Based Hertfordshire A leading, established and highly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled Electrical Project Engineer from an M&E / Building Services electrical installation projects background to join their exciting planned growth and continued success. You will be involved with projects that can range from 1.5M- 20M+ Those with any M&E installations experience in commercial and or industrial environments are of serious interest as an Electrical Project Engineer or similar. We are looking to make an immediate appointment and this is a genuinely exciting time to be a part of this growth campaign. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with direct working experience in the project delivery of electrical installations you would expect to find in commercial and industrial settings. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is both office and site based as necessary to support project requirements. You will become familiar with all the project details, design and specifications whilst collating technical submittals detailed by the Contracts / Project Manager and then manage this process liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinating drawings when requested. Candidates sought will have experience in advising and guiding sub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the electrical installations You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performing troubleshooting techniques to identify problems and apply corrective actions whilst managing document control to ensure all the logs are kept up to date. As a final, you will be skilled in creating handover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Electrical Engineering, Building Services or an Electrical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assured that you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad.
18/01/2026
Full time
Based Hertfordshire A leading, established and highly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled Electrical Project Engineer from an M&E / Building Services electrical installation projects background to join their exciting planned growth and continued success. You will be involved with projects that can range from 1.5M- 20M+ Those with any M&E installations experience in commercial and or industrial environments are of serious interest as an Electrical Project Engineer or similar. We are looking to make an immediate appointment and this is a genuinely exciting time to be a part of this growth campaign. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with direct working experience in the project delivery of electrical installations you would expect to find in commercial and industrial settings. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is both office and site based as necessary to support project requirements. You will become familiar with all the project details, design and specifications whilst collating technical submittals detailed by the Contracts / Project Manager and then manage this process liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinating drawings when requested. Candidates sought will have experience in advising and guiding sub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the electrical installations You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performing troubleshooting techniques to identify problems and apply corrective actions whilst managing document control to ensure all the logs are kept up to date. As a final, you will be skilled in creating handover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Electrical Engineering, Building Services or an Electrical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assured that you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad.
An incredibly rare oportunity has been created to appoint a Senior MEP professional to step in as an MEP Contracts Director / MEP Project Director. This genuinely stable, dynamic successful organisation specialise in Mechanical and Electrical installations up to an industrial level. Therefore, we seek those who have an industrial M&E / MEP background to qualify for this role. Candidates sought will be based or commutable to Bristol / Avon You will be a highly experienced and professional character equipped with an already impressive track record and background in Mechanical & Electrical Services / M&E / Building Services, capable and proven to take ownership of schemes up to 20M and beyond. Being very much client side, you will be approachable and mannered with integrity whilst you will also be a strong leader capable of managing multidisciplinary teams. Your commercial acumen will be first class, with a finger on the pulse in depth knowledge of UK building regulations, MEP systems and construction methodologies as you would expect at this level. You will be a great mentor managing Project Managers and other support staff, whilst also liaising with Consultants, sub contractors and specialist Engineers. Responsible for procurement, this is a vital part of your previous experience, as well as driving commercial performance, cost control, technical elements, safety, risk management and quality standards. This award winning specialist contractor can offer you real scope to carve out your career further. Should you be at this level or are JUST about to step into it, then we want to hear from you in the first instance. When submitting your CV, please ensure it is up to date and shows all the relevant experience you have to secure the best chance of an interview.
18/01/2026
Full time
An incredibly rare oportunity has been created to appoint a Senior MEP professional to step in as an MEP Contracts Director / MEP Project Director. This genuinely stable, dynamic successful organisation specialise in Mechanical and Electrical installations up to an industrial level. Therefore, we seek those who have an industrial M&E / MEP background to qualify for this role. Candidates sought will be based or commutable to Bristol / Avon You will be a highly experienced and professional character equipped with an already impressive track record and background in Mechanical & Electrical Services / M&E / Building Services, capable and proven to take ownership of schemes up to 20M and beyond. Being very much client side, you will be approachable and mannered with integrity whilst you will also be a strong leader capable of managing multidisciplinary teams. Your commercial acumen will be first class, with a finger on the pulse in depth knowledge of UK building regulations, MEP systems and construction methodologies as you would expect at this level. You will be a great mentor managing Project Managers and other support staff, whilst also liaising with Consultants, sub contractors and specialist Engineers. Responsible for procurement, this is a vital part of your previous experience, as well as driving commercial performance, cost control, technical elements, safety, risk management and quality standards. This award winning specialist contractor can offer you real scope to carve out your career further. Should you be at this level or are JUST about to step into it, then we want to hear from you in the first instance. When submitting your CV, please ensure it is up to date and shows all the relevant experience you have to secure the best chance of an interview.
Based Hertfordshire A leading, established and highly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled Mechanical Project Engineer from an M&E / Building Services mechanical installation projects background to join their exciting planned growth and continued success. You will be involved with projects that can range from 1.5M- 20M+ Those with any M&E installations experience in commercial and or industrial environments are of serious interest as a Mechanical Project Engineer or similar. We are looking to make an immediate appointment and this is a genuinely exciting time to be a part of this growth campaign. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with direct working experience in the project delivery of mechanical installations you would expect to find in commercial and industrial settings. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is both office and site based as necessary to support project requirements. You will become familiar with all the project details, design and specifications whilst collating technical submittals detailed by the Contracts / Project Manager and then manage this process liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinating drawings when requested as well as RFI's. Candidates sought will have experience in advising and guiding sub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the mechanical installations. You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performing troubleshooting techniques to identify problems and apply corrective actions whilst managing document control to ensure all the logs are kept up to date. As a final, you will be skilled in creating handover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Mechanical Engineering, Building Services OR a Mechanical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assured that you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad.
18/01/2026
Full time
Based Hertfordshire A leading, established and highly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled Mechanical Project Engineer from an M&E / Building Services mechanical installation projects background to join their exciting planned growth and continued success. You will be involved with projects that can range from 1.5M- 20M+ Those with any M&E installations experience in commercial and or industrial environments are of serious interest as a Mechanical Project Engineer or similar. We are looking to make an immediate appointment and this is a genuinely exciting time to be a part of this growth campaign. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with direct working experience in the project delivery of mechanical installations you would expect to find in commercial and industrial settings. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is both office and site based as necessary to support project requirements. You will become familiar with all the project details, design and specifications whilst collating technical submittals detailed by the Contracts / Project Manager and then manage this process liaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinating drawings when requested as well as RFI's. Candidates sought will have experience in advising and guiding sub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the mechanical installations. You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performing troubleshooting techniques to identify problems and apply corrective actions whilst managing document control to ensure all the logs are kept up to date. As a final, you will be skilled in creating handover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Mechanical Engineering, Building Services OR a Mechanical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assured that you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad.
We are seeking an experienced Senior M&E Quantity Surveyor to join our team in London, overseeing a portfolio of residential and commercial schemes. This is an excellent opportunity for a commercially astute professional to play a key role in the financial management of complex M&E packages from pre-construction through to final account. Senior M&E Quantity Surveyor Key Responsibilities Take full commercial responsibility for M&E packages on residential and commercial projects Prepare and manage cost plans, budgets, and cash flows Procure M&E subcontractors and manage tender processes Administer contracts, variations, valuations, and final accounts Assess and manage risk and value engineering opportunities Prepare accurate monthly cost reports and forecasts Liaise closely with project managers, design teams, clients, and subcontractors Mentor and support junior commercial staff where required Senior M&E Quantity Surveyor Requirements Proven experience as a Senior M&E Quantity Surveyor Strong background in both residential and commercial M&E projects Excellent knowledge of mechanical and electrical building services Strong understanding of standard forms of contract Commercially driven with strong negotiation skills Ability to manage multiple projects simultaneously Relevant degree or professional qualification (preferred) What We Offer Competitive salary and benefits package Long-term career progression opportunities Exposure to high-quality residential and commercial developments Supportive and professional working environment To apply , please submit your CV or contact us for further information
17/01/2026
Full time
We are seeking an experienced Senior M&E Quantity Surveyor to join our team in London, overseeing a portfolio of residential and commercial schemes. This is an excellent opportunity for a commercially astute professional to play a key role in the financial management of complex M&E packages from pre-construction through to final account. Senior M&E Quantity Surveyor Key Responsibilities Take full commercial responsibility for M&E packages on residential and commercial projects Prepare and manage cost plans, budgets, and cash flows Procure M&E subcontractors and manage tender processes Administer contracts, variations, valuations, and final accounts Assess and manage risk and value engineering opportunities Prepare accurate monthly cost reports and forecasts Liaise closely with project managers, design teams, clients, and subcontractors Mentor and support junior commercial staff where required Senior M&E Quantity Surveyor Requirements Proven experience as a Senior M&E Quantity Surveyor Strong background in both residential and commercial M&E projects Excellent knowledge of mechanical and electrical building services Strong understanding of standard forms of contract Commercially driven with strong negotiation skills Ability to manage multiple projects simultaneously Relevant degree or professional qualification (preferred) What We Offer Competitive salary and benefits package Long-term career progression opportunities Exposure to high-quality residential and commercial developments Supportive and professional working environment To apply , please submit your CV or contact us for further information
Job Title: M&E Quantity Surveyor Location: London Type: Full-Time An opportunity for progression and development. About the company: I am working with a leading M&E Contractor with a track record of excellence spanning a number years with a low turnover of staff and plenty of flexibility. They are currently seeking a motivated and experienced M&E Quantity Surveyor to join our dynamic team primarily on data centres. Job Description: As an M&E Quantity Surveyor, you will play a pivotal role in the successful execution of their projects. You will be responsible for managing the financial aspects of Mechanical and Electrical (M&E) construction projects, ensuring that they are delivered on time and within budget. Your duties and responsibilities will include: Cost Estimation: Prepare accurate cost estimates for M&E projects, taking into account materials, labor, equipment, and other relevant factors. Budget Management: Monitor project budgets, track costs, and provide regular financial updates to project stakeholders. Contract Management: Review and negotiate contracts, ensuring that they are fair and in compliance with all applicable regulations. Procurement: Coordinate the procurement of materials and services, seeking cost-effective solutions without compromising quality. Risk Management: Identify and mitigate financial risks associated with M&E projects, working closely with the project team to find solutions. Variation Orders: Handle variation orders and change requests, assessing their impact on project costs and timelines. Cost Control: Implement effective cost control measures to minimize project cost overruns. Final Account: Prepare and negotiate the final accounts for M&E projects. Reporting: Provide regular financial reports to project managers and senior management. Requirements: Bachelor's degree in Quantity Surveying, Engineering, or a related field (preference) 3 years of experience as an M&E Quantity Surveyor in the construction industry. Strong knowledge of construction contracts, procurement, and cost estimation. Excellent negotiation and communication skills. Proficiency in relevant software and tools Attention to detail and a strong analytical mindset. What They Offer: Competitive salary and benefits package. Opportunities for career advancement and professional development. A collaborative and inclusive work environment. Involvement in exciting and diverse construction projects. Flexibility and working from home
