The Health and Safety Partnership Limited
City, Manchester
CDM Principal Designer / Construction Safety Consultant required to join an established architectural practice. The role combines design-phase health and safety leadership with on-site advisory responsibilities, supporting projects from early planning through to construction. You will act as Principal Designer under the CDM Regulations 2015 while also attending construction sites to monitor compliance, provide guidance and promote a strong health and safety culture. This is a regional role primarily servicing clients across the North West. Key Responsibilities of CDM Principal Designer / Construction Safety Consultant Undertake the statutory duties of Principal Designer in accordance with CDM 2015 Plan, manage and monitor the pre-construction phase, ensuring risks are identified and controlled through design Advise clients on their legal duties and support them in meeting CDM requirements Prepare, review and coordinate Pre-Construction Information Liaise closely with design teams to eliminate or reduce foreseeable risks Carry out regular site visits to monitor health and safety standards and CDM compliance Provide practical health and safety advice to contractors and site teams Identify unsafe practices and support the implementation of corrective actions Review Construction Phase Plans and other key documentation Assist in the preparation and handover of Health and Safety Files Promote best practice and continuous improvement in health and safety performance Experience Demonstrable experience as a CDM Principal Designer and/or Construction Safety Consultant Background in construction, architecture, engineering, or a related discipline Confident conducting site inspections and engaging with contractors Proactive, organised and able to manage multiple projects Qualifications Relevant professional membership (e.g. APS, IOSH, CIOB) desirable. NEBOSH Construction Certificate or equivalent preferred as a minimum with further relevant qualification beneficial. This CDM Principal Designer / Construction Safety Consultant role is paying 50,000- 60,000 plus pension.
23/09/2026
Full time
CDM Principal Designer / Construction Safety Consultant required to join an established architectural practice. The role combines design-phase health and safety leadership with on-site advisory responsibilities, supporting projects from early planning through to construction. You will act as Principal Designer under the CDM Regulations 2015 while also attending construction sites to monitor compliance, provide guidance and promote a strong health and safety culture. This is a regional role primarily servicing clients across the North West. Key Responsibilities of CDM Principal Designer / Construction Safety Consultant Undertake the statutory duties of Principal Designer in accordance with CDM 2015 Plan, manage and monitor the pre-construction phase, ensuring risks are identified and controlled through design Advise clients on their legal duties and support them in meeting CDM requirements Prepare, review and coordinate Pre-Construction Information Liaise closely with design teams to eliminate or reduce foreseeable risks Carry out regular site visits to monitor health and safety standards and CDM compliance Provide practical health and safety advice to contractors and site teams Identify unsafe practices and support the implementation of corrective actions Review Construction Phase Plans and other key documentation Assist in the preparation and handover of Health and Safety Files Promote best practice and continuous improvement in health and safety performance Experience Demonstrable experience as a CDM Principal Designer and/or Construction Safety Consultant Background in construction, architecture, engineering, or a related discipline Confident conducting site inspections and engaging with contractors Proactive, organised and able to manage multiple projects Qualifications Relevant professional membership (e.g. APS, IOSH, CIOB) desirable. NEBOSH Construction Certificate or equivalent preferred as a minimum with further relevant qualification beneficial. This CDM Principal Designer / Construction Safety Consultant role is paying 50,000- 60,000 plus pension.
An established, multidisciplinary construction consultancy is looking to appoint an experienced CDM Principal Designer to join its London team. This is an excellent opportunity for a confident, capable professional who can hit the ground running and become a key member of a growing team. The successful candidate will work across a diverse portfolio of high-profile projects, including residential, commercial, healthcare and infrastructure schemes throughout London, with values ranging from £500k to £500m+. Initially this is an office-based role to encourage collaboration with the architectural and design teams, moving to one day per week working from home. The Role Deliver both Principal Designer and Client CDM Advisor services. Provide practical CDM and health & safety advice from project inception through to completion. Collaborate closely with architects, design teams and clients to ensure effective design risk management. Attend design team meetings and contribute to the successful delivery of complex projects. Build strong client relationships while maintaining high technical standards and helping to secure new work. Mentor and develop CDM professionals. Experience Several years experience delivering the Principal Designer and Client CDM Advisor services. Previous construction or design background (e.g. Architect, Engineer or Construction Management- preferred) Strong client-facing, communication and business development skills. Excellent Knowledge of the CDM Regulations 2015. Qualifications A relevant degree is preferred. Working towards or already holding CMaPS, CMIOSH, or an equivalent professional qualification. What's on Offer Salary of £60,000 £80,000, depending on experience. Comprehensive benefits package. Structured support towards CMaPS, CMIOSH or other relevant professional qualifications. Clear progression to Director level within a successful consultancy with a flat management structure, supported by excellent training and professional development. Exposure to landmark London projects across multiple sectors.
23/09/2026
Full time
An established, multidisciplinary construction consultancy is looking to appoint an experienced CDM Principal Designer to join its London team. This is an excellent opportunity for a confident, capable professional who can hit the ground running and become a key member of a growing team. The successful candidate will work across a diverse portfolio of high-profile projects, including residential, commercial, healthcare and infrastructure schemes throughout London, with values ranging from £500k to £500m+. Initially this is an office-based role to encourage collaboration with the architectural and design teams, moving to one day per week working from home. The Role Deliver both Principal Designer and Client CDM Advisor services. Provide practical CDM and health & safety advice from project inception through to completion. Collaborate closely with architects, design teams and clients to ensure effective design risk management. Attend design team meetings and contribute to the successful delivery of complex projects. Build strong client relationships while maintaining high technical standards and helping to secure new work. Mentor and develop CDM professionals. Experience Several years experience delivering the Principal Designer and Client CDM Advisor services. Previous construction or design background (e.g. Architect, Engineer or Construction Management- preferred) Strong client-facing, communication and business development skills. Excellent Knowledge of the CDM Regulations 2015. Qualifications A relevant degree is preferred. Working towards or already holding CMaPS, CMIOSH, or an equivalent professional qualification. What's on Offer Salary of £60,000 £80,000, depending on experience. Comprehensive benefits package. Structured support towards CMaPS, CMIOSH or other relevant professional qualifications. Clear progression to Director level within a successful consultancy with a flat management structure, supported by excellent training and professional development. Exposure to landmark London projects across multiple sectors.
Health & Safety Advisor Location: National travel with regular visits to projects across the Southern Region and periodic travel to Manchester. We're recruiting on behalf of a leading UK design and build contractor with over 30 years' experience delivering high-quality workplaces and commercial projects across the UK. Due to continued growth, they're looking to appoint an experienced Health & Safety Advisor to support and drive their Health & Safety strategy across a national portfolio of projects. This is a fantastic opportunity to join a respected and forward-thinking organisation where you'll have the opportunity to influence Health & Safety standards, work closely with senior stakeholders and project teams, and play a key role in embedding a proactive and positive safety culture across the business. What's on offer Competitive salary Company pension scheme Life assurance Critical illness cover Range of wellbeing services, including EAP, bereavement support and 24-hour GP service Cycle to work scheme Electric car leasing scheme Generous holiday allowance, plus 2 additional volunteer days The ideal candidate You'll be an experienced Health & Safety professional with a strong background in the construction sector, ideally within fit-out. You'll be confident working with project teams, subcontractors, clients and senior stakeholders, with the communication skills and resilience to influence positive change across the business. You'll also have: NEBOSH Certificate (essential) Strong working knowledge of CDM Regulations and their practical application Experience advising on safe access systems, including tube and fit and mobile tower scaffolding Knowledge of asbestos management and lifting operations, including mobile crane planning Up-to-date knowledge of Health & Safety legislation and industry best practice Strong written and verbal communication skills, with the ability to produce high-quality reports Excellent planning and organisational skills, with the ability to manage competing priorities A collaborative, relationship-led approach to driving behavioural and cultural change Full UK Driving Licence and flexibility to travel nationally The role The Health & Safety Advisor will play a key role in supporting the company's Health & Safety strategy and maintaining high standards across its national portfolio of projects. You'll carry out regular site audits, develop and review risk assessments, review Construction Phase Plans and compliance documentation, and advise project teams and subcontractors on RAMS and safe systems of work. You'll also support the design team with CDM compliance and design risk management, provide Health & Safety advice to clients and pre-contract teams, assist with behavioural safety initiatives, investigate accidents and incidents, produce reports and statistics, and support ISO audits and liaison with enforcing authorities where required. This is an excellent opportunity for an experienced Health & Safety professional looking to take on a varied and influential role within an established design and build business. With exposure to projects, clients, senior leadership and multiple areas of the Health & Safety function, you'll have the opportunity to make a genuine impact while continuing to develop your professional expertise. V7 Recruitment is an equal opportunities employer and does not discriminate on the grounds of age, disability, gender, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. All applications will be considered solely on merit and suitability for the role. Please note that by applying for this position you are giving consent for V7 Recruitment to process and store your personal data in line with our Privacy Policy. We may contact you about this and other suitable opportunities. You can request your data to be removed at any time by contacting us.
