Artisan Recruitment are working with an established marine engineering company to recruit an experienced Mechanical Engineer / Lead / Foreman to join their team. This is an excellent opportunity for a skilled marine engineering professional looking for a hands-on role with responsibility for leading mechanical operations, supporting teams on site, and delivering high-quality work for clients. Key Responsibilities Lead and manage all mechanical operations under the direction of the Line Manager. Maintain a 24/7 response mindset when a client calls, respond promptly and professionally. Keep your mobile phone available at all reasonable times for operational requirements. Work overtime as required, including weekdays and weekends. Apply strong problem-solving skills and provide clear, practical solutions. Plan ahead for each job by identifying requirements, ordering materials where authorised, and keeping the Line Manager fully informed. Represent the mechanical department professionally and maintain a high standard of customer service at all times. Maintain a clean, organised and safe workshop environment. Support welding tasks and assist other departments when required. Act as the Line Manager s right-hand support for all mechanical operations. Consistently go above and beyond in carrying out your duties and responsibilities. Communicate confidently and professionally with clients regarding completed work and ongoing tasks. Lead teams effectively, including mechanical crews and welding teams when assigned, acting as the main point of contact. Ensure all timesheets and administrative requirements are completed accurately and on time. Ensure every job is completed to the highest possible standard. Operational responsibilities and company requirements must take priority over personal extracurricular activities where reasonably required. Raise any underlying concerns, issues or operational matters with the Line Manager or Managing Director at the earliest opportunity. Complete clear, accurate and professional job reports for all relevant work undertaken. General Expectations The successful candidate is expected to demonstrate a professional attitude, strong work ethic, reliability and commitment to delivering high-quality mechanical work. They should take ownership of their responsibilities, communicate effectively with management, colleagues and clients, and work proactively to ensure jobs are completed safely, efficiently and to the highest possible standard.
21/09/2026
Full time
Artisan Recruitment are working with an established marine engineering company to recruit an experienced Mechanical Engineer / Lead / Foreman to join their team. This is an excellent opportunity for a skilled marine engineering professional looking for a hands-on role with responsibility for leading mechanical operations, supporting teams on site, and delivering high-quality work for clients. Key Responsibilities Lead and manage all mechanical operations under the direction of the Line Manager. Maintain a 24/7 response mindset when a client calls, respond promptly and professionally. Keep your mobile phone available at all reasonable times for operational requirements. Work overtime as required, including weekdays and weekends. Apply strong problem-solving skills and provide clear, practical solutions. Plan ahead for each job by identifying requirements, ordering materials where authorised, and keeping the Line Manager fully informed. Represent the mechanical department professionally and maintain a high standard of customer service at all times. Maintain a clean, organised and safe workshop environment. Support welding tasks and assist other departments when required. Act as the Line Manager s right-hand support for all mechanical operations. Consistently go above and beyond in carrying out your duties and responsibilities. Communicate confidently and professionally with clients regarding completed work and ongoing tasks. Lead teams effectively, including mechanical crews and welding teams when assigned, acting as the main point of contact. Ensure all timesheets and administrative requirements are completed accurately and on time. Ensure every job is completed to the highest possible standard. Operational responsibilities and company requirements must take priority over personal extracurricular activities where reasonably required. Raise any underlying concerns, issues or operational matters with the Line Manager or Managing Director at the earliest opportunity. Complete clear, accurate and professional job reports for all relevant work undertaken. General Expectations The successful candidate is expected to demonstrate a professional attitude, strong work ethic, reliability and commitment to delivering high-quality mechanical work. They should take ownership of their responsibilities, communicate effectively with management, colleagues and clients, and work proactively to ensure jobs are completed safely, efficiently and to the highest possible standard.
Associate Mechanical or Electrical Engineer London Hybrid Working Career Progression Future Leadership Opportunity We are looking for an ambitious Associate Mechanical or Electrical Engineer to join a growing London-based MEP consultancy. This is an exciting opportunity for an experienced Mechanical or Electrical building services engineer who is ready to take the next step in their career and play a key role in delivering projects, developing people and building strong client relationships. The consultancy works across a diverse range of sectors, including residential, education, commercial, industrial and warehouse/distribution projects . This is more than an engineering position. We're looking for someone who wants to grow with the business , take ownership of their career and ultimately become one of the company's future leaders. The Role As an Associate Mechanical or Electrical Engineer , you will be a senior member of the project team, taking responsibility for the successful delivery of projects while supporting and developing engineers around you. You will work closely with Directors, Operations Directors, clients, architects and other members of the design team, helping to deliver technically excellent solutions from project inception through to completion. The role offers significant scope for progression, with the opportunity to develop into a future Director or business leader as your experience and contribution to the business grows. Key Responsibilities Lead the delivery of Mechanical or Electrical engineering design across a range of projects. Take technical responsibility for projects from concept through to completion. Manage and mentor junior and intermediate engineers, helping them develop their technical and professional careers. Coordinate engineering designs with architects, structural engineers, contractors and other consultants. Attend client and design team meetings and act as a senior technical representative. Develop strong and lasting relationships with clients and project teams. Review drawings, specifications, calculations and technical reports. Ensure projects are delivered to the required technical, programme and quality standards. Provide technical guidance and support to project engineers. Assist with resource planning and project team management. Contribute to fee proposals, tenders and bids. Identify opportunities for additional work and support the development of existing client relationships. Support Directors and senior management with business development activities. Contribute to improving internal processes, technical standards and ways of working. Help promote the company's reputation for technical excellence and high-quality client service. The variety of projects means you will have the opportunity to broaden your experience while working on technically challenging and interesting schemes. Who We're Looking For We are looking for an experienced engineer who is ready to step into an Associate-level position and take on greater responsibility. You can come from either a Mechanical or Electrical engineering background . We are more interested in your technical ability, leadership potential, commercial awareness and attitude than simply your job title. Ideally, you will have: Strong experience within building services / MEP consultancy . A Mechanical or Electrical engineering background. Experience delivering building services projects from concept through to completion. Good technical knowledge and a strong understanding of engineering design. Experience working with multidisciplinary project teams. The confidence to communicate with clients and other senior stakeholders. Experience mentoring or managing junior engineers. Good commercial awareness. An interest in business development and developing client relationships. The ambition to progress into a senior leadership position. Chartered status or working towards Chartership would be advantageous, but is not essential. Your Future We're looking for people who want a career, not just another job . The Associate position is an important role within the business and is designed for someone who wants to increase their responsibility and influence over time. For the right individual, there is a genuine opportunity to progress towards Director level and future business leadership . As you develop your career and demonstrate your contribution to the continued success of the business, there may also be an opportunity to participate in the ownership of the business through shares/equity . We want our future leaders to be people who have grown with the business and have a genuine stake in its success. Benefits Competitive salary - reflective of your experience. Clear career progression towards senior leadership and Director level. Potential share/equity opportunity as part of your long-term career development. Private healthcare . Life insurance from day one . Hybrid working . Flexible working hours , including the option for an early start or early finish where appropriate. Generous holiday allowance. Professional development and support for continued career progression. Support for professional qualifications and continued learning. Opportunity to work on a diverse range of technically interesting projects. A collaborative working environment with experienced senior engineers and Directors. The opportunity to play a significant role in the continued growth of the business. Culture People are central to the success of the business. The culture is focused on developing people technically, professionally and commercially, while creating an environment where ideas and individual contributions are valued. As an Associate, you will be expected to take ownership and lead from the front If you are interested in applying for this position please feel free to send over your up to date CV to (url removed) Eden Brown is acting as an Employment Agency in relation to this vacancy.
