Are you a Structural Engineer looking for your next challenge?
Do you have experience working in Solidworks and AutoCAD?
Looking for an opportunity to work with an in-house construction team?
Who are we?
Clear Channel UK is one of the UK’s largest Out of Home media and infrastructure companies, operating more than 35,000 advertising sites nationwide and employing 600+ people in 13 locations.
Our mission is To Create the Future of Media, transforming our estate to the benefit of all our stakeholders, through data-driven innovations and infrastructure.
About the role
The engineering team takes responsibility for all aspects of pre-construction including structural design of both our large and small format, outdoor digital advertisement structures and assets.
The team provide an internal technical service to support construction and operation of conventional structures utilising standard steel sections, reinforced concrete, masonry etc as well as small, complex street furniture structures such as bus shelters composed almost entirely of bespoke engineered components.
We are looking to recruit a Structural Engineer within our Construction Department, this position is a fixed term contract for 9-12 months , to cover maternity leave.
What you’ll be doing
Detailed design and analysis of steel, masonry and reinforced concrete structures in accordance with prevailing Eurocodes, British and other relevant Standards and guidelines.
Designing below ground foundations taking account of geotechnical site conditions
Designing non-standard, complex structures and components
Designing structures supported entirely by existing masonry buildings
Developing design solutions which consider construction techniques, operation, maintenance and health and safety
Formulate design solutions, recommend materials, systems and methods, produce detailed design supported by structural analysis and calculations, summarised and presented within concise technical reports.
Producing design documents such as drawings, specifications, instructions etc with sufficient detail and clarity to facilitate construction and brief installation teams.
Resolving site installation issues and technical queries from installation and construction teams
Working primarily in a ‘desk based’ role but occasional site visits to carryout surveys, structural assessments, provide technical support, structural and quality checks during and after installation.
What we’re looking for
Degree Civil / Struct ural Engineering
Experienced user of Creo and/or Solidworks
High competency structural design utilising relevant software (e.g. AutoCAD, CADS, Tekla)
Previous roles within structural design consultants as well as building/engineering contractors, and/or experience of design & build projects
Experience designing masonry structures and/or retrofitted additions/fixings into masonry buildings
Knowledge of relevant legislation and regulations with respect to managing health and safety
Solutions focussed
Excellent communication and interpersonal skills
Ability to manage your own time to meet required deadlines
What’s in it for you?
Salary £38,000 per annum
Remote working with some time in a local office to you
Flexible working hours
25 days paid annual leave plus Bank Holidays
Company Pension Scheme matched to 8%
Healthcare Cash Plan
Life Insurance
Participation in employee discount scheme across hundreds of retailers
Social events
Charity days
Does this sound like to role for you?
If the answer is YES, why not apply today!
At Clear Channel UK we believe in fairness and as an equal opportunities employer we work hard to foster an inclusive environment, a place you can truly be yourself and be treated fairly. We focus purely on skills and behaviours so if you'd like the opportunity to help us create the future of media, out of home, we'd like to hear from you
Oct 04, 2023
Full time
Are you a Structural Engineer looking for your next challenge?
Do you have experience working in Solidworks and AutoCAD?
Looking for an opportunity to work with an in-house construction team?
Who are we?
Clear Channel UK is one of the UK’s largest Out of Home media and infrastructure companies, operating more than 35,000 advertising sites nationwide and employing 600+ people in 13 locations.
Our mission is To Create the Future of Media, transforming our estate to the benefit of all our stakeholders, through data-driven innovations and infrastructure.
About the role
The engineering team takes responsibility for all aspects of pre-construction including structural design of both our large and small format, outdoor digital advertisement structures and assets.
The team provide an internal technical service to support construction and operation of conventional structures utilising standard steel sections, reinforced concrete, masonry etc as well as small, complex street furniture structures such as bus shelters composed almost entirely of bespoke engineered components.
We are looking to recruit a Structural Engineer within our Construction Department, this position is a fixed term contract for 9-12 months , to cover maternity leave.
What you’ll be doing
Detailed design and analysis of steel, masonry and reinforced concrete structures in accordance with prevailing Eurocodes, British and other relevant Standards and guidelines.
Designing below ground foundations taking account of geotechnical site conditions
Designing non-standard, complex structures and components
Designing structures supported entirely by existing masonry buildings
Developing design solutions which consider construction techniques, operation, maintenance and health and safety
Formulate design solutions, recommend materials, systems and methods, produce detailed design supported by structural analysis and calculations, summarised and presented within concise technical reports.
Producing design documents such as drawings, specifications, instructions etc with sufficient detail and clarity to facilitate construction and brief installation teams.
Resolving site installation issues and technical queries from installation and construction teams
Working primarily in a ‘desk based’ role but occasional site visits to carryout surveys, structural assessments, provide technical support, structural and quality checks during and after installation.
What we’re looking for
Degree Civil / Struct ural Engineering
Experienced user of Creo and/or Solidworks
High competency structural design utilising relevant software (e.g. AutoCAD, CADS, Tekla)
Previous roles within structural design consultants as well as building/engineering contractors, and/or experience of design & build projects
Experience designing masonry structures and/or retrofitted additions/fixings into masonry buildings
Knowledge of relevant legislation and regulations with respect to managing health and safety
Solutions focussed
Excellent communication and interpersonal skills
Ability to manage your own time to meet required deadlines
What’s in it for you?
Salary £38,000 per annum
Remote working with some time in a local office to you
Flexible working hours
25 days paid annual leave plus Bank Holidays
Company Pension Scheme matched to 8%
Healthcare Cash Plan
Life Insurance
Participation in employee discount scheme across hundreds of retailers
Social events
Charity days
Does this sound like to role for you?
If the answer is YES, why not apply today!
At Clear Channel UK we believe in fairness and as an equal opportunities employer we work hard to foster an inclusive environment, a place you can truly be yourself and be treated fairly. We focus purely on skills and behaviours so if you'd like the opportunity to help us create the future of media, out of home, we'd like to hear from you
Waipapa Taumata Rau | The University of Auckland
The University of Auckland is New Zealand’s leading University. With over 6000 academic and professional staff supporting over 46,000 students, we are one of NZ’s largest employers. We have eight academic faculties and 11 service divisions creating a diverse, dynamic and complex organisational culture that demands excellence.
Our significant Property Portfolio represents a vibrant, valuable, and complex network of physical spaces that enable learning and teaching, research and innovation, support the student experience as well as our partnerships and engagement.
The Property Services team has a strong reputation for providing a leading-edge planning and development consultancy that contributes to the success of the University of Auckland through the provision of high-quality physical environments. We build and service some of the largest and most complex buildings and construction projects in the country.
Te Rautaki Tūāpapa, our new Estate Strategy to 2030, reinforces our commitment to sustainability and provides a cohesive, future-focussed and coordinated approach to investment in, and management of, our physical environments throughout the University estate.
Job Description
The opportunity | Te Whiwhinga mahi
We have a fantastic opportunity for a senior level leader to join our Capital Works team as Associate Director – Capital Works.
You will be working across a wide and varied portfolio of projects successfully managing consultant teams focused on delivery of significant projects through to completion phase.
Opportunities include working on specialist research facilities like the recently completed Space Institute in the Engineering School, high-tech teaching spaces like our Financial Lab and student accommodation upgrades right through to our much larger programme builds which include state of the art scientific and medical research facilities; teaching and learning facilities; or projects to support the student experience such as the new Recreation and Wellness Centre prominent on Symonds Street.
This is a pivotal role with key accountability for the planning, resourcing, investigation and delivery of major capital works projects.
Some key aspects and responsibilities include:
Engaging and managing consultant design teams.
Leading internal and external project managers engaged on capital projects
Stakeholder management across the University community and externally.
Ensuring the implementation of the University’s sustainability goals and meeting sustainability criteria identified for each project. Project procurement including calling and evaluation of tenders, tender documents, adherence to standards and consents.
Delivering exciting and cutting-edge design which talks to our place in Tamaki Makaurau, Aotearoa, and the Pacific region.
Construction management including leading internal and external teams, monitoring and recording progress including financials whilst liaising with engineers, consultants, the planning team and other internal stakeholders.
The development and implementing masterplans.
Managing resourcing, investigations, project briefs, programmes, design reports and budget approvals.
Strategic and Risk management.
For more information please see Position Description and Candidate Information Booklet
About you | He kōrero mōu
As an experienced leader, our ideal candidate will demonstrate a high-level ability to influence and communicate effectively to a diverse range of stakeholders. They will demonstrate cultural sensitivity, embrace diversity, and have the technical background to understand projects from multiple viewpoints and this will come from significant commercial and project management experience from a construction/architecture environment. They will operate with energy and passion and will demonstrate a collaborative approach where they partner closely with peers, value the needs of others and model best practice principals and behaviours. Teamwork, customer focus and negotiation skills are vital to the role.
Preference will be given to candidates with a proven understanding of large-scale building programmes and large impact compliance works and those who can demonstrate an ability to think and act strategically to provide valuable input to achieve the best long-term outcomes.
What we offer | Ngā āhuatanga kei a mātou
We offer our staff more than just a job - we offer them an opportunity to be part of a dynamic, world class organisation which provides staff with benefits and support throughout their lives and careers. We have a number of generous benefits that we believe will be important to you:
We realise your time is important to you. We offer a range of leave entitlements, including five weeks annual leave a year , and flexible working arrangements which allow for a greater work life balance.
UoA staff have access to two superannuation plans, Kiwisaver and UniSaver New Zealand, with the University contributing 6.75% annually towards UniSaver.
Your happiness and wellbeing at work is important to us. We have a range of support programmes and benefits available to support health and wellbeing. Discounted health insurance and eye testing, flu jabs, a Recreation Centre on campus, as well as a new state of the art recreation centre being built right now.
Enjoy our beautiful park like grounds and take advantage of the facilities on offer including childcare, parking, cafes, libraries etc.
Additional Information
How to apply | Me pēhea te tuku tono
This position will be advertised both internally and externally and is due to close on the 10th September 2023.
Applications must be submitted online, by the closing date to be considered. Please include your cover letter and your CV highlighting how you can meet the skills and experiences detailed above.
Please reach out to Joshua Chapman j.chapman@auckland.ac.nz for a confidential conversation. Please note we are happy to answer your questions, but we do not accept applications by email.
