124 jobs found

Design Manager required to work for Principal Contractor JV on High Speed Rail Major Tunnels Programme. Contract initially up to end of Oct 2026 - Inside IR35 Old Oak Common/North Acton - Hybrid Working Arrangements Skillset: Design Management, Fitout, Engineering, Construction. Role Brief: This Design Manager will manage the Stage 5 asset design and be responsible for leading and coordinating all design and disciplines associated with a particular asset, facilitate the delivery of the designs, ensuring the design is technically assured, delivered to programme and coordinated between design disciplines. Candidates for the role must have a proven experience of large-scale civil engineering projects. Your previous/background experience will likely have been within Design and Engineering Project Management. You will have a good knowledge of construction techniques and processes across shafts and head house structures, above and below ground with a focus on shaft fit-out and architectural design, with an appreciation of both temporary and permanent MEP as well as rail systems activities. Main Responsibilities -Leading on all things design for their particular asset, liaising with the Stage 4 close out team and assisting elsewhere when required. -Management for their asset of all Design activities related to the shaft fit out incl. blockwork, fire-proofing, steelwork, doors, hatches, drainage, etc. and architectural design of the shafts and headhouses incl. misc. steel works, façade/cladding, roofing systems. You will also be involved with the integration of MEP systems. -Liaison with design consultant, MEP team, Design Integrator, Engineering team, Construction team, QA team, Commercial team, Planning team and Cost control to provide relevant design input as required. -Review Technical Queries (TQs)/RFIs, FCDs and NCRs as required, as well as Material Compliance Records (MCRs). -Management of Design integration and change control during construction. -Promote best practice in safety management through application of risk assessment, and ensuring CDM 2015 regulations are considered in the design and challenging the designer when required. Experience Required: -Educated to degree level or higher (preferably BEng or higher (MEng, MSc) and hold a relevant professional qualification. -Experience in project-based design and management across all project stages. -Good knowledge of construction of shafts and headhouses with focus on fit-out and architectural elements, along with MEP interfaces. -Experience of large complex projects where involvement with multi-discipline integration was required. -Good understanding of the NEC contract and have experience in its application. -Have an appreciation of BIM and the 3D environment, and have an understanding of digital engineering in design, construction and handover phases. -Thorough understanding of managing design related project risks. -Thorough understanding and application of the CDM Regulations 2015. -Strong understanding of Engineering Principles and extensive technical knowledge of construction techniques and best practices

Architect / Architectural Technologist - 12-Month Contract Exeter 41.28/hr ASAP Start Why This Role? Lead projects, not just deliver them: Take ownership of projects in a leading role within a top 5 AJ100 practice-this isn't just drawing production Strong rate: 41.28/hr inside IR35, with genuine 12-month duration Variety and challenge: Work across Education, Commercial, Energy, Defence, and Residential sectors with a multi-disciplinary team of 200+ professionals across the Midlands, South-West and Wales region Exeter-based: Part of a balanced team from graduates to directors in a growing studio environment The Role You'll be taking projects from concept through to delivery on site, working with clients and contractors whilst leading and coordinating multi-discipline design teams. This is genuine project ownership-leading teams, ensuring design coordination, managing interfaces and clashes, and delivering across RIBA stages. You'll be working on a range of complex projects varying in scale and sector, producing detailed design solutions, specifications, and coordinating BIM models in a fully integrated multi-disciplinary practice. What You'll Be Doing Leading projects through RIBA stages from concept to on-site delivery Leading and coordinating multi-discipline design teams Working directly with clients and contractors Managing design coordination, interface resolution, and clash detection Producing specifications using NBS software Analysing and advising on materials selection and detailed design solutions Delivering projects of varying complexity and scale What We're Looking For Essential: ARB Part 3 qualified or CIAT Chartered (5-10 years post-qualification experience) Demonstrable experience on complex projects across different sectors and RIBA stages Strong understanding of UK Building Regulations and RIBA Plan of Work Proficiency in Autodesk Revit and AutoCAD Experience leading design teams and working directly with clients/contractors Highly Desirable: Advanced collaboration software experience (Navisworks) BIM model federation, model checking, clash and interface management On-site job running experience NBS proficiency Personal qualities: Strong interpersonal skills and ability to work independently Excellent organisation and time management Consistent accuracy in work produced Self-motivated with a positive, can-do attitude Able to work effectively under pressure to tight deadlines Contract Details Duration: 12 months, ASAP start Pay rate: 41.28/hr (inside IR35, PAYE on payroll) Hours: 37.5/week Location: Exeter Notice period: 4 weeks to agency, 2 weeks to contractor Security clearance: BPSS level required How to Apply Send your CV with a brief note highlighting your relevant project leadership experience and sector background. Questions? Get in touch directly. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Assistant Survey Manager Hours: Monday to Friday 08.00 am to 17.00 pm (42.5) Location: Plymouth Devonport Royal Dockyard - reliably commute or plan to relocate before starting work (preferred) About us Infocus Resources is a dynamic construction organisation specialising in Manpower Recruitment to various Sectors including, civils, rail and general construction. Committed to delivering high-quality services to our clients, we provide opportunities for professional growth in a supportive work environment. About the job We are seeking a detail-oriented and proactive Assistant Survey Manager. This role involves assisting the Survey Manager in coordinating and executing site surveys, maintaining data accuracy, supporting QA/QC documentation, and ensuring alignment with project specifications and industry standards. The ideal candidate will have experience in leading a civil engineering or surveying team and a strong understanding of the implications of operating to QC1 procedures. Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks. Eligibility criteria Candidates must hold a passport from a NATO, or MISWG member country and have resided in the UK for the past 5 years. About the role As an experienced Survey Manager, you will be responsible for the following: • Assist the Manager with all aspects of surveying activities on site, with the focus on managing a growing team of surveyors and technicians as the project moves into main works. General operations include supporting the following key activities: o Maintain control networks across multiple independent construction work areas. o Maintain a prism and scanning multi-instrument automated total station (ATS) network, using Leica GeoMoS. o Manage manual surveying monitoring programmes to report structural or surface level movements. o Establish machine control for excavation and dowel drilling (TPS). o As-built scanning of existing structures. Processing of point clouds to validate designer s confederated models. o Demolition scanning for as-built records and conformity checks to design. o Quality assurance surveys for construction of RC structures; through pre-pour, post-pour checks. o As-built surveys, through laser scanning and modelling of point clouds • Ensure data is collected and recorded accurately, following project QA/QC standards. • Support the preparation of reports, drawings, and data outputs for engineering and construction teams. Operating as the checking and approving function of site teams. • Oversea the management of equipment, ensuring it is properly calibrated and functioning. • Coordinate with site engineers, supervisors, and subcontractors to ensure alignment of operations. • Assist with the implementation of quality control procedures, particularly in accordance with QC1 requirements, maintaining the highest standards of traceability, tolerances, reporting. • Manage and archive files and records to support project compliance and audits, using the Projects Document Management system. • Attend daily briefings and provide updates on progress and any issues / constraints to progress. • Ensure all works are carried out in accordance with health, safety, and environmental regulations and project requirements. This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given. Who are we looking for? • Degree, diploma, or relevant qualification in Civil Engineering, Surveying, or Construction. • Site based role. • Significant experience surveying industries. • 3-5 years of experience in a similar senior or survey managers position on a civil engineering project. • Familiarity with total stations, GPS/GNSS, laser scanners, and data processing software (e.g., AutoCAD Civil 3D, Leica Infinity, Leica Cyclone and Leica 3DR). • Understanding of QC1 procedures and quality documentation in a civils context. • Strong attention to detail and organizational skills. • Excellent communication and teamwork abilities. • CSCS Card and relevant site safety qualifications, SMSTS/SSSTS preferred. • Member of the CinstCES (or technical member working towards full member), or another body. • Ability to work under pressure and meet tight deadlines. Desirable • Experience working on major infrastructure or utilities projects (e.g., highways, rail, water, energy, nuclear). • Knowledge of BIM or digital construction processes. • First aid and additional safety training certifications. Licence/Certification: • EU, NATO, 5 Eyes, or MISWG member passports (preferred) What we do Infocus are a construction consultancy providing solutions for the UK s leading Infrastructure, Utility and Construction providers. If you are interested in the role, please apply now. Contact Cheryl Smith - (phone number removed) Equal Opportunity Employer Infocus Resources are proud to be an equal opportunity employer, meaning all qualified applicants will be considered for employment and will not be discriminated against based on age, race, religion, national origin, gender identity or expression, sex, sexual orientation, marital status, veteran status, disability or any other protected category under local law. We know that it is the differences in our people that make our company a better and more welcoming place to work.

