235 jobs found

Senior Overhead Line Design Engineer / Senior OHL Design Engineer UK Remote / Hybrid Transmission & Distribution Projects Salary: £dependent on experience + allowances + benefits Location: Hybrid / flexible working available in the UK Type: Full-time Senior Overhead Line Design Engineer (kV) ARCA Resourcing is partnering with a fast-growing specialist engineering consultancy operating across the UK high-voltage energy sector. This is a senior-level opportunity to take technical ownership of overhead line (OHL) design projects across 132kV-400kV transmission and distribution networks, while playing a key role in mentoring and developing junior engineers. If you re experienced in National Grid or DNO environments and want more influence over technical standards, project delivery and team development, this is worth a conversation. The Opportunity You ll lead the delivery of detailed OHL design packages across transmission and distribution schemes - ensuring safety, compliance, and technical excellence throughout. This role blends: Hands-on technical delivery Design governance and QA ownership Team leadership and mentoring Client and project interface You ll be joining a consultancy that is expanding its high-voltage design capability and investing in building a technically strong, scalable team. What You ll Be Doing Technical Design & Delivery Lead detailed OHL design (route & profile design, sag & tension, conductor selection, clearance analysis) Produce and review line schedules, plan & profile drawings, foundation layouts and technical reports Ensure compliance with ESQCR, CDM, National Grid and relevant BS/EN/IEC standards Contribute to design reviews, risk assessments and project planning Support tenders with technical input and design estimates Governance & Quality Maintain robust check/approve workflows Drive high standards in modelling, calculations and documentation Contribute to continuous improvement in tools and processes Leadership Line manage and mentor Junior Designers Support onboarding and technical training (PLS-CADD / PLS-Tower) Contribute to PDPs, competency assessments and succession planning Promote a collaborative, technically rigorous culture What We re Looking For: Essential: Degree or HNC/HND in Electrical, Civil, Mechanical Engineering (or similar) 7 10+ years experience in overhead line design (132kV 400kV) Strong working knowledge of OHL structures, mechanical loading and clearance requirements Experience producing and reviewing full design packages Proficiency in PLS-CADD, PLS-Tower or equivalent software Desirable: Experience working on National Grid or UK DNO projects Chartered Engineer status (or working towards) Experience mentoring or line managing engineers Why This Role Stands Out Genuine technical leadership position Exposure to major UK transmission infrastructure projects Opportunity to shape design standards and processes Hybrid flexibility across multiple UK offices Clear pathway toward Principal / Technical Authority level Apply Now If you are an experienced OHL Design Engineer ready to step into a senior, technically influential role, we would love to hear from you. Apply today through ARCA Resourcing. Please click the link to apply for immediate consideration!

VGC Group are currently recruiting for a Store Person/Labourer/General Operative to join our team on a major project in Leiston, Suffolk. We are looking for an experienced and reliable Store Person/Labourer/General Operative to manage the receipt, storage, and distribution of parts, materials, tools, and equipment. Basic pay rate: £14.59 per hour PAYE Shift- 12 days on, 2 days off. 12 hour days Start Date: ASAP, subject to gaining vetting Lodge pay is available for the successful candidate, if they meet the criteria. Essential Qualifications and Experience: CSCS Card HSE CITB Test Manual Handling Certificate Working at Heights Experience in a stores, warehouse, or logistics role Good understanding of stock control processes Ability to use basic IT systems (Excel, inventory software) Strong organisational skills and attention to detail Desirable Qualifications and Experience: Forklift licence (Counterbalance or Reach) Experience in engineering, automotive, heavy plant Knowledge of parts identification, tooling, or mechanical components Experience with barcode or stock management systems (ERP/WMS) Key Responsibilities: Receive, inspect, and record all incoming goods and deliveries Pick, pack, and issue materials to production, workshop, or site teams Maintain accurate stock levels using manual or digital inventory systems Label, organise, and store items safely and logically Carry out regular stock checks and assist in stocktaking activities Manage returns, damaged goods, and supplier discrepancies Ensure correct storage of hazardous materials where applicable Keep stores area clean, tidy, and compliant with company safety standards Assist with ordering low stock items and liaising with suppliers (if required) Support logistics activities such as loading/unloading and preparing dispatches Operate forklifts, pallet trucks, or lifting equipment (if trained/licensed) Follow instructions from senior mechanics and supervisors Complete simple paperwork such as job logs or parts checklists Adhere to all safety procedures and workshop standards Ensures stock accuracy, efficient workflow, and supports production or site operations with timely supply of parts and resources. Reporting to: Snr. Plant Manager If you are interested in this position, please apply with an up to date CV or contact the following: Madeleine Shipley (phone number removed) / (phone number removed) Kayleigh Keeling (phone number removed) / (phone number removed) Charlie Cottingham- (phone number removed) / (phone number removed) VGC Group is a leading labour supply provider, partnering with major contractors on major infrastructure and construction projects across the UK. We are committed to equality, diversity, and inclusion, and we support and develop our workforce throughout their careers. INDEN

