31 jobs found

A further opportunity has just been created due to planned growth and expansion to recruit a talented, experienced and skilled Mechanical Building Services Engineer to join this stable organisation. Highly respected in their sector, this business has multiple customers covering many interesting environments. If you are a multi skilled Building Services Engineer, then please do still apply. You will be responsible for completing a range of Planned Preventive Maintenance tasks, Inspections and required to complete daily, weekly, monthly and 6 monthly PPM tasks adhering to SFG20 requirements. Being a skilled Mechanical Building Services Engineer, you will be suitably qualified in either NVQ Level 3 in Mechanical Engineering / Plumbing / HVAC or equivalent, experience with BMS Controls and HVAC systems, experience with UPS, standby power, lifts, boilers, and HVAC systems. This is a mobile / field based role mainly covering the Midlands and therfore we seek a trustrworthy character happy to work well on their own and deliver great service and pride in your craft. We are looking to shortlist for interview as soon as possible, therefore we strongly urge you to apply with an up to date CV showing clearly your experience as a Building Services Engineer / M&E Engineer / Mechancial Bulding Services Engineer or a Multi Skilled Engineer with a Mechanical Bias. Apply Now!

Mobile Electrical Maintenance Engineer Join a leading FM team covering various high end commercial office spaces in Central London. Monday - Friday (8am - 5pm) 40,000 - 45,000 + optional overtime + van fuel card Sites across Central London Carry out lighting maintenance, including small installations, fault-finding, lamp replacements, ballast changes, control panel work, and power distribution. Service air conditioning systems, including Air Handling Units (AHUs) and Fan Coil Units (FCUs), performing filter changes and cleaning. Undertake water treatment tasks, such as temperature checks Monitor the BMS system, including temperature checks for hot and cold water. Coordinate and supervise subcontractors as needed. Maintain and update site logbooks regularly. Requirements: Level 3 electrical installations or equivalent 18th Edition Full UK drivers license Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Door to door pay Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Upskilling to commercial gas tickets for the right candidates Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a Gas Safe registered Domestic Gas Engineer to join our team, carrying out installation, maintenance, and repair of domestic gas systems and appliances across residential and commercial properties in the Portsmouth area. Day-to-day you'll be: Installing, testing, and commissioning domestic gas appliances (boilers, heaters, cookers) Installing associated pipework, controls, and ventilation systems Conducting planned preventative maintenance (PPM) and reactive maintenance Diagnosing and repairing faults on gas systems including boilers and hot water systems Carrying out routine servicing in line with manufacturer specifications Liaising professionally with customers and providing clear communication Maintaining a clean and safe working environment Building great relationships with clients Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On call rota: 1 in every 6 weeks (additional pay) What You'll Need Essential: Full UK Driving License Valid Gas Safe Registration (with relevant categories for domestic work) Relevant ACS qualifications such as: CCN1, CENWAT, CPA1 Proven experience in domestic environments Strong fault-finding and problem-solving skills Great communication skills and can-do attitude Comfortable using basic IT (email, mobile apps) Desirable: NVQ Level 2 or 3 in Plumbing and Heating (or equivalent) Knowledge of Building Regulations and British Standards Experience with controls and Building Management Systems (BMS) Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career progression opportunities, we'd love to hear from you.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Door to door pay Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Upskilling to commercial gas tickets for the right candidates Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a Gas Safe registered Domestic Gas Engineer to join our team, carrying out installation, maintenance, and repair of domestic gas systems and appliances across residential and commercial properties in the London area. Day-to-day you'll be: Installing, testing, and commissioning domestic gas appliances (boilers, heaters, cookers) Installing associated pipework, controls, and ventilation systems Conducting planned preventative maintenance (PPM) and reactive maintenance Diagnosing and repairing faults on gas systems including boilers and hot water systems Carrying out routine servicing in line with manufacturer specifications Liaising professionally with customers and providing clear communication Maintaining a clean and safe working environment Building great relationships with clients Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On call rota: 1 in every 6 weeks (additional pay) What You'll Need Essential: Full UK Driving License Valid Gas Safe Registration (with relevant categories for domestic work) Relevant ACS qualifications such as: CCN1, CENWAT, CPA1 Proven experience in domestic environments Strong fault-finding and problem-solving skills Great communication skills and can-do attitude Comfortable using basic IT (email, mobile apps) Desirable: NVQ Level 2 or 3 in Plumbing and Heating (or equivalent) Knowledge of Building Regulations and British Standards Experience with controls and Building Management Systems (BMS) Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career progression opportunities, we'd love to hear from you.