Our client a national renewable engergy provider are seeking a lead air source heat pump installer and also a service/maintenance engineer to work on domestic properties covering the Gloucestershire area, Heating Engineer/ Air source heat pump installer The company have been trading for over 15 years and are well established in the renewable energy field. The role will include installing: Air source heat pumps Hot Water cylinders Radiators Ideally you will have experience of general plumbing and heating work. If you also have any previous experience with installing or servicing air source heat pumps, that would be an advantage. A full UK driving licence is required, as you be travelling in a company vehicle. Qualifications NVQ/ C+G Plumbing & Heating Level 3 Heat Pump Installation (Advantageous) Gas Safe Registered (not essential) Benefits Competitive pay and great on target earnings Company pension scheme Health insurance Full time and part time/ sub contract options available
May 18, 2024
Full time
Our client a national renewable engergy provider are seeking a lead air source heat pump installer and also a service/maintenance engineer to work on domestic properties covering the Gloucestershire area, Heating Engineer/ Air source heat pump installer The company have been trading for over 15 years and are well established in the renewable energy field. The role will include installing: Air source heat pumps Hot Water cylinders Radiators Ideally you will have experience of general plumbing and heating work. If you also have any previous experience with installing or servicing air source heat pumps, that would be an advantage. A full UK driving licence is required, as you be travelling in a company vehicle. Qualifications NVQ/ C+G Plumbing & Heating Level 3 Heat Pump Installation (Advantageous) Gas Safe Registered (not essential) Benefits Competitive pay and great on target earnings Company pension scheme Health insurance Full time and part time/ sub contract options available
Exciting Opportunity to join our Growing Team: Inspection and Install Gas Engineer We are a multi-trade maintenance family run company carrying out reactive and planned maintenance inside and outside the M25 area. Key Skills: Must be Gas Safe Registered & hold Level 2/3 Diploma in Plumbing and Heating Able to issue Gas Safe Certificates for Domestic Properties using Software provided Able to complete servicing, Landlords Gas Safety Inspections and breakdowns and boiler installation if required. Must be registered to work on gas boilers, hobs, cookers and fires Minimum of 5 years experience Plumbing Previous experience on HIU Units and Under Floor Heating preferred Good Time Management Organisation Skills and Job Planning Able to work under own initiative and as part of a team People skills Health and Safety awareness Ability to be able to use provided reporting software for accurate job details and information. (Full training will be given) Benefits Competitive basic salary with extra income available through overtime and out of hours payments. Pension scheme 21 days holiday + Bank Holidays Company vehicle & fuel card Uniform PPE Salary Range £49,000 - £60,000 (Dependant Upon Experience) Overtime available Monday -Friday Please note: We are an equal opportunities employer and abide by the Equalities Act 2010. All applicants are treated equally and fairly throughout the recruitment and selection process. We will take every possible step to ensure that no person working at, seeking employment with us or any member of our team of associates will receive less favourable treatment or will be disadvantaged by requirements or conditions that cannot be shown to be justifiable on the grounds of their: Age, Disability, Gender Reassignment, Marriage and Civil Partnership, Pregnancy and Maternity, Race, Religion or belief, Sex, Sexual Orientation Job Type: Full-time Pay: £49,000.00-£60,000.00 per year Benefits: Company car Free parking Schedule: Monday to Friday Experience: Domestic Gas Engineer: 5 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road Expected start date: 31/05/2024
May 17, 2024
Full time
Exciting Opportunity to join our Growing Team: Inspection and Install Gas Engineer We are a multi-trade maintenance family run company carrying out reactive and planned maintenance inside and outside the M25 area. Key Skills: Must be Gas Safe Registered & hold Level 2/3 Diploma in Plumbing and Heating Able to issue Gas Safe Certificates for Domestic Properties using Software provided Able to complete servicing, Landlords Gas Safety Inspections and breakdowns and boiler installation if required. Must be registered to work on gas boilers, hobs, cookers and fires Minimum of 5 years experience Plumbing Previous experience on HIU Units and Under Floor Heating preferred Good Time Management Organisation Skills and Job Planning Able to work under own initiative and as part of a team People skills