Our client are looking to appoint an experienced external wall Surveying, Fire engineer. This is an opportunity to join our experienced consultancy fire engineering and surveying consultancy team. The position is full time with allowance for current, relevant studies with immediate start. Salary is dependent on experience as negotiable, based on accreditation, qualifications and experience. The applicant should hold 3 or more of the following: • Degree level qualification in fire engineering, building survey, Building/Civil Engineering • Minimum 5 years relative experience in a consultancy or similar environment • Be aware of appropriate legislation including Part B and design guidance for use in the UK. • Worked on high-risk buildings with an awareness of the full life cycle of fire safety; from design through to handover. • Be aware of the RIBA stages of work 2020, HSE Gateway, Building Safety Acts 2022, PAS 9980 and EWS1 assessment The applicant should also have following skills & Experience: • Have experience in report writing and engaging across various parties; including colleagues and clients. • The right candidate will have worked in leadership roles or been a senior member within their experience. • You will have positive communication skills, be collaborative, and be creative and engaging with an ability to multitask projects concurrently, providing deliverables as per your Job. The applicant should have a willing, positive attitude to learning, where applicable, and have the ability to negotiate discussions with contractors in site-based fire engineering studies. The ability to work well as part of a team is also important. Knowledge of EWS1 surveys and processes will be advantageous but not essential, as training will be offered. The candidate should also hold a driving licence. They should have flexibility, be confident and within areas of construction pathology, have undertaken studies in producing detailed drawings and writing reports. Further requirements are as detailed below; • Knowledge of Building Regulation Approved Document B is preferred; • Understanding of external wall façade systems and be able to identify key external wall construction features; • Ability to carry out intrusive surveys; • Understand construction materials with a general understanding of performance; • Excellent report writing skills; • Prepared to travel both nationally and internationally with periodic overnight stays; Full support and training will be provided The role will require autonomous working with a flexibility of at home, office, and site inspections. The role is client focused, candidates are expected to build strong relationships with project stakeholders and contractors and have a professional presentable attitude. In return they will offer the right candidate: 1. A competitive salary 2. A chance to work with leading industry contractors, local authority, property practices and development management companies 3. Exposure to amazing commercial and residential projects 4. Opportunity to excel your career in our large, but family environment company 5. Optional opportunities to travel abroad 6. Great Annual Bonus scheme (subject to 12 months enrolment) 7. Company car scheme following completion of probation period (optional) 8. Gym membership 9. Applicable professional self-development courses chartership support 10. Training and development with career opportunities within a growing consultancy 11. Flexible working from home 12. Well-being lifestyle balance support 20 days holiday + bank holidays and Christmas 23rd dec 2nd Jan
10/03/2026
Full time
Our client are looking to appoint an experienced external wall Surveying, Fire engineer. This is an opportunity to join our experienced consultancy fire engineering and surveying consultancy team. The position is full time with allowance for current, relevant studies with immediate start. Salary is dependent on experience as negotiable, based on accreditation, qualifications and experience. The applicant should hold 3 or more of the following: • Degree level qualification in fire engineering, building survey, Building/Civil Engineering • Minimum 5 years relative experience in a consultancy or similar environment • Be aware of appropriate legislation including Part B and design guidance for use in the UK. • Worked on high-risk buildings with an awareness of the full life cycle of fire safety; from design through to handover. • Be aware of the RIBA stages of work 2020, HSE Gateway, Building Safety Acts 2022, PAS 9980 and EWS1 assessment The applicant should also have following skills & Experience: • Have experience in report writing and engaging across various parties; including colleagues and clients. • The right candidate will have worked in leadership roles or been a senior member within their experience. • You will have positive communication skills, be collaborative, and be creative and engaging with an ability to multitask projects concurrently, providing deliverables as per your Job. The applicant should have a willing, positive attitude to learning, where applicable, and have the ability to negotiate discussions with contractors in site-based fire engineering studies. The ability to work well as part of a team is also important. Knowledge of EWS1 surveys and processes will be advantageous but not essential, as training will be offered. The candidate should also hold a driving licence. They should have flexibility, be confident and within areas of construction pathology, have undertaken studies in producing detailed drawings and writing reports. Further requirements are as detailed below; • Knowledge of Building Regulation Approved Document B is preferred; • Understanding of external wall façade systems and be able to identify key external wall construction features; • Ability to carry out intrusive surveys; • Understand construction materials with a general understanding of performance; • Excellent report writing skills; • Prepared to travel both nationally and internationally with periodic overnight stays; Full support and training will be provided The role will require autonomous working with a flexibility of at home, office, and site inspections. The role is client focused, candidates are expected to build strong relationships with project stakeholders and contractors and have a professional presentable attitude. In return they will offer the right candidate: 1. A competitive salary 2. A chance to work with leading industry contractors, local authority, property practices and development management companies 3. Exposure to amazing commercial and residential projects 4. Opportunity to excel your career in our large, but family environment company 5. Optional opportunities to travel abroad 6. Great Annual Bonus scheme (subject to 12 months enrolment) 7. Company car scheme following completion of probation period (optional) 8. Gym membership 9. Applicable professional self-development courses chartership support 10. Training and development with career opportunities within a growing consultancy 11. Flexible working from home 12. Well-being lifestyle balance support 20 days holiday + bank holidays and Christmas 23rd dec 2nd Jan
Design Manager Required - West London Office - Projects across London - Hybrid - 2/3 days from home - 350 - 500 a day Key requirement for this role is strong experience with the Building Safety Regulator (BSR) and the Gateway process. We are currently seeking an experienced Design Manager to lead the technical and design coordination for a complex High-Risk Building residential scheme in South West London. The successful candidate will have strong experience delivering multi-storey residential developments, along with a solid understanding of the Building Safety Act, including the gateway process, duty holder responsibilities and safety case requirements. This role will play a key part in delivering a major London regeneration project, working closely with internal technical teams, external consultants and stakeholders to ensure fully compliant, high-quality design delivery. Key Responsibilities - Lead the coordination, review and approval of architectural, structural and MEP design packages. -Manage design delivery across all RIBA stages , ensuring alignment with programme and construction sequencing. - Chair design team meetings, track design actions and maintain clear communication between consultants, subcontractors and internal project teams. - Coordinate design information to support buildability, logistics, quality benchmarks and high-rise construction sequencing. Building Safety Act & HRB Compliance - Ensure all design information complies with the Building Safety Act, including Gateways 2 and 3, duty holder obligations and the Golden Thread of information. -Oversee the preparation and coordination of documentation for the Safety Case, Fire & Emergency File, digital records and change control procedures. -Liaise with Principal Designer (CDM and Building Regulations), Building Control, Fire Engineers and Safety Consultants to ensure compliance throughout the project lifecycle. -Identify and manage design risks, ensuring mitigation strategies meet HRB regulatory standards. Technical Oversight & Quality Assurance -Review and approve technical drawings, subcontractor designs, specifications and calculations. -Ensure compliance with UK Building Regulations, Approved Documents, warranty provider requirements and planning conditions. -Support the development and management of the Design Delivery Programme (DDP) in line with the overall project programme. - Manage technical queries and RFIs from site, ensuring timely resolution. Project Delivery Support -Provide technical leadership during procurement, including subcontractor tender reviews, technical assessments and scope definition. - Coordinate the issue of construction information so site teams are working from the latest design packages. - Support client meetings, progress reporting and technical presentations where required. Experience & Skills Required Proven experience as a Design Manager (or Senior Design Coordinator ready to step up) within a main contractor or developer environment delivering HRB residential projects. Strong working knowledge of the Building Safety Act, including Gateway submissions and Golden Thread requirements. Experience coordinating multi-disciplinary design teams on medium to high-rise residential developments. Ability to interpret complex technical drawings across architecture, structural, MEP and fire engineering disciplines. Strong understanding of construction methodology, fa ade systems, fire compliance and building regulations. Excellent communication, organisation and problem-solving skills. Desirable Experience on London regeneration or mixed-use schemes. Familiarity with digital information management systems such as Procore. Relevant professional membership (RIBA, CIAT, CIOB or similar).