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Door to door pay Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Upskilling to commercial gas tickets for the right candidates Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a Gas Safe registered Domestic Gas Engineer to join our team, carrying out installation, maintenance, and repair of domestic gas systems and appliances across residential and commercial properties in the Exeter area. Day-to-day you'll be: Installing, testing, and commissioning domestic gas appliances (boilers, heaters, cookers) Installing associated pipework, controls, and ventilation systems Conducting planned preventative maintenance (PPM) and reactive maintenance Diagnosing and repairing faults on gas systems including boilers and hot water systems Carrying out routine servicing in line with manufacturer specifications Liaising professionally with customers and providing clear communication Maintaining a clean and safe working environment Building great relationships with clients Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On call rota: 1 in every 6 weeks (additional pay) What You'll Need Essential: Full UK Driving License Valid Gas Safe Registration (with relevant categories for domestic work) Relevant ACS qualifications such as: CCN1, CENWAT, CPA1 Proven experience in domestic environments Strong fault-finding and problem-solving skills Great communication skills and can-do attitude Comfortable using basic IT (email, mobile apps) Desirable: NVQ Level 2 or 3 in Plumbing and Heating (or equivalent) Knowledge of Building Regulations and British Standards Experience with controls and Building Management Systems (BMS) Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career progression opportunities, we'd love to hear from you.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Door to door pay Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Upskilling to commercial gas tickets for the right candidates Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a Gas Safe registered Domestic Gas Engineer to join our team, carrying out installation, maintenance, and repair of domestic gas systems and appliances across residential and commercial properties in the Bristol area. Day-to-day you'll be: Installing, testing, and commissioning domestic gas appliances (boilers, heaters, cookers) Installing associated pipework, controls, and ventilation systems Conducting planned preventative maintenance (PPM) and reactive maintenance Diagnosing and repairing faults on gas systems including boilers and hot water systems Carrying out routine servicing in line with manufacturer specifications Liaising professionally with customers and providing clear communication Maintaining a clean and safe working environment Building great relationships with clients Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On call rota: 1 in every 6 weeks (additional pay) What You'll Need Essential: Full UK Driving License Valid Gas Safe Registration (with relevant categories for domestic work) Relevant ACS qualifications such as: CCN1, CENWAT, CPA1 Proven experience in domestic environments Strong fault-finding and problem-solving skills Great communication skills and can-do attitude Comfortable using basic IT (email, mobile apps) Desirable: NVQ Level 2 or 3 in Plumbing and Heating (or equivalent) Knowledge of Building Regulations and British Standards Experience with controls and Building Management Systems (BMS) Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career progression opportunities, we'd love to hear from you.

The position is based in Sutton, Surrey. Our client is a market leader in providing Technical M&E service support to the Commercial Building Maintenance sector, covering London, Greater London and South of England. The position is based in Sutton, Surrey. Our client is a market leader in providing Technical M&E service support to the Commercial Building Maintenance sector.They are a small team of highly skilled mobile engineers covering London, Greater London and South of England. Skills and experience: Min level 3 electrician Min 5 years' Experience Must be able to work as part of a small team as well as work alone Should be self-sufficient and able to work on own initiative when needed Essential to have excellent communication skills (both spoken and written). Capable of service and installation works Controls experience an advantage Have a wide knowledge of Building Services including mechanical systems Must have good fault-finding skills Should be keen to develop their skills Should have a flexible approach to the type of work Job: Emergency lighting Testing Power circuit installation Controls and BMS Fault Finding Maintenances Inspections Employees Package: 40 Hours Per week Over Time available (but not guaranteed) 28 days Holiday includng Bank Holidays Company Van and fuel card Work Wear Pension Private Medical Company Phone Training Some of our clients are Government departments so the successful candidate will be required to pass Home Office Security Vetting (SC).

