113 jobs found

Job Title: Clean Room Validation / Commissioning Engineer Location: Wigan, Greater Manchester Salary/Benefits: 26k - 50k + Training & Benefits A leading name within the Critical Air / Clean Air industry is recruiting in the North West of England for a switched-on and mechanically-minded Clean Room Validation / Commissioning Engineer. They are seeking someone with an established skillset and proven track record within the industry, as you will be expected to hit the ground running. The role will involve work across pharmaceautical and medical environments, so prior experience within these settings is essential. You will be joining a privately-owned outfit, who have been operating within the industry for over 20 years. Salaries on offer are excellent and benefits include: company vehicle, overtime opportunities, pension scheme and annual leave allowance. We can consider candidates from the following locations: Wigan, Ashton-in-Makerfield, St Helens, Bolton, Bury, Heywood, Rochdale, Blackburn, Preston, Leigh, Stockport, Mancheste, Warrington, Knutsford, Altrincham, Runcorn, Frodsham, Ellesmere Port, Liverpool, Chester, Crosby, Formby, Southport, Skelmersdale, Ormskirk, Lytham St Annes, Leeds, Bradford, Halifax, Huddersfield. Experience / Qualifications: Must have experience working as a Clean Room Validation / Commissioning Engineer Will have extensive knowledge of HTM 0301 and HSG 258 Adaptable to company travel requirements Ideally will hold the BOHS P601 It would be advantageous to hold the CP (Competent Persons) and / or AP (Authorised Persons) Strong communication skills Good literacy, numeracy and IT proficiency The Role: Validation and commissioning of clean rooms, fume cupboards, LEV systems and safety cabinets Commissioning of HVAC systems Repairs and servicing on class 1-3 microbiological safety cabinets Calculating air volumes, air flows and air change rates HEPA and DOP filter testing Particle counting Setting up pressure cascades Performing hand-overs and demonstrations to clients Answering any technical and logistical issues from clients Producing detailed, bespoke technical service reports Building strong working relationships with clients Alternative Job titles: Validation Engineer, Commissioning Engineer, Critical Air Technician, Clean Air Technician, Critical Ventilation Engineer. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026

Junior Mechanical Building Services Engineer North Bristol Salary: Competitive (depending on experience) Full-time Permanent Hybrid Working Available An established building services engineering consultancy based in North Bristol is seeking a Junior Mechanical Building Services Engineer to join its growing team. This role is ideal for someone with 1 3 years experience within mechanical building services design who is looking to further develop their career within a supportive consultancy environment. You will assist in the delivery of mechanical design solutions across a variety of building projects, including both new build and refurbishment schemes across the UK. Key Responsibilities Assist with mechanical building services design across a range of projects Support senior engineers in delivering projects across RIBA work stages Produce technical calculations, drawings and design documentation Work alongside architects, structural engineers and contractors Assist with site visits, surveys and commissioning activities Contribute to the development of energy-efficient and sustainable engineering solutions Requirements 1 3 years experience within mechanical building services design Experience working within a building services consultancy or engineering environment Understanding of HVAC systems, ventilation, heating and cooling design Basic knowledge of UK building regulations and RIBA work stages Strong communication and teamwork skills A proactive attitude and willingness to learn IESVE or similar building performance modelling tools Degree, HND or HNC in Mechanical Engineering or Building Services Engineering What s on Offer Competitive salary based on experience Hybrid and flexible working Opportunity to work on a variety of building services design projects Supportive environment with strong training and career development

Technical Publications Manager Building Services Engineering (Hybrid, Berkshire) Location: Berkshire (Hybrid 2 days per week in the office) Hours: Full-time or Part-time considered Contract: Permanent Also suitable for Senior Building Services Engineers with technical writing or guidance experience. Are you a technically credible Building Services / MEP / HVAC Engineer ready to influence industry best practice? This is a unique opportunity for an experienced building services professional to move into or further develop within a knowledge-led, high-impact role shaping technical guidance for the sector. You may already have experience as a Technical Author, Technical Consultant, Associate Engineer, Engineering Manager , or you could be a senior engineer looking to step away from project delivery and into a more strategic, industry-facing position. The Role You will take ownership of technical publication projects from concept through to release, ensuring quality, accuracy, relevance and commercial alignment. Key responsibilities include: Developing and managing a technical publications roadmap Gathering industry intelligence and identifying emerging guidance needs Project managing publications from inception to production Authoring and contributing to technical guidance within your area of expertise Reviewing, editing and quality-checking technical content Working with industry stakeholders and steering groups Supporting delivery of content via webinars, articles and training Staying ahead of industry trends, standards and innovation About You You will have: An engineering qualification in Building Services Engineering or a related discipline Practical experience in the design, installation, commissioning or operation of building services systems Strong technical writing, reporting or documentation skills (publications, reports, bids, guidance, web content) Excellent attention to detail and editorial standards The ability to manage multiple projects and stakeholders simultaneously Credibility and a strong network within the building services industry Experience in technical publications, lecturing, presenting or industry guidance writing is advantageous but deep sector expertise is essential. Why Apply? Hybrid working (2 days per week in Berkshire office) Open to full-time or part-time professionals High-impact, industry-influencing role Opportunity to step into thought leadership Work at the centre of technical excellence in building services If you're ready to use your building services expertise in a more strategic, knowledge-driven capacity we d love to hear from you. Apply now.