17/01/2026
Full time
Job Title: M&E Quantity Surveyor Location: London Type: Full-Time An opportunity for progression and development. About the company: I am working with a leading M&E Contractor with a track record of excellence spanning a number years with a low turnover of staff and plenty of flexibility. They are currently seeking a motivated and experienced M&E Quantity Surveyor to join our dynamic team primarily on data centres. Job Description: As an M&E Quantity Surveyor, you will play a pivotal role in the successful execution of their projects. You will be responsible for managing the financial aspects of Mechanical and Electrical (M&E) construction projects, ensuring that they are delivered on time and within budget. Your duties and responsibilities will include: Cost Estimation: Prepare accurate cost estimates for M&E projects, taking into account materials, labor, equipment, and other relevant factors. Budget Management: Monitor project budgets, track costs, and provide regular financial updates to project stakeholders. Contract Management: Review and negotiate contracts, ensuring that they are fair and in compliance with all applicable regulations. Procurement: Coordinate the procurement of materials and services, seeking cost-effective solutions without compromising quality. Risk Management: Identify and mitigate financial risks associated with M&E projects, working closely with the project team to find solutions. Variation Orders: Handle variation orders and change requests, assessing their impact on project costs and timelines. Cost Control: Implement effective cost control measures to minimize project cost overruns. Final Account: Prepare and negotiate the final accounts for M&E projects. Reporting: Provide regular financial reports to project managers and senior management. Requirements: Bachelor's degree in Quantity Surveying, Engineering, or a related field (preference) 3 years of experience as an M&E Quantity Surveyor in the construction industry. Strong knowledge of construction contracts, procurement, and cost estimation. Excellent negotiation and communication skills. Proficiency in relevant software and tools Attention to detail and a strong analytical mindset. What They Offer: Competitive salary and benefits package. Opportunities for career advancement and professional development. A collaborative and inclusive work environment. Involvement in exciting and diverse construction projects. Flexibility and working from home
Contracts Manager M&E Maintenance We are seeking an experienced and proactive Contracts Manager to oversee the delivery of mechanical, electrical, and HVAC maintenance services across a diverse portfolio of commercial and industrial clients. This position plays a key role in ensuring all contracted works are delivered safely, efficiently, and in line with contractual, financial, and quality expectations. Key Responsibilities Manage end-to-end performance of multiple maintenance contracts, ensuring compliance with SLAs and KPIs Act as the primary client contact, building strong relationships and ensuring high customer satisfaction Oversee PPM, reactive maintenance, and minor project delivery across M&E and HVAC disciplines Monitor contract financials, including budgeting, forecasting, margin control, and reporting Lead and support engineering teams, including scheduling, resource allocation, and subcontractor management Ensure all works comply with statutory requirements, H&S legislation, and company procedures Conduct site audits, contract reviews, and performance meetings Identify opportunities for contract growth, additional works, and service improvements Prepare reports, proposals, and necessary documentation Skills & Experience Proven experience as a Contracts Manager (or similar role) within an M&E or HVAC maintenance environment Strong technical understanding of M&E and HVAC systems Excellent communication, client management, and negotiation skills Ability to manage multiple contracts and teams in a fast-paced environment Strong commercial awareness and experience managing contract budgets Knowledge of compliance requirements and health & safety standards Full UK driving licence What's On Offer Salary 50,000- 75,000 (DOE) Gross profit bonus - typically 10,000 6,000 car allowance 28 days holiday + Christmas shutdown + bank holidays Genuine organic progression within a growing business WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
17/01/2026
Full time
Contracts Manager M&E Maintenance We are seeking an experienced and proactive Contracts Manager to oversee the delivery of mechanical, electrical, and HVAC maintenance services across a diverse portfolio of commercial and industrial clients. This position plays a key role in ensuring all contracted works are delivered safely, efficiently, and in line with contractual, financial, and quality expectations. Key Responsibilities Manage end-to-end performance of multiple maintenance contracts, ensuring compliance with SLAs and KPIs Act as the primary client contact, building strong relationships and ensuring high customer satisfaction Oversee PPM, reactive maintenance, and minor project delivery across M&E and HVAC disciplines Monitor contract financials, including budgeting, forecasting, margin control, and reporting Lead and support engineering teams, including scheduling, resource allocation, and subcontractor management Ensure all works comply with statutory requirements, H&S legislation, and company procedures Conduct site audits, contract reviews, and performance meetings Identify opportunities for contract growth, additional works, and service improvements Prepare reports, proposals, and necessary documentation Skills & Experience Proven experience as a Contracts Manager (or similar role) within an M&E or HVAC maintenance environment Strong technical understanding of M&E and HVAC systems Excellent communication, client management, and negotiation skills Ability to manage multiple contracts and teams in a fast-paced environment Strong commercial awareness and experience managing contract budgets Knowledge of compliance requirements and health & safety standards Full UK driving licence What's On Offer Salary 50,000- 75,000 (DOE) Gross profit bonus - typically 10,000 6,000 car allowance 28 days holiday + Christmas shutdown + bank holidays Genuine organic progression within a growing business WR HVAC M&E are recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. WR is acting as an Employment Agency in relation to this vacancy.
Locogen is a renewable energy company providing end-to-end development services to our clients across the UK. Our vision is a world powered 100% by renewables; where everyone has access to affordable, sustainable energy and clean air. Our work is innovative and varied across Wind, Solar PV, Battery Storage (BESS) and Hydrogen. About our Principal Consultant / Solar Construction Project Manager role We are looking for an experienced Project Manager with experience in the development, design, procurement, construction and operation of commercial scale ground mount solar PV projects. You will be joining at a Principal level, supporting our clients as Client's PM / Owner's Engineer from consent through design, procurement and commissioning and take over across various sizes and scopes of projects. There is some travel to sites and to our Edinburgh office. Here's some of what you may be doing Plan, manage and deliver projects including: budget, schedule, scope, quality, risks, issues and changes on behalf of our clients. Provide input into design reviews. Preparetechnical specifications and scope of works(e.g.ground works, structural works, M&E infrastructure, HV electrical works). Lead and manage quality assurance, inspections and resolutions including snagging. Complete and hand over documentation. Manage the grid connection. Prepare, negotiate and manage contracts for BoP, EPC and ICP projects. Eensure contracts are managed according to their terms (applications for payment, variations, extensions to time for completion etc) and deal with contractor claims and disputes. Ensure working practices are compliant withLocogen's health & safety, environmental management system and industry best practice. Act in CDM roles with full understanding of the CDM regulations and other relevant constructionH& S legislation. What skills / Experience do you need? Essential: Significant experience in the development, design, procurement, construction and operation of commercial scale Solar PV projects. Experience working with EPC contractors, O&M providers or developers. Understandingof solar PV consultancy (feasibility, technical due diligence, operational performance). Strong understanding of owner's engineering, including design reviews, contractual compliance, and performance testing. Proficiency in solar performance monitoring, troubleshooting, and optimising operational plants. Understanding of UK energy market regulations, grid connection processes, and planning frameworks. Good working knowledge of engineering standards relevant to the design and construction of renewable energy projects. Good working knowledge of mechanical,electrical,and civil engineering. Experience managing ICPs and knowledge of the ICP process. FIDIC contract experience. Technical qualifications in Engineering or related discipline. H&S training in CDM, site management and risk assessment. Desirable: Familiarity with PPAs, revenue stacking, and financial modelling. Experience with energy storage integration and hybrid PV systems. Technical due diligence for investors, including assessment of risks and financial implications. Experience managing iDNOs. Experience of NEC4 contracts. Solar PV design, yield assessment, and technical due diligence. Competence in industry software, including PVsyst, Helioscope, AutoCAD, and GIS tools. Additional training in grid connections, energy storage, or hybrid PV systems. What is it like to work at Locogen? This role can be hybrid or remote. If hybrid, the office is dog friendly, modernly kitted out and has free parking. We are a multidisciplinary team of friendly, innovative, and creative experts who are passionate about renewable energy. We are informal. non-hierarchical, inclusive, open, and collaborative. Locogen is a place where everyone can grow and developwhiledoing innovative and interesting work. We love what we do and believe in empowering and trusting each other to deliver. We learn from our experiences, take accountability, and hold others to account. We are client focused and inspire each other to do the best we can. We like chattingand value communication with each other and our clients. We are a social bunch with regular get togethers. Benefits: Fully flexible hours with no fixed core hours 25 days holiday + 5 flexible bank holidays + 4 company closure days Work from anywhere up to 60 working days per year (20 days per time) Ongoing professional and personal development opportunities - training, memberships and education costs Private Health Insurance Life Assurance, Critical Illness, and Income Protection options Pension at 10% (5% employee/employer contribution split). Flexible for employees who want to opt out or contribute more of their salary Enhanced maternity and paternity policies Cycle to Work & EV Car Scheme Dog friendly office No candidate will meet every single desired criterion. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to hear from you. We are not using recruitment agencies for this vacancy - please apply directly.
17/01/2026
Full time
Locogen is a renewable energy company providing end-to-end development services to our clients across the UK. Our vision is a world powered 100% by renewables; where everyone has access to affordable, sustainable energy and clean air. Our work is innovative and varied across Wind, Solar PV, Battery Storage (BESS) and Hydrogen. About our Principal Consultant / Solar Construction Project Manager role We are looking for an experienced Project Manager with experience in the development, design, procurement, construction and operation of commercial scale ground mount solar PV projects. You will be joining at a Principal level, supporting our clients as Client's PM / Owner's Engineer from consent through design, procurement and commissioning and take over across various sizes and scopes of projects. There is some travel to sites and to our Edinburgh office. Here's some of what you may be doing Plan, manage and deliver projects including: budget, schedule, scope, quality, risks, issues and changes on behalf of our clients. Provide input into design reviews. Preparetechnical specifications and scope of works(e.g.ground works, structural works, M&E infrastructure, HV electrical works). Lead and manage quality assurance, inspections and resolutions including snagging. Complete and hand over documentation. Manage the grid connection. Prepare, negotiate and manage contracts for BoP, EPC and ICP projects. Eensure contracts are managed according to their terms (applications for payment, variations, extensions to time for completion etc) and deal with contractor claims and disputes. Ensure working practices are compliant withLocogen's health & safety, environmental management system and industry best practice. Act in CDM roles with full understanding of the CDM regulations and other relevant constructionH& S legislation. What skills / Experience do you need? Essential: Significant experience in the development, design, procurement, construction and operation of commercial scale Solar PV projects. Experience working with EPC contractors, O&M providers or developers. Understandingof solar PV consultancy (feasibility, technical due diligence, operational performance). Strong understanding of owner's engineering, including design reviews, contractual compliance, and performance testing. Proficiency in solar performance monitoring, troubleshooting, and optimising operational plants. Understanding of UK energy market regulations, grid connection processes, and planning frameworks. Good working knowledge of engineering standards relevant to the design and construction of renewable energy projects. Good working knowledge of mechanical,electrical,and civil engineering. Experience managing ICPs and knowledge of the ICP process. FIDIC contract experience. Technical qualifications in Engineering or related discipline. H&S training in CDM, site management and risk assessment. Desirable: Familiarity with PPAs, revenue stacking, and financial modelling. Experience with energy storage integration and hybrid PV systems. Technical due diligence for investors, including assessment of risks and financial implications. Experience managing iDNOs. Experience of NEC4 contracts. Solar PV design, yield assessment, and technical due diligence. Competence in industry software, including PVsyst, Helioscope, AutoCAD, and GIS tools. Additional training in grid connections, energy storage, or hybrid PV systems. What is it like to work at Locogen? This role can be hybrid or remote. If hybrid, the office is dog friendly, modernly kitted out and has free parking. We are a multidisciplinary team of friendly, innovative, and creative experts who are passionate about renewable energy. We are informal. non-hierarchical, inclusive, open, and collaborative. Locogen is a place where everyone can grow and developwhiledoing innovative and interesting work. We love what we do and believe in empowering and trusting each other to deliver. We learn from our experiences, take accountability, and hold others to account. We are client focused and inspire each other to do the best we can. We like chattingand value communication with each other and our clients. We are a social bunch with regular get togethers. Benefits: Fully flexible hours with no fixed core hours 25 days holiday + 5 flexible bank holidays + 4 company closure days Work from anywhere up to 60 working days per year (20 days per time) Ongoing professional and personal development opportunities - training, memberships and education costs Private Health Insurance Life Assurance, Critical Illness, and Income Protection options Pension at 10% (5% employee/employer contribution split). Flexible for employees who want to opt out or contribute more of their salary Enhanced maternity and paternity policies Cycle to Work & EV Car Scheme Dog friendly office No candidate will meet every single desired criterion. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to hear from you. We are not using recruitment agencies for this vacancy - please apply directly.
