164 jobs found

A leading, established and highly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled Electrical Project Engineer from an M&E / Building Services electrical installation projects background. Those with M&E installations experience in commercial and or industrial environments are of serious interest as an Electrical Project Engineer or similar. We are looking to make an immediate appointment for an important ongoing project. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with direct working experience in the project delivery of electrical installations you would expect to find in commercial and industrial settings. Those with any hospital / healthcare buildings Electrical services installation are highly sought after; this is not essental for the role though. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is site based in Kettering to support the project requirements. You will become familiar with all the project details, design and specifications whilst collating technical submittals detailed by the Contracts / Project Manager and then manage this process liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinating drawings when requested. Candidates sought will have experience in advising and guiding sub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the electrical installations You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performing troubleshooting techniques to identify problems and apply corrective actions whilst managing document control to ensure all the logs are kept up to date. As a final, you will be skilled in creating handover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Electrical Engineering, Building Services or an Electrical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assured that you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad.

Job Title: HVAC Technical Manager Location: Leeds, West Yorkshire (Hybrid Working) Salary: 50,000 to 55,000 + Package (Listed Below) Company Pension Bonus Scheme Company Car or Car Allowance Office Free Parking Role Highlights: Working on large blue chip retail store frameworks Fantastic growth and progression opportunities Role Overview: As the Technical Manager , you will support the design and delivery teams in completing HVAC packages for major food retail accounts across the UK. The role will involve overseeing project scoping, system design validation, equipment selection and installation to ensure HVAC systems are technically compliant, energy efficient and delivered in line with client and project requirements. Key Requirements: HNC, HND or Degree in Mechanical Engineering / Building Services Engineering or HVAC related qualification CSCS Card Full UK Driving License (Able to Travel Nationwide) Strong knowledge of HVAC systems including VRF, heat pumps, AHUs and ventilation systems Experience completing or reviewing heating and cooling load calculations and system sizing Responsibilities: Manage mechanical contracts for retail & commercial fit-out projects, overseeing scope, budgets, timelines and compliance with client specifications. Perform or review heating and cooling load calculations, heat loss/gain and ventilation requirements to ensure accurate system sizing and performance. Lead early-stage project scoping including site surveys, capturing client requirements and defining suitable HVAC system strategies. Coordinate with project management, engineering and site teams to ensure smooth delivery of HVAC, refrigeration, plumbing and fire protection systems. Review and approve technical submissions including drawings, equipment schedules and specifications to ensure compliance with design intent and industry standards. Lead the negotiation and administration of subcontractor and supplier agreements, ensuring cost-effective and high-quality delivery. Monitor project progress, track costs against budgets and manage variations, implementing corrective actions to mitigate risks and maintain profitability. Oversee installation planning and sequencing to ensure systems are installed in accordance with design intent, manufacturer requirements and safety standards. Manage site teams, supervisors and subcontractors to maintain installation quality, productivity and compliance with RAMS and health & safety procedures. Provide contractual and technical guidance to project teams, resolving complex design or site challenges where required. Build and maintain strong relationships with clients, subcontractors and suppliers to support project delivery and long-term partnerships. Witness system commissioning and performance testing, ensuring installations meet design criteria, efficiency targets and client expectations. Identify potential risks and opportunities across mechanical works and support continuous improvement in HVAC design, installation and delivery processes. Contacts to Apply: Sam Hunter - Associate Director: (phone number removed) Cameron Lally - Senior Resourcer: (phone number removed)

Company Description Operating for over 45 years, King & Moffatt Building Services provide complete Mechanical and Electrical services across all sectors of the construction industry including Industrial, Logistics, Food, Pharmaceutical, Data Centre, Mining, Healthcare, Commercial, Hotel & Leisure, High-End Residential, Public, and Energy. From design stage to the installation and the ongoing maintenance of their facilities, our valued and highly skilled workforce provide our clients with an efficient, reliable and best in class service. A Deloitte Best Managed Company Award winner for eight years running, we pride ourselves on being a full building services solutions provider and have successfully delivered multiple large-scale projects in Ireland, the UK & mainland Europe. Job Description Due to the continued growth, we are now looking for a driven, Electrical Project Engineer in Kettering. This role reports to the site Electrical PM and will involve liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. Ensure all works are carried out and managed in accordance with the King & Moffatt Integrated Management System Manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports Input into weekly progress reports Manage, review and coordinate drawings, as requested Advise and guide the sub-contracted staff on all technical aspects of the project Raise any technical requests for information required to complete the electrical installations Ensure compliance with all site and project requirements, including operational health and safety obligations Apply troubleshooting techniques to identify problems and apply corrective actions Manage document control to ensure all logs are kept up to date Create handover packs and test packs for systems Qualifications Electrical Engineering / Building Services degree Experience of providing technical support to management & site installation teams desirable Self-motivated, excellent communication skills both written and verbal Fluent English Additional Information Having an inclusive and flexible culture helps the business continue to grow as a strong, dynamic and innovative organisation. As well as being supported and encouraged to develop your career here at King and Moffatt, we also offer the following: Competitive salary Professional Development support Employee Assistance Program Health and Wellness programs At King and Moffatt, we believe in the power of diversity and inclusion to drive innovation, creativity, and success. We are committed to creating a workplace where all employees feel welcomed, valued, and respected regardless of their race, ethnicity, gender, sexual orientation, age, religion, disability, or any other dimension of diversity. We strive to build a culture that celebrates differences, encourages open dialogue, and promotes equal opportunities for growth and advancement. By embracing diversity and fostering an inclusive environment, we not only strengthen our organisation but also enrich the lives of our employees and the communities we serve At King and Moffatt, we believe in the power of diversity and inclusion to drive innovation, creativity, and success. We are committed to creating a workplace where all employees feel welcomed, valued, and respected regardless of their race, ethnicity, gender, sexual orientation, age, religion, disability, or any other dimension of diversity. We strive to build a culture that celebrates differences, encourages open dialogue, and promotes equal opportunities for growth and advancement. By embracing diversity and fostering an inclusive environment, we not only strengthen our organisation but also enrich the lives of our employees and the communities we serve

