559 jobs found

Lead Maintenance Engineer Location: Central London Salary: 48,000 - 50,000 per annum + Excellent Overtime Hours: Monday - Friday, 40 hours per week Role: Static, high end commercial site The Role: As the sole engineer on site, you will be the go-to technical expert for all building services maintenance. This is a hands-on position, with approximately 80% of your time spent on the tools, ensuring the site runs smoothly and efficiently. Key Responsibilities: Carrying out all planned preventative maintenance (PPM) and reactive repairs across the site in line with SLAs. Performing electrical fault-finding and repairs on single and three-phase systems, distribution boards, control panels, and circuits. Conducting routine electrical maintenance, including emergency light testing, statutory checks, and replacements of lamps, ballasts, and other components. Managing and troubleshooting the building's power and lighting systems, and undertaking minor electrical installations such as replacing sockets, switches, and fused spurs. Providing expert fault-finding, diagnostics, and repair on a wide range of HVAC plant, including Air Handling Units (AHUs), Fan Coil Units (FCUs), VRV/VRF systems, splits, and ventilation. Managing general electrical and mechanical plant, including pumps, motors, and basic lighting and power systems. Undertaking minor fabric and plumbing repairs as required. Overseeing and managing specialist sub-contractors for services such as lifts and fire safety systems. Ensuring all work is completed to the highest standard and all site documentation is kept up to date. Essential Requirements: Proven experience in a commercial building services maintenance role. An electrical or mechanical engineering qualification (e.g., City & Guilds Level 3, 18th Edition, ) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Project Engineer - Worcestershire Office Salary: 40,000- 45,000 (experience dependent) We are looking for a hands-on Project Engineer to manage the engineering process on bespoke structural steel projects . The Role: Take ownership of the project engineering process from design through to site delivery Coordinate design, detailing, fabrication, and installation Review drawings and models (Tekla experience essential) Resolve technical issues to keep projects on track International travel, including visits to China You: Current Project Engineer, Assistant Engineer, or Project Coordinator Experience in structural steel projects Strong Tekla knowledge or understanding essential Organised, proactive, and capable of working across multiple stakeholders In Return: Work on large-scale and bespoke structural steel projects Career progression towards a Project Manager role Opportunity for international travel Based in Worcestershire with potential flexible working Apply today to be a part of this exciting opportunity and Sabrina O'Donnell from The Highfield Company will be in touch

Role: Assistant Project Manager / Project Engineer Location: Worcester Salary: Up to 45,000 Role Overview We are seeking a Project Engineer to support the technical delivery of structural steel projects from design through fabrication and installation. The role is focused on engineering coordination, technical problem-solving, and project support , ensuring designs are buildable, compliant, and delivered efficiently. While this is not a pure detailing role, a background in Tekla Structures is essential to enable effective coordination with detailing teams, review models and drawings, and resolve technical issues throughout the project lifecycle. This role would suit someone who has progressed from a steel detailing or draughting background into a broader project engineering position. Key Responsibilities Project Engineering & Technical Coordination Act as a key technical link between design, detailing, fabrication, and site teams. Review engineering information, drawings, and models to ensure accuracy and buildability. Manage RFIs, technical queries, and design clarifications through to resolution. Support construction sequencing and method development from a technical perspective. Assist Project Managers with technical input during planning and delivery stages. Engineering & Quality Support Ensure engineering solutions align with project specifications and standards. Support quality inspections, snagging, and technical close-out activities. Contribute to risk reduction by identifying technical issues early. Tekla / Technical Review (Supportive, Not Primary) Use Tekla knowledge to review and interrogate models and drawings , not solely to produce them. Coordinate with detailing teams to ensure models reflect engineering intent and site requirements. Identify clashes, detailing issues, and buildability risks within Tekla outputs. Collaboration & Communication Attend design meetings, coordination workshops, and site meetings as required. Communicate clearly with internal teams, subcontractors, and external stakeholders. Provide technical guidance where needed to support smooth project delivery. Candidate Profile Essential Experience working as a Project Engineer , Assistant Engineer, or similar technical coordination role. Strong background in structural steel projects . Previous hands-on experience with Tekla Structures (from a detailing/draughting or BIM background). Ability to review and understand Tekla models and fabrication drawings. Strong understanding of buildability, fabrication, and site constraints. Confident communicator with strong problem-solving skills. Why This Role This role plays a critical part in ensuring engineering information is technically sound, coordinated, and buildable , helping projects run smoothly from early design through to site delivery. It offers a clear path for progression into Senior Project Engineer or Project Management roles. For more information please get in touch with our structural steel specialist Sharon O'Donnell