23/09/2026
Full time
Health & Safety Advisor Location: National travel with regular visits to projects across the Southern Region and periodic travel to Manchester. We're recruiting on behalf of a leading UK design and build contractor with over 30 years' experience delivering high-quality workplaces and commercial projects across the UK. Due to continued growth, they're looking to appoint an experienced Health & Safety Advisor to support and drive their Health & Safety strategy across a national portfolio of projects. This is a fantastic opportunity to join a respected and forward-thinking organisation where you'll have the opportunity to influence Health & Safety standards, work closely with senior stakeholders and project teams, and play a key role in embedding a proactive and positive safety culture across the business. What's on offer Competitive salary Company pension scheme Life assurance Critical illness cover Range of wellbeing services, including EAP, bereavement support and 24-hour GP service Cycle to work scheme Electric car leasing scheme Generous holiday allowance, plus 2 additional volunteer days The ideal candidate You'll be an experienced Health & Safety professional with a strong background in the construction sector, ideally within fit-out. You'll be confident working with project teams, subcontractors, clients and senior stakeholders, with the communication skills and resilience to influence positive change across the business. You'll also have: NEBOSH Certificate (essential) Strong working knowledge of CDM Regulations and their practical application Experience advising on safe access systems, including tube and fit and mobile tower scaffolding Knowledge of asbestos management and lifting operations, including mobile crane planning Up-to-date knowledge of Health & Safety legislation and industry best practice Strong written and verbal communication skills, with the ability to produce high-quality reports Excellent planning and organisational skills, with the ability to manage competing priorities A collaborative, relationship-led approach to driving behavioural and cultural change Full UK Driving Licence and flexibility to travel nationally The role The Health & Safety Advisor will play a key role in supporting the company's Health & Safety strategy and maintaining high standards across its national portfolio of projects. You'll carry out regular site audits, develop and review risk assessments, review Construction Phase Plans and compliance documentation, and advise project teams and subcontractors on RAMS and safe systems of work. You'll also support the design team with CDM compliance and design risk management, provide Health & Safety advice to clients and pre-contract teams, assist with behavioural safety initiatives, investigate accidents and incidents, produce reports and statistics, and support ISO audits and liaison with enforcing authorities where required. This is an excellent opportunity for an experienced Health & Safety professional looking to take on a varied and influential role within an established design and build business. With exposure to projects, clients, senior leadership and multiple areas of the Health & Safety function, you'll have the opportunity to make a genuine impact while continuing to develop your professional expertise. V7 Recruitment is an equal opportunities employer and does not discriminate on the grounds of age, disability, gender, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. All applications will be considered solely on merit and suitability for the role. Please note that by applying for this position you are giving consent for V7 Recruitment to process and store your personal data in line with our Privacy Policy. We may contact you about this and other suitable opportunities. You can request your data to be removed at any time by contacting us.
We are looking for an experienced Health & Safety Advisor to join a growing and successful Construction Business. This is an excellent opportunity to become part of a dynamic team supporting a wide range of construction, infrastructure, residential, commercial, and industrial projects. Working closely with operational teams, project managers, and clients, you will play a key role in promoting a positive health and safety culture, ensuring compliance with legislation, and helping deliver projects safely and efficiently. Key Responsibilities Provide proactive health and safety support across multiple construction projects and operational sites. Conduct regular site inspections, audits, and safety reviews to ensure compliance with health and safety legislation and company procedures. Assist in the development, review, and implementation of Risk Assessments, Method Statements (RAMS), and safe systems of work. Investigate accidents, incidents, near misses, and unsafe conditions, producing detailed reports and recommendations. Deliver health and safety inductions, toolbox talks, and training sessions to site personnel and management teams. Support project teams in identifying hazards and implementing effective control measures. Ensure compliance with relevant legislation including the Health and Safety at Work Act, CDM Regulations, and other applicable regulations. Monitor contractor and subcontractor compliance with company health and safety standards. Maintain accurate health and safety records, reports, and documentation. Promote continuous improvement initiatives and contribute to the development of a positive safety culture throughout the business. Liaise with clients, regulatory bodies, and external stakeholders on health and safety matters when required. Support the business in achieving and maintaining accreditations such as ISO 45001, CHAS, Constructionline, and SafeContractor. Requirements Previous experience in a Health & Safety Advisor, Health & Safety Coordinator, or similar role within the construction, civil engineering, infrastructure, or industrial sectors. Strong knowledge of UK health and safety legislation and industry best practices. Experience carrying out site inspections, audits, accident investigations, and compliance monitoring. Ability to prepare and review Risk Assessments, Method Statements, and health and safety documentation. Excellent communication and interpersonal skills, with the ability to engage effectively at all levels of an organisation. Strong organisational skills and attention to detail. NEBOSH General Certificate or NEBOSH Construction Certificate essential. Membership of IOSH (Working Towards, Technical, or Certified Member level) desirable. Full UK Driving Licence and willingness to travel to sites as required. Experience working within residential, commercial, infrastructure, or civil engineering projects would be advantageous. What's on Offer Competitive salary and benefits package. Clear career progression opportunities within a growing business. Exposure to a diverse portfolio of high-profile construction projects. Ongoing training, professional development, and support towards further qualifications. Collaborative and supportive working environment. Opportunity to play a key role in influencing and improving safety performance across the business.
21/09/2026
Full time
We are looking for an experienced Health & Safety Advisor to join a growing and successful Construction Business. This is an excellent opportunity to become part of a dynamic team supporting a wide range of construction, infrastructure, residential, commercial, and industrial projects. Working closely with operational teams, project managers, and clients, you will play a key role in promoting a positive health and safety culture, ensuring compliance with legislation, and helping deliver projects safely and efficiently. Key Responsibilities Provide proactive health and safety support across multiple construction projects and operational sites. Conduct regular site inspections, audits, and safety reviews to ensure compliance with health and safety legislation and company procedures. Assist in the development, review, and implementation of Risk Assessments, Method Statements (RAMS), and safe systems of work. Investigate accidents, incidents, near misses, and unsafe conditions, producing detailed reports and recommendations. Deliver health and safety inductions, toolbox talks, and training sessions to site personnel and management teams. Support project teams in identifying hazards and implementing effective control measures. Ensure compliance with relevant legislation including the Health and Safety at Work Act, CDM Regulations, and other applicable regulations. Monitor contractor and subcontractor compliance with company health and safety standards. Maintain accurate health and safety records, reports, and documentation. Promote continuous improvement initiatives and contribute to the development of a positive safety culture throughout the business. Liaise with clients, regulatory bodies, and external stakeholders on health and safety matters when required. Support the business in achieving and maintaining accreditations such as ISO 45001, CHAS, Constructionline, and SafeContractor. Requirements Previous experience in a Health & Safety Advisor, Health & Safety Coordinator, or similar role within the construction, civil engineering, infrastructure, or industrial sectors. Strong knowledge of UK health and safety legislation and industry best practices. Experience carrying out site inspections, audits, accident investigations, and compliance monitoring. Ability to prepare and review Risk Assessments, Method Statements, and health and safety documentation. Excellent communication and interpersonal skills, with the ability to engage effectively at all levels of an organisation. Strong organisational skills and attention to detail. NEBOSH General Certificate or NEBOSH Construction Certificate essential. Membership of IOSH (Working Towards, Technical, or Certified Member level) desirable. Full UK Driving Licence and willingness to travel to sites as required. Experience working within residential, commercial, infrastructure, or civil engineering projects would be advantageous. What's on Offer Competitive salary and benefits package. Clear career progression opportunities within a growing business. Exposure to a diverse portfolio of high-profile construction projects. Ongoing training, professional development, and support towards further qualifications. Collaborative and supportive working environment. Opportunity to play a key role in influencing and improving safety performance across the business.
