P+S Personnel are pleased to be working on behalf of our clients, who are currently seeking a Labourer to join their team on a full-time, temporary basis based in Leiston. Main Responsibilities: Carry out a variety of manual tasks including lifting, carrying, cleaning, tidying, and general assistance. Support trades such as welders, fitters, fabricators, and riggers by preparing materials, tools, and work areas. Load and unload deliveries, tools, components, and equipment. Assist with setup and mobilisation for projects, shutdowns, or site work. Maintain cleanliness and organisation of the workshop, yard, and storage areas. Move equipment, materials, and stock safely using manual handling techniques or mechanical aids if trained. Assist with basic maintenance of tools and equipment (e.g., cleaning, storing, checking for obvious defects). Support stock control activities including labelling, sorting, and storing components. Assist on customer sites, power stations, industrial plants, or construction areas under supervision. Follow site-specific safety rules, permit systems, and instructions from supervisors. Support the team during installations, shutdowns, outage works, and general on-site tasks. Work in line with company health and safety procedures, risk assessments, and safe systems of work. Use the correct PPE at all times and report hazards, near misses, or unsafe conditions immediately. Ensure work areas remain clean, tidy, and safe at all times. Assist with basic tasks such as painting, sweeping, waste removal, and simple maintenance. Support ad hoc tasks as instructed by supervisors or managers. Contribute to a positive and efficient working environment. Person Specification: Good practical ability and willingness to perform manual labour. Strong work ethic, reliability, and a positive attitude. Ability to follow instructions clearly and work safely. Basic understanding of health and safety principles. Good communication and teamwork skills. Previous experience as a labourer in engineering, construction, workshop, or industrial environments. (Desirable) Valid CSCS, CCNSG, or equivalent safety training (if required for site work). (Desirable) Forklift, telehandler, MEWP, or banksman training (advantageous but not essential). (Desirable) Driving licence. (Desirable) Please note all CVs will be reviewed and we will comeback to you as soon as we can If this is a role you are interested in, please apply online ensuring your CV is up to date.
28/02/2026
Seasonal
P+S Personnel are pleased to be working on behalf of our clients, who are currently seeking a Labourer to join their team on a full-time, temporary basis based in Leiston. Main Responsibilities: Carry out a variety of manual tasks including lifting, carrying, cleaning, tidying, and general assistance. Support trades such as welders, fitters, fabricators, and riggers by preparing materials, tools, and work areas. Load and unload deliveries, tools, components, and equipment. Assist with setup and mobilisation for projects, shutdowns, or site work. Maintain cleanliness and organisation of the workshop, yard, and storage areas. Move equipment, materials, and stock safely using manual handling techniques or mechanical aids if trained. Assist with basic maintenance of tools and equipment (e.g., cleaning, storing, checking for obvious defects). Support stock control activities including labelling, sorting, and storing components. Assist on customer sites, power stations, industrial plants, or construction areas under supervision. Follow site-specific safety rules, permit systems, and instructions from supervisors. Support the team during installations, shutdowns, outage works, and general on-site tasks. Work in line with company health and safety procedures, risk assessments, and safe systems of work. Use the correct PPE at all times and report hazards, near misses, or unsafe conditions immediately. Ensure work areas remain clean, tidy, and safe at all times. Assist with basic tasks such as painting, sweeping, waste removal, and simple maintenance. Support ad hoc tasks as instructed by supervisors or managers. Contribute to a positive and efficient working environment. Person Specification: Good practical ability and willingness to perform manual labour. Strong work ethic, reliability, and a positive attitude. Ability to follow instructions clearly and work safely. Basic understanding of health and safety principles. Good communication and teamwork skills. Previous experience as a labourer in engineering, construction, workshop, or industrial environments. (Desirable) Valid CSCS, CCNSG, or equivalent safety training (if required for site work). (Desirable) Forklift, telehandler, MEWP, or banksman training (advantageous but not essential). (Desirable) Driving licence. (Desirable) Please note all CVs will be reviewed and we will comeback to you as soon as we can If this is a role you are interested in, please apply online ensuring your CV is up to date.
P+S Personnel are pleased to be working on behalf of our clients, who are currently seeking a Fitter to join their team on a full-time, temporary basis based in Leiston. Main Responsibilities: Perform mechanical fitting, assembly, fault-finding, repair, and overhaul of industrial machinery, pumps, rotating equipment, engines, gearboxes, compressors, valves, and associated systems. Dismantle and reassemble equipment using appropriate tools, techniques, and tolerances. Replace worn or damaged components, conduct alignments, and carry out routine servicing tasks. Identify mechanical faults and propose corrective actions to supervisors or engineers. Install new mechanical equipment, components, and assemblies in accordance with drawings, specifications, and engineering standards. Support the commissioning of new or refurbished equipment, including functional testing and verification. Assist in rigging, lifting, and positioning of heavy equipment (with support from riggers or lifting teams). Work in line with company procedures, risk assessments, method statements, and permit-to-work systems. Ensure all work is completed safely and complies with relevant engineering standards and regulations. Maintain accurate job sheets, inspection forms, service reports, and component traceability records. Follow HSE guidelines, use correct PPE, and participate in toolbox talks and safety briefings. Attend customer sites, power stations, industrial plants, offshore installations, or client facilities to carry out mechanical work. Liaise with clients professionally and represent the company to a high standard. Support breakdown response, outage work, shutdowns, and planned maintenance campaigns. Carry out mechanical assembly, refurbishment, cleaning, pressure testing, and component preparation. Ensure workshop equipment is operated safely and maintained correctly. Contribute to continuous improvement and quality initiatives. Qualifications and Experience: Recognised mechanical engineering qualification (e.g., NVQ/SVQ Level 3, City & Guilds, or equivalent). Proven experience as a Mechanical Fitter in industrial, engineering, manufacturing, marine, power, or oil & gas settings. Strong understanding of mechanical systems, rotating machinery, and engineering principles. Ability to read engineering drawings, schematics, and technical documentation. Good problem-solving skills with a methodical and safety-focused approach. Experience with diesel/gas engines, pumps, gearboxes, or rotating equipment. (Desirable) Please note all CVs will be reviewed and we will comeback to you as soon as we can If this is a role you are interested in, please apply online ensuring your CV is up to date.