VGC Group are currently recruiting for a Mechanical Fitter to join our team on a major project in Leiston, Suffolk. Basic pay rate: £24.14per hour PAYE Shift- 12 days on, 2 days off. 12 hour days Start Date: ASAP, subject to gaining vetting Lodge pay is available for the successful candidate, if they meet the criteria. As the Mechanical Fitter your responsibilities may include: -Carry out planned preventative maintenance and reactive repairs on a range of plant and mechanical equipment -Diagnose mechanical faults and complete repairs efficiently to minimize downtime -Inspect, service and maintain plant in accordance with manufacturer recommendations and project requirements -Ensure all maintenance activities are completed safely and inline with procedures -Follow LOTO and isolation procedures when carrying out maintenance activities -Complete maintenance records and report defects or equipment issues -Work collaboratively with supervisors, engineers and other personnel -Maintain high standards of housekeeping within the maintenance area -Promote and uphld strong health and safety culture The successful candidate will have: CSCS/JIB NVQ level 3 in Mechanical Fitting Abrasive Wheels Manual Handling LOTO training including- Electrical Safety Briefing, Mechanical Briefing and Isolation Procedures Previous experience maintaining construction plant or heavy machinery Strong fault finding and mechanical repair skills Ability to work alone and within a team Excellent communication skills and strong problem solving skills For the right candidate, this is a great opportunity to work on a major project on a long term basis. If you are interested in this position, please apply with an up to date CV or contact the following Madeleine Shipley - (phone number removed) / (phone number removed) Kayleigh Keeling - (phone number removed) / (phone number removed) Charlie Cottingham- (phone number removed) / (phone number removed) VGC Group is a leading labour supply provider, partnering with major contractors on major infrastructure and construction projects across the UK. We are committed to equality, diversity, and inclusion, and we support and develop our workforce throughout their careers. INDEN

Elvet Recruitment are recruiting for an experienced Civils Quantity Surveyor on behalf of an established civil engineering main contractor to deliver multi-million Yorkshire Water projects within the new 5-year AMP8 framework. This 500m+ turnover main contractor are a well-known name with several divisions of their business operating at a competitive level with larger tier 1 contractors. They are a key delivery partner for Yorkshire Water and framework holders for a number of Water clients nationwide for past several AMP frameworks. With a workload on the ground already & an expected influx of new projects in the coming months they're looking to add someone capable to their team. The opportunity will be present to lead projects through all phases for this QS - ECI's & through delivery to handover. Projects: Large complex civils & MEICA packages for Water Treatment Upgrades. Package values up to 20m. Duties as Quantity Surveyor: Coordinating with Senior Quantity Surveyor / Commercial Manager Liaison with Contracts Manager & site teams for up-to-date info Subcontractor procurement cradle to grave Undertake negotiations of Main Contract Final Accounts Commercial support & regular presence on sites Submission of payment applications Dispute resolution & avoidance Complete monthly CVR updates Cost control throughout Experience Required: Must have experience as Quantity Surveyor / Assistant Quantity Surveyor on Complex / Heavy Civil Engineering projects as PC Must have experience with various options of NEC3 or NEC4 contracts Ideally experience delivering works for Yorkshire Water or similar client. Ideally experience with MEICA (Mechanical or Electrical mainly) Must hold: CSCS and full driving license. Ideally hold an industry relevant Degree / HND etc. Remuneration: On offer is a salary of up to 60,000 (dependant on experience) plus Car allowance or car, discretionary annual bonus, fuel, 26 days annual leave with option to buy or sell more, healthcare, life insurance, 8% pension scheme and other benefits. For more info contact Andy Gray at Elvet Recruitment.

RG Setsquare is recruiting on behalf of one of the UK's most established and respected independent building services and facilities management contractors - a business with over a century of heritage, a blue-chip client base, and a strong reputation for technical excellence. We are looking for an experienced Maintenance Electrician to join their team on one of their flagship FM contracts in the North East. This is a predominantly Newcastle-based role, covering three to four commercial sites across the region as part of a well-structured and professionally managed contract. It's the kind of role that offers genuine stability - a long-standing contract, a supportive team, and a contractor that takes pride in the quality of its engineering. The salary sits between 38,000 and 40,000 depending on experience, with a company vehicle and overtime available on top. What You'll Be Doing Based primarily in Newcastle and covering a small cluster of sites across the North East, your responsibilities will include: Carrying out planned preventive maintenance (PPM) on electrical systems and associated building services equipment across your allocated sites Responding to reactive maintenance requests and electrical faults, diagnosing issues and restoring systems to full operation with minimal disruption to the client Inspection, testing, and certification of electrical installations in line with BS7671 (18th Edition) Maintaining LV distribution systems, DB boards, switchgear, and associated electrical infrastructure Carrying out minor electrical works, modifications, and small installation projects as required Ensuring all electrical systems are maintained in a safe, compliant, and operational condition at all times Completing PPM records, test certificates, and job reports accurately using the client's CAFM system Liaising professionally with client site contacts, building managers, and the wider engineering team Working safely and in full compliance with current health & safety legislation and company procedures What We're Looking For Essential: City & Guilds 2360 / NVQ Level 3 in Electrical Installation or equivalent recognised electrical qualification 18th Edition Wiring Regulations (City & Guilds 2382-18) Proven experience in an electrical maintenance role within a commercial FM or building services environment Sound working knowledge of LV systems, distribution boards, and general electrical plant Inspection and testing experience with confidence producing accurate test certificates Ability to work independently across multiple sites with strong self-management skills Full UK Driving Licence Professional, client-facing approach and clear communication skills Desirable (not essential): City & Guilds 2391 Inspection & Testing (or 2394/2395) IPAF / PASMA Experience with BMS or building controls systems Any additional mechanical or fabric skills that support a multi-skilled approach About Our Client Our client is one of the UK's leading independent building services companies, with specialist capabilities across mechanical and electrical engineering, facilities management, energy services, and water treatment. With over 100 years of trading history and a portfolio that spans corporate, public sector, healthcare, and high-profile private sector estates, this is a genuinely well-established and stable employer in the FM market. The business invests meaningfully in its people - with structured induction, an internal training Academy, funded qualifications, and a strong culture of internal progression. Full details will be provided to shortlisted candidates. The Package 38,000 - 40,000 per annum depending on experience Company vehicle provided Fuel card Overtime available - a genuine opportunity to increase take-home pay Company pension scheme Learning and development through the client's internal training Academy Funded qualifications and clear career progression pathways Long-term, stable employment on a flagship FM contract with one of the UK's most respected building services contractors How to Apply This vacancy is being managed by RG Setsquare. To be considered, please submit your CV via CV-Library. Shortlisted candidates will be contacted directly by our team with full information on the client, the contract, and next steps. RG Setsquare specialises in technical and FM recruitment across the UK, placing skilled trades and engineering professionals with leading contractors and service providers at every level. A flagship contract, a strong package, and a contractor that looks after its people. Apply now. RG Setsquare is acting as an Employment Agency in relation to this vacancy.