Principal Engineer Bridgend, South Wales Competitive Salary + Car Allowance + Benefits Join one of the UK's leading and fastest-growing civil engineering contractors. We're recruiting for a Principal Engineer to join a highly successful contractor delivering major infrastructure, water, energy, environmental and civil engineering projects across the UK. This is an exceptional opportunity for an experienced engineer to take a strategic technical leadership role, influencing projects from feasibility and tender stage through to delivery and completion. Ideal for candidates currently working within a civil engineering consultancy, contractor or multidisciplinary engineering environment who are looking to take ownership of project strategy, technical excellence and engineering innovation on major infrastructure schemes. The Role As Principal Engineer, you will lead engineering input across a diverse portfolio of civil engineering projects, providing technical leadership throughout pre-construction, design development, tendering and project delivery phases. Acting as a key technical authority within the business, you will support clients, delivery teams and stakeholders by developing buildable, innovative and commercially successful engineering solutions. Key Responsibilities Lead engineering input from feasibility and concept design through to project delivery. Provide technical leadership during tender and bid submissions. Develop construction methodologies, engineering strategies and sequencing plans. Undertake buildability reviews, value engineering exercises and technical risk assessments. Drive engineering excellence across pre-construction and project delivery teams. Develop and review temporary and permanent works solutions. Support planning, programming and construction methodology development. Act as a technical advisor to clients, consultants, operational teams and stakeholders. Champion sustainable engineering solutions and modern methods of construction. Support compliance with CDM Regulations and Principal Designer duties where required. Capture lessons learned and promote continuous improvement throughout the business. Mentor and develop engineers, helping build technical capability across the organisation. Represent the business during technical reviews, client presentations and stakeholder meetings. What We're Looking For -Significant experience within civil engineering, infrastructure, water, energy or environmental projects. -Strong understanding of engineering design, construction methodologies and project delivery. -Experience leading multidisciplinary engineering teams and managing technical workflows. -Proven ability to identify, manage and mitigate technical risk. -Strong commercial awareness and understanding of project constraints. -Excellent communication and stakeholder management skills. -Ability to translate complex technical issues into clear, practical and buildable solutions. Essential Qualifications Degree, HNC or HND in Civil Engineering, Construction Management or a related discipline. Chartered Engineer (CEng) status or actively working towards chartership. Full UK Driving Licence. Highly Desirable Water, utilities, energy or major infrastructure experience. Strong understanding of buildability reviews and value engineering. Temporary Works experience. CDM and Principal Designer experience. AutoCAD, Civil 3D, Revit or similar engineering software experience. Knowledge of flood risk, environmental permitting and sustainable drainage systems (SuDS). Experience supporting major framework agreements and infrastructure tenders. What's On Offer? -Competitive salary and benefits package. -Car allowance. -Pension scheme. -Ongoing professional development and chartership support. -Genuine career progression opportunities. -Long-term secured workload. -Opportunity to influence major infrastructure and civil engineering projects from concept through to completion. -Supportive and collaborative working environment. -The chance to play a key role in one of the UK's fastest-growing civil engineering contractors.
21/09/2026
Full time
Principal Engineer Bridgend, South Wales Competitive Salary + Car Allowance + Benefits Join one of the UK's leading and fastest-growing civil engineering contractors. We're recruiting for a Principal Engineer to join a highly successful contractor delivering major infrastructure, water, energy, environmental and civil engineering projects across the UK. This is an exceptional opportunity for an experienced engineer to take a strategic technical leadership role, influencing projects from feasibility and tender stage through to delivery and completion. Ideal for candidates currently working within a civil engineering consultancy, contractor or multidisciplinary engineering environment who are looking to take ownership of project strategy, technical excellence and engineering innovation on major infrastructure schemes. The Role As Principal Engineer, you will lead engineering input across a diverse portfolio of civil engineering projects, providing technical leadership throughout pre-construction, design development, tendering and project delivery phases. Acting as a key technical authority within the business, you will support clients, delivery teams and stakeholders by developing buildable, innovative and commercially successful engineering solutions. Key Responsibilities Lead engineering input from feasibility and concept design through to project delivery. Provide technical leadership during tender and bid submissions. Develop construction methodologies, engineering strategies and sequencing plans. Undertake buildability reviews, value engineering exercises and technical risk assessments. Drive engineering excellence across pre-construction and project delivery teams. Develop and review temporary and permanent works solutions. Support planning, programming and construction methodology development. Act as a technical advisor to clients, consultants, operational teams and stakeholders. Champion sustainable engineering solutions and modern methods of construction. Support compliance with CDM Regulations and Principal Designer duties where required. Capture lessons learned and promote continuous improvement throughout the business. Mentor and develop engineers, helping build technical capability across the organisation. Represent the business during technical reviews, client presentations and stakeholder meetings. What We're Looking For -Significant experience within civil engineering, infrastructure, water, energy or environmental projects. -Strong understanding of engineering design, construction methodologies and project delivery. -Experience leading multidisciplinary engineering teams and managing technical workflows. -Proven ability to identify, manage and mitigate technical risk. -Strong commercial awareness and understanding of project constraints. -Excellent communication and stakeholder management skills. -Ability to translate complex technical issues into clear, practical and buildable solutions. Essential Qualifications Degree, HNC or HND in Civil Engineering, Construction Management or a related discipline. Chartered Engineer (CEng) status or actively working towards chartership. Full UK Driving Licence. Highly Desirable Water, utilities, energy or major infrastructure experience. Strong understanding of buildability reviews and value engineering. Temporary Works experience. CDM and Principal Designer experience. AutoCAD, Civil 3D, Revit or similar engineering software experience. Knowledge of flood risk, environmental permitting and sustainable drainage systems (SuDS). Experience supporting major framework agreements and infrastructure tenders. What's On Offer? -Competitive salary and benefits package. -Car allowance. -Pension scheme. -Ongoing professional development and chartership support. -Genuine career progression opportunities. -Long-term secured workload. -Opportunity to influence major infrastructure and civil engineering projects from concept through to completion. -Supportive and collaborative working environment. -The chance to play a key role in one of the UK's fastest-growing civil engineering contractors.
Active Travel Project Manager Taunton Contract £21.65 per hour PAYE or £29.50 per hour limited paid via umbrella company inside IR35 Our client is looking for an experienced Active Travel Project Manager Typically one day in office, two remote. This can be reviewed as progress. The Active Travel Project Manager Role is a hybrid position with expectations of a day a week in Somerset Council's office at The Crescent in Taunton and the remaining days can be fulfilled remote working. This arrangement may change over time due to role demands and expectations. You will play a vital role in helping to drive the Council's dedicated Active Travel capital programme of over £9 million. Work with key national bodies such as Active Travel England to ensure schemes comply with funding and design requirements. Plus work with local stakeholders and colleagues to inform, promote and help deliver a diverse range of active travel and transport schemes including the wide range of overlapping disciplines this can involve such as planning, S106 contributions, maintenance, policy etc. This is one of many vacancies we are recruiting for please visit our website for more opportunities. Role Purpose Support the Service Manager and Principal Transport Planner to oversee the development and scheme preparation stages of new active travel schemes, through to the commencement of construction and handover to operational delivery. Manages projects as the scheme transitions into construction. Co-ordinates with the various stakeholders to agree robust proposals, appropriate engagement from all necessary parties, commissioning of necessary technical activity and securing of necessary approvals and consents. The focus of this role will be on the Active Travel Programme, but the successful candidate will be required to become involved in other team and interdisciplinary projects. Accountabilities Responsible for supporting the Service Manager - Transport Schemes Commissioning for all matters related to the commissioning of new major and minor transport infrastructure schemes to ensure swift progress is maintained through the life of the scheme. Commissioning Major Transport Infrastructure Schemes Oversee the development and scheme preparation stages of new schemes following the approval to commence a strategic outline business case, through to the commencement of construction and handover to operational delivery. Manage projects with the authority and responsibility to run the project on a day-to-day basis up until the appointment and involvement of an NEC project manager (contract manager) as the scheme transitions into construction. Co-ordinate activity working with the various stakeholders to agree robust proposals, appropriate engagement from all necessary parties, commissioning of necessary technical activity and securing of necessary approvals and consents. Ensure Client responsibilities are met under the Construction Design and Management (CDM) 2015 regulations. Responsibilities include: Initiate project inception and associated processes. o Establish appropriate governance (project and programme) and agree project roles and responsibilities. With the Programme Management Office, establish the project organisation and reinforce the roles, responsibilities and deliverables for each team member. Co-ordinate the activities of a multi-discipline project team which may consist of development, design, construction, commercial, planning, testing, and commissioning and support resources. Support the Service Manager in progressing business case development from the strategic outline business case stage through to full business case. Commission technical activity to support the scheme development and preparation, e.g. traffic modelling, highways design, legal and planning advice, land-acquisition and property, surveys, consultations, etc. Co-ordinate consultation and engagement processes. Develop and gain approval for procurement strategy in association with the project team. Obtain formal decisions to proceed at each business case stage or gateway under the Council s scheme of delegation. Support the Service Manager in gaining authority to seek planning consents and use of CPO powers if needed. Maintain and monitor progress to programme and budget through outline and detailed design. Ensure outcomes and outputs are delivered at each stage. Commission Early Contractor Involvement/ Buildability advice as necessary. Commission Minor Transport Scheme Programmes Act as commissioner to ensure that an agreed framework is in place to identify, prioritise and deliver a programme of minor transport improvement schemes and safety related improvements. Work with operations in an advisory capacity to ensure that appropriate processes are in place and that the criteria for scheme selection and prioritisation reflect the Council s overall policy priorities. This will cover a range of operational programmes. e.g. active travel schemes, elected member s small improvement schemes, local safety schemes, traffic signals recovery programme and any other relevant programmes. PLEASE VISIT OUR WEBSITE FOR MORE OPPORTUNITIES colbernlimited co uk The first part of our recruitment process is to send your CV. Should you be short listed Colbern Limited will contact you within 5 days or we may contact you about other job opportunities. Colbern Limited along with our clients are an equal opportunities employer
