We re Recruiting Thermal Insulation Engineers Portsmouth Do you hold an NVQ in Thermal Insulation but don t currently have a TICA Skill Card? We re looking for experienced Thermal Insulation Engineers who may be eligible to complete a TICA Competency Assessment after joining our team in Portsmouth. Key Dates Expected site start: October TICA Competency Assessment: To be completed after starting on site Pay Rates Basic rate: £19.04 per hour Tier 2 allowance: Additional £6.00 per hour Total standard hourly rate, including Tier 2 allowance: £25.04 Overtime 1: £28.56 per hour Overtime 2: £38.08 per hour Nightshift: £28.56 per hour Key Responsibilities Install thermal insulation to pipework, ductwork, ventilation systems and equipment Measure, cut and fit insulation materials accurately Work from technical specifications and instructions Complete all work safely, efficiently and to the required quality standards Inspect completed work and report any defects or concerns Maintain a clean and safe working environment Follow all company and site health and safety procedures Work effectively as part of the wider project team Assessment Requirements To be considered for the TICA Competency Assessment, applicants must provide: An up-to-date CV A copy of their Thermal Insulation NVQ Relevant references Evidence of at least four years industry experience Please note that the original NVQ certificate must be presented at the training centre in Darlington. All applications will be reviewed based on the applicant s qualifications, experience and suitability for the assessment. Security Clearance Requirements Candidates must be eligible to successfully complete BPSS checks and obtain SC clearance. The SC clearance process may include: Successful completion of the Baseline Personnel Security Standard Completion of a security questionnaire Departmental and company records checks Checks of spent and unspent criminal records Credit and financial history checks Security Service records checks An interview where further information or clarification is required A financial questionnaire where unresolved financial concerns are identified Checks involving relevant third parties listed on the security questionnaire
02/10/2026
Full time
We re Recruiting Thermal Insulation Engineers Portsmouth Do you hold an NVQ in Thermal Insulation but don t currently have a TICA Skill Card? We re looking for experienced Thermal Insulation Engineers who may be eligible to complete a TICA Competency Assessment after joining our team in Portsmouth. Key Dates Expected site start: October TICA Competency Assessment: To be completed after starting on site Pay Rates Basic rate: £19.04 per hour Tier 2 allowance: Additional £6.00 per hour Total standard hourly rate, including Tier 2 allowance: £25.04 Overtime 1: £28.56 per hour Overtime 2: £38.08 per hour Nightshift: £28.56 per hour Key Responsibilities Install thermal insulation to pipework, ductwork, ventilation systems and equipment Measure, cut and fit insulation materials accurately Work from technical specifications and instructions Complete all work safely, efficiently and to the required quality standards Inspect completed work and report any defects or concerns Maintain a clean and safe working environment Follow all company and site health and safety procedures Work effectively as part of the wider project team Assessment Requirements To be considered for the TICA Competency Assessment, applicants must provide: An up-to-date CV A copy of their Thermal Insulation NVQ Relevant references Evidence of at least four years industry experience Please note that the original NVQ certificate must be presented at the training centre in Darlington. All applications will be reviewed based on the applicant s qualifications, experience and suitability for the assessment. Security Clearance Requirements Candidates must be eligible to successfully complete BPSS checks and obtain SC clearance. The SC clearance process may include: Successful completion of the Baseline Personnel Security Standard Completion of a security questionnaire Departmental and company records checks Checks of spent and unspent criminal records Credit and financial history checks Security Service records checks An interview where further information or clarification is required A financial questionnaire where unresolved financial concerns are identified Checks involving relevant third parties listed on the security questionnaire
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Leeds and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Leeds and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Birmingham surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Birmingham surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements
Newcastle Upon Tyne, Tyne And Wear
Nelson Permanent Placements are recruiting for a Building Services HVAC Engineer to work mobile on live purpose built student accomodation around Newcastle surrounding area and ocassionally Scotland The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC Engineer to work mobile on live purpose built student accomodation around Newcastle surrounding area and ocassionally Scotland The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements
Bristol, Gloucestershire
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Bristol and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Bristol and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Mechanical Estimator (Thermal Insulation) Location: Brentwood Job Type: Full-Time, Permanent (Monday-Friday) Salary: £40,000-£50,000 DOE + Benefits About the Company Our client is a growing thermal insulation contractor with over 30 years of industry experience, delivering high-quality insulation solutions across commercial, industrial and energy sectors. Due to continued growth and a strong order book, they are looking to appoint an experienced Mechanical Estimator. The Role We are seeking a Mechanical Estimator with proven thermal insulation experience to manage projects from quantity take-off through to final quotation and tender submission. Working closely with suppliers, subcontractors, and clients, you will prepare accurate, competitive tenders and play a key role in securing new business. Key Responsibilities Review drawings, specifications and tender documents. Complete detailed quantity take-offs for pipework, ductwork, vessels and tanks. Prepare labour, material and subcontractor cost estimates. Use mechanical estimating software to produce estimates and quotations. Obtain and assess supplier and subcontractor pricing. Prepare tender submissions and commercial cost breakdowns. Identify risks, opportunities and value-engineering solutions. Attend site surveys and pre-tender meetings where required. Support negotiations and project handover following contract award. Requirements Proven experience as a Mechanical Estimator preferably within the thermal insulation industry. Experience managing projects from take-off to final quotation. Experience with in Ensign software or similar. Strong understanding of insulation systems, materials and specifications. Ability to interpret technical drawings and project documentation. Excellent commercial, numerical and communication skills. Strong Microsoft Excel skills. What's on Offer? Competitive salary and benefits package. Opportunity to join a well-established business with over 30 years of success. Long-term career progression. Diverse and high-profile projects. Supportive team environment and ongoing development. Apply Now If you have thermal insulation estimating experience and are confident delivering accurate tenders from take-off through to final quotation, we'd like to hear from you. Submit your CV today and one of the MarkMay team will be in touch.
27/09/2026
Full time
Mechanical Estimator (Thermal Insulation) Location: Brentwood Job Type: Full-Time, Permanent (Monday-Friday) Salary: £40,000-£50,000 DOE + Benefits About the Company Our client is a growing thermal insulation contractor with over 30 years of industry experience, delivering high-quality insulation solutions across commercial, industrial and energy sectors. Due to continued growth and a strong order book, they are looking to appoint an experienced Mechanical Estimator. The Role We are seeking a Mechanical Estimator with proven thermal insulation experience to manage projects from quantity take-off through to final quotation and tender submission. Working closely with suppliers, subcontractors, and clients, you will prepare accurate, competitive tenders and play a key role in securing new business. Key Responsibilities Review drawings, specifications and tender documents. Complete detailed quantity take-offs for pipework, ductwork, vessels and tanks. Prepare labour, material and subcontractor cost estimates. Use mechanical estimating software to produce estimates and quotations. Obtain and assess supplier and subcontractor pricing. Prepare tender submissions and commercial cost breakdowns. Identify risks, opportunities and value-engineering solutions. Attend site surveys and pre-tender meetings where required. Support negotiations and project handover following contract award. Requirements Proven experience as a Mechanical Estimator preferably within the thermal insulation industry. Experience managing projects from take-off to final quotation. Experience with in Ensign software or similar. Strong understanding of insulation systems, materials and specifications. Ability to interpret technical drawings and project documentation. Excellent commercial, numerical and communication skills. Strong Microsoft Excel skills. What's on Offer? Competitive salary and benefits package. Opportunity to join a well-established business with over 30 years of success. Long-term career progression. Diverse and high-profile projects. Supportive team environment and ongoing development. Apply Now If you have thermal insulation estimating experience and are confident delivering accurate tenders from take-off through to final quotation, we'd like to hear from you. Submit your CV today and one of the MarkMay team will be in touch.
