Job Opportunity: Mechanical Maintenance Engineer Location: London, Stratford Shift: Monday - Friday 8am - 5pm Site Type: Large Static Education Campus Salary: 42,000 - 44,000 + Overtime About the Role Are you an experienced Mechanical Maintenance Engineer looking for a stable, localised role with an excellent work-life balance? Key Responsibilities Planned & Reactive Maintenance: Carry out PPMs (Planned Preventative Maintenance) and reactive repairs across a diverse range of mechanical plant and building services. System Oversight: Maintain and fault-find on HVAC systems, commercial heating plant, pumps, valves, AHUs, FCUs, and hot/cold water distribution networks. Minor Installations: Undertake small-scale mechanical installation and pipework modifications as required. Compliance & Safety: Ensure all work adheres to strict health and safety regulations, maintaining accurate compliance logs and work records. Subcontractor Liaison: Escort and monitor external specialist contractors when required on-site. What We Are Looking For Qualifications: City & Guilds / NVQ Level 2 or 3 in Mechanical Engineering, Plumbing, or Heating & Ventilation (or equivalent relevant apprenticeship). Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
26/06/2026
Full time
Job Opportunity: Mechanical Maintenance Engineer Location: London, Stratford Shift: Monday - Friday 8am - 5pm Site Type: Large Static Education Campus Salary: 42,000 - 44,000 + Overtime About the Role Are you an experienced Mechanical Maintenance Engineer looking for a stable, localised role with an excellent work-life balance? Key Responsibilities Planned & Reactive Maintenance: Carry out PPMs (Planned Preventative Maintenance) and reactive repairs across a diverse range of mechanical plant and building services. System Oversight: Maintain and fault-find on HVAC systems, commercial heating plant, pumps, valves, AHUs, FCUs, and hot/cold water distribution networks. Minor Installations: Undertake small-scale mechanical installation and pipework modifications as required. Compliance & Safety: Ensure all work adheres to strict health and safety regulations, maintaining accurate compliance logs and work records. Subcontractor Liaison: Escort and monitor external specialist contractors when required on-site. What We Are Looking For Qualifications: City & Guilds / NVQ Level 2 or 3 in Mechanical Engineering, Plumbing, or Heating & Ventilation (or equivalent relevant apprenticeship). Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
PURPOSE OF POST: To organise and supervise a Street Cleansing crew and to ensure that street cleansing operations are carried out within the Borough of Luton. PRINCIPAL RESPONSIBILITIES: Clear all litter and dumped items within the Borough of Luton, the cleansing contract and provision of services under Best Value, including manual and mechanical sweeping, litter picking, wet washing, litter bin cleansing, clearing garage sites, clearing waste land, clearing up after special events, and clearing up after Road Traffic Accidents, weed spraying and gully cleansing. Undertake daily routine safety and maintenance checks to the vehicle to ensure that compliance to the Road Traffic Act and Transport Policy are kept to. Ensure that all necessary information that needs recorded is completed on time and accurately. Drive and manoeuvre a side loader van and trailer in a safe and effective manner, undertaking daily routine safety and maintenance checks to the vehicles. Drive and manoeuvre an applied sweeper, or other plant and equipment as may be required. Undertake on-site assessments of working conditions, health and safety risks, and safe working practices when undertaking street cleansing tasks and take any appropriate action to minimise risks to employees and members of the public. Report appropriate problems or defects to the Street Cleansing Supervisor for further action to be taken. Provide cover as a relief crew member for sickness/other absence occurring in Refuse Collection services. Person Specification: Carrying out litter picking and changing bins Demonstrable driving experience, preferably in an urban environment Able to follow verbal and written instructions Able to accurately record information, assessments and log sheet Demonstrable organisation skills - able to react to changing work demands at short notice Able to deal with members of the public in a polite and helpful manner Current driving license with 4.5t A pair of safety boots Mon / Thursday is 6am till 14.30 and Friday is 6am till 11.00. Monday to Thursday is an 8 hour day with a 30-minute lunch break, working 37 hours per week. Time and half is paid for hours worked over 37 and double time for Bank holidays and Sundays worked About Us Luton Borough Council have partnered with Kent Commercial Service to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract and interim roles at the Council. Our heritage and being local government owned means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates.
26/06/2026
Seasonal
PURPOSE OF POST: To organise and supervise a Street Cleansing crew and to ensure that street cleansing operations are carried out within the Borough of Luton. PRINCIPAL RESPONSIBILITIES: Clear all litter and dumped items within the Borough of Luton, the cleansing contract and provision of services under Best Value, including manual and mechanical sweeping, litter picking, wet washing, litter bin cleansing, clearing garage sites, clearing waste land, clearing up after special events, and clearing up after Road Traffic Accidents, weed spraying and gully cleansing. Undertake daily routine safety and maintenance checks to the vehicle to ensure that compliance to the Road Traffic Act and Transport Policy are kept to. Ensure that all necessary information that needs recorded is completed on time and accurately. Drive and manoeuvre a side loader van and trailer in a safe and effective manner, undertaking daily routine safety and maintenance checks to the vehicles. Drive and manoeuvre an applied sweeper, or other plant and equipment as may be required. Undertake on-site assessments of working conditions, health and safety risks, and safe working practices when undertaking street cleansing tasks and take any appropriate action to minimise risks to employees and members of the public. Report appropriate problems or defects to the Street Cleansing Supervisor for further action to be taken. Provide cover as a relief crew member for sickness/other absence occurring in Refuse Collection services. Person Specification: Carrying out litter picking and changing bins Demonstrable driving experience, preferably in an urban environment Able to follow verbal and written instructions Able to accurately record information, assessments and log sheet Demonstrable organisation skills - able to react to changing work demands at short notice Able to deal with members of the public in a polite and helpful manner Current driving license with 4.5t A pair of safety boots Mon / Thursday is 6am till 14.30 and Friday is 6am till 11.00. Monday to Thursday is an 8 hour day with a 30-minute lunch break, working 37 hours per week. Time and half is paid for hours worked over 37 and double time for Bank holidays and Sundays worked About Us Luton Borough Council have partnered with Kent Commercial Service to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract and interim roles at the Council. Our heritage and being local government owned means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates.
Building Services Engineer Bank/Monument Area (with occasional travel to Chelmsford) Up to £48,000 + Paid Overtime & Call-Out Pareto FM Full-Time About the Role Pareto FM has an exciting opportunity for an experienced Building Services Engineer to join our on-site engineering team supporting a prestigious insurance client in the heart of the City of London. Based primarily at a premium commercial office environment near Bank/Monument London, you'll play a key role in ensuring critical building services remain safe, compliant, and fully operational. This is a hands-on position suited to an engineer who enjoys taking ownership of their work, building strong client relationships, and working as part of a collaborative team. With a mix of planned preventative maintenance, reactive works, compliance activities, and critical plant monitoring, no two days are the same. The Role As a Building Services Engineer, you'll be responsible for maintaining and supporting a wide range of mechanical and electrical building services systems, ensuring excellent service delivery and a first-class workplace experience for the client. While this is not a management role, you'll be trusted to work independently, support colleagues, and demonstrate leadership through your technical expertise, professionalism, and reliability. What You'll Be Doing Delivering planned preventative maintenance (PPM) and reactive maintenance across M&E systems Fault finding and repairing HVAC systems including AHUs, FCUs, VAVs, pumps, and motors Monitoring and responding to BMS alarms and critical building systems Supporting UPS systems and critical infrastructure maintenance Completing statutory inspections and compliance-related tasks Updating CAFM systems accurately with completed works and follow-up actions Managing permits to work and supporting subcontractors on site Conducting routine plant inspections and identifying opportunities for improvement Ensuring all maintenance activities are carried out safely and in accordance with site procedures Acting as a professional day-to-day point of contact for the client and building occupants Supporting the wider engineering team to ensure service excellence across the site Working Environment Predominantly based at a premium commercial office building near Liverpool Street Occasional paid travel to a satellite site in Chelmsford Fast-paced and varied commercial office environment High-profile client with high standards and expectations Collaborative and supportive engineering culture Working Hours & Call-Out 40-hour week, Monday to Friday Alternating shift pattern: Early Shift: 07:00 - 16:00 Late Shift: 09:00 - 18:00 Paid overtime opportunities available, including evenings and weekends Optional on-call rota, currently 1 in 3 £100 standby payment per on-call period Minimum 4 hours paid per call-out at overtime rates Team & Support Structure You'll be joining a close-knit on-site engineering team currently consisting of two full-time engineers, supported by: Site-Based Technical Manager Wider Contract Support Team Regular weekly team meetings Face-to-face collaboration and knowledge sharing A genuine "one-team" culture where engineers support each other and work together to deliver excellent service What We're Looking For Essential Qualifications Trade background in Electrical or Mechanical Engineering Trained to City & Guilds standard or equivalent City & Guilds 2330 Level 2 & 3 (Electrical) or equivalent City & Guilds 6035 Level 3 (Mechanical/Plumbing) or equivalent Legionella L8 Awareness (or willingness to undertake training) Essential Experience Experience working within Building Services, Facilities Management, or Commercial Maintenance environments Strong background in planned and reactive maintenance Experience fault finding across mechanical and electrical systems Knowledge of HVAC plant, BMS systems, emergency lighting, and compliance activities Experience using CAFM systems and digital maintenance platforms Excellent communication and customer service skills Personal Attributes Self-motivated and proactive Professional and client-focused Organised with strong attention to detail Calm under pressure and confident solving technical issues Team-oriented with a positive approach to supporting colleagues Training & Progression Pareto FM is committed to investing in its people and providing genuine long-term career development opportunities. Successful candidates will have access to: Structured technical and compliance training Internal e-learning programmes Coaching and mentoring opportunities ILM leadership and management development programmes Cross-functional development opportunities Career progression pathways within a growing FM business Regular development reviews and succession planning discussions For the right candidate, there are excellent opportunities to progress into senior engineering, supervisory, management, or specialist technical roles. Why Join Pareto FM? Single high-profile site with minimal travel requirements Supportive management team and collaborative engineering culture Paid overtime and structured call-out arrangements Exposure to premium facilities and critical building systems Subsidised food allowance plus unlimited tea and coffee on site Strong focus on training, development, and progression Opportunity to build a long-term career within a growing and ambitious FM business If you're an experienced Building Services Engineer looking for a stable role within a prestigious City location, we'd love to hear from you.
