LORRY DRIVER Safe Transportation Drive heavy goods vehicles (HGVs) in compliance with all road haulage regulations, including driving hours and tachograph laws. Loading and Unloading Supervise and assist with the safe and efficient loading and offloading of materials, which may involve using equipment such as forklifts, HIAB cranes, or tail-lifts. Securing Loads Ensure all heavy and sometimes awkwardly shaped metal goods and equipment are correctly and safely secured for transit to prevent damage or accidents. Route Planning Organize the most efficient delivery routes and schedules, adapting to traffic or road closures as needed, and communicating any delays to the transport manager or dispatch. Vehicle Maintenance and Checks Perform daily pre- and post-trip vehicle inspections (e.g., checking oil, tyres, brakes, and general mechanical condition) and report any issues promptly to ensure the vehicle is roadworthy. Paperwork and Record Keeping Complete all necessary delivery documentation, including updating vehicle logbooks, recording mileage, fuel details, and obtaining customer signatures or proof of delivery (POD). Customer Service Act as the face of the company during deliveries, maintaining a polite and professional manner when interacting with clients and addressing any immediate concerns or complaints. Safety Compliance Adhere to all company and site-specific health and safety policies and procedures, which may require a Construction Skills Certification Scheme (CSCS) card for access to some construction sites. Required Skills and Qualifications Licenses & Certifications A valid HGV (Heavy Goods Vehicle) license (e.g., Category C or C+E). A valid Driver Certificate of Professional Competence (CPC). A clean driving record. A digital tachograph card. Experience or certification in operating material handling equipment (like a forklift or HIAB crane) is often preferred. Skills Strong attention to detail for securing complex loads and completing paperwork accurately. Excellent time management and organizational skills to meet delivery schedules. Physical stamina and the ability to lift and carry heavy items or work in physically demanding conditions. Good communication skills to liaise effectively with dispatch, warehouse staff, and customers. Ability to work independently with minimal supervision and show initiative
Dec 02, 2025
Full time
LORRY DRIVER Safe Transportation Drive heavy goods vehicles (HGVs) in compliance with all road haulage regulations, including driving hours and tachograph laws. Loading and Unloading Supervise and assist with the safe and efficient loading and offloading of materials, which may involve using equipment such as forklifts, HIAB cranes, or tail-lifts. Securing Loads Ensure all heavy and sometimes awkwardly shaped metal goods and equipment are correctly and safely secured for transit to prevent damage or accidents. Route Planning Organize the most efficient delivery routes and schedules, adapting to traffic or road closures as needed, and communicating any delays to the transport manager or dispatch. Vehicle Maintenance and Checks Perform daily pre- and post-trip vehicle inspections (e.g., checking oil, tyres, brakes, and general mechanical condition) and report any issues promptly to ensure the vehicle is roadworthy. Paperwork and Record Keeping Complete all necessary delivery documentation, including updating vehicle logbooks, recording mileage, fuel details, and obtaining customer signatures or proof of delivery (POD). Customer Service Act as the face of the company during deliveries, maintaining a polite and professional manner when interacting with clients and addressing any immediate concerns or complaints. Safety Compliance Adhere to all company and site-specific health and safety policies and procedures, which may require a Construction Skills Certification Scheme (CSCS) card for access to some construction sites. Required Skills and Qualifications Licenses & Certifications A valid HGV (Heavy Goods Vehicle) license (e.g., Category C or C+E). A valid Driver Certificate of Professional Competence (CPC). A clean driving record. A digital tachograph card. Experience or certification in operating material handling equipment (like a forklift or HIAB crane) is often preferred. Skills Strong attention to detail for securing complex loads and completing paperwork accurately. Excellent time management and organizational skills to meet delivery schedules. Physical stamina and the ability to lift and carry heavy items or work in physically demanding conditions. Good communication skills to liaise effectively with dispatch, warehouse staff, and customers. Ability to work independently with minimal supervision and show initiative
Field Service Engineer (Plant / Construction Equipment / Ex-Forces / HGV) £45,000 - £48,000 (OTE: £50,000 £60,000) + Door to Door Overtime + Vehicle + Fuel Card + Training + Pension Home-based role ideally located: Reading, Bracknell, Swindon, Slough, Guildford, Farnham, Redhill, Epsom, Woking, Cobham. Ex-Forces Candidates encouraged to apply. Are you a Field Service Engineer from one of the following backgrounds: Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar? On offer is an excellent opportunity to work for a growing business, where you will receive ongoing specialist training, door-to-door overtime to maximise your earnings, and the opportunity to become a go to engineer within a growing company. In this role, you will work across the South of England, traveling to customer sites to provide service, maintenance, and repairs on the company's wide product range, which is continually expanding. The company has an excellent reputation within its industry as the go-to leader; it has ambitious plans to grow the team, making this a great time to get on board. The role would suit a Field Service Engineer from the following backgrounds: Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar. The Role Service, maintain and repair the company's wide range of products. Ongoing training and development opportunities including courses & certifications Door-to-door paid overtime Covering a South of England patch - will include occasional staying away The Person Field Service Engineer. Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar background. Time served or relevant engineering qualification would be an advantage. Full UK driving license. Reference Number: BBBH253542 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Kier Rees at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Dec 01, 2025