19/09/2026
Full time
Active Travel Project Manager Taunton Contract £21.65 per hour PAYE or £29.50 per hour limited paid via umbrella company inside IR35 Our client is looking for an experienced Active Travel Project Manager Typically one day in office, two remote. This can be reviewed as progress. The Active Travel Project Manager Role is a hybrid position with expectations of a day a week in Somerset Council's office at The Crescent in Taunton and the remaining days can be fulfilled remote working. This arrangement may change over time due to role demands and expectations. You will play a vital role in helping to drive the Council's dedicated Active Travel capital programme of over £9 million. Work with key national bodies such as Active Travel England to ensure schemes comply with funding and design requirements. Plus work with local stakeholders and colleagues to inform, promote and help deliver a diverse range of active travel and transport schemes including the wide range of overlapping disciplines this can involve such as planning, S106 contributions, maintenance, policy etc. This is one of many vacancies we are recruiting for please visit our website for more opportunities. Role Purpose Support the Service Manager and Principal Transport Planner to oversee the development and scheme preparation stages of new active travel schemes, through to the commencement of construction and handover to operational delivery. Manages projects as the scheme transitions into construction. Co-ordinates with the various stakeholders to agree robust proposals, appropriate engagement from all necessary parties, commissioning of necessary technical activity and securing of necessary approvals and consents. The focus of this role will be on the Active Travel Programme, but the successful candidate will be required to become involved in other team and interdisciplinary projects. Accountabilities Responsible for supporting the Service Manager - Transport Schemes Commissioning for all matters related to the commissioning of new major and minor transport infrastructure schemes to ensure swift progress is maintained through the life of the scheme. Commissioning Major Transport Infrastructure Schemes Oversee the development and scheme preparation stages of new schemes following the approval to commence a strategic outline business case, through to the commencement of construction and handover to operational delivery. Manage projects with the authority and responsibility to run the project on a day-to-day basis up until the appointment and involvement of an NEC project manager (contract manager) as the scheme transitions into construction. Co-ordinate activity working with the various stakeholders to agree robust proposals, appropriate engagement from all necessary parties, commissioning of necessary technical activity and securing of necessary approvals and consents. Ensure Client responsibilities are met under the Construction Design and Management (CDM) 2015 regulations. Responsibilities include: Initiate project inception and associated processes. o Establish appropriate governance (project and programme) and agree project roles and responsibilities. With the Programme Management Office, establish the project organisation and reinforce the roles, responsibilities and deliverables for each team member. Co-ordinate the activities of a multi-discipline project team which may consist of development, design, construction, commercial, planning, testing, and commissioning and support resources. Support the Service Manager in progressing business case development from the strategic outline business case stage through to full business case. Commission technical activity to support the scheme development and preparation, e.g. traffic modelling, highways design, legal and planning advice, land-acquisition and property, surveys, consultations, etc. Co-ordinate consultation and engagement processes. Develop and gain approval for procurement strategy in association with the project team. Obtain formal decisions to proceed at each business case stage or gateway under the Council s scheme of delegation. Support the Service Manager in gaining authority to seek planning consents and use of CPO powers if needed. Maintain and monitor progress to programme and budget through outline and detailed design. Ensure outcomes and outputs are delivered at each stage. Commission Early Contractor Involvement/ Buildability advice as necessary. Commission Minor Transport Scheme Programmes Act as commissioner to ensure that an agreed framework is in place to identify, prioritise and deliver a programme of minor transport improvement schemes and safety related improvements. Work with operations in an advisory capacity to ensure that appropriate processes are in place and that the criteria for scheme selection and prioritisation reflect the Council s overall policy priorities. This will cover a range of operational programmes. e.g. active travel schemes, elected member s small improvement schemes, local safety schemes, traffic signals recovery programme and any other relevant programmes. PLEASE VISIT OUR WEBSITE FOR MORE OPPORTUNITIES colbernlimited co uk The first part of our recruitment process is to send your CV. Should you be short listed Colbern Limited will contact you within 5 days or we may contact you about other job opportunities. Colbern Limited along with our clients are an equal opportunities employer
Are you an electrically biased Health & Safety professional? Do you hold practical expertise in CDM regulations? Are you based in or around Port Talbot? Project Invictus is transforming the future of UK Steel. The successful applicant will be a precision focused CDM specialist with a strong foundation in Electrical Engineering. Day to day focus will be playing a pivotal role in one of the UK's most significant industrial transformations, enforcing safety compliance and providing subject matter expertise on CDM regulations and Electrical regulation. Role: CDM Facilitator (Electrical) Location: TATA Steel, Port Talbot SA13 2NG (100% site based) Pay: 40,788 per annum, hourly this is 21.49ph Contract length: 36 months Shift Patterns: Monday - Thursday 08:30-16:45, Friday 08:30-15:45 (36.5 hours per week) Start: ASAP but pending the successful result of a medical assessment. This does involve a drug and alcohol test. Responsibilities: Supporting and advising the project teams in the co-ordination, implementation and development of safety systems and procedures Ensuring that adequate control measures are in place for the control of Contractors working for the Project & Design department Ensuring compliance with appropriate CDM and H&S legislation is maintained. Supporting the deployment of the Tata Health and Safety Management System and department goals with respect to the Safety Annual Plan. Identifying improvements in health, safety and environmental standards in the assigned area/Project construction site. Updating designated Safety Systems including Compliance Register and Audit Index. Auditing safety compliance with regards to behaviour and inspections. Liaising with the Central Safety/Specialist Safety Advisor to provide information and where appropriate specialist Health &; Safety knowledge. Developing issuing and recording safety bulletins, accident alerts, amber alerts, toolbox talks etc. Providing information for internal and external stakeholders such as auditors, JWHSAC, steering meetings etc. Delivering local area safety inductions and training packages as required by the local department/Project to ensure clear understanding of local safety rules to all persons (employees, contractors and visitors). Tracking and driving safety compliance training within the local area, e.g. HAVS, Fire, Asbestos, Gas Awareness. Essential requirements: Driving Licence and access to own vehicle (due to the nature of the site) NEBOSH General Certificate or NEBOSH Construction Certificate Electrical Engineering based qualification (NVQ3 and above) Good knowledge of Construction techniques and processes Proficient IT literacy, especially with Windows Office, SAP & Lotus notes database Experience in on site heavy industries, major construction or oil and gas works Benefits: 35 days paid holiday per annum (including Bank Holidays) Exclusive online services including restaurant and retail discounts Chance to receive 300 for referring a friend Advice and editing on your current CV Dedicated team throughout your journey within the role Opportunity to be part of additional self development courses Opportunity for progression into permanent roles Access to Employee Assistance Programme to support your personal wellbeing All applicants are subject to checks including but not limited to: Right to work check, Medical assessment, Drug and Alcohol Test and reference checks
18/09/2026
Contract