Options are looking for a mechanical mate / services installation engineer. You don't need to be experienced for this role as training is provided but having a mechanical / pipefitting background would be an advantage. Salary- 30k + use of company vehicle + holidays The company will need you to work locally in there yard in Southampton but you must be happy to travel. They have a lot of work coming up on both installations and a lot of service work on both waste and aggregates sites. These will be based in around the South London area as well as Crawley and Woking. You may need to stay overnight near the sites for one or two night a week. As it is service type work on pumps, pipe systems and control equipment. You will be expected to initially assist mechanical engineers, plumbers and pipefitters. Qualifications CSCS qualification an advantage. Must be willing to stay away 2 or 3 nights a week when called upon. Be fit and able to lift reasonable levels of pipe and fittings. Be able to use hand and power tools in order to complete tasks such as cutting and drilling. Good communication skills. Potential for career development in our small team. Salary would be set up on experience. Interested? Please apply with your CV!

Service Engineer Location: Washington, Tyne & Wear (Covering North East Region) Salary: Up to 38,000 DOE + Overtime + On-Call Allowance + Benefits About the Role An exciting opportunity has arisen for an experienced Generator Service Engineer to join a well-established and growing organisation within the power generation and plant hire sector. Working both from the Washington depot and at customer sites across the region, you will be responsible for servicing, maintaining, diagnosing and repairing a range of diesel generators and associated equipment. This is a varied, hands-on role offering excellent technical exposure, autonomy and career development opportunities. Key Responsibilities Carry out planned servicing, preventative maintenance and repairs on diesel generators and associated equipment. Attend customer sites to diagnose and rectify electrical and mechanical faults. Perform fault finding on AC/DC electrical systems, control panels and generator control systems. Complete inspections, pre-delivery inspections (PDIs) and equipment testing. Ensure all service documentation, maintenance records and job sheets are completed accurately. Liaise professionally with customers, providing technical advice and updates where required. Maintain company vehicle standards and complete daily vehicle defect reports. Participate in the out-of-hours on-call rota, including weekends and Bank Holidays. Ensure all work is carried out in accordance with company procedures and Health & Safety regulations. Support depot operations and assist with equipment preparation when required. About You To be successful in this role, you will ideally have: NVQ Level 3 or equivalent qualification in Plant Maintenance, Mechanical Engineering, Electrical Engineering or a related discipline. Previous experience working within the generator, plant hire, power generation or heavy equipment sectors. Strong mechanical and electrical fault-finding abilities. Experience working on diesel engines, generators, plant machinery or related equipment. Ability to prioritise workloads and manage service schedules effectively. Excellent communication and customer service skills. Ability to work independently and as part of a wider engineering team. Full UK Driving Licence (held for a minimum of 3 years). Desirable Experience Forklift Truck (FLT) licence. Experience with generator control systems and load testing. Previous field service engineering experience. What's on Offer Salary up to 38,000 depending on experience. Overtime opportunities. On-call allowance. Company vehicle. Ongoing training and development. Career progression opportunities. Stable and growing business environment. If you're a mechanically and electrically skilled engineer looking to join a respected organisation within the power generation sector, we'd like to hear from you. Apply today or contact Syntech Recruitment for a confidential discussion. Syntech Recruitment Ltd acts as an Employment Agency for permanent recruitment and an Employment Business for temporary placements. INDT

