41 jobs found

Electrical Bias Shift Lead Engineer Location: Central London EC Postcode Salary: 52,000 - 56,000 (Qualification dependent) + OT Hours: Continental Days & Nights Role: Static, high end commercial site The Role: As the shift engineer on a 2x person shift team, you will be the go-to technical expert for all building services maintenance. This is a hands-on position, with approximately 80% of your time spent on the tools, ensuring the site runs smoothly and efficiently. Key Responsibilities: Carrying out all planned preventative maintenance (PPM) and reactive repairs across the site in line with SLAs. Performing electrical fault-finding and repairs on single and three-phase systems, distribution boards, control panels, and circuits. Conducting routine electrical maintenance, including emergency light testing, statutory checks, and replacements of lamps, ballasts, and other components. Managing and troubleshooting the building's power and lighting systems, and undertaking minor electrical installations such as replacing sockets, switches, and fused spurs. Providing expert fault-finding, diagnostics, and repair on a wide range of HVAC plant, including Air Handling Units (AHUs), Fan Coil Units (FCUs), VRV/VRF systems, splits, and ventilation. Managing general electrical and mechanical plant, including pumps, motors, and basic lighting and power systems. Undertaking minor fabric and plumbing repairs as required. Overseeing and managing specialist sub-contractors for services such as lifts and fire safety systems. Ensuring all work is completed to the highest standard and all site documentation is kept up to date. Essential Requirements: Proven experience in a commercial building services maintenance role. An electrical or mechanical engineering qualification (e.g., City & Guilds Level 3, 18th Edition, ). HVAP/LVAP Desirable Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

M&E Shift Engineer Canary Wharf Critical Datacentre Environment 55-58K + Paid Overtime Continental Shift Pattern (Days & Nights) We are currently recruiting for M&E Shift Engineer (Mechanical Shift Engineer / Electrical Shift Engineer) to carry out planned (PPM) and reactive maintenance duties across a highly critical datacentre environment based in Canary Wharf / Docklands, East London. As the M&E Shift Engineer (Mechanical Shift Engineer / Electrical Shift Engineer), you will be working as part of a large, multi skilled team. Employment Package: Role: M&E Shift Engineer (Mechanical Shift Engineer / Electrical Shift Engineer) Status: Permanent, PAYE Salary: 53,000 - 58,000 2,000 annual bonus + 3,000 HVAP allowance. Hours: Continental Shift Pattern: 3 days / 3 nights / 4 off / 4 days / 6 off / 4 nights / 4 off. Paid overtime available Full company employment benefits including paid holidays, private medical, private dental etc. Requirements: Must hold an electrical or mechanical based qualification, ie: City and Guilds Electrical Installation Level 2 / City and Guilds Electrical Installation Level 3 / City and Guilds 18th edition / NVQ Level 3 (2357) / City and Guilds Plumbing Level 2/3 / City and Guilds Air Conditioning Level 2 / F-Gas or equivalent / similar. Experience working in a maintenance position within commercial environments is advantageous but not essential. Experience working in a maintenance position within critical environments (datacentre, banking, hospitals, defence environments etc) or critical systems (UPS, high voltage switching, CRAC units) is highly advantageous but not essential. If you are a qualified and experience M&E Shift Engineer (Mechanical Shift Engineer / Electrical Shift Engineer) then please apply today by submitting a CV.