Job Title Mobile Engineer - Electrical (Facilities Maintenance) Job Summary We are seeking a skilled Mobile Engineer with a strong electrical background to perform planned and reactive maintenance across multiple sites. The role involves maintaining electrical systems and supporting general facilities maintenance to ensure buildings operate safely, efficiently, and in compliance with regulations. The successful candidate will travel between sites to diagnose faults, perform repairs, and complete preventive maintenance. Key Responsibilities Electrical Maintenance Carry out planned preventative maintenance (PPM) on electrical systems and equipment. Diagnose and repair faults in power distribution, lighting, emergency lighting, and control panels. Maintain and repair low-voltage electrical systems. Test and inspect electrical installations to ensure safety and compliance. Support maintenance of UPS systems, generators, and switchgear. Facilities Maintenance Perform general building maintenance tasks. Conduct basic checks on HVAC systems, pumps, and motors. Support maintenance of fire alarm and emergency systems. Replace lighting and carry out minor plumbing or mechanical repairs when required. Help maintain overall building services efficiency. Mobile / Site Support Travel between multiple sites to complete maintenance work. Respond to reactive maintenance issues and emergency call-outs. Ensure service delivery meets agreed SLAs and KPIs. Compliance & Safety Follow all health and safety procedures. Maintain accurate maintenance records and service reports. Ensure all work complies with electrical regulations and company policies. Required Qualifications NVQ Level 3 in Electrical Installation or equivalent qualification. City & Guilds Electrical certification or similar. Valid driving licence (required for mobile role). Experience Minimum 3 years experience in electrical maintenance or facilities management. Experience working in commercial, industrial, or public buildings. Experience with both PPM and reactive maintenance. Skills Strong electrical fault-finding and troubleshooting skills. Knowledge of building systems including HVAC and BMS. Ability to work independently across multiple sites. Good communication and reporting skills. Strong problem-solving ability. Preferred 18th Edition Wiring Regulations certification. Experience with BMS systems. Facilities management industry experience. Working Conditions Mobile role covering multiple locations. Occasional on-call or emergency work may be required. Possible shift or weekend work depending on operational needs.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Door to door pay Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a qualified Gas Safe Engineer to join our team, working across both domestic and commercial sites in the Poole area. Day-to-day you'll be: Installing, testing, and commissioning gas appliances (boilers, heaters, cookers) Carrying out planned maintenance and reactive repairs Diagnosing faults on boilers, radiators, hot water systems, and commercial plant rooms Installing pipework, controls, and ventilation systems Servicing equipment to manufacturer specifications Providing excellent customer service on-site Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On-call: 1 in 6 weeks rota (additional pay) What You'll Need Essential: Valid Gas Safe Registration (domestic & commercial categories) ACS qualifications: CCN1, CENWAT, CPA1, or CODNCO1 Proven experience in both domestic and commercial settings Full UK Driving License Strong fault-finding skills Professional attitude and great communication Desirable: NVQ Level 2 or 3 in Plumbing & Heating Knowledge of Building Regulations/British Standards Experience with BMS controls Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career development, we'd love to hear from you.

