24 jobs found

Duct Fitter Battersea, London Start 22.6.26 6 months £27.00 ph Morson Group need Duct fitters for a commercial project within the education sector in Battersea, London for around 6 months work commencing June 22nd 2026. Working on behalf of the mechanical contractor on site, you will be required to install both plastic and some metal (tin) ductwork to a high standard. You must have a valid CSCS card in order to apply. If you have IPAF this would also be an advantage. Payment will be based on £27.00 per hour working approximately 40-45 hours per week Monday to Friday. The project is expected to last into the new year 2027. Please urgently upload your CV to apply or call the Birmingham office on (phone number removed)

The Just Recruitment Group, is currently recruiting for a UK wide manufacturing-based construction company providing high quality solutions along with excellent customer service. They have a wealth of experience within the industry and understand the importance of producing excellent quality products for their clients. They are looking for a Fitter/Labourer to join the team based near Colchester. This would suit candidates with a groundworks, fencing background. The Fitter position will be traveling to sites to support the Team Leaders and will involve a lot of heavy work such as digging, lifting and manual labour. About you: Willing to work long hours Physical able and willing to do manual labour CSCS card would be preferable Manual labour experience is preferable Driving licence is essential Happy to stay away from home as required Benefits: Competitive salary basic salary plus overtime 20 days holidays plus bank holidays Lots of progression is available for the right candidate as this company like to promote within. Opportunity to be put through training courses This is an excellent opportunity to join a vibrant company on a full time, perm basis.

Pyramid8 are supporting a long-established specialist joinery company with over three decades of experience manufacturing and installing high-quality bespoke timber windows, doors, conservatories, and orangeries throughout Yorkshire. Due to continued growth, we are looking to recruit a full-time Qualified Site Joiner / Timber Window & Door Fitter to join their experienced installation team. Essential Requirements Minimum of 1 year's experience fitting pre-finished timber windows and doors Full UK driving licence Excellent attention to detail with a commitment to producing high-quality work Ability to work independently and as part of a team Reliable, professional, and customer-focused approach Please note: Previous experience installing timber windows and doors is essential for this position. Key Responsibilities Installing timber casement windows Installing timber sliding sash windows Fitting pre-hung external doors and frames Installing conservatories, orangeries, and roof lanterns (preferred but not essential) Maintaining high standards of workmanship and customer satisfaction on every project You will normally work as part of a two-person installation team alongside either an apprentice joiner or an experienced fitter's mate. Full product training will be provided where required. What We Offer Competitive pay, based on experience Company van Fuel card and insurance provided Power tools supplied (applicants must provide their own hand tools) Company uniform and all PPE provided All fixings, trims, and consumables supplied 28 days' paid annual leave Company pension scheme Ongoing training and development Secure, long-established business with an excellent reputation Profit-sharing scheme

We re Hiring: Service Manager Based in Hemel Hempstead Competitive Salary (DOE) Our client have been supporting the UK construction industry with reliable plant hire for over 40 years. Known for our personal service and sustainable solutions, we take pride in doing things differently. People are at the heart of what they do. We re looking for an experienced Service Manager to join their team and lead the service department, ensuring their fleet remains safe, compliant, and ready to perform. This is a fantastic opportunity for a strong people leader with plant industry knowledge, excellent organisation skills, and a drive for continuous improvement. Service Manager - What you'll do As an essential part of the Service team, you'll: Manage the day-to-day running of the service department effectively Oversee hire equipment checks, including Service Red Pen Checks Lead workshop health & safety standards and safe working practices Manage major and minor repairs to maximise equipment availability Supervise and support workshop staff performance and development Ensure statutory training is up to date across the team Maintain workshop and yard compliance standards Process workshop staff timesheets accurately and on time Deliver toolbox talks and regular team briefings Communicate performance targets, objectives, and company updates to staff Analyse weekly purchase order reports to identify savings and highlight overspend Support recruitment of workshop fitters when required Drive improvements in engagement, productivity, and retention across the team Service Manager - What we're looking for We re looking for an experienced professional who brings energy, leadership, and accountability to this role. Proven experience in a management or supervisory role Strong leadership and team management skills Organised, driven, and focused approach to work Excellent attention to detail Ability to meet strict deadlines in a fast-paced environment Strong communication and people management skills Health & Safety focused mindset Good knowledge of Microsoft Excel NVQ Level 3 in Plant Maintenance or equivalent Plant hire, workshop, or construction equipment experience preferred Service Manager - What you'll get A role with purpose and opportunity to make an impact A collaborative and inclusive environment Ongoing learning and development opportunities £250 Love to Learn voucher each year to support your personal growth and learning goals One Volunteer Day per year to spend helping a cause that you care about Subsidised gym membership we ll cover 50% of your monthly cost (subject to criteria) 25 days holiday + bank holidays Enhanced maternity and paternity leave Mental health & wellbeing support programmes Regular team socials and events Forward Assist Recruitment is operating as an employment agency. Forward Assist Recruitment is an Equal Opportunities employer; we welcome applicants from all backgrounds.

