17 jobs found

Design Manager required to work for Principal Contractor JV on High Speed Rail Major Tunnels Programme. Contract initially up to end of Oct 2026 - Inside IR35 Old Oak Common/North Acton - Hybrid Working Arrangements Skillset: Design Management, Fitout, Engineering, Construction. Role Brief: This Design Manager will manage the Stage 5 asset design and be responsible for leading and coordinating all design and disciplines associated with a particular asset, facilitate the delivery of the designs, ensuring the design is technically assured, delivered to programme and coordinated between design disciplines. Candidates for the role must have a proven experience of large-scale civil engineering projects. Your previous/background experience will likely have been within Design and Engineering Project Management. You will have a good knowledge of construction techniques and processes across shafts and head house structures, above and below ground with a focus on shaft fit-out and architectural design, with an appreciation of both temporary and permanent MEP as well as rail systems activities. Main Responsibilities -Leading on all things design for their particular asset, liaising with the Stage 4 close out team and assisting elsewhere when required. -Management for their asset of all Design activities related to the shaft fit out incl. blockwork, fire-proofing, steelwork, doors, hatches, drainage, etc. and architectural design of the shafts and headhouses incl. misc. steel works, façade/cladding, roofing systems. You will also be involved with the integration of MEP systems. -Liaison with design consultant, MEP team, Design Integrator, Engineering team, Construction team, QA team, Commercial team, Planning team and Cost control to provide relevant design input as required. -Review Technical Queries (TQs)/RFIs, FCDs and NCRs as required, as well as Material Compliance Records (MCRs). -Management of Design integration and change control during construction. -Promote best practice in safety management through application of risk assessment, and ensuring CDM 2015 regulations are considered in the design and challenging the designer when required. Experience Required: -Educated to degree level or higher (preferably BEng or higher (MEng, MSc) and hold a relevant professional qualification. -Experience in project-based design and management across all project stages. -Good knowledge of construction of shafts and headhouses with focus on fit-out and architectural elements, along with MEP interfaces. -Experience of large complex projects where involvement with multi-discipline integration was required. -Good understanding of the NEC contract and have experience in its application. -Have an appreciation of BIM and the 3D environment, and have an understanding of digital engineering in design, construction and handover phases. -Thorough understanding of managing design related project risks. -Thorough understanding and application of the CDM Regulations 2015. -Strong understanding of Engineering Principles and extensive technical knowledge of construction techniques and best practices

Assistant Design Manager (MEP) Location: North East London / Remote / Site-based Working Pattern: 3 days Office/Site, 2 days Work From Home (WFH) Reporting to: Design Manager / Senior Design Manager Role Overview On behalf of my client , a leading specialist in mechanical and electrical building services, I am seeking a technically minded Assistant Design Manager to join their pre-construction and delivery team. This role is a strategic hire designed to support the management of the design process across a diverse portfolio of high-value residential and commercial projects. The successful candidate will possess a strong MEP background and the ability to navigate the complexities of design coordination. My client offers a balanced hybrid working model, allowing for two days of remote work while ensuring high-level collaboration across their North East London office and various site locations. Key Responsibilities Design Coordination: Support the management of the design process from RIBA Stage 3 through to construction, ensuring all MEP services are fully integrated with the wider building fabric. Technical Compliance: Conduct thorough reviews of drawings, specifications, and technical submittals to ensure adherence to British Standards, Building Regulations, and client requirements. RFI & Tracker Management: Oversee the Request for Information (RFI) process and maintain live design trackers to ensure the site teams have the most current information. Stakeholder Liaison: Act as a key point of contact between external consultants, architects, and the internal project delivery team to resolve technical discrepancies. Site Integration: Attend regular site visits to ensure the physical installation aligns with the approved design and to troubleshoot any on-site coordination issues. Candidate Profile MEP Expertise: You must have a demonstrable background in Mechanical, Electrical, or Public Health engineering (ideally with a sub-contractor or consultancy). Experience Level: Ideally 2 5 years of experience in a technical or design-focused role within the construction industry. Software Proficiency: Familiarity with AutoCAD and BIM/Revit workflows is essential for reviewing and coordinating models. Communication: Strong verbal and written communication skills, with the confidence to challenge design decisions and present solutions in Design Team Meetings (DTMs). Qualifications: A degree or HNC/HND in Building Services Engineering or a related technical discipline. Benefits of the Role Hybrid Flexibility: A formalized 2-day WFH policy to provide autonomy and work-life balance. Clear Progression: My client is committed to internal promotion; you will be mentored directly by a Senior Design Manager with a view to taking full project ownership. Project Variety: Gain exposure to complex energy centers, large-scale residential schemes, and innovative HVAC technologies. For more information, contact Matt Jones on (phone number removed)