HAMILTON ROWE RECRUITMENT SERVICES LTD
City, London
Technical Service Manager London Bridge, City of London £70,000 - £75,000 We have a brilliant position for a Technical Service Manager to join a well established, well renowned building service provider to work on a state of the art, commercial site based at London Bridge. This is a standout role if you're looking to progress further within your managerial career. As a Technical Service Manager, you will ensure the day day operations of all electrical and mechanical plant equipment on site, within tenant and landlord areas, oversee a team of maintenance engineers, ensure KPIs and SLAs are achieved and oversee client management. Technical Service Manager Duties: Develop and implement an effective asset management strategy for all Mechanical and Electrical systems, ensuring compliance with statutory and industry standards. Lead and manage the engineering team and external service providers, including regular performance reviews, task delegation, and productivity monitoring. Ensuring contractual KPI and SLA's are achieved Monitor and optimise the use of BMS and CAFM tools to improve system performance and reporting. Conduct regular inspections of plant and equipment, identifying performance issues and implementing preventative solutions. Ensure health and safety compliance across all maintenance activities, including contractor management and emergency response procedures. Coordinate and supervise contractor works, ensuring quality control, technical guidance, and timely delivery. Respond to out-of-hours emergencies, troubleshoot plant and system failures, and implement effective solutions to minimise operational impact. Maintain accurate records and provide regular reports on asset performance, risks, and costs. Recruitment of staff Client liaison and management Technical Service Manager Requirements: Technically qualified - Apprenticeship, City & Guilds or industry recognised qualifications in Electrical Installations / Mechanical Engineering / Air Conditioning / HVAC Experience working within High end residential environments - Desirable Experience in managing contracts / engineering maintenance teams in a financial, data centre or critical environment Personable with good people skills, with the ability to communicate both verbally and in writing with all levels of staff and clients. Driven and motivated Computer skills Salary and Package: £70,000 - £75,000 per annum Travel allowance included 25 days annual leave + Bank holidays Company pension scheme Internal progression On-going training Join a market leading provider If you're interested in this Technical Service Manager, apply today!/ Posted by Alex Clark
17/01/2026
Full time
Technical Service Manager London Bridge, City of London £70,000 - £75,000 We have a brilliant position for a Technical Service Manager to join a well established, well renowned building service provider to work on a state of the art, commercial site based at London Bridge. This is a standout role if you're looking to progress further within your managerial career. As a Technical Service Manager, you will ensure the day day operations of all electrical and mechanical plant equipment on site, within tenant and landlord areas, oversee a team of maintenance engineers, ensure KPIs and SLAs are achieved and oversee client management. Technical Service Manager Duties: Develop and implement an effective asset management strategy for all Mechanical and Electrical systems, ensuring compliance with statutory and industry standards. Lead and manage the engineering team and external service providers, including regular performance reviews, task delegation, and productivity monitoring. Ensuring contractual KPI and SLA's are achieved Monitor and optimise the use of BMS and CAFM tools to improve system performance and reporting. Conduct regular inspections of plant and equipment, identifying performance issues and implementing preventative solutions. Ensure health and safety compliance across all maintenance activities, including contractor management and emergency response procedures. Coordinate and supervise contractor works, ensuring quality control, technical guidance, and timely delivery. Respond to out-of-hours emergencies, troubleshoot plant and system failures, and implement effective solutions to minimise operational impact. Maintain accurate records and provide regular reports on asset performance, risks, and costs. Recruitment of staff Client liaison and management Technical Service Manager Requirements: Technically qualified - Apprenticeship, City & Guilds or industry recognised qualifications in Electrical Installations / Mechanical Engineering / Air Conditioning / HVAC Experience working within High end residential environments - Desirable Experience in managing contracts / engineering maintenance teams in a financial, data centre or critical environment Personable with good people skills, with the ability to communicate both verbally and in writing with all levels of staff and clients. Driven and motivated Computer skills Salary and Package: £70,000 - £75,000 per annum Travel allowance included 25 days annual leave + Bank holidays Company pension scheme Internal progression On-going training Join a market leading provider If you're interested in this Technical Service Manager, apply today!/ Posted by Alex Clark
Fire Alarm Commissioning Manager Location: Site Based / Visiting Sites across the UK (London & South-based) Salary: £60,000 £65,000 per annum Package: Company Car Provided (no car allowance uplift) Working Hours: 8:00am 5:00pm (Standard Contract) Start Date: Ideally January / February Reporting To: Contracts Manager The Role We are seeking an experienced Fire Alarm Commissioning Manager to oversee the commissioning of Life Safety, Fire Detection, Fire Suppression, Sprinkler, Security, and Data Infrastructure systems across large-scale Industrial, Commercial, Residential, and Data Centre projects . This is a senior, site-focused role requiring strong technical leadership, programme control, and the ability to manage multi-discipline commissioning teams. The successful candidate will ensure all systems are fully integrated, tested, validated, and handed over in line with British, European, BAFE, BRE, NACOSS, and project-specific standards , while meeting demanding client timescales. Due to compliance requirements, candidates must have a strong Fire Alarm background and relevant training . Key Responsibilities Planning & Coordination Develop and manage detailed commissioning plans, programmes, procedures, and schedules for ELV and Life Safety systems (Fire Alarm, PAVA, CCTV, Access Control, Intruder, Disabled Systems, etc.). Review designs, specifications, and scopes to identify commissioning requirements and risks. Coordinate with design teams, project managers, subcontractors, vendors, and stakeholders to ensure commissioning readiness. Lead commissioning meetings, integration workshops, and progress reporting to senior management and clients. Plan and manage resources across multiple projects to avoid programme conflicts or overruns. Coordinate system integration workshops between life safety, security, sprinkler, fire suppression, and data systems. Commissioning Execution Lead and supervise commissioning engineers on site in line with the approved commissioning plan. Carry out weekly progress and resource reviews to ensure programme adherence. Oversee system programming, configuration, and integration (e.g. Fire Alarm interfacing with Access Control, BMS, and Data systems). Ensure all commissioning issues are logged, rectified, retested, and closed prior to handover. Manage commissioning gateways, punch lists, and close-out activities. Quality Assurance & Compliance Ensure full compliance with specifications, BAFE, BS, EN standards, and internal policies. Support the standardisation of commissioning processes across multiple projects. Coordinate third-party inspections, testing, and approvals. Maintain comprehensive QA/QC documentation including test sheets, witness statements, and reports. Review and validate commissioning scripts, method statements, and integrated test plans. Documentation & Handover Prepare and manage complete commissioning records, logs, defect reports, and evidence. Support the production of as-built drawings, O&M manuals, and client training. Oversee FAT, SAT, and final system handover. Ensure all commissioning evidence is captured via approved digital platforms (e.g. Dalux, BIM360, Cx Software, ATP). Leadership & Stakeholder Management Lead, mentor, and develop commissioning engineers and teams. Drive project close-outs with a strong focus on quality, safety, and zero defects. Communicate risks early, escalate blockers, and protect key milestones. Coordinate closely with M&E, BMS, electrical, mechanical, and other trades to ensure seamless integration. Provide expert technical support and troubleshooting throughout project delivery. Essential Requirements Minimum 5+ years experience commissioning medium to large-scale projects , ideally within Data Centres or large commercial environments. Proven experience commissioning Fire Detection, Voice Alarm (PAVA), Disabled Refuge Systems, Access Control, CCTV, and Intruder systems . Strong knowledge of British, European, BAFE, BRE, and NACOSS standards . CSCS Card and SMSTS certification. Deep understanding of fire strategies, redundancy philosophy, data hall uptime commissioning , and integrated systems testing. Experience managing multi-discipline commissioning teams and running commissioning workshops. Ability to work across multiple projects to tight deadlines. Strong communication, reporting, and client-facing skills. High attention to detail, strong organisation, and a proactive, delivery-focused mindset. IT-literate with good knowledge of Microsoft Office applications. Desirable FIA / NACOSS Advanced Installer & Advanced Commissioner training. First Aid certification. Experience with systems including: Fire Alarms: Gent, WINMAG, DRAX, Advanced, Siemens, FAAST, Xtralis, Apollo PAVA: Honeywell, Baldwin Boxall Disabled Systems: Baldwin Boxall, C-TEC Security Systems: Milestone, Xplan, CCure, AMAG, Lenel, Hikvision, Axis, Galaxy, Comelit, Commend M&E coordination experience. Previous experience within Fire, Security, or Data Infrastructure sectors.
17/01/2026
Full time
Fire Alarm Commissioning Manager Location: Site Based / Visiting Sites across the UK (London & South-based) Salary: £60,000 £65,000 per annum Package: Company Car Provided (no car allowance uplift) Working Hours: 8:00am 5:00pm (Standard Contract) Start Date: Ideally January / February Reporting To: Contracts Manager The Role We are seeking an experienced Fire Alarm Commissioning Manager to oversee the commissioning of Life Safety, Fire Detection, Fire Suppression, Sprinkler, Security, and Data Infrastructure systems across large-scale Industrial, Commercial, Residential, and Data Centre projects . This is a senior, site-focused role requiring strong technical leadership, programme control, and the ability to manage multi-discipline commissioning teams. The successful candidate will ensure all systems are fully integrated, tested, validated, and handed over in line with British, European, BAFE, BRE, NACOSS, and project-specific standards , while meeting demanding client timescales. Due to compliance requirements, candidates must have a strong Fire Alarm background and relevant training . Key Responsibilities Planning & Coordination Develop and manage detailed commissioning plans, programmes, procedures, and schedules for ELV and Life Safety systems (Fire Alarm, PAVA, CCTV, Access Control, Intruder, Disabled Systems, etc.). Review designs, specifications, and scopes to identify commissioning requirements and risks. Coordinate with design teams, project managers, subcontractors, vendors, and stakeholders to ensure commissioning readiness. Lead commissioning meetings, integration workshops, and progress reporting to senior management and clients. Plan and manage resources across multiple projects to avoid programme conflicts or overruns. Coordinate system integration workshops between life safety, security, sprinkler, fire suppression, and data systems. Commissioning Execution Lead and supervise commissioning engineers on site in line with the approved commissioning plan. Carry out weekly progress and resource reviews to ensure programme adherence. Oversee system programming, configuration, and integration (e.g. Fire Alarm interfacing with Access Control, BMS, and Data systems). Ensure all commissioning issues are logged, rectified, retested, and closed prior to handover. Manage commissioning gateways, punch lists, and close-out activities. Quality Assurance & Compliance Ensure full compliance with specifications, BAFE, BS, EN standards, and internal policies. Support the standardisation of commissioning processes across multiple projects. Coordinate third-party inspections, testing, and approvals. Maintain comprehensive QA/QC documentation including test sheets, witness statements, and reports. Review and validate commissioning scripts, method statements, and integrated test plans. Documentation & Handover Prepare and manage complete commissioning records, logs, defect reports, and evidence. Support the production of as-built drawings, O&M manuals, and client training. Oversee FAT, SAT, and final system handover. Ensure all commissioning evidence is captured via approved digital platforms (e.g. Dalux, BIM360, Cx Software, ATP). Leadership & Stakeholder Management Lead, mentor, and develop commissioning engineers and teams. Drive project close-outs with a strong focus on quality, safety, and zero defects. Communicate risks early, escalate blockers, and protect key milestones. Coordinate closely with M&E, BMS, electrical, mechanical, and other trades to ensure seamless integration. Provide expert technical support and troubleshooting throughout project delivery. Essential Requirements Minimum 5+ years experience commissioning medium to large-scale projects , ideally within Data Centres or large commercial environments. Proven experience commissioning Fire Detection, Voice Alarm (PAVA), Disabled Refuge Systems, Access Control, CCTV, and Intruder systems . Strong knowledge of British, European, BAFE, BRE, and NACOSS standards . CSCS Card and SMSTS certification. Deep understanding of fire strategies, redundancy philosophy, data hall uptime commissioning , and integrated systems testing. Experience managing multi-discipline commissioning teams and running commissioning workshops. Ability to work across multiple projects to tight deadlines. Strong communication, reporting, and client-facing skills. High attention to detail, strong organisation, and a proactive, delivery-focused mindset. IT-literate with good knowledge of Microsoft Office applications. Desirable FIA / NACOSS Advanced Installer & Advanced Commissioner training. First Aid certification. Experience with systems including: Fire Alarms: Gent, WINMAG, DRAX, Advanced, Siemens, FAAST, Xtralis, Apollo PAVA: Honeywell, Baldwin Boxall Disabled Systems: Baldwin Boxall, C-TEC Security Systems: Milestone, Xplan, CCure, AMAG, Lenel, Hikvision, Axis, Galaxy, Comelit, Commend M&E coordination experience. Previous experience within Fire, Security, or Data Infrastructure sectors.