21/09/2026
Full time
Associate Mechanical or Electrical Engineer London Hybrid Working Career Progression Future Leadership Opportunity We are looking for an ambitious Associate Mechanical or Electrical Engineer to join a growing London-based MEP consultancy. This is an exciting opportunity for an experienced Mechanical or Electrical building services engineer who is ready to take the next step in their career and play a key role in delivering projects, developing people and building strong client relationships. The consultancy works across a diverse range of sectors, including residential, education, commercial, industrial and warehouse/distribution projects . This is more than an engineering position. We're looking for someone who wants to grow with the business , take ownership of their career and ultimately become one of the company's future leaders. The Role As an Associate Mechanical or Electrical Engineer , you will be a senior member of the project team, taking responsibility for the successful delivery of projects while supporting and developing engineers around you. You will work closely with Directors, Operations Directors, clients, architects and other members of the design team, helping to deliver technically excellent solutions from project inception through to completion. The role offers significant scope for progression, with the opportunity to develop into a future Director or business leader as your experience and contribution to the business grows. Key Responsibilities Lead the delivery of Mechanical or Electrical engineering design across a range of projects. Take technical responsibility for projects from concept through to completion. Manage and mentor junior and intermediate engineers, helping them develop their technical and professional careers. Coordinate engineering designs with architects, structural engineers, contractors and other consultants. Attend client and design team meetings and act as a senior technical representative. Develop strong and lasting relationships with clients and project teams. Review drawings, specifications, calculations and technical reports. Ensure projects are delivered to the required technical, programme and quality standards. Provide technical guidance and support to project engineers. Assist with resource planning and project team management. Contribute to fee proposals, tenders and bids. Identify opportunities for additional work and support the development of existing client relationships. Support Directors and senior management with business development activities. Contribute to improving internal processes, technical standards and ways of working. Help promote the company's reputation for technical excellence and high-quality client service. The variety of projects means you will have the opportunity to broaden your experience while working on technically challenging and interesting schemes. Who We're Looking For We are looking for an experienced engineer who is ready to step into an Associate-level position and take on greater responsibility. You can come from either a Mechanical or Electrical engineering background . We are more interested in your technical ability, leadership potential, commercial awareness and attitude than simply your job title. Ideally, you will have: Strong experience within building services / MEP consultancy . A Mechanical or Electrical engineering background. Experience delivering building services projects from concept through to completion. Good technical knowledge and a strong understanding of engineering design. Experience working with multidisciplinary project teams. The confidence to communicate with clients and other senior stakeholders. Experience mentoring or managing junior engineers. Good commercial awareness. An interest in business development and developing client relationships. The ambition to progress into a senior leadership position. Chartered status or working towards Chartership would be advantageous, but is not essential. Your Future We're looking for people who want a career, not just another job . The Associate position is an important role within the business and is designed for someone who wants to increase their responsibility and influence over time. For the right individual, there is a genuine opportunity to progress towards Director level and future business leadership . As you develop your career and demonstrate your contribution to the continued success of the business, there may also be an opportunity to participate in the ownership of the business through shares/equity . We want our future leaders to be people who have grown with the business and have a genuine stake in its success. Benefits Competitive salary - reflective of your experience. Clear career progression towards senior leadership and Director level. Potential share/equity opportunity as part of your long-term career development. Private healthcare . Life insurance from day one . Hybrid working . Flexible working hours , including the option for an early start or early finish where appropriate. Generous holiday allowance. Professional development and support for continued career progression. Support for professional qualifications and continued learning. Opportunity to work on a diverse range of technically interesting projects. A collaborative working environment with experienced senior engineers and Directors. The opportunity to play a significant role in the continued growth of the business. Culture People are central to the success of the business. The culture is focused on developing people technically, professionally and commercially, while creating an environment where ideas and individual contributions are valued. As an Associate, you will be expected to take ownership and lead from the front If you are interested in applying for this position please feel free to send over your up to date CV to (url removed) Eden Brown is acting as an Employment Agency in relation to this vacancy.
Site Manager - Birmingham Project: Refurbishment and upgrade works to a retail goods lift within a live shopping centre Location: Birmingham, West Midlands Duration: 2.5 Weeks Job Type: Freelance / Contract Reporting into: Project Manager What We're Looking For Relevant Qualifications: SMSTS - essential First Aid - essential Valid CSCS - essential Asbestos Awareness - essential Experience: Extensive construction industry experience with at least 5 years working as a Site Manager Proven track record delivering lift refurbishment, M&E upgrade, commercial refurbishment or live environment projects Strong understanding of mechanical and electrical installations, health & safety requirements, permit-to-work systems and quality control procedures within live retail or commercial environments Key Skills: Superb negotiation abilities Competent IT / software skills Extensive Health and Safety knowledge Effective communication skills, verbal and written Ability to organise and manage project schedules Proven ability to lead, support, and direct a team effectively A solid understanding of relevant regulations and standards In-depth understanding of construction methods, materials, and building processes Exceptional focus on detail to ensure adherence to quality standards and specifications About the Company Our client is a well-established building services contractor with a strong reputation for delivering high-quality electrical, mechanical and specialist installation projects across the commercial, retail, industrial and public sectors. Renowned for their commitment to safety, quality and client satisfaction, they have a proven track record of successfully delivering refurbishment, upgrade and maintenance works within live operational environments. Their collaborative approach, technical expertise and focus on service delivery have enabled them to build long-standing relationships with clients and secure repeat business across a diverse project portfolio. The Opportunity We are seeking an experienced Site Manager to oversee the delivery of refurbishment works to a retail goods lift within a live shopping centre. You will be responsible for coordinating subcontractors, managing day-to-day site operations, ensuring compliance with health and safety procedures, and maintaining programme and quality standards throughout the project. Previous experience delivering lift refurbishment, M&E upgrade or commercial refurbishment projects within occupied or live operational environments is highly desirable. Key Responsibilities Attend and contribute to site progress meetings Provide regular progress updates to the Project Manager Maintain site records, permits and project documentation Conduct site inductions, toolbox talks and daily safety briefings Coordinate daily site activities, subcontractors and specialist trades Monitor programme and resolve site issues to maintain project progress Coordinate materials, plant and labour to ensure efficient delivery of works Liaise with the client, shopping centre management and other key stakeholders Oversee testing, commissioning and completion of the lift refurbishment works Manage inspections and promptly address any identified defects or compliance issues Monitor quality standards and ensure works are completed in accordance with specifications Ensure compliance with Health & Safety requirements, permits and asbestos-related procedures Contact Details: Niall Spink - Recruitment Consultant T: (phone number removed)
21/09/2026
Contract