Our client are looking for an experienced Senior Design Manager is sought to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What they Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.

Our award winning Client is a national independently owned building services consultancy delivering high-quality mechanical, electrical and public health (MEP) design solutions across sectors including commercial, residential, healthcare, education and mixed-use developments. The Leeds office plays a key role in delivering technically robust and innovative engineering solutions for projects across the UK. Role Overview The company is looking to hire an experienced BIM Manager to lead and develop BIM strategies across the Leeds office. This is a senior leadership role responsible for overseeing BIM standards, digital workflows, information management, and coordination processes across all projects. The successful candidate will drive best practice in accordance with ISO 19650, support project teams in achieving high-quality digital outputs, and contribute to the wider digital strategy of the business. Key Responsibilities: Strategic & Leadership Lead BIM strategy and digital delivery within the Leeds office. Develop, implement, and maintain office BIM standards and protocols. Ensure compliance with ISO 19650 and project-specific BIM Execution Plans (BEPs). Act as the primary BIM lead for clients and external consultants. Contribute to company-wide digital strategy and innovation initiatives. Project Delivery Oversee BIM implementation across multiple MEP projects. Provide technical guidance on model setup, coordination, and information management. Review federated models and ensure coordination standards are met. Support clash detection processes and multidisciplinary collaboration. Monitor model quality, data integrity, and compliance with company standards. Technical & Systems Management Manage and maintain BIM templates, libraries, and shared parameters. Oversee Common Data Environment (CDE) platforms such as Autodesk Construction Cloud / BIM 360 or Viewpoint. Support development of automation tools (e.g. Dynamo) where appropriate. Drive efficiency improvements through digital workflows and standardisation. Team Development Mentor and develop BIM Coordinators and Technicians. Deliver internal BIM training and upskilling initiatives. Support recruitment and onboarding of digital delivery staff. Promote a culture of collaboration and continuous improvement. Key Requirements: Essential Significant experience in a BIM Manager or Senior BIM leadership role within a building services consultancy. Advanced proficiency in Revit MEP, Navisworks and AutoCAD. Strong working knowledge of ISO 19650, UK BIM Framework and Information management processes. Experience managing CDE platforms. Proven ability to implement and manage BIM standards across multiple projects. Strong leadership, communication, and stakeholder management skills. Understanding of UK building regulations and MEP coordination requirements. Desirable: Experience working across healthcare, commercial, or large-scale residential sectors. Knowledge of 4D/5D BIM processes. Experience with Dynamo or other automation tools. Degree in Building Services Engineering, Digital Construction, or related discipline.