Health and Safety awareness Ability to be able to use provided reporting software for accurate job details and information. (Full training will be given) Benefits Competitive basic salary with extra income available through overtime and out of hours payments. Pension scheme 21 days holiday + Bank Holidays Company vehicle & fuel card Uniform PPE Salary Range £49,000 - £60,000 (Dependant Upon Experience) Overtime available Monday -Friday Please note: We are an equal opportunities employer and abide by the Equalities Act 2010. All applicants are treated equally and fairly throughout the recruitment and selection process. We will take every possible step to ensure that no person working at, seeking employment with us or any member of our team of associates will receive less favourable treatment or will be disadvantaged by requirements or conditions that cannot be shown to be justifiable on the grounds of their: Age, Disability, Gender Reassignment, Marriage and Civil Partnership, Pregnancy and Maternity, Race, Religion or belief, Sex, Sexual Orientation Job Type: Full-time Pay: £49,000.00-£60,000.00 per year Benefits: Company car Free parking Schedule: Monday to Friday Experience: Domestic Gas Engineer: 5 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road Expected start date: 31/05/2024
We have an exciting opportunity for an experienced Mechanical Estimator to join our client in the Newark area. Working hours: Monday to Thursday 08:00 a.m. to 17:00 p.m and Friday 8:00 a.m. to 16.30 p.m. Salary: 35,000 + and is to be discussed at interview and is dependent on experience. Our client has a fantastic reputation within their industry with a range of projects from small to multimillion within a variety of sectors ranging from education, recreational and public. You will be joining a close-knit team whose number one priority is providing 1st class service to their clients with further opportunity of development and a long-standing career. Duties may include but are not limited to: reviewing project specifications, and other documents to understand project requirements. analysing mechanical systems and components to accurately estimate labour, materials and equipment costs. liaising with engineers, projects managers, and clients to clarify project scope and objectives. generating detailed cost estimates and proposals for mechanical installations. obtaining competitive pricing from suppliers and subcontractors for materials and services. attending site visits and inspections to assess project conditions and requirements. identifying potential risks, challenges, and opportunities for cost saving during the estimating process. maintaining accurate records of project estimates and associated information. communicating effectively with stakeholders to present and discuss project estimates and proposals. providing support to project teams during the bidding, planning and construction phases of projects. The ideal candidate will have: Proven experience as an mechanical estimator within the construction industry with the ability to accurately estimate project costs, including labour, materials, and equipment and health & safety knowledge would be beneficial. Full UK driving licence. Awareness of CIBSE codes, BSRIA guides, and building services (air conditioning, ventilation, heating, and plumbing) best practices; awareness of CIBSE codes, BSRIA guides & Building Services (air conditioning/ventilation/heating/plumbing) best, practice guides. Working knowledge of SEC cypher estimating package or similar. Working knowledge of AutoCAD. If you feel that you have the skills and you believe this is an opportunity for you, please contact Kody Shaw. Reflect Recruitment Group is operating as employment agency under the Employment Agencies Act 1973
May 16, 2024
Full time
We have an exciting opportunity for an experienced Mechanical Estimator to join our client in the Newark area. Working hours: Monday to Thursday 08:00 a.m. to 17:00 p.m and Friday 8:00 a.m. to 16.30 p.m. Salary: 35,000 + and is to be discussed at interview and is dependent on experience. Our client has a fantastic reputation within their industry with a range of projects from small to multimillion within a variety of sectors ranging from education, recreational and public. You will be joining a close-knit team whose number one priority is providing 1st class service to their clients with further opportunity of development and a long-standing career. Duties may include but are not limited to: reviewing project specifications, and other documents to understand project requirements. analysing mechanical systems and components to accurately estimate labour, materials and equipment costs. liaising with engineers, projects managers, and clients to clarify project scope and objectives. generating detailed cost estimates and proposals for mechanical installations. obtaining competitive pricing from suppliers and subcontractors