Site Manager - Birmingham Project: Refurbishment and upgrade works to a retail goods lift within a live shopping centre Location: Birmingham, West Midlands Duration: 2.5 Weeks Job Type: Freelance / Contract Reporting into: Project Manager What We're Looking For Relevant Qualifications: SMSTS - essential First Aid - essential Valid CSCS - essential Asbestos Awareness - essential Experience: Extensive construction industry experience with at least 5 years working as a Site Manager Proven track record delivering lift refurbishment, M&E upgrade, commercial refurbishment or live environment projects Strong understanding of mechanical and electrical installations, health & safety requirements, permit-to-work systems and quality control procedures within live retail or commercial environments Key Skills: Superb negotiation abilities Competent IT / software skills Extensive Health and Safety knowledge Effective communication skills, verbal and written Ability to organise and manage project schedules Proven ability to lead, support, and direct a team effectively A solid understanding of relevant regulations and standards In-depth understanding of construction methods, materials, and building processes Exceptional focus on detail to ensure adherence to quality standards and specifications About the Company Our client is a well-established building services contractor with a strong reputation for delivering high-quality electrical, mechanical and specialist installation projects across the commercial, retail, industrial and public sectors. Renowned for their commitment to safety, quality and client satisfaction, they have a proven track record of successfully delivering refurbishment, upgrade and maintenance works within live operational environments. Their collaborative approach, technical expertise and focus on service delivery have enabled them to build long-standing relationships with clients and secure repeat business across a diverse project portfolio. The Opportunity We are seeking an experienced Site Manager to oversee the delivery of refurbishment works to a retail goods lift within a live shopping centre. You will be responsible for coordinating subcontractors, managing day-to-day site operations, ensuring compliance with health and safety procedures, and maintaining programme and quality standards throughout the project. Previous experience delivering lift refurbishment, M&E upgrade or commercial refurbishment projects within occupied or live operational environments is highly desirable. Key Responsibilities Attend and contribute to site progress meetings Provide regular progress updates to the Project Manager Maintain site records, permits and project documentation Conduct site inductions, toolbox talks and daily safety briefings Coordinate daily site activities, subcontractors and specialist trades Monitor programme and resolve site issues to maintain project progress Coordinate materials, plant and labour to ensure efficient delivery of works Liaise with the client, shopping centre management and other key stakeholders Oversee testing, commissioning and completion of the lift refurbishment works Manage inspections and promptly address any identified defects or compliance issues Monitor quality standards and ensure works are completed in accordance with specifications Ensure compliance with Health & Safety requirements, permits and asbestos-related procedures Contact Details: Niall Spink - Recruitment Consultant T: (phone number removed)
We're looking for an experienced or highly motivated aspiring site manager wanting to take the next step into Project Management to lead the delivery of multiple civil engineering projects across water and wastewater sites. Working within our Specialist Projects team you'll be part of our very successful Repetitive Delivery Division. In this hands-on role, you'll take ownership from project inception through to completion shaping scopes of work, developing site documentation, coordinating multidisciplinary teams and ensuring seamless communication between the client, designers and operational teams. You'll oversee all aspects of construction delivery, ensuring every project is executed safely, efficiently, on programme and to the highest standard. A level of accountability for commercial performance and a strong focus on risk management, you'll drive delivery excellence while maintaining a zero-incident safety culture. About Browne At Browne, we are engineering with purpose. We're a leading UK contractor working in the water and civil engineering sectors, delivering projects that help improve everyday life. From building pipelines and upgrading pumping stations to maintaining reservoirs and drainage systems, we support cleaner water, stronger infrastructure and more reliable services for communities. We offer a wide range of career opportunities both on site and behind the scenes. Whether your skills are in engineering, project delivery, safety, sustainability, commercial, planning or business support, there's a place for you at Browne. We value different perspectives and experiences, and we're proud to be a Silver Award Investors in Diversity accredited employer. Our teams use smart technology and a hands-on approach to make sure every job is delivered safely and to a high standard. We support our clients through the full life of their assets, from construction and mechanical systems to long-term maintenance. Browne is part of Renew Holdings plc, a UK-based group of specialist engineering companies. What We're Looking For We're seeking someone who brings technical capability, leadership confidence and a proactive, solutions-driven approach. You'll thrive in a fast-paced environment, enjoy juggling multiple projects and be comfortable making decisions that keep work moving smoothly and safely. Experience & Knowledge: Proven experience as a Site Manager or aspiring Project Manager within civil engineering, utilities or infrastructure Background delivering water or wastewater projects Commercial awareness prioritising cost control during the delivery phases of works (allocation of labour, plant and materials). Solid understanding of CDM Regulations and construction H&S requirements Experience managing subcontractors and coordinating multidisciplinary teams Confident client-facing communicator able to build strong working relationships Skills & Attributes: Demonstrable planning and efficient execution of works. Strong leadership and team-coordination skills Ability to assess risks and implement effective mitigation strategies (be able to solve unforeseen problems in a live environment). Comfortable working in highway environments with external stakeholders and multiple delivery constraints. Proficient in project reporting tools and Excel-based cost trackers. Qualifications: Degree in Civil Engineering, Construction Management or similar (Desirable) Association of Project Managers or equivalent. (Desirable ) SMSTS and CSCS Full UK Driving Licence Temporary Works Coordinator (TWC) (Desirable: Professional membership such as ICE/CIOB/APM, AP qualification, NRSWA Supervisor) A61 Appointed Person (Desirable) Join us to lead impactful projects that support communities daily. If you're looking for ownership, challenge and a team that values safety and teamwork, this is the role for you. We'd love to hear from you. Browne is a Civil Engineering, MEICA and Utilities infrastructure business based in Southern England with revenues of £230m in 2025/26. It is a subsidiary of Renew Holdings plc, a leading UK Engineering Services business, performing a critical role in keeping the nation's infrastructure functioning efficiently and safely. The Group operates through independently branded subsidiaries across its chosen markets, delivering non-discretionary maintenance and renewal tasks through its highly skilled, directly employed workforce. Please note that we drug and alcohol test all new starters as part of their induction, whilst also carrying out a DBS check. Engineering with purpose
21/09/2026
Full time
We're looking for an experienced or highly motivated aspiring site manager wanting to take the next step into Project Management to lead the delivery of multiple civil engineering projects across water and wastewater sites. Working within our Specialist Projects team you'll be part of our very successful Repetitive Delivery Division. In this hands-on role, you'll take ownership from project inception through to completion shaping scopes of work, developing site documentation, coordinating multidisciplinary teams and ensuring seamless communication between the client, designers and operational teams. You'll oversee all aspects of construction delivery, ensuring every project is executed safely, efficiently, on programme and to the highest standard. A level of accountability for commercial performance and a strong focus on risk management, you'll drive delivery excellence while maintaining a zero-incident safety culture. About Browne At Browne, we are engineering with purpose. We're a leading UK contractor working in the water and civil engineering sectors, delivering projects that help improve everyday life. From building pipelines and upgrading pumping stations to maintaining reservoirs and drainage systems, we support cleaner water, stronger infrastructure and more reliable services for communities. We offer a wide range of career opportunities both on site and behind the scenes. Whether your skills are in engineering, project delivery, safety, sustainability, commercial, planning or business support, there's a place for you at Browne. We value different perspectives and experiences, and we're proud to be a Silver Award Investors in Diversity accredited employer. Our teams use smart technology and a hands-on approach to make sure every job is delivered safely and to a high standard. We support our clients through the full life of their assets, from construction and mechanical systems to long-term maintenance. Browne is part of Renew Holdings plc, a UK-based group of specialist engineering companies. What We're Looking For We're seeking someone who brings technical capability, leadership confidence and a proactive, solutions-driven approach. You'll thrive in a fast-paced environment, enjoy juggling multiple projects and be comfortable making decisions that keep work moving smoothly and safely. Experience & Knowledge: Proven experience as a Site Manager or aspiring Project Manager within civil engineering, utilities or infrastructure Background delivering water or wastewater projects Commercial awareness prioritising cost control during the delivery phases of works (allocation of labour, plant and materials). Solid understanding of CDM Regulations and construction H&S requirements Experience managing subcontractors and coordinating multidisciplinary teams Confident client-facing communicator able to build strong working relationships Skills & Attributes: Demonstrable planning and efficient execution of works. Strong leadership and team-coordination skills Ability to assess risks and implement effective mitigation strategies (be able to solve unforeseen problems in a live environment). Comfortable working in highway environments with external stakeholders and multiple delivery constraints. Proficient in project reporting tools and Excel-based cost trackers. Qualifications: Degree in Civil Engineering, Construction Management or similar (Desirable) Association of Project Managers or equivalent. (Desirable ) SMSTS and CSCS Full UK Driving Licence Temporary Works Coordinator (TWC) (Desirable: Professional membership such as ICE/CIOB/APM, AP qualification, NRSWA Supervisor) A61 Appointed Person (Desirable) Join us to lead impactful projects that support communities daily. If you're looking for ownership, challenge and a team that values safety and teamwork, this is the role for you. We'd love to hear from you. Browne is a Civil Engineering, MEICA and Utilities infrastructure business based in Southern England with revenues of £230m in 2025/26. It is a subsidiary of Renew Holdings plc, a leading UK Engineering Services business, performing a critical role in keeping the nation's infrastructure functioning efficiently and safely. The Group operates through independently branded subsidiaries across its chosen markets, delivering non-discretionary maintenance and renewal tasks through its highly skilled, directly employed workforce. Please note that we drug and alcohol test all new starters as part of their induction, whilst also carrying out a DBS check. Engineering with purpose