About the Company We are a specialist fire protection contractor delivering LPCB-approved water mist and fire suppression systems across residential, commercial, hospitality and specialist sectors throughout the UK. Due to continued growth and an expanding project portfolio, we are looking to appoint a Design Engineer to join our technical team at our Wakefield head office. The Role This role will suit a Design Engineer with experience in mechanical, building services, MEP or specialist systems design who is looking to move into the fire suppression sector. You will be responsible for developing compliant, practical and cost-effective fire suppression designs, working closely with Project Managers and Site Teams from concept through to installation. Full support will be provided to develop sector-specific knowledge, including LPCB standards and relevant British Standards. Key Responsibilities Design of water mist and fire suppression systems Produce technical drawings using AutoCAD (Revit desirable) Carry out hydraulic calculations and system layouts Prepare technical submittals and design documentation Attend design coordination meetings Work collaboratively with project and site teams Ensure designs comply with relevant British Standards and LPCB requirements About You We are open to candidates from a range of technical design backgrounds. You may currently be working as: Mechanical Design Engineer Building Services Design Engineer MEP Design Engineer HVAC Design Engineer Piping / Pipework Design Engineer Fire Systems / Life Safety Design Engineer Essential: Experience in mechanical or building services design Strong understanding of technical drawings and system layouts AutoCAD proficiency Ability to perform calculations (hydraulic or similar system-based calculations) Strong attention to detail and technical accuracy Desirable (but not essential): Experience in fire suppression or sprinkler systems Knowledge of relevant British Standards LPCB awareness or qualification Revit / BIM experience HNC/HND or Degree in Mechanical / Building Services Engineering What's on Offer Competitive salary up to 60,000 + package Structured training and support into the fire suppression sector Opportunity to gain LPCB qualifications Career progression within a growing specialist contractor Modern office environment

Job Title: BIM Manager Location: 60% Hybrid in the office Manchester (preferred), Sheffield, Leeds, Birmingham, Newcastle Blackpool, Glasgow Contract Duration : Dec 2026 & Mar 27 Daily Rate: £350/day (Umbrella Maximum) IR35 Status: Inside IR35 Key Responsibilities Manage BIM strategy and compliance, ensuring alignment with BS EN ISO 19650, the UK BIM Framework, and the organisations digital transformation goals. Manage asset information standards, including the development and maintenance of Asset Information Requirements (AIR), Exchange Information Requirements (EIR), and digital handover protocols. Oversee BIM deliverables and assurance, conducting audits and quality checks to ensure data integrity, model accuracy, and compliance with project and operational requirements across project portfolios. Integrate BIM with operational systems, supporting the connection between BIM, CAFM/IWMS platforms, and facilities management processes. Support lifecycle asset management, ensuring that structured data supports maintenance, space planning, sustainability, and long-term operational efficiency. Support the effective use of the Common Data Environment (CDE), ensuring secure, consistent, and collaborative use across internal teams and external partners. Lead and mentor BIM team members, including Assistant BIM Managers and Revit Technicians, fostering a culture of continuous improvement and digital excellence. Drive stakeholder engagement and training, promoting BIM adoption across departments and representing the organisation in industry forums and working groups. Monitor performance and innovation, using KPIs and feedback to identify opportunities for improvement and support the development of digital Experience Proven experience in BIM strategy development and implementation, aligned with BS EN ISO 19650 and the UK BIM Framework. Hands-on experience developing and managing asset information standards, including AIRs, EIRs, and digital handover documentation. Extensive experience in BIM assurance and quality control, including audits, model reviews, and ensuring compliance with operational and project requirements. High level of competency in BIM software, including advanced skills in Autodesk Revit and Navisworks; experience with other Autodesk tools is beneficial. Experience delivering structured data outputs, including IFC and COBie, for use in asset and facilities management systems. Experience with integration of BIM with operational platforms, such as CAFM or IWMS systems, to support facilities and lifecycle asset management. Strong organisational and project delivery skills, with the ability to manage multiple tasks, priorities, and stakeholders effectively via use of trackers and log management products to streamline digital workflows. Proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, Visio, Project, SharePoint Lists, Planner, and Power BI. Experience using or supporting Common Data Environments (CDEs) to ensure secure, collaborative, and consistent information management. Team leadership and mentoring experience, particularly in managing BIM professionals and supporting digital capability development. Stakeholder engagement and training delivery, promoting BIM adoption across departments and representing the organisation in external forums. Performance monitoring and innovation, using KPIs and feedback to drive continuous improvement and support digital twin development Desirable Experience Experience working with asset or facilities management functions, particularly in aligning BIM outputs with operational needs. Capable of problem solving and process management, including the development and implementation of digital workflows. Familiarity with multiple digital document sharing platforms and their integration with BIM and CDE environments. Ability to coordinate with third-party BIM and digital consultants, ensuring alignment with client-side standards and expectations. Demonstrated ability to multitask across projects of varying scale and complexity, while maintaining quality and compliance. Demonstrated commitment to health and safety, including the use of BIM/3D models to support Construction Design Management (CDM) and hazard mitigation. Technical Skills Autodesk Revit Advanced proficiency for model review, coordination, and data extraction with large and complex model datasets across several disciplines Navisworks Manage For clash detection, model aggregation, and 4D simulation. Common Data Environment (CDE) platforms Experience with tools such as Autodesk Construction Cloud, Viewpoint, Asite, or Bentley ProjectWise. IFC and COBie standards Ability to manage and validate structured data exports for asset handover and FM integration. Microsoft Office Suite Strong skills in Excel, Word, PowerPoint, Visio, and Project for documentation, reporting, and planning. SharePoint Lists, Planner, and Power BI For task tracking, collaboration, and data visualization/reporting. BIM authoring and coordination tools Familiarity with AutoCAD, BIM 360, and Navisworks. Data validation and scripting tools Basic understanding of Dynamo for Revit (desirable) to automate tasks and enhance model intelligence. CAFM/IWMS integration Understanding of how BIM data connects with CAFM/IWMS platforms. Model checking and validation tools Experience with tools like Solibri is advantageous. Disability Confident As a member of the disability confident scheme, CLIENT guarantees to interview all candidates who have a disability and who meet all the essential criteria for the vacancy. In cases where we have a high volume of candidates who have a disability who meet all the essential criteria, we will interview the best candidates from within that group. Armed Forces Covenant CLIENT is proud to support the Armed Forces Covenant and as such, we guarantee to interview all veterans or spouses / partners of military personnel who meet all the essential criteria for the vacancy. In cases where we have a high volume of ex-military candidates / military spouses or partners, who meet all of the essential criteria, we will interview the best candidates from within that group. If you qualify for the above, please notify us on (phone number removed). We will be in touch to discuss your suitability and arrange your Guaranteed Interview. Should you require reasonable adjustments at any point during the recruitment process or if there is a more accessible way for us to communicate, please do let me know. To apply for this role please submit your latest CV or contact Aspect Resources on (phone number removed)