26/06/2026
Full time
Building Services Engineer Bank/Monument Area (with occasional travel to Chelmsford) Up to £48,000 + Paid Overtime & Call-Out Pareto FM Full-Time About the Role Pareto FM has an exciting opportunity for an experienced Building Services Engineer to join our on-site engineering team supporting a prestigious insurance client in the heart of the City of London. Based primarily at a premium commercial office environment near Bank/Monument London, you'll play a key role in ensuring critical building services remain safe, compliant, and fully operational. This is a hands-on position suited to an engineer who enjoys taking ownership of their work, building strong client relationships, and working as part of a collaborative team. With a mix of planned preventative maintenance, reactive works, compliance activities, and critical plant monitoring, no two days are the same. The Role As a Building Services Engineer, you'll be responsible for maintaining and supporting a wide range of mechanical and electrical building services systems, ensuring excellent service delivery and a first-class workplace experience for the client. While this is not a management role, you'll be trusted to work independently, support colleagues, and demonstrate leadership through your technical expertise, professionalism, and reliability. What You'll Be Doing Delivering planned preventative maintenance (PPM) and reactive maintenance across M&E systems Fault finding and repairing HVAC systems including AHUs, FCUs, VAVs, pumps, and motors Monitoring and responding to BMS alarms and critical building systems Supporting UPS systems and critical infrastructure maintenance Completing statutory inspections and compliance-related tasks Updating CAFM systems accurately with completed works and follow-up actions Managing permits to work and supporting subcontractors on site Conducting routine plant inspections and identifying opportunities for improvement Ensuring all maintenance activities are carried out safely and in accordance with site procedures Acting as a professional day-to-day point of contact for the client and building occupants Supporting the wider engineering team to ensure service excellence across the site Working Environment Predominantly based at a premium commercial office building near Liverpool Street Occasional paid travel to a satellite site in Chelmsford Fast-paced and varied commercial office environment High-profile client with high standards and expectations Collaborative and supportive engineering culture Working Hours & Call-Out 40-hour week, Monday to Friday Alternating shift pattern: Early Shift: 07:00 - 16:00 Late Shift: 09:00 - 18:00 Paid overtime opportunities available, including evenings and weekends Optional on-call rota, currently 1 in 3 £100 standby payment per on-call period Minimum 4 hours paid per call-out at overtime rates Team & Support Structure You'll be joining a close-knit on-site engineering team currently consisting of two full-time engineers, supported by: Site-Based Technical Manager Wider Contract Support Team Regular weekly team meetings Face-to-face collaboration and knowledge sharing A genuine "one-team" culture where engineers support each other and work together to deliver excellent service What We're Looking For Essential Qualifications Trade background in Electrical or Mechanical Engineering Trained to City & Guilds standard or equivalent City & Guilds 2330 Level 2 & 3 (Electrical) or equivalent City & Guilds 6035 Level 3 (Mechanical/Plumbing) or equivalent Legionella L8 Awareness (or willingness to undertake training) Essential Experience Experience working within Building Services, Facilities Management, or Commercial Maintenance environments Strong background in planned and reactive maintenance Experience fault finding across mechanical and electrical systems Knowledge of HVAC plant, BMS systems, emergency lighting, and compliance activities Experience using CAFM systems and digital maintenance platforms Excellent communication and customer service skills Personal Attributes Self-motivated and proactive Professional and client-focused Organised with strong attention to detail Calm under pressure and confident solving technical issues Team-oriented with a positive approach to supporting colleagues Training & Progression Pareto FM is committed to investing in its people and providing genuine long-term career development opportunities. Successful candidates will have access to: Structured technical and compliance training Internal e-learning programmes Coaching and mentoring opportunities ILM leadership and management development programmes Cross-functional development opportunities Career progression pathways within a growing FM business Regular development reviews and succession planning discussions For the right candidate, there are excellent opportunities to progress into senior engineering, supervisory, management, or specialist technical roles. Why Join Pareto FM? Single high-profile site with minimal travel requirements Supportive management team and collaborative engineering culture Paid overtime and structured call-out arrangements Exposure to premium facilities and critical building systems Subsidised food allowance plus unlimited tea and coffee on site Strong focus on training, development, and progression Opportunity to build a long-term career within a growing and ambitious FM business If you're an experienced Building Services Engineer looking for a stable role within a prestigious City location, we'd love to hear from you.
HAMILTON ROWE RECRUITMENT SERVICES LTD
City, London
Mechanical Day Shift Engineer Holborn, City of London £47,000 - £50,000 We've got an excellent role for a Mechanical Day Shift Engineer to work on a high end commercial site in the City of London! This is a stand out role if you're looking to carry out additional training and gain Authorised Person status (Mechanical AP) You'll work alongside a well experienced team and be a critical part of the day to day operations. This is a Day Shift position, 4 on / 4 off shift (7am - 7pm), no nights. As a Mechanical Day Shift Engineer, you will carry out PPM and reactive maintenance on mechanical related plant systems, troubleshoot / fault find, diagnose faults, prevent leaks, carry out compliance related tasks, update site logbooks and ensure the client is satisfied with the service provided. Mechanical Day Shift Engineer Duties: PPM and Reactive Maintenance Electrical Fault-Finding, Single & Three Phase Power, Emergency Lighting, Fire Alarms, BMS Operation ,AHUs, FCUs, Generators, VAV/VRFs, Water Treatment (Tap Tests, Dosing, Cooling Tower Checks, etc)., Cooling Towers, Pumps & Motors Site Folders, E-logbooks, Managing Contractors, Audits, Quotations Communicate with the client Mechanical Day Shift Engineer Requirements: City and Guilds / NVQ (Or equivalent) in a mechanical related subject. Apprentice trained (Desirable) Building service maintenance experience At least 3 years experience within commercial building services Salary and Package: £47,000 - £50,000 per annum 4 on / 4 off shift pattern, day shift only AP Status and training 20 days annual leave Company pension scheme Additional training Internal progression Posted by Alex Clark
26/06/2026
Full time
Mechanical Day Shift Engineer Holborn, City of London £47,000 - £50,000 We've got an excellent role for a Mechanical Day Shift Engineer to work on a high end commercial site in the City of London! This is a stand out role if you're looking to carry out additional training and gain Authorised Person status (Mechanical AP) You'll work alongside a well experienced team and be a critical part of the day to day operations. This is a Day Shift position, 4 on / 4 off shift (7am - 7pm), no nights. As a Mechanical Day Shift Engineer, you will carry out PPM and reactive maintenance on mechanical related plant systems, troubleshoot / fault find, diagnose faults, prevent leaks, carry out compliance related tasks, update site logbooks and ensure the client is satisfied with the service provided. Mechanical Day Shift Engineer Duties: PPM and Reactive Maintenance Electrical Fault-Finding, Single & Three Phase Power, Emergency Lighting, Fire Alarms, BMS Operation ,AHUs, FCUs, Generators, VAV/VRFs, Water Treatment (Tap Tests, Dosing, Cooling Tower Checks, etc)., Cooling Towers, Pumps & Motors Site Folders, E-logbooks, Managing Contractors, Audits, Quotations Communicate with the client Mechanical Day Shift Engineer Requirements: City and Guilds / NVQ (Or equivalent) in a mechanical related subject. Apprentice trained (Desirable) Building service maintenance experience At least 3 years experience within commercial building services Salary and Package: £47,000 - £50,000 per annum 4 on / 4 off shift pattern, day shift only AP Status and training 20 days annual leave Company pension scheme Additional training Internal progression Posted by Alex Clark
DAYS ONLY, Monday to Friday, (OTE of 38,000). A major international construction materials company is seeking a motivated Plant /Multi-Skilled Operative. Joining a friendly, supportive team with a family feel, clear development opportunities and a focus on safety and performance. In this hands-on role, you'll support daily operations by operating mobile and static plant, working closely with site management to ensure equipment is used safely, well maintained and running efficiently. Location: Barnstaple; commutable from South Molton, Bideford, Umberleigh, Chulmleigh, Minehead, Ilfracombe, Great Torrington What's in it for you as a Plant / Multi-Skilled Operative Salary between 27,236 to 28,500; with (OTE of 38,000 with overtime & bonus) Strong benefits including a generous company pension, life assurance and enhanced family-friendly support, reflecting the organisation's commitment to employee well-being Weekly productivity bonus Overtime available (including at least 1 Saturday per month Comprehensive well-being resources Continuous learning and development opportunities within a globally respected business A welcoming, friendly, supportive, inclusive workplace Clear progression for the right employee Main responsibilities as a Plant / Multi-Skilled Operative Operate a range of fixed and mobile plant safely and competently Undertake routine upkeep tasks including cleaning, refuelling and greasing machinery Follow manufacturer instructions and company procedures for all equipment Promote a strong safety culture through near-miss reporting and safe behaviours Assist with other quarry tasks as directed by the management team Work effectively with colleagues to ensure steady and productive site operations Requirements for Plant / Multi-Skilled Operative Mobile plant operating tickets or willingness to complete Good understanding of Health & Safety principles and safe working methods Ability to work independently while contributing to a team-focused environment A proactive attitude and commitment to safe site operation Experience in quarrying, aggregates or a comparable industrial setting is advantageous If you're a reliable operator who takes pride in working safely and contributing to a productive environment, we encourage you to apply. Plant / Multi-Skilled Operative we welcome candidates with experience in roles such as Plant Operator, Quarry Operative or Worker, Construction Operative, Groundworker, Forklift or Telehandler Driver, Loading Shovel or Excavator Operator, Heavy Machinery Operator, Factory, Production or Manufacturing Operative, Warehouse or Yard Operative, Materials Handler, Mechanical or Maintenance Technician, Fitter, Labourer, Recycling Operative, Plant Site Worker or Agricultural Machinery Operator. Thank you Fiona E3 Recruitment
25/06/2026
Full time