28/02/2026
Seasonal
P+S Personnel are pleased to be working on behalf of our clients, who are currently seeking a Fitter to join their team on a full-time, temporary basis based in Leiston. Main Responsibilities: Perform mechanical fitting, assembly, fault-finding, repair, and overhaul of industrial machinery, pumps, rotating equipment, engines, gearboxes, compressors, valves, and associated systems. Dismantle and reassemble equipment using appropriate tools, techniques, and tolerances. Replace worn or damaged components, conduct alignments, and carry out routine servicing tasks. Identify mechanical faults and propose corrective actions to supervisors or engineers. Install new mechanical equipment, components, and assemblies in accordance with drawings, specifications, and engineering standards. Support the commissioning of new or refurbished equipment, including functional testing and verification. Assist in rigging, lifting, and positioning of heavy equipment (with support from riggers or lifting teams). Work in line with company procedures, risk assessments, method statements, and permit-to-work systems. Ensure all work is completed safely and complies with relevant engineering standards and regulations. Maintain accurate job sheets, inspection forms, service reports, and component traceability records. Follow HSE guidelines, use correct PPE, and participate in toolbox talks and safety briefings. Attend customer sites, power stations, industrial plants, offshore installations, or client facilities to carry out mechanical work. Liaise with clients professionally and represent the company to a high standard. Support breakdown response, outage work, shutdowns, and planned maintenance campaigns. Carry out mechanical assembly, refurbishment, cleaning, pressure testing, and component preparation. Ensure workshop equipment is operated safely and maintained correctly. Contribute to continuous improvement and quality initiatives. Qualifications and Experience: Recognised mechanical engineering qualification (e.g., NVQ/SVQ Level 3, City & Guilds, or equivalent). Proven experience as a Mechanical Fitter in industrial, engineering, manufacturing, marine, power, or oil & gas settings. Strong understanding of mechanical systems, rotating machinery, and engineering principles. Ability to read engineering drawings, schematics, and technical documentation. Good problem-solving skills with a methodical and safety-focused approach. Experience with diesel/gas engines, pumps, gearboxes, or rotating equipment. (Desirable) Please note all CVs will be reviewed and we will comeback to you as soon as we can If this is a role you are interested in, please apply online ensuring your CV is up to date.
Workshop Fitter - Fast-Paced Depot in Dagenham Location: Dagenham Salary: 35,000 Hours: Monday - Friday, 07:00 - 17:00 (Flexibility Required) Are you a hands-on problem solver passionate about keeping equipment in top condition? Do you thrive in a fast-paced workshop where no two days are the same? We're looking for a Workshop Fitter to join our client's depot in Dagenham. You'll play a crucial role in maintaining and repairing the fleet equipment, ensuring everything is in top working order and ready for use. Your Key Responsibilities: Repair & Maintenance - Carry out approved repairs, order parts, and log all labour and costs Workshop & Equipment Management - Keep your workspace organised and well-stocked with tools Inspection & Reporting - Assess equipment within 5 working days and provide repair estimates Testing & Compliance - Fully test machines after repair and issue 'Ready for Use' paperwork On-Site Support - Attend site breakdowns within 4 hours of a fault being reported What We're Looking For: Hands-on Technical Experience - Ideally with small tools Hardworking & Reliable - Takes ownership and pride in their work Problem-Solver - Uses initiative to find solutions Friendly & Adaptable - Works well in a team and independently Full UK Driving Licence - Essential IT Skills - Comfortable with Microsoft & Outlook Bonus Experience (Desirable but not Essential): IPAF, LOLER, and PAT Testing qualifications What's in It for You? Competitive Salary - 35,000 Generous Holidays - 28 days (including bank holidays) + extra for long service Pension & Health Benefits - Auto-enrolment pension + 100 towards eye tests/glasses Uniform & PPE Provided - So you're always work-ready Employee Rewards - Ad hoc bonuses & special occasion perks If you're a skilled, driven, enthusiastic Workshop Fitter looking for your next opportunity, we'd love to hear from you! Apply today and be part of a growing team!
27/02/2026
Full time
Workshop Fitter - Fast-Paced Depot in Dagenham Location: Dagenham Salary: 35,000 Hours: Monday - Friday, 07:00 - 17:00 (Flexibility Required) Are you a hands-on problem solver passionate about keeping equipment in top condition? Do you thrive in a fast-paced workshop where no two days are the same? We're looking for a Workshop Fitter to join our client's depot in Dagenham. You'll play a crucial role in maintaining and repairing the fleet equipment, ensuring everything is in top working order and ready for use. Your Key Responsibilities: Repair & Maintenance - Carry out approved repairs, order parts, and log all labour and costs Workshop & Equipment Management - Keep your workspace organised and well-stocked with tools Inspection & Reporting - Assess equipment within 5 working days and provide repair estimates Testing & Compliance - Fully test machines after repair and issue 'Ready for Use' paperwork On-Site Support - Attend site breakdowns within 4 hours of a fault being reported What We're Looking For: Hands-on Technical Experience - Ideally with small tools Hardworking & Reliable - Takes ownership and pride in their work Problem-Solver - Uses initiative to find solutions Friendly & Adaptable - Works well in a team and independently Full UK Driving Licence - Essential IT Skills - Comfortable with Microsoft & Outlook Bonus Experience (Desirable but not Essential): IPAF, LOLER, and PAT Testing qualifications What's in It for You? Competitive Salary - 35,000 Generous Holidays - 28 days (including bank holidays) + extra for long service Pension & Health Benefits - Auto-enrolment pension + 100 towards eye tests/glasses Uniform & PPE Provided - So you're always work-ready Employee Rewards - Ad hoc bonuses & special occasion perks If you're a skilled, driven, enthusiastic Workshop Fitter looking for your next opportunity, we'd love to hear from you! Apply today and be part of a growing team!
Mobile Plant Fitter £43853 per Year Permanent Location: Telford Recycling About The Role At AO Recycling, we are committed to extracting as much value as possible from the waste electrical and electronic equipment (WEEE) that is thrown away by UK households every year. We are growing rapidly and so with that, opportunities to develop and try new approaches become aplenty. If you are an energetic, hands on, innovative and professional, this is the environment for you. Our fridge recycling plant is one the most efficient and advanced in the UK and It sets a new standard in recovering metals, plastics, and gases. We use cross flow shredders to dismantle fridges, whilst safely extracting and treating the flammable gasses and CFCs through our cryo-condap solvent recovery plant. Ferrous and non-ferrous metals are recovered as well as plastics, and polyurethane foam. The whole process is fully automated and done using a series of screens, magnetic separators, and air classifiers. The plant produces high quality recycled products and complies with the highest European environmental standards. An exciting opportunity has arisen for a Mobile Plant Fitter that predominately carries out repairs and maintenance to our fleet of 36 forklift trucks in Telford. This role also provides welding and fabrication services, and general maintenance to an array of waste recycling machines. The successful candidate will work on a 4 on 4 off shift pattern on days and nights . Here's What You Can Expect To Be Doing No two days are ever the same at AO Recycling, but here s a taste of what you ll get up to: Carry out repair and maintenance on mobile plant and site infrastructure, as planned or directed by site management, including mechanical engineering, fabrication, and welding tasks Plan and deliver corrective and reactive work, making sure tools, parts and materials are available, minimising production downtime, upholding the highest safety standards, and maintaining tidy work areas through a clean as you go approach at all times Ensure the equipment used to undertake welding, fabrication or other service work is in good working order and serviced as required. Must have a solid understanding of all hot work activities and welding accessories Ensure that all plant and equipment on site is modified and improved, as necessary, to maximise equipment availability and performance whilst still achieving output levels required to meet production demands. Complete dynamic risk assessments where necessary to ensure that safe working practices are upheld, and risk reduced Be aware of stock control and maintain shift paperwork to the highest standard, to complete condition reports and other documentation as defined by the maintenance strategy Assess malfunctioning equipment and provide advice to the site management team to support and influence decision?making Carry out engineering project work and assist with new installations or refurbishments to ensure high?quality, reliable operational performance Update and administer the Computerised Maintenance Management System (CMMS) while completing Planned Maintenance inspections in line with the site maintenance plan, ensuring all work is carried out safely and effectively. Contribute to problem solving workshops, providing engineering expertise to identify root causes of failures and subsequent improvement actions Attend daily operational review meetings, providing updates on Planned Maintenance compliance, live defects, and ongoing improvement plans Complete dynamic risk assessments and adopt a clean-as-you-go approach to keep our plant super safe A Few Things About You Experienced and qualified engineer with mobile plant repairs, welding, fabrication, mechanical bias. Ability to provide solutions to real time problems from concept, build to installation. High attention to detail with high standards of work. Excellent communicator, both written and verbal. Highly organised and able to plan and prioritise workloads. Understanding of safe systems of work. I.e., Plant isolations and safety systems Computer literate and familiar with Microsoft office systems. Knowledge of CMMS systems. Driven and self-motivated. Good communicator. Ability to work on own initiative or part of a team. Our Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back - you ll be rewarded inside and outside of work. Holidays; 21 days holiday (inclusive of bank holidays) Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP s, Mental Health support and much more. Discounts; exclusive discounts across our product range. Family leave; Enhanced Maternity, Paternity and Adoption leave. Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts! To see all our benefits and perks, visit our AO Benefits page.