Lead Multiskilled Shift Engineer Sutton 47,800 + Package Shift pattern - Days - 4 on, 4 off - 7am - 7pm Brief Lead Multiskilled Shift Engineer needed for a large well known Facilities Management organisation based in Sutton who are looking to employ an experienced and well-rounded Lead Multiskilled Shift Engineer that takes pride in their work. The successful candidate must have their 18th Edition and also their 2391 testing and inspecting qualification. Benefits Salary: 45,000 - 47,800 per annum 24 day's holiday Gym membership discounts Cycle to work scheme Holiday purchase scheme Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Lead Multiskilled Shift Engineer will include: Supervise and monitor subcontractors on site, ensuring work is completed as agreed Complete planned preventative maintenance (PPM) and reactive tasks using PDA and Maintenance systems such as PlanOn Produce detailed shift reports and notify managers of any significant site developments Ensure safe working practices through preparation and use of Method Statements, Risk Assessments, and compliance with Health & Safety policies Maintain a professional image onsite, ensuring cleanliness and good working relationships Provide holiday and sickness cover, participate in out-of-hours standby rota, and flexible shift patterns Operate Permit to Work systems in line with organisation and client procedures What experience you need to be the successful Lead Multiskilled Shift Engineer: Recognised Mechanical or Electrical industry qualification Minimum 5 years' post-qualification experience in a similar role, ideally with building services M&E knowledge Competent in electrical inspection (2391), BSth Edition, and able to read electrical drawings Full clean driving licence Computer literate, a good communicator, self-motivated, and able to work both independently and within a team Flexible and adaptable with a professional and smart appearance Fluent in English, written and spoken Available to undertake out-of-hours standby rota This really is a fantastic opportunity for a Lead Multiskilled Shift Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Multiskilled Shift Engineer Sutton 45,700 + Package Shift pattern - Days - 4 on, 4 off - 7am - 7pm Brief Multiskilled Shift Engineer needed for a large well known Facilities Management organisation based in Sutton who are looking to employ an experienced and well-rounded Multiskilled Shift Engineer that takes pride in their work. The successful candidate must have their 18th Edition and ideally also their 2391 testing and inspecting qualification. Benefits Salary: 43,000 - 45,700 per annum 24 day's holiday Gym membership discounts Cycle to work scheme Holiday purchase scheme Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Multiskilled Shift Engineer will include: Ensure all planned preventive maintenance (PPM) is carried out timely and accurately using PDA and CAFM systems. Manage reactive and breakdown tasks proactively, reporting plant faults and issuing quotations as needed. Maintain safety compliance by conducting Point of Work Risk Assessments and operating within Permit to Work and SHEQ guidelines. Supervise subcontractors, maintain plant rooms to high standards, and participate in the call-out on-call rota with 12-hour shift work (4 on/4 off). What experience you need to be the successful Multiskilled Shift Engineer: A recognised industry-qualified Mechanical or Electrical Engineer, ideally level 3 qualified Experienced in electrical/mechanical building services maintenance with knowledge of th Edition and ideally 2361 inspection qualifications. Skilled in reading mechanical and electrical drawings and competent using CAFM systems. A strong communicator, self-motivated, able to work independently and as part of a team. Holds a full clean driver's licence and can maintain a professional appearance and demeanour. Fluent in English, available for out of hours standby rota, and flexible to work 12-hour shifts (4 on/4 off). This really is a fantastic opportunity for a Multiskilled Shift Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Senior Electrical - Multi skilled shift engineer I'm helping a major FM service provider find a senior electrical bias shift engineer on a large contract in East London. 52,000 + overtime + Scheduled pay rise Contintal days and nights Large, static site in East London Further training and progression Tasks: Lead a 2x person shift on a 40+ store commerical office space Planned Preventative Maintenance (PPM) Carry out scheduled maintenance of electrical and mechanical systems, including lighting, power distribution, and HVAC equipment. Ensure that all maintenance tasks are completed to high standards and in compliance with regulations. Fault Diagnosis and Repair Diagnose, troubleshoot, and repair electrical and mechanical faults on a variety of systems, including control panels, motors, pumps, and BMS. Respond promptly to breakdowns and emergencies, minimising downtime and ensuring equipment is back in service as quickly as possible. Electrical Installations and Upgrades Carry out electrical installations, modifications, and upgrades as required, adhering to relevant regulations and standards (BS7671). Qualifications: NVQ or City and Guilds Level 3 electrical installations 17th or 18th Edition Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Senior Mechanical Engineer £70,000 - £80,000 DOE Central London THE HOOK Your last three jobs blurred together. Same desk, same problems, incremental pay rises that barely kept pace with inflation. But what if the next move wasn't a lateral shift, what if it was into a business where you could actually see your impact, where technical expertise still counts, and where the person before you didn't leave because the culture was broken? Our client is hiring because they're growing, not because they're in trouble. WHAT THIS JOB IS You'd be a Senior Mechanical Engineer supporting the Technical Services team across Central London. The business is a principal contractor built on in-house expertise, they don't outsource their backbone. You'd work with a stable, long-standing client base and a pipeline full enough that you'll never run out of problems to solve. The company started over 40 years ago doing small moves and changes; they've grown into something substantial by genuinely