About the Role An exciting opportunity has arisen for a Project Manager to join a well-established building services engineering contractor with a strong focus on mechanical systems. The successful candidate will have extensive experience in mechanical building services. This role is ideally suited to a mechanically biased Project Manager with a strong background in commerical and industrial mechanical installations Key Responsibilities Manage a single mechanical building services project, ensuring delivery within budget and to client satisfaction Develop and maintain detailed project programme, coordinating labour, materials, and subcontract resources to meet deadlines Oversee the installation and commissioning of mechanical systems, ensuring compliance with specifications and industry standards Maintain high quality standards across all mechanical installations Ensure full compliance with Health & Safety requirements, including implementation of Permit to Work systems, Risk Assessments, COSHH, and Method Statements Coordinate site setup and ensure all necessary H&S documentation and consumables are in place prior to commencement Liaise with internal HSQE teams to maintain compliance and best practice Review and interpret mechanical specifications and drawings, ensuring project requirements are fully achieved Manage subcontractors and conduct pre-start and pre-order meetings, ensuring clear scope definition and documentation Monitor contractual obligations and proactively manage variations and change control processes Oversee financial management of projects, including valuations, invoicing, cost control, and variation recovery Demonstrate strong technical knowledge of mechanical installation techniques and commissioning processes Provide regular progress reports, including programme updates and redline reporting where required Maintain clear and professional communication with clients, consultants, and site teams Accurately estimate labour and material requirements for mechanical systems and apply lessons learned to future projects Represent the organisation professionally at all times Person Specification Proven experience as a Project Manager within the construction or building services industry, with a strong mechanical bias Demonstrable experience delivering any of the following HVAC, plumbing, heating, ventilation, air conditioning, and related mechanical projects Strong understanding of mechanical drawings, specifications, and commissioning processes Excellent client-facing and internal communication skills Strong organisational and time management skills with attention to detail Project Management qualification or equivalent experience Experience managing site teams and subcontractors Strong commercial awareness and experience managing project finances Critical thinking and problem-solving ability Security clearance advantageous Full UK driving licence

Job Title: HVAC Technical Manager Location: Leeds, West Yorkshire (Hybrid Working) Salary: 50,000 to 55,000 + Package (Listed Below) Company Pension Bonus Scheme Company Car or Car Allowance Office Free Parking Role Highlights: Working on large blue chip retail store frameworks Fantastic growth and progression opportunities Role Overview: As the Technical Manager , you will support the design and delivery teams in completing HVAC packages for major food retail accounts across the UK. The role will involve overseeing project scoping, system design validation, equipment selection and installation to ensure HVAC systems are technically compliant, energy efficient and delivered in line with client and project requirements. Key Requirements: HNC, HND or Degree in Mechanical Engineering / Building Services Engineering or HVAC related qualification CSCS Card Full UK Driving License (Able to Travel Nationwide) Strong knowledge of HVAC systems including VRF, heat pumps, AHUs and ventilation systems Experience completing or reviewing heating and cooling load calculations and system sizing Responsibilities: Manage mechanical contracts for retail & commercial fit-out projects, overseeing scope, budgets, timelines and compliance with client specifications. Perform or review heating and cooling load calculations, heat loss/gain and ventilation requirements to ensure accurate system sizing and performance. Lead early-stage project scoping including site surveys, capturing client requirements and defining suitable HVAC system strategies. Coordinate with project management, engineering and site teams to ensure smooth delivery of HVAC, refrigeration, plumbing and fire protection systems. Review and approve technical submissions including drawings, equipment schedules and specifications to ensure compliance with design intent and industry standards. Lead the negotiation and administration of subcontractor and supplier agreements, ensuring cost-effective and high-quality delivery. Monitor project progress, track costs against budgets and manage variations, implementing corrective actions to mitigate risks and maintain profitability. Oversee installation planning and sequencing to ensure systems are installed in accordance with design intent, manufacturer requirements and safety standards. Manage site teams, supervisors and subcontractors to maintain installation quality, productivity and compliance with RAMS and health & safety procedures. Provide contractual and technical guidance to project teams, resolving complex design or site challenges where required. Build and maintain strong relationships with clients, subcontractors and suppliers to support project delivery and long-term partnerships. Witness system commissioning and performance testing, ensuring installations meet design criteria, efficiency targets and client expectations. Identify potential risks and opportunities across mechanical works and support continuous improvement in HVAC design, installation and delivery processes. Contacts to Apply: Sam Hunter - Associate Director: (phone number removed) Cameron Lally - Senior Resourcer: (phone number removed)