09/03/2026
Full time
Design Manager Required - West London Office - Projects across London - Hybrid - 2/3 days from home - 350 - 500 a day Key requirement for this role is strong experience with the Building Safety Regulator (BSR) and the Gateway process. We are currently seeking an experienced Design Manager to lead the technical and design coordination for a complex High-Risk Building residential scheme in South West London. The successful candidate will have strong experience delivering multi-storey residential developments, along with a solid understanding of the Building Safety Act, including the gateway process, duty holder responsibilities and safety case requirements. This role will play a key part in delivering a major London regeneration project, working closely with internal technical teams, external consultants and stakeholders to ensure fully compliant, high-quality design delivery. Key Responsibilities - Lead the coordination, review and approval of architectural, structural and MEP design packages. -Manage design delivery across all RIBA stages , ensuring alignment with programme and construction sequencing. - Chair design team meetings, track design actions and maintain clear communication between consultants, subcontractors and internal project teams. - Coordinate design information to support buildability, logistics, quality benchmarks and high-rise construction sequencing. Building Safety Act & HRB Compliance - Ensure all design information complies with the Building Safety Act, including Gateways 2 and 3, duty holder obligations and the Golden Thread of information. -Oversee the preparation and coordination of documentation for the Safety Case, Fire & Emergency File, digital records and change control procedures. -Liaise with Principal Designer (CDM and Building Regulations), Building Control, Fire Engineers and Safety Consultants to ensure compliance throughout the project lifecycle. -Identify and manage design risks, ensuring mitigation strategies meet HRB regulatory standards. Technical Oversight & Quality Assurance -Review and approve technical drawings, subcontractor designs, specifications and calculations. -Ensure compliance with UK Building Regulations, Approved Documents, warranty provider requirements and planning conditions. -Support the development and management of the Design Delivery Programme (DDP) in line with the overall project programme. - Manage technical queries and RFIs from site, ensuring timely resolution. Project Delivery Support -Provide technical leadership during procurement, including subcontractor tender reviews, technical assessments and scope definition. - Coordinate the issue of construction information so site teams are working from the latest design packages. - Support client meetings, progress reporting and technical presentations where required. Experience & Skills Required Proven experience as a Design Manager (or Senior Design Coordinator ready to step up) within a main contractor or developer environment delivering HRB residential projects. Strong working knowledge of the Building Safety Act, including Gateway submissions and Golden Thread requirements. Experience coordinating multi-disciplinary design teams on medium to high-rise residential developments. Ability to interpret complex technical drawings across architecture, structural, MEP and fire engineering disciplines. Strong understanding of construction methodology, fa ade systems, fire compliance and building regulations. Excellent communication, organisation and problem-solving skills. Desirable Experience on London regeneration or mixed-use schemes. Familiarity with digital information management systems such as Procore. Relevant professional membership (RIBA, CIAT, CIOB or similar).
Guildmore is seeking an experienced Senior Design Manager to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What We Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.
09/03/2026
Full time
Guildmore is seeking an experienced Senior Design Manager to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What We Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.
Principal Mechanical Design Engineer Hybrid Working (Office & Remote) Up to £60,000 Excellent Benefits Package Full-Time, Permanent About the Role We are seeking an experienced and motivated Principal Mechanical Design Engineer to join our growing Building Services consultancy. This is an exciting opportunity for a skilled engineer to take a leading role in the design and delivery of high-quality mechanical building services projects across a diverse portfolio. Working in a hybrid environment, you will collaborate with multidisciplinary teams, manage project delivery, and provide technical leadership to junior engineers while ensuring projects are delivered to the highest standards. Key Responsibilities Lead the mechanical design of building services systems including HVAC, heating, ventilation, and public health services. Produce and review detailed engineering designs, calculations, specifications, and technical reports. Manage and coordinate projects from concept through to completion. Provide technical guidance and mentorship to junior engineers and technicians. Liaise with clients, architects, and other stakeholders to ensure project requirements are met. Ensure compliance with relevant regulations, standards, and sustainability targets. Attend design meetings and contribute to project planning and strategy. Requirements Minimum 7 years experience in mechanical design within a Building Services consultancy environment . Degree educated in Mechanical Engineering or a related discipline. Strong knowledge of mechanical building services design and industry standards. Experience delivering projects across sectors such as commercial, residential, healthcare, or education. Proficiency in relevant design software (e.g., AutoCAD, Revit) Excellent communication and leadership skills. Ability to manage multiple projects and work collaboratively within a team. What s on Offer Competitive salary of up to £60,000 depending on experience. Comprehensive benefits package. Hybrid working arrangement for improved work life balance. Opportunities for professional development and career progression. Supportive and collaborative working environment. How to Apply If you are a driven Mechanical Design Engineer looking to step into a Principal role within a dynamic consultancy, we would love to hear from you. Please submit your CV and a brief cover letter outlining your experience and suitability for the role. (url removed) or call (phone number removed)
09/03/2026
Full time
Principal Mechanical Design Engineer Hybrid Working (Office & Remote) Up to £60,000 Excellent Benefits Package Full-Time, Permanent About the Role We are seeking an experienced and motivated Principal Mechanical Design Engineer to join our growing Building Services consultancy. This is an exciting opportunity for a skilled engineer to take a leading role in the design and delivery of high-quality mechanical building services projects across a diverse portfolio. Working in a hybrid environment, you will collaborate with multidisciplinary teams, manage project delivery, and provide technical leadership to junior engineers while ensuring projects are delivered to the highest standards. Key Responsibilities Lead the mechanical design of building services systems including HVAC, heating, ventilation, and public health services. Produce and review detailed engineering designs, calculations, specifications, and technical reports. Manage and coordinate projects from concept through to completion. Provide technical guidance and mentorship to junior engineers and technicians. Liaise with clients, architects, and other stakeholders to ensure project requirements are met. Ensure compliance with relevant regulations, standards, and sustainability targets. Attend design meetings and contribute to project planning and strategy. Requirements Minimum 7 years experience in mechanical design within a Building Services consultancy environment . Degree educated in Mechanical Engineering or a related discipline. Strong knowledge of mechanical building services design and industry standards. Experience delivering projects across sectors such as commercial, residential, healthcare, or education. Proficiency in relevant design software (e.g., AutoCAD, Revit) Excellent communication and leadership skills. Ability to manage multiple projects and work collaboratively within a team. What s on Offer Competitive salary of up to £60,000 depending on experience. Comprehensive benefits package. Hybrid working arrangement for improved work life balance. Opportunities for professional development and career progression. Supportive and collaborative working environment. How to Apply If you are a driven Mechanical Design Engineer looking to step into a Principal role within a dynamic consultancy, we would love to hear from you. Please submit your CV and a brief cover letter outlining your experience and suitability for the role. (url removed) or call (phone number removed)
Senior Design Manager - Construction - Competitive salary package Your new company One of the UK's leading contractors with over a 100 years of experience. Operating across the UK in a number of sectors including: Construction, Residential, Fit Out, Maintenance and Engineering Your new role Working on a major expansion project in Cambridge, they are looking for a senior design manager to join the project team. Where you will be taking the project from pre-construction through to delivery. With a particular focus on the residential units of the project. Key Responsibilities: Lead and coordinate design activities across all stages, ensuring compliance with programme, scope, and budget Chair consultant and client-facing design meetings, producing clear action lists and tracking progress. Manage risk and identify opportunities for value engineering. Oversee design deliverables, including Principal Designer and supply chain CDP packages. Ensure robust change management and maintain transparent communication with stakeholders. Drive sustainability compliance. Support bid management processes and contribute to securing future parcels. Promote health, safety, wellbeing, and environmental excellence. What you'll need to succeed Proven experience leading design management on £50m+ projects within Tier 1 contractors. Strong knowledge of two-stage PCSA processes. Familiarity with sustainability KPIs. Proficient in BIM Level 2 Professional qualifications (RIBA, CIOB, RICS, CIAT, or equivalent). Ability to lead a team, mentor junior staff, and collaborate effectively with diverse stakeholders. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
07/03/2026
Full time
Senior Design Manager - Construction - Competitive salary package Your new company One of the UK's leading contractors with over a 100 years of experience. Operating across the UK in a number of sectors including: Construction, Residential, Fit Out, Maintenance and Engineering Your new role Working on a major expansion project in Cambridge, they are looking for a senior design manager to join the project team. Where you will be taking the project from pre-construction through to delivery. With a particular focus on the residential units of the project. Key Responsibilities: Lead and coordinate design activities across all stages, ensuring compliance with programme, scope, and budget Chair consultant and client-facing design meetings, producing clear action lists and tracking progress. Manage risk and identify opportunities for value engineering. Oversee design deliverables, including Principal Designer and supply chain CDP packages. Ensure robust change management and maintain transparent communication with stakeholders. Drive sustainability compliance. Support bid management processes and contribute to securing future parcels. Promote health, safety, wellbeing, and environmental excellence. What you'll need to succeed Proven experience leading design management on £50m+ projects within Tier 1 contractors. Strong knowledge of two-stage PCSA processes. Familiarity with sustainability KPIs. Proficient in BIM Level 2 Professional qualifications (RIBA, CIOB, RICS, CIAT, or equivalent). Ability to lead a team, mentor junior staff, and collaborate effectively with diverse stakeholders. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