VENTILATION PACKAGE MANAGER CENTRAL LONDON Location: Central London Duration: Minimum 6 months Start: ASAP Project: Major Commercial Development We are currently seeking a senior and experienced Ventilation Package Manager to join the delivery team on a major commercial development in Central London. This is a senior, hands-on role for someone who can take ownership of the ventilation and ductwork packages, while supporting and working alongside two engineers within the project team. The successful candidate will be responsible for coordinating and managing multiple ductwork contractors, ensuring progress, quality, compliance and delivery remain on programme. Key Responsibilities Take overall ownership of the ventilation and ductwork packages. Support and provide direction to two engineers managing the ventilation works. Manage and coordinate multiple ductwork contractors across the project. Carry out regular progress walk-downs and monitor installation against programme. Review progress, identify delays and drive contractors to meet key milestones. Oversee QA/QC of ventilation installations and ensure works meet project specifications. Ensure fire and smoke compliance requirements are fully understood, coordinated and delivered. Coordinate ventilation works with other M&E disciplines and the wider construction team. Review drawings, specifications, RAMS and technical submissions. Identify and resolve technical, coordination and installation issues. Manage snagging, ensuring defects are identified, tracked and closed out efficiently. Monitor testing, commissioning and handover requirements. Attend coordination, progress and technical meetings. Maintain strong relationships with subcontractors, engineers, consultants and the main contractor. Take responsibility for ensuring the ventilation packages are delivered safely, to programme, specification and required quality standards. The Ideal Candidate We are ideally looking for someone senior and experienced, who has previously managed significant ventilation/ductwork packages on large-scale commercial projects. You should have: Strong experience in ventilation and ductwork installation. Previous experience as a Ventilation Package Manager, Mechanical Package Manager, Mechanical Manager or similar. Experience managing multiple specialist ductwork contractors. Strong understanding of QA/QC, fire and smoke compliance and snagging. Proven ability to manage engineers and subcontractors while maintaining overall package ownership. Excellent knowledge of M&E coordination and construction sequencing. Strong organisational, communication and problem-solving skills. The confidence to challenge contractors and drive progress where required. Experience working on major commercial developments is highly desirable. This is an excellent opportunity for a senior Ventilation Package Manager looking for a minimum 6-month contract on a major Central London commercial development, with significant responsibility for the successful delivery of the ventilation packages. For more information regarding the above role, please contact Stephen Tiigah (url removed)
17/09/2026
Contract
VENTILATION PACKAGE MANAGER CENTRAL LONDON Location: Central London Duration: Minimum 6 months Start: ASAP Project: Major Commercial Development We are currently seeking a senior and experienced Ventilation Package Manager to join the delivery team on a major commercial development in Central London. This is a senior, hands-on role for someone who can take ownership of the ventilation and ductwork packages, while supporting and working alongside two engineers within the project team. The successful candidate will be responsible for coordinating and managing multiple ductwork contractors, ensuring progress, quality, compliance and delivery remain on programme. Key Responsibilities Take overall ownership of the ventilation and ductwork packages. Support and provide direction to two engineers managing the ventilation works. Manage and coordinate multiple ductwork contractors across the project. Carry out regular progress walk-downs and monitor installation against programme. Review progress, identify delays and drive contractors to meet key milestones. Oversee QA/QC of ventilation installations and ensure works meet project specifications. Ensure fire and smoke compliance requirements are fully understood, coordinated and delivered. Coordinate ventilation works with other M&E disciplines and the wider construction team. Review drawings, specifications, RAMS and technical submissions. Identify and resolve technical, coordination and installation issues. Manage snagging, ensuring defects are identified, tracked and closed out efficiently. Monitor testing, commissioning and handover requirements. Attend coordination, progress and technical meetings. Maintain strong relationships with subcontractors, engineers, consultants and the main contractor. Take responsibility for ensuring the ventilation packages are delivered safely, to programme, specification and required quality standards. The Ideal Candidate We are ideally looking for someone senior and experienced, who has previously managed significant ventilation/ductwork packages on large-scale commercial projects. You should have: Strong experience in ventilation and ductwork installation. Previous experience as a Ventilation Package Manager, Mechanical Package Manager, Mechanical Manager or similar. Experience managing multiple specialist ductwork contractors. Strong understanding of QA/QC, fire and smoke compliance and snagging. Proven ability to manage engineers and subcontractors while maintaining overall package ownership. Excellent knowledge of M&E coordination and construction sequencing. Strong organisational, communication and problem-solving skills. The confidence to challenge contractors and drive progress where required. Experience working on major commercial developments is highly desirable. This is an excellent opportunity for a senior Ventilation Package Manager looking for a minimum 6-month contract on a major Central London commercial development, with significant responsibility for the successful delivery of the ventilation packages. For more information regarding the above role, please contact Stephen Tiigah (url removed)