Why Join KSD Support Services? Fully equipped company van for Business use Fuel card - no fuel costs Trade cards provided Company mobile phone Full uniform and PPE kit supplied Regular overtime available Door to door pay Comprehensive training & development programmes Support for further qualifications and certifications Clear career progression opportunities 20 days holiday + bank holidays Workplace pension - 3% employer, 5% employee contributions About Us KSD Support Services is part of the KSD Group, delivering facilities management services to major clients including Tesco and Stonegate Group across the UK. The Role We're looking for a qualified Gas Safe Engineer to join our team, working across both domestic and commercial sites in the Southampton area. Day-to-day you'll be: Installing, testing, and commissioning gas appliances (boilers, heaters, cookers) Carrying out planned maintenance and reactive repairs Diagnosing faults on boilers, radiators, hot water systems, and commercial plant rooms Installing pipework, controls, and ventilation systems Servicing equipment to manufacturer specifications Providing excellent customer service on-site Hours: 45 hours per week (flexible shifts may include early starts/late finishes) On-call: 1 in 6 weeks rota (additional pay) What You'll Need Essential: Valid Gas Safe Registration (domestic & commercial categories) ACS qualifications: CCN1, CENWAT, CPA1, or CODNCO1 Proven experience in both domestic and commercial settings Full UK Driving License Strong fault-finding skills Professional attitude and great communication Desirable: NVQ Level 2 or 3 in Plumbing & Heating Knowledge of Building Regulations/British Standards Experience with BMS controls Ready to Apply? If you're a Gas Safe registered engineer looking for a stable role with a reputable company, excellent benefits, and real career development, we'd love to hear from you.

Mobile Gas Engineer Meridian are working with a growing M&E contractor across Wales, South-west England, and Midlands who are growing their maintenance team and are looking to bring in a Mobile Gas Engineer to work on contracts around the Hampshire and Dorset area. The role will come with plenty of additional earning potential, and you will be joining a well-established, growing M&E contractor who work on various commercial projects across those regions. Benefits include (but are not exclusive to): Starting salary of c. 42k - 45kp.a (negotiable DoE) Company van and fuel card Overtime opportunities On-call rota for further additional earning potential Training opportunities and many examples of career progression within this company Immediate start available (subject to successful application process) Working on a variety of commercial maintenance jobs within the region Full SSP and pension schemes 31 days holiday (inc. Bank Holidays) Company uniform and specialist tools provided Requirements for this role: Commercial Gas qualifications (e.g. CODNCO1 or equivalent) Valid ACS Commercial Gas certifications (e.g. CIGA1, CORT1, ICPN1, TPCP1/1A) Previous FM/PPM experience, ideally on commercial projects Full UK Driving Licence - there will be travel involved in this role Experience with BMS controls and ideally basic M&E building services knowledge IPAF & PASMA are desirable but not essential Duties include (but are not exclusive to): Carry out PPM and reactive maintenance on commercial gas and combustion systems Service, repair and fault-find on commercial boilers and plant Combustion analysis and efficiency testing Gas safety inspections and certification Maintenance of associated plant (pumps, pressurisation units, expansion vessels, valves) Diagnose faults and carry out necessary remedial works Ensure compliance with gas safety regulations and health & safety standards Complete job sheets and reports via CAFM systems Liaise with site managers and clients Participate in on-call rota (if required) If you're looking to join a growing and reputable M&E building services contractor as a Mobile Gas Engineer then please apply directly to the advert or email (url removed) for more information Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy.

Electrical Bias Building Services Engineer Location: Basingstoke - Portsmouth (mobile role covering Reading to Salisbury) Employment Type: Full-Time, Permanent Salary: Up to 43,000 (dependent on experience) A leading Mechanical & Electrical contractor with a strong family culture is seeking an experienced Electrical Bias Building Services Engineer to join their mobile team. This is a varied role combining electrical expertise with general M&E maintenance, offering stability, career development, and the opportunity to work with a well-respected business. Key Responsibilities Service and maintain BMS front-end systems Carry out planned preventative maintenance (PPM) on electrical systems and mechanical plant Diagnose and repair faults across electrical and mechanical systems Undertake general M&E maintenance tasks, including: Emergency lighting tests Water temperature monitoring AHU and FCU maintenance Minor plumbing repairs Reactive maintenance Provide excellent client-facing service, maintaining strong on-site relationships Participate in on-call rota ( 1 in 4 weeks ) - travel time door to door Requirements NVQ Level 3 (or equivalent) in Electrical Installation or Maintenance 18th Edition Wiring Regulations 2391 Test & Inspect certification Proven experience in PPM, fault finding, and repairs on both electrical and mechanical systems Strong interpersonal and communication skills Computer literacy (experience with Simpro or Verisae advantageous) Based within a commutable distance of Basingstoke Benefits Competitive salary up to 43,000 (DOE) Paid travel time door to door Permanent, stable position within a supportive and collaborative team environment Contact Nikki at Tech-People (phone number removed) the specialist recruitment agency and business within HVAC, M&E and Utilities Tech-people are the leading recruitment business and agency within M&E and Construction We are committed to attracting and providing a diverse workforce that reflects the communities in which our clients and stakeholders operate, helping to facilitate an environment that enables everyone to fulfil their potential