An award-winning and long-established multidisciplinary consultancy, known for delivering high-profile commercial, healthcare and mixed-use developments, is seeking a skilled M&E Quantity Surveyor to join their London office. This is a client-facing role offering exposure to a wide range of mechanical and electrical projects, with responsibilities spanning the full project lifecycle. Operating across a broad spectrum of sectors, this consultancy has built a reputation for technical excellence in the delivery of complex building services packages. They are now looking for an M&E Quantity Surveyor with strong cost management expertise to support a growing pipeline of commercial, education and healthcare schemes across London and the South East. M&E Quantity Surveyor Role The successful M&E Quantity Surveyor will take ownership of pre- and post-contract duties on MEP packages, working closely with project managers and design teams to deliver accurate cost advice and ensure commercial control. The role requires an individual confident in managing subcontractor accounts, preparing detailed cost plans, and contributing to value engineering exercises. This is a fantastic opportunity for an M&E Quantity Surveyor seeking progression within a dynamic and respected consultancy, offering structured development and long-term career prospects. M&E Quantity Surveyor - Key Responsibilities Preparation of detailed cost plans and MEP estimates during design stages Manage procurement of M&E works, including tender analysis and recommendations Oversee post-contract commercial management including valuations and change control Monitor subcontractor performance and manage interim and final accounts Liaise with clients, consultants and contractors to ensure clear financial reporting Contribute to risk and value management throughout the project lifecycle M&E Quantity Surveyor - Candidate Requirements Minimum 4 years' experience in a Quantity Surveyor role with a focus on M&E Strong knowledge of building services cost planning and procurement Consultancy or client-side background preferred Relevant industry qualifications - BSc Quantity Surveying or equivalent (MRICS desirable) Sound understanding of JCT and NEC contracts Excellent communication and negotiation skills In Return £45,000 - £55,000 salary depending on experience 25 days holiday plus bank holidays Hybrid working policy Ongoing training and professional development Clear pathway for career progression within a supportive team If you are a Quantity Surveyor considering your career opportunities, then please contact Dan McEvoy at Brandon James. Reference
16/01/2026
Full time
An award-winning and long-established multidisciplinary consultancy, known for delivering high-profile commercial, healthcare and mixed-use developments, is seeking a skilled M&E Quantity Surveyor to join their London office. This is a client-facing role offering exposure to a wide range of mechanical and electrical projects, with responsibilities spanning the full project lifecycle. Operating across a broad spectrum of sectors, this consultancy has built a reputation for technical excellence in the delivery of complex building services packages. They are now looking for an M&E Quantity Surveyor with strong cost management expertise to support a growing pipeline of commercial, education and healthcare schemes across London and the South East. M&E Quantity Surveyor Role The successful M&E Quantity Surveyor will take ownership of pre- and post-contract duties on MEP packages, working closely with project managers and design teams to deliver accurate cost advice and ensure commercial control. The role requires an individual confident in managing subcontractor accounts, preparing detailed cost plans, and contributing to value engineering exercises. This is a fantastic opportunity for an M&E Quantity Surveyor seeking progression within a dynamic and respected consultancy, offering structured development and long-term career prospects. M&E Quantity Surveyor - Key Responsibilities Preparation of detailed cost plans and MEP estimates during design stages Manage procurement of M&E works, including tender analysis and recommendations Oversee post-contract commercial management including valuations and change control Monitor subcontractor performance and manage interim and final accounts Liaise with clients, consultants and contractors to ensure clear financial reporting Contribute to risk and value management throughout the project lifecycle M&E Quantity Surveyor - Candidate Requirements Minimum 4 years' experience in a Quantity Surveyor role with a focus on M&E Strong knowledge of building services cost planning and procurement Consultancy or client-side background preferred Relevant industry qualifications - BSc Quantity Surveying or equivalent (MRICS desirable) Sound understanding of JCT and NEC contracts Excellent communication and negotiation skills In Return £45,000 - £55,000 salary depending on experience 25 days holiday plus bank holidays Hybrid working policy Ongoing training and professional development Clear pathway for career progression within a supportive team If you are a Quantity Surveyor considering your career opportunities, then please contact Dan McEvoy at Brandon James. Reference
Site Manager page is loaded Site Managerlocations: Londontime type: Full timeposted on: Posted Todaytime left to apply: End Date: January 31, 2026 (30+ days left to apply)job requisition id: JR33667 Job TitleSite Manager Job Description Reports to: Construction Manager / Construction Group Leader UK Location: London - Heathrow Contract Type: Permanent Introduction to role Vanderlande is a global market leader in material handling systems. Working within projects, the Site Manager will be responsible for the management and delivery of both baggage and civils/MEP work packages in line with the programme schedule operating inside the VI site management structure within large and complex projects.A Site Manager will primarily organise, drive, and manage the safe and efficient execution of the project construction work packages through management of a team of senior site supervisors and wider project site team and is responsible for ensuring safe, appropriate and optimal site conditions are established that facilitate right first time zero defects installation at the required rate of installation.Possession of a comprehensive industry knowledge will be key in ensuring success demonstrated through cross disciplinary strengths, conflict resolution and previous experience of successful delivery within large/complex baggage projects. Proactively driving a Stay Safe culture and right first-time delivery ensuring the project teams and associated supply chain inclusive of subcontractors and third parties understand and implement expected safe working practices during the execution of site delivery phases and work activities of the project. Role Responsibilities As a Site Manager, you will play a critical role in overseeing and coordinating project installation activities to ensure the successful delivery of our baggage handling system projects. You will be responsible for drawing up site plans, monitoring performance, managing stakeholder interactions, and ensuring adherence to quality and safety standards. This role requires strong leadership skills, technical expertise, and a proactive approach to problem-solving. Your responsibilities and activities will include: Lead the development of comprehensive project installation plans in collaboration with the Project Manager, encompassing objectives, organisation, planning, and cost calculations. Monitor Installation quality, timelines, and costs to ensure compliance with standards and budget constraints while providing timely information to stakeholders. Identify, analyse, and address potential problems, risks, and opportunities through proactive corrective and preventive actions, optimising project outcomes. Manage interactions with all project stakeholders to facilitate smooth coordination and communication, ensuring alignment with project goals and objectives. Provide regular and accurate reports to customers, Project Managers, keeping stakeholders informed of installation progress and key milestones. Advise and oversee contracts with Electrical & Mechanical (E&M) subcontractors, ensuring compliance with project specifications and requirements. Ensure adherence to the Vanderlande Process Map and initiate improvements in site management processes to enhance efficiency and effectiveness. Drive continuous improvement initiatives within the project team, identifying areas for enhancement and implementing best practices to optimize project outcomes. Lead and mentor a team of supervisors throughout the project lifecycle, fostering a collaborative and high-performing work environment. Promote a strong culture of safety among project teams, emphasizing adherence to safety protocols and practices to ensure a safe working environment Organize and facilitate all support activities to ensure a smooth high-quality handover to commissioning and support commissioning & testing teams until handover to the customer Analyse projects and prepare site logistics proposals, including logistics planning and management. Prepare sites and assess areas for installation readiness. Create detailed site logistics and management plans. Oversee installation, and handover of steelwork and manage rest materials (reverse logistics) Manage electrical and EM (Electromechanical) installations, including inspections and testing Manage field wiring tests before and after power-on, including safety-related tests Oversee power-up procedures Manage mechanical static inspections and I/O (Input/Output) tests Conduct safety inspections and ensure compliance with safety protocol Oversee Logistics and materials being receiving on-site Checking the readiness of project areas and the criteria for commissioning and installation/testing stages. Verifying Entry Criteria for Commissioning and Installation & Testing Stages Collaborating on the creation of Health, Safety, and Environment (HSE) Plans Collecting HSE Plans from sub-contractors. Developing the initial Master Schedule Creating the Installation File Requesting quotes from supply centres Updating Schedules (Detail, Supply & Installation; Testing & Commission) Handling sales requests for supply centres Role Qualification and Skills Experience in successfully managing teams during delivery of medium and large Automated Material Handling or Baggage Handling System projects. Successful proven management on of all phases within a project lifecycle, ranging from pre-construction through to handover Managing a multi-functional team, interfacing with clients where appropriate, and chairing meetings locally at site level as required. Adept at conflict resolution Possess an awareness and understanding of CDM Regulations and HASWA. Possess the ability to understand engineering drawings, specifications, layouts and successfully interpret project schedules Ability to create robust site planning to complement the master project schedule through owning last planner activities and management of the Look ahead schedule What we offer 28 days of annual leave (excluding public holidays) Bupa Medical Cover YuLife - Wellbeing membership with fast access to GP appointments, promotion of health and wellbeing along with daily quests to gain Yucoins that can be swapped for shopping vouchers A challenging work environment with lots of opportunities of career progression. Cycle to work scheme Pension with Aviva Achievers - Employee recognition platform Diversity & Inclusion Vanderlande is an equal opportunity/affirmative action employer. Qualifies applicants will be considered without regards to race, religion, color, national origin, gender, sexual orientation, age marital status or disability status. If you feel there is a barrier that potentially prevents you from applying, we are always happy to discuss or explore, any reasonable adjustments can be made to support your application. Aspire. Grow. Achieve. Together Are you looking to develop your career and satisfy your ambitions at a company where you can aspire to new heights, enjoy personal growth and thrive on achievement environment. We are the global market leader for future-proof logistic process automation at airports - from London Heathrow to Singapore Changi - and in the parcel market for leading players such as UPS and FedEx. Furthermore, we are also a leading supplier of solutions for warehousing giants, including Walmart, which seamlessly integrate innovative systems, intelligent software, and life-cycle services.If you aspire to a position of responsibility and want to make a difference by facilitating the delivery of what matters most to consumers, passengers, and businesses, the next step on your path to global opportunities is to join Vanderlande. As part of our network and unique culture of freedom and flexibility, you will be able to express yourself and
16/01/2026
Full time
Site Manager page is loaded Site Managerlocations: Londontime type: Full timeposted on: Posted Todaytime left to apply: End Date: January 31, 2026 (30+ days left to apply)job requisition id: JR33667 Job TitleSite Manager Job Description Reports to: Construction Manager / Construction Group Leader UK Location: London - Heathrow Contract Type: Permanent Introduction to role Vanderlande is a global market leader in material handling systems. Working within projects, the Site Manager will be responsible for the management and delivery of both baggage and civils/MEP work packages in line with the programme schedule operating inside the VI site management structure within large and complex projects.A Site Manager will primarily organise, drive, and manage the safe and efficient execution of the project construction work packages through management of a team of senior site supervisors and wider project site team and is responsible for ensuring safe, appropriate and optimal site conditions are established that facilitate right first time zero defects installation at the required rate of installation.Possession of a comprehensive industry knowledge will be key in ensuring success demonstrated through cross disciplinary strengths, conflict resolution and previous experience of successful delivery within large/complex baggage projects. Proactively driving a Stay Safe culture and right first-time delivery ensuring the project teams and associated supply chain inclusive of subcontractors and third parties understand and implement expected safe working practices during the execution of site delivery phases and work activities of the project. Role Responsibilities As a Site Manager, you will play a critical role in overseeing and coordinating project installation activities to ensure the successful delivery of our baggage handling system projects. You will be responsible for drawing up site plans, monitoring performance, managing stakeholder interactions, and ensuring adherence to quality and safety standards. This role requires strong leadership skills, technical expertise, and a proactive approach to problem-solving. Your responsibilities and activities will include: Lead the development of comprehensive project installation plans in collaboration with the Project Manager, encompassing objectives, organisation, planning, and cost calculations. Monitor Installation quality, timelines, and costs to ensure compliance with