Client Information PSR are working with a well-established Midlands-based Mechanical & Electrical design and build contractor operating across a diverse range of industrial and commercial sectors. Due to continued growth within their Mechanical Projects division, they are looking to appoint an experienced Mechanical Building Services Project Engineer to join their Nottingham office. This is an excellent opportunity to join a contractor delivering Mechanical HVAC projects ranging from approximately 50k to 5m+ in value. Mechanical Building Services Project Engineer - Roles & Responsibilities Manage the project management, coordination, installation and commissioning of Mechanical HVAC systems within commercial and industrial buildings. Develop system specifications and prepare construction drawings, plant and equipment schedules, and associated documentation. Produce technical submissions and manage RFI communications with Project Managers. Place orders with suppliers and subcontractors. Coordinate and manage site works, including subcontractor supervision. Manage contract costs from inception through to final account, including preparation and agreement of monthly applications for payment. Monitor project costs including labour, materials, forecasting and P&L tracking. Manage variations, additional works and associated commercial implications. Conduct site visits, inspections and attend client and subcontractor meetings. Resolve technical and construction issues during project delivery. Organise and oversee commissioning and start-up of new systems. Prepare Operating & Maintenance (O&M) manuals. Provide technical support and client training where required. Stay up to date with the latest HVAC technologies and industry standards. Mechanical Building Services Project Engineer - Requirements HNC / HND or Degree in Mechanical Building Services (or alternative route demonstrating equivalent competence). 10+ years' experience within the Mechanical HVAC design and build industry. Strong understanding of HVAC principles and industry practices. Experience or working knowledge of AutoCAD and Building Information Modelling (BIM) software (desirable). Excellent written and verbal communication skills. Strong commercial awareness and cost management ability. Ability to work independently and as part of a team. Strong analytical and problem-solving skills. Based within reasonable commuting distance of Nottingham (office-based role). Mechanical Building Services Project Engineer - Benefits 50,000 - 60,000 per annum (commensurate with experience and capability). Comprehensive benefits package including company car, phone, computer, pension and bonus scheme. Opportunity to work on challenging, high-value commercial and industrial projects. Supportive and collaborative working environment. Full-time, permanent position based in Nottingham. If you would like to apply for this Mechanical Building Services Project Engineer role, click apply now.

Job Title: Joinery Design Manager - Cat B Commercial Fit-Outs Location: London / South East (hybrid options possible) Salary: £50,000-£55,000 + benefits Contract: Permanent About Us We are a specialist joinery and fit-out contractor delivering high-end Cat B joinery packages for offices, hospitality, and commercial interiors across London. Our projects include bespoke reception desks, feature joinery walls, acoustic panelling, tea points, and breakout furniture. We provide turnkey Cat B joinery solutions, combining design, manufacture, and installation, with a strong focus on quality, innovation, and client satisfaction. The Role We are looking for a Joinery Design Manager to lead our Cat B joinery design function, coordinating multiple commercial fit-out projects and managing a small design team. This role is approximately 75% management / 25% hands-on design, meaning you will spend most of your time planning, mentoring, and overseeing Cat B joinery projects, while also contributing to drawings and technical solutions for complex bespoke elements. Key Responsibilities Lead and manage the Cat B joinery design team, providing guidance and mentoring on commercial fit-out projects. Plan, coordinate, and prioritise multiple Cat B joinery packages, ensuring deadlines and budgets are met. Liaise with project managers, site teams, clients, and main contractors to deliver seamless Cat B joinery workflows. Oversee and approve all technical drawings, shop drawings, and fabrication documentation for Cat B joinery packages. Contribute hands-on CAD / SolidWorks / AutoCAD drawings for complex or bespoke joinery elements (25% of role). Implement quality control, design standards, and design-for-manufacture principles across all Cat B joinery projects. Support continuous improvement initiatives, including value engineering and workflow optimisation. Required Skills & Experience 5+ years' experience in Cat B joinery design or fit-out design management, preferably in high-end commercial interiors. Strong SolidWorks and AutoCAD skills; Revit/BIM experience is desirable. Experience leading design teams, mentoring junior designers, and coordinating multiple Cat B joinery projects. Proven record delivering bespoke Cat B joinery packages, including reception desks, feature walls, tea points, storage, and acoustic panels. Knowledge of manufacture-to-installation workflow and coordination with workshop teams. Excellent organisational, communication, and leadership skills. Degree or diploma in Interior Design, Architecture, or Joinery/Carpentry preferred. Benefits Competitive salary with performance bonus potential Hybrid working options Career progression and professional development Pension scheme, private healthcare, and wellness benefits Opportunity to work on high-profile Cat B joinery projects in London