A growing multidisciplinary property and construction consultancy is seeking an experienced Fire Engineer to support the continued development of their Building Safety and Fire service. This opportunity would suit a motivated Fire Engineer at Senior, Principal or Associate level who is looking to contribute to a developing service within a well-established consultancy environment. The successful Fire Engineer will work alongside an experienced service lead, supporting clients across the full lifecycle of property assets including acquisition, design, construction, refurbishment and occupation. The Fire Engineer will provide specialist advice on fire safety and regulatory compliance while supporting clients with complex building safety challenges in line with evolving UK legislation. The Fire Engineer's Role Producing fire safety strategies and technical reports for a range of building types Supporting Planning Gateway One submissions and fire statements Delivering construction stage fire risk assessments and compliance reviews Completing lender due diligence related to fire safety and building risk Preparing Fire and Emergency Files and building Safety Case documentation Undertaking compartmentation, fire stopping and fire door surveys Completing EWS1 assessments and Fire Risk Appraisals of External Walls (FRAEW) Monitoring projects to ensure compliance with building safety legislation and guidance Supporting multidisciplinary teams to deliver integrated project solutions Assisting with client engagement and proposal preparation The Fire Engineer Degree qualified in Fire Engineering, Fire Safety Engineering, or a related discipline Experience delivering fire engineering or fire safety consultancy services Strong knowledge of UK fire legislation and building safety guidance Experience with fire strategies, fire risk assessments, or fa ade fire assessments Chartered Engineer status desirable (support available for chartership) Experience working within a consultancy or multidisciplinary environment Strong communication, client-facing and report writing skills In Return? 45,000+ Hybrid working Exposure to complex building safety and fire engineering projects Clear career progression within an expanding fire consultancy team This role would suit an experienced Fire Engineer looking to play a key role in shaping a growing fire safety consultancy service while working on varied projects across the property lifecycle. If you are Fire Safety Professional considering your career opportunities, then contact Lauren Banks at Brandon James on (phone number removed). Ref: 21520 Fire Engineer / Senior Fire Engineer / Principal Fire Engineer / Associate Fire Engineer / Fire Engineering / Fire Strategy / FRAEW / EWS1 / Building Safety Act / Fire Safety Consultancy / Fire Risk Assessment / ADB / BS 9999 / BS 9991 / Chartered Fire Engineer / IFE / Fire Safety Compliance / Building Safety / Fire Engineering Consultancy
07/03/2026
Full time
A growing multidisciplinary property and construction consultancy is seeking an experienced Fire Engineer to support the continued development of their Building Safety and Fire service. This opportunity would suit a motivated Fire Engineer at Senior, Principal or Associate level who is looking to contribute to a developing service within a well-established consultancy environment. The successful Fire Engineer will work alongside an experienced service lead, supporting clients across the full lifecycle of property assets including acquisition, design, construction, refurbishment and occupation. The Fire Engineer will provide specialist advice on fire safety and regulatory compliance while supporting clients with complex building safety challenges in line with evolving UK legislation. The Fire Engineer's Role Producing fire safety strategies and technical reports for a range of building types Supporting Planning Gateway One submissions and fire statements Delivering construction stage fire risk assessments and compliance reviews Completing lender due diligence related to fire safety and building risk Preparing Fire and Emergency Files and building Safety Case documentation Undertaking compartmentation, fire stopping and fire door surveys Completing EWS1 assessments and Fire Risk Appraisals of External Walls (FRAEW) Monitoring projects to ensure compliance with building safety legislation and guidance Supporting multidisciplinary teams to deliver integrated project solutions Assisting with client engagement and proposal preparation The Fire Engineer Degree qualified in Fire Engineering, Fire Safety Engineering, or a related discipline Experience delivering fire engineering or fire safety consultancy services Strong knowledge of UK fire legislation and building safety guidance Experience with fire strategies, fire risk assessments, or fa ade fire assessments Chartered Engineer status desirable (support available for chartership) Experience working within a consultancy or multidisciplinary environment Strong communication, client-facing and report writing skills In Return? 45,000+ Hybrid working Exposure to complex building safety and fire engineering projects Clear career progression within an expanding fire consultancy team This role would suit an experienced Fire Engineer looking to play a key role in shaping a growing fire safety consultancy service while working on varied projects across the property lifecycle. If you are Fire Safety Professional considering your career opportunities, then contact Lauren Banks at Brandon James on (phone number removed). Ref: 21520 Fire Engineer / Senior Fire Engineer / Principal Fire Engineer / Associate Fire Engineer / Fire Engineering / Fire Strategy / FRAEW / EWS1 / Building Safety Act / Fire Safety Consultancy / Fire Risk Assessment / ADB / BS 9999 / BS 9991 / Chartered Fire Engineer / IFE / Fire Safety Compliance / Building Safety / Fire Engineering Consultancy
Your new company One of the UK's leading contractors with over a 100 years of experience. Operating across the UK in a number of sectors including: Construction, Residential, Fit Out, Maintenance and Engineering Your new role Working on a major expansion project in Cambridge, they are looking for a senior design manager to join the project team. Where you will be taking the project from pre-construction through to delivery. With a particular focus on the residential units of the project. Key Responsibilities: Lead and coordinate design activities across all stages, ensuring compliance with programme, scope, and budget Chair consultant and client-facing design meetings, producing clear action lists and tracking progress. Manage risk and identify opportunities for value engineering. Oversee design deliverables, including Principal Designer and supply chain CDP packages. Ensure robust change management and maintain transparent communication with stakeholders. Drive sustainability compliance. Support bid management processes and contribute to securing future parcels. Promote health, safety, wellbeing, and environmental excellence. What you'll need to succeed Proven experience leading design management on 50m+ projects within Tier 1 contractors. Strong knowledge of two-stage PCSA processes. Familiarity with sustainability KPIs. Proficient in BIM Level 2 Professional qualifications (RIBA, CIOB, RICS, CIAT, or equivalent). Ability to lead a team, mentor junior staff, and collaborate effectively with diverse stakeholders. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
06/03/2026
Full time
Your new company One of the UK's leading contractors with over a 100 years of experience. Operating across the UK in a number of sectors including: Construction, Residential, Fit Out, Maintenance and Engineering Your new role Working on a major expansion project in Cambridge, they are looking for a senior design manager to join the project team. Where you will be taking the project from pre-construction through to delivery. With a particular focus on the residential units of the project. Key Responsibilities: Lead and coordinate design activities across all stages, ensuring compliance with programme, scope, and budget Chair consultant and client-facing design meetings, producing clear action lists and tracking progress. Manage risk and identify opportunities for value engineering. Oversee design deliverables, including Principal Designer and supply chain CDP packages. Ensure robust change management and maintain transparent communication with stakeholders. Drive sustainability compliance. Support bid management processes and contribute to securing future parcels. Promote health, safety, wellbeing, and environmental excellence. What you'll need to succeed Proven experience leading design management on 50m+ projects within Tier 1 contractors. Strong knowledge of two-stage PCSA processes. Familiarity with sustainability KPIs. Proficient in BIM Level 2 Professional qualifications (RIBA, CIOB, RICS, CIAT, or equivalent). Ability to lead a team, mentor junior staff, and collaborate effectively with diverse stakeholders. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Senior / Principal Mechanical Design Engineer required for leading West Midlands Consultancy Operating for almost 20 years, my client has been providing high quality Mechanical, Electrical and Public Health Design services for the built environment. Based from their offices in the West Midlands, they are involved in the following sectors: Commercial Education Healthcare Leisure Listed Buildings Residential Retail Transport Due to an increase in demand for their services they are looking to recruit a Senior Mechanical Design Engineer to replace a long serving engineer who is leaving the industry. You will be a key part of the delivery team and will be required to manage your own technical input, as well as that of others, and to demonstrate your understanding of the role that your work plays in the delivery of the projects as a whole. You will need an understanding of the financial and commercial considerations that affect project delivery, and be able to provide accurate and relevant reports on progress of the work against time and budgetary targets, together with being responsible for invoicing respective projects with the accounts department. You must be: A competent designer with experience in the Mechanical service design of a range of projects and sectors. Degree qualified (or close to achieving qualification) in Building Services Engineering or Mechanical discipline. Chartered status (or looking to start the process) through IMechE, CIBSE or MIEI Competent design software and IT skills Experience of mentoring junior staff GR Associates is a specialist in Building Services Recruitment and have a range of posts available. If you are seeking a career move but this position is not right for you please browse the other vacancies on our website. We also welcome speculative applications.
06/03/2026
Full time
Senior / Principal Mechanical Design Engineer required for leading West Midlands Consultancy Operating for almost 20 years, my client has been providing high quality Mechanical, Electrical and Public Health Design services for the built environment. Based from their offices in the West Midlands, they are involved in the following sectors: Commercial Education Healthcare Leisure Listed Buildings Residential Retail Transport Due to an increase in demand for their services they are looking to recruit a Senior Mechanical Design Engineer to replace a long serving engineer who is leaving the industry. You will be a key part of the delivery team and will be required to manage your own technical input, as well as that of others, and to demonstrate your understanding of the role that your work plays in the delivery of the projects as a whole. You will need an understanding of the financial and commercial considerations that affect project delivery, and be able to provide accurate and relevant reports on progress of the work against time and budgetary targets, together with being responsible for invoicing respective projects with the accounts department. You must be: A competent designer with experience in the Mechanical service design of a range of projects and sectors. Degree qualified (or close to achieving qualification) in Building Services Engineering or Mechanical discipline. Chartered status (or looking to start the process) through IMechE, CIBSE or MIEI Competent design software and IT skills Experience of mentoring junior staff GR Associates is a specialist in Building Services Recruitment and have a range of posts available. If you are seeking a career move but this position is not right for you please browse the other vacancies on our website. We also welcome speculative applications.
Our client, a leading company in the water engineering sector, is currently seeking a Senior / Principal Civil Engineer to join their team on a contract basis for the design of a clean water treatment works. Key Responsibilities: Designing and overseeing the construction of a clean water treatment works Ensuring compliance with industry standards and regulations Collaborating with multidisciplinary teams to optimise project outcomes Providing technical guidance and mentorship to junior engineers Preparing detailed design specifications and technical reports Conducting site assessments and feasibility studies Monitoring project progress and ensuring timely delivery Managing project budgets and resources effectively Job Requirements: Extensive experience in civil engineering within the water sector Proficiency in designing water treatment works In-depth understanding of civil engineering principles and practices Excellent problem-solving and analytical skills Strong written and verbal communication abilities Ability to work collaboratively within a team Relevant degree in Civil Engineering or equivalent qualification Benefits: Opportunities to work on impactful and complex projects Supportive and professional work environment Potential for professional development and growth If you are a seasoned Senior Civil Engineer with a passion for water treatment projects, we would love to hear from you. Apply now to be a part of our client's dedicated team.