for materials and services. attending site visits and inspections to assess project conditions and requirements. identifying potential risks, challenges, and opportunities for cost saving during the estimating process. maintaining accurate records of project estimates and associated information. communicating effectively with stakeholders to present and discuss project estimates and proposals. providing support to project teams during the bidding, planning and construction phases of projects. The ideal candidate will have: Proven experience as an mechanical estimator within the construction industry with the ability to accurately estimate project costs, including labour, materials, and equipment and health & safety knowledge would be beneficial. Full UK driving licence. Awareness of CIBSE codes, BSRIA guides, and building services (air conditioning, ventilation, heating, and plumbing) best practices; awareness of CIBSE codes, BSRIA guides & Building Services (air conditioning/ventilation/heating/plumbing) best, practice guides. Working knowledge of SEC cypher estimating package or similar. Working knowledge of AutoCAD. If you feel that you have the skills and you believe this is an opportunity for you, please contact Kody Shaw. Reflect Recruitment Group is operating as employment agency under the Employment Agencies Act 1973
Electrical Design Engineer Electrical Design Engineering - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and install controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
May 13, 2024
Full time
Electrical Design Engineer Electrical Design Engineering - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and install controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Mechanical Design Engineer Mechanical Design Engineer - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or in relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
May 13, 2024
Full time
Mechanical Design Engineer Mechanical Design Engineer - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or in relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Our client specialises in all aspects of Mechanical and Electrical (M&E) engineering, with over 20 years of experience and knowledge of working across a wide range of different sectors including education, healthcare, housing, retail, and leisure. Due to a period of growth, they are looking for Commercial Gas Engineers on a temp to perm basis. The main duties and responsibilities of the Commercial Gas Engineer are: To undertake heating/combustion maintenance reactive repair works as issued within set time frames to ensure client expectations are met. To proactively identify and undertake heating/combustion maintenance works (reactive works not yet identified by the client) To undertake heating/combustion PPM works, within set time frames to ensure statutory compliance. To undertake heating/combustion improvement works as required. Diagnose and repair faults on systems and plant including basic electrical fault finding. To evaluate performance and ensure the proper servicing and maintenance of all plant room equipment. Maintain stock control systems as directed. Maintain the cleanliness of plant rooms, workshops, and storage areas. Carry out on call duties as part of a rota. To ensure that administration requirements are actioned on time and all necessary documents / records are maintained accurately. Commercial and domestic installations Domestic fault finding and servicing. Minor plumbing works To be considered for the position ACS Commercial and Domestic Gas (Domestic Gas qualifications CCN1, CEN1, CPA1) (Commercial Gas qualifications CIGA1, COCN1, CBHP1, ICPN1, TPCP1A) A full driving licence is essential for this role. Significant previous experience in a similar service environment Must be flexible in their approach to work. Desirable: HVAC Control Systems A basic electrical qualification e.g. 17th edition IEE Previous experience of PFI building maintenance Legionella Awareness Knowledge of the pressure system regulations Experience of BMS systems
May 08, 2024
Seasonal
Our client specialises in all aspects of Mechanical and Electrical (M&E) engineering, with over 20 years of experience and knowledge of working across a wide range of different sectors including education, healthcare, housing, retail, and leisure. Due to a period of growth, they are looking for Commercial Gas Engineers on a temp to perm basis. The main duties and responsibilities of the Commercial Gas Engineer are: To undertake heating/combustion maintenance reactive repair works as issued within set time frames to ensure client expectations are met. To proactively identify and undertake heating/combustion maintenance works (reactive works not yet identified by the client) To undertake heating/combustion PPM works, within set time frames to ensure statutory compliance. To undertake heating/combustion improvement works as