Quantity Surveyor based in Glasgow with a Tier 1 contractor My client is a Tier 1 contractor, looking for a Quantity Surveyor to join their Glasgow commercial team on several exciting projects with an order book for the next 10 years. Commercial Duties: Preparation of cost estimates, bills of quantities and tender documents.Negotiating with suppliers and subcontractors to obtain the best prices and terms.Managing project budgets, including forecasting and monitoring costs.Maintaining accurate records and documentation of all project-related costs and financial transactions.Provide expert advice on procurement, risk management and cost-saving measures. Understanding the client requirements and quantities take off as per marking and drawings.Preparing BOQ (bill of quantities) by studying specification sheets from the design/operations team.Identifying gaps between BOQ and drawings, specifications and conditions of the contract and taking it for a logical closure.Monitor and control costs throughout the project, identifying cost-saving opportunities.Participation in the pre-delivery activities with client, architect and project managers and raising relevant pre-delivery queries from the given party.Preparing quotations for specific works as required by the client.Manage the valuation of work done and handle applications for payment and variations.Preparing interim and final valuations, variations and claims of the project.Conduct feasibility studies and value engineering exercises.Collaborate with stakeholders to optimise project outcomes and achieve value for money.Onboarding of new supply chain partners within contractPreparation and execution of supplier enquiries through to evaluation and letting of packages.Production and management of subcontractor task orders for works within project. Business Partnering: As a point of contact between the Commercial Department and the Delivery Teams, the key tasks will be:Assist in the maintenance of robust cost, value reconciliations for provision of P&L and cash flows;Assistance in monthly reviews of information supplied to the Authority; Assistance in production of forecasting and actuals; andAct as a commercial advisor - offer general commercial support to the business decision makers; Other Responsibilities: Uphold, safeguard and promote the organisation's values and philosophy particularly but not limited to ethics, integrity, health and safety and corporate social responsibility, as referred to within the Company's relevant policies, and the companies Code of Conduct. Essential Skills: Bachelor's degree in quantity surveying, construction management or a related field.5+ years of experience in quantity surveying or cost consulting, preferably in the construction industry.Sound knowledge of construction industry practices, regulations and standards.Proficiency in cost estimation and cost management techniques.Familiarity with contract administration and legal aspects of construction projects.Experience working with AutoCAD and validating quantities from the given drawings.Ability to manage multiple projects simultaneously and prioritise tasks effectively.Strong analytical and problem-solving skills with extraordinary negotiation abilities.Proficiency in relevant software and tools for quantity surveying.Excellent analytical skills with the ability to interpret raw data and translate it into clear, concise informationStrong communication and presentation skillsExcellent knowledge of MS-Office 365, in particular EXCEL Desirable Skills: Professional membership or certification in quantity surveying or construction management.Knowledge of health and safety regulations and environmental standards.Experience with building information modelling (BIM) and quantity takeoff software.Familiarity with contract law and construction contracts.Attention to detail and a commitment to delivering high-quality work.Strong project management skills and ability to work under pressure.German language Commercial minded with ability to see the bigger picture Experience in managing auditors, tax advisors and other external advisorsAbility to apply knowledge and creativity to resolve complex issuesKnowledge of CONFIRM softwareExperience working in an international group with a foreign parent company There is also a hybrid policy in place should you want to work from home as well - If you are interested in this position, please do not hesitate to contact me on the details below Interested in finding out more? Please contact me - confidentially on the details below. #

Precast Designer, Precast Technical Manager, Precast Engineer Your new company We are partnering with a leading provider of construction solutions, renowned for delivering large-scale precast concrete projects. From a small block manufacturer, this company has evolved into a market leader in offsite construction, operating multiple production facilities across Northern Ireland, Scotland, and England.As innovators in sustainable building practices, they offer advanced solutions such as insulated precast flooring systems and rapid-build cross-wall structures for residential developments, student housing, social housing, and hotels. Their strong reputation stems from successfully completing high-profile projects in the commercial, educational, and infrastructure sectors, leveraging cutting-edge technology and offsite methods to enhance efficiency, quality, and sustainability.They are currently seeking a Senior Technical Manager to join their team at the Toomebridge, Antrim office. Your new role As Senior Technical Manager, you will lead the technical engineering team responsible for designing and detailing major precast projects. Key responsibilities include: Managing technical critical paths to ensure deadlines are met Providing expert guidance to Sales, Manufacturing, Construction, and Technical teams Driving the implementation of BIM and 3D modelling software Developing and mentoring technical staff Overseeing design stages for complex, high-profile projects Building strong client relationships to deliver safe, innovative structural solutions What you'll need to succeed Degree in Civil or Structural Engineering Minimum of 3 years' technical management experience in a design office within construction Knowledge of precast concrete systems (preferred) Experience with structural analysis software (Autodesk Robot desirable) Proficiency in AutoCAD; familiarity with Revit and BIM processes advantageous Strong leadership, communication, and client-facing skills What you'll get in return Our client is offering an attractive annual salary negotiable on experience. Feel free to contact Hays to discuss. You will enjoy the company's benefits, and it also offers comprehensive training programs like regular training to equip employees with necessary skills and knowledge. They also emphasise strong relationships and teamwork, fostering a supportive and flexible work environment.This is a full-time, office-based job. What you need to do now If you're interested in this Senior Technical Manager role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #

Guildmore is seeking an experienced Senior Design Manager to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What We Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.