Site Engineer Boldon Perm Competitive Salary + Car/Car Allowance + Flexible Benefits Summary We have an exciting new opportunity for an electrically biased Site Engineer to join our team based on a project in Teesside. In this role you will effectively manage and monitor the safety performance, resource deployment and productivity of all site based activities for projects or designated area of control. Providing accurate and concise information to project management, and ensuring all frontline workforce are engaged, informed and motivated. This is a permanent staff position with NG Bailey. What we're looking for : Drive all site activities to ensure that the safety first and foremost message is visible and alive throughout all activities relating to the project or designated area. Ensure all requisite duties are conducted in accordance with the supervisor responsibility matrix. Provide the workforce with optimum opportunity to perform at the highest level through effective use of planning, organisational and motivational skills. Ensure effective visibility of supervision from start of each shift and throughout the working day. Drive your project or area to maximise its productivity and profitability by carrying out duties contained within the supervisor responsibility matrix. Be a key member of the project leadership team, demonstrating gravitas and authority in the carrying out of your duties. Review the project scope of works, including installation methods, to ensure the precise provision of the customer's requirements, while maximising efficiency and profitability. Contribute to the production of/and lead delivery of the project programme, carrying out associated duties in accordance with the supervisor responsibility matrix. Working with the wider team, ensure effective management of programme and communication of progress and constraints. Understand the financial and commercial objectives within your area, ensuring that he delivery of engineering solutions is managed and installation is deployed in a way that achieves these objectives. Ensure that scope of packages is understood and that your work is managed accordingly. As required, provide accurate and timely information to project management Be accountable fort the effective management of all direct and indirect frontline workforce. Deploy a high level of engagement and communication to maximise team performance. Set clear expectations, cascade company messages, offer guidance and feedback. Identify and take responsibility for performance issues. Maintain regular dialogue and positive relationships with the project customer through the efficient delivery of project objectives. Maintain relationships with a view to optimising future opportunities and maximising site production. Be an ambassador for the company, representing them professionally at all times. Lead frontline workforce to the safe and successful completion and closure of work, within agreed timescales and meeting specification. Requirements: To be successful in this role you will have demonstrable building services experience in a construction environment, and previous experience in a similar role. Industry recognised trade or professional qualification Apprenticeship in electrical discipline Obtaining security clearance also may be a requirement, therefore all candidates must have been resident in the UK for a minimum of 5 years Specific experience of working on high value projects Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

Lead Mobile Engineer Location: Central London Salary: 50,000 + Company Van + overtime Contract: Monday - Friday: 8am - 5pm The Opportunity Are you a Senior Engineer or current Supervisor looking to take the next step in your career with a global leader in facilities management? We are seeking a Lead Mobile Engineer to lead a team of multi-skilled engineers across a high-profile regional portfolio. This role is designed for a technical expert who excels in "leading from the front," balancing hands-on technical support with high-level contract management and team development. You will be the primary technical authority for your region, ensuring that our commercial clients receive a seamless, compliant, and efficient maintenance service. The Role As a Mobile M&E Supervisor, you will oversee the delivery of building services maintenance across a diverse range of commercial assets. You will be responsible for the technical performance of your team and the commercial success of the regional contract. Key Responsibilities: Team Leadership: Manage and mentor a mobile team of Mechanical and Electrical engineers, providing technical guidance, conducting performance reviews, and identifying training needs. Service Delivery: Oversee the execution of Planned Preventative Maintenance (PPM) and reactive repairs, ensuring all works are completed within contractual KPIs and SLAs. Commercial Support: Identify opportunities for "extra works," providing technical specifications and accurate quotes to the client to drive portfolio growth. Compliance & Safety: Conduct regular site audits, review RAMS, and issue Permits to Work for high-risk activities. Ensure all site logbooks and CAFM records are audit-ready. Client Relationship Management: Act as the first point of escalation for the client, attending regular progress meetings and providing technical solutions to complex infrastructure challenges. Subcontractor Management: Procure and oversee specialist vendors, ensuring their work aligns with our safety standards and technical requirements. What We're Looking For We are looking for a professional who combines deep technical knowledge with strong commercial acumen and leadership skills. Technical Requirements: Qualifications: Minimum NVQ Level 3 (or equivalent) in an Mechanical or HVAC discipline. Experience: Proven experience in a supervisory or "Lead Engineer" capacity within a mobile commercial environment. Driving License: A full, clean UK driving license is essential. Professional Attributes: Leadership: The ability to motivate a remote team and manage workloads effectively across multiple locations. Commercial Mindset: Experience in quoting for works and managing small-to-medium M&E projects. Communication: Exceptional stakeholder management skills, with the ability to communicate technical issues to non-technical clients. Why Join the Team? This role offers the opportunity to lead a high-performing team on a prestigious contract with clear pathways into Contract Management. Company Van & Fuel Card provided. Professional Development: Access to industry-leading management training and technical upskilling. Comprehensive Benefits: Including a competitive pension, healthcare options, and performance-related bonuses. Work-Life Balance: Regionalised mobile working with a focus on efficient scheduling. If you are a technical leader ready to drive excellence across a regional portfolio, apply today. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Surveyor North East RegionPermanentUp to £35k + Company Commercial Vehicle + Flexible Benefits Freedom's Network Services team has an exciting opportunity for a Surveyor to work on our long-term contract with Northern Powergrid (NPg), delivering Cable Engineering Services across the NPg network. This is a field-based role reporting to a Supervisor, with a commercial vehicle provided. Some of the key deliverables in this role will include: Completing full surveys of services and properties to bring infrastructure to current standards. Carrying out pre-works risk assessments and recording asset conditions. Assessing current network running conditions and providing solutions. Annotating maps and planning refurbishment works to client standards. Liaising with landowners and customers to confirm agreements and resolve access issues. Recording survey details and uploading evidence via handheld tablet devices. What we're looking for: Full UK driving licence. Strong understanding of LV DNO networks and ability to interpret plans. Excellent customer service skills and flexibility. Practical experience working in and around customer properties (desirable). First Aid at Work (desirable). Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contribution 25 days Annual Leave + Bank Holidays Salary sacrifice car scheme (Hybrid/Electric Vehicle) Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us:Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