Full time
Field Service Engineer (Plant / Construction Equipment / Ex-Forces / HGV) £45,000 - £48,000 (OTE: £50,000 £60,000) + Door to Door Overtime + Vehicle + Fuel Card + Training + Pension Home-based role ideally located: Reading, Bracknell, Swindon, Slough, Guildford, Farnham, Redhill, Epsom, Woking, Cobham. Ex-Forces Candidates encouraged to apply. Are you a Field Service Engineer from one of the following backgrounds: Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar? On offer is an excellent opportunity to work for a growing business, where you will receive ongoing specialist training, door-to-door overtime to maximise your earnings, and the opportunity to become a go to engineer within a growing company. In this role, you will work across the South of England, traveling to customer sites to provide service, maintenance, and repairs on the company's wide product range, which is continually expanding. The company has an excellent reputation within its industry as the go-to leader; it has ambitious plans to grow the team, making this a great time to get on board. The role would suit a Field Service Engineer from the following backgrounds: Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar. The Role Service, maintain and repair the company's wide range of products. Ongoing training and development opportunities including courses & certifications Door-to-door paid overtime Covering a South of England patch - will include occasional staying away The Person Field Service Engineer. Heavy Plant, Construction Equipment, Ex-Forces, HGV, Mechanical or similar background. Time served or relevant engineering qualification would be an advantage. Full UK driving license. Reference Number: BBBH253542 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Kier Rees at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Berry Recruitment are currently looking for a HGV Technician for a 3 month contract with possibility of extension to 6 or 12 months. Salary: 18.89 per hour Hours: Monday - Friday, 9-5 Location: Nottingham Job Description: To provide a high quality, comprehensive and efficient maintenance, inspection, repair and test service, ensuring that the client has a fully functional fleet for both the internal fleet and external customers, which includes a diverse range of HGVs, specialist vehicles, light vehicles and road going plant including electric and hybrid. All work must be compliant with statutory legislation, the legal requirements of the Operator's Licence, taxi licensing legislation, DVSA requirements and internal policies and procedures. To work closely with the Workshop Controller to ensure vehicle availability and productivity to meet frontline operational needs of the client's services. To assist the Workshop Controller to help control fleet maintenance costs within the budgetary requirements. To act as a role model to promote a culture of "Right First Time" within the workshop. To champion our apprenticeship scheme to train new mechanics. Principles Duties and Responsibilities: To maintain, service, inspect, repair and test both client and external customers' vehicles, ancillary equipment, plant, and equipment. To maintain, service, inspect and repair electric and other alternative fuelled vehicles. Prepare, present, and accompany HGV vehicles for annual MOT inspections. To carry out periodic safety inspections on all HGV vehicles to DVSA inspection manual standards. To carry out fault diagnosis on complex hydraulic, pneumatic, and electrical systems. To carry out welding, fabrication and body repairs as required. To attend broken down or accident damaged vehicles and effect permanent or running repairs. To ensure that the client's OCRS score maintains its "green" status and that a MOT pass rate to support this, is achieved at all times. To prepare and decommission vehicles - fitting and removing a diverse range of ancillary equipment, accessories, and livery. To ensure that all associated records are updated promptly, accurately, and effectively using the fleet management software system. To ensure that all Health and Safety policies, practices and procedures in respect of the workshop environment are adhered to and ensure that all work areas are kept in a safe and clean condition. To attend training courses linked to PDR reviews and service needs. To support team members within the department when required, ensuring workshop objectives are met Requirements: Experience of working with all aspects of HGV and light commercial vehicle service, maintenance and repair Experience of working on municipal vehicles Experience of electric vehicles, or willingness to learn Experience in welding, or willingness to learn Knowledge of workshop health and safety policies, practices and procedures Knowledge of pneumatics, hydraulics and 12/24v electric systems Ability to work on own initiative and meet strict deadlines Ability to ensure that all associated records are updated promptly, accurately and effectively using the fleet management software system A good standard of written and oral communication skills City & Guilds Level 3 qualification in Heavy Motor Vehicle Engineering, or equivalent Qualified to DVSA standards for HGV inspections and tests Electric and Hybrid vehicle qualification IMI Level 3 or equivalent, or willingness to train Full driving licence with Category C entitlement If this role is of interest, apply now! All applications are reviewed daily. Alternatively, please call Daisy on (phone number removed) to discuss. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.