06/03/2026
Contract
Our client, a leading company in the water engineering sector, is currently seeking a Senior / Principal Civil Engineer to join their team on a contract basis for the design of a clean water treatment works. Key Responsibilities: Designing and overseeing the construction of a clean water treatment works Ensuring compliance with industry standards and regulations Collaborating with multidisciplinary teams to optimise project outcomes Providing technical guidance and mentorship to junior engineers Preparing detailed design specifications and technical reports Conducting site assessments and feasibility studies Monitoring project progress and ensuring timely delivery Managing project budgets and resources effectively Job Requirements: Extensive experience in civil engineering within the water sector Proficiency in designing water treatment works In-depth understanding of civil engineering principles and practices Excellent problem-solving and analytical skills Strong written and verbal communication abilities Ability to work collaboratively within a team Relevant degree in Civil Engineering or equivalent qualification Benefits: Opportunities to work on impactful and complex projects Supportive and professional work environment Potential for professional development and growth If you are a seasoned Senior Civil Engineer with a passion for water treatment projects, we would love to hear from you. Apply now to be a part of our client's dedicated team.
Principal Designer Building Regulations Salary: £50,000 £60,000 + excellent benefits Shape the future of building safety. A growing construction consultancy is looking for an experienced Principal Designer (Building Regulations) to join their team. This is a fantastic opportunity to play a key role in delivering projects in line with the Building Safety Act, advising clients and design teams while ensuring compliance throughout the design and delivery process. This is an opportunity for someone who enjoys working client-facing, influencing design decisions, and shaping safe, compliant buildings from concept through to completion. Salary & Benefits £55,000 £60,000 salary (depending on experience). Fully remote Hybrid / flexible working. 20 days holiday + bank holidays increasing by one day a year upto 25 days. Company pension scheme. Professional membership fees paid. Ongoing CPD and training support. Clear career progression opportunities. Supportive and collaborative team environment. The Role As a Building Regulations Principal Designer, you will play a key role in supporting clients and design teams in navigating the evolving building safety landscape. Key responsibilities include: Acting as Principal Designer under the Building Safety Act and Building Regulations. Advising clients and project teams on Building Safety Act compliance. Coordinating design teams to ensure regulatory compliance throughout all project stages. Managing and maintaining design compliance trackers and documentation. Supporting Gateway submissions and Building Safety Regulator engagement. Ensuring the Golden Thread of information is maintained. Leading or attending client and design team meetings to provide regulatory guidance. Reviewing design information to confirm compliance with current legislation. Coordinating with architects, engineers, contractors and specialist consultants. Supporting High-Risk Building (HRB) projects where required. Carrying out site inspections where necessary. Contributing to bid submissions and business development activities. Requirements To be considered for the role, you will ideally have: A degree in Architecture, Building Control, Building Surveying, Engineering or a related discipline. Strong knowledge of the Building Safety Act 2022 and current Building Regulations. Experience working in a design, building control or compliance-based role. Understanding of the design and construction process across multiple RIBA stages. Experience coordinating with multidisciplinary design teams. Strong communication skills and confidence in client-facing environments. Desirable: Professional membership with RICS, CABE, RIBA, CIAT, CIOB, APS or similar. Experience working on High-Risk Buildings (HRBs). Experience using CAD or Revit. NEBOSH or similar health and safety qualification. Employment Type This role is offered on a permanent basis, however the business would also consider freelance candidates operating outside IR35. Want to know more? Contact (url removed) (phone number removed).
05/03/2026
Full time
Principal Designer Building Regulations Salary: £50,000 £60,000 + excellent benefits Shape the future of building safety. A growing construction consultancy is looking for an experienced Principal Designer (Building Regulations) to join their team. This is a fantastic opportunity to play a key role in delivering projects in line with the Building Safety Act, advising clients and design teams while ensuring compliance throughout the design and delivery process. This is an opportunity for someone who enjoys working client-facing, influencing design decisions, and shaping safe, compliant buildings from concept through to completion. Salary & Benefits £55,000 £60,000 salary (depending on experience). Fully remote Hybrid / flexible working. 20 days holiday + bank holidays increasing by one day a year upto 25 days. Company pension scheme. Professional membership fees paid. Ongoing CPD and training support. Clear career progression opportunities. Supportive and collaborative team environment. The Role As a Building Regulations Principal Designer, you will play a key role in supporting clients and design teams in navigating the evolving building safety landscape. Key responsibilities include: Acting as Principal Designer under the Building Safety Act and Building Regulations. Advising clients and project teams on Building Safety Act compliance. Coordinating design teams to ensure regulatory compliance throughout all project stages. Managing and maintaining design compliance trackers and documentation. Supporting Gateway submissions and Building Safety Regulator engagement. Ensuring the Golden Thread of information is maintained. Leading or attending client and design team meetings to provide regulatory guidance. Reviewing design information to confirm compliance with current legislation. Coordinating with architects, engineers, contractors and specialist consultants. Supporting High-Risk Building (HRB) projects where required. Carrying out site inspections where necessary. Contributing to bid submissions and business development activities. Requirements To be considered for the role, you will ideally have: A degree in Architecture, Building Control, Building Surveying, Engineering or a related discipline. Strong knowledge of the Building Safety Act 2022 and current Building Regulations. Experience working in a design, building control or compliance-based role. Understanding of the design and construction process across multiple RIBA stages. Experience coordinating with multidisciplinary design teams. Strong communication skills and confidence in client-facing environments. Desirable: Professional membership with RICS, CABE, RIBA, CIAT, CIOB, APS or similar. Experience working on High-Risk Buildings (HRBs). Experience using CAD or Revit. NEBOSH or similar health and safety qualification. Employment Type This role is offered on a permanent basis, however the business would also consider freelance candidates operating outside IR35. Want to know more? Contact (url removed) (phone number removed).
Design Manager required to work for Principal Contractor JV on High Speed Rail Major Tunnels Programme. Contract initially up to end of Oct 2026 - Inside IR35 Old Oak Common/North Acton - Hybrid Working Arrangements Skillset: Design Management, Fitout, Engineering, Construction. Role Brief: This Design Manager will manage the Stage 5 asset design and be responsible for leading and coordinating all design and disciplines associated with a particular asset, facilitate the delivery of the designs, ensuring the design is technically assured, delivered to programme and coordinated between design disciplines. Candidates for the role must have a proven experience of large-scale civil engineering projects. Your previous/background experience will likely have been within Design and Engineering Project Management. You will have a good knowledge of construction techniques and processes across shafts and head house structures, above and below ground with a focus on shaft fit-out and architectural design, with an appreciation of both temporary and permanent MEP as well as rail systems activities. Main Responsibilities -Leading on all things design for their particular asset, liaising with the Stage 4 close out team and assisting elsewhere when required. -Management for their asset of all Design activities related to the shaft fit out incl. blockwork, fire-proofing, steelwork, doors, hatches, drainage, etc. and architectural design of the shafts and headhouses incl. misc. steel works, façade/cladding, roofing systems. You will also be involved with the integration of MEP systems. -Liaison with design consultant, MEP team, Design Integrator, Engineering team, Construction team, QA team, Commercial team, Planning team and Cost control to provide relevant design input as required. -Review Technical Queries (TQs)/RFIs, FCDs and NCRs as required, as well as Material Compliance Records (MCRs). -Management of Design integration and change control during construction. -Promote best practice in safety management through application of risk assessment, and ensuring CDM 2015 regulations are considered in the design and challenging the designer when required. Experience Required: -Educated to degree level or higher (preferably BEng or higher (MEng, MSc) and hold a relevant professional qualification. -Experience in project-based design and management across all project stages. -Good knowledge of construction of shafts and headhouses with focus on fit-out and architectural elements, along with MEP interfaces. -Experience of large complex projects where involvement with multi-discipline integration was required. -Good understanding of the NEC contract and have experience in its application. -Have an appreciation of BIM and the 3D environment, and have an understanding of digital engineering in design, construction and handover phases. -Thorough understanding of managing design related project risks. -Thorough understanding and application of the CDM Regulations 2015. -Strong understanding of Engineering Principles and extensive technical knowledge of construction techniques and best practices
05/03/2026
Contract