Associate Director, Office Lead - Building Services Location: Leeds Salary: Up to 85,000 + Comprehensive Benefits Package Our client, a leading multidisciplinary engineering consultancy, is looking to appoint an experienced Building Services Office Lead to establish, develop and grow its Building Services capability in Leeds and across the wider Yorkshire region. This is a rare opportunity to take on a strategic leadership role within a highly respected consultancy, helping to shape a regional team while delivering high-profile projects across multiple sectors. The Opportunity This role will suit an ambitious and commercially minded Building Services professional who is passionate about technical excellence, team development and business growth. Working within an established multidisciplinary environment, you will play a key role in expanding the regional Building Services offering, developing client relationships and leading the delivery of innovative engineering solutions. Projects span a diverse range of sectors including: Commercial Education Defence Energy Healthcare Advanced Manufacturing Transport Local Government Key Responsibilities Provide strategic leadership to establish and grow the Building Services team within the Leeds and Yorkshire market. Support recruitment, mentoring and development of technical staff. Build and maintain strong client relationships while identifying new business opportunities. Lead and coordinate MEP engineering input throughout all project stages. Take ownership of project delivery, including technical quality, programme management, commercial performance and client satisfaction. Drive technical excellence across mechanical, electrical and public health engineering disciplines. Contribute to bids, fee proposals and business development activities. Champion sustainable, low-carbon and energy-efficient design solutions. Help shape team culture, workload strategy and long-term regional growth plans. Requirements We are keen to speak with candidates who can demonstrate: Degree qualification in Building Services, Mechanical or Electrical Engineering (or similar). Chartered Engineer status. A proven track record of leading Building Services projects and developing client relationships. Strong technical expertise across mechanical, electrical and/or public health engineering. Experience managing multidisciplinary design teams and coordinating project delivery. Commercial awareness with experience preparing successful bids and fee proposals. Excellent leadership, communication and stakeholder management skills. Knowledge of BIM and digital design tools such as Revit and Navisworks. A strong understanding of UK Building Services regulations, sustainability standards and industry best practice. What's On Offer Opportunity to build and lead a regional Building Services team. High level of autonomy and influence within a growing business. Exposure to nationally significant multidisciplinary projects. Competitive salary and flexible benefits package. Hybrid working arrangements. Structured training and professional development opportunities. Excellent long-term career progression prospects. If you're an experienced Associate Director, Building Services Manager or Regional Lead looking to take ownership of a growing Leeds-based team, we'd be delighted to discuss this opportunity in confidence. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Plant Engineer Chelmsford £40,000 - £45,000 Basic + Company Vehicle + Overtime Experienced Plant Engineer required near Chelmsford with workshop and mobile responsibilities, excellent training, overtime, company vehicle and long-term career prospects. Join a well-established construction company with an excellent reputation for supporting customers across the construction sector. Investing heavily in training, diagnostic technology and employee development, this business offers long-term career opportunities alongside a supportive and experienced engineering team. Key Benefits of the Plant Engineer: £40,000 - £45,000 basic salary Company vehicle Overtime paid at time and a half after 39 hours 32 days holiday including bank holidays Manufacturer product training and ongoing development Company pension scheme Company sick pay scheme Life assurance (two times annual salary) Employee referral bonus Staff discount scheme Modern laptop diagnostics and specialist tooling Permanent, full-time position About the Role As a Plant Engineer , you will split your time between workshop and mobile service duties, maintaining, diagnosing and repairing a wide range of construction machinery. Using the latest diagnostic software and manufacturer support, you'll carry out servicing, fault finding, warranty work and customer repairs while delivering excellent service standards. Responsibilities include: Service and repair construction plant machinery. Diagnose hydraulic, mechanical and electrical faults. Complete planned maintenance and inspections. Carry out warranty, internal and customer repairs. Prepare accurate job reports and service documentation. Deliver high levels of customer service on-site and in the workshop. Maintain company equipment and comply with health and safety procedures. About You To succeed as a Plant Engineer , you'll have previous experience working on construction plant, agricultural machinery, heavy equipment or similar mobile machinery. You will be confident diagnosing hydraulic and electrical faults, comfortable using diagnostic software and able to work independently as well as within a team. You should also have: Full UK driving licence. Strong fault-finding and repair skills. Good communication and customer service abilities. A proactive approach and willingness to participate in a weekend rota when required. Good general level of health and fitness. To be successful in this role, you may have worked as a: Plant Fitter, Mobile Plant Engineer, Construction Plant Engineer, Construction Equipment Engineer, Heavy Plant Engineer, Service Engineer, Workshop Engineer, Agricultural Engineer, Field Service Engineer, Plant Service Technician. Next Steps If you're an experienced Plant Engineer looking for a secure role with excellent training, modern equipment and genuine career progression, apply today. Contact Georgina on (phone number removed)/(url removed) to find out more on this Plant Engineer role!

Your new company You will be joining a well-established Facilities Management operation delivering services across a schools contract in Bristol. The team provides a full range of services including mechanical and electrical engineering, cleaning, catering, and grounds maintenance, delivered on both a planned and reactive basis. Your new role As a Premises Manager, you will play a key role within the Commercial Property Maintenance team, supporting a portfolio of school sites in Bristol.This role is responsible for ensuring operational delivery is aligned with contract obligations, while maintaining high levels of customer satisfaction and site compliance. Key responsibilities include: Managing Premises Assistants and overseeing service delivery across the school sites Ensuring reactive and planned maintenance (PPM) activities are completed in line with SLAs and KPIs Maintaining compliance with all statutory requirements, including Health & Safety legislation Overseeing contractor activity and site operations Managing stock, materials, and budgets to maintain service performance Monitoring team performance and maintaining site standards Producing accurate operational and compliance reporting Supporting emergency planning, including adverse weather scenarios Participating in the on-call rota Working hours: Standard hours are 08:00 - 17:00. Flexibility required to cover Premises Assistant shifts during absence/holidays: Early shift: 06:00 - 15:00 Late shift: 10:00 - 19:00 On-call requirement: 1 week in every 7 (Friday to Thursday) 75 weekly on-call allowance Additional overtime paid for any call-outs Expected call-out frequency: approximately once every 7 weeks What you'll need to succeed To be successful in this role, you will need: Experience in Facilities Management service delivery Strong knowledge of Health & Safety legislation and COSHH IOSH Managing Safely qualification Experience working with building maintenance systems Strong communication skills across multiple stakeholder levels Ability to prioritise and manage a demanding and varied workload Must have a valid UK driving licence as you will be required to visit multiple sites when on call Proven ability to deliver work on time and within budget Knowledge of CAFM systems (Concept preferred) A proactive, "can do" attitude with the ability to work independently What you'll get in return Salary of up to 30,806 Permanent, full-time position (40 hours per week) Additional on-call allowance ( 75 per week) plus overtime for call-outs Opportunity to work within a structured Facilities Management environment Career development opportunities within a growing contract Exposure to a varied and high-impact schools portfolio Supportive team environment with progression opportunities What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Mechanical Maintenance Engineer (Mechanical Bias) Location: Solihull, West Midlands Salary: Competitive (dependent on experience) Hours: Monday Friday, 08 00 Call-Out: 1 in 4 rota (following successful completion of probation) The Opportunity Our client is seeking an experienced Mechanical Maintenance Engineer to join their Building Services team, supporting the maintenance of a prestigious commercial retail environment in Solihull. This is an excellent opportunity for a mechanically biased engineer with experience in Building Services or Facilities Management who enjoys working in a customer-focused commercial environment. The successful candidate will carry out planned preventative maintenance (PPM) and reactive maintenance, ensuring all mechanical and associated building services remain safe, compliant and fully operational. While this is primarily a mechanical role, applicants should have a basic understanding of electrical building services and be confident carrying out first-line fault finding where required. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive maintenance across mechanical and building services systems. Diagnose faults and repair mechanical plant and equipment to minimise downtime. Maintain and service mechanical pipework systems, pumps, motors, bearings, valves and HVAC plant. Complete repairs, replacements and minor installation works on plant, fixtures and fittings. Undertake general building maintenance, including basic plumbing and fabric repairs. Accurately complete maintenance reports and update work records using a digital maintenance management system. Ensure all work is completed in line with health & safety legislation and statutory compliance requirements. Maintain high standards of housekeeping within plant rooms and work areas. Work effectively with colleagues, contractors and site stakeholders to deliver an excellent maintenance service. Participate in a 1 in 4 out-of-hours call-out rota after successful completion of probation. Undertake overtime where required to support operational needs. Essential Requirements Level 3 Mechanical Engineering qualification (City & Guilds, NVQ or equivalent). Previous experience within Building Services, Facilities Management or commercial maintenance. Strong practical experience working with: Mechanical pipework Pumps, motors, bearings and valves HVAC plant and associated equipment Plumbing systems and general building services maintenance Experience carrying out both planned and reactive maintenance. Strong fault-finding and problem-solving skills. Good IT skills and experience updating digital maintenance records. Excellent communication skills and a professional, customer-focused approach. Desirable Multi-skilled with a basic understanding of electrical building services. Experience using CAFM or other maintenance management systems. Knowledge of statutory compliance and building maintenance best practices. Additional certifications such as: IPAF PASMA Asbestos Awareness Water Hygiene / L8 Awareness What's on Offer Competitive salary based on experience. Company vehicle or travel allowance (where applicable). Mobile phone, tablet, uniform and PPE. Overtime opportunities. Call-out allowance. Company pension scheme. Annual leave plus bank holidays. Ongoing training and career development. Support for additional industry-recognised qualifications. Long-term career prospects within a well-established Building Services organisation. If you're an experienced Mechanical Maintenance Engineer looking for your next opportunity within a professional and supportive environment, we'd like to hear from you. Apply today or contact our recruitment team for a confidential discussion.