standards and budget constraints while providing timely information to stakeholders. Identify, analyse, and address potential problems, risks, and opportunities through proactive corrective and preventive actions, optimising project outcomes. Manage interactions with all project stakeholders to facilitate smooth coordination and communication, ensuring alignment with project goals and objectives. Provide regular and accurate reports to customers, Project Managers, keeping stakeholders informed of installation progress and key milestones. Advise and oversee contracts with Electrical & Mechanical (E&M) subcontractors, ensuring compliance with project specifications and requirements. Ensure adherence to the Vanderlande Process Map and initiate improvements in site management processes to enhance efficiency and effectiveness. Drive continuous improvement initiatives within the project team, identifying areas for enhancement and implementing best practices to optimize project outcomes. Lead and mentor a team of supervisors throughout the project lifecycle, fostering a collaborative and high-performing work environment. Promote a strong culture of safety among project teams, emphasizing adherence to safety protocols and practices to ensure a safe working environment Organize and facilitate all support activities to ensure a smooth high-quality handover to commissioning and support commissioning & testing teams until handover to the customer Analyse projects and prepare site logistics proposals, including logistics planning and management. Prepare sites and assess areas for installation readiness. Create detailed site logistics and management plans. Oversee installation, and handover of steelwork and manage rest materials (reverse logistics) Manage electrical and EM (Electromechanical) installations, including inspections and testing Manage field wiring tests before and after power-on, including safety-related tests Oversee power-up procedures Manage mechanical static inspections and I/O (Input/Output) tests Conduct safety inspections and ensure compliance with safety protocol Oversee Logistics and materials being receiving on-site Checking the readiness of project areas and the criteria for commissioning and installation/testing stages. Verifying Entry Criteria for Commissioning and Installation & Testing Stages Collaborating on the creation of Health, Safety, and Environment (HSE) Plans Collecting HSE Plans from sub-contractors. Developing the initial Master Schedule Creating the Installation File Requesting quotes from supply centres Updating Schedules (Detail, Supply & Installation; Testing & Commission) Handling sales requests for supply centres Role Qualification and Skills Experience in successfully managing teams during delivery of medium and large Automated Material Handling or Baggage Handling System projects. Successful proven management on of all phases within a project lifecycle, ranging from pre-construction through to handover Managing a multi-functional team, interfacing with clients where appropriate, and chairing meetings locally at site level as required. Adept at conflict resolution Possess an awareness and understanding of CDM Regulations and HASWA. Possess the ability to understand engineering drawings, specifications, layouts and successfully interpret project schedules Ability to create robust site planning to complement the master project schedule through owning last planner activities and management of the Look ahead schedule What we offer 28 days of annual leave (excluding public holidays) Bupa Medical Cover YuLife - Wellbeing membership with fast access to GP appointments, promotion of health and wellbeing along with daily quests to gain Yucoins that can be swapped for shopping vouchers A challenging work environment with lots of opportunities of career progression. Cycle to work scheme Pension with Aviva Achievers - Employee recognition platform Diversity & Inclusion Vanderlande is an equal opportunity/affirmative action employer. Qualifies applicants will be considered without regards to race, religion, color, national origin, gender, sexual orientation, age marital status or disability status. If you feel there is a barrier that potentially prevents you from applying, we are always happy to discuss or explore, any reasonable adjustments can be made to support your application. Aspire. Grow. Achieve. Together Are you looking to develop your career and satisfy your ambitions at a company where you can aspire to new heights, enjoy personal growth and thrive on achievement environment. We are the global market leader for future-proof logistic process automation at airports - from London Heathrow to Singapore Changi - and in the parcel market for leading players such as UPS and FedEx. Furthermore, we are also a leading supplier of solutions for warehousing giants, including Walmart, which seamlessly integrate innovative systems, intelligent software, and life-cycle services.If you aspire to a position of responsibility and want to make a difference by facilitating the delivery of what matters most to consumers, passengers, and businesses, the next step on your path to global opportunities is to join Vanderlande. As part of our network and unique culture of freedom and flexibility, you will be able to express yourself and
About The Company OCS UK & Ireland is a leading facilities management company with 50,000+ colleagues and a turnover in excess of £2bn. We deliver innovative, award-winning services within facilities management, hard services, cleaning, security and catering. Our mission is to make people and places the best they can be for our colleagues, customers and the communities we serve. Our commitment to doing business the right way is rooted in our TRUE values - Trust, Respect, Unity, and Empowerment. About The Role To support their line manager in the delivery of the existing FM contracts. This will be achieved via the practical implementation of the company's management system and the utilisation of the Electricians knowledge. Responsibilities Take an active role in the management of all quality, environmental and health & safety issues on the site for which he/she is responsible in compliance with company policies and arrange Compliance with contractual requirements. Ensure the Planned Preventative and Reactive maintenance are carried out to the correct specification with regards to both frequency and quality. Organise and manage the mechanical and electrical maintenance schedule in compliance with current legislation and as detailed in the CAFM system. Organise and manage external maintenance contractors to ensure mechanical, electrical, and building fabric maintenance schedules are carried out in accordance with current legislation and as detailed in the CAFM system. Client satisfaction and the quality of service provided. Identifying and implementing innovations to improve service delivery. Ensuring continuity of systems in a manner, which fully complies with all legal, qualitative, health, safety and environmental standards and other relevant guidance. To ensure that tools, equipment, and materials are available as and when required to ensure the effective delivery of the service. Assist with Sub-Contractor management and monitoring. Ensuring, demonstrate, review, and monitor compliance, to meet the expectation and needs of the Client, the quality and organisational goals of the company and satisfy the requirements of BS EN IS0 9001:2015. Ensuring the availability of and participating personally in the provision of a 24 hour per day 365 days per year emergency on call service as required. Be prepared to work overtime where required to support the contract. Generally, take ownership of and deal with all facilities related on the FES contracted sites. This will include regular interface with a variety of contractors including but not limited to Cleaners, Ground's maintenance, Electrical, Mechanical etc. Assist Supervisor with project planning These duties and responsibilities may be changed from time to time in accordance with the needs of the Company In particular the post holder may be required to provide support to holders of other posts according to changes in workload and patterns of working. This is a summary of the main areas of the job and will be subject to periodic review in conjunction with the post holder; and detailed objectives will be set periodically, in conjunction with your Line Manager, to which post is accountable. Skills & Knowledge Formal technical education in Mechanical/electrical discipline. A minimum of 5 years post training or fully indentured Electrical Craft Apprenticeship C&G 2360/1&2 (or similar recognised training) A Full driving license. Understanding of asset management principals and maintenance techniques. Experience of operating a management system i.e. ISO 9001:2000, 14001, 18001. A strong working knowledge of Health & Safety principles including Risk Assessment, COSHH etc. A pro-active attitude. Excellent planning skills. Good IT/computer skills. Excellent communication skills including verbal and the written word. The ability to form relationships with clients and to exceed customer expectation. Approachable demeanour and a demonstrable commitment to team working. Consistently works to a high standard and looks for ways to improve current working practices and processes to meet the needs of the business. High levels of self-motivation, technical inquisitiveness, enthusiasm, and commitment A track record of delivering similar roles. A commitment to continuing professional development in relation to themselves. A formal H&S qualification i.e., IOSH managing safety certificate or similar would be useful. Apply If you are interested in joining a business that encourages professional development, career progression and the chance to work with inspirational people then please click apply and register your interest! You can also sign up to our job alerts when registering which will notify you when other suitable vacancies are available. We are an equal opportunities employer and rely on a diverse workforce with a broad range of knowledge, skills, and backgrounds to deliver our goals. We offer an inclusive and welcoming environment and actively encourage applications from all individuals regardless of race, gender, nationality, religion, sexual orientation, disability, or age.
16/01/2026
Full time
About The Company OCS UK & Ireland is a leading facilities management company with 50,000+ colleagues and a turnover in excess of £2bn. We deliver innovative, award-winning services within facilities management, hard services, cleaning, security and catering. Our mission is to make people and places the best they can be for our colleagues, customers and the communities we serve. Our commitment to doing business the right way is rooted in our TRUE values - Trust, Respect, Unity, and Empowerment. About The Role To support their line manager in the delivery of the existing FM contracts. This will be achieved via the practical implementation of the company's management system and the utilisation of the Electricians knowledge. Responsibilities Take an active role in the management of all quality, environmental and health & safety issues on the site for which he/she is responsible in compliance with company policies and arrange Compliance with contractual requirements. Ensure the Planned Preventative and Reactive maintenance are carried out to the correct specification with regards to both frequency and quality. Organise and manage the mechanical and electrical maintenance schedule in compliance with current legislation and as detailed in the CAFM system. Organise and manage external maintenance contractors to ensure mechanical, electrical, and building fabric maintenance schedules are carried out in accordance with current legislation and as detailed in the CAFM system. Client satisfaction and the quality of service provided. Identifying and implementing innovations to improve service delivery. Ensuring continuity of systems in a manner, which fully complies with all legal, qualitative, health, safety and environmental standards and other relevant guidance. To ensure that tools, equipment, and materials are available as and when required to ensure the effective delivery of the service. Assist with Sub-Contractor management and monitoring. Ensuring, demonstrate, review, and monitor compliance, to meet the expectation and needs of the Client, the quality and organisational goals of the company and satisfy the requirements of BS EN IS0 9001:2015. Ensuring the availability of and participating personally in the provision of a 24 hour per day 365 days per year emergency on call service as required. Be prepared to work overtime where required to support the contract. Generally, take ownership of and deal with all facilities related on the FES contracted sites. This will include regular interface with a variety of contractors including but not limited to Cleaners, Ground's maintenance, Electrical, Mechanical etc. Assist Supervisor with project planning These duties and responsibilities may be changed from time to time in accordance with the needs of the Company In particular the post holder may be required to provide support to holders of other posts according to changes in workload and patterns of working. This is a summary of the main areas of the job and will be subject to periodic review in conjunction with the post holder; and detailed objectives will be set periodically, in conjunction with your Line Manager, to which post is accountable. Skills & Knowledge Formal technical education in Mechanical/electrical discipline. A minimum of 5 years post training or fully indentured Electrical Craft Apprenticeship C&G 2360/1&2 (or similar recognised training) A Full driving license. Understanding of asset management principals and maintenance techniques. Experience of operating a management system i.e. ISO 9001:2000, 14001, 18001. A strong working knowledge of Health & Safety principles including Risk Assessment, COSHH etc. A pro-active attitude. Excellent planning skills. Good IT/computer skills. Excellent communication skills including verbal and the written word. The ability to form relationships with clients and to exceed customer expectation. Approachable demeanour and a demonstrable commitment to team working. Consistently works to a high standard and looks for ways to improve current working practices and processes to meet the needs of the business. High levels of self-motivation, technical inquisitiveness, enthusiasm, and commitment A track record of delivering similar roles. A commitment to continuing professional development in relation to themselves. A formal H&S qualification i.e., IOSH managing safety certificate or similar would be useful. Apply If you are interested in joining a business that encourages professional development, career progression and the chance to work with inspirational people then please click apply and register your interest! You can also sign up to our job alerts when registering which will notify you when other suitable vacancies are available. We are an equal opportunities employer and rely on a diverse workforce with a broad range of knowledge, skills, and backgrounds to deliver our goals. We offer an inclusive and welcoming environment and actively encourage applications from all individuals regardless of race, gender, nationality, religion, sexual orientation, disability, or age.