Job Title: MEP Construction/Project Manager (FTC) Location: London Salary: 70,000 to 75,000 On behalf of a leading UK property developer, we are supporting the appointment of an experienced MEP Construction/Project Manager on a Fixed Term Contract to lead the delivery of building services across a prestigious, high-value central London development. This role will take ownership of all Mechanical, Electrical and Plumbing (MEP) construction and installation activities, working closely with senior leadership, project stakeholders, consultants and specialist supply chain partners to ensure safe, commercially sound and high-quality project delivery. Key Responsibilities Oversee all MEP building services delivery for the development, operating with a commercially focused and autonomous approach Act as a key member of the project delivery team, supporting a collaborative and proactive management culture Manage relationships across consultants, designers, main contractors and specialist subcontractors to ensure successful installation delivery Provide technical and commercial guidance to the project team, supporting procurement of contractors and specialist trades Ensure the highest standards of Health & Safety, welfare and sustainability in line with CDM regulations and company requirements Liaise with corporate Health, Safety, Environment and Quality teams to maintain compliance and best practice Identify, manage and mitigate project risks throughout the construction lifecycle Lead commissioning, testing and validation of all MEP systems to achieve successful project handover Act as the interface between the project and statutory utilities to ensure timely service connections Review technical designs, specifications and engineering solutions to ensure optimal project outcomes Participate in tender reviews, contractor selection and package award processes Track project progress, implement action plans and maintain programme performance Support procurement of specialist materials and high-specification equipment where required Coordinate handover with building management teams, including review of maintenance and operational strategies Experience Required Proven experience as an MEP Construction/Project Manager within a recognised UK contractor or developer Experience delivering complex projects with significant MEP value Background within high-end residential, hospitality, heritage or technically complex developments around the 100M mark or higher Strong commercial awareness and experience managing project financial performance Excellent understanding of UK construction processes, regulations and industry best practice Experience managing commissioning, validation and project handover phases Familiarity with BIM environments and review of O&M documentation Strong stakeholder management and supply chain coordination experience CSCS certification preferred; NEBOSH or equivalent Health & Safety qualification advantageous If this could be of interest, please drop me an email to (url removed) or call me at (phone number removed) Alec Lintern Recruitment Consultant TDA Telecoms

Senior Design Engineer - Data Centre Project London Docklands Up to £70,000 + Benefits The Opportunity We are currently seeking an experienced Senior Design Engineer to join a high-performing project team delivering a major data centre development in London Docklands. This is an opportunity to work on a high-profile, mission-critical scheme for blue-chip clients within a dynamic and technically challenging environment. The successful candidate will play a key role in managing the end-to-end design and coordination of Civil, Structural, and Architectural (CSA) packages. Reporting To Senior CSA Project Manager Purpose of the Role To lead and manage the design development and delivery of CSA packages across the full project lifecycle, ensuring compliant, buildable, and optimised design solutions that meet client expectations and programme objectives. This role is integral to delivering technically robust building solutions while maintaining the highest standards of quality, safety, and performance. Key Responsibilities Lead, coordinate, and oversee the design development of all CSA packages. Ensure technical compliance with project specifications, statutory requirements, and quality standards. Evaluate design solutions for buildability, cost-efficiency, innovation, and practicality. Manage the lifecycle of design packages from initial review through estimation, procurement, planning, and site execution. Proactively engage with clients, consultants, subcontractors, and regulatory authorities. Support collaboration between CSA and MEP disciplines to resolve cross-discipline design challenges. Monitor design progress, identify risks early, and implement mitigation strategies. Provide technical input across all project stages, including value engineering and constructability reviews. Oversee the production of high-quality technical documentation, drawings, and reports. Participate in and lead project meetings, design reviews, and site inspections. Ensure compliance with all health, safety, and environmental regulations. Candidate Requirements Minimum 5+ years' experience in CSA design and delivery on large-scale, complex building projects. Prior exposure to data centre or mission-critical projects is highly desirable. Bachelor's degree in Civil, Structural, Architectural Engineering or related discipline (minimum). Chartered status with a recognised professional body (e.g., ICE, IStructE) highly desirable. Strong knowledge of UK building regulations, codes, and statutory requirements. Proficiency in AutoCAD, Revit, BIM tools, and relevant design software. Demonstrated ability to manage multiple design packages across all phases. Proven project management capability including planning, reporting, and risk management. Strong stakeholder engagement and communication skills. Career Development The organisation operates a structured professional development and mentoring programme. High-performing individuals can progress through a clearly defined pathway from: Senior CSA Design Engineer Design Manager Project Manager Senior Project Manager Why Apply? Work on a flagship data centre project in London Docklands Join a business delivering high-profile projects for blue-chip clients Technically stimulating and collaborative working environment Clear career progression structure Competitive salary up to £70,000