understanding what clients need and delivering it consistently. That's not hype. That's decades of proof. SO WHAT? WHICH MEANS? You'd be joining a business where Safety, Quality, Integrity and People aren't slogans on a wall, they've survived decades of growth because they're how decisions get made. Which means your technical recommendations won't get buried in cost-cutting politics; they'll be heard. The progression prospects are real because there's no dead-end here. A business growing organically needs people who can grow with it, into team leadership, into strategic technical input, into genuine seniority. Which means if you've been waiting for a place where competence translates into opportunity, this is it. You'd have stable work. A stable operation with established clients and a full pipeline doesn't send people home on Fridays because the work dried up. Which means you can plan your career, not just your next month. The business is profitable, reputable, and built to last. Which means you're betting on something solid. THE REAL THING You'll be busy. The pipeline is strong, so you'll move between different projects. If you need downtime between commissions, this isn't the job. If you want constant momentum and variety, you'll find it here. THE BUSINESS Our client is a principal contractor serving major corporate and institutional clients across London. They employ in-house tradespeople, engineers, and technical teams, they've bet their reputation on quality and direct control, not subcontracting shortcuts. WHAT WE NEED Minimum 5 years' senior mechanical engineering experience. Chartered or on track to chartered status. Current knowledge of Building Regulations and relevant mechanical systems design. GET IN TOUCH Email Colleen Murray: (url removed) or call (phone number removed). No recruitment jargon, no hidden interview loops, just a conversation about whether this fits. She'll get back to you same day.

Carpenter / Joiner - Track Workshops (NIGHT SHIFT) Location: London Duration: 6-month contract Pay Rate: 50.34 per hour An exciting opportunity for an experienced Carpenter/Joiner to join a specialist workshop team supporting key infrastructure works on a major London transport network. The role involves the manufacture, repair, and installation of precision timber components for use across the network. Key Responsibilities: Manufacture, modify, and repair timber components to spec Install timber items on site when required Operate hand and power tools, wood machines, and workshop equipment Work from technical drawings and templates Drive workshop vehicles to and from work sites (if required) Maintain a clean, safe working environment Requirements: Apprenticeship or equivalent hands-on joinery experience Skilled in reading engineering drawings and producing timber assemblies Comfortable using machinery, overhead cranes, and mechanical handling tools Able to apply finishes and safely handle workshop solutions We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Design / Building Engineer (Industrial Projects) Day Shift Circa £55,000 + Bonus + Enhanced Benefits Location: Exeter We're looking to speak with engineers who have experience working with building layouts, CAD drawings and site development projects, ideally within an industrial or manufacturing environment. This is an opportunity to join a global engineering business supporting the redevelopment of a newly acquired site, helping shape it from early design stages through to a fully operational production facility. Rather than a purely contracts or senior project role, this position sits closer to the detail. You'll be reviewing layouts, working with external designers, and ensuring what's being designed actually works on site. You'll act as the link between drawings and delivery, supporting contractors, coordinating activity, and making sure designs are practical, safe and fit for purpose. What You'll Be Doing Supporting the redevelopment of an industrial site into a new production facility Working closely with architects and external design teams on building layouts and infrastructure Reviewing CAD drawings (AutoCAD or similar) and feeding back on practical site requirements Making minor amendments to layouts where needed and ensuring designs are workable on site Coordinating contractors during build and installation phases Supporting delivery across civil, mechanical and electrical works Acting as the point of contact between design teams and site operations Reviewing RAMS and ensuring works are carried out safely and in line with CDM regulations Supporting utilities integration including power, gas and HVAC systems Helping oversee installation of plant, equipment and supporting infrastructure Supporting the transition from build phase into an operational manufacturing facility What's In It for You Involvement in building a new production facility from the ground up Long-term progression into a site services / facilities engineering role Stable, well-invested business with strong long-term plans Exposure to large-scale site development and industrial projects Competitive salary, bonus and enhanced benefits package Day-based role with good work-life balance What We're Looking For Background as a Design Engineer, Building Engineer, Facilities Engineer or similar Experience working with CAD drawings (AutoCAD or similar), including reviewing and ideally making basic edits Experience supporting building, refurbishment or site development projects Comfortable working with external contractors, architects and design teams Understanding of building services such as electrical infrastructure, HVAC or utilities Ability to interpret technical drawings and translate them into practical site requirements Awareness of site safety, RAMS and CDM regulations Organised, hands-on approach with the ability to coordinate multiple activities Desirable Experience within industrial or manufacturing environmentsExposure to planning or building regulationsFamiliarity with project stages (RIBA or similar) Interested? This is a good fit for someone who enjoys the design and layout side of engineering but still wants to stay close to site and see projects delivered properly. If you want something a bit different from a standard maintenance role and like the idea of shaping a site from the ground up, it's worth a conversation.