Nov 28, 2025
Contract
Berry Recruitment are currently looking for a HGV Technician for a 3 month contract with possibility of extension to 6 or 12 months. Salary: 18.89 per hour Hours: Monday - Friday, 9-5 Location: Nottingham Job Description: To provide a high quality, comprehensive and efficient maintenance, inspection, repair and test service, ensuring that the client has a fully functional fleet for both the internal fleet and external customers, which includes a diverse range of HGVs, specialist vehicles, light vehicles and road going plant including electric and hybrid. All work must be compliant with statutory legislation, the legal requirements of the Operator's Licence, taxi licensing legislation, DVSA requirements and internal policies and procedures. To work closely with the Workshop Controller to ensure vehicle availability and productivity to meet frontline operational needs of the client's services. To assist the Workshop Controller to help control fleet maintenance costs within the budgetary requirements. To act as a role model to promote a culture of "Right First Time" within the workshop. To champion our apprenticeship scheme to train new mechanics. Principles Duties and Responsibilities: To maintain, service, inspect, repair and test both client and external customers' vehicles, ancillary equipment, plant, and equipment. To maintain, service, inspect and repair electric and other alternative fuelled vehicles. Prepare, present, and accompany HGV vehicles for annual MOT inspections. To carry out periodic safety inspections on all HGV vehicles to DVSA inspection manual standards. To carry out fault diagnosis on complex hydraulic, pneumatic, and electrical systems. To carry out welding, fabrication and body repairs as required. To attend broken down or accident damaged vehicles and effect permanent or running repairs. To ensure that the client's OCRS score maintains its "green" status and that a MOT pass rate to support this, is achieved at all times. To prepare and decommission vehicles - fitting and removing a diverse range of ancillary equipment, accessories, and livery. To ensure that all associated records are updated promptly, accurately, and effectively using the fleet management software system. To ensure that all Health and Safety policies, practices and procedures in respect of the workshop environment are adhered to and ensure that all work areas are kept in a safe and clean condition. To attend training courses linked to PDR reviews and service needs. To support team members within the department when required, ensuring workshop objectives are met Requirements: Experience of working with all aspects of HGV and light commercial vehicle service, maintenance and repair Experience of working on municipal vehicles Experience of electric vehicles, or willingness to learn Experience in welding, or willingness to learn Knowledge of workshop health and safety policies, practices and procedures Knowledge of pneumatics, hydraulics and 12/24v electric systems Ability to work on own initiative and meet strict deadlines Ability to ensure that all associated records are updated promptly, accurately and effectively using the fleet management software system A good standard of written and oral communication skills City & Guilds Level 3 qualification in Heavy Motor Vehicle Engineering, or equivalent Qualified to DVSA standards for HGV inspections and tests Electric and Hybrid vehicle qualification IMI Level 3 or equivalent, or willingness to train Full driving licence with Category C entitlement If this role is of interest, apply now! All applications are reviewed daily. Alternatively, please call Daisy on (phone number removed) to discuss. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.
Salary up to £45k pa Excellent working environment Learning opportunity Varied and interesting role Our client has been at the forefront of car and commercial vehicle repairs for over 30 years. Their experience has enabled them to sustain growth in the market by offering a Total Service Package all under one roof. On their behalf we are recruiting for an HGV / LCV Foreman & Technician to join their busy team. Reporting to the Workshop Manager the purpose of the role is to perform Vehicle Maintenance, Mechanical Repairs and Vehicle MET repairs and key responsibilities include; Ability to communicate with colleagues and customers alike and share information regarding work in progress and work scheduled in Ability to address or solve issues as they arise and seek guidance if required Self motivated to achieve the tasks in within the given time scales & improve service levels Responsible for keeping a daily log of job descriptions for work carried out Accountable for cleanliness within the work place ensuring a clean tidy work area at all times Awareness of Customer service ethics and expectations of meeting the customers needs Inspecting vehicles and carrying out MOT preparation to VOSA standards Maintenance of various Commercial vehicles and repairs to mechanicial defects MET/Accident damage repairs to Vans and Commercial vehicles Working alongside colleagues to deliver on specific work projects Development of Accident repair in relation to cab detrim & retrim Chassis Laser Checks and Chassis repairs & Steering Geo Checks Knowledge & skills required: Level 3 in Vehicle Maintenance or equivalent Key skills in English and Maths If possible Knowledge & experience in Auto Electrical & diagnostic repairs The hours for the role are 7.00 to 4.30pm Monday to Friday with occasional overtime available. In return for the above you will be offered a highly competitive package working for a well respected independent family owned business For more information and to apply, in confidence, please send your CV to Chris at The Recruitment Fix
Nov 28, 2025
Full time
Salary up to £45k pa Excellent working environment Learning opportunity Varied and interesting role Our client has been at the forefront of car and commercial vehicle repairs for over 30 years. Their experience has enabled them to sustain growth in the market by offering a Total Service Package all under one roof. On their behalf we are recruiting for an HGV / LCV Foreman & Technician to join their busy team. Reporting to the Workshop Manager the purpose of the role is to perform Vehicle Maintenance, Mechanical Repairs and Vehicle MET repairs and key responsibilities include; Ability to communicate with colleagues and customers alike and share information regarding work in progress and work scheduled in Ability to address or solve issues as they arise and seek guidance if required Self motivated to achieve the tasks in within the given time scales & improve service levels Responsible for keeping a daily log of job descriptions for work carried out Accountable for cleanliness within the work place ensuring a clean tidy work area at all times Awareness of Customer service ethics and expectations of meeting the customers needs Inspecting vehicles and carrying out MOT preparation to VOSA standards Maintenance of various Commercial vehicles and repairs to mechanicial defects MET/Accident damage repairs to Vans and Commercial vehicles Working alongside colleagues to deliver on specific work projects Development of Accident repair in relation to cab detrim & retrim Chassis Laser Checks and Chassis repairs & Steering Geo Checks Knowledge & skills required: Level 3 in Vehicle Maintenance or equivalent Key skills in English and Maths If possible Knowledge & experience in Auto Electrical & diagnostic repairs The hours for the role are 7.00 to 4.30pm Monday to Friday with occasional overtime available. In return for the above you will be offered a highly competitive package working for a well respected independent family owned business For more information and to apply, in confidence, please send your CV to Chris at The Recruitment Fix