Senior Design Manager Location: Hackney, London Level: Senior Design Manager Sector: Residential / Regeneration / High-Risk Buildings (HRB) £80k - £95k + Package Overview We are working alongside a leading contractor who is seeking an experienced and proactive Senior Design Manager to oversee design delivery across multiple residential High-Risk Building (HRB) schemes in Hackney. This senior role requires strong leadership capability, exceptional technical understanding, and deep knowledge of the Building Safety Act (BSA) , including Gateways and the Golden Thread requirements. The successful candidate will provide strategic design leadership, ensuring fully compliant and expertly coordinated design information throughout all project stages. Key Responsibilities Leadership & Design Team Management Lead and manage multidisciplinary design teams, ensuring collaboration, clear communication, and timely delivery of design information. Chair design meetings, set priorities, delegate tasks, and oversee performance of Design Managers, Coordinators, and project consultants. Mentor and support junior team members, promoting a culture focused on quality, compliance, and continuous improvement. Set design strategy and drive excellence across architectural, structural, MEP, and façade disciplines. HRB & BSA Compliance Ensure all design output meets the full requirements of the Building Safety Act , including Gateways 2 and 3, responsibilities, competence requirements, and accountable person obligations. Maintain, oversee, and quality-check the Golden Thread of information, ensuring accurate record keeping and digital information management. Coordinate closely with Building Control, Fire Engineers, Principal Designers (CDM/BR), and safety specialists to secure approvals. Lead the development and submission of Safety Case Reports, Fire & Emergency Files, and change control documentation. Design Coordination & Technical Oversight Oversee and approve all design packages across disciplines, ensuring compliance with regulations, planning conditions, and project requirements. Lead design risk assessments, ensuring early identification of risks and implementation of mitigation strategies. Manage design programmes, trackers, and release schedules in line with procurement and construction sequencing. Review and sign off technical details, façade designs, fire strategies, MEP coordination, structural solutions, and subcontractor packages. Construction & Delivery Support Work directly with construction teams to ensure buildability, logistics alignment, and efficient sequencing. Resolve complex technical challenges during design and delivery phases. Support tendering and procurement by reviewing technical submissions, clarifying design responsibilities, and challenging non-compliant proposals. Ensure site teams have accurate, coordinated, and up-to-date technical information at all times. Stakeholder Engagement Act as a senior technical representative in client meetings, consultant workshops, authority consultations, and internal leadership sessions. Build strong relationships with project partners and stakeholders, ensuring clarity, transparency, and consistent communication. Present design progress updates, compliance reports, and risk assessments to clients and senior leadership. Experience & Skills Required Essential Proven experience as a Senior Design Manager or an experienced Design Manager ready to step up. In-depth understanding of High-Risk Buildings (HRBs) and the technical, regulatory, and fire safety considerations involved. Strong working knowledge of the Building Safety Act , including Gateways, Building Safety Case principles, and the Golden Thread. Demonstrated ability to lead multidisciplinary design teams on multi-storey residential projects. Expert understanding of building regulations, construction methodology and fire safety design. Strong leadership, communication, coordination, and stakeholder management skills. Desirable Experience on London-based residential or regeneration schemes. Familiarity with digital information management platforms (Asite, ACC, Viewpoint, BIM platforms). Professional membership with RIBA, CIAT, CIOB, ICE, or similar.

Required background: Similar position with experience in new build residential schemes An exciting opportunity for an experienced BIM Manager to lead digital delivery within a newly established London & Southern regional office. This respected building services consultancy is delivering major new-build residential and mixed-use projects across London and the South East and is seeking a BIM leader to define and drive regional digital standards. The Role Develop and implement BIM standards and workflows Lead model coordination across large-scale projects Oversee clash detection and multidisciplinary coordination Ensure compliance with ISO 19650 Produce and manage BIM Execution Plans Mentor engineers and support digital best practice About You Strong BIM leadership experience within building services Advanced Revit (MEP) capability Experience with Navisworks (or similar) Strong understanding of ISO 19650 and BIM Level 2 Experience on large-scale residential/mixed-use projects (desirable) Why Join? Influence the digital direction of a growing regional office Work on high-profile London schemes High visibility within an established consultancy Genuine long-term progression An opportunity to shape digital delivery in a growing regional team not just manage models.