Are you an electrically biased Health & Safety professional? Do you hold practical expertise in CDM regulations? Are you based in or around Port Talbot? Project Invictus is transforming the future of UK Steel. The successful applicant will be a precision focused CDM specialist with a strong foundation in Electrical Engineering. Day to day focus will be playing a pivotal role in one of the UK's most significant industrial transformations, enforcing safety compliance and providing subject matter expertise on CDM regulations and Electrical regulation. Role: CDM Facilitator (Electrical) Location: TATA Steel, Port Talbot SA13 2NG (100% site based) Pay: 40,788 per annum, hourly this is 21.49ph Contract length: 36 months Shift Patterns: Monday - Thursday 08:30-16:45, Friday 08:30-15:45 (36.5 hours per week) Start: ASAP but pending the successful result of a medical assessment. This does involve a drug and alcohol test. Responsibilities: Supporting and advising the project teams in the co-ordination, implementation and development of safety systems and procedures Ensuring that adequate control measures are in place for the control of Contractors working for the Project & Design department Ensuring compliance with appropriate CDM and H&S legislation is maintained. Supporting the deployment of the Tata Health and Safety Management System and department goals with respect to the Safety Annual Plan. Identifying improvements in health, safety and environmental standards in the assigned area/Project construction site. Updating designated Safety Systems including Compliance Register and Audit Index. Auditing safety compliance with regards to behaviour and inspections. Liaising with the Central Safety/Specialist Safety Advisor to provide information and where appropriate specialist Health &; Safety knowledge. Developing issuing and recording safety bulletins, accident alerts, amber alerts, toolbox talks etc. Providing information for internal and external stakeholders such as auditors, JWHSAC, steering meetings etc. Delivering local area safety inductions and training packages as required by the local department/Project to ensure clear understanding of local safety rules to all persons (employees, contractors and visitors). Tracking and driving safety compliance training within the local area, e.g. HAVS, Fire, Asbestos, Gas Awareness. Essential requirements: Driving Licence and access to own vehicle (due to the nature of the site) NEBOSH General Certificate or NEBOSH Construction Certificate Electrical Engineering based qualification (NVQ3 and above) Good knowledge of Construction techniques and processes Proficient IT literacy, especially with Windows Office, SAP & Lotus notes database Experience in on site heavy industries, major construction or oil and gas works Benefits: 35 days paid holiday per annum (including Bank Holidays) Exclusive online services including restaurant and retail discounts Chance to receive 300 for referring a friend Advice and editing on your current CV Dedicated team throughout your journey within the role Opportunity to be part of additional self development courses Opportunity for progression into permanent roles Access to Employee Assistance Programme to support your personal wellbeing All applicants are subject to checks including but not limited to: Right to work check, Medical assessment, Drug and Alcohol Test and reference checks
CDM / Principal Designer Location London Salary 60,000 - 70,000 Employment Type Permanent Job Overview A CDM / Principal Designer opportunity with an architectural practice and specialist CDM team in London. The role suits a professional with CDM, Principal Designer or health and safety experience who can work alongside architects, designers and project leaders. You will deliver Principal Designer services, integrate health and safety throughout the design process and support projects across all RIBA workstages. Role & Responsibilities Deliver CDM Principal Designer services across projects Support implementation of CDM Regulations 2015 Provide Client Advisor support when required Identify and communicate design risks Prepare professional reports and CDM documentation You will collaborate with internal project teams and external stakeholders, providing technical guidance and helping teams consider practical responses to design risks. The position may also involve external representation and business development activity. Skills & Experience Required Experience in CDM, Principal Designer or health and safety Working knowledge of CDM Regulations 2015 Experience across all RIBA workstages Strong project management and organisational skills Clear communication and report-writing abilities You will need good attention to detail, technical competency and the ability to work effectively with architects, designers and wider project teams. A proactive and solutions-focused approach to design safety is required. Salary & Benefits 60,000 - 70,000 Hybrid working 23 days' holiday plus bank holidays Workplace pension with 4.5% employer contribution Mentorship, coaching and buddy support Benefits also include enhanced family leave, mental health support, permanent health insurance, professional and exam fee support, pension advice, season ticket loan, cycle to work scheme and staff wellbeing initiatives. About Hunter Dunning Hunter Dunning is a specialist property and built environment recruitment consultancy established in 2004, focused on quality and long-term partnerships in the UK and Ireland property and construction market. We specialise in full lifecycle property recruitment, covering architecture, interior design, surveying, land and planning, fire safety and wider construction roles. Apply Section If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. All applications are handled in strict confidence. Referral Section Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. See website for full terms & conditions.
18/09/2026
Full time
CDM / Principal Designer Location London Salary 60,000 - 70,000 Employment Type Permanent Job Overview A CDM / Principal Designer opportunity with an architectural practice and specialist CDM team in London. The role suits a professional with CDM, Principal Designer or health and safety experience who can work alongside architects, designers and project leaders. You will deliver Principal Designer services, integrate health and safety throughout the design process and support projects across all RIBA workstages. Role & Responsibilities Deliver CDM Principal Designer services across projects Support implementation of CDM Regulations 2015 Provide Client Advisor support when required Identify and communicate design risks Prepare professional reports and CDM documentation You will collaborate with internal project teams and external stakeholders, providing technical guidance and helping teams consider practical responses to design risks. The position may also involve external representation and business development activity. Skills & Experience Required Experience in CDM, Principal Designer or health and safety Working knowledge of CDM Regulations 2015 Experience across all RIBA workstages Strong project management and organisational skills Clear communication and report-writing abilities You will need good attention to detail, technical competency and the ability to work effectively with architects, designers and wider project teams. A proactive and solutions-focused approach to design safety is required. Salary & Benefits 60,000 - 70,000 Hybrid working 23 days' holiday plus bank holidays Workplace pension with 4.5% employer contribution Mentorship, coaching and buddy support Benefits also include enhanced family leave, mental health support, permanent health insurance, professional and exam fee support, pension advice, season ticket loan, cycle to work scheme and staff wellbeing initiatives. About Hunter Dunning Hunter Dunning is a specialist property and built environment recruitment consultancy established in 2004, focused on quality and long-term partnerships in the UK and Ireland property and construction market. We specialise in full lifecycle property recruitment, covering architecture, interior design, surveying, land and planning, fire safety and wider construction roles. Apply Section If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. All applications are handled in strict confidence. Referral Section Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. See website for full terms & conditions.
Health, Safety and Wellbeing Advisor - West Midlands (multi-site regional role) - £50k-£60k+car/car allowance and benefits - well established PC working on and providing health, safety and wellbeing support on varied construction (building) schemes including schools, universities, student accommodation, industrial building. Responsibilities & Duties will include: Act as a role model in the approach to all safety, health related matters, thereby supporting the business in developing the culture within the project teams. Participate and promote relevant Safety campaigns/initiatives. Carry out incident/accident investigation and H&S inspections/audits. Assist in the collection, monitoring and distribution of relevant Health & Safety information and accident statistics for internal and external reporting Assist in training relating to company and client Safety procedures and practices. Represent the company at H&S meetings and other events. Assist with the review of Risk Assessments and Method Statements for operations. Assist the project teams in reviewing sub-contractor Risk Assessments and Method Statement Ensure project compliance with CDM 2015 Assist with the H&S support of project PQQs and tendering activities It is essential that the jobholder is a focused self-starter with the enthusiasm, motivation and the initiative to succeed in this role. The jobholder must possess A sound working knowledge of all relevant health and safety legislation, regulations and guidance (and their impact on day-to-day operational activities), gained from a role within a construction environment. NEBOSH general/construction certificate IOSH Environmental training or equivalent Experience in compiling project H&S plans and documentation Strong IT Skills with the ability to utilise Microsoft office package. Evidence of good written and verbal communication skills, with the ability to influence others at both an operational and management level. A full clean driving license Desirable Experience in the the construction industry. Experience of interfacing with external customers to ensure our employees adhere to their safety procedures, policies, and work practices to the full satisfaction of the client company. A sound working knowledge in the application and monitoring of, ISO 45001, ISO 14001 and ISO 9001. HND / Degree in a relevant discipline and / or additional safety related qualifications or membership of relevant professional body.
16/09/2026
Full time
Health, Safety and Wellbeing Advisor - West Midlands (multi-site regional role) - £50k-£60k+car/car allowance and benefits - well established PC working on and providing health, safety and wellbeing support on varied construction (building) schemes including schools, universities, student accommodation, industrial building. Responsibilities & Duties will include: Act as a role model in the approach to all safety, health related matters, thereby supporting the business in developing the culture within the project teams. Participate and promote relevant Safety campaigns/initiatives. Carry out incident/accident investigation and H&S inspections/audits. Assist in the collection, monitoring and distribution of relevant Health & Safety information and accident statistics for internal and external reporting Assist in training relating to company and client Safety procedures and practices. Represent the company at H&S meetings and other events. Assist with the review of Risk Assessments and Method Statements for operations. Assist the project teams in reviewing sub-contractor Risk Assessments and Method Statement Ensure project compliance with CDM 2015 Assist with the H&S support of project PQQs and tendering activities It is essential that the jobholder is a focused self-starter with the enthusiasm, motivation and the initiative to succeed in this role. The jobholder must possess A sound working knowledge of all relevant health and safety legislation, regulations and guidance (and their impact on day-to-day operational activities), gained from a role within a construction environment. NEBOSH general/construction certificate IOSH Environmental training or equivalent Experience in compiling project H&S plans and documentation Strong IT Skills with the ability to utilise Microsoft office package. Evidence of good written and verbal communication skills, with the ability to influence others at both an operational and management level. A full clean driving license Desirable Experience in the the construction industry. Experience of interfacing with external customers to ensure our employees adhere to their safety procedures, policies, and work practices to the full satisfaction of the client company. A sound working knowledge in the application and monitoring of, ISO 45001, ISO 14001 and ISO 9001. HND / Degree in a relevant discipline and / or additional safety related qualifications or membership of relevant professional body.