required. Diagnose and repair faults on systems and plant including basic electrical fault finding. To evaluate performance and ensure the proper servicing and maintenance of all plant room equipment. Maintain stock control systems as directed. Maintain the cleanliness of plant rooms, workshops, and storage areas. Carry out on call duties as part of a rota. To ensure that administration requirements are actioned on time and all necessary documents / records are maintained accurately. Commercial and domestic installations Domestic fault finding and servicing. Minor plumbing works To be considered for the position ACS Commercial and Domestic Gas (Domestic Gas qualifications CCN1, CEN1, CPA1) (Commercial Gas qualifications CIGA1, COCN1, CBHP1, ICPN1, TPCP1A) A full driving licence is essential for this role. Significant previous experience in a similar service environment Must be flexible in their approach to work. Desirable: HVAC Control Systems A basic electrical qualification e.g. 17th edition IEE Previous experience of PFI building maintenance Legionella Awareness Knowledge of the pressure system regulations Experience of BMS systems
Heating and Plumbing Engineer required for rollout of renewable projects in Glasgow area My client are undertaking an exciting Sustainability and Renewables based set of projects in the Glasgow region. A team of experienced and trainee Engineer / Technicians are needed to complete this program. Duties will include: System drain down and cleaning/flushing Radiator and valve replacement HIU (Heat Interface Unit) component replacement System startup and commissioning Mentoring and guiding trainee staff This program is to upgrade traditional heating networks to AI controlled carbon saving technology. The network you install will help save 1,000s tons of carbon annually. You will be working across 20+ sites in the Glasgow region. It is likely you will have a background in: Heating or Plumbing in a residential construction background Guiding and mentoring trainees Full Driving Licence Working collaboratively with different trades HIU experience is not necessary as training will be offered on company systems. Projects will involve close work with Engineers on the telecoms and networking aspect of building fabric and the requirement to be flexible, and for each team to assist the other is paramount If you are interested in this project and have ambition and passion for this technology but not the skills then junior and trainee positions also exist. For more information please contact Andy
May 07, 2024
Full time
Heating and Plumbing Engineer required for rollout of renewable projects in Glasgow area My client are undertaking an exciting Sustainability and Renewables based set of projects in the Glasgow region. A team of experienced and trainee Engineer / Technicians are needed to complete this program. Duties will include: System drain down and cleaning/flushing Radiator and valve replacement HIU (Heat Interface Unit) component replacement System startup and commissioning Mentoring and guiding trainee staff This program is to upgrade traditional heating networks to AI controlled carbon saving technology. The network you install will help save 1,000s tons of carbon annually. You will be working across 20+ sites in the Glasgow region. It is likely you will have a background in: Heating or Plumbing in a residential construction background Guiding and mentoring trainees Full Driving Licence Working collaboratively with different trades HIU experience is not necessary as training will be offered on company systems. Projects will involve close work with Engineers on the telecoms and networking aspect of building fabric and the requirement to be flexible, and for each team to assist the other is paramount If you are interested in this project and have ambition and passion for this technology but not the skills then junior and trainee positions also exist. For more information please contact Andy
Wet Worker / Heating Engineer 32,500 - 35,000pa + Company Van + OTE Permanent East London Any applicants will have a minimum baseline Plumbing NVQ level 2 qualification. Wet Worker/Heating Engineer Duties: Day to day plumbing, Pipework, Radiators, TRVS and assisting the engineers with domestic properties across West London. If you are a Wet Worker/Heating Engineer who have a minimum of 3 years knowledge and experience in the installation, maintenance, repair and removal of heating systems within a multi occupancy dwelling setting with strong general skills and expeirence we would be keen to discuss opportunities. Wet Worker/Heating Engineer Requirements: Must have Plumbing/Heating experience 3 + years Experience in Heating - Radiators, TRV's and Piping NVQ in Plumbing Abestos Awareness Full UK Driving License Workflow Recruitment is an Agency acting on behalf of a leading Contractor. Only successful Wet Worker / Heating Engineers will be contacted.
