5 jobs found

MEP Pre-Construction Manager Padstone require a sharp, commercially minded MEP Pre-Construction Manager to join a well known M&E clients London team. Manager to complete ownership of the MEP pre-construction phase for washroom packages. This is not a standard, generic fit-out role. You will specialise in high-density services, ensuring that complex public health drainage, hot/cold water distribution, specialise extract ventilation, Electrical services and smart lighting systems are perfectly coordinated, budgeted, and procured before site works commence. Key Responsibilities Washroom Design Coordination & BIM Review Interrogate layouts : Review architectural concepts to ensure MEP services can physically fit within tight ceiling voids, IPS panel cavities, and vanity units. (Rudwall Systems) Lead spatial coordination : Use BIM software to map out complex public health drainage gradients and manifold systems, eliminating clashes before manufacturing. Manage client variations : Fast-track technical revisions when clients request high-end modifications to brassware, sensor technologies, or branding. Interrogate documentation and specifications to ensure project compliance. Attend design meetings taking lead where necessary with coordination and resolving issues Liaise with external design consultants to understand how specifications and timelines are managed. Track deliverables and following up on outstanding design items Manage the flow of updated drawings and maintain drawing registers where needed. Prepare technical and sample submittals for review by senior engineers. Check compliance with project standards and manufacturer specifications. Effectively communicate and collaborate within multidisciplinary teams. Manage design and scope changes. Attend Factory Witness Tests (FATs) and Mock-up reviews when appropriate to observe and understand performance verification procedures. Estimating & Value Engineering Assist the commercial Team with the following. Assist in tracking project changes and variations in collaboration with the QS and engineering team. Build precise cost models : Produce accurate MEP estimates specifically tailored to fast-track, high-finish commercial washroom projects. Drive value engineering : Suggest smart alternatives for plant equipment and sanitaryware systems to optimize budgets without losing premium aesthetic appeal. Assess infrastructure : Review existing landlord services and incoming utility capacities to verify they can support the new washroom configurations. Procurement & Subcontractor Tendering Scope turnkey packages : Define precise packages of work for specialized MEP subcontractors (such as public health plumbers, commercial electricians, and commissioning engineers). Level trade tenders : Execute strict like for like comparisons for commercial and technical reviews of all subcontractor returns. Source long-lead items : Secure early procurement for critical, long-lead items like specialized sensor-tap control blocks, bespoke vanity lighting, and commercial booster pumps. Candidate Requirements- Essential Experience & Qualifications London fit-out track record : Minimum 3-5+ years of pre-construction, estimating, or design coordination experience within the London fit-out sector (washroom, commercial CAT B, or hospitality experience is highly advantageous). Technical background : Strong foundation in Building Services Engineering (Mechanical, Electrical, or Public Health/Plumbing bias). Fast-track delivery knowledge : Deep understanding of turnkey, fast-paced project environments where pre-construction accuracy directly dictates on-site speed. Technical & Software Skills BIM / CAD capability : Confident navigating, interrogating, and marking up 2D drawings and 3D models (Navisworks/Revit/AutoCAD). Applicant to have existing skills and knowledge of Excel, Word and Bluebeam. Previous knowledge/Experience of Asite, Aconex and/or Viewpoint, BIMcollab and Revizto Regulations expert : Thorough knowledge of UK Building Regulations (specifically Part G for sanitation, Part L for conservation of fuel and power, and Part F for ventilation). If available and experienced in M&E site and project management please send a cv and call (phone number removed) now.