3D Personnel are currently looking for an 360 Operator for a construction project in Eastleigh. The day-to-day duties will consist of: Operate a 360 excavator safely and efficiently to carry out excavation, digging, loading, and material-moving duties. Conduct thorough pre-start and daily safety checks on the excavator before operation. Safely excavate trenches, foundations, footings, and other areas as instructed by the Site Management Team. Load and move materials such as soil, rubble, aggregates, and other site materials. Operate the excavator around obstacles, confined spaces, and busy construction sites. Work safely around other plant, machinery, vehicles, and site personnel. Carry out routine checks and report any defects or mechanical issues immediately. Follow all site rules, safety regulations, and operating procedures. Perform all required duties on site as instructed by the Site Management Team. Maintain a safe, clean, and professional working environment at all times. Carry out all work in accordance with industry health and safety standards. Requirements: Must hold a valid CPCS or NPORS ticket for 360 Excavator. Experience operating a 360 excavator on construction sites. Must be hardworking, reliable, and driven. Must have valid ID/Passport. Must have full PPE, including: Must have full site PPE Good understanding of site health and safety procedures. Ability to follow instructions and work effectively as part of a site team. Must have a strong focus on safety and responsible plant operation. If interested please apply below or call our office on (phone number removed). (url removed)> 3D Personnel Ltd are operating as an Employment Business in relation to this vacancy. 3D Personnel Ltd are a leading name in construction recruitment for the United Kingdom supplying Professional & Technical, Trades & Labour and construction Services talent across a broad range of construction sectors Our dedicated Resource Managers can guide you through the whole construction recruitment process and help you land that dream role in the British Construction Industry. Finding a suitable construction job for you is something 3D Personnel takes massive pride in. Other projects and progression will be available within 3D Personnel due to the ever-growing construction industry that is thriving in the United Kingdom. 3D Personnel is currently working on several large-scale projects in the United Kingdom, if the job above does not suit, please contact us for other potential construction job opportunities near you. For a full list of construction jobs, we currently have available please visit: (url removed)/job-search Benefits of working for 3D Personnel: Weekly Payroll Dedicated staff looking after you 3D Personnel act as an employment business To achieve the higher pay rate experience of working on a construction site is needed The pay rate quoted for this role is PAYE Umbrella which will see additional deductions to you take home hourly rate For certain job roles payment via CIS could be a pay option, but please be aware that not all job roles are eligible to be paid CIS
21/09/2026
Seasonal
3D Personnel are currently looking for an 360 Operator for a construction project in Eastleigh. The day-to-day duties will consist of: Operate a 360 excavator safely and efficiently to carry out excavation, digging, loading, and material-moving duties. Conduct thorough pre-start and daily safety checks on the excavator before operation. Safely excavate trenches, foundations, footings, and other areas as instructed by the Site Management Team. Load and move materials such as soil, rubble, aggregates, and other site materials. Operate the excavator around obstacles, confined spaces, and busy construction sites. Work safely around other plant, machinery, vehicles, and site personnel. Carry out routine checks and report any defects or mechanical issues immediately. Follow all site rules, safety regulations, and operating procedures. Perform all required duties on site as instructed by the Site Management Team. Maintain a safe, clean, and professional working environment at all times. Carry out all work in accordance with industry health and safety standards. Requirements: Must hold a valid CPCS or NPORS ticket for 360 Excavator. Experience operating a 360 excavator on construction sites. Must be hardworking, reliable, and driven. Must have valid ID/Passport. Must have full PPE, including: Must have full site PPE Good understanding of site health and safety procedures. Ability to follow instructions and work effectively as part of a site team. Must have a strong focus on safety and responsible plant operation. If interested please apply below or call our office on (phone number removed). (url removed)> 3D Personnel Ltd are operating as an Employment Business in relation to this vacancy. 3D Personnel Ltd are a leading name in construction recruitment for the United Kingdom supplying Professional & Technical, Trades & Labour and construction Services talent across a broad range of construction sectors Our dedicated Resource Managers can guide you through the whole construction recruitment process and help you land that dream role in the British Construction Industry. Finding a suitable construction job for you is something 3D Personnel takes massive pride in. Other projects and progression will be available within 3D Personnel due to the ever-growing construction industry that is thriving in the United Kingdom. 3D Personnel is currently working on several large-scale projects in the United Kingdom, if the job above does not suit, please contact us for other potential construction job opportunities near you. For a full list of construction jobs, we currently have available please visit: (url removed)/job-search Benefits of working for 3D Personnel: Weekly Payroll Dedicated staff looking after you 3D Personnel act as an employment business To achieve the higher pay rate experience of working on a construction site is needed The pay rate quoted for this role is PAYE Umbrella which will see additional deductions to you take home hourly rate For certain job roles payment via CIS could be a pay option, but please be aware that not all job roles are eligible to be paid CIS
Location: North Acton, West London Sector: Major Infrastructure / M&E Start: Immediate Employment Type: Permanent An experienced Mechanical Construction Manager is required to oversee mechanical works associated with a major shaft and infrastructure project in West London. This is a site-focused delivery position requiring a strong Mechanical Construction Manager who is comfortable operating within a complex, safety-critical construction environment. Key Responsibilities Manage mechanical installation activities within the shaft and associated areas. Coordinate mechanical subcontractors, supervisors and site labour. Plan and sequence works in line with the overall construction programme. Review drawings, specifications, RAMS and installation requirements. Coordinate mechanical installations with structural, civil and electrical works. Manage site logistics and access requirements associated with mechanical installations. Monitor quality and ensure works meet project specifications. Carry out inspections and manage snagging and remedial works. Coordinate testing and commissioning activities. Attend daily coordination and project progress meetings. Maintain accurate site records and progress reporting. Ensure all works are undertaken in accordance with project health & safety procedures. Requirements Candidate Requirements Previous Mechanical Construction Manager / Mechanical Site Manager experience. Strong mechanical installation and construction knowledge. Experience working on large, complex or heavily coordinated construction projects. Strong understanding of safe systems of work and construction site procedures. Ability to manage subcontractors and drive programme on site. Confident interpreting drawings, specifications and technical information. Good communication and coordination skills. Experience with shafts, tunnels, rail, infrastructure or other restricted-access environments would be particularly beneficial. This is an immediate requirement and would suit a hands-on Mechanical Construction Manager accustomed to technically challenging site environments. Benefits Competitive salaries Enhanced annual leave Hybrid working Generous pension schemes Private healthcare Life assurance Enhanced maternity leave Travel support Mental Health Support Wellbeing Resources
21/09/2026
Full time
Location: North Acton, West London Sector: Major Infrastructure / M&E Start: Immediate Employment Type: Permanent An experienced Mechanical Construction Manager is required to oversee mechanical works associated with a major shaft and infrastructure project in West London. This is a site-focused delivery position requiring a strong Mechanical Construction Manager who is comfortable operating within a complex, safety-critical construction environment. Key Responsibilities Manage mechanical installation activities within the shaft and associated areas. Coordinate mechanical subcontractors, supervisors and site labour. Plan and sequence works in line with the overall construction programme. Review drawings, specifications, RAMS and installation requirements. Coordinate mechanical installations with structural, civil and electrical works. Manage site logistics and access requirements associated with mechanical installations. Monitor quality and ensure works meet project specifications. Carry out inspections and manage snagging and remedial works. Coordinate testing and commissioning activities. Attend daily coordination and project progress meetings. Maintain accurate site records and progress reporting. Ensure all works are undertaken in accordance with project health & safety procedures. Requirements Candidate Requirements Previous Mechanical Construction Manager / Mechanical Site Manager experience. Strong mechanical installation and construction knowledge. Experience working on large, complex or heavily coordinated construction projects. Strong understanding of safe systems of work and construction site procedures. Ability to manage subcontractors and drive programme on site. Confident interpreting drawings, specifications and technical information. Good communication and coordination skills. Experience with shafts, tunnels, rail, infrastructure or other restricted-access environments would be particularly beneficial. This is an immediate requirement and would suit a hands-on Mechanical Construction Manager accustomed to technically challenging site environments. Benefits Competitive salaries Enhanced annual leave Hybrid working Generous pension schemes Private healthcare Life assurance Enhanced maternity leave Travel support Mental Health Support Wellbeing Resources