Design Manager required to work for Principal Contractor JV on High Speed Rail Major Tunnels Programme. Contract initially up to end of Oct 2026 - Inside IR35 Old Oak Common/North Acton - Hybrid Working Arrangements Skillset: Design Management, Fitout, Engineering, Construction. Role Brief: This Design Manager will manage the Stage 5 asset design and be responsible for leading and coordinating all design and disciplines associated with a particular asset, facilitate the delivery of the designs, ensuring the design is technically assured, delivered to programme and coordinated between design disciplines. Candidates for the role must have a proven experience of large-scale civil engineering projects. Your previous/background experience will likely have been within Design and Engineering Project Management. You will have a good knowledge of construction techniques and processes across shafts and head house structures, above and below ground with a focus on shaft fit-out and architectural design, with an appreciation of both temporary and permanent MEP as well as rail systems activities. Main Responsibilities -Leading on all things design for their particular asset, liaising with the Stage 4 close out team and assisting elsewhere when required. -Management for their asset of all Design activities related to the shaft fit out incl. blockwork, fire-proofing, steelwork, doors, hatches, drainage, etc. and architectural design of the shafts and headhouses incl. misc. steel works, façade/cladding, roofing systems. You will also be involved with the integration of MEP systems. -Liaison with design consultant, MEP team, Design Integrator, Engineering team, Construction team, QA team, Commercial team, Planning team and Cost control to provide relevant design input as required. -Review Technical Queries (TQs)/RFIs, FCDs and NCRs as required, as well as Material Compliance Records (MCRs). -Management of Design integration and change control during construction. -Promote best practice in safety management through application of risk assessment, and ensuring CDM 2015 regulations are considered in the design and challenging the designer when required. Experience Required: -Educated to degree level or higher (preferably BEng or higher (MEng, MSc) and hold a relevant professional qualification. -Experience in project-based design and management across all project stages. -Good knowledge of construction of shafts and headhouses with focus on fit-out and architectural elements, along with MEP interfaces. -Experience of large complex projects where involvement with multi-discipline integration was required. -Good understanding of the NEC contract and have experience in its application. -Have an appreciation of BIM and the 3D environment, and have an understanding of digital engineering in design, construction and handover phases. -Thorough understanding of managing design related project risks. -Thorough understanding and application of the CDM Regulations 2015. -Strong understanding of Engineering Principles and extensive technical knowledge of construction techniques and best practices
Join a global leader in building and engineering solutions as part of a growing Health & Safety team delivering CDM Advisory and Principal Designer services across major buildings and infrastructure frameworks. This is a Health & Safety Consultant position with hybrid working out of the Cambridge office. In this role you will work closely with inhouse design teams to carry out design risk reviews, as well as undertaking the full suite of services associated with CDM consultancy. The role offers a variety of desk and site-based work, as well as the opportunity to deliver H&S and CDM training. To be successful in this role, you will need to have clear construction safety experience and an understanding of design safety, ideally having worked in a consultancy or a contractor environment. You will be joining a dynamic team with a mix of specialisms, and you'll have exposure to a varied client base offering unique and complex projects to deliver. For more information about the company and wider benefits call Dominic Jacques on (phone number removed)
05/03/2026
Full time
Join a global leader in building and engineering solutions as part of a growing Health & Safety team delivering CDM Advisory and Principal Designer services across major buildings and infrastructure frameworks. This is a Health & Safety Consultant position with hybrid working out of the Cambridge office. In this role you will work closely with inhouse design teams to carry out design risk reviews, as well as undertaking the full suite of services associated with CDM consultancy. The role offers a variety of desk and site-based work, as well as the opportunity to deliver H&S and CDM training. To be successful in this role, you will need to have clear construction safety experience and an understanding of design safety, ideally having worked in a consultancy or a contractor environment. You will be joining a dynamic team with a mix of specialisms, and you'll have exposure to a varied client base offering unique and complex projects to deliver. For more information about the company and wider benefits call Dominic Jacques on (phone number removed)
Our client are looking for an experienced Senior Design Manager is sought to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What they Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.
04/03/2026
Full time
Our client are looking for an experienced Senior Design Manager is sought to lead the design and technical aspects of facades and cladding projects. You will manage internal teams and external consultants, ensuring projects are delivered on time, on budget, and to the highest quality standards. This role requires strong technical knowledge, leadership, and the ability to coordinate complex designs while complying with regulations and company standards. Key Responsibilities Lead and manage design teams, subcontractors, and consultants throughout design, procurement, and construction phases. Ensure designs are fully coordinated, compliant with regulations, and meet company standards. Develop, manage, and monitor project-specific design programmes and budgets. Review and approve technical submissions, alternative build methods, and value engineering opportunities. Manage design-related communications with Commercial, Operations, and Client teams. Oversee document control, design approvals, and change management processes. Attend site visits and meetings to monitor construction and ensure design compliance. Ensure timely completion of handover documentation, including O&M manuals, H&S files, and resident packs. Fulfil CDM Principal Designer responsibilities and other regulatory duties as required. Requirements Proven experience managing all aspects of design and technical processes in residential or high-rise projects. Strong leadership, organisational, and communication skills. In-depth knowledge of facades, cladding, construction methods, and legislation, including the Building Safety Act. Competent in CAD software (AutoCAD/Revit) and BIM processes. Professional membership (CIOB, CIAT, RICS) and minimum Level 4 architectural or equivalent construction/design qualification. Valid driving licence and ability to travel to sites as required. Personal Qualities Proactive, solutions-oriented, and able to work under pressure. Confident, resourceful, and a collaborative team player. Passionate about technical excellence, innovation, and sustainability. Strong analytical skills and attention to detail. What they Offer Full training and ongoing professional development. Opportunities to progress skills in commercial systems, compliance, and business operations. A supportive, collaborative, and professional working environment. Clear career progression within the company.
Site Agent Civil Engineering Boyd Recruitment Boyd Recruitment are currently recruiting for an experienced Site Agent on behalf of one of our leading civil engineering contractors. This is a site-based role working on a range of infrastructure and civil engineering projects across Scotland, with the potential for working away from home depending on project location. This position would suit an individual currently operating at Site Manager / Agent / Sub Agent level , or someone ready to take the next step into a more senior site leadership role. The Role As Site Agent, you will be responsible for the safe, efficient, and commercially aware delivery of works on site. You will act as the Responsible Person, managing daily construction activities, coordinating site teams and subcontractors, and acting as a key point of contact between the client, engineer, and wider project team. Depending on project size and complexity, you may take full ownership of site delivery or support a Senior Agent on larger schemes. Key Responsibilities Health, Safety & Environmental Act as Principal Contractor on site, ensuring compliance with CDM Regulations, H&S legislation, ACoPs, and company procedures Prepare and manage Construction Phase Plans, RAMS, inductions, toolbox talks, and daily task briefings Carry out site safety audits and manage subcontractor compliance Manage environmental controls including CEMPs, Peat Management Plans, Pollution Prevention Plans, and liaison with SEPA Site & Programme Management Plan, organise, and manage day-to-day site operations Produce and monitor construction programmes using Asta Powerproject, Primavera P6, or Microsoft Project Prepare 2 4 week lookahead programmes and short-term plans Identify and resolve technical or construction issues to maintain programme and cost control Quality Assurance Ensure works are delivered in line with drawings, specifications, and industry standards Implement and manage ITPs and Quality Management Plans Ensure inspections are carried out and quality records maintained Commercial & Procurement Procure and manage subcontractors, plant, labour, and materials from site Monitor costs on a weekly and monthly basis and contribute to CVRs and applications for payment Assist in identifying variations and additional works Ensure appropriate records and evidence are provided to support valuations Stakeholder Management Act as a key point of contact for the client, engineer, and statutory bodies Attend pre-start, weekly, and monthly progress meetings Liaise with SEPA, Scottish Water, SPEN, local authorities, and utility providers Manage site communications and ensure contractual notices and instructions are handled correctly Leadership & Team Management Manage, mentor, and support site engineers, foremen, and subcontractors Coordinate resources efficiently to meet programme requirements On larger projects, support or manage sub-agents or section leads Design & Documentation Review contract documentation and ensure contractual obligations are met Manage design development on Design & Construct projects alongside designers and subcontractors Ensure timely production and submission of project documentation including CPPs, RAMS, ITPs, H&S File inputs, and O&M manuals Candidate Requirements Degree or HND in Civil Engineering (or equivalent experience) Proven experience in a Site Manager, Agent, or Sub Agent role within civil engineering Strong understanding of H&S legislation, quality systems, and construction contracts Commercial awareness with experience contributing to cost control and forecasting Strong communication and leadership skills Flexibility to work away from home where required For more information or a confidential discussion, please contact Boyd Recruitment.