Senior Building Surveyor Surrey Construction Consultancy Salary up to 65k An exceptional opportunity has arisen to join a high-growth, multi-disciplinary property and construction consultancy with a stellar reputation across both the public and private sectors in the UK and internationally. They are seeking an ambitious Senior Building Surveyor to play a pivotal role in the continued expansion of their Surrey Building Surveying team. This is far more than a technical role. It's a career-defining opportunity for a driven professional who wants a clear and realistic pathway to Director level, real influence over a growing service line, and exposure to some of the most prestigious property assets in the market. Why this role stands out Work directly alongside the Head of Building Surveying, helping to shape strategy, grow the team and develop key client relationships Genuine progression to Director for the right individual Exposure to prime and super-prime residential, landmark commercial buildings, theatres, and major mixed-use developments across London and the Southeast Collaborate closely with Project Managers, Quantity Surveyors, Bank Monitoring Surveyors and Expert Witnesses, gaining breadth rarely found in similar roles Play a key part in mentoring and supporting junior surveyors through their APCs and professional development The role You will take a lead role in delivering a wide range of building surveying services for private clients and local authorities, while also acting as a key fee earner and business generator within a fast-growing team. Responsibilities will include: Developing new business relationships and expanding existing client accounts Preparing competitive fee proposals and contributing to team revenue growth Delivering a broad range of professional building surveying services, including: Measured and building surveys (residential and commercial) Party Wall matters Specifications, tendering and contract documentation Contract Administration Dilapidations Defect analysis and reporting Licences to Alter (including monitoring and sign-off) Supporting Expert Witness work, including site inspections and CPR35 reports You'll be expected to take ownership of projects, drive them forward proactively, and consistently deliver an outstanding level of service. About you RICS-accredited degree in Building Surveying MRICS qualified Confident communicator with strong interpersonal skills Highly organised, detail-focused and commercially aware Comfortable working with clients, contractors and multidisciplinary teams Strong IT skills (Microsoft Office essential; CAD/BIM experience advantageous) Motivated by excellence, leadership and long-term career progression If you're a Senior Building Surveyor looking for real influence, exciting projects and a clear route to the top, this opportunity should not be missed! Apply today! If you would like to find out more about this amazing opportunity, please contact Georgie Marden. Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Assistant Design Manager (MEP) Location: North East London / Remote / Site-based Working Pattern: 3 days Office/Site, 2 days Work From Home (WFH) Reporting to: Design Manager / Senior Design Manager Role Overview On behalf of my client , a leading specialist in mechanical and electrical building services, I am seeking a technically minded Assistant Design Manager to join their pre-construction and delivery team. This role is a strategic hire designed to support the management of the design process across a diverse portfolio of high-value residential and commercial projects. The successful candidate will possess a strong MEP background and the ability to navigate the complexities of design coordination. My client offers a balanced hybrid working model, allowing for two days of remote work while ensuring high-level collaboration across their North East London office and various site locations. Key Responsibilities Design Coordination: Support the management of the design process from RIBA Stage 3 through to construction, ensuring all MEP services are fully integrated with the wider building fabric. Technical Compliance: Conduct thorough reviews of drawings, specifications, and technical submittals to ensure adherence to British Standards, Building Regulations, and client requirements. RFI & Tracker Management: Oversee the Request for Information (RFI) process and maintain live design trackers to ensure the site teams have the most current information. Stakeholder Liaison: Act as a key point of contact between external consultants, architects, and the internal project delivery team to resolve technical discrepancies. Site Integration: Attend regular site visits to ensure the physical installation aligns with the approved design and to troubleshoot any on-site coordination issues. Candidate Profile MEP Expertise: You must have a demonstrable background in Mechanical, Electrical, or Public Health engineering (ideally with a sub-contractor or consultancy). Experience Level: Ideally 2 5 years of experience in a technical or design-focused role within the construction industry. Software Proficiency: Familiarity with AutoCAD and BIM/Revit workflows is essential for reviewing and coordinating models. Communication: Strong verbal and written communication skills, with the confidence to challenge design decisions and present solutions in Design Team Meetings (DTMs). Qualifications: A degree or HNC/HND in Building Services Engineering or a related technical discipline. Benefits of the Role Hybrid Flexibility: A formalized 2-day WFH policy to provide autonomy and work-life balance. Clear Progression: My client is committed to internal promotion; you will be mentored directly by a Senior Design Manager with a view to taking full project ownership. Project Variety: Gain exposure to complex energy centers, large-scale residential schemes, and innovative HVAC technologies. For more information, contact Matt Jones on (phone number removed)

Position BIM Manager Location London Are you a highly skilled BIM Manager with a passion for Digital construction? We are currently seeking an experienced BIM Manager to join our prestigious main contractor client in London. You will lead the BIM implementation & management for a 100m data centre in London working alongside the design and construction teams. What will the role involve? You will manage all BIM-related activities throughout the project lifecycle, ensuring compliance with industry standards, protocols & client requirements. Collaborate closely with key project stakeholders, including Architects, engineers, subcontractors, and consultants, to establish BIM workflows, goals, and deliverables. You will lead on the development & implementation of BIM Execution Plans (BEPs) and BIM protocols for the project, overseeing the coordination, integration, and clash detection of multidisciplinary models. Utilize BIM software & tools to create, manage & update 3D models, documents & databases. Organize and chair BIM coordination meetings, clash detection sessions, and VDC workshops. Provide training & support to colleagues on BIM processes, methodologies, and software usage. What experience will I need to possess? Previous experience as a BIM Manager or similar role, preferably with a main contractor Strong proficiency in BIM software, such as Revit, Navisworks, AutoCAD & BIM 360. In-depth knowledge of BIM standards (e.g., BS 1192, ISO 19650) and industry protocols Demonstrated expertise in BIM coordination, clash detection, and model integration. Familiarity with cloud-based collaboration platforms & EDMS. Excellent communication skills, with the ability to liaise effectively with diverse stakeholders. A degree in Architecture, Engineering, Construction Management, or a related field is desirable. Why should I apply for this role? Opportunity to work on a prestigious 100 million office project in Leeds. Join a reputable main contractor with a commitment to innovation and excellence. Collaborative and supportive work environment overseen by a highly regarded manager. Professional development and training opportunities with clear progression ladder. Comprehensive benefits package, including health insurance and pension sch