Equity
The University is committed to meeting its obligations under the Treaty of Waitangi and achieving equity outcomes for staff and students in a safe, inclusive, and equitable environment. For further information on services for Māori, Pacific, women, LGBTQIATakatāpu iMVPFAFF + , people with disabilities, parenting support, flexible work and other personal circumstances go to www.equity.auckland.ac.nz
The University is committed to providing a safe, inclusive, and equitable environment where everyone can thrive. For further information see Te Ara Tautika | the Equity Policy and visit www.equity.auckland.ac.nz
Aug 21, 2023
Full time
Waipapa Taumata Rau | The University of Auckland
The University of Auckland is New Zealand’s leading University. With over 6000 academic and professional staff supporting over 46,000 students, we are one of NZ’s largest employers. We have eight academic faculties and 11 service divisions creating a diverse, dynamic and complex organisational culture that demands excellence.
Our significant Property Portfolio represents a vibrant, valuable, and complex network of physical spaces that enable learning and teaching, research and innovation, support the student experience as well as our partnerships and engagement.
The Property Services team has a strong reputation for providing a leading-edge planning and development consultancy that contributes to the success of the University of Auckland through the provision of high-quality physical environments. We build and service some of the largest and most complex buildings and construction projects in the country.
Te Rautaki Tūāpapa, our new Estate Strategy to 2030, reinforces our commitment to sustainability and provides a cohesive, future-focussed and coordinated approach to investment in, and management of, our physical environments throughout the University estate.
Job Description
The opportunity | Te Whiwhinga mahi
We have a fantastic opportunity for a senior level leader to join our Capital Works team as Associate Director – Capital Works.
You will be working across a wide and varied portfolio of projects successfully managing consultant teams focused on delivery of significant projects through to completion phase.
Opportunities include working on specialist research facilities like the recently completed Space Institute in the Engineering School, high-tech teaching spaces like our Financial Lab and student accommodation upgrades right through to our much larger programme builds which include state of the art scientific and medical research facilities; teaching and learning facilities; or projects to support the student experience such as the new Recreation and Wellness Centre prominent on Symonds Street.
This is a pivotal role with key accountability for the planning, resourcing, investigation and delivery of major capital works projects.
Some key aspects and responsibilities include:
Engaging and managing consultant design teams.
Leading internal and external project managers engaged on capital projects
Stakeholder management across the University community and externally.
Ensuring the implementation of the University’s sustainability goals and meeting sustainability criteria identified for each project. Project procurement including calling and evaluation of tenders, tender documents, adherence to standards and consents.
Delivering exciting and cutting-edge design which talks to our place in Tamaki Makaurau, Aotearoa, and the Pacific region.
Construction management including leading internal and external teams, monitoring and recording progress including financials whilst liaising with engineers, consultants, the planning team and other internal stakeholders.
The development and implementing masterplans.
Managing resourcing, investigations, project briefs, programmes, design reports and budget approvals.
Strategic and Risk management.
For more information please see Position Description and Candidate Information Booklet
About you | He kōrero mōu
As an experienced leader, our ideal candidate will demonstrate a high-level ability to influence and communicate effectively to a diverse range of stakeholders. They will demonstrate cultural sensitivity, embrace diversity, and have the technical background to understand projects from multiple viewpoints and this will come from significant commercial and project management experience from a construction/architecture environment. They will operate with energy and passion and will demonstrate a collaborative approach where they partner closely with peers, value the needs of others and model best practice principals and behaviours. Teamwork, customer focus and negotiation skills are vital to the role.
Preference will be given to candidates with a proven understanding of large-scale building programmes and large impact compliance works and those who can demonstrate an ability to think and act strategically to provide valuable input to achieve the best long-term outcomes.
What we offer | Ngā āhuatanga kei a mātou
We offer our staff more than just a job - we offer them an opportunity to be part of a dynamic, world class organisation which provides staff with benefits and support throughout their lives and careers. We have a number of generous benefits that we believe will be important to you:
We realise your time is important to you. We offer a range of leave entitlements, including five weeks annual leave a year , and flexible working arrangements which allow for a greater work life balance.
UoA staff have access to two superannuation plans, Kiwisaver and UniSaver New Zealand, with the University contributing 6.75% annually towards UniSaver.
Your happiness and wellbeing at work is important to us. We have a range of support programmes and benefits available to support health and wellbeing. Discounted health insurance and eye testing, flu jabs, a Recreation Centre on campus, as well as a new state of the art recreation centre being built right now.
Enjoy our beautiful park like grounds and take advantage of the facilities on offer including childcare, parking, cafes, libraries etc.
Additional Information
How to apply | Me pēhea te tuku tono
This position will be advertised both internally and externally and is due to close on the 10th September 2023.
Applications must be submitted online, by the closing date to be considered. Please include your cover letter and your CV highlighting how you can meet the skills and experiences detailed above.
Please reach out to Joshua Chapman j.chapman@auckland.ac.nz for a confidential conversation. Please note we are happy to answer your questions, but we do not accept applications by email.
Equity
The University is committed to meeting its obligations under the Treaty of Waitangi and achieving equity outcomes for staff and students in a safe, inclusive, and equitable environment. For further information on services for Māori, Pacific, women, LGBTQIATakatāpu iMVPFAFF + , people with disabilities, parenting support, flexible work and other personal circumstances go to www.equity.auckland.ac.nz
The University is committed to providing a safe, inclusive, and equitable environment where everyone can thrive. For further information see Te Ara Tautika | the Equity Policy and visit www.equity.auckland.ac.nz
OWN LONDON is a property design and development studio. We navigate all aspects of a project, from architectural design to construction. We are formed by a team of qualified and highly enthusiastic individuals with extensive experience of designing and delivering projects in London. Due to a strong project pipeline both on site and developments in planning, we are looking to hire a Construction Project Manager to join the team.
THE ROLE
As a Construction Project Manager here at OWN LONDON, you will have experience working for a London based contractor or developer within the residential, commercial and hospitality sectors. You will report to the Construction Director and be responsible for the day-to-day site management and supervision of the project construction team. Our current developments include predominantly prime residential, with some bespoke office and restaurant projects in Central London.
RESPONSIBILITIES
Design co-ordination and checking construction drawings
Setting out & surveying construction works.
To efficiently manage the assigned construction site, within time frame and budget.
To produce a critical path, and plan the process, understanding the timing of each stage.
Monitoring each stage of the process, to ensure it is finished on time.
To manage the safety and welfare of all persons on site.
Liaise with clients and contractors.
Manage project budgets and produce reports.
Manage site staff and subcontractors.
Manage the delivery of the project.
REQUIREMENTS
A Degree in; Engineering, Architecture, Construction or Project Management.
5+ Years Experience working with a London based contractor or developer.
Good JCT contract experience (D&B, Intermediate and Construction Management).
To have a CSCS card and understand all health and safety aspects.
Experience in Site Management and Health and Safety.
It would be advantageous if you have experience as a Quantity Surveyor.
Software/IT skills; Auto-Cad, Microsoft Project, Microsoft Office & Outlook.
Hold a CSCS Card.
Speak professional English.
Personality: Commercially astute, energetic, team player and future leader potential.
Benefits include: Pension Scheme, Team Events & Company Laptop and Telephone.
Employment Type - Full-time
May 26, 2023
Permanent
OWN LONDON is a property design and development studio. We navigate all aspects of a project, from architectural design to construction. We are formed by a team of qualified and highly enthusiastic individuals with extensive experience of designing and delivering projects in London. Due to a strong project pipeline both on site and developments in planning, we are looking to hire a Construction Project Manager to join the team.
THE ROLE
As a Construction Project Manager here at OWN LONDON, you will have experience working for a London based contractor or developer within the residential, commercial and hospitality sectors. You will report to the Construction Director and be responsible for the day-to-day site management and supervision of the project construction team. Our current developments include predominantly prime residential, with some bespoke office and restaurant projects in Central London.
RESPONSIBILITIES
Design co-ordination and checking construction drawings
Setting out & surveying construction works.
To efficiently manage the assigned construction site, within time frame and budget.
To produce a critical path, and plan the process, understanding the timing of each stage.
Monitoring each stage of the process, to ensure it is finished on time.
To manage the safety and welfare of all persons on site.
Liaise with clients and contractors.
Manage project budgets and produce reports.
Manage site staff and subcontractors.
Manage the delivery of the project.
REQUIREMENTS
A Degree in; Engineering, Architecture, Construction or Project Management.
5+ Years Experience working with a London based contractor or developer.
Good JCT contract experience (D&B, Intermediate and Construction Management).
To have a CSCS card and understand all health and safety aspects.
Experience in Site Management and Health and Safety.
It would be advantageous if you have experience as a Quantity Surveyor.
Software/IT skills; Auto-Cad, Microsoft Project, Microsoft Office & Outlook.
Hold a CSCS Card.
Speak professional English.
Personality: Commercially astute, energetic, team player and future leader potential.
Benefits include: Pension Scheme, Team Events & Company Laptop and Telephone.