Location: Richmond Upon Thames About the Role: As a CBRE Fabric Technician, you will be responsible for proactive and reactive building maintenance and repair services for a major global technology client contract. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You'll Do: Support clients in an efficient and courteous manner, with a strong focus on customer care. Perform ongoing preventive maintenance and repairs on facilities. Assist with the installation and modification of building equipment and systems. Inspect new or existing installations for compliance with building codes and safety regulations. Assist engineering staff in a wide range of duties as required. Respond to common inquiries or complaints from clients, co-workers, and supervisors. Take measures to ensure that all systems are operating in the most efficient manner. Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion. Impact through clearly defined duties, methods, and tasks are described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance. What You'll Need: Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. Ability to follow basic work routines and standards in the application of work. Communication skills to exchange straightforward information. Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc. Strong organizational skills with an inquisitive mindset. Why CBRE When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. Applicant AI Use Disclosure We value human interaction to understand each candidate's unique experience, skills and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process.

1st Step Solutions are supporting a building services engineering company who have an opportunity for a Health & Safety Manager based in Grays, Essex. (with site visits as required) Our client delivers Mechanical, Electrical & Plumbing solutions across commercial, industrial and residential sectors. Job Overview Responsible for leading and managing all aspects of health, safety, and environmental compliance across operations. This role ensures that all projects, sites, and offices operate safely, legally, and in line with company standards. Key Responsibilities Develop, implement, and maintain the company Health & Safety strategy and policies. Ensure compliance with all relevant legislation, codes of practice, and industry standards. Lead H&S planning and risk assessments for projects. Conduct site inspections, audits, and HSE reviews. Provide guidance and support to project managers, site managers, and supervisors. Monitor contractor and subcontractor compliance with H&S standards. Identify training needs and deliver H&S training programmes for employees and subcontractors. Maintain records of training, qualifications, and certifications (e.g., CSCS, PASMA, IPAF). Promote a proactive health and safety culture across the business. Ensure risk assessments, method statements (RAMS), and safe systems of work are in place. Maintain compliance with ISO 45001, CDM Regulations, and company H&S procedures. Prepare H&S reports for management meetings and regulatory bodies. Monitor HSE performance KPIs and drive improvements. Skills & Experience Required Proven experience as a H&S Manager or Senior H&S professional within construction or building services. Strong knowledge of UK construction H&S legislation, including CDM Regulations, HSE guidelines, and ISO 45001. Experience conducting audits, inspections, and accident investigations. Excellent communication and interpersonal skills. Strong organisational skills with the ability to manage multiple sites and priorities. Experience in MEP, mechanical, electrical, or building services projects. Desirable NEBOSH National / Diploma or equivalent qualification. Experience in implementing and maintaining H&S management systems (ISO 45001). IOSH Managing Safely certification. Qualifications NEBOSH National Certificate or Diploma (required). IOSH Managing Safely (desirable). Degree or HNC/HND in occupational health & safety, construction management, or relevant discipline is advantageous. CSCS card (or willingness to obtain). Full package available