MB913: High Voltage Systems Project Manager Location: Snowdonia Salary: £75,000 - £80,000 + £6,325 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP Overview: First Military Recruitment is proudly working in partnership with a fantastic national construction business who are looking to recruit a High Voltage Systems Project Manager on a permanent basis due to growth based at either their Snowdonia depot. Duties and Responsibilities: To lead and manage the High Voltage (HV) Cable and HV Plant subcontractors ( in delivering the works and ensuring compliance with all relevant requirements. To manage the HV designer and sub-contractor design activities and deliverables to ensure they are completed in line with the agreed Programme and Project requirements. To be the technical lead for the HV works on the project Ensure both input and output deliverables for the design are tracked and reported to the Project Director and Engineering Manager as required. To manage the MEP designer and sub-contractor design activities and deliverables to ensure they are completed in line with the agreed programme and Project requirements. Manage and communicate all design queries, comments and information required from Design workshops and meetings and keep records. Raise requests for further information internally and externally from the whole project team. Support the Design manager to ensure all HV and MEP design deliverables are timeously provided as per the of design programmes. Review Designers Monthly reports and submissions and produce monthly reports on design progress and any other design specific elements. Manage and update the design deliverable schedule. Review all design deliverables and ensure that they are completed to the expected standard. Challenge and resolve when not, including reviewing of all drawing in line with the Clients Scope/requirements. Attend interface meeting with external parties and assign/follow up on actions related to the Design. Arrange internal design interface meetings with construction department Ensure compliance with design management processes required by the contract. Collaborate with the engagement of external suppliers/subcontractors. Manage provision of drawings to project team document control. Manage the BIM requirements for permanent and temporary works together with the BIM/CAD Technician. Identify Temporary Works and assist lead TWC with preparing Design briefs for HV & MEP Designs from subcontractors. Skills and Qualifications: 10 Year plus experience with on high voltage projects with a Contractor Previous experience on National Grid (NG) Projects as an Contractor, preferably on 400kV, 275kV or 132 kV circuits Advantage to have experience on Design & Build Project as an Contractor. Previous experience and knowledge of National Grid Transmission Procedures and Technical Specification Wide-ranging understanding and working knowledge of construction methods and outputs Will have both substantial construction and design experience. Understands the Principal Designer and Principal Contractor Duties Exceptional know-how in implementing and promoting Digital Engineering practises in Design as well as construction. MB913: High Voltage Systems Project Manager Location: Snowdonia Salary: £75,000 - £80,000 + £6,325 Car Allowance Working Hours: Monday to Friday, 37.5 hours per week Additional Company Benefits: Exceptional Career Development Opportunities, Company Car/Car Allowance (Depending on job grade), Pension matched up to 8%, 25 days annual leave plus holiday (opportunity to buy/sell leave will be implemented from January 2026), Private medical insurance, Free 24/7 EAP

Design Manager Modular Healthcare Buildings Job Title: Design Manager Modular Healthcare Buildings Job reference Number: (phone number removed) Industry Sector: Senior Designer, Design Manager, Architectural Designer, Modular Healthcare Designer, AutoCAD, Revit, BIM, Modular Construction, Offsite Construction, Modular Buildings, Healthcare Architecture, Hospital Design, Healthcare Facility Planning, Prefabricated Buildings, DfMA, HTM, HBN, Healthcare Developer, Sustainable Modular Design, Turnkey Modular Solutions. Location: Hull (hybrid working available) Remuneration: £45,000-£55,000 Benefits: 5% matched pension, 4x death in service, 25 days annual leave, health cash plan The role of the Design Manager Modular Healthcare Buildings will involve: Design Manager Position dealing with permanent modular buildings in the healthcare sector. Co-ordinating all design matters between the key project stakeholders (Client, Design Team, third party specialist designers, Contractor and Developer) Ensure that workloads are prioritised in line with project programmes and deadlines Overseeing technical documentation to support tenders / quotations and design related queries where required Liaise regularly with internal and external teams Ensuring that drawings are completed to the highest levels, to standards and client specifications Working on 2-3 projects at a time Working on projects from £0.5-£10 million The ideal applicant will be a Design Manager Modular Healthcare Buildings with: Must have design experience with the modular sector. Ideally have had experience working within the healthcare sector Ideally have Autodesk proficiency Strong communication skills across all levels both written and verbal Excellent negotiation and relationship building skills Familiar with working in a fast paced environment dealing with multiple projects at any one time Mitchell Maguire is a specialist construction recruitment consultancy, dealing exclusively with construction jobs, construction vacancies and specification positions within: Senior Designer, Design Manager, Architectural Designer, Modular Healthcare Designer, AutoCAD, Revit, BIM, Modular Construction, Offsite Construction, Modular Buildings, Healthcare Architecture, Hospital Design, Healthcare Facility Planning, Prefabricated Buildings, DfMA, HTM, HBN, Healthcare Developer, Sustainable Modular Design, Turnkey Modular Solutions.