Employment Type - Full-time
Due to our clients increased workload, we are urgently searching for an a technically proficient candidate with a strong knowledge of Revit, along with exceptional technical detailing and specification skills. This role is open to individuals from either architectural or engineering backgrounds who can create building plans using CAD software, analyse construction plans for potential design issues, lead the design process and team, as well as advise clients on environmental and legal regulations. This opportunity involves joining a reputable AJ100 practice known for its excellence in healthcare and master planning projects. As a member of this team, you will contribute to projects including hospitals, medical centres, research facilities, and master planning. We are always interested to hear from talented people who are searching for new roles or are curious to see what other exciting opportunities are out there. If you feel the role above is not quite what you are looking for, feel free to drop us an email with your CV and portfolio to (url removed)
Apr 30, 2024
Full time
Due to our clients increased workload, we are urgently searching for an a technically proficient candidate with a strong knowledge of Revit, along with exceptional technical detailing and specification skills. This role is open to individuals from either architectural or engineering backgrounds who can create building plans using CAD software, analyse construction plans for potential design issues, lead the design process and team, as well as advise clients on environmental and legal regulations. This opportunity involves joining a reputable AJ100 practice known for its excellence in healthcare and master planning projects. As a member of this team, you will contribute to projects including hospitals, medical centres, research facilities, and master planning. We are always interested to hear from talented people who are searching for new roles or are curious to see what other exciting opportunities are out there. If you feel the role above is not quite what you are looking for, feel free to drop us an email with your CV and portfolio to (url removed)
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design What we offer as a Heat Pump Engineer Base Salary of 40,000 to 50,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone
Apr 30, 2024
Full time
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design What we offer as a Heat Pump Engineer Base Salary of 40,000 to 50,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design F-Gas Category 1 What we offer as a Heat Pump Engineer Base Salary of 45,000 to 55,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone
Apr 30, 2024
Full time
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design F-Gas Category 1 What we offer as a Heat Pump Engineer Base Salary of 45,000 to 55,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone
Finegreen are currently supporting a large NHS organisation in the appointment of an NHS Estates Project Manager this person will be manging minor works programme of circa 600m. Key responsibilities will include: Assist with the full range of duties in the implementation of building and engineering works as part of the Trusts Minor Capital Works Programme; Prepare/oversee designs for project works in accordance with NHS Health Technical Memorandum (HTMs) and Health Building Notes (HBNs), British Standards and all current legislation; Take the technical lead on identified issues related to the management of Estates, Building and Engineering works and providing accurate up to date advice as required; Develop and maintain systems and processes to promote a healthy, safe and secure working environment, ensuring compliance with legal and regulatory requirements, maintaining accurate documentation and reporting any concerns; Provide and receive complex information, communicate estates policy, technical information to senior managers, high level negotiations with contractors, consultant parties, local authority officers and other bodies; Leadership of a small project team, with the ability to undertake business cases from concept to delivery; The ideal candidate will have: Degree in Architecture, building surveying or construction project management; Demonstrate an understanding of HTMs and HBNs and how these are utilised in healthcare building design; Ability to utilise design and/or planning software packages e.g. AutoCAD, Revit, Microsoft Project, Asta Power Project etc.; Experience of working on healthcare projects, ideally for or within the NHS. If you are interested in the role, please contact Donna Larder on (phone number removed) or send your to (url removed)
Apr 30, 2024
Contract
Finegreen are currently supporting a large NHS organisation in the appointment of an NHS Estates Project Manager this person will be manging minor works programme of circa 600m. Key responsibilities will include: Assist with the full range of duties in the implementation of building and engineering works as part of the Trusts Minor Capital Works Programme; Prepare/oversee designs for project works in accordance with NHS Health Technical Memorandum (HTMs) and Health Building Notes (HBNs), British Standards and all current legislation; Take the technical lead on identified issues related to the management of Estates, Building and Engineering works and providing accurate up to date advice as required; Develop and maintain systems and processes to promote a healthy, safe and secure working environment, ensuring compliance with legal and regulatory requirements, maintaining accurate documentation and reporting any concerns; Provide and receive complex information, communicate estates policy, technical information to senior managers, high level negotiations with contractors, consultant parties, local authority officers and other bodies; Leadership of a small project team, with the ability to undertake business cases from concept to delivery; The ideal candidate will have: Degree in Architecture, building surveying or construction project management; Demonstrate an understanding of HTMs and HBNs and how these are utilised in healthcare building design; Ability to utilise design and/or planning software packages e.g. AutoCAD, Revit, Microsoft Project, Asta Power Project etc.; Experience of working on healthcare projects, ideally for or within the NHS. If you are interested in the role, please contact Donna Larder on (phone number removed) or send your to (url removed)
The Role: The role will include providing technical support during the construction phase and during project close-out, to ensure that a number of tasks are carried out on-site with regard to Safety, Environment and Efficiency, and to assist the Site Agent and Foreman with the efficient and effective running of the site. The Civil Engineer will also plan to enable activities to ensure timely work packages for the construction teams, which are safe and in line with the company procedures. Key Responsibilities: Engaging with site operatives Maintain a register of operatives and staff on-site detailing their training records Identify training needs of site personnel and inform them of upcoming training bookings Site documentation and statistics Ensure all paperwork and posters are displayed on the site office wall and kept up to date Ensure all reported near misses are recorded following procedure and submitted to the Office Manager each week Ensure all Safety and Environmental Statistics are recorded and sent to management monthly Ensure current revisions of drawings are the ones being used on the site Upload relevant site information onto Envoy, ensuring it is up to date Deliver toolbox talks and present Cascade to site operatives, ensuring Cascade registers are completed and returned Maintain a site diary, site correspondence file and photographic record of the project Produce and display a roles and responsibilities chart, establishing the responsibility for each role on site Monitor plant and equipment Produce a site register to record all items to be inspected under LOLER and PUWER Regulations, and ensure they are regularly checked Record the condition of the plant arriving on-site on a form with photographs Check the weekly plant sheet against the actual plant on-site and ensure any anomalies are resolved through communication with the Cost Manager Technical Support Provide support with technical information/advice Propose and/or develop value engineered solutions (during optioneering and design phases) Produce ITPs and Task Briefings Work with the Site Agent to produce a 2-week look ahead report Assist with the production of Site Diaries and Allocation Sheets Key Measures & Targets: Accurate and timely setting out of the works Timely handover of works and Quality records without outstanding defects Production of accurate records, drawing registers and weekly diaries Key Relationships: Site team Customer technical representative Person Specification: The successful candidate is likely to meet all the following criteria: Essential Sound knowledge of construction methods, health and safety, and legal regulations Awareness of the use of robotic total station or EDM instruments Degree/HNC qualified, or equivalent, in civil engineering Excellent communication skills with the ability to liaise effectively with both clients and staff Desirable Experience in using AutoCAD and MS Office Temporary-works co-ordination CSCS card Cable avoidance training First aid training Confined space training
Apr 30, 2024
Full time
The Role: The role will include providing technical support during the construction phase and during project close-out, to ensure that a number of tasks are carried out on-site with regard to Safety, Environment and Efficiency, and to assist the Site Agent and Foreman with the efficient and effective running of the site. The Civil Engineer will also plan to enable activities to ensure timely work packages for the construction teams, which are safe and in line with the company procedures. Key Responsibilities: Engaging with site operatives Maintain a register of operatives and staff on-site detailing their training records Identify training needs of site personnel and inform them of upcoming training bookings Site documentation and statistics Ensure all paperwork and posters are displayed on the site office wall and kept up to date Ensure all reported near misses are recorded following procedure and submitted to the Office Manager each week Ensure all Safety and Environmental Statistics are recorded and sent to management monthly Ensure current revisions of drawings are the ones being used on the site Upload relevant site information onto Envoy, ensuring it is up to date Deliver toolbox talks and present Cascade to site operatives, ensuring Cascade registers are completed and returned Maintain a site diary, site correspondence file and photographic record of the project Produce and display a roles and responsibilities chart, establishing the responsibility for each role on site Monitor plant and equipment Produce a site register to record all items to be inspected under LOLER and PUWER Regulations, and ensure they are regularly checked Record the condition of the plant arriving on-site on a form with photographs Check the weekly plant sheet against the actual plant on-site and ensure any anomalies are resolved through communication with the Cost Manager Technical Support Provide support with technical information/advice Propose and/or develop value engineered solutions (during optioneering and design phases) Produce ITPs and Task Briefings Work with the Site Agent to produce a 2-week look ahead report Assist with the production of Site Diaries and Allocation Sheets Key Measures & Targets: Accurate and timely setting out of the works Timely handover of works and Quality records without outstanding defects Production of accurate records, drawing registers and weekly diaries Key Relationships: Site team Customer technical representative Person Specification: The successful candidate is likely to meet all the following criteria: Essential Sound knowledge of construction methods, health and safety, and legal regulations Awareness of the use of robotic total station or EDM instruments Degree/HNC qualified, or equivalent, in civil engineering Excellent communication skills with the ability to liaise effectively with both clients and staff Desirable Experience in using AutoCAD and MS Office Temporary-works co-ordination CSCS card Cable avoidance training First aid training Confined space training
About BG&E BG&E is an innovative, employee-owned consulting engineering business. Our team of more than 700 highly skilled people, in 15 offices across the United Kingdom, Australia, New Zealand, Singapore, and the Middle East, design and deliver engineering solutions for clients in the Property, Transport, Ports and Marine, Water, Renewables and Defence sectors. We collaborate with leading contractors, developers, architects, planners, financiers and government agencies, to create projects that make a difference to people's lives. The Role: Our London office is looking for a Senior/Associate Structural Engineer to form a key part of a growing building engineering team.We have a varied range of project opportunities in both scale and typology, including international high rise, significant adaptive re-use schemes, detailed design work and niche architectural projects.We work with a wide range of clients including major UK developers and contractors. You will work with the Structures' Lead to deliver this varied portfolio and to assist in the management and development of the team of structural engineers and technicians, as well as liaising with the other disciplines in our team as necessary (we offer civil, façades,infrastructure and bridge engineering as well as geotechnical consultancy). As noted, the nature and type of work will be varied.You will lead and contribute to projects in various sectors at different stages (concept design, detailed design and construction).Whilst the majority of our work is UK-based, we are an international practice and often work in other geographies.Knowledge and experience of delivering work in a more global context would be welcome. We are looking for an individual with a strong base of technical skills coupled with excellent organisational and communication skills, gained in either a multi-disciplinary or engineering consultancy environment who now wants to enhance and diversify these skills within a growing organisation that will support their future development. The role will include responsibilities including: Design delivery: prepare, review and approve calculations, drawings and other documentation. Managing a design team and providing guidance and mentoring to junior members. Delivering multiple small projects and or tasks within budget and to schedule. Communicating with clients, review and agree scope for elements of work, prepare proposals and manage project finances. About You: You will be a key member of the BG&E Engineering team, where you'll strengthen our skills and capabilities and provide support to our engineering and drafting teams. As a successful applicant you'll have: At least eight years of relevant experience, ideally within an engineering consultancy or the construction industry. Qualified to MEng level or above. Excellent time management and the ability prioritize execution of work. High level of attention to detail. Be a Chartered Engineer (CEng) or equivalent level. Experience of high-rise design is preferable. Strong understanding of holistic sustainable design from a structural engineering perspective. Be familiar with embodied carbon as a design parameter and strive for solutions which are effective from a sustainability perspective. Experience in the assessment and re-use of existing structures (concrete and steel, and ideally masonry and timber). Experience of the utilisation of timber in modern structural design. Work independently and demonstrated ability to lead small teams in the preparation of design related to structures and temporary works. Strong first principles knowledge and understanding in structural engineering. Relevant design and delivery experience with reinforced concrete, post-tensioned concrete, structural steel, timber and masonry structures. Familiar with analysis and design software (Etabs, Strand7, Spacegass, RAPT, RAM Concept, SAFE, Mathcad, Tedds). Good knowledge of current building standards, analysis and codes of practice. Good understanding of BIM project requirements. Able to communicate and manage drafters to deliver compliant design. Life at BG&E Vibrant central London location (London Bridge/Bermondsey). Competitive remuneration. Be part of a team of talented, dedicated engineers who bring a unique offering to the UK market. Close links with our offices in the rest of the world. Be part of a 'can do' philosophy. Diversity and Inclusion Equality is part of BG&E's DNA.We value who you are - it begins with our values and continues through our culture - and is fostered throughout our workplaces.We recognise and celebrate difference and encourage our people and potential candidates to be comfortable in bringing your complete self to work. Wellbeing, Health and Safety We ensure our people enjoy healthy workplaces, deploy practices that reduce risk, comply with workplace Health & Safety regulations, impose zero harm to the communities that we operate in and support each other so we can all go home to safely every day.