27/02/2026
Full time
Mobile Plant Fitter £43853 per Year Permanent Location: Telford Recycling About The Role At AO Recycling, we are committed to extracting as much value as possible from the waste electrical and electronic equipment (WEEE) that is thrown away by UK households every year. We are growing rapidly and so with that, opportunities to develop and try new approaches become aplenty. If you are an energetic, hands on, innovative and professional, this is the environment for you. Our fridge recycling plant is one the most efficient and advanced in the UK and It sets a new standard in recovering metals, plastics, and gases. We use cross flow shredders to dismantle fridges, whilst safely extracting and treating the flammable gasses and CFCs through our cryo-condap solvent recovery plant. Ferrous and non-ferrous metals are recovered as well as plastics, and polyurethane foam. The whole process is fully automated and done using a series of screens, magnetic separators, and air classifiers. The plant produces high quality recycled products and complies with the highest European environmental standards. An exciting opportunity has arisen for a Mobile Plant Fitter that predominately carries out repairs and maintenance to our fleet of 36 forklift trucks in Telford. This role also provides welding and fabrication services, and general maintenance to an array of waste recycling machines. The successful candidate will work on a 4 on 4 off shift pattern on days and nights . Here's What You Can Expect To Be Doing No two days are ever the same at AO Recycling, but here s a taste of what you ll get up to: Carry out repair and maintenance on mobile plant and site infrastructure, as planned or directed by site management, including mechanical engineering, fabrication, and welding tasks Plan and deliver corrective and reactive work, making sure tools, parts and materials are available, minimising production downtime, upholding the highest safety standards, and maintaining tidy work areas through a clean as you go approach at all times Ensure the equipment used to undertake welding, fabrication or other service work is in good working order and serviced as required. Must have a solid understanding of all hot work activities and welding accessories Ensure that all plant and equipment on site is modified and improved, as necessary, to maximise equipment availability and performance whilst still achieving output levels required to meet production demands. Complete dynamic risk assessments where necessary to ensure that safe working practices are upheld, and risk reduced Be aware of stock control and maintain shift paperwork to the highest standard, to complete condition reports and other documentation as defined by the maintenance strategy Assess malfunctioning equipment and provide advice to the site management team to support and influence decision?making Carry out engineering project work and assist with new installations or refurbishments to ensure high?quality, reliable operational performance Update and administer the Computerised Maintenance Management System (CMMS) while completing Planned Maintenance inspections in line with the site maintenance plan, ensuring all work is carried out safely and effectively. Contribute to problem solving workshops, providing engineering expertise to identify root causes of failures and subsequent improvement actions Attend daily operational review meetings, providing updates on Planned Maintenance compliance, live defects, and ongoing improvement plans Complete dynamic risk assessments and adopt a clean-as-you-go approach to keep our plant super safe A Few Things About You Experienced and qualified engineer with mobile plant repairs, welding, fabrication, mechanical bias. Ability to provide solutions to real time problems from concept, build to installation. High attention to detail with high standards of work. Excellent communicator, both written and verbal. Highly organised and able to plan and prioritise workloads. Understanding of safe systems of work. I.e., Plant isolations and safety systems Computer literate and familiar with Microsoft office systems. Knowledge of CMMS systems. Driven and self-motivated. Good communicator. Ability to work on own initiative or part of a team. Our Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back - you ll be rewarded inside and outside of work. Holidays; 21 days holiday (inclusive of bank holidays) Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP s, Mental Health support and much more. Discounts; exclusive discounts across our product range. Family leave; Enhanced Maternity, Paternity and Adoption leave. Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts! To see all our benefits and perks, visit our AO Benefits page.
RBU Sales UK Ltd t/a iRecruit UK
Doncaster, Yorkshire
We are currently seeking an experienced Fitter to join our busy and growing workshop team. Location: Doncaster Type: Full-time / Temporary- Permanent Salary: £14 / hr The Role: As a Fitter , you will be responsible for the assembly of new agricultural machinery to high standards, working from technical drawings and alongside our team of skilled engineers. You will be involved in the fitting and installation of mechanical components and systems on a range of specialist agricultural equipment. Key Responsibilities: Assemble agricultural machinery to detailed engineering drawings. Fit and install components, including mechanical, hydraulic, and basic electrical elements. Work collaboratively with experienced engineers to ensure quality standards are met. Ensure all work is completed safely and efficiently within the workshop environment. Carry out final checks to ensure machinery is ready for testing or delivery. Requirements: Proven experience in a similar fitter or assembler role. Strong mechanical fitting skills with the ability to read and interpret engineering drawings. Experience in agricultural machinery assembly (preferred but not essential). Good attention to detail and commitment to high-quality workmanship. Ability to work both independently and as part of a team. Job Types: Full-time, Temp to perm Benefits: Company pension Employee discount On-site parking Licence/Certification: Driving Licence (required) Work Location: In person
23/02/2026
Seasonal
We are currently seeking an experienced Fitter to join our busy and growing workshop team. Location: Doncaster Type: Full-time / Temporary- Permanent Salary: £14 / hr The Role: As a Fitter , you will be responsible for the assembly of new agricultural machinery to high standards, working from technical drawings and alongside our team of skilled engineers. You will be involved in the fitting and installation of mechanical components and systems on a range of specialist agricultural equipment. Key Responsibilities: Assemble agricultural machinery to detailed engineering drawings. Fit and install components, including mechanical, hydraulic, and basic electrical elements. Work collaboratively with experienced engineers to ensure quality standards are met. Ensure all work is completed safely and efficiently within the workshop environment. Carry out final checks to ensure machinery is ready for testing or delivery. Requirements: Proven experience in a similar fitter or assembler role. Strong mechanical fitting skills with the ability to read and interpret engineering drawings. Experience in agricultural machinery assembly (preferred but not essential). Good attention to detail and commitment to high-quality workmanship. Ability to work both independently and as part of a team. Job Types: Full-time, Temp to perm Benefits: Company pension Employee discount On-site parking Licence/Certification: Driving Licence (required) Work Location: In person
Plant Engineer/ Fitter Flannery Plant Hire is a leading provider of plant hire and specialist attachments to the construction industry across the UK and Ireland. With a comprehensive fleet of innovative machinery, we pride ourselves on delivering exceptional customer service and meeting our clients' project requirements. Summary of Role We are seeking a skilled and experienced Workshop Plant Fitters to join our team. The successful candidate will be responsible for the maintenance, repair, and servicing of a variety of construction equipment, ensuring that our fleet remains in optimal working condition. This role involves working both independently and collaboratively with our team of professionals. Duties & Responsibilities Maintenance and fitting duties on a wide range of Plant items such as hydraulic excavators, dumpers, telehandlers and dozers. Perform preventive maintenance to extend the lifespan of equipment. Adhere to all health and safety requirements and guidelines and conduct safety inspections on equipment and report any hazards or concerns. Carrying out any mechanical repairs and maintenance duties assigned or requested by the Service Manager Follow work practices and instructions as directed by the Service Manager Maintain accurate records of maintenance and repair activities. Essential Criteria: 2 years post qualification experience working as a Plant Fitter Experience and competency of fault-finding, maintenance and repair of heavy-duty construction plant Ability to work independently and collaboratively with a team. What we offer: Competitive salary dependent on experience A positive and collaborative work environment, and opportunities for professional growth and development At Flannery Plant Hire, we value diversity and are an equal opportunity employer. We encourage applications from all qualified individuals regardless of race, colour, religion, gender, sexual orientation, age, marital status, or disability.