A leading MEP subcontractor with a turnover exceeding £250M + is seeking an Intermediate MEP BIM / Revit Technician to join their growing team in Central London. This is an excellent opportunity to work closely with the department manager, supporting major projects across the commercial, industrial, and infrastructure sectors. The successful candidate will play a key role in delivering CAD and BIM services to the mechanical and electrical odepartment, while also overseeing CAD subcontractors and ensuring drawing programmes are delivered on time. Responsibilities include: Providing all CAD and BIM services to the mechanical and electrical operations department. Managing all CAD subcontractors engaged on behalf of the company. Producing and issuing a drawing release programme at the outset of each project. Monitoring drawing release programmes throughout projects to ensure deadlines are met. Preparing fully coordinated CAD drawings, schematics, and record drawings. Ensuring mark-up drawings are returned from site teams promptly to allow record drawings to be completed for handover. Assisting estimators during tendering by advising on and pricing CAD requirements. Obtaining and managing subcontractor quotations for CAD work when in-house workload requires additional support. Requirements: Strong knowledge of MEP building services and relevant bureaus. Proficiency in Revit / BIM systems Proven ability to produce coordinated drawings and schematics. Experience in managing drawing release programmes and subcontractor deliverables. Strong organisational and communication skills. Previous experience within commercial, industrial, or infrastructure projects advantageous. This position offers the chance to work with a highly regarded subcontractor on landmark projects, with opportunities for career development and progression. Full time office based position + a geneours package on top of basic salary. Please apply below if you meet the criteria and would like to find out more.

The Building Services Manager role offers an exciting opportunity for an experienced professional to oversee the MEP systems for a prestigious construction project in North London. Reporting directly to the client, you will be responsible for managing and leading the on-site MEP team, coordinating with subcontractors, design consultants, and commercial managers to ensure the successful delivery of the project. From the early pre-construction stage, you will be involved in procurement and design, providing valuable input to optimize the MEP systems and align them with the client's requirements and sustainability goals. Your strong leadership and motivational skills will be essential in setting an exemplary standard for the entire project team, promoting the company's culture and core values. You will be tasked with developing the MEP subcontractor tender strategy, preparing scopes of work, and assisting the commercial team with the bidding and analysis process. Ensuring compliance with the client's specifications and implementing Building Information Modeling (BIM) will also be key responsibilities. Throughout the installation and completion phases, you will manage all necessary approvals, from drawings and technical submissions to mock-ups and functional design descriptions. Your deep understanding of MEP design principles and project delivery experience will be crucial in overseeing the work of the subcontractors and coordinating with the client and design team to achieve a successful and timely handover of the MEP systems. The ideal candidate for this role will possess exceptional people management and leadership abilities, with a proven track record of managing multi-discipline MEP subcontractors on projects exceeding 30 million in value. A strong commercial and financial acumen, along with the ability to contribute to value engineering, will be highly valued. Prior experience in construction management would be an added advantage. In return, the successful applicant will be offered a competitive salary ranging from 80,000 to 90,000, depending on their level of experience, along with a comprehensive benefits package, including a discretionary annual bonus, company pension contribution, private medical coverage, and various flexible benefits. This is an excellent opportunity to join a growing business with a significant presence in the South of England and contribute to the delivery of a high-profile construction project.

Job Title: Technical Manager *1 Mechanical Bias and 1 Electrical Bias needed* Location: London Job Type: Permanent Salary: £65,000 We have a new opportunity for an M&E Technical Manager to join our Construction London team to be responsible for the functional leadership and management of design resource on projects in the area from winning the tender through to completion. Typical Project Value: £50m to £250m Typical Projects: Residential, Offices, Schools Etc. 25 Days Holiday £6k Car Allowance Flexi £250 to spend on benefits (or cash) 10% Bonus based on performance Work from home flexibility Job Description; Responsible for the technical performance of allocated bids & projects Responsible for the management of MEP & BIM design on allocated projects Responsible for ensuring reporting technical performance in a disciplined and compliant manner Manage design risk & opportunities with a robust and transparent approach Responsible for MEP Designing the Promise compliance across allocated bids & projects Responsible for CDM & Designing for Safety compliance across allocated bids & projects Responsible for Operating Framework compliance across allocated bids & projects Implement regional technical strategy Promote implementation of the Technical Excellence Centre in the region Solve technical & design problems and make decisions that have a major impact on WBS/WCG Challenge bid & project performance Maximise technical & design performance of all allocated bids & projects Staff and employee wellbeing Undertake key activities with discipline and rigour Key Experience necessary; Minimum 5 years' experience in a similar technical and/or design position, ideally including MEP Contractor Demonstrable experience of successful design & technical delivery across multiple project typologies/sectors/values Good Leadership & collaboration skills Good understanding of technical & commercial risk management and opportunity creation Comprehensive understanding of design Management Effective communication skills with experience in stakeholder management both internal and external Good understanding of MEP testing & commissioning Degree/HND qualified, Incorporated Engineer, ACIBSE and/or TMIET If you're looking for new place to either learn or continue your trade, click APPLY now, and we will be in touch with the applicants who meet the requirements! Point Of Contact Drew Albert, MCG (phone number removed)