Role: Radiography Coordinator Position: Contract Location: Hinkley Point C, Somerset Days on Site: 5 (shift work involved) Duration: Ongoing contract Pay: Up to 371.62 (paye) to 505.10 (umbrealla) The Role The Radiography Coordinator ensures the smooth running of the onsite functioning of the Radiography Support Team's or third-party radiography resource and any other NNB Radiography coordination resource. The requirements for radiography will be identified within the contractor's workscope by Engineering standards both NNB and international. Contractors shall justify and agree the NDT technique and amount of on-site NDT, then request Radiography through the Radiography Coordinator. The Radiography Coordinator will check the adequacy of planning and preparations and will confirm adequate safe operation between Tier 1 Contractors considering the areas concerned, shift patterns and clearing of areas of personnel prior to radiography taking place in accordance with the HSE guidelines and Company Standards. They will ensure work is adequately planned, coordinated, prepared, and risks managed for the work to proceed safely, to time and quality by the Contractor. The Radiography Coordinator will take an overview of radiography performance in delivering the Construction Plan for radiography across HPC site and have a broad understanding of all the radiography work being undertaken. Ensuring potential clashes are avoided and optimising the strategy so that all radiography is delivered safely and with the required quality. The Radiography Coordinator will run coordination meetings and minutes and interface with other construction meetings, anticipating future risk and issues and be proactive in managing them. They will also need to play a pro-active role in the broader HPC Delivery team. Principal Accountabilities The Radiography Coordinator shall be responsible for the safe & compliant delivery of radiography coordination via the interfaces between radiography service providers and installation contractors in a timely manner, taking into consideration any time/safety constraints or other requirements prior to radiography taking place. They shall drive current and future performance, ensure an open learning environment leads to continuous improvement and delivery to safety, quality, time and cost constraints. The Radiography Coordinator shall manage the storage of radiographic film after interpretation or until delivered to storage as lifetime quality records, as well as developing NNB's strategy related to the digitisation of radiographs for key components. The Radiographic Coordinator will also champion non-radiological testing technologies as a means of ensuring ALARP in meeting nuclear safety requirements. When new and innovative techniques are proposed, the Radiographic Coordinator will liaise with the Radiography Subject Matter Expert and NNB RPA body, to ensure that ALARP justifications have been produced by the contractors and approved by NNB prior to the specific work starting. They must spend time on the construction site monitoring the safety of work activities and ensure work is delivered as planned, providing key input into Radiographers barrier plans. They must also be able to apply KPIs to monitor radiography performance issues, trends, and risks. Knowledge, Skills, Qualifications & Experience Knowledge & Skills: Excellent communication skills with the ability to develop wide network and working relationships within NNB and the construction industry. Results focus tempered with team centred approach, with excellent planning, organisation and anticipation skills. Highly skilled in the analysis of technically demanding and detailed information and able to quickly identify the underlying issues and risks. Strong capacity to be future focused in identifying risks and implications. Strong communication skills to be able to put across complex concepts and data in a way that is readily understood and actionable, using a variety of media. Skilful in engaging others with technical issues and maintaining their interest and enthusiasm. Skilful in distilling knowledge and building skills in others and the capacity to be pragmatic and practical in the way that technical issues are addressed. Good knowledge of large organisational, process plant and site, operations with nuclear standards. Good knowledge of the radiography industry including an understanding of the different technologies available on the market including their benefits and limitations. Ability to strongly deliver and enthuse others to deliver in line with written standards. Excellent knowledge of national and international HSE standards. Excellent knowledge of CDM Regulations 2015/ IRR2017 and Nuclear Site Licence requirements. Proven track record of achieving excellent safety results on major engineering and construction projects. Qualifications and Experience: PCN or equivalent ISO 9712/ASME level 2 radiographer, current preferred but lapsed qualifications accepted. Previously trained and appointed as Radiation Protection Supervisor (RPS) minimum. Experience working on large construction/refit projects with significant levels of open site radiography and use of barrier plans. Good knowledge of other non-destructive testing techniques/standards, additional qualifications such as ultrasonics and/or surface inspection are an advantage. Knowledge and experience from working in the nuclear sector. Good knowledge of the IRR2017. Experience of working closely, supporting a team to achieve excellent delivery. Are you ready to be part of a project that's reshaping the energy landscape of the UK? This is your opportunity to make a significant impact on the construction of Hinkley Point C. If you have the skills and experience to lead this challenging endeavour, we want to hear from you. What's in It for You Be Part of History : Work on the UK's first new nuclear power station in a generation. Scale & Impact : Over 22,000 workers contributing to a 36 billion project that supports 70,000+ UK jobs. Net Zero Future : Contribute to a project essential to Britain's low-carbon energy transformation. Career Development : Work in a multi-disciplinary environment with exposure to high-level planning and world-class logistics operations. Application Information: If this sounds of interest, please APPLY NOW with your CV and a cover letter highlighting your suitability for this exciting role. Good Luck! This vacancy is being advertised by Rullion Ltd acting as an employment business. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base, from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Thanks Rullion Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants.

We are seeking an experienced Senior Electrical Project Engineer to support delivery of highways tunnelling project located in Plymouth. Your main responsibility is to assist the Delivery Manager with the delivery of one of either three packages of work (Electrical, Mechanical and Telecoms). This will involve working with the Delivery Manager, project team, designers, main contractor and installation contractors to safely deliver the project, on time, to stated quality, at minimum cost and to client satisfaction. Projects rely on accurate technical delivery. Gaps between design and installation can lead to delays, rework, and performance issues. A capable Engineer helps ensure systems are delivered correctly, supporting smooth commissioning, reliable operation, and long-term building performance. This is a contract role for a minimum of three/four months, working within a highways environment. The successful candidate will be responsible for managing and coordinating electrical works packages, ensuring compliance with safety, quality, and programme requirements. The role will be primarily day works; however, flexibility is required to undertake night shifts where necessary to coordinate with site teams and station access constraints. Key Responsibilities Manage and coordinate electrical remedial works packages on site Interface with site supervisors, subcontractors, and client representatives Ensure works are delivered in accordance with Network Rail standards and project specifications Oversee installation, testing, and commissioning activities Review and approve RAMS and technical documentation Monitor programme, progress, and quality of works Ensure compliance with H&S and rail safety requirements in a live station environment Provide technical support and resolve site-based engineering issues Scope of Works / Systems The remedial scope will include: LV Distribution systems Central Monitoring Systems (CMS) Uninterruptible Power Supplies (UPS) Lighting systems Variable Speed Drive (VSD) replacement and repair Small power installations Requirements Essential: Previous experience delivering electrical works within a Network Rail station environment Strong understanding of rail standards and working within live operational sites Valid Sentinel Card Valid ECS Card HNC (or higher) in Electrical Engineering Proven experience managing subcontractors and site teams Ability to work occasional night shifts as required Desirable: Experience delivering remedial or upgrade works within existing rail infrastructure Testing & commissioning knowledge across LV and building services systems

