience and qualifications, potentially move into wider construction management.