Head Plant Fitter Bromsgrove £55,000 basic Overview We are seeking a highly skilled and experienced Head Fitter to join our team, this is an exciting opportunity for a motivated individual to take on a leadership role, overseeing the efficient operation of our workshop and yard. The successful candidate will play a key role in ensuring the availability and maintenance of plant machinery across multiple sites while upholding the highest standards of safety and efficiency. Responsibilities As the Head Fitter, your key responsibilities will include: Collaborating with the Plant Manager to schedule, coordinate, and supervise the daily workload of fitters and yard personnel. Providing day-to-day support and guidance to fitters. Managing stock levels for parts and liaising with suppliers as required. Overseeing workshop repairs on all plant machinery, including road-going vehicles (trucks and vans), dumpers, and excavators, ensuring timely and safe delivery. Coordinating the delivery and collection of machinery and plant. Maintaining accurate records of all servicing and repairs. Implementing a system to inspect off-hired machinery and identify damages chargeable to customers/users. Ensuring adherence to health and safety regulations and maintaining a high level of safe working practices. Completing lifting inspections and signing off on certifications. Mentoring and supporting trainees and apprentices. Qualifications The ideal candidate will possess the following qualifications and certifications: LOLER Certification. Testing and Inspection Certification. Level 3 Plant Mechanic Qualification. Forklift Qualification. HGV Certification. Counterbalance Forklift Certification. GCSE English Grade 4/C, Level 2 Functional Skills, or equivalent. GCSE Mathematics Grade 4/C, Level 2 Functional Skills, or equivalent. Day-to-Day Your day-to-day responsibilities will include: Supervising and allocating tasks to workshop and yard personnel. Ensuring all plant machinery and vehicles are maintained and repaired efficiently. Managing inventory and liaising with suppliers to ensure the availability of necessary parts. Conducting inspections and ensuring compliance with health and safety standards. Supporting and mentoring team members to enhance their skills and performance. Coordinating logistics for machinery delivery and collection. Benefits We value our employees and offer a competitive package, including: A basic salary of up to £55,000 per annum. Working hours: Monday to Friday, 07:30 AM to 4:30 PM. 28 days of holiday and additional benefits. If you are a dedicated and experienced professional with the qualifications and expertise required for this role, we would love to hear from you. Join our team and take the next step in your career as a Head Fitter in a dynamic and supportive environment. Apply today! SER-IN
Nov 14, 2025
Full time
Head Plant Fitter Bromsgrove £55,000 basic Overview We are seeking a highly skilled and experienced Head Fitter to join our team, this is an exciting opportunity for a motivated individual to take on a leadership role, overseeing the efficient operation of our workshop and yard. The successful candidate will play a key role in ensuring the availability and maintenance of plant machinery across multiple sites while upholding the highest standards of safety and efficiency. Responsibilities As the Head Fitter, your key responsibilities will include: Collaborating with the Plant Manager to schedule, coordinate, and supervise the daily workload of fitters and yard personnel. Providing day-to-day support and guidance to fitters. Managing stock levels for parts and liaising with suppliers as required. Overseeing workshop repairs on all plant machinery, including road-going vehicles (trucks and vans), dumpers, and excavators, ensuring timely and safe delivery. Coordinating the delivery and collection of machinery and plant. Maintaining accurate records of all servicing and repairs. Implementing a system to inspect off-hired machinery and identify damages chargeable to customers/users. Ensuring adherence to health and safety regulations and maintaining a high level of safe working practices. Completing lifting inspections and signing off on certifications. Mentoring and supporting trainees and apprentices. Qualifications The ideal candidate will possess the following qualifications and certifications: LOLER Certification. Testing and Inspection Certification. Level 3 Plant Mechanic Qualification. Forklift Qualification. HGV Certification. Counterbalance Forklift Certification. GCSE English Grade 4/C, Level 2 Functional Skills, or equivalent. GCSE Mathematics Grade 4/C, Level 2 Functional Skills, or equivalent. Day-to-Day Your day-to-day responsibilities will include: Supervising and allocating tasks to workshop and yard personnel. Ensuring all plant machinery and vehicles are maintained and repaired efficiently. Managing inventory and liaising with suppliers to ensure the availability of necessary parts. Conducting inspections and ensuring compliance with health and safety standards. Supporting and mentoring team members to enhance their skills and performance. Coordinating logistics for machinery delivery and collection. Benefits We value our employees and offer a competitive package, including: A basic salary of up to £55,000 per annum. Working hours: Monday to Friday, 07:30 AM to 4:30 PM. 28 days of holiday and additional benefits. If you are a dedicated and experienced professional with the qualifications and expertise required for this role, we would love to hear from you. Join our team and take the next step in your career as a Head Fitter in a dynamic and supportive environment. Apply today! SER-IN
Our team is the best in the industry - is it time for you to join us? The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The role of the HGV Driver involves loading, delivering and collecting equipment to and from customer sites in a timely and professional manner whilst driving responsibly and safely within the law at all times. When on customer sites, there may be a requirement to carry out hire equipment demonstration and the HGV Driver must ensure that all relevant checks and administration involved for the hire are completed accurately. Applicants applying for the role of HGV Driver should have/be: Significant experience working within an HGV driving role loading, delivering and collecting equipment from customer sites is essential Class 2 driving licence, Driver CPC with a minimum of 35 hours completed and valid Digital Tachograph card An understanding of Health & Safety protocols and the ability to follow these guidelines in the workplace Excellent customer service skills and strong attention to detail From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Nov 14, 2025
Full time