FERROVIAL CONSTRUCTION (UK) LIMITED
City, Birmingham
Rail Systems Design Integration Lead Role Department: Engineering/Design Reports to: Design Integration and Technical Assurance Manager Management Responsibility: RAM Manager, System Safety Lead, Interoperability Lead, Electrical Engineering (EMC and E&B), functional management of integration lead for Standard track, Resilient track and Calvert IMD Project Overview: The Ferrovial BAM Joint Venture has a successful history of delivering critical infrastructure for the UK on time and to budget together in joint venture partnership. They first worked together in 2010 as BFK, delivering three Crossrail contracts, including the longest stretch of tunnelling works between Royal Oak and Farringdon and Farringdon Station, the first central station to be completed on the Elizabeth Line. The team is also delivering the Silvertown Tunnel project together in East London and has been delivering excellence at each stage of HS2, such as Fusion JV for the Enabling Works packages, EKFB for the central Main Works Contract and now delivering the track infrastructure across the entire HS2 route. We are now recruiting for a Rail Systems Design Integration Lead to join the HS2 Track infrastructure project at the initial design phase which will run concurrently with the completion of main works contracts, which are now at their peak. The team operate under a collaborative Rail Systems Alliance structure, designed to manage interfaces and resolve any program conflicts. The members will work together on design, access, resources, and logistics to achieve shared goals for cost and schedule. Key responsibilities To lead the management and coordination of all design interfaces between the Contractor s systems scope and other HS2 contractors (Rail Systems, Civils, Stations) as well as with the Client, ensuring technical consistency, contractual compliance and integrated assurance. Responsible for developing, implementing and maintaining the relevant parts of the Interface Management Plan and for the processes and/or procedures for railway systems designs integration. Accountability for ensuring and overseeing the development of the management plans in respect of RAM, System Safety, Interoperability, Security management, and the required processes and procedures. Manage the system integration processes from design to construction. Manage System level Functional and Architecture Specifications and interface control documents. Be responsible for the consistency of the sub-systems deliverables across all projects and contribute towards the standardisation of specifications for sub-systems. Implement efficient processes to manage system safety (including CDM, CSM-RA and interoperability), Verification and Validation (V&V) and system assurance. Responsible for developing and maintaining the Interface Control Documents (ICDs) for the railway systems design interfaces, and for coordinating and overseeing the development and maintenance of ICDs for other design interfaces. Coordinate with other contractors (Railways Systems, Main Works), Client, Designers and internal teams to identify, document and ensure resolution of design interfaces and systems integration. Act as the primary point of contact for technical coordination across interfaces. Management of subordinate roles Direct and oversee the work of the RAM (Reliability, Availability, Maintainability), System Safety, Interoperability and Security Lead (s) to ensure coherent and coordinated system safety management, interoperability, interface management, requirements compliance and assurance evidence. Support and/or conduct design reviews, coordination meetings, HAZID/HAZOP workshops and formal assurance reviews and submissions (e.g. to HS2 and AsBO). Manage resolution of interface comments across stakeholders. Programme and Information coordination Ensure interface and systems integration milestones are tracked and managed within the design delivery and assurance schedule. Coordinate the supply chain to support the achievement of an efficient and compliant design, and for evidencing progressive technical assurance during design, construction and handover. Close liaison with the design supply chain to ensure the delivery of these interfaces and deliverables associated with the managed disciplines (RAM, System Safety, Interoperability, Electrical Engineering (EMC and E&B and Security as per the programme and budgetary constraints, and in accordance with the client s requirement. Coordination with the broader interface management team, assurance team, design delivery team (alignment and effective delivery on time and within budgetary constraints) construction and logistic teams. Attend weekly meetings with the broader design, systems safety and construction teams and client in Birmingham / London. Chairing regular railways systems / civils systems integration meetings. Support the client with identifying change, risk and opportunities and constantly striving for efficiencies and cost savings. Support the link and coordination with construction teams for management of design and systems interface-related issues. Provide technical input and support to relevant commercial communications (SNCs, NCRs, CEs, Departures, etc) Key Skills and qualifications Degree in Civil or Mechanical Engineering (or related field) Chartered IMEC, PWA Institute or CEng ICE desirable Experience in major multi-disciplinary rail projects. Experience in high-speed railway projects, design and build projects, and UK projects will be valuable. Demonstrated experience managing design integration, technical interfaces and inter-contractor coordination. Proficient in design coordination, design interface management and assurance documentation in railway projects. Excellent knowledge of railway systems, operating requirements, available equipment and systems. Knowledge of system safety, interoperability and RAM disciplines, processes and legal frameworks and related regulations (CDM, CSM, RIR). Strong communication, leadership and management skills, with a positive and collaborative approach. Enthusiastic team player, able to listen, understand, engage and motivate, and with confidence to make decisions when required. Focus on efficiency and driving delivery. Practical experience of harmonising design and quality requirements with buildability. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a Protected Class ), or any other protected class in accordance with applicable laws.
16/01/2026
Full time
Rail Systems Design Integration Lead Role Department: Engineering/Design Reports to: Design Integration and Technical Assurance Manager Management Responsibility: RAM Manager, System Safety Lead, Interoperability Lead, Electrical Engineering (EMC and E&B), functional management of integration lead for Standard track, Resilient track and Calvert IMD Project Overview: The Ferrovial BAM Joint Venture has a successful history of delivering critical infrastructure for the UK on time and to budget together in joint venture partnership. They first worked together in 2010 as BFK, delivering three Crossrail contracts, including the longest stretch of tunnelling works between Royal Oak and Farringdon and Farringdon Station, the first central station to be completed on the Elizabeth Line. The team is also delivering the Silvertown Tunnel project together in East London and has been delivering excellence at each stage of HS2, such as Fusion JV for the Enabling Works packages, EKFB for the central Main Works Contract and now delivering the track infrastructure across the entire HS2 route. We are now recruiting for a Rail Systems Design Integration Lead to join the HS2 Track infrastructure project at the initial design phase which will run concurrently with the completion of main works contracts, which are now at their peak. The team operate under a collaborative Rail Systems Alliance structure, designed to manage interfaces and resolve any program conflicts. The members will work together on design, access, resources, and logistics to achieve shared goals for cost and schedule. Key responsibilities To lead the management and coordination of all design interfaces between the Contractor s systems scope and other HS2 contractors (Rail Systems, Civils, Stations) as well as with the Client, ensuring technical consistency, contractual compliance and integrated assurance. Responsible for developing, implementing and maintaining the relevant parts of the Interface Management Plan and for the processes and/or procedures for railway systems designs integration. Accountability for ensuring and overseeing the development of the management plans in respect of RAM, System Safety, Interoperability, Security management, and the required processes and procedures. Manage the system integration processes from design to construction. Manage System level Functional and Architecture Specifications and interface control documents. Be responsible for the consistency of the sub-systems deliverables across all projects and contribute towards the standardisation of specifications for sub-systems. Implement efficient processes to manage system safety (including CDM, CSM-RA and interoperability), Verification and Validation (V&V) and system assurance. Responsible for developing and maintaining the Interface Control Documents (ICDs) for the railway systems design interfaces, and for coordinating and overseeing the development and maintenance of ICDs for other design interfaces. Coordinate with other contractors (Railways Systems, Main Works), Client, Designers and internal teams to identify, document and ensure resolution of design interfaces and systems integration. Act as the primary point of contact for technical coordination across interfaces. Management of subordinate roles Direct and oversee the work of the RAM (Reliability, Availability, Maintainability), System Safety, Interoperability and Security Lead (s) to ensure coherent and coordinated system safety management, interoperability, interface management, requirements compliance and assurance evidence. Support and/or conduct design reviews, coordination meetings, HAZID/HAZOP workshops and formal assurance reviews and submissions (e.g. to HS2 and AsBO). Manage resolution of interface comments across stakeholders. Programme and Information coordination Ensure interface and systems integration milestones are tracked and managed within the design delivery and assurance schedule. Coordinate the supply chain to support the achievement of an efficient and compliant design, and for evidencing progressive technical assurance during design, construction and handover. Close liaison with the design supply chain to ensure the delivery of these interfaces and deliverables associated with the managed disciplines (RAM, System Safety, Interoperability, Electrical Engineering (EMC and E&B and Security as per the programme and budgetary constraints, and in accordance with the client s requirement. Coordination with the broader interface management team, assurance team, design delivery team (alignment and effective delivery on time and within budgetary constraints) construction and logistic teams. Attend weekly meetings with the broader design, systems safety and construction teams and client in Birmingham / London. Chairing regular railways systems / civils systems integration meetings. Support the client with identifying change, risk and opportunities and constantly striving for efficiencies and cost savings. Support the link and coordination with construction teams for management of design and systems interface-related issues. Provide technical input and support to relevant commercial communications (SNCs, NCRs, CEs, Departures, etc) Key Skills and qualifications Degree in Civil or Mechanical Engineering (or related field) Chartered IMEC, PWA Institute or CEng ICE desirable Experience in major multi-disciplinary rail projects. Experience in high-speed railway projects, design and build projects, and UK projects will be valuable. Demonstrated experience managing design integration, technical interfaces and inter-contractor coordination. Proficient in design coordination, design interface management and assurance documentation in railway projects. Excellent knowledge of railway systems, operating requirements, available equipment and systems. Knowledge of system safety, interoperability and RAM disciplines, processes and legal frameworks and related regulations (CDM, CSM, RIR). Strong communication, leadership and management skills, with a positive and collaborative approach. Enthusiastic team player, able to listen, understand, engage and motivate, and with confidence to make decisions when required. Focus on efficiency and driving delivery. Practical experience of harmonising design and quality requirements with buildability. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a Protected Class ), or any other protected class in accordance with applicable laws.
Mechanical Project Manager in Birmingham. 55/60K + Car Allowance 25 holiday days per annum, plus bank holidays Parking on site Mechanical Project Manager Job Description: Management of projects on site varying from £1k to £2m. Be the person on point for all activities relating to the delivery of the project. Coordinate the delivery of all project activities on site between different trade subcontractors and internal teams. Work with the Contracts Manager to ensure the successfully turning of the project plan and quote into a reality. Manage all stakeholders and work with the Site Managers to create the project programme. Placing of all subcontractor orders based upon take-offs. Working with the design and construction teams to coordinate all activities on site. Coordination of Mechanical services (RCP s etc) with other building elements and create solutions to service clashes, etc on site. Provide technical support to the Mechanical trade packages on-site to ensure smooth delivery of the project. Attend and represent the division at all site progress meetings, producing progress reports as required. Production and compilation of all Mechanical project-specific H&S documentation. Manage variations with on-site stakeholders and communicate these back to Contract Managers. Work with the Contracts Manager to produce valuations of works completed and Final Accounts. Production and compilation of Project O&M information Tasks & Duties Build and lead a construction team Take on design development and changes during construction Manage Construction drawing reviews and submissions Manage and review internal & subcontractor H&S information Review and manage programme Monitor project progress and set deadlines Attend project progress meetings Evaluate and manage engineering and installation performance and standards Manage and monitor procurement during construction with CM Manage and monitor valuations during construction with CM Manage commissioning programme Manage and drive snagging work Collate and issue O&M information Essential that communication, both verbal and written, is of a high standard. Candidate Description: Works well to get the best out of people, both those directly and indirectly Has at least 5 years experience of working in a trade background, looking to take the next step in their career Someone who is highly organised, has meticulous attention to detail and is passionate about getting things done on time. If you are interested in this role, please send your most recent CV.
16/01/2026
Full time
Mechanical Project Manager in Birmingham. 55/60K + Car Allowance 25 holiday days per annum, plus bank holidays Parking on site Mechanical Project Manager Job Description: Management of projects on site varying from £1k to £2m. Be the person on point for all activities relating to the delivery of the project. Coordinate the delivery of all project activities on site between different trade subcontractors and internal teams. Work with the Contracts Manager to ensure the successfully turning of the project plan and quote into a reality. Manage all stakeholders and work with the Site Managers to create the project programme. Placing of all subcontractor orders based upon take-offs. Working with the design and construction teams to coordinate all activities on site. Coordination of Mechanical services (RCP s etc) with other building elements and create solutions to service clashes, etc on site. Provide technical support to the Mechanical trade packages on-site to ensure smooth delivery of the project. Attend and represent the division at all site progress meetings, producing progress reports as required. Production and compilation of all Mechanical project-specific H&S documentation. Manage variations with on-site stakeholders and communicate these back to Contract Managers. Work with the Contracts Manager to produce valuations of works completed and Final Accounts. Production and compilation of Project O&M information Tasks & Duties Build and lead a construction team Take on design development and changes during construction Manage Construction drawing reviews and submissions Manage and review internal & subcontractor H&S information Review and manage programme Monitor project progress and set deadlines Attend project progress meetings Evaluate and manage engineering and installation performance and standards Manage and monitor procurement during construction with CM Manage and monitor valuations during construction with CM Manage commissioning programme Manage and drive snagging work Collate and issue O&M information Essential that communication, both verbal and written, is of a high standard. Candidate Description: Works well to get the best out of people, both those directly and indirectly Has at least 5 years experience of working in a trade background, looking to take the next step in their career Someone who is highly organised, has meticulous attention to detail and is passionate about getting things done on time. If you are interested in this role, please send your most recent CV.