Engineering Supervisor - Electrical Bias Harwell - Oxfordshire Competitive salary + Van and Benefits On call 1 in 4 - 100 standby fee Brief Engineering Supervisor needed for a well know, large Facilities Management organisation based in Harwell who are looking to employ an experienced and well-rounded Engineering Supervisor that is Electrical bias that takes pride in their work. The successful candidate must hold their 18th Editon, Electrical C&G or equivalent in a relevant engineering discipline and if you have your 2391 ticket then that will be a bonus! The role available is 50/50 on the tools and supervising a team of 6 engineers, therefore if you have some management experience then that will be a bonus! Benefits 25 day's holidays Company use van Pension Plan Career Progression What the role entails: Some of the main duties of the Engineering Supervisor will include: The successful candidate will have the ability to manage the site's engineer team and ensure PPM targets are met on a daily, weekly and monthly basis The site remains statutory complaint and critical infrastructure remains operational The ability to fault find, diagnose and rectify maintenance faults Respond in a timely manner to verbal and written requests Review Engineering Job Sheets in timely manner for accuracy, legibility & remedial works Ensure all PPM is carried out in accordance with the customer maintenance specifications and job plans. Ensure task movement, log notes (Including documented updates) occur in real time using the provided IT to log start/wait/stop completion and travel times, with appropriate comments to evidence completion of work Ensure all engineers PPE is up to date and safe Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance Ability to manage both customer and team expectations What experience you need to be the successful Engineering Supervisor : Electrical C&G or equivalent in a relevant engineering discipline Electrical inspection 2391 required (Desirable) BSth Edition Ability to read electrical drawings (Desirable) Mechanical qualification (Desirable) Experience in managing engineering team Experience of pharmaceutical or process environments (Desirable) Experience buildings services M&E 5 years post qualification experience This really is a fantastic opportunity for a Engineering Supervisor to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Murphy is recruiting for a title to work with the Energy team, initially based at Stonecross ( WA3 3JD) Jan- June, then onsite 5 days a week at Glaslyn on the Great Grid Upgrade, to reinforce and refubish parts of the high power network in North Wales. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Managing Quantity Surveyor Efficiently manage all commercial aspects of the Project and maintain regular liaison with all stakeholders. Assist in building a team, manage the development of personal plans, establishment of objectives/targets for all direct reports and monitor on an ongoing basis - maintain performance. Collate, analysis & challenge Cost/Value Reports and forecasts as required, implement required actions. Negotiating terms and conditions with subcontractors and suppliers that apportion risk to those best placed to manage that risk and deliver best value to the project and the Client Design and implement a commercial strategy for their portfolio and tenders with the assistance of their functional manager. Assist with the development and training of Commercial Practitioners including supervisor / mentor / counsellor role for staff undertaking their APC or equivalent. Assist in maximising of cash position, including WIP control, cash flow production & improvement plans for all projects. Identification and advice upon of insurance related issues, including PI. Assist in work winning duties as required, including proactive release of team members and attendance at Client Presentations for Tender Interviews Ensuring optimum performance of commercial team for the portfolio of work, undertaking constant reviewing for margin gains in efficiency and timely resource forecasting. Ensure that the outturn costs on the projects are monitored monthly through a detailed bottom up resourced and costed forecast maintained. Still interested, does this sound like you? Chartered Quantity Surveyor (MRICS) or equivalent preferred. Registered with RICS / ICES Excellent knowledge of Standard Forms of Contract (NEC) and Standard Methods of Measurement Capable of confident, informed, quality decision making Ability to synthesise information quickly and communicate situation reports to senior management

Freelance Project Manager Data Centre Location: Slough Contract Type: Freelance / Outside IR35 (subject to assessment) Project: New-Build Data Centre (M&E Delivery) Duration: 12 months (with potential extension) Reporting to: Senior Project Manager / Operations Manager Overview TXM recuit are seeking an experienced Freelance Project Manager to support the delivery of a major new-build mission-critical data centre project in Slough for a sub contractor. The role is focused on managing Mechanical & Electrical packages, coordinating site activities, and ensuring the project is delivered safely, efficiently and to the required technical standards. This is a fast-paced, high-value engineering environment requiring strong leadership, technical capability, and excellent stakeholder communication. The ideal candidate will have a proven track record delivering M&E packages on hyperscale or enterprise data centre projects. Key Responsibilities Oversee day-to-day management of M&E works on a live data centre construction site. Drive project programme, sequencing and short-term planning to meet critical milestones. Manage coordination between Mechanical & electrical contactors. Work closely with design teams to review drawings, resolve issues and manage design changes. Ensure all installations meet the companys and client technical standards, specifications and QA requirements. Lead the commissioning and integrated systems testing (IST) process alongside specialist teams. Manage subcontractors, supervisors and site teams to ensure efficient and safe site operations. Chair site coordination meetings and progress reviews. Ensure installation works are properly resourced and materials are available in line with programme. Proactively identify and resolve on-site issues, clashes or delays. Review RAMS, permits and H&S documentation. Ensure compliance with CDM regulations, statutory requirements and project protocols. Skills & Experience Required Proven experience delivering M&E projects for main contractors or specialist building services contractors . Previous data centre experience is essential (hyperscale preferred). Strong technical understanding of electrical distribution, cooling systems, UPS, generators, containment and critical infrastructure. Experience working with mission-critical commissioning processes (e.g. IST Levels 1 5). Excellent organisational and programme management skills. Demonstrated ability to lead teams in a high-pressure, fast-track environment. Strong communication, reporting and stakeholder management abilities. Self-motivated, proactive and capable of operating with minimal supervision. Qualifications HNC/HND or degree in Mechanical, Electrical or Building Services Engineering (preferred). SMSTS or equivalent safety qualification. CSCS Manager card. First Aid at work Commissioning or mission-critical certification (desirable). if you ae intersted in this role and would like more information please call chris on (phone number removed) or Click apply.