Our team is the best in the industry - is it time for you to join us? The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The role of the HGV Driver involves loading, delivering and collecting equipment to and from customer sites in a timely and professional manner whilst driving responsibly and safely within the law at all times. When on customer sites, there may be a requirement to carry out hire equipment demonstration and the HGV Driver must ensure that all relevant checks and administration involved for the hire are completed accurately. Applicants applying for the role of HGV Driver should have/be: Significant experience working within an HGV driving role loading, delivering and collecting equipment from customer sites is essential Class 2 driving licence, Driver CPC with a minimum of 35 hours completed and valid Digital Tachograph card An understanding of Health & Safety protocols and the ability to follow these guidelines in the workplace Excellent customer service skills and strong attention to detail From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Our team is the best in the industry - is it time for you to join us? The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The role of the HGV Driver involves loading, delivering and collecting equipment to and from customer sites in a timely and professional manner whilst driving responsibly and safely within the law at all times. When on customer sites, there may be a requirement to carry out hire equipment demonstration and the HGV Driver must ensure that all relevant checks and administration involved for the hire are completed accurately. Applicants applying for the role of HGV Driver should have/be: Significant experience working within an HGV driving role loading, delivering and collecting equipment from customer sites is essential Class 2 driving licence, Driver CPC with a minimum of 35 hours completed and valid Digital Tachograph card An understanding of Health & Safety protocols and the ability to follow these guidelines in the workplace Excellent customer service skills and strong attention to detail From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Nov 14, 2025
Full time
Our team is the best in the industry - is it time for you to join us? The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The role of the HGV Driver involves loading, delivering and collecting equipment to and from customer sites in a timely and professional manner whilst driving responsibly and safely within the law at all times. When on customer sites, there may be a requirement to carry out hire equipment demonstration and the HGV Driver must ensure that all relevant checks and administration involved for the hire are completed accurately. Applicants applying for the role of HGV Driver should have/be: Significant experience working within an HGV driving role loading, delivering and collecting equipment from customer sites is essential Class 2 driving licence, Driver CPC with a minimum of 35 hours completed and valid Digital Tachograph card An understanding of Health & Safety protocols and the ability to follow these guidelines in the workplace Excellent customer service skills and strong attention to detail From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Our team is the best in the industry - is it time for you to join us? If you're passionate about delivering great service and want to work for a company where we'll help you be your best, GAP wants to hear from you! The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The duties of the HGV Driver with HIAB will include loading, delivery and collection of hire equipment to and from the customer site in a timely and professional manner, demonstration (if required) and completing any relevant checks and administration involved for the hire. The ideal candidate will have a proven track record of driving experience in a similar environment, driving responsibly and safely within the law at all times. Applicants applying for the role of HGV Driver with HIAB should have/be: HGV Licence HIAB Training preferred Driver CPC - 35hours must have been completed Previous experience in a similar industry From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Sep 01, 2025
Full time
Our team is the best in the industry - is it time for you to join us? If you're passionate about delivering great service and want to work for a company where we'll help you be your best, GAP wants to hear from you! The Role: Our nationwide Non Mechanical division hire a range of equipment including crowd control barriers, scaffolding and road plates to the events industry alongside our more traditional business sectors within the construction, utilities, and infrastructure sectors. The duties of the HGV Driver with HIAB will include loading, delivery and collection of hire equipment to and from the customer site in a timely and professional manner, demonstration (if required) and completing any relevant checks and administration involved for the hire. The ideal candidate will have a proven track record of driving experience in a similar environment, driving responsibly and safely within the law at all times. Applicants applying for the role of HGV Driver with HIAB should have/be: HGV Licence HIAB Training preferred Driver CPC - 35hours must have been completed Previous experience in a similar industry From one division, GAP Hire Solutions now has 10 divisions offering the hire of equipment throughout the UK. We're looking to recruit the best talent the industry has to offer to help us grow even further. As a GAP employee, you'll enjoy loads of benefits such as a staff social fund and loyalty holidays. Our in-house Learning & Development Team are dedicated to giving you the skills you need to be your best and as a company we are always keen to promote internally. Benefits include: Competitive salary and bonus scheme Up to 25 days annual leave plus bank holidays The option to buy up to 5 days additional leave Contributory Pension Scheme Life Assurance Employee Welfare Fund (Company-funded social events) Cycle to Work Scheme Health & Wellness (Well-being Hub, Employee Assistance Helpline, Annual Flu Jab) So what next? If you fit the profile and are up for the challenge, we would love to hear from you! To apply all you need to do is upload your CV and complete our short application form and we'll take it from there. GAP GROUP IS AN EQUAL OPPORTUNITIES EMPLOYER
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around East Sussex.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around East Sussex.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Essex (Chelmsford and surrounding areas)
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Essex (Chelmsford and surrounding areas)
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around London boroughs.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around London boroughs.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Kent areas.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Kent areas.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Workshop Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Delivery Manager the main objective of the role will be to carry out the service and repairs of machinery effectively and efficiently within the workshop to the highest standards, to ensure the delivery of a first-class service to both internal & external customers.