Ventilation Package Manager We are seeking a Ventilation Package Manager to join a major Commercial Project in London. This is an opportunity to play a key role on a high-profile site, leading the delivery of the ventilation packages to ensure systems are installed, inspected, tested, and completed to the highest standards and ready for successful client handover. Your Team You'll join a hardworking, ambitious, and supportive team where your ideas matter and your development is genuinely prioritised. At Dornan, we invest in long-term career growth through structured progression pathways and continuous training support. The Role Reporting to the Project Director, you will take ownership of the ventilation packages, supporting two Engineers and managing multiple ductwork contractors across the project. You will be responsible for driving progress on site, carrying out progress walkdowns, overseeing quality and compliance, managing snagging and ensuring ventilation systems are delivered in line with project specifications, programme requirements and industry standards. You will act as an ambassador for the company and its values, driving safety, quality, and performance on site while coordinating subcontractors and project teams to deliver fully compliant and operational systems. Responsibilities Manage and take ownership of the ventilation packages across the project Support and provide direction to two Engineers responsible for the day-to-day delivery of ventilation works Manage and coordinate multiple ductwork contractors, ensuring works are delivered safely, efficiently, and in line with programme requirements Carry out regular progress walkdowns, monitoring installation progress and identifying constraints, risks, and areas requiring action Drive contractor performance and ensure agreed programme milestones and installation targets are achieved Oversee QA/QC activities for ventilation installations, ensuring works comply with project specifications, approved drawings, and quality requirements Ensure Fire and Smoke compliance across ventilation systems, including fire-rated ductwork, fire dampers, smoke control systems, penetrations, and associated documentation Coordinate ventilation works with wider Mechanical, Electrical, Fire and other building services Coordinate design information between clients, designers, contractors, and project teams Ensure timely approval of materials and systems through the technical submittal process Carry out quality inspections, manage snag lists, and drive the close-out of outstanding works ahead of commissioning and handover Maintain clear communication with subcontractors through meetings, documentation, progress reporting, and site coordination Participate in project meetings, engineering reviews, coordination workshops, and progress meetings Support commissioning activities and ensure systems are completed and ready for testing, witnessing, and final handover Own the close-out of ventilation packages including O&M manuals, QA documentation, testing records, fire and smoke compliance documentation, safety file, and final handover About You Your Experience Strong experience managing ventilation and ductwork packages on large-scale commercial or mission-critical projects Experience managing multiple ductwork subcontractors and driving installation progress on site Experience leading or supporting Engineers and site teams Strong understanding of ventilation systems, ductwork installation, testing, commissioning, and project close-out Strong knowledge of QA/QC requirements relating to ventilation installations Good understanding of Fire and Smoke compliance, including fire-rated ductwork, fire dampers, smoke control systems, and associated testing and certification Experience carrying out progress walkdowns, quality inspections, snagging, and close-out activities Strong understanding of the coordination of ventilation systems with wider M&E services Proficient in project management and information management software Your Qualifications Relevant Mechanical Engineering or Building Services qualification Strong knowledge of ventilation systems, ductwork installation, Fire and Smoke compliance, QA/QC, commissioning, and project close-out To find out more information please contact Sean Hitchman on (phone number removed) / (url removed) : Our Network through mentorship, development, and advocacy empowers women and promotes a more forward thinking construction industry. Dornan Strava Club: employees can take part in fitness challenges, build connections across the business, and contribute to monthly charitable giving initiatives. Be Yourself: We want everyone at Dornan to feel welcome, valued, and supported. By embracing different backgrounds, experiences, and perspectives, we create an environment where people can be themselves, grow their careers, and thrive.