ARE YOU SEEKING A MOBILE COMMERCIAL GAS ENGINEER ROLE COVERING RINGWOOD, HAMPSHIRE AND THE SURROUNDFING AREAS? ARE YOU LOOKING FOR A ROLE WITH FREEDOM TO TRAVEL AND SUPPORT A PORTFOLIO OF CLIENTS? IF YOU WISH TO JOIN AN ORGANISATION THAT OFFERS FLEXIBILITY AND TRAINING Then please get in touch! THE COMPANY Our Client offers a full range of hard facilities management services. From operation and maintenance services to critical engineering and asset management, our directly employed skilled technicians will keep your facilities running smoothly and efficiently to support your built environment. THE OPPORTUNITY We seek a Mobile Commercial Gas Engineer to cover the Ringwood, Hampshire area, responsible for reactive and PPM maintenance to commercial premises. Candidates should possess comprehensive technical skills along with extensive experience in commercial fault finding and rectification and should hold ACS Commercial and Domestic qualifications and preferably Catering. You will be required to have a comprehensive knowledge, both domestic and commercial of most major manufactures i.e Valliant Powermatic, Riello Broag, Combat, Ambi-Rad, Ideal, Potterton, Nu Way and Worcester etc. Good all-round knowledge of heating systems, fixed electrical systems & controls/BMS. Good plumbing skills. Good interpersonal & communicating skills, flexible approach to work/Clients requirements and be a Logical thinker in fault finding situations. Annual salary up to £42,000 plus overtime & standby allowance, company vehicle, pension, tools, PPE, mobile phone. KEY REQUIREMENTS Technically qualified in Mechanical Engineering. (City & Guilds, HNC etc) Commercial & Domestic ACS ACS Commercial and Domestic qualifications Good interpersonal and communication skills. THE APPLICATION PROCESS Please submit all CVs via our website or send directly to (url removed) in the first instance quoting reference CP53 and we will contact you within 3 working days if your application has been successful.

Working in London and the southern home counties. A great Opportunity for a Gas Installation Engineer Client Details The client was established in 1966. We now directly employ 400+ members of staff, yet remain a family run business. We specialise in delivering Gas, Electrical and BMS services to over 15 Registered Providers in London and the South of England. Description To carry out installation of gas boilers, full heating systems and associated equipment such as radiators, cylinders and gas supplies to a high standard. You will be expected to work alongside a close-knit team of Installation Engineers, Sub Contractors, Electricians, builders, surveyors, supervisors, office staff and managers. The role requires the installer to work closely with not only the above but also apprentices to assist with their development in becoming future gas engineers. Profile A Successful candidate must have: Full range of ACS Gas Qualifications including the following elements: 1. CCN1 2. CKR1 3. CENWAT 4. HTR1 5. MET1 6. DAH1 (preferred but not essential) Unvented G3 qualification Hold a full UK manual driving licence Competence in IT system- such as handheld tablet/communicator Experience in high standard of customer service Safety focused approach to customers and work colleagues. Flexible, can do attitudeJob Offer On offer for the candidate is: Holiday allowances for role - 25 days plus bank holidays, after 5 years of service they get an extra days leave per year up to 5 years. So eventually this will increase to 30 days Company vehicle/vehicle allowance - They will receive a company van (Renault Traffic) with a fuel card. Personal use is not included in this. Bonuses/commission (if any) and what are they for / how often is it paid - We do not pay bonuses/ commission, however we do pay overtime within the normally working day. For example if they had an 8hr boiler install and finished it in 5hrs they will get paid the full 8hrs and can take extra work and earn overtime, this can equate to 12/15 hours a day when they want to push for work. Mobile phone/tablet, uniform & PPE, tools - What's provided - They will be given a mobile phone, a Samsung tablet, full uniform including a full PPE kit such as gloves, boots, hard hat, ear defenders, safety glasses, hi vis etc. they will also be issued a van stock and plant such as 24v drills, Makita core drill, combi drill driver, multitool, transformer, treble ladders, telescopic ladders, wet and dry hoover, drill bits. They will be required to provide their own hand tools