TSR are currently recruiting for an experienced Duct Fitter and Duct Fitter's Mate (ideally a pair) to start on Monday in Milton Keynes on a commercial project. Duties: Installation of MVHRS systems Fresh air and extract HVAC systems Project Duration: 20-week project Initially 4 weeks, with the opportunity to continue based on performance Rates: Duct Fitter: £28.00 per hour Duct Fitter's Mate: £17.00 per hour Hours: 7:30am - 4:30pm 8 hours paid per day Requirements: Minimum 3 years' experience Valid CSCS card IPAF certification Own tools To apply, please submit your CV or contact Tayla on (phone number removed).

TSR are currently recruiting for an experienced Duct Fitter and Duct Fitter's Mate (ideally a pair) to start on Monday in Milton Keynes on a commercial project. Duties: Installation of MVHRS systems Fresh air and extract HVAC systems Project Duration: 20-week project Initially 4 weeks, with the opportunity to continue based on performance Rates: Duct Fitter: £28.00 per hour Duct Fitter's Mate: £17.00 per hour Hours: 7:30am - 4:30pm 8 hours paid per day Requirements: Minimum 3 years' experience Valid CSCS card IPAF certification Own tools To apply, please submit your CV or contact Tayla on (phone number removed).

Experienced Window & Door Fitters (Self-Employed) Competitive Rates Consistent Work Company Van, Fuel Card & Tools Provided Why TWC? Competitive self-employed rates Consistent, year-round work Company van provided Fuel card provided Tools provided Premium A+ rated uPVC and aluminium products Work for an established, growing company with a reputation for quality A friendly, experienced team that genuinely supports its installers At TWC Home Improvements , we're continuing to grow, and we're looking for experienced self-employed Window & Door Fitters to join our installation team. If you're the sort of fitter who takes pride in leaving every job spot on, enjoys working with premium products and wants a reliable stream of work without the hassle of chasing the next job, we'd like to hear from you. Working from our Swindon depot , you'll collect your materials before heading out to customer properties across Wiltshire, Oxfordshire and Gloucestershire , delivering first-class installations for homeowners throughout the region. What You'll Be Installing No two days are the same. You'll be installing a range of premium A+ rated uPVC and aluminium products, including: Windows Casement windows Bow bay windows Box bay windows Flush fit windows Fire escape windows Doors Composite doors Stable doors French doors Patio doors Bi-fold doors Every installation is an opportunity to showcase quality craftsmanship, attention to detail and outstanding customer service, ensuring every customer receives the high standard of finish TWC Home Improvements is known for. No chasing work. No quoting jobs. No unnecessary headaches. Just quality installations backed by a business that's built its reputation on doing things properly. What We're Looking For We're after experienced fitters who take genuine pride in their work and understand that every installation reflects both their reputation and ours. Previous experience fitting uPVC and aluminium windows and doors A keen eye for detail and high standards of workmanship Excellent customer service and communication skills A full UK driving licence FENSA experience or registration (preferred but not essential) Ready for Your Next Opportunity? If you're looking for consistent work, premium products and a company that values skilled installers, we'd love to hear from you. Join TWC Home Improvements and become part of a team committed to delivering exceptional workmanship and outstanding customer satisfaction. Apply today or contact Adam Thomley, Head of Recruitment & People Relations, for a confidential conversation. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