17/09/2026
Full time
Ventilation Package Manager We are seeking a Ventilation Package Manager to join a major Commercial Project in London. This is an opportunity to play a key role on a high-profile site, leading the delivery of the ventilation packages to ensure systems are installed, inspected, tested, and completed to the highest standards and ready for successful client handover. Your Team You'll join a hardworking, ambitious, and supportive team where your ideas matter and your development is genuinely prioritised. At Dornan, we invest in long-term career growth through structured progression pathways and continuous training support. The Role Reporting to the Project Director, you will take ownership of the ventilation packages, supporting two Engineers and managing multiple ductwork contractors across the project. You will be responsible for driving progress on site, carrying out progress walkdowns, overseeing quality and compliance, managing snagging and ensuring ventilation systems are delivered in line with project specifications, programme requirements and industry standards. You will act as an ambassador for the company and its values, driving safety, quality, and performance on site while coordinating subcontractors and project teams to deliver fully compliant and operational systems. Responsibilities Manage and take ownership of the ventilation packages across the project Support and provide direction to two Engineers responsible for the day-to-day delivery of ventilation works Manage and coordinate multiple ductwork contractors, ensuring works are delivered safely, efficiently, and in line with programme requirements Carry out regular progress walkdowns, monitoring installation progress and identifying constraints, risks, and areas requiring action Drive contractor performance and ensure agreed programme milestones and installation targets are achieved Oversee QA/QC activities for ventilation installations, ensuring works comply with project specifications, approved drawings, and quality requirements Ensure Fire and Smoke compliance across ventilation systems, including fire-rated ductwork, fire dampers, smoke control systems, penetrations, and associated documentation Coordinate ventilation works with wider Mechanical, Electrical, Fire and other building services Coordinate design information between clients, designers, contractors, and project teams Ensure timely approval of materials and systems through the technical submittal process Carry out quality inspections, manage snag lists, and drive the close-out of outstanding works ahead of commissioning and handover Maintain clear communication with subcontractors through meetings, documentation, progress reporting, and site coordination Participate in project meetings, engineering reviews, coordination workshops, and progress meetings Support commissioning activities and ensure systems are completed and ready for testing, witnessing, and final handover Own the close-out of ventilation packages including O&M manuals, QA documentation, testing records, fire and smoke compliance documentation, safety file, and final handover About You Your Experience Strong experience managing ventilation and ductwork packages on large-scale commercial or mission-critical projects Experience managing multiple ductwork subcontractors and driving installation progress on site Experience leading or supporting Engineers and site teams Strong understanding of ventilation systems, ductwork installation, testing, commissioning, and project close-out Strong knowledge of QA/QC requirements relating to ventilation installations Good understanding of Fire and Smoke compliance, including fire-rated ductwork, fire dampers, smoke control systems, and associated testing and certification Experience carrying out progress walkdowns, quality inspections, snagging, and close-out activities Strong understanding of the coordination of ventilation systems with wider M&E services Proficient in project management and information management software Your Qualifications Relevant Mechanical Engineering or Building Services qualification Strong knowledge of ventilation systems, ductwork installation, Fire and Smoke compliance, QA/QC, commissioning, and project close-out To find out more information please contact Sean Hitchman on (phone number removed) / (url removed) : Our Network through mentorship, development, and advocacy empowers women and promotes a more forward thinking construction industry. Dornan Strava Club: employees can take part in fitness challenges, build connections across the business, and contribute to monthly charitable giving initiatives. Be Yourself: We want everyone at Dornan to feel welcome, valued, and supported. By embracing different backgrounds, experiences, and perspectives, we create an environment where people can be themselves, grow their careers, and thrive.