Shift Engineer - Client Direct - Excellent Benefits - East London - 52,000 Exciting opportunity to work at a commercial campus situated by in Whitechapel. CBW are currently recruiting for a Shift Engineer to cover a commercial campus. The successful candidate will be electrically or mechanically qualified (C&G or NVQ) with a proven track record in commercial building maintenance. This is an ongoing permanent role and pays a yearly salary of 52,000 (including shift allowance) + excellent benefits based on qualifications and experience, inclusive of shift allowance. He or she will be required to carry out electrical, mechanical and fabric maintenance to the following; Key duties & Responsibilities Carry out all aspects of M&E maintenance Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution) Emergency lighting tests Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning) Water Treatment (Temperature checks / Not dosing) Plumbing - Unblocking toilets BMS System - Monitor (i.e. Hot & Colds) Escort / organise sub contractors Attend client meetings if required Ensure site log books are kept up to date Hours of work 4 on 4 off days & nights 07:00 - 19:00, 19:00pm - 07:00am Package Salary of 48,000 + 4,000 shift allowance 30 days holiday 14.5% employer pension contribution Season Ticket Loan On call payment + attendance payment if called out Requirements Electrically or mechanically qualified - City & Guilds Level 3 Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Multi-skilled Good communication skills Please send your CV to Charlie removed) or call (phone number removed) and ask for Charlie for more Information

Are you an experienced Signalling Contractor Engineering Manager (CEM) looking for your next Outside IR35 contract? Location: North East (Hybrid/Remote) Rate: £500 - £600 per day Contract: Long-Term IR35: Outside IR35 My client is expanding its delivery team and is looking for a Signalling CEM to support a growing portfolio of Capital Delivery and Works Delivery projects across the Eastern region. This is a long-term contract offering £500-£600 per day Outside IR35 , flexible working, and the opportunity to work on a diverse range of signalling renewals, life extension and enhancement schemes. The Role As the Contractor Engineering Manager (CEM) , you will take ownership of engineering assurance across multiple signalling projects, ensuring compliance with Network Rail standards while acting as the key technical interface between the client, project teams and subcontractors. You'll be involved throughout the project lifecycle, from tender and design through to construction, commissioning and handover, providing technical leadership on both major programmes and smaller, fast-paced schemes. Key Responsibilities Act as the designated Signalling Contractor Engineering Manager (CEM) across multiple Network Rail projects. Manage engineering governance, technical approvals and project assurance activities. Build and maintain strong relationships with the Network Rail Capital Delivery team and key stakeholders. About You To be considered, you will have: Significant experience as a Signalling Contractor Engineering Manager (CEM) . A strong background working for a rail contractor delivering Network Rail signalling projects. Excellent knowledge of Network Rail engineering assurance and signalling standards, including NR/L2/SIG/30009 . Experience managing multidisciplinary engineering teams and subcontractors. Strong stakeholder management skills with the confidence to engage directly with demanding clients. The ability to balance strategic oversight with a hands-on approach to technical delivery. Desirable Experience Previous experience working on the Network Rail Eastern Capital Delivery framework. DPE accreditation or currently working towards it. Experience with electromechanical interlockings , PLC-based level crossings , signalling renewals and life extension schemes. What's on Offer? £500 - £600 per day Outside IR35 Long-term contract with excellent pipeline of secured work Flexible hybrid/remote working Opportunity to work across major Network Rail Capital Delivery and Works Delivery programmes Join a growing rail engineering team with varied and technically challenging projects