Lead Engineer Liverpool Street, City of London £48,000 - £52,000 We've got a brilliant role for a Lead Engineer to join our client on a high end site based in Liverpool Street. You'll be joining a market leading company within building services, on a great site, as part of a well experienced team and be given opportunities to progress further within the organisation. As a Lead Engineer, you will oversee a small M&E maintenance team, allocate works, fault find / troubleshoot, provide technical support, carry out PPM and reactive maintenance on mechanical and electrical systems, and ensure the client is satisfied with the service provided. Lead Engineer Duties: PPMs & Reactive maintenance Statutory Compliance Single and Three Phase Power, Motors, Generators, Shutdowns, Switchgear, Motors, Emergency Lighting, Fire Alarm Test, AHUs, FCUs, VAVs, Sprinkler Systems, Pumps, Belts, BMS Operation Carry out isolation of plant and systems in accordance with safety requirements. Ensure corrective/repair works are carried out in accordance with regulations. Endorse safe working practices, quality standards conformity and best practice methods. Organising subcontractors Completing logbooks and RAMS Reports Permits to work Raise and close jobs on PDA's as necessary. Lead Engineer Requirements: City and Guilds / EAL / NVQ or equivalent in Electrical Installations / Engineering (Level 3 and regulations) or in a mechanical related subject (Level 2 minimum) At least 5 years experience as an Electrical Engineer within commercial building maintenance Strong M&E system experience Strong communication skills Ability to lead a team Salary and Package: £48,000 - £52,000 per annum 4 on / 4 off shift pattern, day shift only 20 days annual leave Company pension scheme Additional overtime On-going training Internal progression If you're interested in this Lead Engineer role, apply today!

Stride Recruitment are excited to present an excellent opportunity for experienced Maintenance Electrician to join our long-standing Building Service Provider Clients in Dartford, Kent (DAY & NIGHT SHIFT PATTERN) Main Purpose: The Shift Electrician will be required to carry out PPM and reactive maintenance breakdowns. checks to anything from changing light fittings to moving sockets, to completing fire alarm / emergency light testing and remedial work to full electrical shutdowns across the hospital. (Day & Night Shift) Main Accountabilities: To service and maintain building services plant and equipment in accordance with relevant standards, frequencies, and safe working practices. To respond to reactive breakdowns, carry out fault finding and any necessary repairs. Carry out scheduled planned preventative maintenance tasks. To have a can do approach to your work ethos. Be able to work within a small maintenance team, consisting of a mechanical shift engineer and a semi-skilled shift engineer (plus a full day team of engineering and support staff) What you will need for the role: Skills, Knowledge and Competencies required. Good all round technical ability and a working knowledge of a wide variety of electrical systems required, knowledge of building maintenance preferred, but not essential. Must be fully qualified in Electrical with experience of Commercial / Hospital buildings. Must be fully qualified electrician. City and Guilds. 2391 testing inspection. 18th Edition. Good communication skills, both written and oral. The ability to multi-task and be methodical. A pro-active approach to problem solving. Overtime available (shift covers and shut down work, as well as additional remedial works). Plenty of overtime available This is a Continental shift role 12 hours per day (Days & Nights). Temporary to Permanent or Long term contract.