04/03/2026
Full time
Site Agent Civil Engineering Boyd Recruitment Boyd Recruitment are currently recruiting for an experienced Site Agent on behalf of one of our leading civil engineering contractors. This is a site-based role working on a range of infrastructure and civil engineering projects across Scotland, with the potential for working away from home depending on project location. This position would suit an individual currently operating at Site Manager / Agent / Sub Agent level , or someone ready to take the next step into a more senior site leadership role. The Role As Site Agent, you will be responsible for the safe, efficient, and commercially aware delivery of works on site. You will act as the Responsible Person, managing daily construction activities, coordinating site teams and subcontractors, and acting as a key point of contact between the client, engineer, and wider project team. Depending on project size and complexity, you may take full ownership of site delivery or support a Senior Agent on larger schemes. Key Responsibilities Health, Safety & Environmental Act as Principal Contractor on site, ensuring compliance with CDM Regulations, H&S legislation, ACoPs, and company procedures Prepare and manage Construction Phase Plans, RAMS, inductions, toolbox talks, and daily task briefings Carry out site safety audits and manage subcontractor compliance Manage environmental controls including CEMPs, Peat Management Plans, Pollution Prevention Plans, and liaison with SEPA Site & Programme Management Plan, organise, and manage day-to-day site operations Produce and monitor construction programmes using Asta Powerproject, Primavera P6, or Microsoft Project Prepare 2 4 week lookahead programmes and short-term plans Identify and resolve technical or construction issues to maintain programme and cost control Quality Assurance Ensure works are delivered in line with drawings, specifications, and industry standards Implement and manage ITPs and Quality Management Plans Ensure inspections are carried out and quality records maintained Commercial & Procurement Procure and manage subcontractors, plant, labour, and materials from site Monitor costs on a weekly and monthly basis and contribute to CVRs and applications for payment Assist in identifying variations and additional works Ensure appropriate records and evidence are provided to support valuations Stakeholder Management Act as a key point of contact for the client, engineer, and statutory bodies Attend pre-start, weekly, and monthly progress meetings Liaise with SEPA, Scottish Water, SPEN, local authorities, and utility providers Manage site communications and ensure contractual notices and instructions are handled correctly Leadership & Team Management Manage, mentor, and support site engineers, foremen, and subcontractors Coordinate resources efficiently to meet programme requirements On larger projects, support or manage sub-agents or section leads Design & Documentation Review contract documentation and ensure contractual obligations are met Manage design development on Design & Construct projects alongside designers and subcontractors Ensure timely production and submission of project documentation including CPPs, RAMS, ITPs, H&S File inputs, and O&M manuals Candidate Requirements Degree or HND in Civil Engineering (or equivalent experience) Proven experience in a Site Manager, Agent, or Sub Agent role within civil engineering Strong understanding of H&S legislation, quality systems, and construction contracts Commercial awareness with experience contributing to cost control and forecasting Strong communication and leadership skills Flexibility to work away from home where required For more information or a confidential discussion, please contact Boyd Recruitment.
Our client is a multidisciplinary building consultancy and fire engineering practice operating across the UK and Europe. They combine chartered building surveying, architectural design, principal designer and project management services with specialist fire safety expertise. The business focuses on technical quality over volume, providing tailored, defensible advice across residential, commercial and mixed-use portfolios. Senior Fire Risk Assessor Salary & Benefits: Salary: 40,000 - 55,000 25 days holiday + bank holidays, plus Christmas closure Private healthcare (after probation) + employee assistance programme Life assurance (3x salary) Fully funded training and professional development Support with APC, CPD and professional qualifications Employee perks (Spectrum Life + Extras), Cycle to Work and free eye tests Flexible working (2 days office-based, remainder on-site across Glasgow, Edinburgh and Aberdeen) Senior Fire Risk Assessor Job Overview: A leading multidisciplinary consultancy is seeking a Senior Fire Risk Assessor to join its Fire Safety team, delivering high-quality, compliance-led fire risk assessments across residential, mixed-use and commercial portfolios, including Higher-Risk Buildings (HRBs). This senior role offers the opportunity to take ownership of your own portfolio while mentoring junior assessors and contributing to quality assurance within a BAFE SP205-accredited environment. The successful candidate will have strong technical judgement, excellent report writing skills and the confidence to lead complex residential assessments independently. Senior Fire Risk Assessor Job Requirements: Level 4 Diploma in Fire Risk Assessment (Ofqual regulated) Minimum 5 years' experience delivering fire risk assessments, including complex residential work independently MIFSM and CFRAR Tier 2 (minimum) Proven ability to lead Type 1-4 fire risk assessments Strong working knowledge of: PAS 79-1, BS 9992, PAS 9980 and BS 8674:2025 Fire (Scotland) Act 2005, RRFSO 2005 and Fire Safety Act 2021 Excellent technical report writing and client communication skills Ability to manage workload and deliver to deadlines Desirable: NAFRAR Tier 3, BAFE SP205 Validator, or IFE membership (or working towards) FRAEW experience or exposure to Single Building Assessments (Scotland) Experience with complex residential portfolios and HRB compliance work This role is ideal for an experienced fire risk professional who values technical quality, independence and consistency of delivery, and is looking to contribute to the ongoing success of a respected, compliance-led consultancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
03/03/2026
Full time
Our client is a multidisciplinary building consultancy and fire engineering practice operating across the UK and Europe. They combine chartered building surveying, architectural design, principal designer and project management services with specialist fire safety expertise. The business focuses on technical quality over volume, providing tailored, defensible advice across residential, commercial and mixed-use portfolios. Senior Fire Risk Assessor Salary & Benefits: Salary: 40,000 - 55,000 25 days holiday + bank holidays, plus Christmas closure Private healthcare (after probation) + employee assistance programme Life assurance (3x salary) Fully funded training and professional development Support with APC, CPD and professional qualifications Employee perks (Spectrum Life + Extras), Cycle to Work and free eye tests Flexible working (2 days office-based, remainder on-site across Glasgow, Edinburgh and Aberdeen) Senior Fire Risk Assessor Job Overview: A leading multidisciplinary consultancy is seeking a Senior Fire Risk Assessor to join its Fire Safety team, delivering high-quality, compliance-led fire risk assessments across residential, mixed-use and commercial portfolios, including Higher-Risk Buildings (HRBs). This senior role offers the opportunity to take ownership of your own portfolio while mentoring junior assessors and contributing to quality assurance within a BAFE SP205-accredited environment. The successful candidate will have strong technical judgement, excellent report writing skills and the confidence to lead complex residential assessments independently. Senior Fire Risk Assessor Job Requirements: Level 4 Diploma in Fire Risk Assessment (Ofqual regulated) Minimum 5 years' experience delivering fire risk assessments, including complex residential work independently MIFSM and CFRAR Tier 2 (minimum) Proven ability to lead Type 1-4 fire risk assessments Strong working knowledge of: PAS 79-1, BS 9992, PAS 9980 and BS 8674:2025 Fire (Scotland) Act 2005, RRFSO 2005 and Fire Safety Act 2021 Excellent technical report writing and client communication skills Ability to manage workload and deliver to deadlines Desirable: NAFRAR Tier 3, BAFE SP205 Validator, or IFE membership (or working towards) FRAEW experience or exposure to Single Building Assessments (Scotland) Experience with complex residential portfolios and HRB compliance work This role is ideal for an experienced fire risk professional who values technical quality, independence and consistency of delivery, and is looking to contribute to the ongoing success of a respected, compliance-led consultancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Your new company This consultancy is a well-established building services engineering practice with a strong reputation for delivering efficient, technically robust, and sustainable design solutions. Operating across a wide range of sectors - including commercial, residential, industrial, education, and public-sector projects - the business is known for its collaborative culture, high technical standards, and commitment to low-energy, environmentally responsible engineering. Their Glasgow office continues to grow, offering senior engineers the opportunity to shape project outcomes, influence design strategy, and support business development. Your new role As a Principal Electrical Design Engineer, you will lead the delivery of electrical building services design across a diverse portfolio of projects. You will take technical ownership, mentor the electrical engineering team, and act as a key point of contact for clients and stakeholders. This position is ideal for an experienced senior engineer ready to progress into a more strategic, leadership-focused role within a supportive consultancy environment.Main Responsibilities: Lead electrical design on projects from feasibility through to detailed design and construction stages. Prepare and review design calculations, specifications, drawings, and technical reports. Provide technical leadership, supporting and mentoring junior and intermediate engineers. Attend client meetings, design workshops, and site inspections. Ensure designs meet regulatory requirements, industry standards, and best practice guidance. Contribute to project planning, fee proposals, and resource management. Support the wider leadership team in driving quality, consistency, and innovation within the electrical discipline. What you'll need to succeed Extensive experience in electrical building services design within a consultancy environment. Strong understanding of UK building regulations, BS 7671, and relevant industry standards. Proficiency in design software such as Amtech, Dialux/Relux, and CAD/Revit (beneficial). Ability to lead projects, manage workload, and coordinate effectively with multidisciplinary teams. Excellent communication and client-facing skills. Degree qualified in Electrical or Building Services Engineering. Chartered status (CEng) or working towards Chartership is highly advantageous. What you'll get in return Competitive salary reflective of your experience and leadership responsibilities. Hybrid working and flexible working arrangements. Clear pathway for career progression, including support towards Chartership if required. Exposure to a wide variety of projects and sectors. Supportive team culture with ongoing CPD and technical development. Comprehensive benefits package including pension and enhanced holiday allowance. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.If this job isn't quite right for you, but you are looking for a new position, please contact us using the details below for a confidential discussion about your career:Email: Mobile No.: Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