Key responsibilities will include:
* Service and repair construction equipment or miscellaneous equipment as required by line management, continuously maintaining safe working practices throughout.
* Complete all work in line with quotations and time guides, highlighting to management
where additional work may be required, upon strip-down of components.
* Complete tablet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts require as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Accurately complete paperwork, i.e., oil sample reports and service inspection reports.
* Maintain a sufficient personal toolkit to enable effective job maintenance.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Ensure software updates are installed as new versions are released.
* Assist and coach colleagues with technical support where necessary.
* Ensure a smart and professional appearance, and to ensure housekeeping is of a high standard.
* Assist with on-site repairs in the case of labour shortage or where a second person is required.
* Understand technical literature including service bulletins and parts books
* Attend any relevant product or systems training courses, to ensure a high standard of competence required to efficiently complete workshop duties.
* Work in accordance with the company’s UK standards of health, safety, quality and environmental care.
* Work in accordance with the companies Commercial Vehicle Policy.
* Have the ability to communicate efficiently with colleagues, management and customers
* Any other duties that may be reasonably requested by your manager.
* Provide the flexibility to work overtime as and when required.
To be considered, candidates must hold the following qualification and possess the following experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electronics.
* Welding, fabrication and line boring experience would be advantageous
In return you will receive a competitive salary and excellent benefits to include Pension, Health Insurance, training, company uniform and company bonus
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Workshop Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Delivery Manager the main objective of the role will be to carry out the service and repairs of machinery effectively and efficiently within the workshop to the highest standards, to ensure the delivery of a first-class service to both internal & external customers.
Key responsibilities will include:
* Service and repair construction equipment or miscellaneous equipment as required by line management, continuously maintaining safe working practices throughout.
* Complete all work in line with quotations and time guides, highlighting to management
where additional work may be required, upon strip-down of components.
* Complete tablet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts require as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Accurately complete paperwork, i.e., oil sample reports and service inspection reports.
* Maintain a sufficient personal toolkit to enable effective job maintenance.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Ensure software updates are installed as new versions are released.
* Assist and coach colleagues with technical support where necessary.
* Ensure a smart and professional appearance, and to ensure housekeeping is of a high standard.
* Assist with on-site repairs in the case of labour shortage or where a second person is required.
* Understand technical literature including service bulletins and parts books
* Attend any relevant product or systems training courses, to ensure a high standard of competence required to efficiently complete workshop duties.
* Work in accordance with the company’s UK standards of health, safety, quality and environmental care.
* Work in accordance with the companies Commercial Vehicle Policy.
* Have the ability to communicate efficiently with colleagues, management and customers
* Any other duties that may be reasonably requested by your manager.
* Provide the flexibility to work overtime as and when required.
To be considered, candidates must hold the following qualification and possess the following experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electronics.
* Welding, fabrication and line boring experience would be advantageous
In return you will receive a competitive salary and excellent benefits to include Pension, Health Insurance, training, company uniform and company bonus
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Vehicle Mechanic / Technician
Location: Brackley
£35,000 Per Annum
Rota: Monday – Friday - DAYS
My client, a large Fleet Company, is looking for a qualified and experienced Vehicle Mechanic to join their fitter team and train / learn service, maintenance and repair of HGV's and Commercial vehicles.
The main responsibilities of the Vehicle Mechanic will include;
Routine maintenance of HGV's, Commercial Vehicles and Light Vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
Fault Finding
Inspections
The client is prepared to offer the Vehicle Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful Vehicle Mechanic will have;
A professionally recognised qualification
A full UK Driving licence
If you are interested in this Vehicle Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed). INDS3
Mar 23, 2022
Permanent
Vehicle Mechanic / Technician
Location: Brackley
£35,000 Per Annum
Rota: Monday – Friday - DAYS
My client, a large Fleet Company, is looking for a qualified and experienced Vehicle Mechanic to join their fitter team and train / learn service, maintenance and repair of HGV's and Commercial vehicles.