This is an exciting opportunity to join a long established building services company based in Wiltshire. The firm is currently seeking a Building Services Assistant Manager with an electrical focus or an Electrcial Supervisor looking to support the management and delivery of small works diverse commercial, industrial & residential projects. The successful candidate will work Monday to Friday, playing a pivotal role in ensuring technical excellence, project profitability, and exceptional customer service. Benefits Salary: £50,000 Hours: 7.30am to 5.00pm Monday to Friday (1/2 hour break) Company van Company mobile and laptop 25 days holiday plus Bank Holidays Pension enrolment after 3 months service Long Service Awards Death in Service Benefit Discounted Cycle and Tech Scheme The Role The Building Services Assistant Manager will support the Building Services Manager in overseeing the full lifecycle of electrical projects, from initial design to final commissioning. Key responsibilities include: Project Leadership: Leading the delivery of electrical installations, managing timelines, resources, and budgets effectively. Technical Guidance: Providing expert support to engineers and resolving complex technical issues promptly. Compliance & Quality: Ensuring all works meet current electrical regulations and health and safety standards. NICEIC Oversight: Supporting the authorization of documentation and ensuring results of inspections and testing are recorded accurately. Commercial Support: Conducting site surveys, preparing estimates, and negotiating with suppliers and subcontractors. Operational Management: Supervising on-site teams and assisting in the financial control of the Electrical Small Works department. Candidate Profile The client is looking for a collaborative team player with a proven track record of delivering high-quality results within specified timelines. Essential Qualifications & Experience: IEE Regulations: Ideally 18th Edition. Testing & Inspection: City & Guilds 2391 qualification. Industry Tenure: A minimum of 10 years of experience within the building services sector is preferred. Background: Extensive experience in small works, maintenance, and electrical contracting. Licensing: A full UK driver s licence is required. Preferred Attributes: NICEIC Qualifying Supervisor status (highly desirable). IOSH qualification in Health and Safety. Previous management experience and a high level of IT literacy. Strong communication skills, capable of liaising confidently with both domestic and commercial clients. If interested please APPLY or please call me James Grant at Hampshire Recruitment Group.

We are currently seeking an experienced Mechanical Supervisor to join a residential development project for a reputable M&E contractor. The successful candidate will have a strong background supervising mechanical building services works on new-build and refurbishment residential schemes, ideally within multi-unit housing or apartment developments. Key Responsibilities Supervise and coordinate all mechanical installation works on site Manage subcontractors and direct labour across mechanical packages Ensure works are delivered safely, on time, and to specification Monitor quality, progress, and compliance with drawings and standards Conduct toolbox talks, site inductions, and safety briefings Liaise with project management, engineers, client representatives, and other trades Coordinate works within occupied or phased handover residential environments where applicable Ensure adherence to health & safety regulations and site procedures Assist with inspections, snagging, testing, commissioning, and handover documentation Requirements Proven experience as a Mechanical Supervisor on residential new-build or refurbishment projects Experience working on multi-unit developments, apartments, or housing schemes Strong knowledge of residential mechanical systems (HIUs, boosted cold water, domestic hot & cold water services, soil & waste, MVHR, ventilation, LTHW systems) Ability to read and interpret mechanical drawings and specifications Excellent leadership and communication skills Strong focus on health & safety and quality control Relevant mechanical qualification (NVQ / City & Guilds or equivalent) SSSTS or SMSTS (required) CSCS card (Supervisor or Gold Card preferred) To Apply Please submit your CV for the Mechanical Supervisor role.

Junior Mechanical Project Manager / Mechanical Site Manager Building Services £47,000 £55,000 + Benefits This is a fantastic opportunity for an ambitious Junior Mechanical Project Manager to join a long-established and highly respected M&E Building Services contractor delivering commercial mechanical projects across education, healthcare, commercial refurbishment, fit-out, and specialist sectors. Projects typically range from £100k to £2m and include full mechanical building services installations such as HVAC systems, plant rooms, pipework, public health services, and associated M&E services. The business has built long-standing client relationships and an excellent reputation for delivering high-quality Mechanical Building Services installations across complex commercial environments. Why Join the Business The company offers a supportive and collaborative working environment where developing Project Managers are trusted to take increasing ownership of their projects while receiving guidance from experienced senior leadership. With a strong pipeline of secured work and long-standing client relationships, this is an excellent opportunity to join a stable and well-respected contractor offering genuine career progression into a fully-fledged Mechanical Project Manager role. The Role Junior Mechanical Project Manager As Junior Mechanical Project Manager, you will support the delivery of Mechanical Building Services projects from pre-construction through to completion and handover. Working alongside experienced Senior Mechanical Project Managers and Directors, you will gain exposure to the full project lifecycle across commercial M&E installations. Responsibilities will include: Supporting the delivery of Mechanical Building Services projects Assisting with management of HVAC systems, pipework, plant rooms and associated services Supporting programme management and reporting Procurement of plant, materials and subcontract packages Subcontractor coordination and site supervision Attending client and site meetings Ensuring Health & Safety compliance across projects Supporting commercial awareness and cost control This Junior Mechanical Project Manager role would also suit a Mechanical Site Manager, Mechanical Site Supervisor, or experienced Mechanical Engineer looking to progress into a Project Management role within an established M&E contractor. Requirements To be considered for this Junior Mechanical Project Manager position, you should have: Strong Mechanical Building Services site experience Background as a Mechanical Site Manager or Mechanical Supervisor Experience delivering commercial M&E projects Good understanding of HVAC systems and mechanical installations Strong organisational and communication skills Desire to progress into Mechanical Project Management Remuneration Package Junior Mechanical Project Manager £47,000 £55,000 Pension Company bonus scheme 22 Days Holiday + Bank Holidays (increasing with length of service) Genuine career progression opportunities Next Steps Please apply online today, or contact Rob at David Leslie Ltd for an informal and confidential discussion. This role would suit candidates currently working as: Mechanical Site Manager, Mechanical Supervisor, Mechanical Project Engineer, Mechanical Building Services Engineer, Assistant Mechanical Project Manager. About David Leslie Ltd David Leslie Ltd is a family-run construction recruitment consultancy with over 20 years experience connecting professionals and employers across the UK. Specialising in the Building, Fit-Out, and M&E Building Services sectors, our approach is built on trust, integrity, and long-term partnerships, ensuring both clients and candidates receive a service that is personal, transparent, and expertly delivered.