DAYS ONLY, Monday to Friday, (OTE of 38,000). A major international construction materials company is seeking a motivated Plant /Multi-Skilled Operative. Joining a friendly, supportive team with a family feel, clear development opportunities and a focus on safety and performance. In this hands-on role, you'll support daily operations by operating mobile and static plant, working closely with site management to ensure equipment is used safely, well maintained and running efficiently. Location: Barnstaple; commutable from South Molton, Bideford, Umberleigh, Chulmleigh, Minehead, Ilfracombe, Great Torrington What's in it for you as a Plant / Multi-Skilled Operative Salary between 27,236 to 28,500; with (OTE of 38,000 with overtime & bonus) Strong benefits including a generous company pension, life assurance and enhanced family-friendly support, reflecting the organisation's commitment to employee well-being Weekly productivity bonus Overtime available (including at least 1 Saturday per month Comprehensive well-being resources Continuous learning and development opportunities within a globally respected business A welcoming, friendly, supportive, inclusive workplace Clear progression for the right employee Main responsibilities as a Plant / Multi-Skilled Operative Operate a range of fixed and mobile plant safely and competently Undertake routine upkeep tasks including cleaning, refuelling and greasing machinery Follow manufacturer instructions and company procedures for all equipment Promote a strong safety culture through near-miss reporting and safe behaviours Assist with other quarry tasks as directed by the management team Work effectively with colleagues to ensure steady and productive site operations Requirements for Plant / Multi-Skilled Operative Mobile plant operating tickets or willingness to complete Good understanding of Health & Safety principles and safe working methods Ability to work independently while contributing to a team-focused environment A proactive attitude and commitment to safe site operation Experience in quarrying, aggregates or a comparable industrial setting is advantageous If you're a reliable operator who takes pride in working safely and contributing to a productive environment, we encourage you to apply. Plant / Multi-Skilled Operative we welcome candidates with experience in roles such as Plant Operator, Quarry Operative or Worker, Construction Operative, Groundworker, Forklift or Telehandler Driver, Loading Shovel or Excavator Operator, Heavy Machinery Operator, Factory, Production or Manufacturing Operative, Warehouse or Yard Operative, Materials Handler, Mechanical or Maintenance Technician, Fitter, Labourer, Recycling Operative, Plant Site Worker or Agricultural Machinery Operator. Thank you Fiona E3 Recruitment
Multiskilled Engineer - Electrical Bias Birmingham 38,000 Working between the hours of 2pm - 10pm, Monday - Fri No on call, overtime is however available Brief Multiskilled Engineer - Electrical bias needed for a large well known Facilities Management organisation based in Birmingham who are looking to employ an experienced and well-rounded Multiskilled Engineer - Electrical Bias that takes pride in their work. The successful candidate must hold their - 18th edition, AM2 or JIB Gold Card Approved Electrician status. Benefits Salary: 35,000 - 38,000 per annum 25 day's holiday Pension Plan Career Progression What the role entails: Some of the main duties of the Multiskilled Engineer - Electrical bias will include: Undertake improvement work, maintenance and repairs of electrical and non-complex mechanical plant, services and physical assets including testing and routine fault finding The responsibilities will mainly be at the Acute Hospital, but will also include duties at the Mental Health unit and Retained Estate as required by the Estates management team Undertake any reasonable duties to maintain all services to the NHS Trust Carry out all works in compliance with the clients KPI's and contract Maintain lighting systems, electrical sockets, and related electrical infrastructure. Conduct Residual Current Device (RCD) testing and manage theatre shutdown procedures Support maintenance and breakdown operations across Mechanical and Fabric disciplines Carry out unsupervised maintenance and repairs and report any defects or unusual circumstances to the Supervisor What experience you need to be the successful Multiskilled Engineer - Electrical bias: Electrical Installation - Approved apprenticeship with either: Base electrical qualifications C&G Part A & B City & Guild 236 Part 1 & 2 City & Guilds 2330 / 2365 levels 2 & 3 Diploma EAL Electrical installation QCF Diploma levels 1, 2 & 3 (601/0409/0 & 600/6724/X & 600/9331/6) EAL Level 3 Electrotechnical NVQ or C & G 2357 level 3 NVQ AM2/JIB Gold Card Approved Electrician 18th Edition of the Wiring Regulations C& G 2382-18 Driving licence This really is a fantastic opportunity for a Multiskilled Engineer - Electrical bias to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
25/06/2026
Full time
Multiskilled Engineer - Electrical Bias Birmingham 38,000 Working between the hours of 2pm - 10pm, Monday - Fri No on call, overtime is however available Brief Multiskilled Engineer - Electrical bias needed for a large well known Facilities Management organisation based in Birmingham who are looking to employ an experienced and well-rounded Multiskilled Engineer - Electrical Bias that takes pride in their work. The successful candidate must hold their - 18th edition, AM2 or JIB Gold Card Approved Electrician status. Benefits Salary: 35,000 - 38,000 per annum 25 day's holiday Pension Plan Career Progression What the role entails: Some of the main duties of the Multiskilled Engineer - Electrical bias will include: Undertake improvement work, maintenance and repairs of electrical and non-complex mechanical plant, services and physical assets including testing and routine fault finding The responsibilities will mainly be at the Acute Hospital, but will also include duties at the Mental Health unit and Retained Estate as required by the Estates management team Undertake any reasonable duties to maintain all services to the NHS Trust Carry out all works in compliance with the clients KPI's and contract Maintain lighting systems, electrical sockets, and related electrical infrastructure. Conduct Residual Current Device (RCD) testing and manage theatre shutdown procedures Support maintenance and breakdown operations across Mechanical and Fabric disciplines Carry out unsupervised maintenance and repairs and report any defects or unusual circumstances to the Supervisor What experience you need to be the successful Multiskilled Engineer - Electrical bias: Electrical Installation - Approved apprenticeship with either: Base electrical qualifications C&G Part A & B City & Guild 236 Part 1 & 2 City & Guilds 2330 / 2365 levels 2 & 3 Diploma EAL Electrical installation QCF Diploma levels 1, 2 & 3 (601/0409/0 & 600/6724/X & 600/9331/6) EAL Level 3 Electrotechnical NVQ or C & G 2357 level 3 NVQ AM2/JIB Gold Card Approved Electrician 18th Edition of the Wiring Regulations C& G 2382-18 Driving licence This really is a fantastic opportunity for a Multiskilled Engineer - Electrical bias to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Randstad Construction & Property
City Of Westminster, London
Multi-Skilled Maintenance Engineer (Electrical Bias) Location: Mayfair, London - Static Salary: 48,000 - 50,000 per annum + generous OT opportunities Hours: Monday - Friday, 8:00 AM - 5:00 PM Job Overview We are seeking a professional, electrically-biased Multi-Skilled Maintenance Engineer to maintain a high-end, prestigious commercial office space in Mayfair. You will be responsible for ensuring the flawless operation of landlord and tenant assets within a premier corporate environment. Key Responsibilities Carry out PPM and reactive maintenance across a variety of electrical and mechanical plant. Maintain and fault-find on critical HVAC systems, including cooling towers, chillers, Air Handling Units (AHUs), and commercial boilers . Safely execute and oversee pump maintenance, where installation resistance testing experience is essential . Respond swiftly to minor mechanical, plumbing, and building services fabric issues as required. Manage on-site sub-contractors, ensuring RAMS are compliant and work is completed safely. Maintain accurate logbooks and compliance records to ensure the building meets all statutory regulations. Requirements City & Guilds Level 3 in Electrical Installations (or equivalent). 18th Edition Wiring Regulations. Strong experience in high-end commercial or corporate environments. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
24/06/2026
Full time
Multi-Skilled Maintenance Engineer (Electrical Bias) Location: Mayfair, London - Static Salary: 48,000 - 50,000 per annum + generous OT opportunities Hours: Monday - Friday, 8:00 AM - 5:00 PM Job Overview We are seeking a professional, electrically-biased Multi-Skilled Maintenance Engineer to maintain a high-end, prestigious commercial office space in Mayfair. You will be responsible for ensuring the flawless operation of landlord and tenant assets within a premier corporate environment. Key Responsibilities Carry out PPM and reactive maintenance across a variety of electrical and mechanical plant. Maintain and fault-find on critical HVAC systems, including cooling towers, chillers, Air Handling Units (AHUs), and commercial boilers . Safely execute and oversee pump maintenance, where installation resistance testing experience is essential . Respond swiftly to minor mechanical, plumbing, and building services fabric issues as required. Manage on-site sub-contractors, ensuring RAMS are compliant and work is completed safely. Maintain accurate logbooks and compliance records to ensure the building meets all statutory regulations. Requirements City & Guilds Level 3 in Electrical Installations (or equivalent). 18th Edition Wiring Regulations. Strong experience in high-end commercial or corporate environments. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Heavy Plant Engineer Location: Bicester, Oxfordshire Salary: £40,000 £50,000 per annum, dependent on experience Job Type: Full-Time, Permanent Hours: Monday to Friday, 7:30am 4:30pm, 40 hours per week Overtime: Paid at time and a half after 40 hours We are looking for a skilled Heavy Plant Engineer to join a friendly and busy engineering team based in Bicester. This is a hands-on role working on concrete pumps and associated heavy plant equipment. You ll be involved in servicing, maintenance, diagnostics and repairs, with most work based at the Bicester workshop and occasional travel to customer sites for breakdowns or support. This role could suit a Plant Fitter, Mobile Plant Engineer, Mechanical Fitter, Hydraulic Engineer, Service Engineer or someone with experience working on construction plant, agricultural machinery, HGVs, powered access or similar heavy equipment. Responsibilities As a Heavy Plant Engineer, you will: Diagnose faults and carry out repairs on heavy plant equipment, including truck-mounted and static concrete pumps Complete routine servicing, inspections and preventative maintenance Prepare and inspect equipment before delivery or dispatch Attend customer site breakdowns when required Work on hydraulic, mechanical and electrical systems Maintain accurate service records and job documentation Ensure all work is completed safely and in line with health and safety standards Support the wider workshop and engineering team when required Requirements The ideal candidate will have: Experience working with heavy plant, hydraulics, construction equipment, agricultural machinery, HGVs or similar Strong diagnostic and fault-finding skills Good mechanical knowledge, with basic electrical understanding Experience working on hydraulic systems A full UK driving licence The ability to work independently and as part of a team Good communication and organisational skills A practical, reliable and safety-focused approach Why Join? This is a great opportunity to join a long-established, family-run business with a strong reputation in the concrete equipment industry. Benefits include: £40,000 £50,000 per annum, dependent on experience 21 days holiday Company van and diesel for business use Pension scheme Paid overtime at time and a half after 40 hours Full PPE provided On-site parking Training with UK and international suppliers Opportunity to work on new, specialist and bespoke heavy plant equipment How to Apply Apply now via CV-Library for this Heavy Plant Engineer role in Bicester, Oxfordshire.