Mechanical Building Services Project Engineer Department : Mechanical Projects Reports To : Head of Department / Director Overview. The employer is a Midlands based Mechanical and Electrical design and build contractor operating within multifaceted industrial and commercial sectors. The applicant will be responsible for the project management, co-ordination, installation & commissioning of Mechanical HVAC multifaceted systems within commercial and industrial buildings, Mechanical value ranging from circa £50k to £5m+ in value. This includes the development of system specifications, the preparation and overseeing of construction drawings and documentation, and the coordination/ integration of contractors and subcontractors. The ideal candidate will have a strong understanding of HVAC principles and practices. Some experience / understanding of with building information modelling (BIM) software would be helpful but not critical. The candidate will work out of the Nottingham office. Responsibilities. Develop system specifications and prepare construction drawings and documentation, Plant and equipment schedules etc. for Mechanical HVAC systems. Technical submissions and RFI communication with PM s. Place orders with suppliers and sub-contractors. Co-ordinate site works including management of subcontractors. Manage the whole contract costs from inception to final account, including preparing and agreeing monthly application for payments. Keep track of project costs including labour and material expenditure, forecasts and P&L. Manage variations and additional works and their associated costs. Conduct site visits and inspections and attend Client and sub-contractor meetings. Resolve problems and issues during construction. Organise and oversee commissioning and start-up of new systems. Prepare Operating and Maintenance literature. Provide technical support to clients and training. Stay up to date on the latest HVAC technologies Qualifications. Demonstrate commensurate job acumen by, Formal college education with HND / HNC or degree in Mechanical Building Services. or Alternative method if appropriate. 10+ years of experience in the design and build Mechanical HVAC systems industry. Strong understanding of HVAC principles and practices. Experience or at least understanding of AutoCAD and Building Information Modelling (BIM) software. Excellent written and verbal communication skills. Ability to work independently and as part of a team. Strong problem-solving and analytical skills. Benefits. Competitive salary commensurate with experience and capabilities within the range £50k to £70k. Comprehensive benefits package, including Car, Phone, Computer, Pension, bonus scheme. Opportunity to work on challenging and rewarding projects. Collaborative and supportive work environment. Additional Information. This is a full-time position. The candidate will be office based in our Nottingham Office and residing within a reasonable daily travel distance.

Air Conditioning Engineer Mandala Group are working with a long-established commercial M&E contractor as they continue to expand following a recent management buyout. Operating for over 40 years with a £2 2.5m turnover and a team of 20, the business delivers commercial electrical and mechanical services across London and the South East, with particular strength in HVAC control systems and integrated M&E projects. We are seeking a qualified Commercial Air Conditioning Engineer to join their growing team. The Role for Air Conditioning Engineer This is a predominantly site-based role across London and the South East, responsible for: Installation and commissioning of commercial air conditioning systems Service, maintenance and fault-finding Working alongside in-house electrical and controls engineers Supporting delivery of integrated HVAC projects Contributing to commercial projects up to £1.2m The workload is diverse, combining project delivery and technical problem-solving rather than purely reactive service work. Working Structure for Air Conditioning Engineer 08 30 (site dependent flexibility) Overtime paid at enhanced rates (x1.5 / x2) Travel expenses included Tools provided Company vehicle (role dependent after probation) Benefits for Air Conditioning Engineer 22 days annual leave + Christmas shutdown NEST pension Annual performance bonus Training and development opportunities Reward scheme Supportive, team-led environment