20/02/2026
Full time
Plant Engineer/ Fitter Flannery Plant Hire is a leading provider of plant hire and specialist attachments to the construction industry across the UK and Ireland. With a comprehensive fleet of innovative machinery, we pride ourselves on delivering exceptional customer service and meeting our clients' project requirements. Summary of Role We are seeking a skilled and experienced Workshop Plant Fitters to join our team. The successful candidate will be responsible for the maintenance, repair, and servicing of a variety of construction equipment, ensuring that our fleet remains in optimal working condition. This role involves working both independently and collaboratively with our team of professionals. Duties & Responsibilities Maintenance and fitting duties on a wide range of Plant items such as hydraulic excavators, dumpers, telehandlers and dozers. Perform preventive maintenance to extend the lifespan of equipment. Adhere to all health and safety requirements and guidelines and conduct safety inspections on equipment and report any hazards or concerns. Carrying out any mechanical repairs and maintenance duties assigned or requested by the Service Manager Follow work practices and instructions as directed by the Service Manager Maintain accurate records of maintenance and repair activities. Essential Criteria: 2 years post qualification experience working as a Plant Fitter Experience and competency of fault-finding, maintenance and repair of heavy-duty construction plant Ability to work independently and collaboratively with a team. What we offer: Competitive salary dependent on experience A positive and collaborative work environment, and opportunities for professional growth and development At Flannery Plant Hire, we value diversity and are an equal opportunity employer. We encourage applications from all qualified individuals regardless of race, colour, religion, gender, sexual orientation, age, marital status, or disability.
Plant Fitter Salary and Package 40,000 - 55,000 depending on experience and overtime Location Towcester - Workshop based with site call-outs as required Full-time, Permanent The Plant Fitter role is primarily workshop based, supporting a busy internal fleet. This Plant Fitter position suits someone who prefers structured workshop work but is happy to attend occasional site breakdowns. The Plant Fitter will maintain and repair construction machinery used on civils and infrastructure projects. As a Plant Fitter you will work closely with plant and transport teams to keep equipment operational. This Plant Fitter opportunity offers stable, long term employment within a growing contractor. The Plant Fitter will also be provided with a fully equipped van for site response when required. About the Company A well established civil engineering and infrastructure contractor delivering projects across multiple sectors including utilities, groundworks, and enabling works. The business operates its own fleet and engineering support function, allowing strong control over plant reliability and site delivery. With consistent project demand and long term contracts secured, they provide a stable and well structured working environment. Why Join Them The company offers the stability of an established contractor combined with the culture of a practical, close knit engineering team. Equipment is modern and well maintained, workloads are realistic, and management understand the importance of proper maintenance and support. Engineers are trusted to manage their work while still having full operational backing. About the Role Maintain and repair construction plant in the workshop Diagnose mechanical and hydraulic faults Carry out servicing, inspections, and adjustments Prepare machines for site deployment Attend breakdowns on site when required Complete repair records and maintenance logs Work on excavators, dumpers, rollers, and small plant Liaise with plant and transport teams Ensure machinery is safe and compliant Maintain tools and workshop standards Assist with fleet inspections and planning Follow health and safety procedures Candidates from plant fitting, heavy equipment, agricultural machinery, or similar mechanical backgrounds will be well suited. Summary This role is ideal for a hands on engineer who prefers workshop stability but still enjoys occasional field work. It offers variety, autonomy, and long term security within a professional contractor environment. Contact Mark at Up Front Recruitment for more information.
20/02/2026
Full time
Plant Fitter Salary and Package 40,000 - 55,000 depending on experience and overtime Location Towcester - Workshop based with site call-outs as required Full-time, Permanent The Plant Fitter role is primarily workshop based, supporting a busy internal fleet. This Plant Fitter position suits someone who prefers structured workshop work but is happy to attend occasional site breakdowns. The Plant Fitter will maintain and repair construction machinery used on civils and infrastructure projects. As a Plant Fitter you will work closely with plant and transport teams to keep equipment operational. This Plant Fitter opportunity offers stable, long term employment within a growing contractor. The Plant Fitter will also be provided with a fully equipped van for site response when required. About the Company A well established civil engineering and infrastructure contractor delivering projects across multiple sectors including utilities, groundworks, and enabling works. The business operates its own fleet and engineering support function, allowing strong control over plant reliability and site delivery. With consistent project demand and long term contracts secured, they provide a stable and well structured working environment. Why Join Them The company offers the stability of an established contractor combined with the culture of a practical, close knit engineering team. Equipment is modern and well maintained, workloads are realistic, and management understand the importance of proper maintenance and support. Engineers are trusted to manage their work while still having full operational backing. About the Role Maintain and repair construction plant in the workshop Diagnose mechanical and hydraulic faults Carry out servicing, inspections, and adjustments Prepare machines for site deployment Attend breakdowns on site when required Complete repair records and maintenance logs Work on excavators, dumpers, rollers, and small plant Liaise with plant and transport teams Ensure machinery is safe and compliant Maintain tools and workshop standards Assist with fleet inspections and planning Follow health and safety procedures Candidates from plant fitting, heavy equipment, agricultural machinery, or similar mechanical backgrounds will be well suited. Summary This role is ideal for a hands on engineer who prefers workshop stability but still enjoys occasional field work. It offers variety, autonomy, and long term security within a professional contractor environment. Contact Mark at Up Front Recruitment for more information.