Job Title: Technical Manager *1 Mechanical Bias and 1 Electrical Bias needed* Location: London Job Type: Permanent Salary: £65,000 We have a new opportunity for an M&E Technical Manager to join our Construction London team to be responsible for the functional leadership and management of design resource on projects in the area from winning the tender through to completion. Typical Project Value: £50m to £250m Typical Projects: Residential, Offices, Schools Etc. 25 Days Holiday £6k Car Allowance Flexi £250 to spend on benefits (or cash) 10% Bonus based on performance Work from home flexibility Job Description; Responsible for the technical performance of allocated bids & projects Responsible for the management of MEP & BIM design on allocated projects Responsible for ensuring reporting technical performance in a disciplined and compliant manner Manage design risk & opportunities with a robust and transparent approach Responsible for MEP Designing the Promise compliance across allocated bids & projects Responsible for CDM & Designing for Safety compliance across allocated bids & projects Responsible for Operating Framework compliance across allocated bids & projects Implement regional technical strategy Promote implementation of the Technical Excellence Centre in the region Solve technical & design problems and make decisions that have a major impact on WBS/WCG Challenge bid & project performance Maximise technical & design performance of all allocated bids & projects Staff and employee wellbeing Undertake key activities with discipline and rigour Key Experience necessary; Minimum 5 years' experience in a similar technical and/or design position, ideally including MEP Contractor Demonstrable experience of successful design & technical delivery across multiple project typologies/sectors/values Good Leadership & collaboration skills Good understanding of technical & commercial risk management and opportunity creation Comprehensive understanding of design Management Effective communication skills with experience in stakeholder management both internal and external Good understanding of MEP testing & commissioning Degree/HND qualified, Incorporated Engineer, ACIBSE and/or TMIET If you're looking for new place to either learn or continue your trade, click APPLY now, and we will be in touch with the applicants who meet the requirements! Point Of Contact Drew Albert, MCG (phone number removed)

CLIENT: Operating nationally our client is a specialist mechanical and electrical contractor. They are responsible for delivering high quality design & build installations across a variety of sectors. As a result of continued growth they are looking for a Mechanical Design Manager to join their London Team. Working closely with the divisional director the successful candidate will be responsible for developing of detailed, construction worthy designs. Projects range from £1M to £15M MEP within healthcare, commercial, education and residential sectors. Role: Mechanical Design Manager Location: London Salary: £75,000.00 + Package THE ROLE * Manage external consultants, main contractors and clients to develop MEP designs within budget and on time. * Verification of external consultants design’s including detailed analysis of IES, * Revit and Hevacomp output data. * Verification of external Consultants design data including review of IES and Revit models. * Development of concept designs and management of key deliverables. * Attendance of client and design team meetings. * Preparation of excel spreadsheets and power point presentations. * Develop new and existing business opportunities. ESSENTIAL * Highlighted motivated with excellent communication skills. * Excellent planning, organisational and time management skills. * Must have the ability to work alone with minimal supervision. * Client facing attributes and presentation experience will be expected. * Have a flexible attitude and be comfortable working on a number of projects simultaneously. QUALIFICATIONS / SKILLS * Minimum HNC /HND in building services engineering or equivalent. * Minimum 6 years’ experience in a Mechanical Services design role either consultancy or contractor based with a bias towards design and build contracts. * Fully proficient with Microsoft Office suite. * Membership of CIBSE / IHEEM preferred but not essential. * Background in healthcare and education sectors with full understanding of HTM, HBN and Building Bulletin standards preferred. * Working knowledge of IES and Revit design software. * Experience in delivering projects to BIM level 2