We are seeking an experienced Site Manager with a strong Mechanical & Electrical (M&E) background to oversee delivery of works at Birmingham New Street Station, one of the UK's busiest rail hubs operated by Network Rail. The Site Manager will be responsible for the day-to-day management of site activities, ensuring that all M&E works are delivered safely, efficiently, and in compliance with rail industry standards and project requirements. The role requires close coordination with contractors, engineering teams, and station stakeholders in a complex live operational environment. Key Responsibilities Site Management Manage daily site operations for M&E works within the station environment. Supervise subcontractors, suppliers, and site operatives to ensure works are delivered safely and to programme. Ensure works are coordinated effectively within a live operational railway environment. Monitor progress and report updates to the Project Manager and senior project team. Mechanical & Electrical Works Oversee installation and commissioning of mechanical and electrical systems, including: Power distribution Lighting systems Fire detection and alarm systems HVAC and ventilation systems Communications and station systems Ensure works comply with design drawings, specifications, and engineering standards. Health, Safety & Compliance Maintain a strong safety culture on site and ensure full compliance with health and safety regulations. Review and implement Risk Assessments and Method Statements (RAMS). Ensure compliance with standards set by Network Rail and relevant railway regulations. Conduct site inspections, toolbox talks, and safety briefings. Programme & Coordination Coordinate works with other disciplines including civil, rail systems, and station operations teams. Manage site logistics in a busy station environment with passenger traffic. Ensure works are delivered in line with project programme and possession/access constraints. Quality Assurance Ensure all installations meet quality standards and project specifications. Support inspections, testing, commissioning, and handover documentation. Maintain accurate site records, daily reports, and progress documentation. Stakeholder Management Liaise with project managers, engineers, station management, and contractors. Coordinate works with operational teams to minimise disruption to station activities. Attend project meetings and provide technical and progress updates. Skills & Experience Essential Proven experience as a Site Manager on infrastructure or rail projects. Strong Mechanical & Electrical (M&E) background. Experience delivering works in live operational environments. Ability to manage subcontractors and multidisciplinary teams. Strong knowledge of construction safety procedures and compliance requirements. Desirable Experience working on projects for Network Rail. Experience within major railway stations or transport infrastructure. Familiarity with station systems and railway engineering standards. Working Shifts / Times: Sunday - Thursday Night (21:45pm - 06:00am)

Job Title: Mechanical Project Manager Location: London / South of England Salary: 65,000 - 70,000 per annum Type: Permanent About the Role We are looking for a Mechanical Project Manager to lead high-quality mechanical building projects from design through to completion. This isn't just a desk job you'll be at the heart of delivering complex HVAC, heating, ventilation, and specialist mechanical systems for commercial, residential, and niche projects, including medical and heritage facilities. You'll work closely with engineers, designers, and on-site teams to ensure projects are delivered efficiently, safely, and to the exacting standards that modern building services demand. Key Responsibilities Take ownership of mechanical projects from concept to completion, ensuring designs translate seamlessly into practical, on-site solutions. Coordinate and supervise installation teams and subcontractors, maintaining quality, safety, and timelines. Manage project budgets, schedules, and resources, with a proactive approach to identifying and mitigating risks. Be the key point of contact for clients, consultants, and stakeholders, providing clear updates and solutions-focused communication. Ensure all mechanical systems comply with UK building regulations, health & safety standards, and best practice. Support post-installation commissioning and handover, ensuring systems operate efficiently and clients are fully satisfied. What We're Looking For Essential: Proven track record managing mechanical building projects, ideally in commercial, residential, or specialist sectors. Deep understanding of HVAC, heating, and ventilation systems. Skilled in translating technical designs into real-world installations. Strong leadership skills and experience managing on-site teams and subcontractors. Hands-on familiarity with CAD and BIM tools for mechanical engineering. Up-to-date knowledge of UK building regulations and industry standards. Desirable: Experience with renewable energy systems or mechanical installations in medical facilities. Professional qualifications in mechanical engineering, project management, or a related field. What You'll Get Competitive salary: 65,000 - 70,000 per annum Lead interesting and technically challenging projects that make a visible difference. Opportunities for career growth and skills development in a specialist engineering environment. Collaborative, supportive, and dynamic team culture. Interested? Click Apply now! For more information call Millie-Anne (phone number removed). Alternativly, email your CV to (url removed)

Your New Company Hays Building Services are pleased to be assisting a leading organisation in the recruitment of a Mechanical Project Manager to join their expanding team. Your New Role You will be responsible for the successful delivery of a range of technical projects from concept through to commissioning and handover, ensuring projects are delivered safely, on time, within budget, and in compliance with all relevant industry standards and client requirements. You will be managing and coordinating project teams including engineers, designers, technicians, and subcontractors, be responsible for full mechanical cost control including budgeting, estimating, package procurement, subcontract account management, and agreement of final accounts, as well as developing and maintaining strong relationships with clients, contractors, and key stakeholders. What You'll Need To Succeed You will be an experienced project manager with strong technical knowledge of building services and HVAC systems, experience managing projects through the full lifecycle, from pre-construction through to delivery, as well as excellent organisational, communication, and stakeholder management skills with the ability to track and file information efficiently and effectively. What You'll Get In Return This role is being offered with a salary between 50,000 - 70,000 per annum depending on experience on a permanent contract with good benefits and a bonus. What You'll Need To Do Now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