The main responsibilities of the Vehicle Mechanic will include;
Routine maintenance of HGV's, Commercial Vehicles and Light Vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
Fault Finding
Inspections
The client is prepared to offer the Vehicle Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful Vehicle Mechanic will have;
A professionally recognised qualification
A full UK Driving licence
If you are interested in this Vehicle Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed). INDS3
HGV Technician
Location: Heathrow
Salary: £40,000 - £50,000
Rota: Monday – Friday
My client, a large commercial vehicle / plant company, is looking for a qualified and experienced HGV Technician / HGV Mechanic to join their workshop fitter team.
The HGV Technician / HGV Mechanic will be working on a range of commercial vehicles and machinery.
The main responsibilities of the HGV Technician / HGV Mechanic will include;
Routine maintenance of HGV's, Road sweepers, municipal vehciles and plant
Repairs as necessary to ensure equipment is fit for purpose
Fault Finding / Diagnostics
The client is prepared to offer the HGV Technician / HGV Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful HGV Technician / HGV Mechanic will have;
A professionally recognised qualification in Heavy Vehicle / Plant Maintenance and repair (NVQ Level 2 or 3 or equivalent)
Experience with Municipal / Plant / Commercial vehicles within the last 2 years
A full UK Driving licence - Class 2 Desirable
If you are interested in this HGV Technician / HGV Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed)
Mar 23, 2022
Permanent
HGV Technician
Location: Heathrow
Salary: £40,000 - £50,000
Rota: Monday – Friday
My client, a large commercial vehicle / plant company, is looking for a qualified and experienced HGV Technician / HGV Mechanic to join their workshop fitter team.
The HGV Technician / HGV Mechanic will be working on a range of commercial vehicles and machinery.
The main responsibilities of the HGV Technician / HGV Mechanic will include;
Routine maintenance of HGV's, Road sweepers, municipal vehciles and plant
Repairs as necessary to ensure equipment is fit for purpose
Fault Finding / Diagnostics
The client is prepared to offer the HGV Technician / HGV Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful HGV Technician / HGV Mechanic will have;
A professionally recognised qualification in Heavy Vehicle / Plant Maintenance and repair (NVQ Level 2 or 3 or equivalent)
Experience with Municipal / Plant / Commercial vehicles within the last 2 years
A full UK Driving licence - Class 2 Desirable
If you are interested in this HGV Technician / HGV Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed)
HGV Technician / HGV Mechanic
Location: Heathrow
£40,000 - £50,000 Per Annum
£40,000 Basic + Overtime
Overtime: Paid At An Increased Rate
Rota: Monday – Friday DAYS SHIFT
My client, a large commercial vehicle company, is looking for a qualified and experienced HGV technician / HGV Mechanic / HGV Fitter to join their workshop fitter team. The HGV technician / HGV Mechanic /HGV Fitter will be based out of the depot in the Heathrow area.
The HGV Technician / HGV Mechanic / HGV Fitter will be working on a range of Heavy Vehicles, Plant, Groundcare Machinery and Light Vehicles.
The main responsibilities of the HGV Technician / HGV Mechanic / HGV Fitter will include;
Routine maintenance, servicing and repair of HGV's, Plant, Ground Care Equipment and Commercial vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
The client is prepared to offer the HGV Technician / HGV Mechanic / HGV Fitter;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful HGV Technician / HGV Mechanic / HGV Fitter will have;
A professionally recognised qualification in Heavy Vehicle / Plant Maintenance and repair (NVQ Level 2 or 3 or equivalent)
Experience with Municipal / Plant / Commerical vehicles within the last 2 years
A full UK Driving licence
If you are interested in this HGV Technician / HGV Mechanic / HGV Fitter role, please submit an up to date CV through this advert or call Jay at Kemp Recruitment on (phone number removed)
Mar 23, 2022
Permanent
HGV Technician / HGV Mechanic
Location: Heathrow
£40,000 - £50,000 Per Annum
£40,000 Basic + Overtime
Overtime: Paid At An Increased Rate
Rota: Monday – Friday DAYS SHIFT
My client, a large commercial vehicle company, is looking for a qualified and experienced HGV technician / HGV Mechanic / HGV Fitter to join their workshop fitter team. The HGV technician / HGV Mechanic /HGV Fitter will be based out of the depot in the Heathrow area.
The HGV Technician / HGV Mechanic / HGV Fitter will be working on a range of Heavy Vehicles, Plant, Groundcare Machinery and Light Vehicles.
The main responsibilities of the HGV Technician / HGV Mechanic / HGV Fitter will include;
Routine maintenance, servicing and repair of HGV's, Plant, Ground Care Equipment and Commercial vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
The client is prepared to offer the HGV Technician / HGV Mechanic / HGV Fitter;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful HGV Technician / HGV Mechanic / HGV Fitter will have;
A professionally recognised qualification in Heavy Vehicle / Plant Maintenance and repair (NVQ Level 2 or 3 or equivalent)
Experience with Municipal / Plant / Commerical vehicles within the last 2 years
A full UK Driving licence
If you are interested in this HGV Technician / HGV Mechanic / HGV Fitter role, please submit an up to date CV through this advert or call Jay at Kemp Recruitment on (phone number removed)
Car Mechanic
Location: Brackley
£35,000 Per Annum
Rota: Monday – Friday - DAYS
My client, a large Fleet Company, is looking for a qualified and experienced Car Mechanic to join their fitter team and train / learn service, maintenance and repair of HGV's and Commerical vehciles.