Brief Outline: A major MEP contractor require a Project manager for projects throughout the Benelux region. About our Client: My Client has over 128 years’ experience as a world class engineering contractor. Their core divisions include Mechanical Engineering, Electrical Engineering, Sprinkler and Fire Protection. Some of the other services the provide include Waste to Energy (BioEnergy), Specialist Lift, Off Site Fabrication, Technical Support Services, Maintenance, Asset Management, BIM (Building Information Modelling) and Geo-Surveying. About the Role: * They require a proven. MEP Project manager for major datacentre projects in the BENELUX region * The role will be 17 days on and 4 days off with flights provided home. * There will also be an overseas allowance paid * The role will suit a dynamic individual who has experience of commissioning/closing out of a project. * Overall project value in excess of £40M. Role / Requirements: * MEP Project manager for BENELUX projects * Responsible for supporting the growth and commercial management of the division * Happy to work abroad * 10+ years management experience required * Construction related experience essential * Experience in planning major projects * Strong Contractually * Excellent communication and organisation skills essential * Excellent IT skills essential

Brief Outline: A major MEP contractor require a Commercial manager for projects throughout the Benelux region. About our Client: My Client has over 128 years’ experience as a world class engineering contractor. Their core divisions include Mechanical Engineering, Electrical Engineering, Sprinkler and Fire Protection. Some of the other services the provide include Waste to Energy (BioEnergy), Specialist Lift, Off Site Fabrication, Technical Support Services, Maintenance, Asset Management, BIM (Building Information Modelling) and Geo-Surveying. About the Role: * They require a proven. MEP Commercial lead for major datacentre projects in the BENELUX region * The role will be 17 days on and 4 days off with flights provided home. * There will also be an overseas allowance paid * The role will suit a dynamic individual looking to progress their career with a leading engineering contractor. The successful candidate will work directly with the division manager to develop & expand the business through tendering & negotiation of new works. * The role will include client development, relationship management, tender submission & review, valuation preparation, margin review and ensuring projects are progressing according to budget and schedule. Role / Requirements: * MEP Commercial manager for BENELUX projects * Responsible for supporting the growth and commercial management of the division * Happy to work abroad * 10+ years management experience required * Construction related experience essential * Experience in planning major projects * Strong Contractually * Excellent communication and organisation skills essential * Excellent IT skills essential

Our Client is a highly successful International Construction Group who specialise in the delivery of prestigious hospital projects. To ensure timely delivery of several major hospital contracts in the Middle East are looking for an experienced BIM Manager to join their UK office. Purpose of BIM Manager Role: The role holder will oversee the Project Wide BIM delivery (across disciplines) and seek input from the BIM coordinators who look after BIM models of individual disciplines which involves working closely with external parties. The role holder will be responsible for the Architectural and Engineering models and ensuring that they are exchanged on a fortnightly basis for co-ordination with key stakeholders. The data/model exchange, clash detection and workflow processes are required to be recorded in an auditable manner and/or monitored for compliance against the BEP. To be successful in this role the role holder will need to ensure the maximum benefits of data exchange (e.g. early clash detection, up-to-date information flow etc). Specific Duties: Support the implementation of the Project BIM protocol. Liaise with and co-operate with Project Team Members in support of a collaborative working culture. Co-ordinate the whole design and modelling process by managing designers and lead with the clients engineer Manage three federated 3D models, one for each hospital; Structural, MEP and Architectural. Define and agree procedures for convening, chairing, attendance and responsibility for recording “information exchange process meetings”. Attend project and design team meetings as required.Co-ordinate and assess the 3D models for clashes by the design team and document effectively. Establish a Common Data Environment (BIM 360) including processes and procedures to enable reliable information exchange between Project Team Members, the Employer and other parties. Establish, agree and implement the information structure for the Information Model. Receive Information Model data from each BIM co-ordinator and validate compliance against BEP and advise on non-compliance. Agree and implement record keeping, archiving and audit trail for Information Model Carrying out Clash detection and Produce Clash reports. Report BIM Model progress to Client on a fortnightly basis. Manage weekly Clash Detection Reports Manage fortnightly BIM Model Progress Reports Initiate, agree and implement the Project Information Plan and Asset Information Plan Monitor day to day design aspects of the project/works section. Work closely with site team to ensure that models are current and correct for use on site. Uncompromising approach to ensure safety standards and targets are met and maintained. Promote a working environment that allows all team members to work to the best of their abilities. Utilise design resources effectively. Policies and Procedures Adhere to all company and departmental policy and procedure. Comply with statutory and company health and safety policies. Attend weekly/monthly departmental meetings as required. Ensure annual appraisals, job chats and job reviews are completed in line with company policy. Attend meetings and training as required. Ensure regular and appropriate communication with other departments to maintain a courteous and professional relationship. Attend work punctually. Maintain the highest standards of personal presentation and hygiene. Undertake any other reasonable tasks allocated by the Senior Management. Key Skills: Expert in Revit Design Management. Design Reporting and report writing. Managing healthcare design projects. Awareness/able to use P6 and Asta Power Projects. Awareness/able to use Aconex. Ability to deliver results on time, to a high quality and on budget. Able to quickly gain technical, behavioural and contextual elements of the project. Major construction health experience. Person Specification Proactive Collaborative approach to team working Personal drive for achievement Professional work ethic Ability to build strong relationships with people at all levels. Resilient Effective time management Able to prioritise to meet deadlines Logical approach to problem solving Available to travel overseas as and when required This job description covers the main objectives, responsibilities and authorities of this position at present. Where necessary, changes may be made from time to time involving like or integrated work. If you’re a BIM Manager looking for an exciting opportunity please feel free to call Robert Ferrari or email an up to date CV