24/06/2026
Full time
Heavy Plant Engineer Location: Bicester, Oxfordshire Salary: £40,000 £50,000 per annum, dependent on experience Job Type: Full-Time, Permanent Hours: Monday to Friday, 7:30am 4:30pm, 40 hours per week Overtime: Paid at time and a half after 40 hours We are looking for a skilled Heavy Plant Engineer to join a friendly and busy engineering team based in Bicester. This is a hands-on role working on concrete pumps and associated heavy plant equipment. You ll be involved in servicing, maintenance, diagnostics and repairs, with most work based at the Bicester workshop and occasional travel to customer sites for breakdowns or support. This role could suit a Plant Fitter, Mobile Plant Engineer, Mechanical Fitter, Hydraulic Engineer, Service Engineer or someone with experience working on construction plant, agricultural machinery, HGVs, powered access or similar heavy equipment. Responsibilities As a Heavy Plant Engineer, you will: Diagnose faults and carry out repairs on heavy plant equipment, including truck-mounted and static concrete pumps Complete routine servicing, inspections and preventative maintenance Prepare and inspect equipment before delivery or dispatch Attend customer site breakdowns when required Work on hydraulic, mechanical and electrical systems Maintain accurate service records and job documentation Ensure all work is completed safely and in line with health and safety standards Support the wider workshop and engineering team when required Requirements The ideal candidate will have: Experience working with heavy plant, hydraulics, construction equipment, agricultural machinery, HGVs or similar Strong diagnostic and fault-finding skills Good mechanical knowledge, with basic electrical understanding Experience working on hydraulic systems A full UK driving licence The ability to work independently and as part of a team Good communication and organisational skills A practical, reliable and safety-focused approach Why Join? This is a great opportunity to join a long-established, family-run business with a strong reputation in the concrete equipment industry. Benefits include: £40,000 £50,000 per annum, dependent on experience 21 days holiday Company van and diesel for business use Pension scheme Paid overtime at time and a half after 40 hours Full PPE provided On-site parking Training with UK and international suppliers Opportunity to work on new, specialist and bespoke heavy plant equipment How to Apply Apply now via CV-Library for this Heavy Plant Engineer role in Bicester, Oxfordshire.
Lead Building Services Engineer We are seeking an experienced and driven Lead Building Services Engineer to join our agency team on a high-profile static site in Central London. This role combines hands-on engineering duties with team leadership and statutory compliance, ensuring safe, efficient, and reliable site operation. Key Responsibilities Carry out planned preventative maintenance (PPM ) and reactive works on electrical systems and mechanical plant Fault find and repair building services systems including HV, LV, HVAC, and associated plant Undertake minor works including lamping, basic plumbing repairs, and component replacements Lead and support a team of engineers on site, ensuring works are completed to a high standard, providing day-to-day direction, mentoring, and performance oversight Review and complete RAMS, ensuring all works are carried out safely Ensure all engineering activities meet statutory and site compliance requirements Support incident investigations and implement corrective actions where required Act as the main point of contact on site for technical issues and escalations Requirements Proven experience in a Lead Engineer / Supervisor role within Building Services Strong hands-on experience with electrical and mechanical systems maintenance Experience carrying out PPMs, reactive maintenance, and fault finding Be a commutable distance of Central London Ability to lead engineers while remaining actively involved in day-to-day engineering tasks Experience completing and reviewing RAMS Strong client-facing and communication skills Lead Building Services Engineer: - Up to 55,000 basic + Package Contact Nikki at Tech-People (phone number removed) the specialist recruitment agency and business within HVAC, M&E and Utilities Tech-people are the leading recruitment business and agency within M&E and Construction We are committed to attracting and providing a diverse workforce that reflects the communities in which our clients and stakeholders operate, helping to facilitate an environment that enables everyone to fulfil their potential
23/06/2026
Full time
Lead Building Services Engineer We are seeking an experienced and driven Lead Building Services Engineer to join our agency team on a high-profile static site in Central London. This role combines hands-on engineering duties with team leadership and statutory compliance, ensuring safe, efficient, and reliable site operation. Key Responsibilities Carry out planned preventative maintenance (PPM ) and reactive works on electrical systems and mechanical plant Fault find and repair building services systems including HV, LV, HVAC, and associated plant Undertake minor works including lamping, basic plumbing repairs, and component replacements Lead and support a team of engineers on site, ensuring works are completed to a high standard, providing day-to-day direction, mentoring, and performance oversight Review and complete RAMS, ensuring all works are carried out safely Ensure all engineering activities meet statutory and site compliance requirements Support incident investigations and implement corrective actions where required Act as the main point of contact on site for technical issues and escalations Requirements Proven experience in a Lead Engineer / Supervisor role within Building Services Strong hands-on experience with electrical and mechanical systems maintenance Experience carrying out PPMs, reactive maintenance, and fault finding Be a commutable distance of Central London Ability to lead engineers while remaining actively involved in day-to-day engineering tasks Experience completing and reviewing RAMS Strong client-facing and communication skills Lead Building Services Engineer: - Up to 55,000 basic + Package Contact Nikki at Tech-People (phone number removed) the specialist recruitment agency and business within HVAC, M&E and Utilities Tech-people are the leading recruitment business and agency within M&E and Construction We are committed to attracting and providing a diverse workforce that reflects the communities in which our clients and stakeholders operate, helping to facilitate an environment that enables everyone to fulfil their potential
Hays Construction and Property
Haddenham, Buckinghamshire
Plumber Job at HMP Springhill HP18 0TL 20.28 per Hour - Long Term Temporary Role A Plumber is required for a long term temporary role at HMP Springhill, HP18 0TL. This position offers stable weekday working hours and the opportunity to join a highly committed estates and maintenance team within the HM Prison Service. As a leading recruitment partner to the Ministry of Justice for maintenance and trade professionals, Hays is recruiting a Maintenance Plumber to support the facilities team at HMP Springhill. You will be part of an organisation focused on safety, professional development and long term stability. The prison service is committed to creating a safe, inclusive and supportive workplace that values diversity and provides strong employee benefits including annual leave, pension support and long term job security. The Plumber plays a key role in maintaining essential plumbing, heating and mechanical services across the site, ensuring compliance, safety and high quality maintenance standards. Key Responsibilities You will complete the installation, testing and commissioning of plumbing and mechanical systems in line with your qualifications and Health and Safety regulations. You will deliver planned maintenance, reactive repairs and small works, responding to tasks raised through the CAFM system and prioritising work effectively. Duties include undertaking general maintenance, fault finding, inspections at height and in confined spaces, recording all work accurately, maintaining stock levels and ensuring materials are fit for purpose. You will supervise and support prisoners during relevant work activities, escort and oversee contractors in line with security procedures, operate vehicles and plant equipment when qualified, carry out locking duties and respond safely to emergency or urgent tasks. You will maintain regular radio communication and accept competent or authorised responsibilities under GFSL safe systems of work. Skills and Experience Required To be successful in this role you will hold C&G 6035 (Plumbing), C&G 6189 (Plumbing and Heating), NVQ Level 3 in Plumbing or Level 2 Plumbing. An unvented water heater G3 qualification is required. Being Gas Safe registered is desirable but not essential. You should have at least two years experience as a Plumber with experience in commercial or industrial water and heating systems. You should have good knowledge of planned preventive maintenance, Water Supply Regulations and, ideally L8 Legionella requirements. Legionella training can be provided. This role starts on a temporary basis but offers potential for long term or permanent opportunities within the existing maintenance team. Hours and Pay You will work Monday to Friday, 39 hours per week. Monday to Thursday: 8am to 5pm. Friday: 8am to 4pm. The hourly rate is 20.28 with overtime available through umbrella arrangements. Standard security vetting will be required for this role. How to Apply If you are an experienced Plumber looking for a stable and rewarding maintenance role within a secure environment, we would love to hear from you. Click Apply Now to send your CV or contact us directly for more information. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
23/06/2026
Seasonal
Plumber Job at HMP Springhill HP18 0TL 20.28 per Hour - Long Term Temporary Role A Plumber is required for a long term temporary role at HMP Springhill, HP18 0TL. This position offers stable weekday working hours and the opportunity to join a highly committed estates and maintenance team within the HM Prison Service. As a leading recruitment partner to the Ministry of Justice for maintenance and trade professionals, Hays is recruiting a Maintenance Plumber to support the facilities team at HMP Springhill. You will be part of an organisation focused on safety, professional development and long term stability. The prison service is committed to creating a safe, inclusive and supportive workplace that values diversity and provides strong employee benefits including annual leave, pension support and long term job security. The Plumber plays a key role in maintaining essential plumbing, heating and mechanical services across the site, ensuring compliance, safety and high quality maintenance standards. Key Responsibilities You will complete the installation, testing and commissioning of plumbing and mechanical systems in line with your qualifications and Health and Safety regulations. You will deliver planned maintenance, reactive repairs and small works, responding to tasks raised through the CAFM system and prioritising work effectively. Duties include undertaking general maintenance, fault finding, inspections at height and in confined spaces, recording all work accurately, maintaining stock levels and ensuring materials are fit for purpose. You will supervise and support prisoners during relevant work activities, escort and oversee contractors in line with security procedures, operate vehicles and plant equipment when qualified, carry out locking duties and respond safely to emergency or urgent tasks. You will maintain regular radio communication and accept competent or authorised responsibilities under GFSL safe systems of work. Skills and Experience Required To be successful in this role you will hold C&G 6035 (Plumbing), C&G 6189 (Plumbing and Heating), NVQ Level 3 in Plumbing or Level 2 Plumbing. An unvented water heater G3 qualification is required. Being Gas Safe registered is desirable but not essential. You should have at least two years experience as a Plumber with experience in commercial or industrial water and heating systems. You should have good knowledge of planned preventive maintenance, Water Supply Regulations and, ideally L8 Legionella requirements. Legionella training can be provided. This role starts on a temporary basis but offers potential for long term or permanent opportunities within the existing maintenance team. Hours and Pay You will work Monday to Friday, 39 hours per week. Monday to Thursday: 8am to 5pm. Friday: 8am to 4pm. The hourly rate is 20.28 with overtime available through umbrella arrangements. Standard security vetting will be required for this role. How to Apply If you are an experienced Plumber looking for a stable and rewarding maintenance role within a secure environment, we would love to hear from you. Click Apply Now to send your CV or contact us directly for more information. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Job Description: Job Overview We are seeking a skilled and safety-conscious CPCS Telehandler to join our clients construction team in Catterick Garrison. The successful candidate will operate telehandlers efficiently across various sites, ensuring the safe and effective movement of materials. This role requires a strong understanding of mechanical systems, commercial driving experience, and familiarity with excavators. The position offers an excellent opportunity to contribute to large-scale projects while developing your skills within a professional environment. Responsibilities Operate CPCS-certified telehandlers to lift, move, and position materials on construction sites Conduct routine safety checks and maintenance on equipment to ensure optimal performance Assist with loading and unloading materials from lorries and storage areas Collaborate with site managers and other operatives to coordinate the safe movement of goods Maintain accurate records of equipment usage and inspections Follow all health and safety regulations, including site-specific protocols and procedures Assist with the operation of excavators when required, demonstrating mechanical knowledge and versatility Experience Valid CPCS telehandler certification is essential Proven experience in commercial driving within a construction environment Mechanical knowledge or previous experience working with excavators is highly desirable Prior experience operating similar plant machinery will be advantageous Ability to work effectively both independently and as part of a team in a fast-paced environment This role offers an engaging opportunity for qualified operators eager to contribute to major projects while enhancing their technical skills. Applicants should be committed to safety, reliability, and professionalism at all times.
22/06/2026
Seasonal
Job Description: Job Overview We are seeking a skilled and safety-conscious CPCS Telehandler to join our clients construction team in Catterick Garrison. The successful candidate will operate telehandlers efficiently across various sites, ensuring the safe and effective movement of materials. This role requires a strong understanding of mechanical systems, commercial driving experience, and familiarity with excavators. The position offers an excellent opportunity to contribute to large-scale projects while developing your skills within a professional environment. Responsibilities Operate CPCS-certified telehandlers to lift, move, and position materials on construction sites Conduct routine safety checks and maintenance on equipment to ensure optimal performance Assist with loading and unloading materials from lorries and storage areas Collaborate with site managers and other operatives to coordinate the safe movement of goods Maintain accurate records of equipment usage and inspections Follow all health and safety regulations, including site-specific protocols and procedures Assist with the operation of excavators when required, demonstrating mechanical knowledge and versatility Experience Valid CPCS telehandler certification is essential Proven experience in commercial driving within a construction environment Mechanical knowledge or previous experience working with excavators is highly desirable Prior experience operating similar plant machinery will be advantageous Ability to work effectively both independently and as part of a team in a fast-paced environment This role offers an engaging opportunity for qualified operators eager to contribute to major projects while enhancing their technical skills. Applicants should be committed to safety, reliability, and professionalism at all times.
Discipline: Project Manager Location: North London Start date: Immediate Duration: 6+ months Shifts: 11 day fortnight Week 1: Mon to Fri 7-7, Weekend 7-4.30 Week 2: Mon to Wed 7-7 and Thurs 7-2:30 PAYE Pay Rates: Mon-Sun: £500.00/day, including Holiday Pay Lodge Allowance: £55.00/day worked Travel Allowance: £20.00/hr travelled The Role: Integrate Engineering Resources is currently recruiting for a Project Manager for a major Energy from Waste power station construction project in north London. Duties will include: -Managing all aspects of the project process including initial consultations with customers, preparation of delivery schedules, project resourcing requirements, running of tests through to final project sign off, etc. -Managing the project delivery team including Site Managers, Supervisors, Engineers and mechanical installation teams and sub contractors to ensure the project is delivered on time and to budget -Directing and monitoring logistics on site -Managing the implementation of all plant and machinery -Creation and implementation of risk assessments and method statements -Attending regular meetings with the client -Updating Contracts Managers and Directors on project progress -Ensuring health and safety is adhered to on a daily basis Requirements: -Extensive experience as a Mechanical Site Project Manager -Prior background in the Energy from Waste Power station construction sector -CCNSG card -SMSTS certificate -HND or equivalent in mechanical engineering / construction -Excellent people management skills and a proven ability to manage teams -Ability to make quick decisions and find solutions if any issues or problems arise -Ability to deal with complex tasks and deliver them to a set budget and timescale -Ability to build relationships with clients -Clear communication skills at all levels, both written and verbal. -Strong organisational and time-management skills -Attention to detail - accurate and methodical in work. -Hold a full UK driving licence. About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction and Maintenance sectors. Our specialist recruitment activities range across all areas and include the appointment of all levels of professional into the CHP, Anaerobic Digestion, Combined Cycle Gas Turbine, Coal, Nuclear, Biomass, Energy from Waste, Water Treatment and Wind industries throughout the UK and worldwide
22/06/2026
Contract
Discipline: Project Manager Location: North London Start date: Immediate Duration: 6+ months Shifts: 11 day fortnight Week 1: Mon to Fri 7-7, Weekend 7-4.30 Week 2: Mon to Wed 7-7 and Thurs 7-2:30 PAYE Pay Rates: Mon-Sun: £500.00/day, including Holiday Pay Lodge Allowance: £55.00/day worked Travel Allowance: £20.00/hr travelled The Role: Integrate Engineering Resources is currently recruiting for a Project Manager for a major Energy from Waste power station construction project in north London. Duties will include: -Managing all aspects of the project process including initial consultations with customers, preparation of delivery schedules, project resourcing requirements, running of tests through to final project sign off, etc. -Managing the project delivery team including Site Managers, Supervisors, Engineers and mechanical installation teams and sub contractors to ensure the project is delivered on time and to budget -Directing and monitoring logistics on site -Managing the implementation of all plant and machinery -Creation and implementation of risk assessments and method statements -Attending regular meetings with the client -Updating Contracts Managers and Directors on project progress -Ensuring health and safety is adhered to on a daily basis Requirements: -Extensive experience as a Mechanical Site Project Manager -Prior background in the Energy from Waste Power station construction sector -CCNSG card -SMSTS certificate -HND or equivalent in mechanical engineering / construction -Excellent people management skills and a proven ability to manage teams -Ability to make quick decisions and find solutions if any issues or problems arise -Ability to deal with complex tasks and deliver them to a set budget and timescale -Ability to build relationships with clients -Clear communication skills at all levels, both written and verbal. -Strong organisational and time-management skills -Attention to detail - accurate and methodical in work. -Hold a full UK driving licence. About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction and Maintenance sectors. Our specialist recruitment activities range across all areas and include the appointment of all levels of professional into the CHP, Anaerobic Digestion, Combined Cycle Gas Turbine, Coal, Nuclear, Biomass, Energy from Waste, Water Treatment and Wind industries throughout the UK and worldwide
Yard General Operative The Role: To assist with loading and unloading vehicles and maintain a clean and safe yard area. Working as part of the depot operations team and providing full operational support to all areas of the business. Key Responsibilities: Equipment Hire Load delivery vehicles using system generated paperwork. Ensure all external hauliers have the relevant paperwork and BCS drivers are loaded with allocated deliveries only. Equipment Returns Receive off hired equipment in to the depot, unloading and checking paperwork for accuracy of plant numbers etc. Transfer information from the paperwork supplied to the returns register for processing, highlighting any queries or issues with the administration team. Check equipment for damage and highlight to the Workshop Team Leader. Ensure all equipment is returned into the correct returns area. Service & Maintenance Prepare non mechanical plant for hire; cleaning down, painting and checking ready for hire. Support all hire and Tunnelling operations with various duties including cleaning down equipment and painting. Quality Ensure works are carried out in accordance with processes. Contribute to continuous improvement by providing suggestions and feedback to Management. Work to agreed timescales updating the Team Leader on progress. Maintain good communication with other Team Leaders and Management at all times. HSEQ Complete tasks in accordance with risk assessments, notify the Team Leader of any potential noncompliance. Report accidents and Positive Interventions using the correct methods. Ensure the correct PPE is used in the depots at all times. Maintain excellent levels of housekeeping, ensure areas are free from waste and trip hazards etc. Identify/Submit positive interventions where needed. Work in conjunction with HSEQ policies and procedures. Key relationships: Wallows Lane depot Yard Team Team Leader - Yard Operations Managers Team Leaders - Workshop Fitters Fabricators Head of Hire Person Specification: The successful candidate is likely to meet all of the following criteria: Essential Previous experience loading and unloading vehicles Attention to detail and ability to follow procedures Ability to work well within a team, offering support to others Forklift licence Desirable Previous experience working in a similar role in the plant or equipment hire industry Product knowledge of plant, tools, specialist kit and tunnelling equipment Slinger/Signaller About BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety and construction products based in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Boll , Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dr ger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Flexible working arrangements Annual salary review Continuous service awards