Mobile Plant Fitter Salary and Package 40,000 to 60,000 depending on experience plus company vehicle and package Location Wolverhampton base covering Midlands and North West Sites Full-time, Permanent Position This Mobile Plant Fitter role is suited to an engineer who enjoys working across sites rather than staying workshop based. The Mobile Plant Fitter will support a varied fleet used on remediation and earthworks projects. As a Mobile Plant Fitter you will travel across the Midlands and North West attending plant faults and carrying out repairs. The Mobile Plant Fitter will work independently for much of the time while remaining part of a close technical team. This Mobile Plant Fitter position offers steady work across long term projects. About the Company A long established remediation and enabling works contractor delivering brownfield site preparation services nationwide. The business operates its own plant fleet, employs its own engineering and operational teams, and has built a strong reputation for technical delivery across complex ground engineering and earthworks schemes. Why Join Them The company has operated successfully for over five decades and continues to grow through repeat business and long term client relationships. Work is consistent due to secured contracts and in house delivery capability. Engineers are supported by experienced managers who understand plant operations, and investment in machinery and technology is ongoing. The environment is practical, stable, and focused on doing work properly. About the Role Travel to sites across the Midlands and North West Diagnose faults on earthmoving and remediation plant Carry out mechanical, hydraulic, and basic electrical repairs Provide breakdown response and fault finding Complete routine servicing and inspections Work on excavators, dozers, dumpers and specialist equipment Liaise with site teams regarding machine condition Record maintenance activity and parts required Ensure plant is safe and compliant for operation Maintain tools, van stock, and equipment Follow health and safety procedures at all times Applicants should have experience working as a plant fitter, field service engineer, or similar role supporting heavy plant or construction machinery. Summary This is a field based engineering position offering variety, autonomy, and consistent work across major ground engineering projects. It suits a practical plant engineer who prefers site work, problem solving, and keeping machinery operating reliably. Contact Mark at Up Front Recruitment for more information.
20/02/2026
Full time
Mobile Plant Fitter Salary and Package 40,000 to 60,000 depending on experience plus company vehicle and package Location Wolverhampton base covering Midlands and North West Sites Full-time, Permanent Position This Mobile Plant Fitter role is suited to an engineer who enjoys working across sites rather than staying workshop based. The Mobile Plant Fitter will support a varied fleet used on remediation and earthworks projects. As a Mobile Plant Fitter you will travel across the Midlands and North West attending plant faults and carrying out repairs. The Mobile Plant Fitter will work independently for much of the time while remaining part of a close technical team. This Mobile Plant Fitter position offers steady work across long term projects. About the Company A long established remediation and enabling works contractor delivering brownfield site preparation services nationwide. The business operates its own plant fleet, employs its own engineering and operational teams, and has built a strong reputation for technical delivery across complex ground engineering and earthworks schemes. Why Join Them The company has operated successfully for over five decades and continues to grow through repeat business and long term client relationships. Work is consistent due to secured contracts and in house delivery capability. Engineers are supported by experienced managers who understand plant operations, and investment in machinery and technology is ongoing. The environment is practical, stable, and focused on doing work properly. About the Role Travel to sites across the Midlands and North West Diagnose faults on earthmoving and remediation plant Carry out mechanical, hydraulic, and basic electrical repairs Provide breakdown response and fault finding Complete routine servicing and inspections Work on excavators, dozers, dumpers and specialist equipment Liaise with site teams regarding machine condition Record maintenance activity and parts required Ensure plant is safe and compliant for operation Maintain tools, van stock, and equipment Follow health and safety procedures at all times Applicants should have experience working as a plant fitter, field service engineer, or similar role supporting heavy plant or construction machinery. Summary This is a field based engineering position offering variety, autonomy, and consistent work across major ground engineering projects. It suits a practical plant engineer who prefers site work, problem solving, and keeping machinery operating reliably. Contact Mark at Up Front Recruitment for more information.
HGV Fitter / Mechanic Salary and Package Salary negotiable depending on experience plus company package Location Cinderford, Gloucestershire or Warrington Full-time, Permanent Position The HGV Fitter / Mechanic role focuses on supporting a specialist fleet through reactive maintenance. This HGV Fitter / Mechanic opportunity suits someone confident working independently on heavy vehicles or plant. The HGV Fitter / Mechanic will attend breakdowns and carry out minor repairs. As an HGV Fitter / Mechanic you will work closely with operations teams to keep equipment available. This HGV Fitter / Mechanic position offers stable long term work within a well established engineering environment. About the Company An established UK engineering and surfacing specialist delivering highway maintenance and surface treatment solutions across projects ranging from local works to major infrastructure programmes. The business operates a modern fleet, maintains recognised industry accreditations, and has a longstanding reputation for reliable delivery. Why Join Them Steady workflow from secured contracts provides consistent engineering activity. The team is experienced, practical, and supportive, with management who understand fleet and plant operations. Equipment is well maintained, investment in machinery is ongoing, and engineers are trusted to manage their workload. The role offers stability and consistency. About the Role Provide breakdown support for HGV road sprayers Carry out minor mechanical repairs and adjustments Diagnose faults and identify practical solutions Attend sites when equipment requires attention Support basic servicing and upkeep tasks Communicate faults and repair needs clearly Maintain records of work completed Work across depot and field environments Follow health and safety procedures at all times Candidates with backgrounds in HGV maintenance, plant fitting, agricultural machinery, or similar heavy equipment will be well suited. Summary This role suits a hands on engineer who prefers practical fault finding and keeping equipment operational rather than workshop heavy rebuild work. It offers consistent activity, straightforward responsibilities, and long term stability within a professional operation. Contact Mark at Up Front Recruitment for more information.
20/02/2026
Full time
HGV Fitter / Mechanic Salary and Package Salary negotiable depending on experience plus company package Location Cinderford, Gloucestershire or Warrington Full-time, Permanent Position The HGV Fitter / Mechanic role focuses on supporting a specialist fleet through reactive maintenance. This HGV Fitter / Mechanic opportunity suits someone confident working independently on heavy vehicles or plant. The HGV Fitter / Mechanic will attend breakdowns and carry out minor repairs. As an HGV Fitter / Mechanic you will work closely with operations teams to keep equipment available. This HGV Fitter / Mechanic position offers stable long term work within a well established engineering environment. About the Company An established UK engineering and surfacing specialist delivering highway maintenance and surface treatment solutions across projects ranging from local works to major infrastructure programmes. The business operates a modern fleet, maintains recognised industry accreditations, and has a longstanding reputation for reliable delivery. Why Join Them Steady workflow from secured contracts provides consistent engineering activity. The team is experienced, practical, and supportive, with management who understand fleet and plant operations. Equipment is well maintained, investment in machinery is ongoing, and engineers are trusted to manage their workload. The role offers stability and consistency. About the Role Provide breakdown support for HGV road sprayers Carry out minor mechanical repairs and adjustments Diagnose faults and identify practical solutions Attend sites when equipment requires attention Support basic servicing and upkeep tasks Communicate faults and repair needs clearly Maintain records of work completed Work across depot and field environments Follow health and safety procedures at all times Candidates with backgrounds in HGV maintenance, plant fitting, agricultural machinery, or similar heavy equipment will be well suited. Summary This role suits a hands on engineer who prefers practical fault finding and keeping equipment operational rather than workshop heavy rebuild work. It offers consistent activity, straightforward responsibilities, and long term stability within a professional operation. Contact Mark at Up Front Recruitment for more information.