Duct Fitters & Duct Mates Required - Ipswich - Immediate Start We are looking for 2 x Ductwork Pairs (Duct Fitter & Duct Mate) for a commercial education project in Ipswich, starting 13th July 2026. The Role: Installation of metal ductwork Commercial/education building project 3-4 month contract 8 hours paid per day Free on-site parking Pay Rates: Duct Fitter: 28.00 per hour Duct Fitter (SSSTS): 31.00 per hour (1 fitter must hold a valid SSSTS) Duct Mate: 21.00 per hour Requirements: Valid CSCS card One Duct Fitter must hold a valid SSSTS certificate Previous experience installing metal ductwork Own tools and full PPE Available to start on 13/07/2026 If you're a duct fitter or duct mate looking for your next contract, apply today with your CV or get in touch for more information. If you're available and interested, please apply today with your CV or get in touch for more information. Tech-People are a leading recruitment business within M&E and Construction. We are committed to attracting and providing a diverse workforce reflective of the communities we serve and supporting an inclusive working environment for all. If you're interested, please apply or contact Gosia at Tech People on (phone number removed) for more information.

This is a Starting Point Recruitment vacancy. My client is recruiting for an Industrial Pump Fitter. You will play a key role within the Pump Repair Department, carrying out the dismantling, inspection, repair, refurbishment, assembly, and testing of a wide range of industrial pumping equipment. Working to high engineering standards, the Pump Fitter is responsible for diagnosing mechanical faults, producing detailed inspection reports, and rebuilding pumps to OEM specifications to ensure safe, reliable, and efficient operation before installation or return to service. This role requires a strong mechanical engineering background, excellent attention to detail, and the ability to work independently while maintaining the highest standards of quality, health and safety, and customer service. Key Responsibilities Dismantle, inspect, repair, refurbish, and reassemble a wide variety of industrial pumps, including centrifugal, positive displacement, submersible, vertical, multistage, and dosing pumps. Conduct thorough mechanical inspections of pumps and associated equipment, identifying wear, damage, failure modes, and potential root causes. Produce clear, accurate inspection reports detailing component condition, recommended repairs, replacement parts, and estimated repair requirements. Measure critical components using precision measuring equipment such as micrometers, vernier calipers, dial indicators, bore gauges, and depth gauges to ensure compliance with engineering tolerances. Replace bearings, seals, shafts, sleeves, impellers, wear rings, gaskets, couplings, mechanical seals, and other rotating equipment components. Assemble pumps to manufacturer specifications, ensuring correct clearances, tolerances, torque settings, and alignment. Perform pressure testing, rotation checks, and functional testing prior to dispatch. Interpret engineering drawings, exploded diagrams, technical manuals, assembly instructions, and repair documentation. Accurately record inspection findings, measurements, repair activities, and parts requirements using workshop documentation or computerized maintenance systems. Assist in diagnosing mechanical failures and recommend cost-effective repair solutions. Ensure all completed work meets company quality standards and customer specifications. Support installation teams where required with commissioning, troubleshooting, or site-based repairs. Maintain workshop housekeeping standards and ensure work areas remain clean, organized, and safe. Participate in continuous improvement initiatives to improve workshop efficiency, repair quality, and turnaround times. Assist with stock control of components, consumables, and tooling. Support emergency repair work and breakdown response where operational requirements demand. Health, Safety & Quality Working in accordance with company's Health & Safety policies and current legislation. Ensure safe use of workshop machinery, lifting equipment, cranes, and power tools. Wear and maintain appropriate PPE at all times. Complete risk assessments and follow safe systems of work. Maintain compliance with Quality Management procedures and environmental standards. Report hazards, near misses, defective equipment, or unsafe working conditions promptly. Promote a culture of continuous improvement, quality workmanship, and safe working practices. Skills & Experience Strong mechanical fitting experience within industrial engineering, rotating equipment, pumps, motors, or similar heavy engineering environments. Good understanding of industrial pump operation, maintenance, and refurbishment. Experience dismantling and rebuilding rotating machinery. Ability to diagnose mechanical faults and determine suitable repair methods. Competent in reading engineering drawings and technical documentation. Experience using precision measuring instruments and workshop equipment. Good understanding of bearings, seals, shafts, couplings, impellers, and alignment principles. Ability to prioritize workloads and work independently with minimal supervision. Strong problem-solving and fault-finding skills. Good written communication skills for producing detailed inspection reports. Computer literate with the ability to complete electronic job documentation where required. Qualifications Essential GCSEs (or equivalent), including Mathematics and English. Apprenticeship in Mechanical Engineering, Mechanical Fitting, Maintenance Engineering, or a related engineering discipline, or equivalent industry experience. Desirable NVQ Level 3 or equivalent in Mechanical Engineering. Experience working with industrial pumps and rotating equipment. Knowledge of electric motors and gearbox assemblies. Health & Safety qualifications such as IOSH Working Safely. Overhead crane, forklift, or lifting and slinging certification. Confined Space or Working at Height training. Experience working within ISO 9001 quality systems. Personal Attributes Excellent attention to detail. Reliable and self-motivated. Strong mechanical aptitude. Able to work both independently and as part of a team. Positive attitude towards continuous improvement. Flexible approach to workload and overtime when required. Commitment to delivering high-quality workmanship and customer satisfaction.