22/06/2026
Full time
Yard General Operative The Role: To assist with loading and unloading vehicles and maintain a clean and safe yard area. Working as part of the depot operations team and providing full operational support to all areas of the business. Key Responsibilities: Equipment Hire Load delivery vehicles using system generated paperwork. Ensure all external hauliers have the relevant paperwork and BCS drivers are loaded with allocated deliveries only. Equipment Returns Receive off hired equipment in to the depot, unloading and checking paperwork for accuracy of plant numbers etc. Transfer information from the paperwork supplied to the returns register for processing, highlighting any queries or issues with the administration team. Check equipment for damage and highlight to the Workshop Team Leader. Ensure all equipment is returned into the correct returns area. Service & Maintenance Prepare non mechanical plant for hire; cleaning down, painting and checking ready for hire. Support all hire and Tunnelling operations with various duties including cleaning down equipment and painting. Quality Ensure works are carried out in accordance with processes. Contribute to continuous improvement by providing suggestions and feedback to Management. Work to agreed timescales updating the Team Leader on progress. Maintain good communication with other Team Leaders and Management at all times. HSEQ Complete tasks in accordance with risk assessments, notify the Team Leader of any potential noncompliance. Report accidents and Positive Interventions using the correct methods. Ensure the correct PPE is used in the depots at all times. Maintain excellent levels of housekeeping, ensure areas are free from waste and trip hazards etc. Identify/Submit positive interventions where needed. Work in conjunction with HSEQ policies and procedures. Key relationships: Wallows Lane depot Yard Team Team Leader - Yard Operations Managers Team Leaders - Workshop Fitters Fabricators Head of Hire Person Specification: The successful candidate is likely to meet all of the following criteria: Essential Previous experience loading and unloading vehicles Attention to detail and ability to follow procedures Ability to work well within a team, offering support to others Forklift licence Desirable Previous experience working in a similar role in the plant or equipment hire industry Product knowledge of plant, tools, specialist kit and tunnelling equipment Slinger/Signaller About BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety and construction products based in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Boll , Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dr ger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Flexible working arrangements Annual salary review Continuous service awards
Ivy Resource Group are currently recruiting for a Multi Skilled Plumber for the UWE contract in Bristol, on a permanent basis. The company: Established in 1998 our client offers renowned high-quality construction projects and facilities management services. They are based in the heart of Bristol and have enjoyed significant success, particularly in the last 4 years with turnover increasing from 56 million in 2020 to a projected 125 million for 2025. To ensure their business remains fully supported they are investing into thier people strategy and infrastructure to give their employees the tools to perform to the best of their ability. If you would like to join a rapidly expanding business that can offer up good opportunities for career development and professional personal growth, you should apply today and let's talk. What will my core responsibilities be? Working as a Multi Skilled Plumber on the UWE contract you will be responsible for undertaking various planned and reactive tasks, from complex repairs to the resolution of minor plumbing issues. You will work closely with their Client and be the main point of contact ensuring that the University's plant and equipment operates in an efficient manner. Work as part of the FM Team with responsibility for the completion of pre-planned maintenance to mechanical plant and associated equipment including but not limited to HWS, CWS, Central Heating, radiators, valves, toilets, showers, etc. Completion of reactive and remedial repairs as directed by the FM Helpdesk to either, plumbing installations, heating installations, ventilation systems etc. or any required minor building fabric repairs dependent on relevant experience. Use your own initiative to solve complicated technical problems associated with reactive maintenance activities, including sourcing parts & materials and seeking manufacturer technical support. Provide detailed write-ups of works carried out to ensure our client is kept up to date at all times. Carry out all works within agreed timescales and to the highest standards, ensuring that you comply with current regulations and contract specifications. Reporting and recording procedures, including operation and maintenance logs and control measures to minimise risks. Utilise PDAs or electronic devices to complete works. Liaise closely with our control hub to ensure efficient response to all works either working on your own or as part of a team. Observe the highest levels of health and safety at all times, including carrying out point of work risk assessments for every task to ensure the best possible working practices are adhered to. Provide regular out-of-hours cover on a rota system. What skills and experience do I need to be successful in this role? NVQ L2 or higher in Plumbing. Hold a minimum of 3+ years' experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance of mechanical systems. Current Full UK Driver's License IT Skills - use of PDA's Salary: 30,000 - 34,000 per annum + Overtime rates Company Van, Fuel Card, Tools and Uniform Working hours: 8am - 5pm How to apply: Please submit your CV or apply online and a member of our team will respond to you. Ivy Resource Group are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. IND123
22/06/2026
Full time
Ivy Resource Group are currently recruiting for a Multi Skilled Plumber for the UWE contract in Bristol, on a permanent basis. The company: Established in 1998 our client offers renowned high-quality construction projects and facilities management services. They are based in the heart of Bristol and have enjoyed significant success, particularly in the last 4 years with turnover increasing from 56 million in 2020 to a projected 125 million for 2025. To ensure their business remains fully supported they are investing into thier people strategy and infrastructure to give their employees the tools to perform to the best of their ability. If you would like to join a rapidly expanding business that can offer up good opportunities for career development and professional personal growth, you should apply today and let's talk. What will my core responsibilities be? Working as a Multi Skilled Plumber on the UWE contract you will be responsible for undertaking various planned and reactive tasks, from complex repairs to the resolution of minor plumbing issues. You will work closely with their Client and be the main point of contact ensuring that the University's plant and equipment operates in an efficient manner. Work as part of the FM Team with responsibility for the completion of pre-planned maintenance to mechanical plant and associated equipment including but not limited to HWS, CWS, Central Heating, radiators, valves, toilets, showers, etc. Completion of reactive and remedial repairs as directed by the FM Helpdesk to either, plumbing installations, heating installations, ventilation systems etc. or any required minor building fabric repairs dependent on relevant experience. Use your own initiative to solve complicated technical problems associated with reactive maintenance activities, including sourcing parts & materials and seeking manufacturer technical support. Provide detailed write-ups of works carried out to ensure our client is kept up to date at all times. Carry out all works within agreed timescales and to the highest standards, ensuring that you comply with current regulations and contract specifications. Reporting and recording procedures, including operation and maintenance logs and control measures to minimise risks. Utilise PDAs or electronic devices to complete works. Liaise closely with our control hub to ensure efficient response to all works either working on your own or as part of a team. Observe the highest levels of health and safety at all times, including carrying out point of work risk assessments for every task to ensure the best possible working practices are adhered to. Provide regular out-of-hours cover on a rota system. What skills and experience do I need to be successful in this role? NVQ L2 or higher in Plumbing. Hold a minimum of 3+ years' experience in a building maintenance role, particularly in relation to planned, reactive and remedial maintenance of mechanical systems. Current Full UK Driver's License IT Skills - use of PDA's Salary: 30,000 - 34,000 per annum + Overtime rates Company Van, Fuel Card, Tools and Uniform Working hours: 8am - 5pm How to apply: Please submit your CV or apply online and a member of our team will respond to you. Ivy Resource Group are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. IND123
Service & Maintenance Engineer (Mechanical Bias) Cambridge £40,000 - £45,000 per annum We are currently recruiting for an experienced Service & Maintenance Engineer with a mechanical bias to join a growing and well-established business operating throughout Cambridge and the surrounding areas. This is an excellent opportunity for a motivated engineer looking for a permanent position with a company that offers a strong pipeline of work, career development opportunities and long-term stability. Service & Maintenance Engineer Duties & Responsibilities • Carrying out planned preventative maintenance (PPM) on mechanical systems and equipment • Diagnosing and repairing mechanical faults • Attending reactive maintenance call-outs • Servicing pumps, motors, valves and associated plant equipment • Fault finding and troubleshooting across a range of mechanical systems • Ensuring all maintenance records and reports are completed accurately • Liaising with clients and site teams to ensure works are completed efficiently • Ensuring compliance with health and safety regulations at all times Service & Maintenance Engineer Requirements • Previous experience in a Service & Maintenance Engineer role • Strong mechanical maintenance and fault-finding experience • Full UK Driving Licence • Ability to work independently and manage workload effectively • Good communication and customer service skills • Knowledge of health and safety procedures D esirable Qualifications & Experience • NVQ Level 2 or 3 in a Mechanical Engineering discipline • Experience working within commercial, industrial or building services environments • Basic electrical fault-finding knowledge • Experience with pumps, HVAC systems, motors and associated plant equipment Service & Maintenance Engineer Package • Competitive salary of £40,000 - £45,000 per annum • Permanent position • Company vehicle provided • Ongoing training and development opportunities • Career progression opportunities • Pension scheme • Immediate starts available If you are an experienced Service & Maintenance Engineer with a mechanical bias looking for a new opportunity, we'd like to hear from you. For more information regarding this Service & Maintenance Engineer opportunity please contact Laura Curtis on (phone number removed).