Hybrid Mechanical Estimator required. We are currenlty looking for an experienced Mechanical Estimator for a established mechanical and electrical contractor in London. This is an exellent opportunities to work on a range of commercial fit-out and refurbishment projects across London. The successful Mechanical Estimator will be responsible for managing tenders from initial enquiry through to final submission, producing accurate and commercially competitive estimates for mechanical building-services packages. The role will cover projects including high-quality office fit-outs, retail and commercial refurbishments. Mechanical packages will typically include HVAC, ventilation, air conditioning, pipe work and plumbing. Key responsibilities: Reviewing drawings, specifications and tender documentation Producing detailed mechanical estimates and cost plans Completing accurate material and labour take-offs Obtaining and analysing supplier and subcontractor quotations Preparing tender submissions and pricing schedules Identifying value-engineering opportunities Attending tender interviews, site visits and client meetings Liaising with project managers, directors and commercial teams Managing multiple tenders and meeting submission deadlines Supporting projects through pre-construction and handover The ideal candidate will have previous experience working as a Mechanical Estimator within the commercial fit-out, refurbishment or mechanical building-services sector. You should be confident pricing mechanical packages independently and have a strong understanding of current labour, plant and material costs. Requirements: Previous mechanical estimating experience Good supplier and subcontractor relationships Strong commercial awareness and attention to detail Excellent communication and organisational skills The companies offer flexible hybrid working, with the opportunity to work from home three days per week. You will also benefit from a strong pipeline of upcoming projects, a supportive senior management team and genuine opportunities for long-term career progression. Please apply or contact Brookfield M&E to discuss
21/09/2026
Full time
Hybrid Mechanical Estimator required. We are currenlty looking for an experienced Mechanical Estimator for a established mechanical and electrical contractor in London. This is an exellent opportunities to work on a range of commercial fit-out and refurbishment projects across London. The successful Mechanical Estimator will be responsible for managing tenders from initial enquiry through to final submission, producing accurate and commercially competitive estimates for mechanical building-services packages. The role will cover projects including high-quality office fit-outs, retail and commercial refurbishments. Mechanical packages will typically include HVAC, ventilation, air conditioning, pipe work and plumbing. Key responsibilities: Reviewing drawings, specifications and tender documentation Producing detailed mechanical estimates and cost plans Completing accurate material and labour take-offs Obtaining and analysing supplier and subcontractor quotations Preparing tender submissions and pricing schedules Identifying value-engineering opportunities Attending tender interviews, site visits and client meetings Liaising with project managers, directors and commercial teams Managing multiple tenders and meeting submission deadlines Supporting projects through pre-construction and handover The ideal candidate will have previous experience working as a Mechanical Estimator within the commercial fit-out, refurbishment or mechanical building-services sector. You should be confident pricing mechanical packages independently and have a strong understanding of current labour, plant and material costs. Requirements: Previous mechanical estimating experience Good supplier and subcontractor relationships Strong commercial awareness and attention to detail Excellent communication and organisational skills The companies offer flexible hybrid working, with the opportunity to work from home three days per week. You will also benefit from a strong pipeline of upcoming projects, a supportive senior management team and genuine opportunities for long-term career progression. Please apply or contact Brookfield M&E to discuss
Assistant Mechanical Estimator Enfield £35,000 - £45,000 + Training, Development & Career Progression A fantastic opportunity has arisen for an ambitious Assistant Mechanical Estimator to join a well-established and growing building services contractor. Working closely with an experienced estimating team, you'll receive hands-on training and mentorship, giving you the opportunity to develop your technical knowledge and build a long-term career within the business. This role would suit someone with 1-2 years' experience in mechanical estimating who is looking to take the next step and join a company that genuinely invests in its people. With a strong project pipeline, excellent staff retention and clear progression opportunities, this is an ideal environment to continue your professional development. Following a successful probation period, hybrid working is available with one day per week working from home. The Role Assisting with the preparation of mechanical estimates and tender submissions Reviewing drawings, specifications and tender documentation Obtaining and analysing supplier and subcontractor quotations Supporting senior estimators with cost planning and bid preparation Attending internal tender review meetings Assisting with value engineering and cost-saving exercises Maintaining accurate estimating records and databases Liaising with project, commercial and pre-construction teams throughout the tender process You'll Also Have 1-2 years' experience within a Mechanical Estimating role Experience working on mechanical building services or construction projects A basic understanding of HVAC, pipework, public health and mechanical installations Strong numerical and analytical skills Excellent attention to detail and organisational abilities Proficiency with Microsoft Excel and estimating software Strong communication skills and a willingness to learn The ability to work collaboratively within a team environment A full UK driving licence would be advantageous What's On Offer Structured training and ongoing development Mentorship from a highly experienced estimating team Clear career progression opportunities Hybrid working available following probation (1 day per week from home) Long-term stable career within a growing business Exposure to a wide variety of mechanical building services projects Supportive and collaborative working environment This is an excellent opportunity for an Assistant Mechanical Estimator looking to develop their career within a successful and expanding building services contractor where training, progression and long-term career prospects are readily available. Call Emily on (phone number removed) and click to apply!
21/09/2026
Full time
Assistant Mechanical Estimator Enfield £35,000 - £45,000 + Training, Development & Career Progression A fantastic opportunity has arisen for an ambitious Assistant Mechanical Estimator to join a well-established and growing building services contractor. Working closely with an experienced estimating team, you'll receive hands-on training and mentorship, giving you the opportunity to develop your technical knowledge and build a long-term career within the business. This role would suit someone with 1-2 years' experience in mechanical estimating who is looking to take the next step and join a company that genuinely invests in its people. With a strong project pipeline, excellent staff retention and clear progression opportunities, this is an ideal environment to continue your professional development. Following a successful probation period, hybrid working is available with one day per week working from home. The Role Assisting with the preparation of mechanical estimates and tender submissions Reviewing drawings, specifications and tender documentation Obtaining and analysing supplier and subcontractor quotations Supporting senior estimators with cost planning and bid preparation Attending internal tender review meetings Assisting with value engineering and cost-saving exercises Maintaining accurate estimating records and databases Liaising with project, commercial and pre-construction teams throughout the tender process You'll Also Have 1-2 years' experience within a Mechanical Estimating role Experience working on mechanical building services or construction projects A basic understanding of HVAC, pipework, public health and mechanical installations Strong numerical and analytical skills Excellent attention to detail and organisational abilities Proficiency with Microsoft Excel and estimating software Strong communication skills and a willingness to learn The ability to work collaboratively within a team environment A full UK driving licence would be advantageous What's On Offer Structured training and ongoing development Mentorship from a highly experienced estimating team Clear career progression opportunities Hybrid working available following probation (1 day per week from home) Long-term stable career within a growing business Exposure to a wide variety of mechanical building services projects Supportive and collaborative working environment This is an excellent opportunity for an Assistant Mechanical Estimator looking to develop their career within a successful and expanding building services contractor where training, progression and long-term career prospects are readily available. Call Emily on (phone number removed) and click to apply!