Naughton Contracts Limited (NCL) Health & Safety Advisor Location: Hatfield, Hertfordshire - (with travel across UK projects) Competitive day rate (Contract) or salary (PAYE) available, depending on your preference Naughton Contracts Ltd is a young, ambitious civil engineering company delivering groundworks, earthworks, basements, site set-up and enabling, and civil engineering solutions across residential, commercial, and infrastructure projects. Including major data centre developments. We're looking for a Health & Safety Advisor to support our UK project sites, helping us maintain a strong, proactive safety culture across all our operations. About the Role As H&S Advisor, you'll provide on-the-ground health and safety support across our UK sites, working closely with site teams, subcontractors, and management to ensure safe systems of work are followed, risks are identified and controlled, and our high standards are maintained on every project. Key Responsibilities Conduct regular site inspections, audits, and risk assessments across groundworks, earthworks, basements, civil engineering, and site set-up/enabling projects. Monitor compliance with health and safety legislation, company policies, and industry standards. Support the delivery of site inductions, toolbox talks, and safety training. Investigate incidents, accidents, and near misses, and support the preparation of reports and corrective action plans. Review and advise on risk assessments, method statements (RAMs), and safe systems of work. Liaise with site managers, subcontractors, and clients to promote a positive safety culture and drive continuous improvement. Maintain accurate health and safety records and documentation in line with company management systems. Support the wider H&S team in preparing for audits and accreditations (e.g. ISO 45001). Escalate significant risks or non-conformances to the H&S Manager as required. Experience Experience working as an H&S Advisor within civil engineering, groundworks, or construction. Experience conducting site inspections, risk assessments, and incident investigations. Experience working across multiple sites and with varied subcontractor teams is an advantage. Familiarity with data centre, industrial, or infrastructure projects is beneficial. Knowledge Strong working knowledge of UK health & safety legislation, regulations, and industry standards (e.g. CDM Regulations). Understanding of civil engineering, groundworks, and construction methods and associated risks. Knowledge of risk assessment, method statement (RAMs), and safe systems of work processes. Awareness of incident reporting, root cause analysis, and corrective action planning. Qualifications NEBOSH General Certificate (or Construction Certificate) or equivalent. Membership or working towards membership of a professional safety body (e.g. IOSH) is highly beneficial. Valid CSCS card. Full UK driving licence (role involves travel between sites). Skills Strong communication and interpersonal skills, with the ability to influence and engage site teams at all levels. High attention to detail and a methodical, thorough approach to inspections and documentation. Confident delivering training, inductions, and toolbox talks to diverse audiences. Strong organisational skills, with the ability to manage multiple sites and priorities. Proactive, hands-on approach with sound judgement in identifying and managing risk. Competent in using digital tools for reporting, audits, and safety management systems. Ability to work independently while maintaining strong links with the wider H&S and project teams. Why Work for Us Join a young, ambitious, and fast-growing civil engineering company delivering complex projects across the UK and Europe. Be part of a business known for hitting deadlines, staying on budget, and delivering to the highest industry standards. Work on exciting, high-profile projects including advanced manufacturing and data centre developments. A professional, hands-on team environment where your contribution is valued and your development supported. Genuine opportunity to grow with the company as it establishes itself as a leading player in the industry. If you have the skills and experience to excel in this role, we would love to hear from you. Naughton Contracts is an Equal Opportunities employer and does not discriminate against any protected characteristic. Note for Recruitment Agencies: We are not using Recruitment Agencies for this role. In the event of speculative CV submissions, no fees will be applicable.
14/09/2026
Full time
Naughton Contracts Limited (NCL) Health & Safety Advisor Location: Hatfield, Hertfordshire - (with travel across UK projects) Competitive day rate (Contract) or salary (PAYE) available, depending on your preference Naughton Contracts Ltd is a young, ambitious civil engineering company delivering groundworks, earthworks, basements, site set-up and enabling, and civil engineering solutions across residential, commercial, and infrastructure projects. Including major data centre developments. We're looking for a Health & Safety Advisor to support our UK project sites, helping us maintain a strong, proactive safety culture across all our operations. About the Role As H&S Advisor, you'll provide on-the-ground health and safety support across our UK sites, working closely with site teams, subcontractors, and management to ensure safe systems of work are followed, risks are identified and controlled, and our high standards are maintained on every project. Key Responsibilities Conduct regular site inspections, audits, and risk assessments across groundworks, earthworks, basements, civil engineering, and site set-up/enabling projects. Monitor compliance with health and safety legislation, company policies, and industry standards. Support the delivery of site inductions, toolbox talks, and safety training. Investigate incidents, accidents, and near misses, and support the preparation of reports and corrective action plans. Review and advise on risk assessments, method statements (RAMs), and safe systems of work. Liaise with site managers, subcontractors, and clients to promote a positive safety culture and drive continuous improvement. Maintain accurate health and safety records and documentation in line with company management systems. Support the wider H&S team in preparing for audits and accreditations (e.g. ISO 45001). Escalate significant risks or non-conformances to the H&S Manager as required. Experience Experience working as an H&S Advisor within civil engineering, groundworks, or construction. Experience conducting site inspections, risk assessments, and incident investigations. Experience working across multiple sites and with varied subcontractor teams is an advantage. Familiarity with data centre, industrial, or infrastructure projects is beneficial. Knowledge Strong working knowledge of UK health & safety legislation, regulations, and industry standards (e.g. CDM Regulations). Understanding of civil engineering, groundworks, and construction methods and associated risks. Knowledge of risk assessment, method statement (RAMs), and safe systems of work processes. Awareness of incident reporting, root cause analysis, and corrective action planning. Qualifications NEBOSH General Certificate (or Construction Certificate) or equivalent. Membership or working towards membership of a professional safety body (e.g. IOSH) is highly beneficial. Valid CSCS card. Full UK driving licence (role involves travel between sites). Skills Strong communication and interpersonal skills, with the ability to influence and engage site teams at all levels. High attention to detail and a methodical, thorough approach to inspections and documentation. Confident delivering training, inductions, and toolbox talks to diverse audiences. Strong organisational skills, with the ability to manage multiple sites and priorities. Proactive, hands-on approach with sound judgement in identifying and managing risk. Competent in using digital tools for reporting, audits, and safety management systems. Ability to work independently while maintaining strong links with the wider H&S and project teams. Why Work for Us Join a young, ambitious, and fast-growing civil engineering company delivering complex projects across the UK and Europe. Be part of a business known for hitting deadlines, staying on budget, and delivering to the highest industry standards. Work on exciting, high-profile projects including advanced manufacturing and data centre developments. A professional, hands-on team environment where your contribution is valued and your development supported. Genuine opportunity to grow with the company as it establishes itself as a leading player in the industry. If you have the skills and experience to excel in this role, we would love to hear from you. Naughton Contracts is an Equal Opportunities employer and does not discriminate against any protected characteristic. Note for Recruitment Agencies: We are not using Recruitment Agencies for this role. In the event of speculative CV submissions, no fees will be applicable.
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
10/09/2026
Full time
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
10/09/2026
Full time
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
10/09/2026
Full time
Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2 3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You ll join an experienced consultancy where you ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What s in it for you? Salary of £55,000 £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2 3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation.