Heavy Plant Fitter Location: North West of England Hours: 40 hours per week (Monday-Friday) Salary: Excellent pay + overtime + benefits Are you an experienced Plant Fitter looking to develop your career with a leading name in the heavy plant and construction machinery industry? This is a fantastic opportunity to join a well-established organisation working with premium earthmoving equipment renowned for quality, performance, and reliability. The Role You'll be responsible for the maintenance, repair, and overhaul of a wide range of heavy earthmoving machinery from excavators and dozers to wheel loaders and dump trucks. You'll diagnose and fix mechanical, hydraulic, and electrical issues, carry out component rebuilds, and ensure all work is completed to the highest standards. This is a workshop-based position offering excellent facilities, modern tooling, and a clean, well-organised environment. Key Responsibilities Service, repair, and maintain heavy plant and earthmoving machinery Diagnose faults and carry out repairs on engines, transmissions, hydraulics, and electrical systems Perform full strip-downs and rebuilds where required Ensure all work is completed safely, efficiently, and to a high standard Maintain accurate service and inspection records What We're Looking For Proven experience working with heavy plant, construction, or earthmoving equipment NVQ Level 3 (or equivalent) in Plant Maintenance, Mechanical Engineering, or similar Strong understanding of hydraulics, engines, and electrical systems A proactive approach, attention to detail, and a commitment to quality and safety What's on Offer Excellent pay reflective of experience 40-hour working week Generous overtime scheme: First 4 hours paid at 1.5x Any additional hours paid at double time 31 days annual leave Company pension scheme Health cash plan and other great employee benefits Ongoing manufacturer-backed training and career development Plenty of progression opportunities within a supportive, growing organisation If you're a skilled Plant Fitter with a passion for heavy machinery and want to join a company that truly values its people, offers great rewards, and invests in your future - this could be the perfect next step for you. Apply now to find out more and take your career forward maintaining world-class equipment. SER-IN

Heavy Plant Fitter Inverness (Mobile role) £50,000 basic plus overtime rate 1.5x Company van, Private healthcare, 33 days holiday including banks and more Overview We are seeking a skilled and dedicated Mobile Heavy Plant Fitter to join our team, covering the North of Scotland and the surrounding isles. This is an excellent opportunity for an experienced professional to work on a variety of heavy plant machinery, including Volvo, Liebherr, and CAT equipment. If you are passionate about delivering high-quality maintenance and repair services, we encourage you to apply for this rewarding role. Responsibilities Perform maintenance, diagnostics, and repairs on a range of heavy plant machinery, including Volvo, Liebherr, and CAT equipment. Travel across the North of Scotland and the isles to provide on-site support to clients. Ensure all work is completed to the highest standards, adhering to health and safety regulations. Maintain accurate records of work completed, parts used, and time spent on each job. Provide excellent customer service, building and maintaining strong relationships with clients. Collaborate with the wider team to ensure efficient scheduling and completion of tasks. Qualifications Proven experience as a heavy plant fitter or similar role, with expertise in working on Volvo, Liebherr, and CAT machinery. Strong diagnostic and problem-solving skills. Relevant qualifications in mechanical engineering or a related field (e.g., NVQ Level 3 or equivalent). Full UK driving license. Ability to work independently and manage time effectively. Willingness to travel extensively and stay overnight when required. Day-to-Day Travel to client sites across the North of Scotland and the isles to carry out maintenance and repairs. Diagnose and resolve mechanical and electrical issues on heavy plant machinery. Communicate effectively with clients to understand their needs and provide updates on progress. Ensure the company van is stocked with necessary tools and parts for each job. Complete all required paperwork and documentation promptly and accurately. Benefits Competitive hourly rate of £20ph - £23ph, with overtime paid at 1.5x. 42.5 hour week Company-provided van for work purposes. Private healthcare coverage. Generous holiday entitlement of 33 days per year. 4x death in service Opportunities for professional development and training. A supportive and collaborative work environment. If you are a motivated and experienced Mobile Heavy Plant Fitter looking for a new challenge, we would love to hear from you. Join our team and play a vital role in maintaining and repairing industry-leading machinery while enjoying a competitive salary and excellent benefits. Apply today to take the next step in your career! SER-IN

Own a desk. Share the profits. Build a team. This is M&E recruitment done differently. Principal Consultant - M&E Surveying Leeds Employee Owned Trust £40k-£50k + Uncapped Commission Principal Consultant - M&E Surveying Recruitment Leeds Employee Owned I'm exclusively partnering with a specialist technical recruitment firm based in Leeds to find a Principal Consultant for their Mechanical & Electrical Surveying division. My client is a genuinely impressive business - 20 strong, growing at 20% year-on-year, and structured as an Employee Owned Trust. They operate across five specialist business lines and have built a reputation for deep technical expertise and long-term client relationships. This is not a revolving-door recruiter - this is a business where people stay, grow, and share in the success they create. Package: Salary: £40,000 - £50,000 (Dependant on experience) Uncapped commission EOT - Employee Owned Trust - Tax free bonus at the end of the year Free Parking on site Strong annual leave with the chance to buy more The Role This is a hybrid of strategic business development and consultative recruitment. You'll own the M&E Surveying desk, working directly with the Managing Director and with real scope to build a team around you if that's the direction you want to go. You'll be targeting facility managers, heads of department and senior operational leaders across construction and housing, and managing a focused portfolio of strategic key accounts alongside self-generated new business. Day-to-day responsibilities include: Building and converting a self-generated new business pipeline across M&E surveying, construction and housing Managing a focused portfolio of strategic key accounts (fewer than 10), driving depth of relationship and share-of-wallet Running consultative discovery conversations that translate client pain points into tailored recruitment solutions Nurturing a strong supply-side network of engineers, chartered surveyors and technical professionals What My Client Is Looking For 5+ years in technical recruitment, ideally across construction, housing, engineering or surveying Proven business development track record - self-generated prospecting, cold outreach, and closing deals within 1-3 month sales cycles Direct experience recruiting within M&E, structural or surveying disciplines (or a technical sales background in construction) Consultative selling skills - someone who leads with questions, not pitches, and is comfortable in commercial conversations at senior level Desirable But Not Essential A background as a practitioner or technical salesperson in construction or engineering Experience placing into tier-1 contractors, housebuilders or major FM firms Experience mentoring junior consultants, or genuine ambition to grow a team This vacancy is being advertised by Aaron Wallis Recruitment and Training Limited operating as an Employment Agency, registered in England No View our and