Apr 30, 2024
Full time
About BG&E BG&E is an innovative, employee-owned consulting engineering business. Our team of more than 700 highly skilled people, in 15 offices across the United Kingdom, Australia, New Zealand, Singapore, and the Middle East, design and deliver engineering solutions for clients in the Property, Transport, Ports and Marine, Water, Renewables and Defence sectors. We collaborate with leading contractors, developers, architects, planners, financiers and government agencies, to create projects that make a difference to people's lives. The Role: Our London office is looking for a Senior/Associate Structural Engineer to form a key part of a growing building engineering team.We have a varied range of project opportunities in both scale and typology, including international high rise, significant adaptive re-use schemes, detailed design work and niche architectural projects.We work with a wide range of clients including major UK developers and contractors. You will work with the Structures' Lead to deliver this varied portfolio and to assist in the management and development of the team of structural engineers and technicians, as well as liaising with the other disciplines in our team as necessary (we offer civil, façades,infrastructure and bridge engineering as well as geotechnical consultancy). As noted, the nature and type of work will be varied.You will lead and contribute to projects in various sectors at different stages (concept design, detailed design and construction).Whilst the majority of our work is UK-based, we are an international practice and often work in other geographies.Knowledge and experience of delivering work in a more global context would be welcome. We are looking for an individual with a strong base of technical skills coupled with excellent organisational and communication skills, gained in either a multi-disciplinary or engineering consultancy environment who now wants to enhance and diversify these skills within a growing organisation that will support their future development. The role will include responsibilities including: Design delivery: prepare, review and approve calculations, drawings and other documentation. Managing a design team and providing guidance and mentoring to junior members. Delivering multiple small projects and or tasks within budget and to schedule. Communicating with clients, review and agree scope for elements of work, prepare proposals and manage project finances. About You: You will be a key member of the BG&E Engineering team, where you'll strengthen our skills and capabilities and provide support to our engineering and drafting teams. As a successful applicant you'll have: At least eight years of relevant experience, ideally within an engineering consultancy or the construction industry. Qualified to MEng level or above. Excellent time management and the ability prioritize execution of work. High level of attention to detail. Be a Chartered Engineer (CEng) or equivalent level. Experience of high-rise design is preferable. Strong understanding of holistic sustainable design from a structural engineering perspective. Be familiar with embodied carbon as a design parameter and strive for solutions which are effective from a sustainability perspective. Experience in the assessment and re-use of existing structures (concrete and steel, and ideally masonry and timber). Experience of the utilisation of timber in modern structural design. Work independently and demonstrated ability to lead small teams in the preparation of design related to structures and temporary works. Strong first principles knowledge and understanding in structural engineering. Relevant design and delivery experience with reinforced concrete, post-tensioned concrete, structural steel, timber and masonry structures. Familiar with analysis and design software (Etabs, Strand7, Spacegass, RAPT, RAM Concept, SAFE, Mathcad, Tedds). Good knowledge of current building standards, analysis and codes of practice. Good understanding of BIM project requirements. Able to communicate and manage drafters to deliver compliant design. Life at BG&E Vibrant central London location (London Bridge/Bermondsey). Competitive remuneration. Be part of a team of talented, dedicated engineers who bring a unique offering to the UK market. Close links with our offices in the rest of the world. Be part of a 'can do' philosophy. Diversity and Inclusion Equality is part of BG&E's DNA.We value who you are - it begins with our values and continues through our culture - and is fostered throughout our workplaces.We recognise and celebrate difference and encourage our people and potential candidates to be comfortable in bringing your complete self to work. Wellbeing, Health and Safety We ensure our people enjoy healthy workplaces, deploy practices that reduce risk, comply with workplace Health & Safety regulations, impose zero harm to the communities that we operate in and support each other so we can all go home to safely every day.
Role overview ID: Entity: Vistry Services Region: Vistry Services Department: Technical Contract Type: Fixed Term Contract - Full Time Job Location: Coleshill, West Midlands Date Posted: 16.04.2024 We have a new opportunity for a Group Architectural Technician to join our team within Vistry Services, at our Coleshill office. As our Group Architectural Technician, you will be responsible for supporting the Group Design and Technical functions in its day-to-day duties by coordinating the flow of data and information with both internal colleagues and external stakeholders. The main purpose of the Group Design and Technical team is to design and maintain Vistry's standard product - its house types - whilst supporting the regional businesses in delivering the standard product. The standard product must always be complimentary to the strategic growth of the business, compliant with national (English) regulatory requirements, economic to build, aesthetically pleasing to both local authorities and purchasers, assist in the creation of strong placemaking and respond to our customer's needs. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Background in Architectural Technology. Previous experience in Residential Housing sector. Experience with Auto CAD and Revit is preferable. Strong attention to detail. Ability to communicate well with individuals at all levels. Proficient in MS Office programmes. Analytical approach. Positive attitude towards teamwork. You have the ability to work under pressure and meet deadlines. You have excellent team working and feel comfortable with communicating at all levels. You will need to demonstrate behaviors necessary to align with our corporate values. Educated to HNC/HND in a construction related qualification. More about the Group Architectural Technician role Assist with the collation, checking and approval of all ancillary specialist drawings, including: Beam and block ground floors, precast upper floors, Hot and cold water supply, heating, System 3 ventilation. Kitchens, Stairs, Joists, Trusses, Lintels Working with the Group Senior Architectural Technician to manage the delivery and maintenance of the Group standard house type portfolio. Ensure all drawings, details and third-party information are accurate, commercially suitable, and compliant with current regulations. Provide support in the creation and delivery of the new Group 2025 house type collection and then maintain them going forward. Provide support in the delivery and maintenance of Group Standard Details. Manage and review Consultants working on the standard product including, but not limited to, architects and structural engineers. Manage warranty Type Approval process where required and review approval to ensure that the conditions are addressed. Ensure that information is to the agreed Group construction and finishing specifications. Liaise with regional business units and attend meetings to progress all relevant Technical matters. And assist in resolving technical related queries. Provide support in the delivery and maintenance of the Group generic Temporary Works details. Ensure cost effective design control and buildability. Ensure that new regulation requirements are anticipated and incorporated as required. Expect and encourage continued change and improvement within the Company. Support and assist in the management of the Group Technical mailbox. Manage the collation and checking of all ancillary specialist drawings, including hot water supply, heating, kitchen, stair, lintels, beam and block ground floors, precast upper floors. Assist the business in achieving BIM Level 2 certification. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Apr 30, 2024
Full time
Role overview ID: Entity: Vistry Services Region: Vistry Services Department: Technical Contract Type: Fixed Term Contract - Full Time Job Location: Coleshill, West Midlands Date Posted: 16.04.2024 We have a new opportunity for a Group Architectural Technician to join our team within Vistry Services, at our Coleshill office. As our Group Architectural Technician, you will be responsible for supporting the Group Design and Technical functions in its day-to-day duties by coordinating the flow of data and information with both internal colleagues and external stakeholders. The main purpose of the Group Design and Technical team is to design and maintain Vistry's standard product - its house types - whilst supporting the regional businesses in delivering the standard product. The standard product must always be complimentary to the strategic growth of the business, compliant with national (English) regulatory requirements, economic to build, aesthetically pleasing to both local authorities and purchasers, assist in the creation of strong placemaking and respond to our customer's needs. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Background in Architectural Technology. Previous experience in Residential Housing sector. Experience with Auto CAD and Revit is preferable. Strong attention to detail. Ability to communicate well with individuals at all levels. Proficient in MS Office programmes. Analytical approach. Positive attitude towards teamwork. You have the ability to work under pressure and meet deadlines. You have excellent team working and feel comfortable with communicating at all levels. You will need to demonstrate behaviors necessary to align with our corporate values. Educated to HNC/HND in a construction related qualification. More about the Group Architectural Technician role Assist with the collation, checking and approval of all ancillary specialist drawings, including: Beam and block ground floors, precast upper floors, Hot and cold water supply, heating, System 3 ventilation. Kitchens, Stairs, Joists, Trusses, Lintels Working with the Group Senior Architectural Technician to manage the delivery and maintenance of the Group standard house type portfolio. Ensure all drawings, details and third-party information are accurate, commercially suitable, and compliant with current regulations. Provide support in the creation and delivery of the new Group 2025 house type collection and then maintain them going forward. Provide support in the delivery and maintenance of Group Standard Details. Manage and review Consultants working on the standard product including, but not limited to, architects and structural engineers. Manage warranty Type Approval process where required and review approval to ensure that the conditions are addressed. Ensure that information is to the agreed Group construction and finishing specifications. Liaise with regional business units and attend meetings to progress all relevant Technical matters. And assist in resolving technical related queries. Provide support in the delivery and maintenance of the Group generic Temporary Works details. Ensure cost effective design control and buildability. Ensure that new regulation requirements are anticipated and incorporated as required. Expect and encourage continued change and improvement within the Company. Support and assist in the management of the Group Technical mailbox. Manage the collation and checking of all ancillary specialist drawings, including hot water supply, heating, kitchen, stair, lintels, beam and block ground floors, precast upper floors. Assist the business in achieving BIM Level 2 certification. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Role overview ID: Entity: Vistry Region: Vistry East Anglia Department: Technical Contract Type: Permanent - Full Time Job Location: Peterborough, Cambridgeshire Date Posted: 26.02.2024 We have a new opportunity for a Technical Coordinator to join our team within the Vistry East division, at our Peterborough office. As our Technical Coordinator, you will be able to demonstrate a pro-active approach to design development, working within a team environment from the project's inception through to its completion. The Technical Coordinator will be tasked with the control of the complete design process involving the management of consultants, liaison with the relevant statutory and local authorities, Client/Housing Associations and other internal and external stakeholders as necessary. To ensure the designs complies to all necessary legislation, associated standards and Vistry Group specification, policy, and procedures. The role requires an excellent base level of Health & Safety, Environmental and Technical knowledge, including a good working knowledge of the Highways & Drainage, Building Regulations, NHBC Standards, Planning, and Affordable Housing. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality BTEC HND/HNC in Design, Construction or Civil Engineering Previous experience working within a technical coordination role at a residential house builder. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word. Excellent organization and time management with ability to multitask. Commercially aware. CSCS card qualification. Ability to make decisions within authority. Positive attitude towards teamwork. Experienced in analysing problems and delivering solutions. Strong technical knowledge and attention to detail. More about the Technical Coordinator role Manage site as agreed with the Technical Director/Manager from design stage to post completion, in line with delivery programme and key dates. Undertake the Principal Designer role as defined within the Construction Design & Management Regulation 2015 and completion of all necessary Health, Safety & Environmental documents, in line with Group Policy & procedures. Prepare Pre Development programme and and work with colleagues, partners and stakeholders to manage risks through the project. Co-ordinate delivery of surveys & reports required for the development and manage associated requirements from design to completion. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with Group procedures. Co-ordinate consultants to deliver the civil engineering designs including legal plans and the house type working drawing packs including ancillary designs. Undertaking value engineering assessments and ensure buildability is considered. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Apr 30, 2024
Full time