SHEQ Advisor - Yorkshire Water Framework Location: Yorkshire Duration: 6-12 months initial Rate: 42.10 per hour Hours: Mon-Fri, 45 hrs - site hours Role Summary: Contract SHEQ Advisor required to monitor Safety, Health, Environment, and Quality compliance, conduct audits, and enforce utility safety standards across Yorkshire Water capital delivery / metering / infrastructure framework. Immediate starter. Key Duties: Conduct daily site inspections & audits across clean/waste water sites, networks, treatment works Enforce YW & Water UK safety standards - Confined Space, Excavation, NRSWA, LOTOTO, Working at Height, SHEA Water Review and approve contractor RAMS, CPPs, Temporary Works, PermitsDeliver TBTs, safety briefings, site inductionsInvestigate incidents / near misses, produce reports with root cause & corrective actions (ICAM/5 Why) Ensure environmental compliance - pollution prevention, waste, discharge, carbonMaintain SHEQ data / KPIs, report to SHEQ Manager & YW client Close out audit actions, support ISO 45001 / 14001 / 9001 audits and external assessmentsCDM compliance checks - F10, client duties, contractor duties Requirements: NEBOSH General Certificate or Construction Certificate - Essential Tech IOSH or working towards Grad IOSHExperience as SHEQ Advisor in Water / Utilities / Construction - Yorkshire Water experience desirable Knowledge of UK H&S legislation, CDM Regulations, ISO management systems SHEA Water / EUSR - Highly desirableFull UK Driving Licence and own transport - travel to multiple sites CSCS card
10/09/2026
Contract
SHEQ Advisor - Yorkshire Water Framework Location: Yorkshire Duration: 6-12 months initial Rate: 42.10 per hour Hours: Mon-Fri, 45 hrs - site hours Role Summary: Contract SHEQ Advisor required to monitor Safety, Health, Environment, and Quality compliance, conduct audits, and enforce utility safety standards across Yorkshire Water capital delivery / metering / infrastructure framework. Immediate starter. Key Duties: Conduct daily site inspections & audits across clean/waste water sites, networks, treatment works Enforce YW & Water UK safety standards - Confined Space, Excavation, NRSWA, LOTOTO, Working at Height, SHEA Water Review and approve contractor RAMS, CPPs, Temporary Works, PermitsDeliver TBTs, safety briefings, site inductionsInvestigate incidents / near misses, produce reports with root cause & corrective actions (ICAM/5 Why) Ensure environmental compliance - pollution prevention, waste, discharge, carbonMaintain SHEQ data / KPIs, report to SHEQ Manager & YW client Close out audit actions, support ISO 45001 / 14001 / 9001 audits and external assessmentsCDM compliance checks - F10, client duties, contractor duties Requirements: NEBOSH General Certificate or Construction Certificate - Essential Tech IOSH or working towards Grad IOSHExperience as SHEQ Advisor in Water / Utilities / Construction - Yorkshire Water experience desirable Knowledge of UK H&S legislation, CDM Regulations, ISO management systems SHEA Water / EUSR - Highly desirableFull UK Driving Licence and own transport - travel to multiple sites CSCS card
Building Regulations Principal Designer / BRPD / PDBR Bedford / Hybrid £50,000 £80,000 DOE Building Safety Act / Building Regulations Are you an Architect, Architectural Technologist, Building Control Surveyor, Building Surveyor, Design Manager or experienced CDM Principal Designer with strong Building Regulations knowledge? This is a genuine opportunity to move into one of the fastest-growing specialist areas in construction compliance: Building Regulations Principal Designer work under the Building Safety Act. Our client is an established construction safety and building compliance consultancy based near Bedford. Due to growing client demand, they are looking for a Principal Designer to help develop and deliver their Building Regulations Principal Designer / BRPD service across commercial, retail and residential projects. This role would suit someone who understands design compliance, Building Regulations, technical design coordination or building control and wants to use that knowledge in a more specialist, client-facing consultancy role. The opportunity You will work with clients, designers, contractors and dutyholders to help ensure projects are planned, designed and documented in line with Building Regulations and the Building Safety Act. You do not need to have already held the exact title of Building Regulations Principal Designer. The client is open to strong candidates from architecture, architectural technology, building control, building surveying, design management, fire safety, engineering or CDM backgrounds, provided you have the right technical understanding and the confidence to advise clients and design teams. This is not a routine H&S advisor role. It is a technical design-compliance position with real scope to help shape a growing specialist service area. Key responsibilities As Building Regulations Principal Designer, you will: Act as, support or develop into the Principal Designer role under the Building Regulations dutyholder regime. Plan, manage, monitor and coordinate design work to help ensure Building Regulations compliance. Review design information and identify compliance risks, gaps or coordination issues. Support Building Control applications, Gateway submissions and related project documentation. Advise clients, designers and project teams on Building Safety Act and Building Regulations duties. Coordinate dutyholder information and help maintain clear compliance records. Support Golden Thread information, Fire and Emergency File requirements and mandatory occurrence reporting where applicable. Attend design team meetings and provide practical, solution-focused advice. Help develop internal processes, templates and best practice for BRPD / PDBR service delivery. Work across a varied project portfolio including commercial, retail and residential schemes. Candidate background The role could suit someone from one of the following backgrounds: Architect Architectural Technologist Architectural Technician Building Control Surveyor Registered Building Inspector Building Surveyor Design Manager Technical Manager Technical Coordinator Fire Safety Consultant with design-compliance exposure CDM Principal Designer with strong Building Regulations knowledge You will need Strong working knowledge of Building Regulations. Good understanding of the Building Safety Act and the strengthened dutyholder regime. Experience reviewing, coordinating or advising on design compliance. Confidence working with clients, designers, contractors and Building Control. Ability to identify practical compliance issues and communicate them clearly. A construction-related qualification or professional background. Strong written and verbal communication skills. Full UK driving licence. Useful but not essential Experience as a Building Regulations Principal Designer / BRPD / PDBR. Building Control or Registered Building Inspector background. Experience with Gateway 2 / Gateway 3 submissions. Knowledge of HRB and non-HRB project requirements. Membership or working towards RIBA, CIAT, CABE, RICS, APS, CIOB or similar. PAS 8671 awareness or competence-framework knowledge. Fire safety or design risk management experience. Why apply? This is a strong move for someone who wants to build a specialist career around Building Regulations, design compliance and the Building Safety Act. You will have the chance to: Move into a high-demand BRPD / PDBR specialism. Work with an established consultancy with an existing client base. Help shape and grow a specialist Building Regulations service. Apply your technical design or Building Control knowledge in a client-facing advisory role. Work across varied commercial, retail and residential projects. Receive support with professional development and relevant training. Join a business where your knowledge can make a visible impact. Package Salary: £60,000 £80,000 depending on experience. Hybrid working based from Bedford. Generous annual leave. Sick pay provision. Expenses support. Access to company schemes. Training and professional development support. Permanent position with long-term growth potential. Important note You do not need to tick every box. If you have strong Building Regulations, Building Control, architectural technology, building surveying, design management or technical compliance experience, and you are interested in moving into the Building Regulations Principal Designer / Building Safety Act space, this role is worth discussing. Apply now or contact People4U for a confidential conversation.
08/09/2026
Full time
Building Regulations Principal Designer / BRPD / PDBR Bedford / Hybrid £50,000 £80,000 DOE Building Safety Act / Building Regulations Are you an Architect, Architectural Technologist, Building Control Surveyor, Building Surveyor, Design Manager or experienced CDM Principal Designer with strong Building Regulations knowledge? This is a genuine opportunity to move into one of the fastest-growing specialist areas in construction compliance: Building Regulations Principal Designer work under the Building Safety Act. Our client is an established construction safety and building compliance consultancy based near Bedford. Due to growing client demand, they are looking for a Principal Designer to help develop and deliver their Building Regulations Principal Designer / BRPD service across commercial, retail and residential projects. This role would suit someone who understands design compliance, Building Regulations, technical design coordination or building control and wants to use that knowledge in a more specialist, client-facing consultancy role. The opportunity You will work with clients, designers, contractors and dutyholders to help ensure projects are planned, designed and documented in line with Building Regulations and the Building Safety Act. You do not need to have already held the exact title of Building Regulations Principal Designer. The client is open to strong candidates from architecture, architectural technology, building control, building surveying, design management, fire safety, engineering or CDM backgrounds, provided you have the right technical understanding and the confidence to advise clients and design teams. This is not a routine H&S advisor role. It is a technical design-compliance position with real scope to help shape a growing specialist service area. Key responsibilities As Building Regulations Principal Designer, you will: Act as, support or develop into the Principal Designer role under the Building Regulations dutyholder regime. Plan, manage, monitor and coordinate design work to help ensure Building Regulations compliance. Review design information and identify compliance risks, gaps or coordination issues. Support Building Control applications, Gateway submissions and related project documentation. Advise clients, designers and project teams on Building Safety Act and Building Regulations duties. Coordinate dutyholder information and help maintain clear compliance records. Support Golden Thread information, Fire and Emergency File requirements and mandatory occurrence reporting where applicable. Attend design team meetings and provide practical, solution-focused advice. Help develop internal processes, templates and best practice for BRPD / PDBR service delivery. Work across a varied project portfolio including commercial, retail and residential schemes. Candidate background The role could suit someone from one of the following backgrounds: Architect Architectural Technologist Architectural Technician Building Control Surveyor Registered Building Inspector Building Surveyor Design Manager Technical Manager Technical Coordinator Fire Safety Consultant with design-compliance exposure CDM Principal Designer with strong Building Regulations knowledge You will need Strong working knowledge of Building Regulations. Good understanding of the Building Safety Act and the strengthened dutyholder regime. Experience reviewing, coordinating or advising on design compliance. Confidence working with clients, designers, contractors and Building Control. Ability to identify practical compliance issues and communicate them clearly. A construction-related qualification or professional background. Strong written and verbal communication skills. Full UK driving licence. Useful but not essential Experience as a Building Regulations Principal Designer / BRPD / PDBR. Building Control or Registered Building Inspector background. Experience with Gateway 2 / Gateway 3 submissions. Knowledge of HRB and non-HRB project requirements. Membership or working towards RIBA, CIAT, CABE, RICS, APS, CIOB or similar. PAS 8671 awareness or competence-framework knowledge. Fire safety or design risk management experience. Why apply? This is a strong move for someone who wants to build a specialist career around Building Regulations, design compliance and the Building Safety Act. You will have the chance to: Move into a high-demand BRPD / PDBR specialism. Work with an established consultancy with an existing client base. Help shape and grow a specialist Building Regulations service. Apply your technical design or Building Control knowledge in a client-facing advisory role. Work across varied commercial, retail and residential projects. Receive support with professional development and relevant training. Join a business where your knowledge can make a visible impact. Package Salary: £60,000 £80,000 depending on experience. Hybrid working based from Bedford. Generous annual leave. Sick pay provision. Expenses support. Access to company schemes. Training and professional development support. Permanent position with long-term growth potential. Important note You do not need to tick every box. If you have strong Building Regulations, Building Control, architectural technology, building surveying, design management or technical compliance experience, and you are interested in moving into the Building Regulations Principal Designer / Building Safety Act space, this role is worth discussing. Apply now or contact People4U for a confidential conversation.