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
20/02/2026
Full time
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don t worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. Responsibilities include: - Support the Senior Service Engineer in the effective running of the Depot workshop within the region. Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer s specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment. Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy. To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required. Accurately complete all relevant paperwork including engineer s report, off hire, pre/delivery inspection and service sheets. Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed. About you: - Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent. Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding. Have a mature outlook and the ability to prioritise tasks and work well under pressure. Understand the importance of excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON , a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment
19/02/2026
Full time
We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don t worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. Responsibilities include: - Support the Senior Service Engineer in the effective running of the Depot workshop within the region. Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer s specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment. Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy. To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required. Accurately complete all relevant paperwork including engineer s report, off hire, pre/delivery inspection and service sheets. Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed. About you: - Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent. Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding. Have a mature outlook and the ability to prioritise tasks and work well under pressure. Understand the importance of excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON , a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment
Job Title: Plant Fitter Reporting To: Workshop Manager / Plant Manager Employment Type: Full-Time Company Overview We are an established Groundworks and Civil Engineering contractor delivering infrastructure, drainage, foundations, roadworks, and associated civil engineering projects. We operate a modern fleet of plant and equipment and are seeking an experienced Plant Fitter to support our operations. Job Purpose The Plant Fitter will be responsible for the inspection, servicing, maintenance, and repair of construction plant to ensure reliability, safety, and minimal downtime across multiple groundworks and civils sites. Key Responsibilities Service, maintain, and repair: 360 excavators Articulated dump trucks (ADT) Forward tipping dumpers Telescopic forklifts Diagnose mechanical, hydraulic, and electrical faults efficiently. Carry out planned preventative maintenance in accordance with service schedules. Attend site breakdowns and carry out timely repairs to minimise operational disruption. Inspect plant to ensure compliance with safety regulations and company standards. Complete job sheets, service records, and maintenance documentation accurately. Prepare plant for statutory inspections and ensure compliance. Maintain workshop cleanliness and safe working practices. Skills & Experience Required Proven experience as a Plant Fitter or Plant Mechanic within groundworks, construction, or civil engineering. Strong knowledge of diesel engines, hydraulics, and electrical systems. Ability to fault-find independently and work under pressure. Welding and fabrication experience (desirable). NVQ Level 2/3 in Plant Maintenance or equivalent qualification preferred. Full UK driving licence (essential). Personal Attributes Reliable and self-motivated Strong problem-solving ability Good communication skills Flexible approach to site and workshop-based work Strong commitment to health and safety What We Offer Competitive salary (DOE) Overtime opportunities Company vehicle (if applicable) Pension scheme Ongoing training and development
19/02/2026
Contract
Job Title: Plant Fitter Reporting To: Workshop Manager / Plant Manager Employment Type: Full-Time Company Overview We are an established Groundworks and Civil Engineering contractor delivering infrastructure, drainage, foundations, roadworks, and associated civil engineering projects. We operate a modern fleet of plant and equipment and are seeking an experienced Plant Fitter to support our operations. Job Purpose The Plant Fitter will be responsible for the inspection, servicing, maintenance, and repair of construction plant to ensure reliability, safety, and minimal downtime across multiple groundworks and civils sites. Key Responsibilities Service, maintain, and repair: 360 excavators Articulated dump trucks (ADT) Forward tipping dumpers Telescopic forklifts Diagnose mechanical, hydraulic, and electrical faults efficiently. Carry out planned preventative maintenance in accordance with service schedules. Attend site breakdowns and carry out timely repairs to minimise operational disruption. Inspect plant to ensure compliance with safety regulations and company standards. Complete job sheets, service records, and maintenance documentation accurately. Prepare plant for statutory inspections and ensure compliance. Maintain workshop cleanliness and safe working practices. Skills & Experience Required Proven experience as a Plant Fitter or Plant Mechanic within groundworks, construction, or civil engineering. Strong knowledge of diesel engines, hydraulics, and electrical systems. Ability to fault-find independently and work under pressure. Welding and fabrication experience (desirable). NVQ Level 2/3 in Plant Maintenance or equivalent qualification preferred. Full UK driving licence (essential). Personal Attributes Reliable and self-motivated Strong problem-solving ability Good communication skills Flexible approach to site and workshop-based work Strong commitment to health and safety What We Offer Competitive salary (DOE) Overtime opportunities Company vehicle (if applicable) Pension scheme Ongoing training and development
Hydraulic Attachments Fitter - Nottingham 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Nottingham. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
17/02/2026
Full time
Hydraulic Attachments Fitter - Nottingham 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Nottingham. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
Hydraulic Attachments Fitter - Manchester 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Manchester. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
17/02/2026
Full time
Hydraulic Attachments Fitter - Manchester 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Manchester. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
Hydraulic Attachments Fitter - Birmingham 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Birmingham. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
17/02/2026
Full time
Hydraulic Attachments Fitter - Birmingham 34,000 - 37,000 per annum + On-Site Work Van (business use only) We are currently recruiting for an experienced Hydraulic Attachments Fitter to join a busy and expanding operation in Birmingham. This is a practical, field-based and workshop-supported role suited to someone who enjoys variety, problem solving and working with heavy plant or construction equipment. The position involves fitting, servicing and repairing hydraulic attachments, along with delivering and collecting equipment and safely attaching or removing attachments on customer sites. The Role Deliver and collect machinery and attachments to and from customer sites Fit, remove and assemble hydraulic attachments on a range of plant equipment Carry out pre-delivery inspections (PDI) to ensure machines and attachments are safe and operational Diagnose hydraulic faults and complete repairs in a timely manner Perform routine servicing and preventative maintenance Complete job sheets and maintain accurate service and parts records Work alongside technical teams to improve equipment performance where required Follow all company health & safety procedures at all times About You Hands-on experience working with hydraulics and mechanical fitting Confident reading technical drawings and hydraulic schematics Strong fault-finding and troubleshooting ability Reliable, self-motivated and able to manage workload independently Good communication and customer-facing skills Full UK driving licence is essential Advantageous but Not Essential Experience with plant, agricultural or construction machinery Relevant hydraulic or mechanical qualifications/certifications Working Environment Split between workshop duties and on-site field work Physical role involving lifting and manual handling Occasional overtime and travel depending on workload This is a great opportunity for a mechanically skilled individual looking for a varied role with a competitive salary, stable hours and the chance to work with a wide range of equipment and customers.
Plant Fitter / Field Service Engineer - Servicing and testing Vehicles on site across the West Midlands Salary and Package 30,000 to 50,000 plus Overtime + company van and fuel card Location West Midlands Full-time, Permanent Position A Plant Fitter / Field Service Engineer is required to support a busy fleet operation across the region. This Plant Fitter / Field Service Engineer role will suit a Plant Fitter / Field Service Engineer who is confident working independently on sites. The successful Plant Fitter / Field Service Engineer will handle mainly servicing and testing. This Plant Fitter / Field Service Engineer position offers stable, long-term work with consistent equipment and sites. About the Company An established groundworks and civil engineering contractor based in the Midlands, delivering residential infrastructure, roads, sewers, earthworks, and plot groundworks. The business operates with a strong focus on quality, safety standards, sustainability, and investment in modern plant and technology. Why Join Them Strong pipeline of regional projects Well maintained fleet and ongoing investment in equipment Supportive management team with practical industry experience Long-term opportunity with a growing contractor Varied site work rather than workshop-only routine Strong safety culture across all operations Clear structure and organised workload planning About the Role Servicing, testing on live sites Carry out routine inspections and preventative maintenance Complete service reports and maintenance records Ensure compliance with health and safety standards Identify potential issues before failure occurs Work independently across regional sites Summary This is a solid opportunity for a skilled plant engineer who prefers field-based work and wants consistency, autonomy, and reliable employment with a contractor that values proper maintenance standards and professional working practices. Contact Mark at Up Front Recruitment for more information.