Harvey Group have been delivering M&E services for over 47 years. We enjoy a reputation for delivering our projects on time, on budget, safely and to a first class finish. Our considerable experience spans the commercial and industrial, health, education, leisure and residential sectors - throughout Northern Ireland, the Republic of Ireland, and the UK. Due to our continued growth and expansion, we have a fantastic opportunity for you to join our organisation in the role of Mechanical Supervisor / Site Manager. While the majority of our projects are in NI, the candidate should be willing to travel to projects in ROI and GB. Key responsibilities and duties of this role Ensuring projects are delivered on time and within budget Procurement of general day-to-day materials Responsible for the control of labour and their coordination with other trades on-site Ensure all installations are of the highest quality Ensuring the installation complies with the latest relevant regulations Meeting with clients, main contractors, and subcontractors regularly Procurement and management of hire equipment on-site Preparation of short-term lookahead programmes and inputting into the overall master programme Provide regular reports on progress and performance to the Contracts Manager Carry out site based Health, Safety and Quality inspections Skills and qualifications Applicant must have a plumbing/heating trade background Applicants must have a clean driving license Must have demonstrable Health and safety knowledge PC literate with competency in Microsoft Word, Excel, and Outlook Must show care and attention to detail in all areas of installation Organised and disciplined in your planning and approach to work Ability to multitask and work under pressure Self-motivated with a 'can-do' approach to work and willingness to learn and assist Excellent communication skills Work well and confidently as part of a team in a busy environment What you'll get in return You will receive first class support, which reflects our commitment to our greatest asset - our workforce - along with a culture of continual development, training and excellence. You will be offered a competitive starting salary, private healthcare (with service), death in service insurance, and enhanced company sick pay (dependent on length of service). The role is a permanent site based role; location will vary.
16/01/2026
Full time
Harvey Group have been delivering M&E services for over 47 years. We enjoy a reputation for delivering our projects on time, on budget, safely and to a first class finish. Our considerable experience spans the commercial and industrial, health, education, leisure and residential sectors - throughout Northern Ireland, the Republic of Ireland, and the UK. Due to our continued growth and expansion, we have a fantastic opportunity for you to join our organisation in the role of Mechanical Supervisor / Site Manager. While the majority of our projects are in NI, the candidate should be willing to travel to projects in ROI and GB. Key responsibilities and duties of this role Ensuring projects are delivered on time and within budget Procurement of general day-to-day materials Responsible for the control of labour and their coordination with other trades on-site Ensure all installations are of the highest quality Ensuring the installation complies with the latest relevant regulations Meeting with clients, main contractors, and subcontractors regularly Procurement and management of hire equipment on-site Preparation of short-term lookahead programmes and inputting into the overall master programme Provide regular reports on progress and performance to the Contracts Manager Carry out site based Health, Safety and Quality inspections Skills and qualifications Applicant must have a plumbing/heating trade background Applicants must have a clean driving license Must have demonstrable Health and safety knowledge PC literate with competency in Microsoft Word, Excel, and Outlook Must show care and attention to detail in all areas of installation Organised and disciplined in your planning and approach to work Ability to multitask and work under pressure Self-motivated with a 'can-do' approach to work and willingness to learn and assist Excellent communication skills Work well and confidently as part of a team in a busy environment What you'll get in return You will receive first class support, which reflects our commitment to our greatest asset - our workforce - along with a culture of continual development, training and excellence. You will be offered a competitive starting salary, private healthcare (with service), death in service insurance, and enhanced company sick pay (dependent on length of service). The role is a permanent site based role; location will vary.
About The Role Join CCS & Help Shape the Future of Renewable Energy! Job Purpose Provides site management, reporting, resident liaison, client reporting and liaison for energy efficiency improvement and retrofit projects across the UK. Managing all operatives on site, CDM and site setup, all sub-contractors and specialist providers in occupied and void properties. Key Duties Managing work programs for retrofit social housing, energy efficiency projects with a whole house improvement approach. Creates and revises systems and procedures by analysing operating practices, implementing changes to workload and equipment delivery schedules to provide cost savings. Reporting progress against the program, problem solving, scheduling and liaising with contracts manager and resident liaison to ensure smooth end to end customer experience. Resolves technical problems by coordinating preparation of reports and communication with staff, analysing data, and identifying solutions, and then costing for variations. Ensure quality of all operational staff by way of auditing regularly on site to prove competence and compliance of onsite engineers with the company procedures. Provides information by answering questions and requests to clients. Maintains supplies inventory by checking stock to determine orders for delivery to site; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies. Manage all site inductions, H&S practices and accommodate and assist with external audits and clients H&S Auditing on site. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Creates and carries out take offs and application/valuations weekly to report to contract manager. Responsible for all staff in the department, disciplinary procedure, toolbox talks and briefings, review of departmental targets. Monitoring and ensuring on authorized changes to design are allowed for on site activities. Captures and manages variation works required and reports into project team on requirements and to seek authorization to proceed. Liaison with scheduling teams (office based) staff with regard to schedules and programming. Complete QC checks and all required sign off documentation, certification for projects. All surveying and post inspection of works. Defect management in line with KPI's and managing both defective installs and defective evidence to ensure compliance with PAS2035:2023. Skills / Qualifications SMSTS or SSSTS working towards SMSTS Understanding of Electrical, Mechanical or Fabric installations. Experience Required Experience of working within the Social Housing sector on large scale installation and maintenance contracts, customer service, including experience of site CDM and H&S regulations and reporting. Technical Auditing experience. Energy Efficiency & Retrofitting experience preferred. Electrical or Building Fabric Insulation experience preferred. Personal Attributes You value honesty and share knowledge for the greater good. You are committed to continuous improvement and teamwork. You take responsibility for your work and encourage ownership in others. You are goal-oriented, striving for both small and large successes. You are flexible and eager to develop your skills. About Us What We Offer Pension Scheme: Auto-enrolment after probation. Flexible Annual Leave: Option to buy or sell leave after probation. Professional Development: Access to in-house and external training. Employee Assistance Programme: 24/7 support. Refer a Friend Bonus: Reward scheme for successful referrals. Parking: Available at office locations. Why Choose CCS? Skill Development: Access to training programmes, coaching, and mentoring. Career Growth: Clear pathways for personal and professional advancement. Long-Term Contracts: Enjoy stability and job security. We are an equal opportunities employer, and we welcome applicants no matter what their ethnicity, gender, sexuality, beliefs, or nationality.
16/01/2026
Full time
About The Role Join CCS & Help Shape the Future of Renewable Energy! Job Purpose Provides site management, reporting, resident liaison, client reporting and liaison for energy efficiency improvement and retrofit projects across the UK. Managing all operatives on site, CDM and site setup, all sub-contractors and specialist providers in occupied and void properties. Key Duties Managing work programs for retrofit social housing, energy efficiency projects with a whole house improvement approach. Creates and revises systems and procedures by analysing operating practices, implementing changes to workload and equipment delivery schedules to provide cost savings. Reporting progress against the program, problem solving, scheduling and liaising with contracts manager and resident liaison to ensure smooth end to end customer experience. Resolves technical problems by coordinating preparation of reports and communication with staff, analysing data, and identifying solutions, and then costing for variations. Ensure quality of all operational staff by way of auditing regularly on site to prove competence and compliance of onsite engineers with the company procedures. Provides information by answering questions and requests to clients. Maintains supplies inventory by checking stock to determine orders for delivery to site; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies. Manage all site inductions, H&S practices and accommodate and assist with external audits and clients H&S Auditing on site. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Creates and carries out take offs and application/valuations weekly to report to contract manager. Responsible for all staff in the department, disciplinary procedure, toolbox talks and briefings, review of departmental targets. Monitoring and ensuring on authorized changes to design are allowed for on site activities. Captures and manages variation works required and reports into project team on requirements and to seek authorization to proceed. Liaison with scheduling teams (office based) staff with regard to schedules and programming. Complete QC checks and all required sign off documentation, certification for projects. All surveying and post inspection of works. Defect management in line with KPI's and managing both defective installs and defective evidence to ensure compliance with PAS2035:2023. Skills / Qualifications SMSTS or SSSTS working towards SMSTS Understanding of Electrical, Mechanical or Fabric installations. Experience Required Experience of working within the Social Housing sector on large scale installation and maintenance contracts, customer service, including experience of site CDM and H&S regulations and reporting. Technical Auditing experience. Energy Efficiency & Retrofitting experience preferred. Electrical or Building Fabric Insulation experience preferred. Personal Attributes You value honesty and share knowledge for the greater good. You are committed to continuous improvement and teamwork. You take responsibility for your work and encourage ownership in others. You are goal-oriented, striving for both small and large successes. You are flexible and eager to develop your skills. About Us What We Offer Pension Scheme: Auto-enrolment after probation. Flexible Annual Leave: Option to buy or sell leave after probation. Professional Development: Access to in-house and external training. Employee Assistance Programme: 24/7 support. Refer a Friend Bonus: Reward scheme for successful referrals. Parking: Available at office locations. Why Choose CCS? Skill Development: Access to training programmes, coaching, and mentoring. Career Growth: Clear pathways for personal and professional advancement. Long-Term Contracts: Enjoy stability and job security. We are an equal opportunities employer, and we welcome applicants no matter what their ethnicity, gender, sexuality, beliefs, or nationality.