Are you passionate about being an Architectural Technologist? Are you seeking a challenging role that allows you to put your architectural expertise to work? If so, we have an excellent opportunity for you. We are recruiting on behalf of a leading Architectural firm based in Manchester. They are looking for an accomplished Architectural Technologist to join their innovative team. They are a large, national practice with offices dotted across the UK. Their Manchester studio is home to around 40 member of staff including Architects, Surveyors, project Managers and everything in between. Their current workload falls mainly within the Education sector, including schools and various college buildings. Whilst it would be useful to have an awareness of his sector, it s not essential for the role. What we are looking for can be found below: Degree in Architectural Technology or a related field. Minimum of 3 years of experience working as an Architectural Technologist. Proficiency in using AutoCAD, Revit, and other Architectural software. Solid understanding of UK building regulations, planning policies, and construction processes. Strong attention to detail and ability to produce accurate technical drawings. Excellent communication skills and ability to collaborate effectively with a multidisciplinary team. Self-motivated with the ability to prioritize tasks and meet project deadlines. Experience with sustainable design principles and Building Information Modelling (BIM) is advantageous. Some of the responsibilities of the Architectural Technologist will include: Collaborating with Architects and other stakeholders to develop Architectural designs, focusing on technical aspects and construction documents. Preparing accurate 2D and 3D drawings, models, and visuals using advanced architectural software (CAD, Revit, Sketchup, etc.). Assisting with building regulations compliance, including creating and submitting planning applications, building control drawings, and related documentation. Conducting regular site visits to ensure design specifications are being implemented accurately and provide technical support during the construction phase. Continuously staying updated with the latest technological advancements and building regs. What is on offer? A competitive salary, hybrid working model, modern-city centre office space and access to several high-profile and interesting projects. Please click the apply button if you would like to register your interest, or get in touch with Will at Conrad Consulting to discuss further.

Role: BIM Technician Location: Remote Duration: 3 Months Main Purpose of Job To support the development, coordination, and delivery of BIM models and digital information across multi-disciplinary construction design projects. The BIM Technician will work closely with design teams, project managers, and the BIM Manager to ensure the accurate production, integration, and maintenance of 3D models and associated data in line with company standards, client requirements, and ISO 19650 processes. Main Duties & Responsibilities Produce, develop, and maintain 3D BIM models using approved authoring tools, ensuring compliance with project BIM Execution Plans (BEP) and company standards. Assist in the coordination of architectural, structural, and MEP models, identifying clashes and supporting resolution through collaboration with design teams. Prepare 2D and 3D drawings, schedules, and model outputs required for design, tender, and construction stages. Support the integration of model data with asset information requirements, including COBie and other structured datasets. Contribute to maintaining model version control, ensuring updates are accurately recorded and distributed. Work collaboratively with consultants, contractors, and internal teams to ensure timely receipt and integration of design model information. Assist project teams in the correct application of BIM standards, workflows, and modelling best practices. Key Skills & Competencies Strong understanding of BIM processes within the ISO 19650 framework. Proficiency in BIM authoring tools (e.g., Revit, ArchiCAD, Civil 3D, Navisworks). Experience supporting model coordination and clash detection. For more information and immediate consideration please apply directly to this advert Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people.

1st Step Solutions are supporting a leading specialist Mechanical and Electrical contractor, who have an exciting opportunity for an experienced BIM Lead on a permanent basis based in London. Our client work on a range of high-profile projects within London and surrounding areas. Key Responsibilities: Lead and manage BIM delivery across all client projects. Provide BIM-related cost input during bid stages, aligned with project-specific deliverables and programme requirements. Produce models, sketches, or drawings as needed to support tender presentations and submissions. Following successful bids, assess and recommend the most suitable BIM procurement strategy. Prepare and issue BIM package enquiries to the supply chain, evaluate returned submissions, and present recommendations to the Project Director. Collaborate with Project Directors to develop coordinated drawing and delivery programmes, integrating resource requirements and key milestone dates into the overall project schedule. Work with Document Controllers to implement BIM workflows, ensuring BIM Coordinators receive accurate and timely information to operate effectively. Provide guidance to project teams on BIM processes and coordination matters related to subcontractor installations. Review and monitor the technical quality of all BIM outputs (internal and external), ensuring compliance with BIM Standards, Methods, Procedures, and industry best practices. Facilitate and chair coordination workshops as required by individual project needs. Oversee the production, review, and management of clash detection reports using tools such as Revizto, Solibri, and BIM Collaborate (or equivalent platforms). Support Project Surveyors, when requested, in developing variation accounts where coordination changes have resulted in claims. Provide regular progress updates to the Engineering Director, highlighting status, commercial matters, and any delays in drawing production across assigned projects. (carried out only when necessary and on an occasional basis): Coordinate and produce drawings for mechanical, public health, electrical services, and BWIC in accordance with BSRIA BG6 (2018) Stage 5, aligned to an agreed programme using Autodesk AEC Collection. Carry out additional drawing-related duties as needed, including sketches, installation drawings, fabrication details, modules, skids, and record drawings. Produce and amend project information in line with project standards, BIM Execution Plans (BEP), and related requirements. Ensure competent use of the Revit COBie plugin to generate accurate COBie data outputs from the model. Knowledge /Qualifications: Minimum 5 years experience as a BIM Manager or similar role Strong understanding of mechanical and electrical systems from both design and construction perspectives. In-depth knowledge of current mechanical, ventilation, domestic, public health, and electrical systems design and installation standards. Proficient in Autodesk AEC suite platforms, including Revit, AutoCAD, Navisworks, and BIM 360. Familiarity with mechanical subcontract CDP works, such as fire alarm, sprinklers, VRF/AC, smoke control, BMS, and EMS systems. Skilled at reading drawings and interpreting technical papers and documents. Capable of creating technical documents, reviewing and commenting on technical drawings, and supporting engineering solutions and design. On offer: Competitive salary 25 days annual leave Private Family Medical Insurance Pension Scheme (7% Employer/5% Employee)