19/06/2026
Contract
Service & Maintenance Engineer (Mechanical Bias) Cambridge £40,000 - £45,000 per annum We are currently recruiting for an experienced Service & Maintenance Engineer with a mechanical bias to join a growing and well-established business operating throughout Cambridge and the surrounding areas. This is an excellent opportunity for a motivated engineer looking for a permanent position with a company that offers a strong pipeline of work, career development opportunities and long-term stability. Service & Maintenance Engineer Duties & Responsibilities • Carrying out planned preventative maintenance (PPM) on mechanical systems and equipment • Diagnosing and repairing mechanical faults • Attending reactive maintenance call-outs • Servicing pumps, motors, valves and associated plant equipment • Fault finding and troubleshooting across a range of mechanical systems • Ensuring all maintenance records and reports are completed accurately • Liaising with clients and site teams to ensure works are completed efficiently • Ensuring compliance with health and safety regulations at all times Service & Maintenance Engineer Requirements • Previous experience in a Service & Maintenance Engineer role • Strong mechanical maintenance and fault-finding experience • Full UK Driving Licence • Ability to work independently and manage workload effectively • Good communication and customer service skills • Knowledge of health and safety procedures D esirable Qualifications & Experience • NVQ Level 2 or 3 in a Mechanical Engineering discipline • Experience working within commercial, industrial or building services environments • Basic electrical fault-finding knowledge • Experience with pumps, HVAC systems, motors and associated plant equipment Service & Maintenance Engineer Package • Competitive salary of £40,000 - £45,000 per annum • Permanent position • Company vehicle provided • Ongoing training and development opportunities • Career progression opportunities • Pension scheme • Immediate starts available If you are an experienced Service & Maintenance Engineer with a mechanical bias looking for a new opportunity, we'd like to hear from you. For more information regarding this Service & Maintenance Engineer opportunity please contact Laura Curtis on (phone number removed).
Job Title: Mobile Maintenance Technician Location: Glasgow and West Coast Contract Type: Permanent Working Hours: 40 Hours Per Week Salary: 29,111.27 Total Salary, Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for an experienced Mobile Maintenance Technician to join our company, working with one of our major UK supermarket clients. The role will involve carrying out non-technical repairs and minor PPM&'s. You will also assist in carrying out planned and reactive maintenance, electrical, and mechanical plant works at various sites within the designated region. Key Responsibilities: Assist other City Technicians with any major or minor maintenance work. Complete all necessary PPM&'s and reactive maintenance schedules within agreed timescales and to ensure all necessary paperwork is completed accurately and as required. Responding promptly and positively to service call requests from the Helpdesk and to assess the requirements of the job and carry out repairs as necessary. Prioritising and completing minor maintenance and repair work to agreed timescales. Ensuring all tools and equipment necessary to complete minor maintenance and repairs are available and serviceable at all times. Qualifications / Experience: Essential City & Guilds / NVQ trade qualification (Carpentry / Plumbing / Roofing) Previous experience in building maintenance within a commercial / retail environment Desirable but not essential: Ability to maintain and repair a range of equipment. Quality of repairs and maintenance. Speed and efficiency of work. The ideal candidate: Full driving license. Experience using a PDA system. Carried out PPM and reactive maintenance within a similar retail environment.
19/06/2026
Full time
Job Title: Mobile Maintenance Technician Location: Glasgow and West Coast Contract Type: Permanent Working Hours: 40 Hours Per Week Salary: 29,111.27 Total Salary, Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for an experienced Mobile Maintenance Technician to join our company, working with one of our major UK supermarket clients. The role will involve carrying out non-technical repairs and minor PPM&'s. You will also assist in carrying out planned and reactive maintenance, electrical, and mechanical plant works at various sites within the designated region. Key Responsibilities: Assist other City Technicians with any major or minor maintenance work. Complete all necessary PPM&'s and reactive maintenance schedules within agreed timescales and to ensure all necessary paperwork is completed accurately and as required. Responding promptly and positively to service call requests from the Helpdesk and to assess the requirements of the job and carry out repairs as necessary. Prioritising and completing minor maintenance and repair work to agreed timescales. Ensuring all tools and equipment necessary to complete minor maintenance and repairs are available and serviceable at all times. Qualifications / Experience: Essential City & Guilds / NVQ trade qualification (Carpentry / Plumbing / Roofing) Previous experience in building maintenance within a commercial / retail environment Desirable but not essential: Ability to maintain and repair a range of equipment. Quality of repairs and maintenance. Speed and efficiency of work. The ideal candidate: Full driving license. Experience using a PDA system. Carried out PPM and reactive maintenance within a similar retail environment.
We are looking for an experienced Maintenance Engineer to join one of our trusted clients, supporting ongoing site operations. You will have a strong background in both electrical and mechanical maintenance, with the ability to fault find, repair, and maintain key building services systems in a fast-paced environment. Key Responsibilities: Carry out planned preventative maintenance (PPM) and reactive maintenance on a range of commercial building systems. Work with electrical systems including lighting, power distribution, fire alarms, access control, CCTV, BMS, PAT testing and emergency lighting. Maintain mechanical plant including AHUs, FCUs, motors, pumps, seals, chillers, and plumbing systems. Complete daily plant room checks, log BMS readings, and respond effectively to system alarms. Diagnose faults, carry out repairs and ensure first-time fixes wherever possible. Support with small installation works and upgrades. Conduct risk assessments and follow permit-to-work systems and health & safety procedures. Liaise with clients and contractors, ensuring professional service and high standards at all times. Accurately document maintenance activities and materials used. Key Skills & Competencies: 5+ years experience in commercial building maintenance (mechanical and electrical). Strong understanding of BMS, fire alarm systems, electrical isolation's, and PPM schedules. Confident working with HVAC systems including AHUs and FCUs. Excellent fault-finding and problem-solving skills. Good understanding of Health & Safety, RAMS, and safe systems of work. Strong communication, planning, and organisational skills. Ability to work independently and as part of a team. Customer-focused with a professional and proactive approach. Qualifications & Training: Formal qualification in Mechanical or Electrical installation/maintenance(e.g., NVQ or equivalent). 18th Edition qualified (desirable). IPAF training (desirable). Health & Safety trained.
19/06/2026
Seasonal
We are looking for an experienced Maintenance Engineer to join one of our trusted clients, supporting ongoing site operations. You will have a strong background in both electrical and mechanical maintenance, with the ability to fault find, repair, and maintain key building services systems in a fast-paced environment. Key Responsibilities: Carry out planned preventative maintenance (PPM) and reactive maintenance on a range of commercial building systems. Work with electrical systems including lighting, power distribution, fire alarms, access control, CCTV, BMS, PAT testing and emergency lighting. Maintain mechanical plant including AHUs, FCUs, motors, pumps, seals, chillers, and plumbing systems. Complete daily plant room checks, log BMS readings, and respond effectively to system alarms. Diagnose faults, carry out repairs and ensure first-time fixes wherever possible. Support with small installation works and upgrades. Conduct risk assessments and follow permit-to-work systems and health & safety procedures. Liaise with clients and contractors, ensuring professional service and high standards at all times. Accurately document maintenance activities and materials used. Key Skills & Competencies: 5+ years experience in commercial building maintenance (mechanical and electrical). Strong understanding of BMS, fire alarm systems, electrical isolation's, and PPM schedules. Confident working with HVAC systems including AHUs and FCUs. Excellent fault-finding and problem-solving skills. Good understanding of Health & Safety, RAMS, and safe systems of work. Strong communication, planning, and organisational skills. Ability to work independently and as part of a team. Customer-focused with a professional and proactive approach. Qualifications & Training: Formal qualification in Mechanical or Electrical installation/maintenance(e.g., NVQ or equivalent). 18th Edition qualified (desirable). IPAF training (desirable). Health & Safety trained.