Project: Facilities Management Integrator Job Title: Facilities / Minor Works – Project Manager – Reports to: Lifecycle Manager Location: Leatherhead based with regular travel to client sites throughout Greater London 2. Qualifications, Experience and Skills Qualifications: Essential: • Recognised understanding of building, electrical, mechanical engineering requirements within the built environment, project management experience across building fabric, M&E works • Health and Safety training i.e. IOSH Managing Safely, CSCS or equivalent • Hold, have held or eligible to apply for security clearance Desirable: • Professional qualification within FM or related discipline i.e. BIFM, CIBSE, RICs etc. • Experience with BIM (Building Information Modelling) and UNICLASS asset recording • Soft landings (BSRIA / Government services) • IOT Knowledge • CDM Experience • Awareness of RIBA plan of work 2013 • JCT – Form of contract experience Experience and Skills: Essential: • Project managing general building / MEP minor works projects within commercial or government asset portfolios to a value of £150k • Experience of analysing works specifications and drawing up project plans • Ability to work with integrated services procurement / commercial personnel in order to obtain quotes for works. • Experience of analysing tenders, and reporting findings back to the client • Experience of planning projects to include capture of lifecycle and asset data • Co-ordinating client forward works register and programmes of work • Experience of surveying and pricing • Experience of managing safe systems of work and permits • Good understanding in the management of asset data bases • Managing work orders through CAFM system • Experience of managing Health, Safety and Environmental management systems • Commercially aware with good negotiating skills • Excellent client facing skills with the confidence to deal with people at all levels • Capable of working independently and collaboratively as part of a wider team • Excellent communication, numeracy and presentation skills • Proven ability to deal with change • Excellent written communication skills including, project planning, report writing • Working knowledge of Share-point, Microsoft Word, Project, Excel and PowerPoint • Proven financial and commercial awareness • Ability to successfully manage time, plans and other related tasks • Ability to continuously meet targets and surpass expectations • An eye for detail and technically minded • Ability to work under pressure Desirable: • Experience of working in Facilities / Project Management • Government services – Minor Works Project Management experience • Experience of working in a secure environment • Knowledge of Maximo, Share point and concept systems • RIBA • Soft Landings 3. Core Responsibilities and Duties The Facilities / Minor Works – Project Manager will be responsible for ensuring the effective management of Minor Works projects from inception through to practical completion, to include but not limited to the management of - project planning, supplier management, Health & Safety, practical completion handover processes, defects liability, O&M Manuals, warranties, statutory requirements and client reporting. Managing the handover of new assets to the Asset Register and planned PPM work programmes The Project Manager will co-ordinate all MWP projects from start to completion and final handover This role will report directly into the Lifecycle Manager