03/03/2026
Full time
Your new company This consultancy is a well-established building services engineering practice with a strong reputation for delivering efficient, technically robust, and sustainable design solutions. Operating across a wide range of sectors - including commercial, residential, industrial, education, and public-sector projects - the business is known for its collaborative culture, high technical standards, and commitment to low-energy, environmentally responsible engineering. Their Glasgow office continues to grow, offering senior engineers the opportunity to shape project outcomes, influence design strategy, and support business development. Your new role As a Principal Electrical Design Engineer, you will lead the delivery of electrical building services design across a diverse portfolio of projects. You will take technical ownership, mentor the electrical engineering team, and act as a key point of contact for clients and stakeholders. This position is ideal for an experienced senior engineer ready to progress into a more strategic, leadership-focused role within a supportive consultancy environment.Main Responsibilities: Lead electrical design on projects from feasibility through to detailed design and construction stages. Prepare and review design calculations, specifications, drawings, and technical reports. Provide technical leadership, supporting and mentoring junior and intermediate engineers. Attend client meetings, design workshops, and site inspections. Ensure designs meet regulatory requirements, industry standards, and best practice guidance. Contribute to project planning, fee proposals, and resource management. Support the wider leadership team in driving quality, consistency, and innovation within the electrical discipline. What you'll need to succeed Extensive experience in electrical building services design within a consultancy environment. Strong understanding of UK building regulations, BS 7671, and relevant industry standards. Proficiency in design software such as Amtech, Dialux/Relux, and CAD/Revit (beneficial). Ability to lead projects, manage workload, and coordinate effectively with multidisciplinary teams. Excellent communication and client-facing skills. Degree qualified in Electrical or Building Services Engineering. Chartered status (CEng) or working towards Chartership is highly advantageous. What you'll get in return Competitive salary reflective of your experience and leadership responsibilities. Hybrid working and flexible working arrangements. Clear pathway for career progression, including support towards Chartership if required. Exposure to a wide variety of projects and sectors. Supportive team culture with ongoing CPD and technical development. Comprehensive benefits package including pension and enhanced holiday allowance. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.If this job isn't quite right for you, but you are looking for a new position, please contact us using the details below for a confidential discussion about your career:Email: Mobile No.: Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Principal Structural Engineer St Helens Full-time Excellent Salary + Leadership Benefits An exciting opportunity has arisen for a Principal Structural Engineer to join a well-established and growing engineering consultancy in St Helens. With a strong reputation for delivering practical, high-quality structural solutions across residential, commercial, industrial, and public sector projects, the consultancy continues to expand its portfolio throughout the North West and beyond. We are now seeking an experienced and commercially aware Principal Structural Engineer to play a key leadership role within the business. The Role As Principal Structural Engineer, you will take technical and managerial responsibility for a range of structural projects, from concept design through to completion. You will lead project teams, maintain key client relationships, and contribute strategically to the ongoing development of the St Helens office. Key responsibilities include: Leading the design of structures in steel, reinforced concrete, timber, and masonry Overseeing technical delivery and quality assurance Managing project programmes, budgets, and resources Acting as the primary point of contact for key clients Mentoring and developing engineers and technicians Supporting business development and tender submissions Contributing to the strategic growth of the consultancy About You We are looking for a confident and commercially minded engineer who: Holds a degree in Civil or Structural Engineering Is Chartered (CEng) with IStructE or ICE Has extensive UK consultancy experience Demonstrates strong technical expertise and leadership capability Has a proven track record of managing projects and teams Communicates effectively with clients, contractors, and multidisciplinary teams What We Offer Highly competitive salary and benefits package Clear progression pathway to Associate/Director level Flexible working arrangements Autonomy and influence within a growing office Supportive and collaborative working culture Opportunity to shape the future direction of the St Helens team This is a fantastic opportunity for a driven Principal Structural Engineer looking to step into a senior leadership role within a respected consultancy, where your expertise and ambition will be genuinely valued. We also have similar roles in Wigan and Warrington. If you are ready to make a significant impact and advance your career, we would be delighted to hear from you. Please get in touch with MIKAELA today.
03/03/2026
Full time
Principal Structural Engineer St Helens Full-time Excellent Salary + Leadership Benefits An exciting opportunity has arisen for a Principal Structural Engineer to join a well-established and growing engineering consultancy in St Helens. With a strong reputation for delivering practical, high-quality structural solutions across residential, commercial, industrial, and public sector projects, the consultancy continues to expand its portfolio throughout the North West and beyond. We are now seeking an experienced and commercially aware Principal Structural Engineer to play a key leadership role within the business. The Role As Principal Structural Engineer, you will take technical and managerial responsibility for a range of structural projects, from concept design through to completion. You will lead project teams, maintain key client relationships, and contribute strategically to the ongoing development of the St Helens office. Key responsibilities include: Leading the design of structures in steel, reinforced concrete, timber, and masonry Overseeing technical delivery and quality assurance Managing project programmes, budgets, and resources Acting as the primary point of contact for key clients Mentoring and developing engineers and technicians Supporting business development and tender submissions Contributing to the strategic growth of the consultancy About You We are looking for a confident and commercially minded engineer who: Holds a degree in Civil or Structural Engineering Is Chartered (CEng) with IStructE or ICE Has extensive UK consultancy experience Demonstrates strong technical expertise and leadership capability Has a proven track record of managing projects and teams Communicates effectively with clients, contractors, and multidisciplinary teams What We Offer Highly competitive salary and benefits package Clear progression pathway to Associate/Director level Flexible working arrangements Autonomy and influence within a growing office Supportive and collaborative working culture Opportunity to shape the future direction of the St Helens team This is a fantastic opportunity for a driven Principal Structural Engineer looking to step into a senior leadership role within a respected consultancy, where your expertise and ambition will be genuinely valued. We also have similar roles in Wigan and Warrington. If you are ready to make a significant impact and advance your career, we would be delighted to hear from you. Please get in touch with MIKAELA today.
Pinnacle are recruiting for a Principal Design Engineer, who are Main Contractor, based out of Watford. The work will be on Temporary Works, specifically on Scaffolding. Duties: Lead the design and engineering phases of both permanent and temporary works, with a key focus on scaffolding, access platforms, edge protection, and associated temporary structures. Develop and review engineering designs, drawings, and specifications for scaffold systems and access solutions in compliance with TG20, SG4, and other relevant standards. Collaborate with multidisciplinary teams including site teams, architects, structural engineers, and specialist subcontractors to ensure scaffold designs meet operational and safety requirements. Provide technical guidance, support, and mentorship to junior engineers and scaffold coordinators. Conduct regular site visits and inspections to validate scaffold installations, assess compliance, and resolve design or safety issues. Participate in temporary works coordination meetings, risk assessments, and constructibility reviews. Ensure scaffold designs integrate seamlessly into overall project delivery plans and comply with CDM regulations and temporary works procedures. Experience Looking for someone with experience as a Lead Design Engineer within Temporary works and ideally within Scaffolding.
03/03/2026
Full time
Pinnacle are recruiting for a Principal Design Engineer, who are Main Contractor, based out of Watford. The work will be on Temporary Works, specifically on Scaffolding. Duties: Lead the design and engineering phases of both permanent and temporary works, with a key focus on scaffolding, access platforms, edge protection, and associated temporary structures. Develop and review engineering designs, drawings, and specifications for scaffold systems and access solutions in compliance with TG20, SG4, and other relevant standards. Collaborate with multidisciplinary teams including site teams, architects, structural engineers, and specialist subcontractors to ensure scaffold designs meet operational and safety requirements. Provide technical guidance, support, and mentorship to junior engineers and scaffold coordinators. Conduct regular site visits and inspections to validate scaffold installations, assess compliance, and resolve design or safety issues. Participate in temporary works coordination meetings, risk assessments, and constructibility reviews. Ensure scaffold designs integrate seamlessly into overall project delivery plans and comply with CDM regulations and temporary works procedures. Experience Looking for someone with experience as a Lead Design Engineer within Temporary works and ideally within Scaffolding.