Ernest Gordon Recruitment Limited
Northampton, Northamptonshire
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Northampton Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you have experience working on heavy plant, recycling equipment, conveyors, shredders, crushers, or similar industrial machinery, and want a role where no two days are the same? This well-established engineering company specialises in the service, maintenance, installation, and repair of industrial and mobile plant equipment across the UK. Due to continued growth, they are looking to add a skilled Mobile Plant Fitter to their field service team covering customer sites across the North West. In this role, you will travel to customer sites carrying out servicing, fault finding, repairs, and installations on a range of mechanical and electrical plant equipment. The position will also involve fabrication work and welding repairs, so experience in these areas would be highly beneficial. The company requires flexibility around shift patterns and working hours, but provides excellent overtime opportunities and door-to-door pay. The Role: Service, maintain, and repair mobile and industrial plant equipment Diagnose mechanical, hydraulic, and electrical faults Carry out fabrication and welding repairs where required Travel to customer sites across Manchester and surrounding areas Door-to-door paid travel Company vehicle provided The Person: Mobile Plant Fitter, Field Service Engineer, or similar background Mechanical or electrical experience UK Driving License Reference: BBBH25238 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
19/06/2026
Full time
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Northampton Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you have experience working on heavy plant, recycling equipment, conveyors, shredders, crushers, or similar industrial machinery, and want a role where no two days are the same? This well-established engineering company specialises in the service, maintenance, installation, and repair of industrial and mobile plant equipment across the UK. Due to continued growth, they are looking to add a skilled Mobile Plant Fitter to their field service team covering customer sites across the North West. In this role, you will travel to customer sites carrying out servicing, fault finding, repairs, and installations on a range of mechanical and electrical plant equipment. The position will also involve fabrication work and welding repairs, so experience in these areas would be highly beneficial. The company requires flexibility around shift patterns and working hours, but provides excellent overtime opportunities and door-to-door pay. The Role: Service, maintain, and repair mobile and industrial plant equipment Diagnose mechanical, hydraulic, and electrical faults Carry out fabrication and welding repairs where required Travel to customer sites across Manchester and surrounding areas Door-to-door paid travel Company vehicle provided The Person: Mobile Plant Fitter, Field Service Engineer, or similar background Mechanical or electrical experience UK Driving License Reference: BBBH25238 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Multiskilled Shift Engineer Sutton 45,700 + Package Shift pattern - Days - 4 on, 4 off - 7am - 7pm Brief Multiskilled Shift Engineer needed for a large well known Facilities Management organisation based in Sutton who are looking to employ an experienced and well-rounded Multiskilled Shift Engineer that takes pride in their work. The successful candidate must have their 18th Edition and ideally also their 2391 testing and inspecting qualification. Benefits Salary: 43,000 - 45,700 per annum 24 day's holiday Gym membership discounts Cycle to work scheme Holiday purchase scheme Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Multiskilled Shift Engineer will include: Ensure all planned preventive maintenance (PPM) is carried out timely and accurately using PDA and CAFM systems. Manage reactive and breakdown tasks proactively, reporting plant faults and issuing quotations as needed. Maintain safety compliance by conducting Point of Work Risk Assessments and operating within Permit to Work and SHEQ guidelines. Supervise subcontractors, maintain plant rooms to high standards, and participate in the call-out on-call rota with 12-hour shift work (4 on/4 off). What experience you need to be the successful Multiskilled Shift Engineer: A recognised industry-qualified Mechanical or Electrical Engineer, ideally level 3 qualified Experienced in electrical/mechanical building services maintenance with knowledge of th Edition and ideally 2361 inspection qualifications. Skilled in reading mechanical and electrical drawings and competent using CAFM systems. A strong communicator, self-motivated, able to work independently and as part of a team. Holds a full clean driver's licence and can maintain a professional appearance and demeanour. Fluent in English, available for out of hours standby rota, and flexible to work 12-hour shifts (4 on/4 off). This really is a fantastic opportunity for a Multiskilled Shift Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
18/06/2026
Full time
Multiskilled Shift Engineer Sutton 45,700 + Package Shift pattern - Days - 4 on, 4 off - 7am - 7pm Brief Multiskilled Shift Engineer needed for a large well known Facilities Management organisation based in Sutton who are looking to employ an experienced and well-rounded Multiskilled Shift Engineer that takes pride in their work. The successful candidate must have their 18th Edition and ideally also their 2391 testing and inspecting qualification. Benefits Salary: 43,000 - 45,700 per annum 24 day's holiday Gym membership discounts Cycle to work scheme Holiday purchase scheme Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Multiskilled Shift Engineer will include: Ensure all planned preventive maintenance (PPM) is carried out timely and accurately using PDA and CAFM systems. Manage reactive and breakdown tasks proactively, reporting plant faults and issuing quotations as needed. Maintain safety compliance by conducting Point of Work Risk Assessments and operating within Permit to Work and SHEQ guidelines. Supervise subcontractors, maintain plant rooms to high standards, and participate in the call-out on-call rota with 12-hour shift work (4 on/4 off). What experience you need to be the successful Multiskilled Shift Engineer: A recognised industry-qualified Mechanical or Electrical Engineer, ideally level 3 qualified Experienced in electrical/mechanical building services maintenance with knowledge of th Edition and ideally 2361 inspection qualifications. Skilled in reading mechanical and electrical drawings and competent using CAFM systems. A strong communicator, self-motivated, able to work independently and as part of a team. Holds a full clean driver's licence and can maintain a professional appearance and demeanour. Fluent in English, available for out of hours standby rota, and flexible to work 12-hour shifts (4 on/4 off). This really is a fantastic opportunity for a Multiskilled Shift Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Job Title: Workshop-Based Mobile Plant Fitter Location: Workshop-based with site coverage across Essex & surrounding counties Hours: Full-time, Monday Friday, 7:30 AM 5:00 PM Salary: £35,000 - £39,000 per year (dependent on experience) Requirements: Own tools required Full clean UK Driving Licence essential About the Role: Are you an experienced Mobile Plant Fitter looking for a role that offers variety, stability, and a wellequipped modern workshop? We are seeking a skilled and self-motivated Workshop-Based Mobile Plant Fitter to maintain and repair a diverse range of leading-brand equipment, including JCB, Komatsu, Bomag, Thwaites, Hamm, Powerscreen, John Deere, and Bell. Key Responsibilities: Diagnose and repair mechanical, electrical, and hydraulic faults on a variety of plant and machinery Carry out PAT testing, PDI inspections, and routine servicing Perform reactive and preventative maintenance, both in the workshop and on-site when required Maintain accurate service records and documentation Adhere to manufacturer guidelines and industry best practices from fault analysis through to completion Equipment You ll Work On: Excavators, Dumpers & Dump Trucks Crushers, Screeners & Wheeled Loaders Disc Cutters, Generators & Water Pumps Lifting Equipment, Hydraulic Attachments & Hand Tools Compaction Equipment, Skid Steers & Site Cabins What We re Looking For: Minimum 5 years experience in a Mobile Plant Fitter role Strong knowledge of mechanical, electrical, and hydraulic systems Expertise in computer diagnostics High level of accuracy and attention to detail precise documentation is essential A team player who is reliable, flexible, and works well under pressure Self-motivated with the ability to diagnose and repair efficiently Why Join Us? Modern Workshop Fully equipped with the latest tools & overhead gantry crane Varied Role A mix of workshop-based and mobile work across sites Stable, Long-Term Career Join a growing, well-established company Competitive Pay & Immediate Start On-Site Parking Available
17/06/2026
Full time
Job Title: Workshop-Based Mobile Plant Fitter Location: Workshop-based with site coverage across Essex & surrounding counties Hours: Full-time, Monday Friday, 7:30 AM 5:00 PM Salary: £35,000 - £39,000 per year (dependent on experience) Requirements: Own tools required Full clean UK Driving Licence essential About the Role: Are you an experienced Mobile Plant Fitter looking for a role that offers variety, stability, and a wellequipped modern workshop? We are seeking a skilled and self-motivated Workshop-Based Mobile Plant Fitter to maintain and repair a diverse range of leading-brand equipment, including JCB, Komatsu, Bomag, Thwaites, Hamm, Powerscreen, John Deere, and Bell. Key Responsibilities: Diagnose and repair mechanical, electrical, and hydraulic faults on a variety of plant and machinery Carry out PAT testing, PDI inspections, and routine servicing Perform reactive and preventative maintenance, both in the workshop and on-site when required Maintain accurate service records and documentation Adhere to manufacturer guidelines and industry best practices from fault analysis through to completion Equipment You ll Work On: Excavators, Dumpers & Dump Trucks Crushers, Screeners & Wheeled Loaders Disc Cutters, Generators & Water Pumps Lifting Equipment, Hydraulic Attachments & Hand Tools Compaction Equipment, Skid Steers & Site Cabins What We re Looking For: Minimum 5 years experience in a Mobile Plant Fitter role Strong knowledge of mechanical, electrical, and hydraulic systems Expertise in computer diagnostics High level of accuracy and attention to detail precise documentation is essential A team player who is reliable, flexible, and works well under pressure Self-motivated with the ability to diagnose and repair efficiently Why Join Us? Modern Workshop Fully equipped with the latest tools & overhead gantry crane Varied Role A mix of workshop-based and mobile work across sites Stable, Long-Term Career Join a growing, well-established company Competitive Pay & Immediate Start On-Site Parking Available