We are recruiting for an experienced Contractor-Side NEC4 Project Manager to support the delivery of a major, long-term civil engineering and infrastructure scheme in Leeds. The project, which focusses on the remediation of a wetland is a large, complex, multi-disciplinary infrastructure programme involving significant earthworks, drainage, structural concrete and environmental works, delivered under NEC4 . The works extend into autumn and winter delivery periods , making programme certainty, sequencing and interface management critical to success. The scheme has a target completion date of September 2027 , with an early completion incentive in place. As such, this role is heavily programme-led and coordination-focused , rather than traditional site management. The Role This position acts as the Contractor-Side Project Manager under NEC4 , with a strong focus on governance, control and assurance within a live contract environment. You will work closely with planning and commercial teams to manage programme risk, contractual obligations, and complex interfaces across multiple contractors and disciplines. This is not a Site Manager role it is a senior project control and coordination role within a structured NEC4 delivery environment. Key Responsibilities Act as Contractor-Side Project Manager under NEC4 Manage Early Warnings , Risk Reduction Meetings , and live risk registers Support the assessment and management of Compensation Events (time and cost) Work closely with the Planner to: Review sequencing and re-sequencing options Test acceleration strategies and additional resource scenarios Understand productivity constraints and opportunities for parallel working Coordinate interfaces between: Tier 1 contractor teams Mechanical & Electrical contractors Designers and other key stakeholders Identify opportunities for early area release to reduce back-end programme risk Provide clear, evidence-based input on what is feasible vs not feasible Support short-term lookahead planning and medium-term programme confidence reviews Scope of Works (High-Level) Earthworks (cut & fill) Foul and storm drainage Cast-in-situ concrete structures Retaining walls (including MSE systems) Haul roads, footpaths and ducting Headwalls and associated civils Concrete crushing and re-use Silt mitigation and surface water management Essential Experience Proven experience as a Project Manager on NEC4 contracts (contractor side) Strong understanding of programme logic and critical path Experience working closely with planners and commercial teams Ability to manage multiple contractor and discipline interfaces Comfortable operating in time-pressured, constrained delivery environments Desirable Experience Background in civils, earthworks, drainage, flood defence or infrastructure Experience on large Tier 1-led projects Experience managing seasonal productivity risk , winter working, or acceleration strategies
16/01/2026
Contract
We are recruiting for an experienced Contractor-Side NEC4 Project Manager to support the delivery of a major, long-term civil engineering and infrastructure scheme in Leeds. The project, which focusses on the remediation of a wetland is a large, complex, multi-disciplinary infrastructure programme involving significant earthworks, drainage, structural concrete and environmental works, delivered under NEC4 . The works extend into autumn and winter delivery periods , making programme certainty, sequencing and interface management critical to success. The scheme has a target completion date of September 2027 , with an early completion incentive in place. As such, this role is heavily programme-led and coordination-focused , rather than traditional site management. The Role This position acts as the Contractor-Side Project Manager under NEC4 , with a strong focus on governance, control and assurance within a live contract environment. You will work closely with planning and commercial teams to manage programme risk, contractual obligations, and complex interfaces across multiple contractors and disciplines. This is not a Site Manager role it is a senior project control and coordination role within a structured NEC4 delivery environment. Key Responsibilities Act as Contractor-Side Project Manager under NEC4 Manage Early Warnings , Risk Reduction Meetings , and live risk registers Support the assessment and management of Compensation Events (time and cost) Work closely with the Planner to: Review sequencing and re-sequencing options Test acceleration strategies and additional resource scenarios Understand productivity constraints and opportunities for parallel working Coordinate interfaces between: Tier 1 contractor teams Mechanical & Electrical contractors Designers and other key stakeholders Identify opportunities for early area release to reduce back-end programme risk Provide clear, evidence-based input on what is feasible vs not feasible Support short-term lookahead planning and medium-term programme confidence reviews Scope of Works (High-Level) Earthworks (cut & fill) Foul and storm drainage Cast-in-situ concrete structures Retaining walls (including MSE systems) Haul roads, footpaths and ducting Headwalls and associated civils Concrete crushing and re-use Silt mitigation and surface water management Essential Experience Proven experience as a Project Manager on NEC4 contracts (contractor side) Strong understanding of programme logic and critical path Experience working closely with planners and commercial teams Ability to manage multiple contractor and discipline interfaces Comfortable operating in time-pressured, constrained delivery environments Desirable Experience Background in civils, earthworks, drainage, flood defence or infrastructure Experience on large Tier 1-led projects Experience managing seasonal productivity risk , winter working, or acceleration strategies
1st Step Solutions Ltd (Mechanical & Electrical Recruitment Specialists) are recruiting for Electricians in Oxford (OX4) Required: Electricians Location: Oxford (OX4) Start Date: Monday 9th February 2026 Duration: 2 months Hours: 50hrs p/wk (Mon-Fri) Rate: 260 per day Duties: Commercial install Requirements: CSCS/JIB card Apply Now via this advert or call our Bristol team on (phone number removed). Who are 1st Step Solutions Ltd? Established in 2004, we are a market leader in M&E/Building Services recruitment within the UK construction industry. With over two decades of expertise, we specialise in the supply of both freelance and permanent professionals across all levels of the Built Environment - from Electricians and Plumbers to Supervisors, Project Managers, Quantity Surveyors, and Contracts Managers. Whether you're looking for your next role or seeking skilled labour & staff to support your project, we deliver tailored recruitment solutions to meet your needs. Compliant Integrity Service Professional Expertise If you do not hear from us within 10 days, then unfortunately your application has not been successful on this occasion. However, we may keep your details on file for any future suitable vacancies and contact you accordingly. You can now follow us and pick up all the latest work opportunities on Facebook (search 1st Step Solutions) on your Facebook.
16/01/2026
Seasonal
1st Step Solutions Ltd (Mechanical & Electrical Recruitment Specialists) are recruiting for Electricians in Oxford (OX4) Required: Electricians Location: Oxford (OX4) Start Date: Monday 9th February 2026 Duration: 2 months Hours: 50hrs p/wk (Mon-Fri) Rate: 260 per day Duties: Commercial install Requirements: CSCS/JIB card Apply Now via this advert or call our Bristol team on (phone number removed). Who are 1st Step Solutions Ltd? Established in 2004, we are a market leader in M&E/Building Services recruitment within the UK construction industry. With over two decades of expertise, we specialise in the supply of both freelance and permanent professionals across all levels of the Built Environment - from Electricians and Plumbers to Supervisors, Project Managers, Quantity Surveyors, and Contracts Managers. Whether you're looking for your next role or seeking skilled labour & staff to support your project, we deliver tailored recruitment solutions to meet your needs. Compliant Integrity Service Professional Expertise If you do not hear from us within 10 days, then unfortunately your application has not been successful on this occasion. However, we may keep your details on file for any future suitable vacancies and contact you accordingly. You can now follow us and pick up all the latest work opportunities on Facebook (search 1st Step Solutions) on your Facebook.
GBR Recruitment Ltd are delighted to be working exclusively with a highly progressive MEP / M&E Building Services company who are looking for an experienced Plumbing & Heating Manager to join their growing business in Lincolnshire . Residential & Commercial Heating & Plumbing experience is required, as well as ideally a Gas Safe qualification. This is a key hands-on management role, overseeing day-to-day operations, daily management / leadership of Plumbing & Heating Engineers, ensuring customer work orders are being fulfilled OTIF & to the quality required, maintaining high standards of workmanship & a high end service. Key Responsibilities: Manage & support a team of plumbing & heating engineers Oversee domestic & commercial projects Job scheduling, quality control, as well as customer liaison Ensure compliance with Gas Safe, plus H&S regulations Ordering materials & associated managing costs Applicants Requirements: Strong background in plumbing & heating, ideally on the tools experience (time served) Previous management or supervisory experience within plumbing & heating services Gas Safe qualification (preferred) Excellent organisational, planning, scheduling & communication skills Full UK driving licence as you will be travelling to customer sites around the county. Employee Benefits: Competitive salary (depending on experience) Company vehicle / fuel allowance (twin cab or other) Bonus & performance scheme Uniform & PPE Company Phone & PDA 28 days holiday per annum Stable, long-term role Friendly & professional working environment 8 hour shifts (generally) Great position, commutable from Lincoln, Boston, Spalding, North Kesteven, South Kesteven, Grantham, Newark, Gainsborough. East Lindsey, West Lindsey, South Holland & North Lincolnshire areas. This role could suit someone working as a HVAC Manager (Heating, Ventilation, and Air Conditioning), Heating Contracts Manager, M&E Building Services Manager, Technical Services Manager, Mechanical Engineering Manager, MEP Engineering Manager, M&E Engineering Manager, Engineering Manager (HVAC & Building Services), Plumbing & Heating Manager, Domestic Heating Manager/Supervisor, Engineering Project Manager, Heating Services Manager, Engineering Supervisor, Heating Supervisor, Gas Installation Manager, Senior Gas Engineering or Senior Heating Engineer or similar
16/01/2026
Full time
GBR Recruitment Ltd are delighted to be working exclusively with a highly progressive MEP / M&E Building Services company who are looking for an experienced Plumbing & Heating Manager to join their growing business in Lincolnshire . Residential & Commercial Heating & Plumbing experience is required, as well as ideally a Gas Safe qualification. This is a key hands-on management role, overseeing day-to-day operations, daily management / leadership of Plumbing & Heating Engineers, ensuring customer work orders are being fulfilled OTIF & to the quality required, maintaining high standards of workmanship & a high end service. Key Responsibilities: Manage & support a team of plumbing & heating engineers Oversee domestic & commercial projects Job scheduling, quality control, as well as customer liaison Ensure compliance with Gas Safe, plus H&S regulations Ordering materials & associated managing costs Applicants Requirements: Strong background in plumbing & heating, ideally on the tools experience (time served) Previous management or supervisory experience within plumbing & heating services Gas Safe qualification (preferred) Excellent organisational, planning, scheduling & communication skills Full UK driving licence as you will be travelling to customer sites around the county. Employee Benefits: Competitive salary (depending on experience) Company vehicle / fuel allowance (twin cab or other) Bonus & performance scheme Uniform & PPE Company Phone & PDA 28 days holiday per annum Stable, long-term role Friendly & professional working environment 8 hour shifts (generally) Great position, commutable from Lincoln, Boston, Spalding, North Kesteven, South Kesteven, Grantham, Newark, Gainsborough. East Lindsey, West Lindsey, South Holland & North Lincolnshire areas. This role could suit someone working as a HVAC Manager (Heating, Ventilation, and Air Conditioning), Heating Contracts Manager, M&E Building Services Manager, Technical Services Manager, Mechanical Engineering Manager, MEP Engineering Manager, M&E Engineering Manager, Engineering Manager (HVAC & Building Services), Plumbing & Heating Manager, Domestic Heating Manager/Supervisor, Engineering Project Manager, Heating Services Manager, Engineering Supervisor, Heating Supervisor, Gas Installation Manager, Senior Gas Engineering or Senior Heating Engineer or similar
Job Title: LEV Engineer Location: Rochdale, Greater Manchester Salary/Benefits: 27k - 48k + Training & Benefits Due to recently winning new contracts in the North West region, our client is seeking a hardworking LEV Engineer to join their growing team. Our client is a privately-owned company, who have immediate growth plans, so there are excellent further development opportunities. It would be beneficial for applicants to have a strong mechanical background and experience. You will be completing testing and inspections of various LEV and extraction systems, within commercial, manufacturing and industrial premises. The successful candidate can expect competitive salaries and benefits packages. You will be travelling across: Rochdale, Oldham, Bolton, Manchester, Stockport, Warrington, Altrincham, St Helens, Runcorn, Widnes, Liverpool, Birkenhead, Ellesmere Port, Chester, Skelmersdale, Formby, Southport, Preston, Blackburn, Chorley, Macclesfield, Northwich, Knutsford, Colne, Burnley, Huddersfield, Halifax, Leeds, Bradford. Experience / Qualifications: Proven experience working as an LEV Engineer, within a Dust / Fume extraction outfit It is essential to hold the BOHS P601 as a minimum It would be advantageous to hold: BOHS P602, P603 and / or P604 Strong working knowledge of HSG 258 and COSHH guidelines Able to adapt to changing travel requirements Good literacy, numeracy and IT skills Able to manage own workload The Role: Inspecting and thoroughly testing LEV, dust and fume extraction systems Identifying any technical issues and making recommendations for works Carrying out remedial duties, including: fan, filter and belt replacements Testing on fume cupboards Air quality testing Completing COSHH assessments Producing thorough technical reports Working to agreed deadlines and project scope Representing the company in a professional manner Alternative Job titles: LEV Testing Engineer, LEV Service Engineer, Dust / Fume Technician, Ventilation Engineer, Fume Cupboard Engineer. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026
16/01/2026
Full time
Job Title: LEV Engineer Location: Rochdale, Greater Manchester Salary/Benefits: 27k - 48k + Training & Benefits Due to recently winning new contracts in the North West region, our client is seeking a hardworking LEV Engineer to join their growing team. Our client is a privately-owned company, who have immediate growth plans, so there are excellent further development opportunities. It would be beneficial for applicants to have a strong mechanical background and experience. You will be completing testing and inspections of various LEV and extraction systems, within commercial, manufacturing and industrial premises. The successful candidate can expect competitive salaries and benefits packages. You will be travelling across: Rochdale, Oldham, Bolton, Manchester, Stockport, Warrington, Altrincham, St Helens, Runcorn, Widnes, Liverpool, Birkenhead, Ellesmere Port, Chester, Skelmersdale, Formby, Southport, Preston, Blackburn, Chorley, Macclesfield, Northwich, Knutsford, Colne, Burnley, Huddersfield, Halifax, Leeds, Bradford. Experience / Qualifications: Proven experience working as an LEV Engineer, within a Dust / Fume extraction outfit It is essential to hold the BOHS P601 as a minimum It would be advantageous to hold: BOHS P602, P603 and / or P604 Strong working knowledge of HSG 258 and COSHH guidelines Able to adapt to changing travel requirements Good literacy, numeracy and IT skills Able to manage own workload The Role: Inspecting and thoroughly testing LEV, dust and fume extraction systems Identifying any technical issues and making recommendations for works Carrying out remedial duties, including: fan, filter and belt replacements Testing on fume cupboards Air quality testing Completing COSHH assessments Producing thorough technical reports Working to agreed deadlines and project scope Representing the company in a professional manner Alternative Job titles: LEV Testing Engineer, LEV Service Engineer, Dust / Fume Technician, Ventilation Engineer, Fume Cupboard Engineer. Future Select are recruiting in the Compliance / Environmental industry, including: LEV / Critical Air / Clean Air / Air Hygiene / Fire Safety; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. Future Select Copyright 2026