Ventilation Fitter - Thames Valley / West London Permanent Employment 180- 220 per day DOE Suitable for: Ventilation Fitter, Ductwork Fitter, Duct Fitter, Lead Ventilation Fitter, Senior Ductwork Fitter, HVAC Installer An established commercial ventilation contractor is looking for an experienced Ventilation Fitter based in the Thames Valley or on the western edge of London to join its installation team. The business has operated within the ventilation sector for over 30 years and is now entering a period of growth. The role is primarily focused on the installation of ventilation ductwork for commercial HVAC projects, working from drawings and alongside air conditioning, mechanical and other building services contractors. Projects cover a varied commercial and industrial client base including offices, leisure facilities and manufacturing environments. Requirements Previous experience as a Ventilation Fitter / Ductwork Fitter Strong commercial ductwork installation experience Able to install and assemble ventilation ductwork accurately on site Confident working from ventilation drawings, schematics and specifications Experience working alongside AC, mechanical and wider building services trades Relevant CSCS card / trade qualifications Good understanding of construction site health & safety requirements Knowledge of fire safety requirements associated with ventilation installations Able to work independently and as part of an installation team Supervisory or Lead Fitter experience advantageous but not essential Package 180- 220 per day DOE Full-time, permanent employment Ideally based in the Thames Valley / West London area Predominantly London-based projects Established contractor with over 30 years' experience Opportunity to join the business during a period of continued investment and growth Interested in hearing more? Call Max Robinson on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
15/09/2026
Full time
Ventilation Fitter - Thames Valley / West London Permanent Employment 180- 220 per day DOE Suitable for: Ventilation Fitter, Ductwork Fitter, Duct Fitter, Lead Ventilation Fitter, Senior Ductwork Fitter, HVAC Installer An established commercial ventilation contractor is looking for an experienced Ventilation Fitter based in the Thames Valley or on the western edge of London to join its installation team. The business has operated within the ventilation sector for over 30 years and is now entering a period of growth. The role is primarily focused on the installation of ventilation ductwork for commercial HVAC projects, working from drawings and alongside air conditioning, mechanical and other building services contractors. Projects cover a varied commercial and industrial client base including offices, leisure facilities and manufacturing environments. Requirements Previous experience as a Ventilation Fitter / Ductwork Fitter Strong commercial ductwork installation experience Able to install and assemble ventilation ductwork accurately on site Confident working from ventilation drawings, schematics and specifications Experience working alongside AC, mechanical and wider building services trades Relevant CSCS card / trade qualifications Good understanding of construction site health & safety requirements Knowledge of fire safety requirements associated with ventilation installations Able to work independently and as part of an installation team Supervisory or Lead Fitter experience advantageous but not essential Package 180- 220 per day DOE Full-time, permanent employment Ideally based in the Thames Valley / West London area Predominantly London-based projects Established contractor with over 30 years' experience Opportunity to join the business during a period of continued investment and growth Interested in hearing more? Call Max Robinson on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
Area Sales Manager - Dust & Fume Extraction OTE 70,000+ Southern England A specialist manufacturer and systems provider within industrial dust, fume and air extraction is looking to appoint an Area Sales Manager covering Southern England. The role is focused on selling bespoke LEV, dust and fume extraction systems directly into manufacturing environments, with typical applications incorporating filtration equipment, ductwork, hoods and associated ventilation components. You will manage opportunities from initial enquiry and site survey through technical solution development, commercial proposal and project handover, while developing new business across the territory. Customers include manufacturers within food, aerospace and pharmaceutical environments. Requirements Experience of LEV, dust extraction, fume extraction or industrial ventilation Proven technical B2B sales experience within industrial or engineered systems. Comfortable conducting site surveys and understanding manufacturing processes and applications. Knowledge of ductwork, filtration and ventilation principles. Experience selling project-led capital equipment rather than catalogue/commodity products. Able to develop technically appropriate solutions and commercial proposals. Comfortable managing the sales cycle through to project handover. Strong territory management and new business development capability. Package OTE 70,000+ 50,000 - 60,000 base salary Company Car/Car Allowance Bonus 25 Days Holiday + Bank Holidays Pension Scheme Health Insurance Interested in hearing more? Call Max Robinson on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
15/09/2026
Full time