Mechanical Supervisor Keighley, West Yorkshire Contract 1st Step Solutions are supporting a National M&E Contractor who are looking for a Mechanical Supervisor to join their team on a project in Keighley. We are seeking Supervisors who have prior steam installation experience having worked directly for a Tier 1 M&E Contractors. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - First Aid at Work. - Good literacy skills. - Previous experience in a Supervisory/Management role. - Capable of driving a project.
21/09/2026
Contract
Mechanical Supervisor Keighley, West Yorkshire Contract 1st Step Solutions are supporting a National M&E Contractor who are looking for a Mechanical Supervisor to join their team on a project in Keighley. We are seeking Supervisors who have prior steam installation experience having worked directly for a Tier 1 M&E Contractors. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - First Aid at Work. - Good literacy skills. - Previous experience in a Supervisory/Management role. - Capable of driving a project.
Senior MEP Project Manager - Healthcare Central London Up to 95,000- 100,000 + Excellent Package We are currently working with a highly established Building Services / MEP contractor that has a strong and growing presence across the UK healthcare sector. The business is currently delivering a number of major healthcare schemes across Central London , with several live projects operating in the region, each with an MEP value of approximately 30m . Due to continued growth and a strong forward workload, they are looking to appoint an experienced Senior Project Manager to join their team. This is a fantastic opportunity for a mechanically biased Senior Project Manager who has a strong understanding of Electrical Services and wants to take the next step in their career with a business that genuinely invests in its people. The Role As Senior Project Manager, you will take a senior leadership position within one of the company's major healthcare schemes in Central London. You will report directly into the Project Director , working closely alongside the Electrical Senior Project Manager to ensure the successful delivery of the project from a technical, commercial and operational perspective. Your responsibilities will include: Leading the Mechanical delivery of a major healthcare project. Working closely with the Project Director and Electrical Senior Project Manager. Managing project teams, subcontractors and key stakeholders. Providing strong leadership across the MEP delivery function. Ensuring projects are delivered safely, on programme and to the required quality standards. Managing client relationships and working closely with the wider project team. Overseeing technical, commercial and programme performance. Supporting the development and progression of project teams. Driving standards and continuous improvement across project delivery. What We're Looking For Healthcare experience is essential for this position. We're particularly interested in Senior Project Managers who have: A strong Mechanical Building Services background. Proven experience delivering large-scale healthcare projects. Good working knowledge of Electrical Building Services. Experience managing complex MEP projects and sizeable project teams. Strong client-facing and stakeholder management skills. The ability to operate at Senior PM level while still being hands-on when required. A genuine desire to progress their career within the business. A track record demonstrating stability, commitment and longevity with previous employers. This isn't an opportunity for someone simply looking for their next project. The business is looking for someone with drive and ambition , who wants to build a long-term career and ultimately progress towards Project Director and potentially Operations Director level. The Business The company has built an excellent reputation within the Building Services sector and has developed a particularly strong position within healthcare and other technically complex environments . They currently have five live projects across Central London , with each project carrying an MEP value of around 30m, providing significant opportunity for future progression and continued career development. There is a clear structure for progression within the business, and they are keen to bring in people who want to grow with them rather than simply move between projects. Salary & Package Salary up to 95,000 Potential to reach 100,000 for the right individual One of the strongest overall packages currently available in the market Very strong bonus scheme Travel expenses paid Genuine long-term career progression Opportunity to progress towards Project Director / Operations Director If you're an experienced Senior Project Manager with a strong Mechanical and Healthcare background and are looking for a business where you can genuinely build a long-term career, this could be an excellent opportunity. For more information, or a confidential discussion about the position, please get in touch with Lewis Calder PSR London.
21/09/2026
Full time
Senior MEP Project Manager - Healthcare Central London Up to 95,000- 100,000 + Excellent Package We are currently working with a highly established Building Services / MEP contractor that has a strong and growing presence across the UK healthcare sector. The business is currently delivering a number of major healthcare schemes across Central London , with several live projects operating in the region, each with an MEP value of approximately 30m . Due to continued growth and a strong forward workload, they are looking to appoint an experienced Senior Project Manager to join their team. This is a fantastic opportunity for a mechanically biased Senior Project Manager who has a strong understanding of Electrical Services and wants to take the next step in their career with a business that genuinely invests in its people. The Role As Senior Project Manager, you will take a senior leadership position within one of the company's major healthcare schemes in Central London. You will report directly into the Project Director , working closely alongside the Electrical Senior Project Manager to ensure the successful delivery of the project from a technical, commercial and operational perspective. Your responsibilities will include: Leading the Mechanical delivery of a major healthcare project. Working closely with the Project Director and Electrical Senior Project Manager. Managing project teams, subcontractors and key stakeholders. Providing strong leadership across the MEP delivery function. Ensuring projects are delivered safely, on programme and to the required quality standards. Managing client relationships and working closely with the wider project team. Overseeing technical, commercial and programme performance. Supporting the development and progression of project teams. Driving standards and continuous improvement across project delivery. What We're Looking For Healthcare experience is essential for this position. We're particularly interested in Senior Project Managers who have: A strong Mechanical Building Services background. Proven experience delivering large-scale healthcare projects. Good working knowledge of Electrical Building Services. Experience managing complex MEP projects and sizeable project teams. Strong client-facing and stakeholder management skills. The ability to operate at Senior PM level while still being hands-on when required. A genuine desire to progress their career within the business. A track record demonstrating stability, commitment and longevity with previous employers. This isn't an opportunity for someone simply looking for their next project. The business is looking for someone with drive and ambition , who wants to build a long-term career and ultimately progress towards Project Director and potentially Operations Director level. The Business The company has built an excellent reputation within the Building Services sector and has developed a particularly strong position within healthcare and other technically complex environments . They currently have five live projects across Central London , with each project carrying an MEP value of around 30m, providing significant opportunity for future progression and continued career development. There is a clear structure for progression within the business, and they are keen to bring in people who want to grow with them rather than simply move between projects. Salary & Package Salary up to 95,000 Potential to reach 100,000 for the right individual One of the strongest overall packages currently available in the market Very strong bonus scheme Travel expenses paid Genuine long-term career progression Opportunity to progress towards Project Director / Operations Director If you're an experienced Senior Project Manager with a strong Mechanical and Healthcare background and are looking for a business where you can genuinely build a long-term career, this could be an excellent opportunity. For more information, or a confidential discussion about the position, please get in touch with Lewis Calder PSR London.