Your role at a glance As the Building Services Engineering Apprentice , you will be part of the LON1 Operations team, reporting to the Data Center Manager. This is an exciting opportunity to grow your career in the dynamic Data Center industry. You will gain hands on experience and knowledge of data center best practice including hardware management, installations, implementation, support and monitoring. This role will have 80% on the job training and 20% college attendance at a local college enabling the attainment of a recognized qualification. Key Responsibilities: Review designs and installation controls for heating and ventilation systems and understand how to operate and control Review plans using CAD and building information modelling software to optimize and refine design proposals, working to agreed quality standards, project programme and budget, within legal, contractual and statutory requirements Ensure jobs meet building regulations, health and safety requirements, assessing and controlling risk, working with health, safety and welfare legislation and best practice Coordinate the work of technicians and craftspeople and support with commissioning, organizing and assessing the work of contractors Assess the life cycle of buildings and their component services to minimize resources consumed and the impact on the environment to promote continuous improvement by using market intelligence and best practice Use a sound, evidence-based approach to problem solving to develop building services engineering design solutions which maintain and enhance the quality of the environment and community and meet client, financial and safety objectives Focus on sustainability including the dynamic thermal performance of buildings, energy resources, combined heat and power, wind power generation and lighting and electrical systems Assist with installation and maintenance work through overseeing and specifying maintenance and operating procedures Estimate costs, present ideas and produce progress reports, as well as manage budgets by forecasting spending and ensuring work is kept to budget Your Profile: Interest in the data center environment, and specifically either IT, network, security or mechanical and/or electrical engineering Good communication skills and ability to work well as part of a team (internally and externally) Computer literacy, comfortable with MS Office 365 Enthusiastic, eager to learn, proactive, strong sense of ownership, determined and flexible to adapt to a dynamic environment and demand from the client or supervisor Proven ability to navigate and learn quickly in ambiguity A Level BBC - Must include Mathematics and preferably a Science in either Chemistry or Physics (UCAS points: 112) T-level (Merit or above) in Construction: Design, Surveying and Planning. (UCAS points: 120) BTEC Level 3 Extended Diploma DDM in an Engineering subject area, with a minimum of merit in Mathematics and Further Mathematics. (UCAS points: 128) BTEC Level 3 National Diploma D D in an Engineering subject area, with a minimum of merit in Mathematics and Further Mathematics. (UCAS points: 112) Building Services Engineering Technician level 3 apprenticeship DD (UCAS points: 96) alongside grade Pass or Distinction at EPA, please get in contact with the LSBU Apprenticeships for Apprenticeships Routes Applicants must hold 5 GCSEs A-C including Maths and English or equivalent (reformed GCSEs grade 4 or above) To undergo full security checks to BS7858:2019 standard Further Details: Location: LON1 in Dagenham. Education level: Bachelor level Positions available: 1 Start date: 1st September 2026 Duration of the apprenticeship: 78 months (6 years and 6 months) Working week: Monday Friday, 42.5 hours per week / One day at London South Bank University At least 18 years by September 2026 of age After Successful Completion of Your Apprenticeship: Your knowledge should encompass: First principles relating to the operation and maintenance of appropriate plant and equipment Relevant industry health and safety standards, regulations, and environmental and regulatory requirements Maintenance and operational practices, processes and procedures covering a range of plant and equipment The relevant engineering theories and principles related to the occupation Who we are As the third largest data center provider, we operate over 150 data centers in more than 20 countries and regions. We understand that every business large and small has its own unique needs and goals. We offer local-to-global data center expertise, aligned with our connected platform of AI-ready data centers to create solutions that enable our clients to seamlessly scale their digital businesses, anywhere and anytime.

Axis, part of Axis CLC, is a trusted property services specialist delivering responsive repairs, planned works, refurbishments and compliance services across social housing and public sector environments. We employ more than 1,500 people and support over 250 clients across London and the South East, helping keep residents safe and properties fully compliant. We are recruiting for an experienced Mechanical Site Manager to support delivery across our social housing programmes in Southampton and the surrounding areas. The Mechanical Site Manager will be responsible for coordinating and managing the installation of heating systems across occupied and void social housing properties. This includes radiator replacements, heating pipework alterations, Heat Interface Unit (HIU) installations and associated electrical rewire activities. Working closely with an Electrical Supervisor and Resident Liaison Officer (RLO), you will oversee site operations, ensuring works are delivered safely, to specification and with minimal disruption to residents. This role requires strong technical knowledge, excellent stakeholder management and the ability to maintain high standards of quality, compliance and customer service. What You ll Do As a Mechanical Site Manager, your responsibilities will include: Managing day-to-day site activities across multiple occupied and void properties. Supervising mechanical and electrical operatives, subcontractors and specialist teams. Planning and coordinating radiator replacements, heating pipework alterations, HIU installations and associated electrical works. Monitoring progress against programme and addressing risks or delays. Ensuring all works comply with mechanical design specifications, manufacturer requirements and relevant Building Regulations. Conducting quality inspections and approving commissioning documentation and certification. Enforcing Health & Safety standards, including RAMS briefings, toolbox talks and site safety inspections. Working closely with Resident Liaison Officers to coordinate property access and minimise disruption to tenants. Attending client meetings and providing clear updates on site progress and performance. Maintaining accurate documentation including site diaries, installation records and commissioning documentation. About You To succeed as a Mechanical Site Manager, you will demonstrate: Proven experience managing mechanical installation works within social housing environments. SSSTS or SMSTS certification. Strong knowledge of radiator systems, HIUs, heating pipework and domestic plumbing systems. Experience overseeing electrical rewires at supervisory level. Experience working in occupied properties with strong awareness of resident care and safeguarding. Ability to read mechanical and electrical drawings and specifications. Strong leadership, communication and organisational skills. Good IT literacy, including digital job management systems and reporting tools. Desirable Mechanical engineering qualification (NVQ Level 3, HNC or equivalent). Experience installing or commissioning HIU systems. Asbestos Awareness certification. First Aid at Work. Experience working on energy efficiency or district heating programmes. What We Offer Salary up to £55,000 plus: Company vehicle and fuel card (business use) Pension scheme and life assurance 25 days holiday + bank holidays Opportunities for development and progression across Axis CLC Why Axis CLC Joining Axis CLC means being part of a national organisation delivering essential services across housing, education, healthcare, defence and commercial property. We value reliability, quality and social impact, offering long-term stability and genuine opportunities to grow your career. Our Commitment to Inclusion Many faces, one Axis CLC. We value diversity and are proud to be an equal-opportunity employer. If you require any adjustments during the hiring process, please let us know.