Our client is looking for experienced Fitters and Mates for their commercial refurbishment project. There will be long hours available associated with shop fitting jobs. You will need valid CSCS card and full PPE You will need experience in all aspects of measuring, cutting and installing metal duct work. Rate for Fitter 28.00 per hour Rate for Mate 18.00 per hour Parking available Please contact Dave on (phone number removed) at Tech People the leading M/E recruitment business.

This is a Starting Point Recruitment vacancy. My client is recruiting for an Industrial Pump Fitter. You will play a key role within the Pump Repair Department, carrying out the dismantling, inspection, repair, refurbishment, assembly, and testing of a wide range of industrial pumping equipment. Working to high engineering standards, the Pump Fitter is responsible for diagnosing mechanical faults, producing detailed inspection reports, and rebuilding pumps to OEM specifications to ensure safe, reliable, and efficient operation before installation or return to service. This role requires a strong mechanical engineering background, excellent attention to detail, and the ability to work independently while maintaining the highest standards of quality, health and safety, and customer service. Key Responsibilities Dismantle, inspect, repair, refurbish, and reassemble a wide variety of industrial pumps, including centrifugal, positive displacement, submersible, vertical, multistage, and dosing pumps. Conduct thorough mechanical inspections of pumps and associated equipment, identifying wear, damage, failure modes, and potential root causes. Produce clear, accurate inspection reports detailing component condition, recommended repairs, replacement parts, and estimated repair requirements. Measure critical components using precision measuring equipment such as micrometers, vernier calipers, dial indicators, bore gauges, and depth gauges to ensure compliance with engineering tolerances. Replace bearings, seals, shafts, sleeves, impellers, wear rings, gaskets, couplings, mechanical seals, and other rotating equipment components. Assemble pumps to manufacturer specifications, ensuring correct clearances, tolerances, torque settings, and alignment. Perform pressure testing, rotation checks, and functional testing prior to dispatch. Interpret engineering drawings, exploded diagrams, technical manuals, assembly instructions, and repair documentation. Accurately record inspection findings, measurements, repair activities, and parts requirements using workshop documentation or computerized maintenance systems. Assist in diagnosing mechanical failures and recommend cost-effective repair solutions. Ensure all completed work meets company quality standards and customer specifications. Support installation teams where required with commissioning, troubleshooting, or site-based repairs. Maintain workshop housekeeping standards and ensure work areas remain clean, organized, and safe. Participate in continuous improvement initiatives to improve workshop efficiency, repair quality, and turnaround times. Assist with stock control of components, consumables, and tooling. Support emergency repair work and breakdown response where operational requirements demand. Health, Safety & Quality Working in accordance with company's Health & Safety policies and current legislation. Ensure safe use of workshop machinery, lifting equipment, cranes, and power tools. Wear and maintain appropriate PPE at all times. Complete risk assessments and follow safe systems of work. Maintain compliance with Quality Management procedures and environmental standards. Report hazards, near misses, defective equipment, or unsafe working conditions promptly. Promote a culture of continuous improvement, quality workmanship, and safe working practices. Skills & Experience Strong mechanical fitting experience within industrial engineering, rotating equipment, pumps, motors, or similar heavy engineering environments. Good understanding of industrial pump operation, maintenance, and refurbishment. Experience dismantling and rebuilding rotating machinery. Ability to diagnose mechanical faults and determine suitable repair methods. Competent in reading engineering drawings and technical documentation. Experience using precision measuring instruments and workshop equipment. Good understanding of bearings, seals, shafts, couplings, impellers, and alignment principles. Ability to prioritize workloads and work independently with minimal supervision. Strong problem-solving and fault-finding skills. Good written communication skills for producing detailed inspection reports. Computer literate with the ability to complete electronic job documentation where required. Qualifications Essential GCSEs (or equivalent), including Mathematics and English. Apprenticeship in Mechanical Engineering, Mechanical Fitting, Maintenance Engineering, or a related engineering discipline, or equivalent industry experience. Desirable NVQ Level 3 or equivalent in Mechanical Engineering. Experience working with industrial pumps and rotating equipment. Knowledge of electric motors and gearbox assemblies. Health & Safety qualifications such as IOSH Working Safely. Overhead crane, forklift, or lifting and slinging certification. Confined Space or Working at Height training. Experience working within ISO 9001 quality systems. Personal Attributes Excellent attention to detail. Reliable and self-motivated. Strong mechanical aptitude. Able to work both independently and as part of a team. Positive attitude towards continuous improvement. Flexible approach to workload and overtime when required. Commitment to delivering high-quality workmanship and customer satisfaction.