Michael Taylor Search & Selection
Slough, Berkshire
Client: A specialist engineering and construction support company delivering a range of technical and project-related services across commercial, industrial, and infrastructure sectors. The business works closely with clients, contractors, and project teams to provide practical, efficient, and quality-focused solutions that support the successful delivery of complex projects. With experience operating in fast-paced project environments, the company is recognised for its collaborative approach, attention to detail, and commitment to meeting programme, safety, and performance requirements while supporting projects from planning through to completion. Role: Mechanical Construction Manager - West London - £350-£400 per day As an experienced Mechanical Construction Manager, you will be responsible for workface planning, resource allocation and management, efficient materials and resource logistics, mitigating of project risks and ensuring that highest Quality and HSE standards are met at all times throughout the project cycle. You will collaborate closely with stakeholders, teams, and external partners to ensure project success while you will always uphold the company's values ensuring their reputation remains intact as a leading Engineering/Infrastructure project delivery business. KEY RESPONSIBILITIES: Health & Safety Lead Health and Safety as part of the SHELT3 forum and comply with all requirements of CDM, Company and client HSEQ requirements across allocated projects. Perform H&S duties as each contract requires. Be an ambassador for great Health & safety performance and make sure that all under your control go home safely to their loved ones each and every day. Project Set Up Contribute to the validation of the project as agreed in the project kick-off meeting. Lead the planning and execution of the installation, commissioning, and handover of the project. Must have a detailed understanding of the project scope, objectives, timelines, and deliverables in collaboration with other project and client stakeholders. Contribute to the production of the Construction Programme and collaborate with Planner to update programme. Develop detailed project construction plans using all agreed aspects of the Company Project Delivery System (EPDS) with productivity and efficiency in mind on everything that we do. Review designs and drawings in good time to make sure that Company drawings give the site team the opportunity to install right first time, are error free and consider efficient working practices. Project Delivery Co-ordinate all works on site through supervision, sub-contractors and other project stakeholders, ensure that all materials, plant, equipment, and tools are in the right place at the right time. This includes liaison with any Subcontractors in their equivalent plans. Ensure that HSEQ standard are exceeded at all times, set the project up to achieve exemplar visual standards and then make sure that all RAMS, Permits, ITP s and any client specific requirements are met. It is your job to ensure that our Site Supervisors are aligned with your goals in their responsibilities and accountability. Deliver to the required project commercial outcome Gross Margin, effectively managing change control and ability to maintain commercial entitlement for both time and cost. Maintain contemporaneous records as defined by the form of contract and also as set out in the Commercial Golden Rules from the project validation. Reporting Prepare contribution to the weekly and monthly progress reports as set out by the Project Manager. Review all shift reports from previous night/day and confirm when Document Controller can upload. Record progress against construction programme with the planner and attend weekly progress/planning meetings. Client Relationships Maintain effective proactive client communication and be an ambassador for the Company with clients, potential clients, and all stakeholders. Business Interface Collaborate with key business and support functions to support sector delivery. Strategise, develop, and maintain the sector supply chain with Procurement. Share best practices and support the Project Manager with identifying risks and opportunities, proactively identify solutions and mitigation strategies. Escalate only where necessary, with clear rationale and proposed actions. Share best practices and lessons learnt. THE IDEAL CANDIDATE: Progressed from a tools background and have good technical knowledge of mechanical services. Experience working in the commercial / infrastructure sector. Experience managing projects to a minimum of £2M within your own discipline. A minimum 5 years experience in a management role. IN RETURN THEY OFFER: A healthy pipeline of work they have secured the majority of their turnover for next year. Join a stable business who have an excellent staff attrition rate.
21/09/2026
Contract
Client: A specialist engineering and construction support company delivering a range of technical and project-related services across commercial, industrial, and infrastructure sectors. The business works closely with clients, contractors, and project teams to provide practical, efficient, and quality-focused solutions that support the successful delivery of complex projects. With experience operating in fast-paced project environments, the company is recognised for its collaborative approach, attention to detail, and commitment to meeting programme, safety, and performance requirements while supporting projects from planning through to completion. Role: Mechanical Construction Manager - West London - £350-£400 per day As an experienced Mechanical Construction Manager, you will be responsible for workface planning, resource allocation and management, efficient materials and resource logistics, mitigating of project risks and ensuring that highest Quality and HSE standards are met at all times throughout the project cycle. You will collaborate closely with stakeholders, teams, and external partners to ensure project success while you will always uphold the company's values ensuring their reputation remains intact as a leading Engineering/Infrastructure project delivery business. KEY RESPONSIBILITIES: Health & Safety Lead Health and Safety as part of the SHELT3 forum and comply with all requirements of CDM, Company and client HSEQ requirements across allocated projects. Perform H&S duties as each contract requires. Be an ambassador for great Health & safety performance and make sure that all under your control go home safely to their loved ones each and every day. Project Set Up Contribute to the validation of the project as agreed in the project kick-off meeting. Lead the planning and execution of the installation, commissioning, and handover of the project. Must have a detailed understanding of the project scope, objectives, timelines, and deliverables in collaboration with other project and client stakeholders. Contribute to the production of the Construction Programme and collaborate with Planner to update programme. Develop detailed project construction plans using all agreed aspects of the Company Project Delivery System (EPDS) with productivity and efficiency in mind on everything that we do. Review designs and drawings in good time to make sure that Company drawings give the site team the opportunity to install right first time, are error free and consider efficient working practices. Project Delivery Co-ordinate all works on site through supervision, sub-contractors and other project stakeholders, ensure that all materials, plant, equipment, and tools are in the right place at the right time. This includes liaison with any Subcontractors in their equivalent plans. Ensure that HSEQ standard are exceeded at all times, set the project up to achieve exemplar visual standards and then make sure that all RAMS, Permits, ITP s and any client specific requirements are met. It is your job to ensure that our Site Supervisors are aligned with your goals in their responsibilities and accountability. Deliver to the required project commercial outcome Gross Margin, effectively managing change control and ability to maintain commercial entitlement for both time and cost. Maintain contemporaneous records as defined by the form of contract and also as set out in the Commercial Golden Rules from the project validation. Reporting Prepare contribution to the weekly and monthly progress reports as set out by the Project Manager. Review all shift reports from previous night/day and confirm when Document Controller can upload. Record progress against construction programme with the planner and attend weekly progress/planning meetings. Client Relationships Maintain effective proactive client communication and be an ambassador for the Company with clients, potential clients, and all stakeholders. Business Interface Collaborate with key business and support functions to support sector delivery. Strategise, develop, and maintain the sector supply chain with Procurement. Share best practices and support the Project Manager with identifying risks and opportunities, proactively identify solutions and mitigation strategies. Escalate only where necessary, with clear rationale and proposed actions. Share best practices and lessons learnt. THE IDEAL CANDIDATE: Progressed from a tools background and have good technical knowledge of mechanical services. Experience working in the commercial / infrastructure sector. Experience managing projects to a minimum of £2M within your own discipline. A minimum 5 years experience in a management role. IN RETURN THEY OFFER: A healthy pipeline of work they have secured the majority of their turnover for next year. Join a stable business who have an excellent staff attrition rate.