Project: Facilities Management Integrator Job Title: Facilities / Minor Works – Lead Project Manager – Reports to: Lifecycle Manager Location: Leatherhead based with regular travel to client sites throughout Greater London 2. Qualifications, Experience and Skills Qualifications: Essential: • An industry recognised, building, electrical or mechanical engineering qualification within the built environment ( C&G, HNC, HND) and or a recognised project management qualification • Health and Safety training i.e. IOSH Managing Safely, CSCS or equivalent • Hold, have held or eligible to apply for security clearance • CDM Experience • RIBA plan of work 2013 process • JCT – Form of contract experience (Minor Works projects) Desirable: • Professional qualification within FM or related discipline i.e. BIFM, CIBSE, RICs etc. • Experience with BIM (Building Information Modelling) and UNICLASS • Soft landings (BSRIA / Government services) • IOT Knowledge Experience and Skills: Essential: • Lead manager of general building / MEP minor works projects within commercial or government asset portfolios to a value of £150k • Manage – client works specifications and drawing up project plans • Ability to work with procurement / commercial personnel in order to obtain quotes for works. • Experience of analysing tenders, and reporting findings back to the client • Experience of planning projects to include capture of lifecycle and asset data • Managing estate - forward works register and programmes of work • Experience of surveying and pricing • Managing safe systems of work and permits – relevant to MWP • Good understanding in the management of asset data bases and CAFM systems • Managing Health, Safety and Environmental management systems – relevant to MWP • Commercially aware with good negotiating skills • Excellent client facing skills, dealing with people at all levels • Ability to lead, inspire and motivate both client and staff • Capable of working independently and collaboratively as part of a wider team • Excellent communication, numeracy and presentation skills • Proven ability to deal with change • Excellent written communication skills including, project planning, report writing • Excellent working knowledge of Microsoft Word, Project, Excel and PowerPoint • Proven financial and commercial awareness • Be able to successfully manage time, plans and other related tasks • Be able to continuously meet targets and surpass expectations • An eye for detail and technically minded • Ability to work under pressure Desirable: • Experience of working in Facilities / Project Management • Government services – Minor Works Project Management experience • Experience of working in a secure environment • Knowledge of Maximo, Share point and concept systems • Soft Landings 3. Core Responsibilities and Duties The Facilities / Minor Works – Lead Project Manager will be responsible for ensuring the effective management of Minor Works projects from inception through to practical completion, to include but not limited to the management of - project planning, supplier management, Health & Safety, practical completion handover processes, defects liability, O&M Manuals, warranties, statutory requirements and client reporting. Managing the handover of new assets to the Asset Register and planned work programmes – relevant to MWP The Lead Project Manager will own the project’s from inception to completion and final handover to client This role will report directly into the Lifecycle Manager

Due to continued growth and an increase in workload my client based in the West End are currently looking for a Senior MEP CAD/Revit Technician to strengthen their MEP Design engineering and BIM production capability. My client was founded in the 70's and has grown from strength to strength opening 6 offices across the UK. The London office is expanding and with 30 multidiscipline engineers already in this office they are looking to increase this number by 20%. They have worked on projects from small refurbishments through to new build developments of commercial office space, hotels, retail, residential, historic, industrial, educational and healthcare. They also work for various global property management companies including Savills, Jones Lang LaSalle and Colliers international giving a good idea of my clients reputatuion in the market. Their varied sector/client reach does not stop there as they also deliver on listed buildings including the Globe Theatre, plus end users such as Disney This is a very important vacancy for my client as it means supporting the design engineers and leading the CAD team. You will be responsible for bringing your team up to speed with MEP REVIT as well as be the go to. You will be supporting the implementation of BIM practices and procedures as well as delivering work. This role also means you will be expected to mentor junior members of the team with your own technical expertise regarding MEP Revit. My client can offer a very progressive career path and the position will indeed evolve into an even more senior position eventually running the whole division. It is important you have experience with managing a team and the ability to communicate well as you will be the layer between the design engineers and your own team. Although my client has enjoyed taking on repeat business with clients already mentioned, they also attract many companies that require a quick turn around on particular projects due to their reliability and reputation for delivering on time. Therefore, organisation, project management and planning skills, including the ability to juggle multiple task would certainly be an advantage. My client always exceeds client expectations hence the reason why their project pipeline of repeat business is so long. You will be expected to have excellent time and cost management skills in order to plan and achieve delivery to the desired quality. Having visited the office which has excellent transport links with the Piccadilly line and Central Line nearby, as well as Euston station only a 15 min walk away, it is easy to understand why the majority of the employees have been there for more than 10 years. The environment is very friendly and supportive which is the main reason why the CAD manager, whom I spent a morning with, has been with the company for 30 years. You must be educated to HNC level or equivalent with demonstrable experience as a BIM coordinator and hold a professional qualification. It is vital that you have recent experience working in Building Services with MEP Revit experience in order for you to hit the ground running and lead your team. My client is more interested in your ability to do this than having many years of experience using CAD so it is essential that you know MEP Revit inside and out. A combination of the two would be ideal. For the right person my client offers excellent packages including paid travel to and from home to the office, contributory pension, private healthcare, 22 days annual leave rising to 26 days (1 extra day per year up to maximum of 26 days), life insurance, and membership of Perkbox