Kitchen Fitter Horsham 230 per day We have an opportunity for a Kitchen Fitter to provide a high-quality, customer-focused service, delivering a range of kitchen installation, refurbishment, and maintenance works. The role will involve fitting and installing kitchens to a high standard, including associated tiling, plastering, flooring, and finishing works. This position will cover various properties across the Horsham area, ensuring all work is completed safely, efficiently, and to excellent customer satisfaction standards. Responsibilities: Installing and fitting complete kitchen units, worktops, cabinets, sinks, and associated fixtures to a high standard. Carrying out kitchen refurbishment and replacement works within occupied and void properties. Undertaking wall and floor tiling as part of kitchen installation projects. Completing plastering and patch repairs to walls and ceilings before and after kitchen fitting works. Installing and repairing various types of flooring, including vinyl, laminate, and safety flooring. Measuring, cutting, and fitting materials accurately to ensure a high-quality finish. Performing minor carpentry and joinery works associated with kitchen installations. Liaising professionally with residents and providing excellent customer service throughout all works. Ensuring compliance with health and safety regulations, company policies, and industry standards. Identifying and reporting additional repairs, defects, or maintenance requirements discovered during works. Maintaining tools, equipment, and company vehicles in a safe and serviceable condition. Completing job sheets, reports, and associated documentation accurately and promptly. Working efficiently to achieve productivity targets while maintaining high standards of workmanship. Collaborating with other trades, contractors, and colleagues to ensure timely project completion. Maintaining clean, safe, and tidy work areas during and following the completion of works. Requirements: Full UK Driving Licence (manual) Own Van If you've previously worked in the social housing environment and meet the requirements listed, please call Joe on (phone number removed).