Building Regulation Principal Designer A multi-disciplinary who has traded for over 30 years are growing their Building Regulation Principal Design team; they are seeking an Architect with experience delivering the role. You will work on HRB and non-HRB projects across Residential, Commercial and Healthcare projects. They already have an established process for the management of Building Regulation management, which offers the Principal Designer the chance to work within an experienced team. They have an established Architecture service which will see the Building Regulation Principal Designer work with internal design teams and external clients in an advisory role. The Role Lead Building Regulations compliance through design coordination, risk-based reviews, multidisciplinary interfaces, regulatory submissions, change control, HRB Gateway and Golden Thread requirements, reporting, stakeholder collaboration, and continuous improvement of QA systems. The Person The Building Regulation Principal Designer suitable for this role will have at least 3 years of experience as a qualified Architect. The Building Regulation Principal Designer suitable for this role will have demonstratable experience of delivering the BRPD role. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 60,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for an Architect or Building Regulation Principal Designer in the London market currently. If you are a CDM Principal Designer and are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC18034 Principal Designer / Architect / Building Safety Act 2022 / RIBA / MCIAT / ARB / ACIAT / CIAT / Architectural Technologist / RIBA / BSA 2022 / Project Architect / Senior Architect / Architectural Associate / Building Regulation Principal Designer / BR PD / PD BR
08/09/2026
Full time
Building Regulation Principal Designer A multi-disciplinary who has traded for over 30 years are growing their Building Regulation Principal Design team; they are seeking an Architect with experience delivering the role. You will work on HRB and non-HRB projects across Residential, Commercial and Healthcare projects. They already have an established process for the management of Building Regulation management, which offers the Principal Designer the chance to work within an experienced team. They have an established Architecture service which will see the Building Regulation Principal Designer work with internal design teams and external clients in an advisory role. The Role Lead Building Regulations compliance through design coordination, risk-based reviews, multidisciplinary interfaces, regulatory submissions, change control, HRB Gateway and Golden Thread requirements, reporting, stakeholder collaboration, and continuous improvement of QA systems. The Person The Building Regulation Principal Designer suitable for this role will have at least 3 years of experience as a qualified Architect. The Building Regulation Principal Designer suitable for this role will have demonstratable experience of delivering the BRPD role. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 60,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for an Architect or Building Regulation Principal Designer in the London market currently. If you are a CDM Principal Designer and are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC18034 Principal Designer / Architect / Building Safety Act 2022 / RIBA / MCIAT / ARB / ACIAT / CIAT / Architectural Technologist / RIBA / BSA 2022 / Project Architect / Senior Architect / Architectural Associate / Building Regulation Principal Designer / BR PD / PD BR
Building Regulation Principal Designer A multi-disciplinary who has traded for over 30 years are growing their Building Regulation Principal Design team; they are seeking an Architect with experience delivering the role. You will work on HRB and non-HRB projects across Residential, Commercial and Healthcare projects. They already have an established process for the management of Building Regulation management, which offers the Principal Designer the chance to work within an experienced team. They have an established Architecture service which will see the Building Regulation Principal Designer work with internal design teams and external clients in an advisory role. The Role Lead Building Regulations compliance through design coordination, risk-based reviews, multidisciplinary interfaces, regulatory submissions, change control, HRB Gateway and Golden Thread requirements, reporting, stakeholder collaboration, and continuous improvement of QA systems. The Person The Building Regulation Principal Designer suitable for this role will have at least 3 years of experience as a qualified Architect. The Building Regulation Principal Designer suitable for this role will have demonstratable experience of delivering the BRPD role. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 60,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are a CDM Principal Designer and are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC18034 Principal Designer / Architect / Building Safety Act 2022 / RIBA / MCIAT / ARB / ACIAT / CIAT / Architectural Technologist / RIBA / BSA 2022 / Project Architect / Senior Architect / Architectural Associate / Building Regulation Principal Designer / BR PD / PD BR
08/09/2026
Full time
Building Regulation Principal Designer A multi-disciplinary who has traded for over 30 years are growing their Building Regulation Principal Design team; they are seeking an Architect with experience delivering the role. You will work on HRB and non-HRB projects across Residential, Commercial and Healthcare projects. They already have an established process for the management of Building Regulation management, which offers the Principal Designer the chance to work within an experienced team. They have an established Architecture service which will see the Building Regulation Principal Designer work with internal design teams and external clients in an advisory role. The Role Lead Building Regulations compliance through design coordination, risk-based reviews, multidisciplinary interfaces, regulatory submissions, change control, HRB Gateway and Golden Thread requirements, reporting, stakeholder collaboration, and continuous improvement of QA systems. The Person The Building Regulation Principal Designer suitable for this role will have at least 3 years of experience as a qualified Architect. The Building Regulation Principal Designer suitable for this role will have demonstratable experience of delivering the BRPD role. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 60,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are a CDM Principal Designer and are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC18034 Principal Designer / Architect / Building Safety Act 2022 / RIBA / MCIAT / ARB / ACIAT / CIAT / Architectural Technologist / RIBA / BSA 2022 / Project Architect / Senior Architect / Architectural Associate / Building Regulation Principal Designer / BR PD / PD BR
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
08/09/2026
Full time
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
08/09/2026
Full time
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
08/09/2026
Full time
CDM Principal Designer A flexible Compliance Consultancy are seeking a CDM Principal Designer due to growth. You will work be given full autonomy to organise your calendar to your way of working, whilst you work in a wider team of experienced CDM Principal Designers. The CDM Principal Designer will have access to large scale projects over a wide range of sectors, including new-build commercial, healthcare, complex residential and infrastructure. This offers the CDM Principal Designer the opportunity to expand their sector experience whilst work from a friendly consultancy remotely. The team meet up at least once a month, sometimes twice. The CDM Principal Designer role The successful CDM Principal Designer will mitigate risk within design stage, conduct site audits when required, collate Pre-Construction Information, review and compile Construction Phase Plans and manage the H&S file, whilst working towards handover to the Principal Contractor. The CDM Principal Designer The CDM Principal Designer suitable for this role will have at least 3 years of experience within a CDM Principal Designer / Advisor role. The CDM Principal Designer suitable for this role will have a NEBOSH Construction Certificate. The CDM Principal Designer suitable for this role will have a TechIOSH Membership. In Return? The salary is negotiable dependant on your ability and experience but as a guide: Up to 55,000 pa Bonus Pension Season ticket loan Health care Gym membership Corporate incentive scheme There really is not a more exciting role for a CDM Principal Designer in the London market currently. If you are considering your career options currently, please contact George Cassidy at Brandon James on (phone number removed). Ref: GC30956 CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / CertIOSH / CMIOSH / APS / IMaPS / CMaPS / CDM Consultant / CDM Advisor / Design Safety