An exciting new position has arisen within our company for a mobile Air conditioning Engineer to cover breakdowns, planned maintenance, installation & remedial works in the South of the country. we pride ourselves in offering the best service to existing and new clients which is provided through our high standards and excellent work force. We are looking for somebody with excellent communication skills, be able to complete paperwork to a good standard have pride in themselves and the works they carry out, can work alone or as part of a team and last but not least be punctual. Must F Gas 2079 17th Edition an advantage but not essential IOSH/health & safety training also an advantage Experience working on the following essential: AHU's Chillers AC cassette BMS systems. Further Opportunities to train in CO² In return we offer a good long term career with opportunity for progression within a fast growing company. Salary From To be discussed at interview {depending on experience} (Negotiable) We pay Door to Door £100.00 standby fee {which is on a rota basis} We provide: A vehicle Mobile phone Uniform If this is something that you are interested in please call Lorraine

MOBILE MECHANICAL / ELECTRICAL MAINTENANCE ENGINEER (Wembley) My client has been in the HVAC industry for over 40 years now. They specialise in commercial chillers, boilers and air conditioning. In the last 10 years, they have also moved with the industry into FM services. Some of the duties included are: To carry out planned maintenance within plant room areas Working on foot around Central London, The West End and The City of London Responding to reactive call outs and attending site to fix Mechanical duties: pump overhauls, valve and pipework repairs, cooling tower testing, vibration analysis, fixing leaks, HIU servicing, belt and pully alinement checks, fault finding, chiller and boiler checks, water treatment / temperature monitoring and constantly look for ways to reduce the overall cost of the production Electrical Duties: motor testing, BMS monitoring, meter checks, fault finding and constantly look for ways to reduce the overall cost of the production Servicing AHU's, FCU's, HIU's, chillers, pumps, invertors, cooling towers, adiabatic coolers, underfloor heating, pipework and a good working knowledge of all other M&E & HVAC Good understanding of L8/Legionella Be a good problem solver and ability to fault find and rectify Manage subcontractors and the company's other technical resources Oversee Health & Safety in line with our client's systems Develop quotations for additional works and repairs as requiredSkills & qualifications required: A time served mechanical / electrical apprenticeship City & Guilds or equivalent Electrical/Mechanical Engineering/Air Conditioning Confident work on with plastic fusion welded pipework, Press fit, screwed and soldered pipework and fittings Confident in carrying out pump overhauls including bearing changes, seal replacements NHC HND (desirable) Previous experience in the Building Services environment 6 years minimum IT literate and be comfortable working with an electronic works management system (CAFM) (essential) Be a good problem solver and ability to fault find and rectify Have good technical knowledge whilst also being able to be the face of the company and able to speak with clients when required What we can offer you: Work with great people, being part of a great team Challenge, exciting, part of a mission, being part of the journey, doing something that can make a difference in the world Opportunity to progress if you work hard Personal growth The Salary/Benefits: Up to £36,000 depending on experience Zones 1 + 2 + 3 Travel Card or Vehicle Contributory Company Pension Scheme Hours of work: 08:00 till 17:00 Monday to Friday Call out will become part for this role going forward but not for the first month. Some overtime maybe available but cannot be guaranteed