Role overview ID: Entity: Vistry Region: Vistry East Anglia Department: Technical Contract Type: Permanent - Full Time Job Location: Peterborough, Cambridgeshire Date Posted: 26.02.2024 We have a new opportunity for a Technical Coordinator to join our team within the Vistry East division, at our Peterborough office. As our Technical Coordinator, you will be able to demonstrate a pro-active approach to design development, working within a team environment from the project's inception through to its completion. The Technical Coordinator will be tasked with the control of the complete design process involving the management of consultants, liaison with the relevant statutory and local authorities, Client/Housing Associations and other internal and external stakeholders as necessary. To ensure the designs complies to all necessary legislation, associated standards and Vistry Group specification, policy, and procedures. The role requires an excellent base level of Health & Safety, Environmental and Technical knowledge, including a good working knowledge of the Highways & Drainage, Building Regulations, NHBC Standards, Planning, and Affordable Housing. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality BTEC HND/HNC in Design, Construction or Civil Engineering Previous experience working within a technical coordination role at a residential house builder. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word. Excellent organization and time management with ability to multitask. Commercially aware. CSCS card qualification. Ability to make decisions within authority. Positive attitude towards teamwork. Experienced in analysing problems and delivering solutions. Strong technical knowledge and attention to detail. More about the Technical Coordinator role Manage site as agreed with the Technical Director/Manager from design stage to post completion, in line with delivery programme and key dates. Undertake the Principal Designer role as defined within the Construction Design & Management Regulation 2015 and completion of all necessary Health, Safety & Environmental documents, in line with Group Policy & procedures. Prepare Pre Development programme and and work with colleagues, partners and stakeholders to manage risks through the project. Co-ordinate delivery of surveys & reports required for the development and manage associated requirements from design to completion. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with Group procedures. Co-ordinate consultants to deliver the civil engineering designs including legal plans and the house type working drawing packs including ancillary designs. Undertaking value engineering assessments and ensure buildability is considered. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Role overview ID: Entity: Vistry Region: Vistry Devon South West Department: Technical Contract Type: Permanent - Full Time Job Location: Exeter , Devon Date Posted: 09.04.2024 We have a fantastic opportunity for a Technical Manager to join our team within Vistry Devon South West, at our Exeter office. As our Technical Manager you will be able to demonstrate a pro-active approach to design development, working within a team environment from the land acquisition project's inception through to its completion. You will be able to contribute to the wider strategy of the department and business unit as necessary and advise on industry changes identifying the risk & opportunities. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare and Dental Insurance Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality BTEC HND/HNC in Design, Construction or Civil Engineering At least 5 years' experience working within a technical role at a residential house builder. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word, Proven ability in a Technical Manager role of assessing technical aspect for land opportunities and delivering design for projects on time, to budget and quality standards with high customer satisfaction results. Excellent organisation and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work as a team member. Experienced in analysing problems and delivering solutions. Strong mathematical ability. Be able to design and interpret the designs and technical demands of others. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve customer satisfaction. Desirable - Further education, i.e., CIOB Principle Designer and associated Health and Safety training/ qualifications. CSCS card qualification. Use of Viewpoint drawing management system. Proficient use of Auto Cad. Management of technical fees and services cost to complete. Continued professional development and keeping up to date with changes within the industry. Advising the BU and assessing the risk & opportunity Experience in managing and developing people Understanding of wider Business demands and strategy More about the Technical Manager role To inform the land team during site acquisition and provide the full technical due diligence with a detailed technical report, predevelopment programme with a delivery plan and fee/cost assessment. Manage sites as agreed with the Technical Director/Manager from design stage to post completion, in line with delivery programme and key dates. Undertake the Principal Designer role as defined within the Construction Design & Management Regulation 2015 and completion of all necessary Health, Safety & Environmental documents, in line with Group Policy & procedures. Co-ordinate delivery of surveys & reports required for the development and manage associated requirements from design to completion. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with Group procedures. Co-ordinate consultants to deliver the civil engineering designs including legal plans and the house type working drawing packs. Obtaining and collating all ancillary specialist drawings including hot water supply, heating, kitchen, stair, lintels, p.c. ground floors, and precast upper floors. Undertaking value engineering assessments and ensure buildability is considered. Co-ordinate submission of designs and securing technical approvals for agreements such as S104, S38 & S278 followed by timely completion of legal agreements. Co-ordinate utility designs and initial mains laying onto site, ensuring legal agreements completed in timely manner. Co-ordinate information and liaise with architects, civil and structural engineers, and landscape architects, ensuring consistency between various designs. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and
Apr 30, 2024
Full time
Role overview ID: Entity: Vistry Region: Vistry Devon South West Department: Technical Contract Type: Permanent - Full Time Job Location: Exeter , Devon Date Posted: 09.04.2024 We have a fantastic opportunity for a Technical Manager to join our team within Vistry Devon South West, at our Exeter office. As our Technical Manager you will be able to demonstrate a pro-active approach to design development, working within a team environment from the land acquisition project's inception through to its completion. You will be able to contribute to the wider strategy of the department and business unit as necessary and advise on industry changes identifying the risk & opportunities. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare and Dental Insurance Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality BTEC HND/HNC in Design, Construction or Civil Engineering At least 5 years' experience working within a technical role at a residential house builder. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word, Proven ability in a Technical Manager role of assessing technical aspect for land opportunities and delivering design for projects on time, to budget and quality standards with high customer satisfaction results. Excellent organisation and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work as a team member. Experienced in analysing problems and delivering solutions. Strong mathematical ability. Be able to design and interpret the designs and technical demands of others. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve customer satisfaction. Desirable - Further education, i.e., CIOB Principle Designer and associated Health and Safety training/ qualifications. CSCS card qualification. Use of Viewpoint drawing management system. Proficient use of Auto Cad. Management of technical fees and services cost to complete. Continued professional development and keeping up to date with changes within the industry. Advising the BU and assessing the risk & opportunity Experience in managing and developing people Understanding of wider Business demands and strategy More about the Technical Manager role To inform the land team during site acquisition and provide the full technical due diligence with a detailed technical report, predevelopment programme with a delivery plan and fee/cost assessment. Manage sites as agreed with the Technical Director/Manager from design stage to post completion, in line with delivery programme and key dates. Undertake the Principal Designer role as defined within the Construction Design & Management Regulation 2015 and completion of all necessary Health, Safety & Environmental documents, in line with Group Policy & procedures. Co-ordinate delivery of surveys & reports required for the development and manage associated requirements from design to completion. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with Group procedures. Co-ordinate consultants to deliver the civil engineering designs including legal plans and the house type working drawing packs. Obtaining and collating all ancillary specialist drawings including hot water supply, heating, kitchen, stair, lintels, p.c. ground floors, and precast upper floors. Undertaking value engineering assessments and ensure buildability is considered. Co-ordinate submission of designs and securing technical approvals for agreements such as S104, S38 & S278 followed by timely completion of legal agreements. Co-ordinate utility designs and initial mains laying onto site, ensuring legal agreements completed in timely manner. Co-ordinate information and liaise with architects, civil and structural engineers, and landscape architects, ensuring consistency between various designs. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and
Role overview ID: Entity: Vistry Region: Vistry Cotswolds Department: Technical Contract Type: Permanent - Full Time Job Location: Cheltenham, Gloucestershire Date Posted: 24.04.2024 We have a fantastic opportunity for a Project Manager to join our team within Vistry Cotswolds, at our office in Cheltenham. As our Project Manager you will will manage key information, engineering and working drawing packages to enable any given residential development to be built as intended and to obtain all necessary technical approvals. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Good level of IT literacy with experience of AutoCAD, Outlook, Excel and Word. Revit experience would be an advantage. Excellent organisation and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work effectively in a team. Experienced in analysing problems and delivering solutions. Strong mathematical ability. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve internal and external customer satisfaction. Able to work under pressure, and accept criticism of work. Good level of communication skills, with the necessity to liaise with internal staff and external bodies. Be practical and methodical with good analytical skills. Willing to work extra to meet deadlines as and when the business needs require it. More about the Project Manager role Manage sites as agreed with the Technical Director from design stage to post completion, in line with the delivery programme / key date schedule. Review reports from Land department and manage associated requirements from design to completion. Manage consultants to deliver the Civil Engineering designs, Structural Engineering and contamination remediation requirements. Manage consultants to deliver the house type working drawings packs and liaise with key suppliers to provide ancillary drawing information for tender and construction. Undertaking value engineering assessments and ensure buildability of designs. Manage submission of designs and securing technical approvals for agreements such as S104, S38 and S278. Following technical approval being granted, managing timely completion of legal agreements with external solicitors. Manage progression of utility designs from land handover to initial mains laying onto site, ensuring legal agreements completed in timely manner. Provide information for Housing Association contracts and attendance of progress meetings. Manage the accuracy of information supplied by all departments to ensure no discrepancies. Submission of all information to NHBC and obtaining approval of same, obtaining SAP Assessments together with PEA and EPC's, Secure by Design Approval and Robust Details. Obtaining and collating all ancillary specialist drawings including heating and plumbing, kitchens, stairs, joists, trusses, lintels, pc ground floors and pc upper floors. Attending Pre-tender meetings and briefing all departments on matters relating to the engineering and working drawings. Manage information and liaise with Architects, Civil and Structural Engineers, ensuring consistency between various designs. Prepare all drawings and documents for Pre-tender meetings in line with the Regional Key Date Schedule. To monitor and report technical and development fees. Resolve all technical related queries including conducting site visits as required. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Apr 30, 2024
Full time