15/02/2026
Full time
Plant Fitter / Field Service Engineer - Servicing and testing Vehicles on site across the West Midlands Salary and Package 30,000 to 50,000 plus Overtime + company van and fuel card Location West Midlands Full-time, Permanent Position A Plant Fitter / Field Service Engineer is required to support a busy fleet operation across the region. This Plant Fitter / Field Service Engineer role will suit a Plant Fitter / Field Service Engineer who is confident working independently on sites. The successful Plant Fitter / Field Service Engineer will handle mainly servicing and testing. This Plant Fitter / Field Service Engineer position offers stable, long-term work with consistent equipment and sites. About the Company An established groundworks and civil engineering contractor based in the Midlands, delivering residential infrastructure, roads, sewers, earthworks, and plot groundworks. The business operates with a strong focus on quality, safety standards, sustainability, and investment in modern plant and technology. Why Join Them Strong pipeline of regional projects Well maintained fleet and ongoing investment in equipment Supportive management team with practical industry experience Long-term opportunity with a growing contractor Varied site work rather than workshop-only routine Strong safety culture across all operations Clear structure and organised workload planning About the Role Servicing, testing on live sites Carry out routine inspections and preventative maintenance Complete service reports and maintenance records Ensure compliance with health and safety standards Identify potential issues before failure occurs Work independently across regional sites Summary This is a solid opportunity for a skilled plant engineer who prefers field-based work and wants consistency, autonomy, and reliable employment with a contractor that values proper maintenance standards and professional working practices. Contact Mark at Up Front Recruitment for more information.
Plant Fitter / Field Service Engineer - Servicing Vehicles on site across the West Midlands Salary and Package £38,000 to £50,000 plus company van and fuel card Location West Midlands Full-time, Permanent Position A Plant Fitter / Field Service Engineer is required to support a busy fleet operation across the region. This Plant Fitter / Field Service Engineer role will suit a Plant Fitter / Field Service Engineer who is confident working independently on sites. The successful Plant Fitter / Field Service Engineer will handle mainly servicing and maintenance. This Plant Fitter / Field Service Engineer position offers stable, long-term work with consistent equipment and sites. About the Company An established groundworks and civil engineering contractor based in the Midlands, delivering residential infrastructure, roads, sewers, earthworks, and plot groundworks. The business operates with a strong focus on quality, safety standards, sustainability, and investment in modern plant and technology. Why Join Them Strong pipeline of regional projects Well maintained fleet and ongoing investment in equipment Supportive management team with practical industry experience Long-term opportunity with a growing contractor Varied site work rather than workshop-only routine Strong safety culture across all operations Clear structure and organised workload planning About the Role Service, maintain and repair plant machinery on live sites Carry out routine inspections and preventative maintenance Complete service reports and maintenance records Ensure compliance with health and safety standards Identify potential issues before failure occurs Work independently across regional sites Summary This is a solid opportunity for a skilled plant engineer who prefers field-based work and wants consistency, autonomy, and reliable employment with a contractor that values proper maintenance standards and professional working practices. Contact Mark at Up Front Recruitment for more information.
13/02/2026
Full time
Plant Fitter / Field Service Engineer - Servicing Vehicles on site across the West Midlands Salary and Package £38,000 to £50,000 plus company van and fuel card Location West Midlands Full-time, Permanent Position A Plant Fitter / Field Service Engineer is required to support a busy fleet operation across the region. This Plant Fitter / Field Service Engineer role will suit a Plant Fitter / Field Service Engineer who is confident working independently on sites. The successful Plant Fitter / Field Service Engineer will handle mainly servicing and maintenance. This Plant Fitter / Field Service Engineer position offers stable, long-term work with consistent equipment and sites. About the Company An established groundworks and civil engineering contractor based in the Midlands, delivering residential infrastructure, roads, sewers, earthworks, and plot groundworks. The business operates with a strong focus on quality, safety standards, sustainability, and investment in modern plant and technology. Why Join Them Strong pipeline of regional projects Well maintained fleet and ongoing investment in equipment Supportive management team with practical industry experience Long-term opportunity with a growing contractor Varied site work rather than workshop-only routine Strong safety culture across all operations Clear structure and organised workload planning About the Role Service, maintain and repair plant machinery on live sites Carry out routine inspections and preventative maintenance Complete service reports and maintenance records Ensure compliance with health and safety standards Identify potential issues before failure occurs Work independently across regional sites Summary This is a solid opportunity for a skilled plant engineer who prefers field-based work and wants consistency, autonomy, and reliable employment with a contractor that values proper maintenance standards and professional working practices. Contact Mark at Up Front Recruitment for more information.
Plant Fitter - Civil Engineering and Groundworks Company Salary and Package - Competitive salary depending on experience plus company package and overtime Location - Company based in Chigwell Full-time, Permanent Position This Plant Fitter position is suited to a hands-on Plant Fitter who wants stable, long-term work with a busy contractor. The Plant Fitter will support multiple active sites, maintaining and repairing machinery essential to groundworks, RC frame, and civil engineering projects. This Plant Fitter role offers consistent workload and practical day-to-day responsibility for a Plant Fitter who enjoys being site-based and technically involved. About the Company Established civil engineering and structural contractor operating since 2008, delivering groundworks, reinforced concrete frames, infrastructure, and substructure packages across residential, commercial, and major infrastructure sectors with an in-house team and accredited management systems. Why Join Them The business maintains a steady project pipeline across multiple sectors, providing reliable long-term work rather than short-term placements. The company invests in equipment, safety systems, and training, and promotes from within where possible. Workloads are planned realistically with proper plant support and organised logistics. About the Role You will be responsible for maintaining, servicing, and repairing construction plant and equipment used across active project sites. Responsibilities include: Inspecting plant machinery for faults, wear, and safety issues Carrying out planned servicing and preventative maintenance Diagnosing mechanical and hydraulic faults Repairing excavators, dumpers, rollers, and associated plant Completing breakdown repairs on site when required Ensuring plant complies with safety standards and regulations Keeping service records accurate and up to date Coordinating with site teams to minimise downtime Ordering parts and managing stock levels where necessary Supporting plant mobilisation and demobilisation between sites Conducting pre-use inspections and reporting defects Maintaining a clean and organised workshop or service vehicle Summary This is a practical, stable role for a Plant Fitter who values consistent work, proper organisation, and a contractor that plans ahead. It suits someone experienced with construction plant who wants responsibility, variety of equipment, and long-term employment rather than short-term site cover. Contact Mark at Up Front Recruitment for more information.