The client is a leading development and construction company they provide comprehensive Facilities Management services, including mechanical and electrical engineering support, cleaning, catering, and grounds maintenance. They are looking for a Premises Assistant to join one of our Schools in Bristol. The role ensures Building Services operational delivery performance aligns with contract obligations and business processes, delivering services with high customer satisfaction and ensuring compliance. What you'll do: Manage Premises Assistance in providing all related services within the school location. Work with Lead engineers to ensure both reactive and PPM works are completed within the specified timeframe. Comply with all statutory and regulatory requirements, including Health and Safety legislation and safe systems of work. Ensure all planned and reactive maintenance is carried out as determined by the contract PPM plan, SLA's, KPI's, and line manager. Manage and oversee the delivery and control of materials and stock to ensure budgets are maintained while having sufficient stock of parts and materials to minimize potential for unavailability or service performance deductions. What you'll bring to the role: Experience in FM service delivery Sound knowledge of H&S Legislation and COSHH ISOH Managing Safely Experience in building maintenance systems
21/09/2026
Full time
The client is a leading development and construction company they provide comprehensive Facilities Management services, including mechanical and electrical engineering support, cleaning, catering, and grounds maintenance. They are looking for a Premises Assistant to join one of our Schools in Bristol. The role ensures Building Services operational delivery performance aligns with contract obligations and business processes, delivering services with high customer satisfaction and ensuring compliance. What you'll do: Manage Premises Assistance in providing all related services within the school location. Work with Lead engineers to ensure both reactive and PPM works are completed within the specified timeframe. Comply with all statutory and regulatory requirements, including Health and Safety legislation and safe systems of work. Ensure all planned and reactive maintenance is carried out as determined by the contract PPM plan, SLA's, KPI's, and line manager. Manage and oversee the delivery and control of materials and stock to ensure budgets are maintained while having sufficient stock of parts and materials to minimize potential for unavailability or service performance deductions. What you'll bring to the role: Experience in FM service delivery Sound knowledge of H&S Legislation and COSHH ISOH Managing Safely Experience in building maintenance systems
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or innovative tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities Proactive and preventative maintenance tasks on a wide range of site equipment Carry out reactive repairs and fault diagnosis in a live distribution warehouse Use the latest tools to maximise equipment effectiveness Uphold all health and safety policies and practices Support the development and progression of on-site apprentices Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or innovative tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - A full Engineering indentured Apprenticeship and/or qualified to a minimum of NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience leading engineering teams as a mentor or tech lead - Preferred qualifications are not required to apply for a position at Amazon. If you have all the basic qualifications above, we'd love to hear from you. - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline, operations, or business administration Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks - A full Engineering indentured Apprenticeship and/or qualified to a minimum of NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience leading engineering teams as a mentor or tech lead - Preferred qualifications are not required to apply for a position at Amazon. If you have all the basic qualifications above, we'd love to hear from you. - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline, operations, or business administration Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - High school or equivalent diploma - Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. You'll respond promptly to breakdowns, investigation, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon delivery at speed. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. You'll respond promptly to breakdowns, investigation, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon delivery at speed. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in electrical or mechanical engineering, or experience in facilities management - Experience in oral and written communication - Relevant experience as a qualified engineer PREFERRED QUALIFICATIONS - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience with predictive and preventative maintenance, repair, troubleshooting, and diagnostics on material handling equipment (MHE) and automated conveyor systems - Experience in condition-based monitoring - Experience working with print and apply machines Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in electrical or mechanical engineering, or experience in facilities management - Experience in oral and written communication - Relevant experience as a qualified engineer PREFERRED QUALIFICATIONS - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience with predictive and preventative maintenance, repair, troubleshooting, and diagnostics on material handling equipment (MHE) and automated conveyor systems - Experience in condition-based monitoring - Experience working with print and apply machines Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Amazon Logistics, or AMZL, handles 'last mile' delivery duties in partnership with third-party distribution businesses. We utilise creative thinking and continuous improvement initiatives to get millions of physical products into the hands of our customers. Our goal is to make our customers' delivery experience as smooth as possible and roll out global delivery solutions for our newest concepts, like Amazon Fresh, Prime Now and Amazon Restaurants. There are two sides to what we do. Our 'under the roof' associates process millions of products for dispatch to our delivery teams. Our team is people-focused and supportive, particularly as lots of our people work through the night. We focus mostly on operations, with 24/7 shifts in most of our locations. Meanwhile, our 'on the road' people work with Amazon Flex - a network of delivery contractors. Every year, we continually raise the bar for customer experience with new, innovative delivery services. We look for new ways to overcome industry wide logistics challenges and new ideas to reduce our carbon footprint, supported by a portfolio of cutting-edge vehicles (including Electric Vehicles) and technology to help us do just that. BASIC QUALIFICATIONS - High school or equivalent diploma - high school diploma or equivalent - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Work flexible schedules including weekends, nights, and holidays - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in English-language communication skills, both written and verbal PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Amazon Logistics, or AMZL, handles 'last mile' delivery duties in partnership with third-party distribution businesses. We utilise creative thinking and continuous improvement initiatives to get millions of physical products into the hands of our customers. Our goal is to make our customers' delivery experience as smooth as possible and roll out global delivery solutions for our newest concepts, like Amazon Fresh, Prime Now and Amazon Restaurants. There are two sides to what we do. Our 'under the roof' associates process millions of products for dispatch to our delivery teams. Our team is people-focused and supportive, particularly as lots of our people work through the night. We focus mostly on operations, with 24/7 shifts in most of our locations. Meanwhile, our 'on the road' people work with Amazon Flex - a network of delivery contractors. Every year, we continually raise the bar for customer experience with new, innovative delivery services. We look for new ways to overcome industry wide logistics challenges and new ideas to reduce our carbon footprint, supported by a portfolio of cutting-edge vehicles (including Electric Vehicles) and technology to help us do just that. BASIC QUALIFICATIONS - High school or equivalent diploma - high school diploma or equivalent - NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - 4 years UK certified apprenticeship - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - Work flexible schedules including weekends, nights, and holidays - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Experience in English-language communication skills, both written and verbal PREFERRED QUALIFICATIONS - Associate's degree in Mechnical or Electrical - Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards - Experience with robotic operation and maintenance - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year IRL/UK certified apprenticeship - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline or operations Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working. In this role, you'll pay close attention to our processes to help maintain our high standards, and you'll put in place upgrades to take that standard even higher. Key job responsibilities - Demonstrate best practice on using equipment safely and monitor teams to ensure everyone follows the correct processes - Keep track of equipment performance through visual checks, condition-based monitoring, and preventative maintenance tasks and schedule additional servicing when required - Supervise technicians on shift to support their development and act as the first point of contact for Reliability Maintenance Engineers - Solve issues in equipment to reduce downtime for operations so they can process packages as quickly as possible - Support in finding ways to continually improve systems and standardise processes across the EU network A day in the life In every shift, you'll be leading a team to make sure everyone has the equipment they need and that it's running properly. That involves monitoring processes so that regulations and policies are followed and ensuring that preventative maintenance is carried out to increase equipment uptime. With everything you observe on your shifts, you'll suggest improvements to make our systems more efficient and productive and then implement those improvements across an EU-wide function. You'll also be monitoring processes with tools like Scada to guarantee their performance, as well as working closely with your line manager to assist with admin tasks. This role is located at one of our operational sites. You'll work shift patterns, which may include some weekends and nights. As you develop your experience within this exciting part of Amazon, you'll be well-placed to progress into more senior roles. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year IRL/UK certified apprenticeship - Relevant experience in a technical leadership role - Relevant experience working in both electrical and mechanical disciplines - Relevant experience in automation or material handling equipment environments - Advanced proficiency in verbal and written English PREFERRED QUALIFICATIONS - Experience working in a multi-contractor and multi-site working environment - Understanding of PLC based controls systems and statutory compliance requirements - Experience using computerised maintenance management systems to plan proactive maintenance and record reactive tasks - A degree preferably in a technical discipline or operations Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks like painting and plumbing and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
20/09/2026
Full time
The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations - they're the ones keeping vital machinery running at all times. As an RME Technician, you'll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities - Proactive and preventative maintenance tasks on a wide range of site equipment - Carry out reactive repairs and fault diagnosis in a live distribution warehouse - Use the latest tools to maximise equipment effectiveness - Uphold all health and safety policies and practices - Support the development and progression of on-site apprentices - Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You'll carry out a range of planned preventative maintenance to our sites' equipment to make sure it's working safely. As an RME Technician, you'll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You'll also make suggestions for long-term improvements. Working alongside senior colleagues, you'll undertake day-to-day maintenance tasks like painting and plumbing and will liaise with contractors if you need external expertise. You'll work on a range of shifts to make sure our sites are supported around the clock - allowing Amazon to deliver at the speed we're known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology - some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon's technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon's crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. BASIC QUALIFICATIONS - completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics - Relevant experience as a qualified engineer - Relevant experience working in mechanical and/or electrical maintenance - Advanced proficiency in the local language verbally and in writing PREFERRED QUALIFICATIONS - Experience in condition-based monitoring - Experience working with print and apply machines - Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice ( ) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