Senior BMS Service & Small Works Engineer £40-50k Permanent Primary works in London City. Mainly Trend, with some Siemens and Tridium works Our client a market leading BMS Controls Company seeks an experienced BMS Service Engineer to join their existing team in the London area, they are looking for a well established BMS Service Engineer who is looking at taking their next step, career wise. You will not only be doing service works, but also account management, dilapidation reports and surveys as well as some on site sales. This is a field-based service role with responsibility for the service, maintenance, fault-finding and occasional commissioning works on Trend, Tridium and Cylon BMS control systems. KEY RESPONSIBILITIES: To ensure that maintenance procedures are carried out to the standards detailed in the specific service schedules. To fault find on control systems and be able to rectify faults found, on field wiring, electrical panels, GUI's and various BMS controllers. To ensure all sites / systems meet the requirements of the customer / client, reporting directly to the Services Delivery Manager via a written report on any sites requiring further attention. To produce written reports that clearly detail works undertaken. As this is a client-facing role, you will have excellent communication skills and be able to present yourself in a professional and courteous manner at all times.This is a mobile role working mainly in the South West London/Surrey area however when required there may be UK wide travel. In return, you will receive a competitive salary along with an excellent benefits package. If you have any questions please get in touch via (url removed)

We are currently working with a leading Facilities Management provider to recruit a Hard Services Manager to manage to engineering teams on a large PFI portfolio in the Greenwich area Job Outline: To work as part of the FM team undertaking a range of duties and tasks supporting the direct operational activities of the Contract comprising but not limited to Direct Staff Costs, Consumable Asset Procurement, H&S Advice, Subcontracted Service Provision, and develop value for money utilisation of the fixed asset base Co-ordinate and develop the mobile engineering team Ensure delivery of hard FM Services in order to meet the Contractor's contractual Service Requirements and Contractor policies. Responsibilities include: Provide support for the Account Manager on all aspects of Hard FM Services and act as Deputy where required Act as a point of contact for Service users and attend meetings/presentations including school review meetings, SPC and Key Stakeholder meetings etc. as required maintaining good customer relationships. Liaison with School Business Managers and SPC (Imagile) to ensure an effective and cooperative working partnership Manage and monitor performance of Hard FM Services to contractual SLAs and KPIs, and ensure that H&S and technical audits are periodically carried out Daily monitoring of Concept system Open Task Report; ensuring all tasks logged in line with agreed protocols; liaise with Facilities Manager (SFM) and Site Managers to chase and close tasks within the required rectification times to minimise possibility of incurring performance penalties Compile a statutory maintenance and life safety system tracker(s) and report of progress of key maintenance activities Provide advice on contract interpretation and implementation Provide focal point for energy management for contract including management of the BMS systems Monitor budget against actuals for Hard FM Services, including but not limited to Direct Staff Costs, Consumable Asset Procurement, H&S Advice, and Sub-contracted Service Provision Ensure speedy resolution of damage, misuse and vandalism works informing Facilities Manager (Soft FM) to facilitate recharging applications. Produce monthly statistics and damage reports for monthly performance report Manage small work/ANC and ensure process is complied with and tracked. Assist with preparation of work schedules, costs and quotes for requested works. Manage invoicing applications through Commercial Admin Support and produce monthly statistics and variations reports for monthly performance report Appointed person in respect of the following but not limited to Fire Safety, Water Hygiene, Asbestos, and Lightning Protection, Working at Heights, F-Gas, Pressure Systems and LOLER. (Appointed in SHE Matrix)Essential Responsibilities: Technical competence within Facilities Management (Hard FM) Operational experience within Facilities Management (Hard FM) Working to service performance KPIs Working knowledge and experience in H&S legislation and compliance obligations Working knowledge and experience in Risk Assessments, Method Statements and Permit to Work procedures Contract interpretation, preferably PFI Line management experience Budget management Client-focused Excellent verbal and written communication skills Ability to work to deadlines, balancing different priorities and coping with fluctuating workloads IOSH Managing Safety Experience of CAFM system IT literacy in Microsoft suite Full driving licence with Category Part BE To hold relevant DBS clearance and to meet vetting procedures Anderselite Ltd operates as both an Employment Agency and Employment Business. Our non-discrimination policy can be viewed on our website at