Are you an experienced MEP Revit Technician looking to step into a senior role?Do you thrive in a collaborative environment where digital design and coordination are at the heart of project delivery? We are recruiting for a Senior MEP BIM Technician to join a growing Manchester team working across a wide range of building services projects. If you have strong UK project experience and a passion for high-quality, fully coordinated models, this opportunity is ideal for you. The Role As a Senior MEP BIM Technician, you'll play a key role in delivering coordinated 3D MEP models and technical drawing packages for building services projects across commercial, residential, healthcare, education and industrial sectors.You will work closely with Mechanical, Electrical and Public Health engineers, taking the lead on BIM delivery, producing detailed Revit models and ensuring all information is accurate, coordinated and construction-ready.Responsibilities Producing detailed MEP Revit models for services including ductwork, pipework, containment and plantrooms Supporting BIM coordination across multidisciplinary design teams Running clash detection using Navisworks and helping resolve issues Preparing high-quality technical drawings, layouts and schedules Maintaining models and documentation to UK BIM standards (including ISO 19650) Mentoring junior BIM and Revit Technicians Working collaboratively with engineers, project managers and external consultants Ensuring drawings and models align with UK regulations, industry standards and project requirements What We're Looking For Essential: Minimum 4-5 years' MEP Revit experience within the UK (commercial, residential or healthcare projects) Strong working knowledge of Revit MEP and Navisworks Experience coordinating MEP models within a BIM workflow Ability to produce accurate installation-level drawings Familiarity with UK building regulations and construction methodology Comfortable working in common data environments (e.g. BIM 360, Viewpoint, Aconex) Excellent communication skills and ability to collaborate with engineers and clients A proactive approach and pride in producing quality work Desirable: Experience mentoring junior technicians Exposure to ISO 19650 processes Experience with prefabrication or plantroom modelling What's On Offer Competitive salary based on experience Clear progression into senior and lead BIM roles Ongoing training and professional development Involvement in exciting, high-profile UK projects Supportive, friendly and collaborative team environment How to Apply If you're an experienced MEP Revit Technician looking to take the next step into a senior BIM-focused position, we'd love to hear from you.Send your CV or reach out for a confidential discussion directly to myself at Alternatively:If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

An excellent opportunity for an experienced Commercial Maintenance Plumber in Bristol. This is a Monday to Friday position working a 40 hours per week, In return you will receive: Salary - 35k Static, Bristol Monday to Friday, 40 hours 25+8 days holidays No call outs Overtime Other details: Requirements / Qualifications: Qualifications: NVQ Level 2 / 3 in plumbing / equivalent Day to Dat Duties: Install, repair, and maintain plumbing systems. Detect and fix leaks. Perform routine and emergency maintenance. Ensure compliance with codes and standards. Conduct system inspections. Provide customer service and maintain records. Fabric Engineer Duties: Perform maintenance on building fabric (walls, floors, ceilings, etc.). Conduct minor repairs and decorative work. Inspect building fabric for damage. Ensure health and safety compliance. Coordinate with maintenance staff and contractors. Maintain documentation and interact with building occupants. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

General Maintenance Engineer (QSR Sector) £15 per hour min of 40-45 hours a week (More available) UK-Wide Travel England and Wales - Ideally Bristol-Based Van & Tools Provided We are looking for a reliable and practical General Maintenance Engineer to support a growing portfolio of Quick Service Restaurant (QSR) and fitness brands across the UK. You'll be carrying out planned and reactive maintenance across well-known sites including Taco Bell, Subway, Starbucks and Jetts Gyms, ensuring facilities remain safe, compliant and fully operational. Key Responsibilities Carry out general building maintenance and repairs across multiple sites Planned and reactive maintenance within QSR and gym environments Basic electrical, plumbing, carpentry and fabric maintenance Fault finding and first-time fixes where possible Liaising professionally with site managers and clients Accurately completing job reports and compliance paperwork Ensuring all work is completed safely and to a high standard About You Proven experience in a general maintenance / facilities / multi-skilled role Comfortable working in fast-paced commercial environments Refrigeration experience desirable but not essential Able to travel nationwide with occasional overnight stays Self-motivated, organised and able to work independently Strong problem-solving skills and attention to detail Full UK driving licence essential What's on Offer Company van provided (business use) Tools and equipment supplied Competitive salary (dependent on experience) Overtime opportunities Long-term, stable work with nationally recognised brands Supportive management and clear workload planning Location Ideally Bristol-based, however the role involves nationwide travel covering sites across the UK.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.