We are seeking an experienced HVAC comissioing Engineer to support the delivery and verification of mechanical building services systems across a range of projects. The successful candidate will work closely with senior commissioning managers and project teams to ensure that HVAC systems are commissioned safely, efficiently, and in compliance with design specifications and industry standards. The role will involve assisting with commissioning planning, system testing, inspections, and documentation, while gaining experience to develop into a senior commissioning position. Key Responsibilities Carry out commissioning activities for HVAC systems, including ventilation, chilled water, heating, and hydronic systems. Assist in reviewing mechanical designs for commissionability and compliance. Provide technical support to project teams during procurement, installation, and commissioning phases. Support the development and coordination of the commissioning programme with project planners and site teams. Coordinate with electrical teams to assist with power-on schedules and system readiness. Review technical documentation including Test Completion Plans (TCPs), commissioning procedures, and technical submittals. Conduct site inspections to monitor installation quality and identify commissioning readiness issues. Assist with and witness Factory Acceptance Tests (FATs) where required. Track and report commissioning progress through regular updates and reporting. Carry out and witness commissioning activities in accordance with industry codes of practice and obtain client sign-off. Participate in integrated systems testing, including Cause & Effect testing, power outage tests, and other client-specific validation requirements. Assist with environmental and specialist testing, including regulatory or client validation procedures. Compile and review final commissioning documentation for project completion and handover. The role is mechanically focused, though a general understanding of electrical and public health systems is beneficial. Requirements Experience and Qualifications The ideal candidate will have at least 5 years of experience within the Building Services industry, ideally within HVAC commissioning, mechanical engineering, or building services project delivery. Minimum Requirements CSCS Blue Card Building Services qualification (HNC, HND, NVQ or equivalent) CSA Grade 3 or 4 (preferred) Essential Skills and Attributes Strong understanding of HVAC systems, including ventilation, chilled water, heating, and hydronic distribution. Ability to interpret mechanical services drawings and specifications. Knowledge of flushing, cleaning, and water treatment processes. Familiarity with testing, balancing, and commissioning procedures. Understanding of building services design principles. Awareness of UK Building Regulations, CIBSE guidance, BSRIA commissioning standards, and relevant British Standards. Good communication and coordination skills when working with multidisciplinary project teams. Strong computer literacy and documentation skills. Package 25 days annual leave (increasing to 30 days with service) plus bank holidays Company car or car allowance Private healthcare and life insurance Pension scheme with 5.5% employer contribution Travel expenses where required If you are intertsed in this role, please all Chris at TXM recruit or click apply.

RecruitLab is working with a growing Building Services Engineering contractor that delivers high-quality mechanical and HVAC solutions across commercial, industrial, retail and residential sectors throughout the UK. Due to continued growth and a strong pipeline of upcoming projects, the business is looking to appoint an experienced HVAC Project Manager to join their team. The company currently operates with a small but highly experienced team, and they are looking for someone who can play an important role in delivering projects while supporting the business as it continues to grow substantially over the next few years. Role Overview The HVAC Project Manager will be responsible for managing mechanical building services and HVAC projects from project handover through to completion and client handover. This role requires a strong understanding of mechanical services and HVAC systems, alongside the ability to manage subcontractors, project programmes, and client relationships. The successful candidate will work closely with the management team to ensure projects are delivered safely, on time and within budget. Key Responsibilities Project Delivery Managing HVAC and mechanical building services projects from design coordination through to commissioning and handover Ensuring projects are delivered on programme and within budget Coordinating subcontractors, suppliers and site teams Monitoring project progress and resolving issues where required Technical Oversight Reviewing mechanical drawings, schematics and technical specifications Overseeing installation of systems including: HVAC systems, Ventilation systems, Heating and chilled water systems, Air conditioning systems, Domestic water and gas services, Building energy management systems (BMS) Providing technical guidance to installation teams Commercial Management Supporting project cost control and financial reporting Managing subcontractor procurement and packages Identifying and managing variations and changes Client & Stakeholder Management Attending site meetings, design meetings and project reviews Building strong working relationships with clients, consultants and main contractors Providing regular project progress updates Skills & Experience Required Essential Experience working as a Project Manager or Senior Project Engineer within HVAC or Mechanical Building Services Strong technical understanding of mechanical services and HVAC systems Ability to interpret mechanical drawings and technical specifications Experience managing site teams, subcontractors and suppliers Strong communication and organisational skills Full UK driving licence Desirable HNC/HND or Degree in Mechanical Engineering or Building Services Engineering Knowledge of building services standards and regulations Experience working on commercial or industrial projects Personal Attributes Strong problem-solving ability Commercial awareness Excellent communication skills Ability to work independently and manage multiple projects Motivated to contribute to the growth of a developing business We are committed to equal opportunities for everyone. We embrace diversity and believe that a balanced, inclusive workforce is crucial to our business. We do not tolerate discrimination, harassment or bullying towards any candidates or employees. We are proud to be an equal opportunities employer. Due to the high volume of applications, we receive, it is not always possible to respond to unsuccessful applicants. Therefore, if we have not responded to your application within five days, please assume that on this occasion your application has not been successful.