Role overview ID: Entity: Vistry Region: Vistry Cotswolds Department: Technical Contract Type: Permanent - Full Time Job Location: Cheltenham, Gloucestershire Date Posted: 24.04.2024 We have a fantastic opportunity for a Project Manager to join our team within Vistry Cotswolds, at our office in Cheltenham. As our Project Manager you will will manage key information, engineering and working drawing packages to enable any given residential development to be built as intended and to obtain all necessary technical approvals. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible Up to 33 days annual leave plus bank holidays Private Healthcare Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Good level of IT literacy with experience of AutoCAD, Outlook, Excel and Word. Revit experience would be an advantage. Excellent organisation and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work effectively in a team. Experienced in analysing problems and delivering solutions. Strong mathematical ability. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve internal and external customer satisfaction. Able to work under pressure, and accept criticism of work. Good level of communication skills, with the necessity to liaise with internal staff and external bodies. Be practical and methodical with good analytical skills. Willing to work extra to meet deadlines as and when the business needs require it. More about the Project Manager role Manage sites as agreed with the Technical Director from design stage to post completion, in line with the delivery programme / key date schedule. Review reports from Land department and manage associated requirements from design to completion. Manage consultants to deliver the Civil Engineering designs, Structural Engineering and contamination remediation requirements. Manage consultants to deliver the house type working drawings packs and liaise with key suppliers to provide ancillary drawing information for tender and construction. Undertaking value engineering assessments and ensure buildability of designs. Manage submission of designs and securing technical approvals for agreements such as S104, S38 and S278. Following technical approval being granted, managing timely completion of legal agreements with external solicitors. Manage progression of utility designs from land handover to initial mains laying onto site, ensuring legal agreements completed in timely manner. Provide information for Housing Association contracts and attendance of progress meetings. Manage the accuracy of information supplied by all departments to ensure no discrepancies. Submission of all information to NHBC and obtaining approval of same, obtaining SAP Assessments together with PEA and EPC's, Secure by Design Approval and Robust Details. Obtaining and collating all ancillary specialist drawings including heating and plumbing, kitchens, stairs, joists, trusses, lintels, pc ground floors and pc upper floors. Attending Pre-tender meetings and briefing all departments on matters relating to the engineering and working drawings. Manage information and liaise with Architects, Civil and Structural Engineers, ensuring consistency between various designs. Prepare all drawings and documents for Pre-tender meetings in line with the Regional Key Date Schedule. To monitor and report technical and development fees. Resolve all technical related queries including conducting site visits as required. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyone treated fairly and respectfully, with diversity and inclusion a top priority and reasonable adjustments provided during the application process. From memories and communities to worthwhile careers, we're making Vistry. Benefits Agile Working Offers a flexible way of working. Annual Leave Enjoy 28 days' holiday plus all UK Bank Holidays. There are options to carry leave forwards and buy up to 5 days. Pension with Legal & General Eligible employees are auto-enrolled. You contribute 4%, we contribute 6%. Salary Sacrifice and options to increase contributions available. Volunteer Days With 2 paid volunteer days a year, you can give back to communities and charities. Why Vistry Joining Vistry is just the start of building your perfect career. In return for your passion and skills, we invest in your future, providing all the support and training you need to thrive in your career and realise your potential. Our work is rewarding in itself, but we also offer a range of financial, lifestyle, health and wellbeing benefits, plus plenty of recognition incentives. We value you and everything you help us build as we make Vistry together.
Role overview ID: Entity: Vistry Region: Vistry South Central Midlands Department: Technical Contract Type: Permanent - Full Time Job Location: Coleshill, West Midlands Date Posted: 22.03.2024 We have a fantastic opportunity for an Technical Coordinator to join our team within Vistry South Central Midlands at our Coleshill office. As our Technical Coordinator you will be responsible for the successful implementation of all technical superstructure tasks including the production and management of concise, accurate and detailed construction drawings throughout the life cycle of numerous and evolving projects. In addition, effectively communicating and supporting all regional and group departments will be required to ensure the business goals are achieved. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare and Dental Insurance Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Architectural Technologist background BTEC HND/HNC in Design, Construction or equivalent At least 5 years' experience working within a technical role at a residential house builder or consultancy. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word, Proven ability in an Architectural Technologist role of delivering design for projects on time, to budget and quality standards with high customer satisfaction results. Excellent organization and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work as a team member. Be practical and methodical with good analytical skills and able to suggest solutions to problems. Strong mathematical ability. Be able to design and interpret the designs and technical demands of others. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve customer satisfaction. Able to work under pressure, and accept honest feedback on one's work Be able to work effectively in a team Good level of communication skills, with the necessity to liaise with internal staff and external bodies Willing to work extra to meet deadlines as and when the business needs require it Desirable - Further education, i.e. MCIAT/MCIOB CSCS card qualification Use of Viewpoint drawing management system. Management of technical fees and services cost to complete. Continued professional development and keeping up to date with changes within the industry. More about the Technical Coordinator role Negotiate effectively with a wide range of organisations, statutory bodies and interest groups to achieve the desired design outcomes. Communicate effectively with all relevant departments in writing, verbally and in presentation format to provide accurate and timely information. Establish and maintain strong and respected working relationships with internal departments, local authorities and companies throughout the region. Undertake key aspects of the Principal Designer role as defined within the Construction Design & Management Regulation 2015. Completion of all necessary Health, Safety & Environmental documents, in line with group policy. Co-ordinate consultants or when required be able to personally produce house type working drawings and liaise with key suppliers to provide ancillary information for tender, construction and sales packs. Be conversant with current building regulations, procedures, construction methods, materials costs and general market conditions in relation to Company products Undertaking value engineering assessments and ensure buildability. Submission of all information to NHBC and obtaining approval of same, obtaining SAP Assessments together with PEA' and EPC's and Robust Standard Details. Attend regional sites to resolve technical and construction related problems. Detail and monitor acceptable solutions to resolve. Attending and chairing Pre-Start Meetings and briefing all departments on matters related to superstructures. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with group procedures. Co-ordinate the accuracy of information supplied by all departments to ensure no discrepancies. Provide information for Housing Association contracts and attendance of progress meetings, Attend departmental meetings as required. Ensure all relevant stakeholders are informed of key departmental developments. Ensure you have read the Company's health and safety policies and procedures observe them at all times. Reporting any accidents or near misses immediately to your Manager and record them in the accident book. Ensure your workplace is kept tidy and any hazards are eliminated or reported to your line manager. Always wear appropriate protective clothing on site. Attend all health and safety training as required by the Company Coach and support team members as required. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyon
Apr 30, 2024
Full time
Role overview ID: Entity: Vistry Region: Vistry South Central Midlands Department: Technical Contract Type: Permanent - Full Time Job Location: Coleshill, West Midlands Date Posted: 22.03.2024 We have a fantastic opportunity for an Technical Coordinator to join our team within Vistry South Central Midlands at our Coleshill office. As our Technical Coordinator you will be responsible for the successful implementation of all technical superstructure tasks including the production and management of concise, accurate and detailed construction drawings throughout the life cycle of numerous and evolving projects. In addition, effectively communicating and supporting all regional and group departments will be required to ensure the business goals are achieved. We are pleased to say, this role can accommodate agile working arrangements. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Agile working possible (dependent on role) Up to 33 days annual leave plus bank holidays Private Healthcare and Dental Insurance Competitive contributory pension scheme Life assurance - 4 x your annual salary Share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality Architectural Technologist background BTEC HND/HNC in Design, Construction or equivalent At least 5 years' experience working within a technical role at a residential house builder or consultancy. Good level of IT literacy with experience of AutoCAD, Revit, Outlook, Excel & Word, Proven ability in an Architectural Technologist role of delivering design for projects on time, to budget and quality standards with high customer satisfaction results. Excellent organization and time management with ability to multitask. Commercially aware. Ability to make decisions within authority. Able to lead and work as a team member. Be practical and methodical with good analytical skills and able to suggest solutions to problems. Strong mathematical ability. Be able to design and interpret the designs and technical demands of others. Professional aptitude and appearance at all times. Strives for continuous improvement for the benefit of the company. Driven to achieve customer satisfaction. Able to work under pressure, and accept honest feedback on one's work Be able to work effectively in a team Good level of communication skills, with the necessity to liaise with internal staff and external bodies Willing to work extra to meet deadlines as and when the business needs require it Desirable - Further education, i.e. MCIAT/MCIOB CSCS card qualification Use of Viewpoint drawing management system. Management of technical fees and services cost to complete. Continued professional development and keeping up to date with changes within the industry. More about the Technical Coordinator role Negotiate effectively with a wide range of organisations, statutory bodies and interest groups to achieve the desired design outcomes. Communicate effectively with all relevant departments in writing, verbally and in presentation format to provide accurate and timely information. Establish and maintain strong and respected working relationships with internal departments, local authorities and companies throughout the region. Undertake key aspects of the Principal Designer role as defined within the Construction Design & Management Regulation 2015. Completion of all necessary Health, Safety & Environmental documents, in line with group policy. Co-ordinate consultants or when required be able to personally produce house type working drawings and liaise with key suppliers to provide ancillary information for tender, construction and sales packs. Be conversant with current building regulations, procedures, construction methods, materials costs and general market conditions in relation to Company products Undertaking value engineering assessments and ensure buildability. Submission of all information to NHBC and obtaining approval of same, obtaining SAP Assessments together with PEA' and EPC's and Robust Standard Details. Attend regional sites to resolve technical and construction related problems. Detail and monitor acceptable solutions to resolve. Attending and chairing Pre-Start Meetings and briefing all departments on matters related to superstructures. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with group procedures. Co-ordinate the accuracy of information supplied by all departments to ensure no discrepancies. Provide information for Housing Association contracts and attendance of progress meetings, Attend departmental meetings as required. Ensure all relevant stakeholders are informed of key departmental developments. Ensure you have read the Company's health and safety policies and procedures observe them at all times. Reporting any accidents or near misses immediately to your Manager and record them in the accident book. Ensure your workplace is kept tidy and any hazards are eliminated or reported to your line manager. Always wear appropriate protective clothing on site. Attend all health and safety training as required by the Company Coach and support team members as required. Finally, let's tell you a bit more about us At Vistry Group, we build more than homes. We develop sustainable communities across all sectors of the UK housing market through our leading housing brands Bovis Homes, Linden Homes and Countryside Homes. Delivered through Vistry Housebuilding, Countryside Partnerships and Vistry Works with the support of Vistry Services, our values of integrity, caring, and quality continue to shape all we do. We're proud that our UK Green Building Council membership, 2021 Large Housebuilder of the Year award and status as a UK top-five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating allows us to transform land into thriving spaces. We're also proud that our culture sees everyon
Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Electrical, Control & Instrumentation Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Electrical, Control & Instrumentation Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical, Control & Instrumentation Engineer: - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineer - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations - Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical, Control & Instrumentation Engineer: - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Apr 29, 2024
Full time
Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 We have partnered with an organisation who specialises in digital transformations and operational technology who have been ahead of the game with their advanced systems for years. The business who are going from strength to strength, are looking to hire a Electrical, Control & Instrumentation Engineer to be part of the business's world class team ahead of their expanding project opportunities. The Electrical, Control & Instrumentation Engineer will be primary based in the office in Stafford and will be designing hardware systems using various hardware components for a key focus on MCCs, PLCs, Switchgear and Drives & Controls. Essential requirements for the Electrical, Control & Instrumentation Engineer: - Strong understanding of designing electrical panels containing PLC's and LV distribution systems. - Design of containment systems and electrical cabling - Proven experience of AutoCAD Electrical, Microsoft office products. - Working with production to see the design through to completion. - Mentoring experience with junior engineer - Understanding of IEC BS EN 61439-1,Low-voltage switchgear and control gear assemblies - Ability to develop technical solutions to meet customer and project expectations - Working knowledge of BS7671 IEE 18th Edition Wiring Regulations Benefits of the Electrical, Control & Instrumentation Engineer: - 25 days holiday plus bank holidays Tailored pension planning scheme - Life assurance policy and private health care - Support in achieving professional engineer status (IEng, CEng) and professional memberships fees covered. Electrical, Control & Instrumentation Engineer - Staffordshire - Up to £65,000 To discuss this exciting opportunity in more detail, please APPLY NOW for a no obligation chat with your VIQU Consultant. Additionally, you can contact Dan Freeman , by exploring the VIQU IT Recruitment website . If you know someone who would be ideal for this role, by way of showing our appreciation, VIQU is offering an introduction fee up to £1,000 once your referral has successfully started work with our client (terms apply).