Projects and Compliance Estates Manager An excellent opportunity for an organised Projects and Compliance Estates Manager with strong premises compliance, health and safety, project management, contractor management and building services experience. If you've also worked in the following roles, we'd also like to hear from you: Facilities Projects Manager, Premises Manager, Building Compliance Manager, Estates Project Manager, Hard FM Manager, Facilities Manager, Estates Compliance Manager, Building Services Manager This role is officially known within the organisation as an Estates Project & Compliance Manager SALARY: £45,580 to £52,992 per annum + Benefits LOCATION: Supporting multiple sites across Coventry, Warwickshire and Leicestershire JOB TYPE: Full-Time, Permanent WORKING HOURS: Monday to Thursday: 8.00am - 4.00pm, Friday: 8.00am - 3.30pm, 37 Hours per Week JOB OVERVIEW We have a fantastic new job opportunity for a Projects and Compliance Estates Manager to provide strategic and technical management of premises projects, site compliance and estate improvement works. As a Projects and Compliance Estates Manager you will support safe, sustainable and high-quality learning environments, leading on compliance, health and safety, environmental initiatives, energy management, audits and contractor coordination. The Projects and Compliance Estates Manager will work closely with premises teams, operations managers, consultants and senior leaders to ensure buildings, systems and projects are managed effectively, safely and in line with regulatory requirements. DUTIES Your duties as the Projects and Compliance Estates Manager include: Project Support: Support larger estate project works and assist with the implementation of new organisational strategies Site Compliance: Take responsibility for site and building compliance across the estate, including monitoring, reporting and record keeping Asbestos and Legionella Management: Maintain local asbestos management plans, coordinate surveys and support premises teams with legionella risk assessments and works Budget Support: Assist with annual estates budgets and local project budgets, including order requests, appraisal, approval and delivery sign-off Energy and Utilities: Support utility management, renewable energy contracts, meter readings and liaison with relevant external bodies Health and Safety Advice: Provide estates technical advice, audits, surveys, risk assessment support and documentation guidance Contractor Management: Coordinate estate contracts, contractor health and safety arrangements and safe working practices Design and Specification: Prepare designs, plans and minor project specifications in line with planning, building regulations and CDM regulations Asset Management: Maintain estate and compliance management systems, schedule inspections and provide monthly compliance reports Stakeholder Support: Prepare reports, attend meetings and advise leaders on premises legislation, building condition and estate improvements CANDIDATE REQUIREMENTS ESSENTIAL Minimum HNC / HND qualification in an estates or buildings-related subject Full driving licence and own transport, with willingness and ability to travel across sites Evidence of continuing professional development in estates leadership, sustainability or capital project management Highly organised, able to prioritise, work under pressure, meet deadlines and maintain attention to detail Excellent verbal and written communication skills with the ability to engage a range of audiences Strong interpersonal skills with the ability to build effective working relationships internally and externally Able to assist premises teams with technical and operational support Able to use Microsoft Outlook, Word, Excel and bespoke estates management software packages Able to interpret and present written and numerical data in spreadsheets and reports Able to follow safeguarding procedures and recognise when to report concerns DESIRABLE Degree-level qualification or equivalent experience in an engineering or estates-based vocation IOSH or NEBOSH qualification City and Guilds, NVQ or other recognised qualification in craft skills at Level 3 or equivalent Previous practical experience within surveying or building services Basic knowledge of AutoCAD drawing software Understanding of mechanical and electrical services, building regulations and compliance Knowledge of procurement procedures and contract administration Experience with energy, utilities and environmental initiatives BENEFITS Competitive rates of pay Professional development opportunities Career pathways across the Trust Teacher / Local Authority Pension Scheme Online retail discount Employee Assistance Programme Family Friendly policies to support family & carer commitments Flexible Working Arrangements The successful candidate will be subject to an enhanced DBS check and Social Media check APPLY TODAY By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14826 Full-Time, Permanent Construction and Trades Jobs, Careers and Vacancies. Find a new job and work in Coventry, West Midlands. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ

Mobile Plant Fitter Glasgow £18-£19ph Overtime 1.5x and double time, van with personal use and door to door pay, 30 days holiday, pension scheme, health care and more Overview We are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This hybrid role offers the opportunity to work both in our workshop and out on the road, servicing and repairing a wide range of plant machinery, including excavators, loaders, telehandlers, and more. If you are passionate about machinery, have the required qualifications, and are looking for a rewarding role with excellent benefits, we encourage you to apply. Responsibilities Conduct maintenance, servicing, and repairs on a variety of plant machinery, including excavators, loaders, and telehandlers. Diagnose and resolve mechanical, electrical, and hydraulic issues efficiently. Perform routine inspections to ensure machinery is operating at optimal performance. Provide on-site support to clients, ensuring minimal downtime for their equipment. Maintain accurate records of work completed and parts used. Adhere to health and safety regulations at all times. Collaborate with the workshop team to ensure seamless operations. Qualifications NVQ Level 2 or 3 in Plant Maintenance, HGV Maintenance, or Agricultural Engineering (or equivalent). Proven experience working on plant machinery, HGVs, or agricultural equipment. Strong diagnostic and problem-solving skills. Ability to work independently and manage time effectively. Full UK driving license. Excellent communication and customer service skills. Day-to-Day Split your time between workshop-based tasks and on-the-road service calls. Use diagnostic tools and equipment to identify and fix faults. Interact with clients to provide updates and ensure satisfaction with repairs. Travel to various locations with a fully equipped van to provide on-site support. Work a standard 39-hour week, with opportunities for overtime. Benefits Competitive hourly rate of £18-£19 per hour. Fully equipped van provided, with door-to-door pay and personal use included. Overtime paid at 1.5x and double time for applicable hours. 30 days of holiday (including bank holidays). Comprehensive pension scheme. Health care benefits. Regular appraisal scheme to support your career development. Opportunity to work on a diverse range of machinery in a dynamic environment. If you are a qualified and experienced Mobile Plant Fitter looking for a role that offers variety, excellent benefits, and the chance to work with a supportive team, we would love to hear from you. Apply today to take the next step in your career! SER-IN