Our client, a well-established and growing Mechanical & Electrical contractor, is seeking an experienced Mechanical Site Manager to oversee the delivery of mechanical installations on commercial and industrial projects. This is an excellent opportunity to join a reputable contractor delivering high-quality projects across the region. The Role: As Mechanical Site Manager, you will take responsibility for the day-to-day management of mechanical works on site, ensuring projects are delivered safely, on time, and to the highest quality standards. Key Responsibilities: Manage and coordinate all mechanical installation activities on site Supervise subcontractors, engineers, and site operatives Ensure works are delivered in line with project specifications, drawings, and programme Maintain health & safety compliance and site documentation Conduct site meetings and provide progress updates to the project team Coordinate with main contractors, consultants, and other trades Monitor quality standards and ensure work meets required regulations Assist with commissioning and project handover Requirements: Proven experience as a Mechanical Site Manager / Mechanical Supervisor Background in commercial, residential, or industrial M&E projects Strong knowledge of HVAC, pipework, plantroom installations, and mechanical systems Excellent leadership and organisational skills Strong understanding of health & safety regulations Relevant trade background or mechanical engineering qualification preferred SMSTS / SSSTS, CSCS Card required Ability to read and interpret technical drawings What's on Offer: Competitive salary or day rate Opportunity to work on high-profile projects Supportive and professional working environment Long-term career opportunities with a growing contractor What you need to do now: If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or reach out to Adam at (url removed) or (phone number removed). If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDC

Job Title: BMS Controls Engineer (Self-Employed) Location: London & Surrounding Areas Rate: Competitive (Self-Employed / Contract) Start: Immediate / As Soon As Possible We are currently recruiting for an experienced BMS Controls Engineer to work with one of our established clients who specialise in the manufacture and installation of electrical and HVAC systems within data centres across London and the surrounding areas. This is an excellent opportunity for a skilled engineer to join a growing workload of projects within the data centre sector. The role is offered on a self-employed basis , however for the right candidate this could lead to ongoing long-term work . Key Responsibilities: Installation, commissioning, and maintenance of Building Management System (BMS) controls Working on electrical and HVAC control systems within data centre environments Fault finding, testing, and system optimisation Reading and interpreting technical drawings and control schematics Ensuring work is completed to industry and site standards Requirements: Proven experience as a BMS Controls Engineer Relevant electrical / controls qualifications Experience working with HVAC systems and BMS within commercial or data centre environments Ability to work independently and manage tasks on site Strong fault-finding and commissioning skills If interested and feel you may be suitable, please apply or contact Josh at Interaction Construction (phone number removed) / (phone number removed) INDC

Our client, a well-established and growing Mechanical & Electrical contractor, is seeking an experienced Mechanical Site Manager to oversee the delivery of mechanical installations on commercial and industrial projects. This is an excellent opportunity to join a reputable contractor delivering high-quality projects across the region. The Role: As Mechanical Site Manager, you will take responsibility for the day-to-day management of mechanical works on site, ensuring projects are delivered safely, on time, and to the highest quality standards. Key Responsibilities: Manage and coordinate all mechanical installation activities on site Supervise subcontractors, engineers, and site operatives Ensure works are delivered in line with project specifications, drawings, and programme Maintain health & safety compliance and site documentation Conduct site meetings and provide progress updates to the project team Coordinate with main contractors, consultants, and other trades Monitor quality standards and ensure work meets required regulations Assist with commissioning and project handover Requirements: Proven experience as a Mechanical Site Manager / Mechanical Supervisor Background in commercial, residential, or industrial M&E projects Strong knowledge of HVAC, pipework, plantroom installations, and mechanical systems Excellent leadership and organisational skills Strong understanding of health & safety regulations Relevant trade background or mechanical engineering qualification preferred SMSTS / SSSTS, CSCS Card required Ability to read and interpret technical drawings What's on Offer: Competitive salary or day rate Opportunity to work on high-profile projects Supportive and professional working environment Long-term career opportunities with a growing contractor What you need to do now: If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or reach out to Adam at (url removed) or (phone number removed). If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDC

Mechanical Project Manager Location: East Midlands (projects across the region) Salary: Competitive + Car Allowance + Benefits PSR Solutions are working in partnership with a well-established and growing Mechanical & Electrical contractor to recruit an experienced Mechanical Project Manager to join their delivery team. Our client is a reputable regional SME with a strong track record of delivering mechanical and electrical building services projects typically valued between 1m and 5m . They operate across a variety of sectors including commercial, education, healthcare, industrial and public sector developments throughout the East Midlands. Due to a strong pipeline of secured work and continued growth, they are looking to appoint a Mechanical Project Manager who can take ownership of projects from pre-construction through to successful handover. The Role The successful candidate will be responsible for the management and delivery of mechanical building services packages on a range of projects across the East Midlands. You will work closely with internal commercial and design teams, as well as main contractors and subcontractors on site, ensuring projects are delivered safely, on programme and within budget. This is an excellent opportunity to join a well-run regional contractor where you will play a key role in project delivery and client relationships. Key Responsibilities Manage mechanical building services projects from pre-construction through to completion Oversee programme delivery, project performance and installation progress Coordinate with design teams, subcontractors and suppliers Attend and lead project meetings with main contractors and clients Ensure health & safety compliance across projects Work closely with the commercial team on procurement, cost control and variations Monitor project budgets and programme milestones Support commissioning activities and final project handover Requirements Proven experience as a Mechanical Project Manager within the building services sector Experience delivering projects typically valued 1m - 5m Strong technical understanding of mechanical building services installations (HVAC, pipework etc.) Ability to manage site teams and subcontractors effectively Good commercial awareness and programme management skills Strong communication and stakeholder management abilities Full UK driving licence Desirable: HNC/HND or Degree in Mechanical Engineering or Building Services SMSTS / SSSTS certification Experience working for an M&E Contractor (not FM) What's on Offer Competitive salary and benefits package Car allowance Opportunity to join a growing and well-respected regional M&E contractor Long-term pipeline of projects across the East Midlands Genuine opportunity to make an impact within a supportive SME environment Apply For more information or to apply, please contact Ben @ PSR Solutions with a copy of your CV for a confidential discussion.

BMS Commissioning Engineer Location: Central London Salary: £45,000 £65,000 per annum (depending on experience) We are looking for an experienced and driven BMS Commissioning Engineer to join a growing team. This is an exciting opportunity for someone who enjoys delivering high-quality commissioning work across a range of commercial and industrial projects. You ll be working with leading BMS technologies and playing a key role in ensuring systems are delivered, tested, and optimised to the highest standards. The Role As a BMS Commissioning Engineer , you will be responsible for: Commissioning BMS systems on new build and refurbishment projects Carrying out point-to-point testing, I/O checks, and full system validation Uploading, modifying, and optimising software strategies Working closely with project managers, electricians, and mechanical teams to ensure smooth project delivery Producing accurate commissioning documentation, test sheets, and handover packs Identifying and resolving system issues, ensuring projects meet design intent Supporting client demonstrations, witness testing, and final sign-off Ensuring all work is completed in line with health & safety requirements Key Skills & Experience We re looking for someone with: Proven experience as a BMS Commissioning Engineer Strong understanding of HVAC plant, control theory, and building services Hands-on commissioning experience with at least one of the following systems: Trend Tridium Niagara Distech Controls Cylon (Aspect) Ability to read and interpret control panel drawings, schematics, and design documentation Strong software skills, including strategy interrogation and adjustment Excellent fault-finding and problem-solving ability What s on Offer Overtime, call-out, and bonus opportunities Ongoing training and development across multiple BMS platforms Career progression within a growing technical team Pension, holiday allowance, and additional company benefits