Day Shift Engineer Liverpool Street, City of London £45,000 - £48,000 We have a brand new role for a Day Shift Engineer to join our client on a commercial space based in Liverpool Street! Our client is offering the successful candidate career progression and additional training, external training and AP status. This is a static role, that follows a 4 on / 4 off shift pattern, day shift only. As a Day Shift Engineer, you will carry out PPM and reactive maintenance on M&E systems, fault finding / troubleshooting, diagnose faults, respond to emergencies, update site logbooks and liaise with contractors. Day Shift Engineer Duties: PPM and Reactive Maintenance Electrical Fault-Finding, Single & Three Phase Power, Emergency Lighting, Fire Alarms, BMS Operation ,AHUs, FCUs, Generators, VAV/VRFs, Water Treatment (Tap Tests, Dosing, Cooling Tower Checks, etc)., Cooling Towers, Pumps & Motors Site Folders, E-logbooks, Managing Contractors, Audits, Quotations Communicate with the client Day Shift Engineer Requirements: City and Guilds / NVQ (Or equivalent) in electrical or mechanical engineering Apprentice trained (Desirable) Building service maintenance experience At least 3 years experience within commercial property maintenance Salary and Package: £45,000 - £48,000 per annum 4 on / 4 off shift pattern, day shift only Extra training + AP status 20 days annual leave Company pension scheme Internal progression Additional training Overtime available

Tunnelling Electrician - TBM (Herrenknecht) Location: North East England Rate: Up to 400 per shift Contract: Temporary to Permanent Shift Pattern: Rotating Days and Nights We are recruiting experienced Tunnelling Electricians to join a major infrastructure project in North East England, working on a Herrenknecht Tunnel Boring Machine (TBM). This position offers long-term project work with the opportunity to secure permanent employment following a successful temporary assignment. Role Overview As part of the TBM maintenance team, you will be responsible for maintaining the safe and efficient operation of tunnelling equipment through planned maintenance activities, fault diagnosis, and breakdown response. Key Responsibilities Carry out electrical maintenance and fault-finding on Herrenknecht TBMs and associated backup systems. Diagnose and repair faults on motors, drives, PLC-controlled equipment, conveyors, pumps, and ventilation systems. Undertake planned preventative maintenance to maximise machine availability and reliability. Support TBM assembly, commissioning, operation, and demobilisation activities. Read and interpret electrical drawings and schematics. Work closely with mechanical and production teams to minimise operational downtime. Ensure compliance with all site health, safety, and environmental requirements. Essential Requirements NVQ Level 3 Electrical Qualification or a recognised Electrical Apprenticeship. Proven experience in industrial electrical maintenance. Strong fault-finding and diagnostic skills within heavy industrial, construction, rail, mining, water, or manufacturing environments. Experience working with motors, drives, switchgear, and control systems. Ability to work rotating day and night shifts. Desirable Experience and Qualifications Previous tunnelling or TBM experience. Experience working with Herrenknecht machines. Knowledge of Siemens PLC systems. Valid CSCS or ECS card. Safety Critical Medical certification. Package Up to 400 per shift. Long-term infrastructure project. Temporary-to-permanent opportunity. Overtime available. Training and career development opportunities. Applicants with a strong industrial electrical maintenance background and experience in heavy engineering environments are encouraged to apply. Please call - (phone number removed) Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Tunnelling Electrician - TBM (Herrenknecht) Location: North East England Rate: Up to 400 per shift Contract: Temporary to Permanent Shift Pattern: Rotating Days and Nights We are recruiting experienced Tunnelling Electricians to join a major infrastructure project in North East England, working on a Herrenknecht Tunnel Boring Machine (TBM). This position offers long-term project work with the opportunity to secure permanent employment following a successful temporary assignment. Role Overview As part of the TBM maintenance team, you will be responsible for maintaining the safe and efficient operation of tunnelling equipment through planned maintenance activities, fault diagnosis, and breakdown response. Key Responsibilities Carry out electrical maintenance and fault-finding on Herrenknecht TBMs and associated backup systems. Diagnose and repair faults on motors, drives, PLC-controlled equipment, conveyors, pumps, and ventilation systems. Undertake planned preventative maintenance to maximise machine availability and reliability. Support TBM assembly, commissioning, operation, and demobilisation activities. Read and interpret electrical drawings and schematics. Work closely with mechanical and production teams to minimise operational downtime. Ensure compliance with all site health, safety, and environmental requirements. Essential Requirements NVQ Level 3 Electrical Qualification or a recognised Electrical Apprenticeship. Proven experience in