Area Sales Manager - Dust & Fume Extraction OTE 70,000+ Southern England A specialist manufacturer and systems provider within industrial dust, fume and air extraction is looking to appoint an Area Sales Manager covering Southern England. The role is focused on selling bespoke LEV, dust and fume extraction systems directly into manufacturing environments, with typical applications incorporating filtration equipment, ductwork, hoods and associated ventilation components. You will manage opportunities from initial enquiry and site survey through technical solution development, commercial proposal and project handover, while developing new business across the territory. Customers include manufacturers within food, aerospace and pharmaceutical environments. Requirements Experience of LEV, dust extraction, fume extraction or industrial ventilation Proven technical B2B sales experience within industrial or engineered systems. Comfortable conducting site surveys and understanding manufacturing processes and applications. Knowledge of ductwork, filtration and ventilation principles. Experience selling project-led capital equipment rather than catalogue/commodity products. Able to develop technically appropriate solutions and commercial proposals. Comfortable managing the sales cycle through to project handover. Strong territory management and new business development capability. Package OTE 70,000+ 50,000 - 60,000 base salary Company Car/Car Allowance Bonus 25 Days Holiday + Bank Holidays Pension Scheme Health Insurance Interested in hearing more? Call Max Robinson on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
Technical Sales Engineer Location: Haslingden Salary: 45000 Job Type: Permanent, Full Time The Role We are recruiting for an experienced Technical Sales Engineer to join an established engineering business specialising in ventilation, air conditioning, ductwork and fire-resisting ductwork. This is an excellent opportunity for a technically minded sales professional who can combine engineering knowledge with strong commercial and customer relationship skills. Key Responsibilities Prepare tenders for ventilation, air conditioning, ductwork and fire-resisting ductwork projects. Produce quotations for ventilation and air movement products. Develop quotations for bespoke and non-standard products from first principles. Liaise with existing and prospective customers regarding technical and commercial requirements. Develop customer relationships and identify opportunities to increase sales. Follow up quotations and tender submissions to maximise conversion. Attend customer meetings, site meetings and on-site surveys when required. Process customer orders, including engineering drawings, materials and equipment requirements. Liaise with customers regarding project requirements and deliveries. Work closely with Contracts, Production and Engineering departments. Support testing and performance data production for new products. Represent the business at trade exhibitions, CPD seminars and industry events. Support marketing activities including newsletters, LinkedIn content and marketing materials. Contribute to improving the company's tendering and quotation processes. About You Previous experience in technical sales, sales engineering, estimating or a similar role. Strong knowledge of ventilation, HVAC, air movement or air conditioning systems Strong commercial awareness and customer relationship skills. Excellent communication, negotiation and influencing abilities. Highly organised with strong attention to detail. Self-motivated, proactive and comfortable working independently. Good IT skills, particularly Microsoft Word, Excel and Office 365. HNC/HND or Degree in Engineering or Building Services would be advantageous. Experience within ventilation, HVAC, ductwork or building services would be highly desirable. Apply Today If you are an experienced Technical Sales Engineer, Sales Engineer, HVAC Engineer, Ventilation Engineer or Estimator looking for your next opportunity, we would be keen to hear from you. Apply today with your CV to be considered for the position.
09/09/2026
Full time
Technical Sales Engineer Location: Haslingden Salary: 45000 Job Type: Permanent, Full Time The Role We are recruiting for an experienced Technical Sales Engineer to join an established engineering business specialising in ventilation, air conditioning, ductwork and fire-resisting ductwork. This is an excellent opportunity for a technically minded sales professional who can combine engineering knowledge with strong commercial and customer relationship skills. Key Responsibilities Prepare tenders for ventilation, air conditioning, ductwork and fire-resisting ductwork projects. Produce quotations for ventilation and air movement products. Develop quotations for bespoke and non-standard products from first principles. Liaise with existing and prospective customers regarding technical and commercial requirements. Develop customer relationships and identify opportunities to increase sales. Follow up quotations and tender submissions to maximise conversion. Attend customer meetings, site meetings and on-site surveys when required. Process customer orders, including engineering drawings, materials and equipment requirements. Liaise with customers regarding project requirements and deliveries. Work closely with Contracts, Production and Engineering departments. Support testing and performance data production for new products. Represent the business at trade exhibitions, CPD seminars and industry events. Support marketing activities including newsletters, LinkedIn content and marketing materials. Contribute to improving the company's tendering and quotation processes. About You Previous experience in technical sales, sales engineering, estimating or a similar role. Strong knowledge of ventilation, HVAC, air movement or air conditioning systems Strong commercial awareness and customer relationship skills. Excellent communication, negotiation and influencing abilities. Highly organised with strong attention to detail. Self-motivated, proactive and comfortable working independently. Good IT skills, particularly Microsoft Word, Excel and Office 365. HNC/HND or Degree in Engineering or Building Services would be advantageous. Experience within ventilation, HVAC, ductwork or building services would be highly desirable. Apply Today If you are an experienced Technical Sales Engineer, Sales Engineer, HVAC Engineer, Ventilation Engineer or Estimator looking for your next opportunity, we would be keen to hear from you. Apply today with your CV to be considered for the position.