12/02/2026
Full time
Plant Fitter - Civil Engineering and Groundworks Company Salary and Package - Competitive salary depending on experience plus company package and overtime Location - Company based in Chigwell Full-time, Permanent Position This Plant Fitter position is suited to a hands-on Plant Fitter who wants stable, long-term work with a busy contractor. The Plant Fitter will support multiple active sites, maintaining and repairing machinery essential to groundworks, RC frame, and civil engineering projects. This Plant Fitter role offers consistent workload and practical day-to-day responsibility for a Plant Fitter who enjoys being site-based and technically involved. About the Company Established civil engineering and structural contractor operating since 2008, delivering groundworks, reinforced concrete frames, infrastructure, and substructure packages across residential, commercial, and major infrastructure sectors with an in-house team and accredited management systems. Why Join Them The business maintains a steady project pipeline across multiple sectors, providing reliable long-term work rather than short-term placements. The company invests in equipment, safety systems, and training, and promotes from within where possible. Workloads are planned realistically with proper plant support and organised logistics. About the Role You will be responsible for maintaining, servicing, and repairing construction plant and equipment used across active project sites. Responsibilities include: Inspecting plant machinery for faults, wear, and safety issues Carrying out planned servicing and preventative maintenance Diagnosing mechanical and hydraulic faults Repairing excavators, dumpers, rollers, and associated plant Completing breakdown repairs on site when required Ensuring plant complies with safety standards and regulations Keeping service records accurate and up to date Coordinating with site teams to minimise downtime Ordering parts and managing stock levels where necessary Supporting plant mobilisation and demobilisation between sites Conducting pre-use inspections and reporting defects Maintaining a clean and organised workshop or service vehicle Summary This is a practical, stable role for a Plant Fitter who values consistent work, proper organisation, and a contractor that plans ahead. It suits someone experienced with construction plant who wants responsibility, variety of equipment, and long-term employment rather than short-term site cover. Contact Mark at Up Front Recruitment for more information.
Workshop Plant Fitter Croydon £45,000 basic Vehicle (optional), 29 days holiday, overtime rate 1.5x, pension scheme and more Overview We are seeking a skilled and dedicated Workshop Plant Fitter to join our team. This role involves working on a wide range of plant machinery, including excavators, dumpers, rollers, telehandlers, and more. If you are passionate about machinery, have a strong technical background, and are looking for a rewarding career with excellent benefits, we encourage you to apply. Responsibilities Conduct maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, rollers, telehandlers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults. Perform inspections to ensure machinery is in optimal working condition and complies with safety standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Collaborate with the team to ensure efficient workflow and timely completion of tasks. Adhere to health and safety regulations at all times. Provide occasional support for field-based repairs when required. Qualifications Proven experience as a Plant Fitter or similar role, with expertise in working on plant machinery. Strong knowledge of mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering are desirable. Ability to read and interpret technical manuals and schematics. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. A valid driving license is preferred. Day-to-Day Work a 45-hour week, Monday to Friday, from 7:00 AM to 5:00 PM. Perform routine maintenance and emergency repairs on a variety of plant machinery. Collaborate with colleagues to ensure the smooth operation of the workshop. Maintain a clean and organized workspace. Occasionally assist with field-based repairs as needed. Benefits Competitive basic salary ranging from £36,000 to £45,000, depending on experience. Overtime opportunities available at 1.5x the standard rate. Generous holiday allowance of 29 days. Company vehicle can be supplied if required. Opportunity to work with a diverse range of machinery and develop your skills further. Supportive and professional working environment. If you are a motivated and experienced Workshop Plant Fitter looking for a new challenge, we would love to hear from you. Apply today to join our team and take the next step in your career! SER-IN
12/02/2026
Full time
Workshop Plant Fitter Croydon £45,000 basic Vehicle (optional), 29 days holiday, overtime rate 1.5x, pension scheme and more Overview We are seeking a skilled and dedicated Workshop Plant Fitter to join our team. This role involves working on a wide range of plant machinery, including excavators, dumpers, rollers, telehandlers, and more. If you are passionate about machinery, have a strong technical background, and are looking for a rewarding career with excellent benefits, we encourage you to apply. Responsibilities Conduct maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, rollers, telehandlers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults. Perform inspections to ensure machinery is in optimal working condition and complies with safety standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Collaborate with the team to ensure efficient workflow and timely completion of tasks. Adhere to health and safety regulations at all times. Provide occasional support for field-based repairs when required. Qualifications Proven experience as a Plant Fitter or similar role, with expertise in working on plant machinery. Strong knowledge of mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering are desirable. Ability to read and interpret technical manuals and schematics. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. A valid driving license is preferred. Day-to-Day Work a 45-hour week, Monday to Friday, from 7:00 AM to 5:00 PM. Perform routine maintenance and emergency repairs on a variety of plant machinery. Collaborate with colleagues to ensure the smooth operation of the workshop. Maintain a clean and organized workspace. Occasionally assist with field-based repairs as needed. Benefits Competitive basic salary ranging from £36,000 to £45,000, depending on experience. Overtime opportunities available at 1.5x the standard rate. Generous holiday allowance of 29 days. Company vehicle can be supplied if required. Opportunity to work with a diverse range of machinery and develop your skills further. Supportive and professional working environment. If you are a motivated and experienced Workshop Plant Fitter looking for a new challenge, we would love to hear from you. Apply today to join our team and take the next step in your career! SER-IN
We are looking for a qualified Plant Fitter/Maintenance Mechanic to repair and maintain machinery of up to 30t. for a leading civils contractor. The successful applicant will be based from home and a van and phone will be provided. You will cover sires across Cambridge, Peterborough and Nottingham so you need to be happy with travelling. Role Overview An experienced Plant Maintenance Mechanic is required to maintain, service and repair a wide range of construction plant and machinery. The role is key to ensuring plant availability, minimising downtime and supporting site teams to deliver projects safely and efficiently. Key Responsibilities Carry out routine servicing, inspections and preventative maintenance on plant and machinery Diagnose faults and carry out mechanical, hydraulic and basic electrical repairs Maintain and repair a range of plant including (but not limited to): excavators, dumpers, rollers, telehandlers, breakers and small tools Attend breakdowns on site and carry out effective repairs in a timely manner Complete service records, inspection sheets and defect reports accurately Liaise with site managers, supervisors and plant hire companies as required Maintain a clean, safe and organised workshop and work environment Ensure all work is carried out in line with company health & safety procedures Skills & Experience Required Proven experience as a Plant Maintenance Mechanic, Plant Fitter or similar role Experience working with construction plant and groundworks equipment Ability to fault-find and work independently under pressure Full UK driving licence (essential) Relevant qualifications (e.g. NVQ Level 2/3 in Plant Maintenance or equivalent) preferred but not essential with proven experience
11/02/2026
Full time
We are looking for a qualified Plant Fitter/Maintenance Mechanic to repair and maintain machinery of up to 30t. for a leading civils contractor. The successful applicant will be based from home and a van and phone will be provided. You will cover sires across Cambridge, Peterborough and Nottingham so you need to be happy with travelling. Role Overview An experienced Plant Maintenance Mechanic is required to maintain, service and repair a wide range of construction plant and machinery. The role is key to ensuring plant availability, minimising downtime and supporting site teams to deliver projects safely and efficiently. Key Responsibilities Carry out routine servicing, inspections and preventative maintenance on plant and machinery Diagnose faults and carry out mechanical, hydraulic and basic electrical repairs Maintain and repair a range of plant including (but not limited to): excavators, dumpers, rollers, telehandlers, breakers and small tools Attend breakdowns on site and carry out effective repairs in a timely manner Complete service records, inspection sheets and defect reports accurately Liaise with site managers, supervisors and plant hire companies as required Maintain a clean, safe and organised workshop and work environment Ensure all work is carried out in line with company health & safety procedures Skills & Experience Required Proven experience as a Plant Maintenance Mechanic, Plant Fitter or similar role Experience working with construction plant and groundworks equipment Ability to fault-find and work independently under pressure Full UK driving licence (essential) Relevant qualifications (e.g. NVQ Level 2/3 in Plant Maintenance or equivalent) preferred but not essential with proven experience