industrial electrical maintenance. Strong fault-finding and diagnostic skills within heavy industrial, construction, rail, mining, water, or manufacturing environments. Experience working with motors, drives, switchgear, and control systems. Ability to work rotating day and night shifts. Desirable Experience and Qualifications Previous tunnelling or TBM experience. Experience working with Herrenknecht machines. Knowledge of Siemens PLC systems. Valid CSCS or ECS card. Safety Critical Medical certification. Package Up to 400 per shift. Long-term infrastructure project. Temporary-to-permanent opportunity. Overtime available. Training and career development opportunities. Applicants with a strong industrial electrical maintenance background and experience in heavy engineering environments are encouraged to apply. Please call - (phone number removed) Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

We are currently recruiting for a major logistics and distribution warehouse project in Kettering starting on Monday 15th June. This is a massive, fast-paced industrial development, and we require reliable CSCS Labourers to assist a specialist engineering team with the commissioning and testing of an advanced, large-scale conveyor system. The Role: This is not your standard sweeping-and-shifting labouring job. You will be directly integrated with the engineering team to ensure the conveyor systems are fully operational and safety-tested. Your duties will include: Assisting mechanical engineers with the physical testing, loading, and tracking of conveyor belts. Placing and monitoring test weights/packages on the system to check for faults, alignment, and speed. Identifying and reporting any blockages, unusual noises, or mechanical issues during the test phase. Ensuring the work area around the conveyor lines remains safe, clear of debris, and compliant with health and safety standards. General site lifting, shifting, and support duties as required by the site management team. Requirements: Valid CSCS Card (Essential) Previous experience working on large-scale warehouse or construction fit-out projects. Ability to follow strict technical instructions and safety protocols. Reliable and punctual. Full PPE (Hard hat, high-vis, steel toe boots). Please send your CV to Viki.

TXM Recruit are currently seeking skilled Mechanical Shift Engineers to join an established team at a site based in Oldham. In this role, you will be responsible for the rapid response to mechanical faults, as well as maintaining and optimising high-speed print production equipment. Salary: £45,000 £48,000 + 2% night shift allowance Working Pattern: 4-on, 4-off (2 days, 2 nights) Key Responsibilities Provide a rapid response to mechanical failures. Carry out structured maintenance schedules to ensure long-term machine reliability. Identify technical bottlenecks and develop SOPs to improve equipment performance. Accurately record all tasks and asset history using the CMMS system. Benefits 7 weeks holiday, plus additional days after 3, 5, and 10 years service, with the option to purchase extra leave. One paid volunteering day per year. Additional paid leave for key life events (e.g. getting married, moving house). Uniform and tools provided. Bonus scheme linked to company performance. Company pension with matched contributions up to 6%. Healthcare cash plan. Electric/hybrid car lease scheme via salary sacrifice. 24/7 wellbeing and employee assistance programme for you and your family. Access to a wide range of discounts. Interest-free loans (including season tickets and technology). Requirements Qualifications: Level 3 NVQ in Mechanical Engineering, or a time-served apprenticeship. Experience: Proven background within FMCG or high-volume manufacturing environments. Technical Skills: Strong fault-finding ability, preventative maintenance expertise, and structured problem-solving skills. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection or application process due to disability or a long-term health condition, we will do our best to assist you

Mechanical-Biased Multi-Skilled Engineer Location: London - Zone 1 Salary: 40,000 - 45,000 per annum (Depending on experience) Shift: Monday - Friday Standard Office Hours The Role Are you a precision-driven Engineer with a strong mechanical background and a "can-do" attitude toward building maintenance? We are seeking a Mechanical-Biased Multi-Skilled Engineer to join the onsite team at a high-end, flagship commercial head office in the heart of Zone 1. Key Responsibilities Mechanical Lead: Lead the PPM (Planned Preventative Maintenance) and reactive repairs on HVAC systems, pumps, motors, seals, pressurized systems, and AHUs/FCUs. Multi-Skilled Support: Assist with minor electrical tasks (lamp changes, ballast resets) and general building fabric repairs as required. System Monitoring: Regularly monitor BMS (Building Management Systems) to ensure optimal climate control and energy efficiency. Contractor Management: Oversee specialist sub-contractors, ensuring all work meets the high standards of the site and adheres to Health & Safety regulations. Compliance: Maintain accurate digital logs of all works completed, ensuring the site remains fully compliant with industry standards. What We're Looking For Qualifications: Level 2/3 City & Guilds/NVQ in Mechanical Engineering or Plumbing & Heating (or equivalent). Experience: Proven track record in a commercial office environment (preferably high-end or "Blue Chip" corporate spaces). Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Electrical - Multi skilled shift engineer I'm helping a major FM service provider find a shift engineer on a large contract in central London. 54,000 + overtime (flexible with experience) 4 on 4 off days and nights Large, static site Further training and progression Tasks: Planned Preventative Maintenance (PPM) Carry out scheduled maintenance of electrical and mechanical systems, including lighting, power distribution, and HVAC equipment. Ensure that all maintenance tasks are completed to high standards and in compliance with regulations. Fault Diagnosis and Repair Diagnose, troubleshoot, and repair electrical and mechanical faults on a variety of systems, including control panels, motors, pumps, and BMS. Respond promptly to breakdowns and emergencies, minimising downtime and ensuring equipment is back in service as quickly as possible. Electrical Installations and Upgrades Carry out electrical installations, modifications, and upgrades as required, adhering to relevant regulations and standards (BS7671). Qualifications: NVQ or City and Guilds Level 3 electrical installations 17th or 18th Edition Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Engineering Supervisor - High-End Corporate site Location: City of London Salary: 57,000 + overtime + bonus Hours: Monday - Friday: 08:00 - 17:00 The Opportunity We are seeking a high-calibre Engineering Supervisor to lead the technical service delivery for a prestigious, high-end commercial tenant contract in Central London. Our client is a global leader in real estate and facilities management, trusted by the world's most successful corporations. This role is based within a flagship, high-spec corporate headquarters, managing the critical engineering infrastructure exclusively for a premium blue-chip occupier. This is an exceptional "supervisor-level" opportunity designed for a senior engineer ready to step up, combining strong hands-on technical authority with team leadership, corporate client diplomacy, and compliance governance. The Role As the Engineering Supervisor, you will be the primary technical authority on the floor. You will balance the operational management of a dedicated shift or day engineering team with the high-touch, fast-paced service standards required by elite corporate tenants. Key Responsibilities: Technical Team & Operational Leadership Engineering Supervision: Coordinate, support, and mentor a team of multi-skilled engineers, overseeing daily Planned Preventative Maintenance (PPM) and high-volume reactive workloads via the CAFM system. Operational Uptime: Maintain 100% operational resilience across all critical tenant infrastructure, including critical cooling systems (UPS/Chillers), tenant power distribution, and localized HVAC/FCU plant. Subcontractor Governance: Supervise, induct, and audit specialist supply chain vendors, ensuring all works comply with site-specific technical standards and quality benchmarks. Compliance, HSE & Technical Governance Statutory Compliance: Take joint accountability for the asset's statutory compliance folders, ensuring all logbooks (Emergency Lighting, Water Hygiene/L8, Fire Safety) are kept in an immaculate, audit-ready condition. Safe Systems of Work (SSoW): Act as a key safety authority on-site, reviewing high-risk Risk Assessments and Method Statements (RAMS) and issuing Permits to Work. Incident Management: Lead technical investigations and root-cause analyses following any operational incidents or critical system trips, providing detailed technical reporting. Client Diplomacy & Account Growth Stakeholder Management: Build trusted relationships with the tenant's Facilities Managers and workplace teams, providing clear, professional updates and acting as the first point of escalation for technical issues. Commercial Support: Proactively identify system optimizations, energy-efficiency adjustments, and extra works opportunities, assisting the management team in preparing accurate quotes. What We Are Looking For The ideal candidate will combine elite technical mastery with the polished, professional presentation required for a C-suite corporate headquarters. Technical Requirements: Qualifications: Strictly minimum Level 3 (or equivalent) in an Electrical or Mechanical engineering discipline. Experience: Proven track record as a Lead Engineer or Technical Supervisor within a high-end commercial office, corporate banking, or premium tenant-facing contract . Systems Knowledge: Highly proficient in modern CAFM software (e.g., Concept, Maximo) and building management systems (BMS). Professional Attributes: Corporate Mindset: Exceptional interpersonal and communication skills, with the capability to translate complex engineering challenges into clear, reassuring advice for the client. Resilience: A composed leader who can make calm, logical, and decisive technical calls during high-pressure emergency fault scenarios. Why Join the Team? We believe in empowering our engineering leaders and providing a world-class environment for career development: Premium Environment: Work within a clean, modern, and highly sophisticated corporate asset. Career Progression: Clear, structured pathways into Technical Account Management and Contract Management. Comprehensive Training: Funded access to internal leadership development programmes and advanced technical training (including HVAP/Authorised Person status). Excellent Benefits: Competitive pension scheme, private healthcare options, and a performance-related bonus scheme. If you are a professional technical leader ready to drive operational excellence for a premium corporate tenant, apply today. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Plant Mechanic / Plant Fitter Construction Equipment High Wycombe Up to £40,000 + Overtime + Bonus Permanent Full-Time Monday to Friday 8:00am 4:30pm Join a Growing Business Where Your Skills Matter Are you an experienced Plant Mechanic or Plant Fitter looking for a role where you'll be valued, trusted, and given the autonomy to do the job properly? We're looking for a skilled engineer to join a well-established, family-run construction equipment business with over 40 years of industry success. This is an excellent opportunity to become a key member of a close-knit team where quality workmanship, customer service, and long-term relationships are genuinely valued. If you take pride in fault-finding, problem-solving, and keeping machinery operating at its best, we'd love to hear from you. About the Role Working within our busy workshop, you'll be responsible for maintaining, servicing, and repairing a range of specialist construction equipment used across the plastering, rendering, and screeding sectors. Your duties will include: Servicing and repairing our hire fleet of specialist construction machinery Diagnosing and resolving mechanical and electrical faults Carrying out repairs and maintenance on customer-owned equipment Performing safety inspections and ensuring machinery is ready for hire Completing service records, inspection reports, and certification paperwork Providing occasional technical support and advice to customers Supporting site visits, breakdowns, or deliveries when required Maintaining a safe, clean, and organised workshop environment You'll work closely with the Workshop Manager and experienced colleagues, with the freedom to use your expertise rather than being tied to unnecessary corporate processes. What We're Looking For This is a role for an experienced engineer who can work independently and confidently diagnose faults. Ideally, you'll have: Proven experience as a Plant Fitter, Plant Mechanic, Service Engineer, or similar Strong mechanical and electrical fault-finding skills Experience working on plant, construction equipment, industrial machinery, or similar A practical, hands-on approach with excellent problem-solving ability Good organisational and communication skills A positive, team-oriented attitude A commitment to delivering excellent customer service Experience within the plant hire, construction, agricultural, or industrial equipment sectors would be highly advantageous. What's On Offer? Salary up to £40,000 depending on experience Overtime opportunities Performance-related bonus 28 days holiday including bank holidays Workplace pension scheme Monday to Friday working hours no shifts Ongoing training and development opportunities Free on-site parking Well-equipped workshop and tools Supportive management team Long-term career stability within a growing business Why Join Us? This is more than just another fitting role. You'll be joining a respected family business where your contribution is recognised, your experience is valued, and you'll play an important part in the continued growth of the company. If you're looking for a stable, rewarding role with a business that genuinely appreciates skilled engineers, we'd love to hear from you.

Role: Handy Person / Fabric Technician Shifts: Monday Friday 7 30 Salary: Up to £39,000 Opportunity: Fabric Technician required to support the maintenance and upkeep of 26 stations from Central London to the Southeast Coast. You ll be the driving force behind keeping stations safe, functional, and welcoming for both passengers and staff - handling a wide range of maintenance tasks that keep the network moving. If you thrive on variety, responsibility, and the satisfaction of seeing the impact of your work across an entire region, this is a standout opportunity to elevate your career. What you ll be doing: Delivering planned preventative maintenance (PPM) and reactive repairs across mechanical, and building fabric systems. Working with external contractors and internal teams to meet service standards and deadlines. Assisting with small-scale projects such as refurbishments and estate improvements. Carrying out practical maintenance tasks including door repairs, lighting fixes, PAT testing, basic plumbing, and general building upkeep. What we re looking for: Background in Fabric Technician, building services, or a similar multi-skilled engineering role. Detail-focused with a strong commitment to health & safety. Good communication skills and a collaborative working style. Full UK driving licence and willingness to travel within the region. About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.