Flushing Engineer Location: Dudley (Head Office) with National Travel as Required Salary: Up to 45,000 Basic + OTE + Company Benefits + Travel Allowances Example Recruitment Group is delighted to be working in partnership with one of our specialist clients to recruit an experienced Flushing Engineer to join their growing team. This is an excellent opportunity to join a respected business operating across the UK, delivering specialist pre-commission cleaning, flushing and water hygiene services on a wide range of commercial, industrial and healthcare projects. The role offers excellent earning potential, ongoing training and genuine opportunities for career progression. The Role As a Flushing Engineer, you will be responsible for carrying out pre-commission cleaning, closed system flushing and chemical cleaning of heating and chilled water systems. You'll operate flushing rigs, pumps and filtration equipment while ensuring all work is completed safely and in accordance with industry standards. Working alongside experienced engineers, you'll also support larger and more complex projects, making this an excellent opportunity for someone looking to develop their career within the water treatment industry. Key Responsibilities Carry out pre-commission cleaning, flushing and chemical cleaning of closed water systems. Perform back flushing, system cleansing and chemical dosing on heating and chilled water systems. Set up, operate and maintain flushing rigs, pumps and filtration equipment. Undertake water hygiene duties including TMV servicing, tank cleaning and calorifier inspections. Ensure all works comply with current industry standards, company procedures and health & safety requirements. Support senior engineers on larger or more technically challenging projects. Maintain company vehicles, equipment and site documentation to a high standard. Requirements Minimum of 1 year's experience within water treatment, pre-commission cleaning or experience as a remedial plumber? Experience with conventional and CPC filtration flushing. Good understanding of heating and chilled water systems. Knowledge of BSRIA BG29:2021, BG50:2021, HSE ACoP L8 and HSG274 Parts 2 & 3. Legionella Risk Assessor qualification (desirable). Strong health & safety awareness. Basic Microsoft Office skills. Full UK Driving Licence. Willingness to stay away from home on occasion when required. Package & Benefits Basic salary up to 45,000, depending on experience. Overtime and additional earning potential. Company van. Uniform, tablet and laptop provided. 25 days annual leave plus bank holidays. Company pension scheme. Annual salary reviews. Ongoing training and genuine career progression opportunities. If you're an experienced Flushing Engineer looking to join a growing business with a strong reputation and excellent long-term career prospects, we'd love to hear from you. Apply today or contact Example Recruitment Group for a confidential discussion.

Plumber & Pipework Fitter Commercial Vacancies (Ref: R&P-PLUMB26-OX) Location: Oxfordshire & Reading Type: Full Tme Rate of Pay: £Competitive Hourly Rate of Pay + Company Vehicle & Fuel Card The Company: Roberts & Prowse based in Elgin Ind Estate, Swindon, Wiltshire are a Mechanical and Electrical Services Contractor who operate throughout the Home Counties, South West & South East of the UK. Due to sustained success and growth are recruiting for Plumbers & Pipework Fitters to join our busy team working in and around Oxfordshire & Reading. The Role: As a Plumber & Pipework Fitter you will report directly to the Senior Mechanical Contracts Managers, Site Managers and will be given the responsibility for undertaking Mechanical Plumbing & Pipework Fitting Works within commercial environments in and around Oxfordshire & Reading. Duties will include: Carrying out plumbing & pipework fitting installation work as required by the company Carrying out servicing and pre-planned maintenance plumbing tasks Completing all necessary documentation including Field Service Reports as requested by the Senior Mechanical Contracts Managers Supervising all aspects of jobs on site, including labour and materials Meeting all necessary deadlines. Keeping job records, to include any extra works, materials used and any delays incurred Ordering parts in absence of Senior Mechanical Contracts Managers Carrying out all works to a high standard whilst complying with all relevant health and safety standards Liaising with Senior Mechanical Contracts Managers on any safety issues identified and any faulty equipment Our Offer: £Competitive Hourly Rate of Pay Company Vehicle and Fuel Card Company Pension Scheme 28 days a year holiday inclusive of eight current recognised Bank Holidays Company Mobile Industry training and development provided Company uniform and PPE provided The Person: To be considered for this role, you must be fully qualified and have proven, previous experience as a Plumber & Pipework Fitter including: Minimum 3 years experience NVQ Level 2 Cert Proficient commercial / industrial plumbing experience Proficient commercial / industrial pipework fitting experience Commercial Plant Room experience Carry out installations to a high standard A full driving license CSCS Card Holder an advantage IPAF an advantage DBS an advantage Essentially you will be a Time Served Plumber & Pipework Fitter having worked in Commercial Building Services or Construction. Work accurately and effectively with minimal supervision, Works well under pressure. Your previous positions may include: Installation Engineer, Plumbing & Heating Engineer, Plumber, Pipework Engineer, Heating & Plumbing Service Engineer, Plumbing Maintenance Engineer or similar. How to Apply: Ready to join our team and make a difference? Please submit your CV below. We re excited to learn more about you and your skills! If your application is shortlisted, a member of our recruitment team will be in touch to discuss the next steps. Thank you for considering Roberts & Prowse as your next career move.