Mobile Plant Engineer (Fully Remote) Preston £20.40ph Van with personal use, door to door pay, overtime paid at 1.5x and double time, 39 hour week, 30 days holiday, pension scheme, appraisal scheme and more OverviewWe are seeking a skilled and dedicated Mobile Plant Engineer to join our team in a fully remote capacity. This is an exciting opportunity to work on a diverse range of plant machinery, including excavators, dumpers, rollers, loaders, telehandlers, and more. If you are a qualified professional with a passion for engineering and a commitment to delivering exceptional service, we want to hear from you. Responsibilities Conduct maintenance, servicing, and repairs on a wide variety of plant machinery, ensuring all work is completed to the highest standards. Diagnose and troubleshoot mechanical, electrical, and hydraulic faults on equipment. Perform routine inspections and preventative maintenance to minimize downtime. Maintain accurate records of all work carried out, including service reports and parts used. Provide technical support and advice to customers as required. Ensure compliance with health and safety regulations at all times. Manage your workload effectively while working independently in a remote capacity. Qualifications NVQ Level 2 or 3 in Plant Maintenance or a related field is essential. Proven experience working with plant machinery, including excavators, dumpers, rollers, loaders, and telehandlers. Strong diagnostic and problem-solving skills. Ability to work independently and manage time effectively. Full UK driving license. Excellent communication and customer service skills. Day-to-Day Travel to customer sites to carry out maintenance and repairs on plant machinery. Use diagnostic tools and equipment to identify and resolve issues efficiently. Liaise with customers to provide updates on work progress and offer technical advice. Maintain and manage the company-provided van, ensuring it is stocked with necessary tools and parts. Complete all required documentation and service reports promptly. Benefits Competitive hourly rate of £20.40 per hour. Fully remote role with a company-provided van, including door-to-door pay and personal use. Overtime opportunities paid at 1.5x and double time rates. 39-hour workweek, with overtime paid after standard hours. Generous holiday allowance of 30 days. Comprehensive appraisal scheme to support career development. Pension scheme to secure your future. Opportunity to work with a wide range of plant machinery in a dynamic and rewarding environment. If you are a motivated and experienced Mobile Plant Engineer looking for a role that offers flexibility, competitive pay, and excellent benefits, we encourage you to apply today. Join our team and take the next step in your engineering career! SER-IN

HVAC & Refrigeration Service & Installation Engineer Location: Cambridgeshire / East Anglia Salary: £35,000 - £45,000 (DOE) Please note: UK work sponsorship is NOT available for this position. Applicants must already have the right to live and work in the UK. Visa sponsorship cannot be provided. An established and growing building services contractor is seeking an experienced HVAC & Refrigeration Service & Installation Engineer to join its expanding Mechanical Services team across Cambridgeshire and East Anglia. This is an excellent opportunity to join a business that is investing significantly in the growth of its HVAC division, offering long-term career progression, ongoing manufacturer training and the chance to work across a varied portfolio of residential and commercial projects. The successful candidate will be responsible for carrying out a combination of installations, planned preventative maintenance, fault finding, repairs and breakdown response across a wide range of air conditioning and refrigeration systems. They will work independently, deliver a consistently high standard of workmanship and provide excellent customer service while representing the business professionally. Key Responsibilities Install split, multi-split, VRF/VRV and refrigeration systems. Carry out planned preventative maintenance (PPM). Diagnose, repair and service air conditioning and refrigeration equipment. Commission newly installed systems. Perform leak detection, pressure testing, evacuation and refrigerant charging in line with current F-Gas regulations. Complete electronic job reports and commissioning documentation accurately. Identify additional repair requirements and provide recommendations where appropriate. Deliver excellent customer service and maintain strong client relationships. Participate in an out-of-hours call-out rota once established. Ensure all work is completed safely and in accordance with current industry regulations. Essential Requirements Proven experience installing split and multi-split air conditioning systems. Strong fault-finding and diagnostic skills. Valid F-Gas Category 1 qualification. Full UK Driving Licence. Ability to work independently and manage workloads effectively. Excellent communication and customer service skills. High standards of pipework, brazing and installation practices. Desirable Skills Experience working with Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Bosch or other leading manufacturers. Refrigeration experience. Experience with VRF/VRV systems. NVQ Level 2 or Level 3 in Refrigeration & Air Conditioning. 18th Edition Electrical qualification. IPAF. PASMA. CSCS Card. What's on Offer Competitive salary of £35,000 - £45,000 , depending on experience. Company van. Fuel card. Company mobile phone. Company uniform and PPE. Pension scheme. Overtime opportunities. Manufacturer training and ongoing professional development. Genuine career progression within a rapidly expanding HVAC department. The Ideal Candidate The ideal candidate will enjoy both installation and service work and take pride in delivering high-quality workmanship. They will be reliable, organised and self-motivated, with the ability to work independently while maintaining excellent customer relationships. This is an outstanding opportunity for an experienced engineer looking to join a growing business where their skills will be recognised and where genuine opportunities for career development exist as the department continues to expand. Interested applicants are encouraged to apply with an up-to-date CV for immediate consideration - Any questions please contact Harry Severn: (url removed)