CLC, part of Axis CLC, is a national maintenance and refurbishment provider with over 1,000 employees and 13 UK offices. We support clients across the healthcare, defence, leisure, heritage, commercial and education sectors, delivering essential building services. As part of the Axis CLC group, backed by over 110 years of combined experience across the organisation, we offer responsive repairs, planned maintenance, compliance, decarbonisation and refurbishment solutions nationwide. The Role CLC is seeking an experienced and proactive Response Manager to support and lead our responsive works delivery across Catterick and surrounding areas. This key role will support the FDIS RAMS contract, ensuring safe, efficient and high?quality service delivery while maintaining strong relationships with our client and operational teams. Responsibilities Lead and coordinate responsive maintenance work to meet KPI and contractual requirements. Work closely with engineers, supervisors and the Contract Manager to allocate resources effectively. Ensure full compliance with Health & Safety legislation, policies and RAMS documentation. Carry out site inspections, audits and safety checks to maintain high standards. Monitor performance, generate reports and identify continuous?improvement opportunities. Build and maintain positive relationships with client representatives, attending regular meetings. Provide leadership, guidance and support to engineering teams, including performance management. Oversee job costing, variations and commercial documentation in line with contract requirements About You Experience managing responsive repairs or maintenance works. Strong understanding of Health & Safety compliance. Excellent organisational and planning skills. Ability to build strong relationships with clients and internal teams. Leadership experience with the ability to support and motivate teams. Effective communication and problem?solving skills. Knowledge of FDIS or defence?sector maintenance contracts. Technical background in engineering or building maintenance. IOSH/NEBOSH/SMSTS qualification (or equivalent). Proactive and solution?focused. Calm under pressure and adaptable. Strong customer?service mindset. Detail?driven with high standards of delivery. What We Offer A competitive salary package Company vehicle + fuel card (business use) Pension scheme and life assurance days holiday + bank holidays Perkbox (discounts, perks & wellbeing offers) 1 paid volunteer day £2000 refer-a-friend bonus after the referee passes probation Opportunities for development and progression across Axis CLC Why Axis CLC Joining Axis CLC means being part of a national team delivering essential services across housing, education, healthcare, defence and commercial property. We value insight, quality and evidence-based decision-making, and offer roles where your work directly influences business performance and long-term growth. Our Commitment to Inclusion Many faces, one Axis CLC. We value diversity and are proud to be an equal-opportunity employer. If you require any adjustments during the hiring process, please let us know.

Multiskilled Technician Location: Central Bristol Salary: £40,000-£42,000 Hours: Monday-Friday About the Employer A leading global workplace and real-estate solutions provider delivering best-in-class FM services. You ll join a high-performing team known for technical excellence, innovation, and exceptional customer experience. The Role We are seeking a fully qualified Multiskilled Technician to deliver reactive and planned maintenance across building engineering services. Supporting the Technical Supervisor and Workplace Experience Manager, you ll ensure the site operates safely, efficiently, and to the highest standards. This is a dual mechanical & electrical role requiring BSth Edition competency and good mechanical/plumbing skills. Key Responsibilities Deliver planned and reactive maintenance across electrical, mechanical, plumbing and building fabric disciplines. Ensure compliance with H&S, environmental, quality and COSHH requirements; complete all necessary risk assessments. Fault find, diagnose and repair using technical drawings and manufacturer manuals. Complete electrical works including maintenance, testing and installation. Support small works projects and assist with snagging and handovers. Undertake the role of Authorised Person (AP) for Control of Works. Maintain accurate records, logbooks, and IFM system updates. Liaise with the Helpdesk to ensure timely responses to PPM and reactive tasks. Monitor subcontractor performance and ensure high standards of service delivery. Conduct daily building walks to ensure compliance, safety and presentation standards. Maintain stock levels and ensure test equipment is calibrated. Support junior/less experienced team members including apprentices. Person Specification Prior experience in facilities maintenance within a commercial environment. Apprentice-trained engineer or equivalent. BSth Edition (essential). Strong understanding of Health & Safety legislation. Excellent communication, customer service and attention to detail. Ability to prioritise, multitask and work effectively in a high-pressure environment. Confident in handling conflict, crisis situations and building stakeholder relationships. A proactive mindset with a passion for continuous improvement. Team-focused, reliable, discreet, and committed to delivering outstanding service. If this role is of interest, please apply or reach out to Ryan Guy on (url removed) or (phone number removed).