We are currently working with a leading Facilities Management provider to recruit a Hard Services Manager to manage to engineering teams on a large PFI portfolio in the Oxford area Job Outline: To work as part of the FM team undertaking a range of duties and tasks supporting the direct operational activities of the Contract comprising but not limited to Direct Staff Costs, Consumable Asset Procurement, H&S Advice, Subcontracted Service Provision, and develop value for money utilisation of the fixed asset base Co-ordinate and develop the mobile engineering team Ensure delivery of hard FM Services in order to meet the Contractor's contractual Service Requirements and Contractor policies. Responsibilities include: Provide support for the Account Manager on all aspects of Hard FM Services and act as Deputy where required Act as a point of contact for Service users and attend meetings/presentations including school review meetings, SPC and Key Stakeholder meetings etc. as required maintaining good customer relationships. Liaison with School Business Managers and SPC (Imagile) to ensure an effective and cooperative working partnership Manage and monitor performance of Hard FM Services to contractual SLAs and KPIs, and ensure that H&S and technical audits are periodically carried out Daily monitoring of Concept system Open Task Report; ensuring all tasks logged in line with agreed protocols; liaise with Facilities Manager (SFM) and Site Managers to chase and close tasks within the required rectification times to minimise possibility of incurring performance penalties Compile a statutory maintenance and life safety system tracker(s) and report of progress of key maintenance activities Provide advice on contract interpretation and implementation Provide focal point for energy management for contract including management of the BMS systems Monitor budget against actuals for Hard FM Services, including but not limited to Direct Staff Costs, Consumable Asset Procurement, H&S Advice, and Sub-contracted Service Provision Ensure speedy resolution of damage, misuse and vandalism works informing Facilities Manager (Soft FM) to facilitate recharging applications. Produce monthly statistics and damage reports for monthly performance report Manage small work/ANC and ensure process is complied with and tracked. Assist with preparation of work schedules, costs and quotes for requested works. Manage invoicing applications through Commercial Admin Support and produce monthly statistics and variations reports for monthly performance report Appointed person in respect of the following but not limited to Fire Safety, Water Hygiene, Asbestos, and Lightning Protection, Working at Heights, F-Gas, Pressure Systems and LOLER. (Appointed in SHE Matrix)Essential Responsibilities: Technical competence within Facilities Management (Hard FM) Operational experience within Facilities Management (Hard FM) Working to service performance KPIs Working knowledge and experience in H&S legislation and compliance obligations Working knowledge and experience in Risk Assessments, Method Statements and Permit to Work procedures Contract interpretation, preferably PFI Line management experience Budget management Client-focused Excellent verbal and written communication skills Ability to work to deadlines, balancing different priorities and coping with fluctuating workloads IOSH Managing Safety Experience of CAFM system IT literacy in Microsoft suite Full driving licence with Category Part BE To hold relevant DBS clearance and to meet vetting procedures Anderselite Ltd operates as both an Employment Agency and Employment Business. Our non-discrimination policy can be viewed on our website at

BMS Service Engineer Up to £45k Mobile covering Central London and the South East Mainly Trend, with some Siemens and Tridium works Our client a market leading BMS Controls Company seeks an experienced BMS Service Engineer to join their existing team in North West England This is a field-based service role with responsibility for the service, maintenance, fault-finding and occasional commissioning works on Trend, Tridium and Cylon BMS control systems. KEY RESPONSIBILITIES: To ensure that maintenance procedures are carried out to the standards detailed in the specific service schedules. To fault find on control systems and be able to rectify faults found, on field wiring, electrical panels, GUI's and various BMS controllers. To ensure all sites / systems meet the requirements of the customer / client, reporting directly to the Services Delivery Manager via a written report on any sites requiring further attention. To produce written reports that clearly detail works undertaken. As this is a client-facing role, you will have excellent communication skills and be able to present yourself in a professional and courteous manner at all times.As a BMS Service Engineer you will be expected to be able to work on Trend Systems from commencement of their employment, training can and will be issued as and where required. This is a mobile role working mainly in the South West London/Surrey area however when required there may be UK wide travel. In return, you will receive a competitive salary along with an excellent benefits package. If you have any questions please get in touch via (url removed)