Job Title: Senior Geotechnical Design Engineer About My Client: My client is an award-winning ground engineering consultancy renowned for delivering innovative and sustainable solutions across various sectors. With a commitment to excellence and continuous development, they provide a dynamic and supportive environment for their team members to thrive. Job Description: My client is seeking a highly skilled and experienced Geotechnical Design Engineer to join their team at their Harrogate office. The ideal candidate will possess a blend of technical expertise, practical experience, and a proactive approach to problem-solving. Key Responsibilities: Develop ground models and determine geotechnical parameters. Design various geotechnical structures including piles, foundations, retaining walls, ground anchors, soil nails, and reinforced soil slopes and walls. Conduct ground movement assessments and settlement analysis. Collaborate effectively with multidisciplinary teams and clients to deliver successful projects. Act as a mentor to junior engineers and provide technical support as needed. Skills and Experience: Strong understanding of soil mechanics and soil/structure interaction Use of software tools such as Oasys Pile, Alp, PDisp, Adsec, ADC, Rocscience Slide, WALLAP, AutoCAD, and Excel. Some experience in the use of Plaxis 3D or other FE software would be desirable. Good knowledge of Eurocodes and British Standards (such as: BS EN 1990, BS EN 1991, BS EN 1992, BS EN 1997, BS8002, BS8004, BS8006, BS8081). Good knowledge of relevant CIRIA guides. Thorough understanding of ground investigation techniques and experience in specifying geotechnical testing (in-situ and laboratory) while interpreting results accurately. A self-starter attitude, conducting independent reading and research with guidance from the Technical Director. Excellent analytical skills and a curious, inquisitive mind-set. Requirements: BSc in Civil Engineering or Geology. MSc in Geotechnical Engineering. Extensive design experience. Ability to work independently and as part of a team. Located or willing to relocate to the Harrogate area. Benefits: Competitive salary package commensurate with experience. Opportunities for career advancement and professional development. Comprehensive training provided with a route to Chartership if needed. Vibrant and inclusive work culture fostering innovation and collaboration.
Apr 29, 2024
Full time
Job Title: Senior Geotechnical Design Engineer About My Client: My client is an award-winning ground engineering consultancy renowned for delivering innovative and sustainable solutions across various sectors. With a commitment to excellence and continuous development, they provide a dynamic and supportive environment for their team members to thrive. Job Description: My client is seeking a highly skilled and experienced Geotechnical Design Engineer to join their team at their Harrogate office. The ideal candidate will possess a blend of technical expertise, practical experience, and a proactive approach to problem-solving. Key Responsibilities: Develop ground models and determine geotechnical parameters. Design various geotechnical structures including piles, foundations, retaining walls, ground anchors, soil nails, and reinforced soil slopes and walls. Conduct ground movement assessments and settlement analysis. Collaborate effectively with multidisciplinary teams and clients to deliver successful projects. Act as a mentor to junior engineers and provide technical support as needed. Skills and Experience: Strong understanding of soil mechanics and soil/structure interaction Use of software tools such as Oasys Pile, Alp, PDisp, Adsec, ADC, Rocscience Slide, WALLAP, AutoCAD, and Excel. Some experience in the use of Plaxis 3D or other FE software would be desirable. Good knowledge of Eurocodes and British Standards (such as: BS EN 1990, BS EN 1991, BS EN 1992, BS EN 1997, BS8002, BS8004, BS8006, BS8081). Good knowledge of relevant CIRIA guides. Thorough understanding of ground investigation techniques and experience in specifying geotechnical testing (in-situ and laboratory) while interpreting results accurately. A self-starter attitude, conducting independent reading and research with guidance from the Technical Director. Excellent analytical skills and a curious, inquisitive mind-set. Requirements: BSc in Civil Engineering or Geology. MSc in Geotechnical Engineering. Extensive design experience. Ability to work independently and as part of a team. Located or willing to relocate to the Harrogate area. Benefits: Competitive salary package commensurate with experience. Opportunities for career advancement and professional development. Comprehensive training provided with a route to Chartership if needed. Vibrant and inclusive work culture fostering innovation and collaboration.
A BMS project is the design, engineering, manufacture, installation, commissioning and completion of a new BEMS installation. A BMS project manager is the person who manages the above process from start to finish making sure the project is delivered on time and budget in the most cost effective way possible. The project manager is an important senior and well respected role which is a selfmanaged role with back-up from other staff. A project manager plans their own workload in line with the requirements of each project keeping the projects director informed of their plans at all times. Responsibilities A project manager's role includes but is not be limited to the following responsibilities. The organisation and planning of the entire works from start to finish. The production of technical submissions and description of operations. The reading and interpretation of project specifications and schematics. The production and engineering of panel manufacture notes and points lists. The efficient selection of parts and equipment in order to deliver the project. The procurement of parts and services. The instruction and supervision of additional trades or other personnel. Liaising with the in house CAD, applications and commissioning engineers. Carrying out regular site visits and attending meetings when required. Attributes A service project engineer has the following attributes Self-managing & motivating Can work alone and un-supervised in most situations. An in-depth knowledge of BEMS controls and applications. Good communication skills A logical approach Can read schematic drawings Can identify applications in existing plant
Apr 29, 2024
Full time
A BMS project is the design, engineering, manufacture, installation, commissioning and completion of a new BEMS installation. A BMS project manager is the person who manages the above process from start to finish making sure the project is delivered on time and budget in the most cost effective way possible. The project manager is an important senior and well respected role which is a selfmanaged role with back-up from other staff. A project manager plans their own workload in line with the requirements of each project keeping the projects director informed of their plans at all times. Responsibilities A project manager's role includes but is not be limited to the following responsibilities. The organisation and planning of the entire works from start to finish. The production of technical submissions and description of operations. The reading and interpretation of project specifications and schematics. The production and engineering of panel manufacture notes and points lists. The efficient selection of parts and equipment in order to deliver the project. The procurement of parts and services. The instruction and supervision of additional trades or other personnel. Liaising with the in house CAD, applications and commissioning engineers. Carrying out regular site visits and attending meetings when required. Attributes A service project engineer has the following attributes Self-managing & motivating Can work alone and un-supervised in most situations. An in-depth knowledge of BEMS controls and applications. Good communication skills A logical approach Can read schematic drawings Can identify applications in existing plant
Vacancy No 5124 Vacancy Title Specification Consultant - Paving & Landscaping Products- Midlands Vacancy Description Are you interested in joining an established supplier of construction and landscaping products? With a history that spans over six decades, our client has grown into one of the UK's most renowned designers, manufacturers, and distributors of building products for the commercial and domestic markets. This is a unique opportunity to join a company whose products are held in high regard at an exciting stage in their development in the UK construction sector. Our client is seeking a dynamic individual to join their Specification team because of an increase in demand for their products. If you have experience working with Architects, Landscape Architects, Engineers, and Local Authorities and have the professionalism and the expertise to secure project specifications, this role is for you. Key Responsibilities of the role Target Architects, Landscape Architects, Engineers & Local Authorities to assist in the specification process. Confidently conduct CPD presentations to groups of up to 30 Architects. With the support of the sales support team, you will be expected to attend a set number of meetings per week and a minimum of 48 CPDs per year. Develop a comprehensive knowledge of all the company's products and their applications. Promote company business by effective contact with specifiers and generally raise awareness of the company. Actively seek new customers and sell the technical capabilities of the company and its products. Establish new sales opportunities through industry networking and interrogation of CRM. Ensure all sales leads are passed on to the sales team in a format that enables them to close a deal. Market the company's products to specifiers, engineers, and developers by issuing corporate sales literature, and by personal contact. Provide existing customers with a high level of service. Be aware of competition, and competitor's products and prices. Maintain schedules as instructed by management to facilitate cold calling, timely introductions and to follow up initial contacts. Provide monthly reports on trends and sales performance. To manage all customer contact information through use of the CRM system. To attend construction sites and train or advise customers about safe and correct use of products and where failures or defects occur to resolve the issue in conjunction with the sales team, product managers and other technical staff. Co-operation with management and other sales staff to ensure the efficient running of the business. Knowledge, Skills and Experience Required Ability to confidently conduct one to one meeting in a professional environment. Excellent presentation skills Excellent communication and problem-solving skills Ability to recognise commercial opportunities and develop new business. Technically competent Previous experience in a specification role involving hard landscaping or building product specification. This role offers the successful Candidate numerous opportunities for career progression along with continuous training and development. Location/Area Midlands Region Salary Excellent Salary Package + High OTE Package Company Car or Car Allowance Company Rewards Scheme, Career Development Opportunities, Pension, 25 Days Holiday
Apr 29, 2024
Full time