Technical Manager - BMS Systems London (Covering southern region) Perm Competitive salary + Car/Car/Travel Allowance + Flexible Benefits Summary We have an exciting new opportunity for a Technical Manager, with in depth experience of building management systems, to join our team. This role will ideally be based in London office, but will cover the southern region so travel will be required. In this role you will lead, own and manage the technical risk and opportunities within the business, from inception through to project completion, and client handover, focussing on design optimisation, opportunity identification, and mitigation of technical risk. You will ensure technical compliance with works information, scope, project specification and legislation, undertaking technical management of both internal and external designs. This is a permanent staff position with NG Bailey. Some of the key deliverables in this role will include: Demonstrate appropriate health and safety leadership to ensure the safety first and foremost message is visible and alive throughout all activities. Lead the technical engineering management on internally and externally designed projects to successful completion, ensuring best value design, management of opportunities and risk mitigation. Provide technical advice and assistance to other areas of the business, and support business development from a technical perspective. Assist the Regional Design & Engineering Manager in the production of technical management fees for projects. Ensure the accuracy and integrity of technical management costs, values, and programme forecasts, seeking opportunities to suggest actions which mitigate risk and maximise profitability. Support the Principal Technical manager in the identification, delivery and attendance of CPDs, ensuring that the development of design/technical team's competence is maintained. Provide technical advice and assistance to other areas for the business Prepare monthly project reports for senior stakeholders, highlighting progress, risks, opportunities, and resource issues. Advise on commercial progress against plan, any variances from plan, and the corrective actions being taken. On external designs, take ownership of the completion of the responsibilities matrix, ensuring scope gaps are mitigated. Build and maintain mutually beneficial customer, key supplier and internal relationships. Promote the design team and actively seek out new opportunities Communicate proactively with project stakeholders to improve our collaboration with operational teams. Conduct regular independent design/technical reviews, ensuring designs are technically correct and represent best value, and comply with all legal and contractual requirements. Apply current legislation regarding building regulations, standards, CDM, quality control, commissioning, safety & environmental issues. What we're looking for : Extensive experience of building management systems Operational experience on project installation Good understanding of design and build, and traditional construction contracts Significant experience of commercial management on design projects Strong communication skills Qualifications or professional memberships (desirable) I.Eng, MCIBSE, MIET, B.Eng (Hons) or equivalent Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
03/03/2026
Full time
Technical Manager - BMS Systems London (Covering southern region) Perm Competitive salary + Car/Car/Travel Allowance + Flexible Benefits Summary We have an exciting new opportunity for a Technical Manager, with in depth experience of building management systems, to join our team. This role will ideally be based in London office, but will cover the southern region so travel will be required. In this role you will lead, own and manage the technical risk and opportunities within the business, from inception through to project completion, and client handover, focussing on design optimisation, opportunity identification, and mitigation of technical risk. You will ensure technical compliance with works information, scope, project specification and legislation, undertaking technical management of both internal and external designs. This is a permanent staff position with NG Bailey. Some of the key deliverables in this role will include: Demonstrate appropriate health and safety leadership to ensure the safety first and foremost message is visible and alive throughout all activities. Lead the technical engineering management on internally and externally designed projects to successful completion, ensuring best value design, management of opportunities and risk mitigation. Provide technical advice and assistance to other areas of the business, and support business development from a technical perspective. Assist the Regional Design & Engineering Manager in the production of technical management fees for projects. Ensure the accuracy and integrity of technical management costs, values, and programme forecasts, seeking opportunities to suggest actions which mitigate risk and maximise profitability. Support the Principal Technical manager in the identification, delivery and attendance of CPDs, ensuring that the development of design/technical team's competence is maintained. Provide technical advice and assistance to other areas for the business Prepare monthly project reports for senior stakeholders, highlighting progress, risks, opportunities, and resource issues. Advise on commercial progress against plan, any variances from plan, and the corrective actions being taken. On external designs, take ownership of the completion of the responsibilities matrix, ensuring scope gaps are mitigated. Build and maintain mutually beneficial customer, key supplier and internal relationships. Promote the design team and actively seek out new opportunities Communicate proactively with project stakeholders to improve our collaboration with operational teams. Conduct regular independent design/technical reviews, ensuring designs are technically correct and represent best value, and comply with all legal and contractual requirements. Apply current legislation regarding building regulations, standards, CDM, quality control, commissioning, safety & environmental issues. What we're looking for : Extensive experience of building management systems Operational experience on project installation Good understanding of design and build, and traditional construction contracts Significant experience of commercial management on design projects Strong communication skills Qualifications or professional memberships (desirable) I.Eng, MCIBSE, MIET, B.Eng (Hons) or equivalent Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Role Purpose: Responsible for the safe execution of a portfolio of concurrent projects for various Rolls-Royce sites. As part of the role you will ensure that the projects are delivered to meet Integral & Rolls-Royce s standards in regard to health, safety, quality, cost and programme, whilst complying as a Principal Contractor with current CDM legislation. This includes compliance with MS18 and CSO6 Rolls- Royce standards. You must be qualified in a related trade, mechanical, electrical, civil engineering, building fabric, roofing etc. What you will be doing You will have responsibility for the execution of projects with potential values between £50k to £15m, across various Rolls-Royce sites in Filton, Bristol. Manage the projects in accordance with the requirements of the NEC3 Framework Contract and ensure projects are delivered to the agreed contract programme. You will provide Health and safety leadership to your site delivery teams (including sub-contractors and suppliers), promoting behavioural safety improvements, ensuring our suppliers, sub-contractors and direct workforce follow company policies and procedures including Health & Safety, Quality Assurance and Engineering standards. Support the project risk management process and ensure effective controls are established to ensure the safe and timely delivery of the projects. Play an active lead in the production and risk management of quotations and estimates. Promote and maintain effective client/stakeholder relationships to protect and enhance the company's reputation at project level. Provide coaching, mentoring and development support to direct reports and trainees. Work closely with the Senior Design Manager to ensure robust, workable economic and constructable designs are produced. Support project opportunities where identified, to realise, maintain and improve the commercial project performance. Liaise with the Rolls-Royce Project Managers to ensure that the projects are managed in compliance with MS18, CS06 and the current delivery programme and cost plan. To enhance the strength of contract delivery to ensure highest standards of quality are maintained in accordance with programme delivery - complying with relevant British Standards, codes of practice and Rolls- Royce Standards. Ensure projects are completed snag and defect free. Ensure that post completion deliverables such as final accounts and Operation & Maintenance information is delivered within the contracted timescales. What we will need from you Proven and demonstrable experience in the role of a Senior Project Manager within the main contractor civil engineering industry (essential). Experience of working on Civils or Building projects within the Nuclear/Defence/Aviation industry and therefore familiar with working within these environments (highly desirable). You will be required to achieve SC level security clearance. Experience in the use of NEC3 Contracts (essential) Experience of managing health and safety procedures along with knowledge of H&S standards/regulations across multiple sites (essential). Experience in the preparation of quotations and estimates (essential). City & Guilds /NVQ (or equivalent) construction related qualification (essential). SMSTS, JIB/BESA, CSCS Card, First Aid (essential). Competent user of IT software packages including MS Office, Fieldview or similar tablet-based quality assurance software (essential). High level organisational ability along with time management skills in order to drive and meet deadlines (essential). People management and development experience (essential). What you can expect from us Competitive & negotiable salary depending on experience 26 days holiday plus bank holidays Car allowance Life assurance, Company pension scheme, Employee Assistance Program (EAP), Cycle to work scheme, Purchase an electric vehicle via salary sacrifice, Employee discounts with various brands Please note : You will be required to have a DBS check as part of your role at Integral. About JLL If you're looking to step up your career, JLL Workplace Management is the perfect professional home. At JLL, you'll have a chance to innovate with the world's leading businesses, put that expertise into action on landmark projects, and work on game-changing workplace and facilities management initiatives. You'll also make long-lasting professional connections through sharing different perspectives, and you'll be inspired by the best. We're focused on opportunity and want to help you make the most of yours. Achieve your ambitions join us at JLL Workplace Management!
03/03/2026
Full time
Role Purpose: Responsible for the safe execution of a portfolio of concurrent projects for various Rolls-Royce sites. As part of the role you will ensure that the projects are delivered to meet Integral & Rolls-Royce s standards in regard to health, safety, quality, cost and programme, whilst complying as a Principal Contractor with current CDM legislation. This includes compliance with MS18 and CSO6 Rolls- Royce standards. You must be qualified in a related trade, mechanical, electrical, civil engineering, building fabric, roofing etc. What you will be doing You will have responsibility for the execution of projects with potential values between £50k to £15m, across various Rolls-Royce sites in Filton, Bristol. Manage the projects in accordance with the requirements of the NEC3 Framework Contract and ensure projects are delivered to the agreed contract programme. You will provide Health and safety leadership to your site delivery teams (including sub-contractors and suppliers), promoting behavioural safety improvements, ensuring our suppliers, sub-contractors and direct workforce follow company policies and procedures including Health & Safety, Quality Assurance and Engineering standards. Support the project risk management process and ensure effective controls are established to ensure the safe and timely delivery of the projects. Play an active lead in the production and risk management of quotations and estimates. Promote and maintain effective client/stakeholder relationships to protect and enhance the company's reputation at project level. Provide coaching, mentoring and development support to direct reports and trainees. Work closely with the Senior Design Manager to ensure robust, workable economic and constructable designs are produced. Support project opportunities where identified, to realise, maintain and improve the commercial project performance. Liaise with the Rolls-Royce Project Managers to ensure that the projects are managed in compliance with MS18, CS06 and the current delivery programme and cost plan. To enhance the strength of contract delivery to ensure highest standards of quality are maintained in accordance with programme delivery - complying with relevant British Standards, codes of practice and Rolls- Royce Standards. Ensure projects are completed snag and defect free. Ensure that post completion deliverables such as final accounts and Operation & Maintenance information is delivered within the contracted timescales. What we will need from you Proven and demonstrable experience in the role of a Senior Project Manager within the main contractor civil engineering industry (essential). Experience of working on Civils or Building projects within the Nuclear/Defence/Aviation industry and therefore familiar with working within these environments (highly desirable). You will be required to achieve SC level security clearance. Experience in the use of NEC3 Contracts (essential) Experience of managing health and safety procedures along with knowledge of H&S standards/regulations across multiple sites (essential). Experience in the preparation of quotations and estimates (essential). City & Guilds /NVQ (or equivalent) construction related qualification (essential). SMSTS, JIB/BESA, CSCS Card, First Aid (essential). Competent user of IT software packages including MS Office, Fieldview or similar tablet-based quality assurance software (essential). High level organisational ability along with time management skills in order to drive and meet deadlines (essential). People management and development experience (essential). What you can expect from us Competitive & negotiable salary depending on experience 26 days holiday plus bank holidays Car allowance Life assurance, Company pension scheme, Employee Assistance Program (EAP), Cycle to work scheme, Purchase an electric vehicle via salary sacrifice, Employee discounts with various brands Please note : You will be required to have a DBS check as part of your role at Integral. About JLL If you're looking to step up your career, JLL Workplace Management is the perfect professional home. At JLL, you'll have a chance to innovate with the world's leading businesses, put that expertise into action on landmark projects, and work on game-changing workplace and facilities management initiatives. You'll also make long-lasting professional connections through sharing different perspectives, and you'll be inspired by the best. We're focused on opportunity and want to help you make the most of yours. Achieve your ambitions join us at JLL Workplace Management!