Plumber & Pipework Fitter Commercial Vacancies (Ref: R&P-PLUMB26-SWI) Location: Swindon, Wiltshire, Oxfordshire, Berkshire, Buckinghamshire Type: Full Tme Category: Commercial, Industrial, Government, Health Care, Local Authority, Education Rate of Pay: £Competitive Hourly Rate of Pay + Company Vehicle & Fuel Card The Company: Roberts & Prowse based in Elgin Ind Estate, Swindon, Wiltshire are a Mechanical and Electrical Services Contractor who operate throughout the Home Counties, South West & South East of the UK. Due to sustained success and growth are recruiting for Plumbers & Pipework Fitters to join our busy team. The Role: As a Plumber & Pipework Fitter you will report directly to the Senior Mechanical Contracts Managers, Site Managers and will be given the responsibility for undertaking Mechanical Plumbing & Pipework Fitting Works within commercial environments in and around the Home Counties, South East & South West. Duties will include: Carrying out plumbing & pipework fitting installation work as required by the company Carrying out servicing and pre-planned maintenance plumbing tasks Completing all necessary documentation including Field Service Reports as requested by the Senior Mechanical Contracts Managers Supervising all aspects of jobs on site, including labour and materials Meeting all necessary deadlines. Keeping job records, to include any extra works, materials used and any delays incurred Ordering parts in absence of Senior Mechanical Contracts Managers Carrying out all works to a high standard whilst complying with all relevant health and safety standards Liaising with Senior Mechanical Contracts Managers on any safety issues identified and any faulty equipment Our Offer: £Competitive Hourly Rate of Pay Company Vehicle and Fuel Card Company Pension Scheme 28 days a year holiday inclusive of eight current recognised Bank Holidays Company Mobile Industry training and development provided Company uniform and PPE provided The Person: To be considered for this role, you must be fully qualified and have proven, previous experience as a Plumber & Pipework Fitter including: Minimum 3 years experience NVQ Level 2 Cert Proficient commercial / industrial plumbing experience Proficient commercial / industrial pipework fitting experience Commercial Plant Room experience Carry out installations to a high standard A full driving license CSCS Card Holder an advantage IPAF an advantage DBS an advantage Essentially you will be a Time Served Plumber & Pipework Fitter having worked in Commercial Building Services or Construction. Work accurately and effectively with minimal supervision, Works well under pressure. Your previous positions may include: Installation Engineer, Plumbing & Heating Engineer, Plumber, Pipework Engineer, Heating & Plumbing Service Engineer, Plumbing Maintenance Engineer or similar. How to Apply: Ready to join our team and make a difference? Please submit your CV below. We re excited to learn more about you and your skills! If your application is shortlisted, a member of our recruitment team will be in touch to discuss the next steps. Thank you for considering Roberts & Prowse as your next career move.

Every successful repair means another family has heating, hot water and peace of mind when they need it most. As a Senior Gas Engineer, you'll keep homes safe, solve technical problems first time where possible, and join a business that values long-term careers rather than short-term fixes. You'll be working across a well-established MOD housing maintenance contract covering a compact local patch, giving you consistent work without excessive travel while opening the door to future progression. As well as High Wycombe, opportunities are available across Oxford, Aylesbury and Slough areas. We also have positions for Gas Installers and Plumbers. What's in it for you Competitive salary of £44,000 £55,000 with regular overtime opportunities Local work across a well-managed patch with limited travel Clear progression into renewables, supervisory or management positions Supportive team environment with experienced colleagues on hand Excellent staff retention within a stable, established business 22 days' holiday plus bank holidays Your responsibilities as Senior Gas Engineer Service, maintain and repair domestic gas appliances across residential properties Diagnose faults and carry out effective repairs to restore heating and hot water Complete gas safety inspections in line with current regulations Deliver a professional service while providing practical solutions for residents Accurately complete job records and required compliance documentation What we're looking for in a Senior Gas Engineer Current domestic ACS qualifications, including core certifications and CKR1 Strong knowledge of boiler servicing, fault diagnosis and repairs Sound understanding of domestic gas safety standards and compliance Full UK driving licence Ability to accurately complete digital or written job documentation If you're ready to take the next step in your career with a business that offers stability, genuine progression and ongoing support, apply today for this Senior Gas Engineer opportunity. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to.