Vacancy No 5124 Vacancy Title Specification Consultant - Paving & Landscaping Products- Midlands Vacancy Description Are you interested in joining an established supplier of construction and landscaping products? With a history that spans over six decades, our client has grown into one of the UK's most renowned designers, manufacturers, and distributors of building products for the commercial and domestic markets. This is a unique opportunity to join a company whose products are held in high regard at an exciting stage in their development in the UK construction sector. Our client is seeking a dynamic individual to join their Specification team because of an increase in demand for their products. If you have experience working with Architects, Landscape Architects, Engineers, and Local Authorities and have the professionalism and the expertise to secure project specifications, this role is for you. Key Responsibilities of the role Target Architects, Landscape Architects, Engineers & Local Authorities to assist in the specification process. Confidently conduct CPD presentations to groups of up to 30 Architects. With the support of the sales support team, you will be expected to attend a set number of meetings per week and a minimum of 48 CPDs per year. Develop a comprehensive knowledge of all the company's products and their applications. Promote company business by effective contact with specifiers and generally raise awareness of the company. Actively seek new customers and sell the technical capabilities of the company and its products. Establish new sales opportunities through industry networking and interrogation of CRM. Ensure all sales leads are passed on to the sales team in a format that enables them to close a deal. Market the company's products to specifiers, engineers, and developers by issuing corporate sales literature, and by personal contact. Provide existing customers with a high level of service. Be aware of competition, and competitor's products and prices. Maintain schedules as instructed by management to facilitate cold calling, timely introductions and to follow up initial contacts. Provide monthly reports on trends and sales performance. To manage all customer contact information through use of the CRM system. To attend construction sites and train or advise customers about safe and correct use of products and where failures or defects occur to resolve the issue in conjunction with the sales team, product managers and other technical staff. Co-operation with management and other sales staff to ensure the efficient running of the business. Knowledge, Skills and Experience Required Ability to confidently conduct one to one meeting in a professional environment. Excellent presentation skills Excellent communication and problem-solving skills Ability to recognise commercial opportunities and develop new business. Technically competent Previous experience in a specification role involving hard landscaping or building product specification. This role offers the successful Candidate numerous opportunities for career progression along with continuous training and development. Location/Area Midlands Region Salary Excellent Salary Package + High OTE Package Company Car or Car Allowance Company Rewards Scheme, Career Development Opportunities, Pension, 25 Days Holiday
Our client is a £300M turnover main contractor who specialise in new build schemes in the construction industry. Operating out of their Birmingham office, they are looking to hire a Design Manager who will play a pivotal role in the design and development of student accommodation schemes in the Bristol area.As a Design Manager, your role will include the following: Collaborate with other stakeholders including architects, subcontractors, consultants, and engineers from the outset. Establish and promote best practice in health, safety, sustainability, cost, time, buildability, and relevant quality matters. Promote use of engineering expertise and advice to add value to the process of design development. Prepare and maintain design commissioning for commercial and delivery purposes. Embed within existing design team effectively. Integrate with the fast-paced dynamic set to maintain key design milestones and deliverables. Keep management informed of design activity and progress achieved throughout. Ensuring compliance with CDM requirements for internal and external designers. Apply technical and build knowledge to design conceptualization and delivery processes.Candidate requirements Practical experience of working on similar projects at Design Manager level. E.g. new build hotel, student accommodation, high-rise and multi-room schemes. Knowledge of design standards and procedures Experience using AutoCAD and 4Projects software to a high-standard. Ideally based in the Bristol region. Degree-educated in Architecture or Engineering The RolePosition: Design ManagerOffice: BirminghamProject: Bristol City CentreType: Full Time Permanent Salary: starting from £70,000-£80,000 plus competitive benefits package.If you'd like to apply please submit an updated CV.Time Recruitment Solutions Ltd is acting as an Employment Agency in relation to this vacancy.
Apr 29, 2024
Full time
Our client is a £300M turnover main contractor who specialise in new build schemes in the construction industry. Operating out of their Birmingham office, they are looking to hire a Design Manager who will play a pivotal role in the design and development of student accommodation schemes in the Bristol area.As a Design Manager, your role will include the following: Collaborate with other stakeholders including architects, subcontractors, consultants, and engineers from the outset. Establish and promote best practice in health, safety, sustainability, cost, time, buildability, and relevant quality matters. Promote use of engineering expertise and advice to add value to the process of design development. Prepare and maintain design commissioning for commercial and delivery purposes. Embed within existing design team effectively. Integrate with the fast-paced dynamic set to maintain key design milestones and deliverables. Keep management informed of design activity and progress achieved throughout. Ensuring compliance with CDM requirements for internal and external designers. Apply technical and build knowledge to design conceptualization and delivery processes.Candidate requirements Practical experience of working on similar projects at Design Manager level. E.g. new build hotel, student accommodation, high-rise and multi-room schemes. Knowledge of design standards and procedures Experience using AutoCAD and 4Projects software to a high-standard. Ideally based in the Bristol region. Degree-educated in Architecture or Engineering The RolePosition: Design ManagerOffice: BirminghamProject: Bristol City CentreType: Full Time Permanent Salary: starting from £70,000-£80,000 plus competitive benefits package.If you'd like to apply please submit an updated CV.Time Recruitment Solutions Ltd is acting as an Employment Agency in relation to this vacancy.
Vacancy No 5125 Vacancy Title Specification Consultant - Paving & Landscaping Products- North West Vacancy Description Are you interested in joining an established supplier of construction and landscaping products? With a history that spans over six decades, our client has grown into one of the UK's most renowned designers, manufacturers, and distributors of building products for the commercial and domestic markets. This is a unique opportunity to join a company whose products are held in high regard at an exciting stage in their development in the UK construction sector. Our client is seeking a dynamic individual to join their Specification team because of an increase in demand for their products. If you have experience working with Architects, Landscape Architects, Engineers, and Local Authorities and have the professionalism and the expertise to secure project specifications, this role is for you. Key Responsibilities of the role Target Architects, Landscape Architects, Engineers & Local Authorities to assist in the specification process. Confidently conduct CPD presentations to groups of up to 30 Architects. With the support of the sales support team, you will be expected to attend a set number of meetings per week and a minimum of 48 CPDs per year. Develop a comprehensive knowledge of all the company's products and their applications. Promote company business by effective contact with specifiers and generally raise awareness of the company. Actively seek new customers and sell the technical capabilities of the company and its products. Establish new sales opportunities through industry networking and interrogation of CRM. Ensure all sales leads are passed on to the sales team in a format that enables them to close a deal. Market the company's products to specifiers, engineers, and developers by issuing corporate sales literature, and by personal contact. Provide existing customers with a high level of service. Be aware of competition, and competitor's products and prices. Maintain schedules as instructed by management to facilitate cold calling, timely introductions and to follow up initial contacts. Provide monthly reports on trends and sales performance. To manage all customer contact information through use of the CRM system. To attend construction sites and train or advise customers about safe and correct use of products and where failures or defects occur to resolve the issue in conjunction with the sales team, product managers and other technical staff. Co-operation with management and other sales staff to ensure the efficient running of the business. Knowledge, Skills and Experience Required Ability to confidently conduct one to one meeting in a professional environment. Excellent presentation skills Excellent communication and problem-solving skills Ability to recognise commercial opportunities and develop new business. Technically competent Previous experience in a specification role involving hard landscaping or building product specification. This role offers the successful Candidate numerous opportunities for career progression along with continuous training and development. Location/Area North West Salary Excellent Salary Package + High OTE Package Company Car or Car Allowance Company Rewards Scheme, Career Development Opportunities, Pension, 25 Days Holiday
Apr 29, 2024
Full time
Vacancy No 5125 Vacancy Title Specification Consultant - Paving & Landscaping Products- North West Vacancy Description Are you interested in joining an established supplier of construction and landscaping products? With a history that spans over six decades, our client has grown into one of the UK's most renowned designers, manufacturers, and distributors of building products for the commercial and domestic markets. This is a unique opportunity to join a company whose products are held in high regard at an exciting stage in their development in the UK construction sector. Our client is seeking a dynamic individual to join their Specification team because of an increase in demand for their products. If you have experience working with Architects, Landscape Architects, Engineers, and Local Authorities and have the professionalism and the expertise to secure project specifications, this role is for you. Key Responsibilities of the role Target Architects, Landscape Architects, Engineers & Local Authorities to assist in the specification process. Confidently conduct CPD presentations to groups of up to 30 Architects. With the support of the sales support team, you will be expected to attend a set number of meetings per week and a minimum of 48 CPDs per year. Develop a comprehensive knowledge of all the company's products and their applications. Promote company business by effective contact with specifiers and generally raise awareness of the company. Actively seek new customers and sell the technical capabilities of the company and its products. Establish new sales opportunities through industry networking and interrogation of CRM. Ensure all sales leads are passed on to the sales team in a format that enables them to close a deal. Market the company's products to specifiers, engineers, and developers by issuing corporate sales literature, and by personal contact. Provide existing customers with a high level of service. Be aware of competition, and competitor's products and prices. Maintain schedules as instructed by management to facilitate cold calling, timely introductions and to follow up initial contacts. Provide monthly reports on trends and sales performance. To manage all customer contact information through use of the CRM system. To attend construction sites and train or advise customers about safe and correct use of products and where failures or defects occur to resolve the issue in conjunction with the sales team, product managers and other technical staff. Co-operation with management and other sales staff to ensure the efficient running of the business. Knowledge, Skills and Experience Required Ability to confidently conduct one to one meeting in a professional environment. Excellent presentation skills Excellent communication and problem-solving skills Ability to recognise commercial opportunities and develop new business. Technically competent Previous experience in a specification role involving hard landscaping or building product specification. This role offers the successful Candidate numerous opportunities for career progression along with continuous training and development. Location/Area North West Salary Excellent Salary Package + High OTE Package Company Car or Car Allowance Company Rewards Scheme, Career Development Opportunities, Pension, 25 Days Holiday