About you You enjoy practical, hands on work and take real pride in doing a job properly. You like being out on site, working with your hands and seeing the finished result at the end of the day. You might already work within signage, though you certainly do not have to. If you come from another installation background where quality, attention to detail and professionalism matter, this could be the opportunity you've been looking for. What really matters is your attitude. They are looking for someone who is reliable, eager to learn and wants to build a long term career. Skills can be developed. The right work ethic, willingness to get stuck in and pride in your work are much harder to teach. Your experience You could already be working as a Sign Fitter, Graphics Installer, Vinyl Installer or Vehicle Wrapper. Equally, you may come from another installation background such as shopfitting, exhibition installation, interior fit outs, glazing, cladding, kitchen installation, joinery, flooring, architectural film installation, AV installation or any similar role where you are used to working with tools, following drawings and delivering a quality finish. If you have experience within signage production or large format print and have always wanted to move into installation, this is also a great opportunity. You don't need to know everything on day one. If you have the right attitude and transferable skills, the business is happy to invest in your development. What you will be doing with your experience in this role You will be installing a wide variety of signage, vinyl graphics and visual branding solutions across commercial environments. Every project is different, giving you the opportunity to develop a broad range of installation skills while working alongside an experienced team. You will use your practical ability to install graphics, signage and displays to a high standard, making sure every project is completed safely, professionally and with attention to detail. As your experience grows, you will become involved in more complex installations and continue to develop your technical knowledge across different products and materials. This is a role where no two days are the same. Some days will be spent on local installations, while others may involve larger projects further afield. Throughout it all, you will be supported by a team that wants to see you develop into a highly skilled installer. About the business You would be joining an established signage and graphics business with an excellent reputation for quality and customer service. They deliver a wide variety of signage, graphics and branding projects across multiple sectors, giving their team plenty of variety and the opportunity to work on interesting installations. Rather than looking for someone who already knows everything, they are looking for the right person. Someone who is dependable, takes pride in their work and wants to build a long term career within the signage industry. They are committed to developing their people and providing the training and support needed to help you succeed. Next steps A CV isn't needed to start a conversation, so no matter stage you're at in your job search, get in touch to discuss

TSR are currently recruiting for an experienced Duct Fitter and Duct Fitter's Mate (ideally a pair) to start on Monday in Milton Keynes on a commercial project. Duties: Installation of MVHRS systems Fresh air and extract HVAC systems Project Duration: 20-week project Initially 4 weeks, with the opportunity to continue based on performance Rates: Duct Fitter: £28.00 per hour Duct Fitter's Mate: £17.00 per hour Hours: 7:30am 4:30pm 8 hours paid per day Requirements: Minimum 3 years' experience Valid CSCS card IPAF certification Own tools To apply, please submit your CV or contact Tayla on (phone number removed).

DAYS ONLY, Monday to Friday, (OTE of 38,000). A major international construction materials company is seeking a motivated Plant /Multi-Skilled Operative. Joining a friendly, supportive team with a family feel, clear development opportunities and a focus on safety and performance. In this hands-on role, you'll support daily operations by operating mobile and static plant, working closely with site management to ensure equipment is used safely, well maintained and running efficiently. Location: Barnstaple; commutable from South Molton, Bideford, Umberleigh, Chulmleigh, Minehead, Ilfracombe, Great Torrington What's in it for you as a Plant / Multi-Skilled Operative Salary between 27,236 to 28,500; with (OTE of 38,000 with overtime & bonus) Strong benefits including a generous company pension, life assurance and enhanced family-friendly support, reflecting the organisation's commitment to employee well-being Weekly productivity bonus Overtime available (including at least 1 Saturday per month Comprehensive well-being resources Continuous learning and development opportunities within a globally respected business A welcoming, friendly, supportive, inclusive workplace Clear progression for the right employee Main responsibilities as a Plant / Multi-Skilled Operative Operate a range of fixed and mobile plant safely and competently Undertake routine upkeep tasks including cleaning, refuelling and greasing machinery Follow manufacturer instructions and company procedures for all equipment Promote a strong safety culture through near-miss reporting and safe behaviours Assist with other quarry tasks as directed by the management team Work effectively with colleagues to ensure steady and productive site operations Requirements for Plant / Multi-Skilled Operative Mobile plant operating tickets or willingness to complete Good understanding of Health & Safety principles and safe working methods Ability to work independently while contributing to a team-focused environment A proactive attitude and commitment to safe site operation Experience in quarrying, aggregates or a comparable industrial setting is advantageous If you're a reliable operator who takes pride in working safely and contributing to a productive environment, we encourage you to apply. Plant / Multi-Skilled Operative we welcome candidates with experience in roles such as Plant Operator, Quarry Operative or Worker, Construction Operative, Groundworker, Forklift or Telehandler Driver, Loading Shovel or Excavator Operator, Heavy Machinery Operator, Factory, Production or Manufacturing Operative, Warehouse or Yard Operative, Materials Handler, Mechanical or Maintenance Technician, Fitter, Labourer, Recycling Operative, Plant Site Worker or Agricultural Machinery Operator. Thank you Fiona E3 Recruitment