The main responsibilities of the Car Mechanic will include;
Routine maintenance of HGV's, Commerical Vehicles and Light Vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
Fault Finding
Inspections
The client is prepared to offer the Car Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful Car Mechanic will have;
A professionally recognised qualification
A full UK Driving licence
If you are interested in this Car Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed). INDS3
Mar 23, 2022
Permanent
Car Mechanic
Location: Brackley
£35,000 Per Annum
Rota: Monday – Friday - DAYS
My client, a large Fleet Company, is looking for a qualified and experienced Car Mechanic to join their fitter team and train / learn service, maintenance and repair of HGV's and Commerical vehciles.
The main responsibilities of the Car Mechanic will include;
Routine maintenance of HGV's, Commerical Vehicles and Light Vehicles.
Repairs as necessary to ensure hire equipment is fit for purpose
Fault Finding
Inspections
The client is prepared to offer the Car Mechanic;
A competitive salary with excellent overtime rates
Genuine opportunities for career progression
The successful Car Mechanic will have;
A professionally recognised qualification
A full UK Driving licence
If you are interested in this Car Mechanic role, please submit an up to date CV through this advert or call Jack at Kemp Recruitment on (phone number removed). INDS3
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around East Sussex.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around East Sussex.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Essex (Chelmsford and surrounding areas)
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around the Essex (Chelmsford and surrounding areas)
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around London boroughs.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
Mar 23, 2022
Permanent
Mech Tech Professionals is actively recruiting for a Field Service Engineer for our Construction Machinery servicing and distribution client.
Reporting to the Service Supervisor, the main objective of the role will be to effectively and efficiently carry out diagnostics, service and repair of machinery within the geographical area, ensuring first class service to both internal & external customers.
Be the Engineer responsible for seeking revenue opportunities and discuss these with customers, Customer Support Representative’s and the Line Manager.
This is a home-based role which will require travelling around London boroughs.
Main responsibilities will include:
* To self-manage the service and repair of construction equipment or miscellaneous equipment within the geographical area, maintaining safe working practices throughout.
* Identify mechanical problems, using technical knowledge and computerised diagnostic equipment, offering guidance and advice to the customer.
* Carry out all work in line with quotations and time guides, highlighting to management and customers where additional work may be required.
* Be the main point of contact for the customer, ensuring high levels of satisfaction through effective resolution of queries and regular communication on planned site visits and machine repair progress.
* Ensure software updates are installed as new versions are released.
* Accurate completion of systems / paperwork (including but not limited to oil sample reports, Matris readouts, component failure reports, Engineer Report Generator’s)
* Complete Personal Digital Assistant’s and electronic timesheet inputs in ‘real time’ providing comprehensive details of the work undertaken.
* Order parts for work as necessary and to return parts in a clean condition and at the time of job completion, to aid the efficient invoicing of workshop jobs.
* Carry out duties in a commercially focussed way, seeking additional service revenue opportunities and promoting the company’s aftermarket solutions.
* Maintain a sufficient personal toolkit to enable you to carry out the job effectively.
* Company tooling (including but not limited to)
* Laptops, tablets, specialist tooling and lifting equipment), ensure defects are reported, use is in line with current test periods and in line with instructions/training.
* Assist and coach colleagues with technical support and guidance where necessary
* Provide a smart and professional appearance, wearing appropriate work wear and Personal Protective Equipment (PPE), and to ensure housekeeping in your work area and van is of a high standard.
* Have the flexibility to work overtime as and when necessary and to honour reasonable call out requests.
* Attend any relevant product/systems training courses, staying away from home where required, to ensure a high standard of competence required to efficiently complete duties.
* Work in accordance with the company’s standards of health, safety, quality and environmental care.
* Any other duties that may be reasonably requested by management
To be considered for this position, candidates must hold the following qualifications and experience:
* Hold a formal engineering qualification in Plant Maintenance, Agricultural/HGV mechanics (i.e., NVQ 3/C&G)
* Have relevant experience in the repair and maintenance of heavy construction plant, including proven technical competence on diesel engines, transmissions, drive lines, hydraulics and electrics.
* Have advanced diagnostic and trouble shooting skills and comprehensive understanding of hydraulics, electrics and eATS
* Welding and fabrication experience desirable
In return, you will receive a competitive salary, Mercedes company van, Laptop, mobile and benefits to include pension, Health and dental care.
Mech Tech Professionals is operating as an Employment Agency.
Once you apply to this job, your application will be reviewed by Mech Tech Professionals. If your application is successful, a consultant will be in contact with you within the next 7 days. If you do not hear from us within 7 days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly.
All candidates registering with Mech Tech Professionals will need to provide proof of identity, and evidence of any experience, training and qualifications our client considers necessary for this position