Senior BMS Commissioning Engineer Location: Central London Salary: Up to £85,000 + Benefits About the Role We are seeking a highly skilled Senior BMS Commissioning Engineer to join our team and take ownership of multiple high-profile projects across Central London. This is an exceptional opportunity for a motivated professional who excels in delivering high-quality commissioning work and leading technical delivery on complex commercial and industrial projects. Key Responsibilities Lead and oversee commissioning activities across multiple projects, ensuring timely and quality delivery. Perform advanced point-to-point testing, I/O checks, and full system validation. Upload, modify, and optimise software strategies for peak system performance. Provide technical leadership, mentoring, and guidance to commissioning teams. Collaborate closely with project managers, contractors, and clients to ensure smooth project execution. Produce accurate commissioning documentation, test sheets, and comprehensive handover packs. Diagnose and resolve complex system issues, ensuring compliance with design intent. Support client demonstrations, witness testing, and final project sign-off. Key Skills & Experience Extensive experience in BMS commissioning, preferably in a senior or lead role. Strong knowledge of HVAC systems, control theory, and building services. Hands-on experience with at least one of the following systems: Trend Tridium Niagara Distech Controls Cylon (Aspect) Ability to read and interpret control panel drawings, schematics, and design documentation. Advanced software skills, including strategy interrogation and optimisation. Excellent leadership, fault-finding, and problem-solving abilities. What s on Offer Competitive salary of up to £85,000, depending on experience. Overtime, call-out, and performance bonus opportunities. Continuous training and development across multiple BMS platforms. Career progression within a growing and technically focused team. Pension, holiday allowance, and additional company benefits.

On behalf of our client, we are seeking to recruit a Building Services Engineer on an initial 12 -month contract. As the Building Services you will be overseeing and inspecting building services installations (Mechanical, Electrical, and Fabric) on our projects to ensure they meet the highest standards of quality, compliance, and design specifications. Role: Building Services Engineer Pay: Up to 40 per hour Via Umbrella Location: Portsmouth or Stevenage Contract: Monday - Friday 37 hours per week, 12 months IR35 Status: Inside Security Clearance : Must be able to achieve Security Clearance, UK eyes only project Responsibilities Site Inspection & Quality Assurance: Conduct regular, thorough site inspections of all building services and building installations (HVAC, plumbing, electrical, fire systems, controls, structure etc.) to ensure compliance with drawings, specifications, statutory regulations (e.g., Building Regulations, Health & Safety), and industry best practices. Defect Identification & Resolution: Identify and document any defects, non-conformances, or deviations from the design and specifications. Work collaboratively with our building and construction and minor works project managers to ensure effective resolution of all issues identified. Documentation & Reporting: Maintain detailed site records, including daily logs, progress reports, photographic evidence, and non-conformance reports. Prepare comprehensive weekly/monthly reports for the management team, highlighting progress, issues, and proposed solutions. Material & Workmanship Verification: Verify the quality of materials and equipment used, ensuring they meet specified standards and are correctly installed. Liaison & Communication: Act as a key liaison between the Technical Services, Building and construction, contractors, designers, and other stakeholders. Attend site meetings, technical meetings, and progress reviews, contributing technical insights and problem-solving. Handover Documentation: Ensure all relevant handover documentation, including Safety Files, O&M manuals, as-built drawings, and commissioning reports, are accurate and complete to the required standard. Essential Skills: A qualification in Building Services Engineering, Electrical Engineering, Mechanical Engineering, Construction, or a related discipline (e.g., HNC/HND, Degree, City & Guilds). Exceptional attention to detail and strong observational skills. Excellent written and verbal communication skills, with the ability to produce clear, concise reports. Strong problem-solving and analytical abilities. Ability to work autonomously and as part of a multidisciplinary team. Proficient in reading and interpreting architectural and engineering drawings and specifications. Competence in using relevant software packages (e.g., Google OS, AutoCAD). A proactive, organised, and diplomatic approach. Proven experience as a Building Services and buildings Clerk of Works, Site Inspector, or similar role with a strong focus on industrial installations. In-depth knowledge of building services systems (mechanical, electrical, buildings). Demonstrable experience in construction site management and quality control. Sound knowledge of relevant Building Regulations, British Standards, and Health & Safety legislation. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

Area Sales Manager - Industrial Heating Solutions Are you an experienced sales professional with a strong technical aptitude and a passion for consultative sales? We're partnering with a leading UK-based industrial engineering manufacturer to recruit an Area Sales Manager to join their dynamic commercial team. Our client specialises in the design, manufacture, and supply of industrial heat transfer solutions - including steam boilers, hot water systems, thermal fluid heaters, skid-mounted plant systems and associated controls - for commercial, industrial and process applications. They provide bespoke engineered solutions supported by comprehensive after-sales service, training, and commissioning support across a range of sectors including healthcare, food & beverage, manufacturing and pharmaceuticals. This is suitable for an Area Sales Manager, Business Development Manager, Sales Engineer or Account Manager who possesses a background in heating with strong end-user and consultant relationships Role requirements: Strong understanding of industrial heating equipment Current route to market must be industrial end-users or consultants Track record of successfully specifying and supplying industrial heating equipment Based in the West Midlands Package: Salary 50,000 - 60,000 depending on experience Bonus 10,000 - 15,000 Car or car allowance 33 days holiday 8% pension Interested? Apply now for a confidential conversation about this role and others WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.