Our client is looking for experienced Mates for their commercial refurbishment project You will need valid CSCS card and full PPE Your main duties will include assisting Duct Fitters install fan coil units and metal ductwork Rate 18.00 per hour Over time available Parking on site available Please contact Dave on (phone number removed) at Tech People the leading M/E recruitment business

Duct Fitters required Recruitment Specialists Kingston Barnes Ltd are currently recruiting for Duct Fitters to to work Nationally but mainly between Bristol and London M4 Corridor and surrounding areas. Starting ASAP FULL DETAILS = Project = Working on Various Commercial Projects mainly Pub and Restaurant or Gym Refurbishments. Qualifications/Experience = Valid CSCS card or relative qualifications, preferably 2 years minimum experience, but open to discussions on this. Duration = Temporary or Permanent roles available Hours = 45 per week (overtime available when required) Pay Rate = £20.00 per hour (PAYE) or £22.41 per hour (CIS/Self Employed) Also recruiting for Duct Fitter Mates as well. If you are available or just interested in more details about the above role or any other roles we have to offer please call Chris Hallum in the Bristol Office. Kingston Barnes is a construction recruitment agency, our deep rooted knowledge of the industry means we have insight into which companies may suit you which will enable you to achieve your career ambitions. We recruit for a number of developers, contractors & consultancies. If you are looking for a new position please contact our experienced consultants to discuss your career aspirations call our Bristol Office. (By submitting my details, I give my consent for Kingston Barnes to process my personal data as detailed in their privacy policy. This Privacy Policy applies to the personal data of our Candidates, Clients, Suppliers, Referees, Emergency Contacts and our Website Users. Go to our website to view the Kingston Barnes Privacy Policy.)

Assistant Window Fitter Are you the ideal Assistant Window Fitter or handy labourer looking for a trainee opportunity with fast-track career progression in a nationwide company fitting windows & doors with the best in the industry? Our client is currently looking for Assistant Window Fitters to join in the success of this nationwide window & door repair and replacement business. Their window fitters and joiners have been happily servicing Blue Chip insurance companies since 1986. Due to expansion our client is keen to recruit assistant window fitters, working from their flagship branch in Bolton. The ideal UPVC Assistant Window Fitter daily responsibilities include: Removing old windows and doors using hand and power tools. Fit new windows and doors. To take measurements for new fittings and make any bespoke changes. To fix windows, doors, and other products. To clear away any materials left after the job is finished. To repair and replace products as the customer requests. Take part in ongoing training and development. Skills and Experience as an UPVC Assistant Window Fitter The ideal candidate is likely to have some experience of fitting windows, doors and fitting conservatories in UPVC or general building work and keen to progress. The ideal fitter will be trustworthy and able to work on their own initiative when assisting with windows and doors on site. Be Health & Safety conscious. A Driving license is essential. UPVC Assistant Window Fitter - Benefits Good rates of pay depending upon experience + Overtime. 28 days full holiday entitlement per year. Pension Scheme. Company Work wear. Industry leading training and development. Salary A competitive salary whilst training up to 28,132 ( 541 per week) and rapid career progression with salary reviews up to 36,000 ( 700 per week) once fully trained as a competent window fitter. This is a FULL-TIME PAYE career with fast-track progression, NOT a temporary contract. Our client has secured long term contracts with major Insurance companies, this ensures they can GUARANTEE work throughout the year, providing job security and reliability.

Our client is looking for experienced Mates for their commercial refurbishment project You will need : Valid CSCS card Full PPE Basic hand tools Your main duties will include assisting Duct Fitters installing metal ductwork and fan coil units Rate 18.50 per hour Duration 2-3 months Parking on site available Please contact Dave on (phone number removed) at Tech People the leading M/E recruitment business

The Solution Group are currently looking for a number of Fitters Mates to start in Cardiff, assisting duct fitters. MUST HAVE A CSCS CARD AND IPAF -Immediate start -Minimum of 12 months work -Onsite parking available -Weekend overtime available If available, please click 'APPLY' now, or call Edyth on (phone number removed)