May 01, 2024
Full time
Wet Worker / Heating Engineer 32,500 - 35,000pa + Company Van + OTE Permanent East London Any applicants will have a minimum baseline Plumbing NVQ level 2 qualification. Wet Worker/Heating Engineer Duties: Day to day plumbing, Pipework, Radiators, TRVS and assisting the engineers with domestic properties across West London. If you are a Wet Worker/Heating Engineer who have a minimum of 3 years knowledge and experience in the installation, maintenance, repair and removal of heating systems within a multi occupancy dwelling setting with strong general skills and expeirence we would be keen to discuss opportunities. Wet Worker/Heating Engineer Requirements: Must have Plumbing/Heating experience 3 + years Experience in Heating - Radiators, TRV's and Piping NVQ in Plumbing Abestos Awareness Full UK Driving License Workflow Recruitment is an Agency acting on behalf of a leading Contractor. Only successful Wet Worker / Heating Engineers will be contacted.
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes/ If this role is of interest, please apply for additional information or contact Thomas Edevane.
May 01, 2024
Contract
ATTENTION! Plumbers/Mechanical Engineers Wanted! Build your experience further with this fantastic opportunity as a Plumber/Mechanical Engineer, installing, servicing and testing various appliances within a specific location. This vacancy is a 3-6 month contract, with a possibility to go permanent. Key Responsibilities for the Plumber/Mechanical Engineer: Complete all statutory and non-statutory maintenance in accordance with set maintenance schedules and contract SLA's. Complete reactive works in line with contract SLA's/ Sound awareness of risk assessment and working safely with equipment. Ability to measure, work to plans, reach technical diagrams and communicate, present and report technical information as appropriate to trade/skill Skills Required for the Plumber/Mechanical Engineer: NVQ Level 3 in plumbing/heating/air conditioning/mechanical engineering (Essential) Sound knowledge of Health & Safety including ISO9001 & 14,001. Experience of working on Commercial Hot & Cold water systems is essential. Approved and formal apprenticeship served in plumbing/mechanical skills area required or relevant and practical experience within a similar industry Experience in the maintenance of: Heating and domestic water services, TMV's, Air handling units, Manage Plant Rooms, including Steam Pipes/ If this role is of interest, please apply for additional information or contact Thomas Edevane.
Are you a Gas Service & Breakdown Engineer bored of travelling over 100 miles a day? Being sent here there and everywhere by your employer? And bored of working the same contracts again and again? Then please, look no further, as we have an opportunity for a Gas Service & Breakdown Engineer working for one of the fastest growing quality heating and plumbing services across South London, Surrey & the south Coast! In which you will be working for a CEO who cares about its employees, with company nights out, private medical and dental care, and market leading competitive salary provided. Gas Service & Breakdown Engineers for this company will be required to travel between BR, SW, DA & SE9, however we are looking for THREE, yes, THREE Gas engineers! So being posted up between two postcodes and delivering your services has never been so stress free. ALL work is Private, as the company in question works with an untold amount of leading insurance companies. Salary depends on the pass rate you have on the exam - Exam will be taken on the 2nd interview, in which depending on pass rate of the exam you will be offered higher or lower dependant on your results in the exam. Salary breakdown(dependant on technical knowledge passed in gas exam): A Band(Top Pass marks) - £43 - £47,500 B Band(Good pass marks) - £39,500 Minimum Employee Benefits: Ford Transit Van customs Iphone - Work phone Full van stock provided Overtime - £30 complete, £20 incomplete, £10 no access(retainer per day Mon-Fri - £20 a day, Saturday £25 a day) Company Nights Out! Uniform Hours are 8am - 5pm, in which you would be expected to be at the plumb centre for 8am or at least on the first job if you don't need to visit the plumb centre by then - Plumb centre is located in SE. Service & Breakdown Must haves: CKR1, HTR1, CCN1, CENWAT 3 years breakdown experience(On your own!). Clean DBS(Dependant on severity). If you think you would be of interest in this or know anyone interested in this, please email me on (url removed) or call on (phone number removed). I look forward to speaking with you soon! :)
May 01, 2024
Full time
Are you a Gas Service & Breakdown Engineer bored of travelling over 100 miles a day? Being sent here there and everywhere by your employer? And bored of working the same contracts again and again? Then please, look no further, as we have an opportunity for a Gas Service & Breakdown Engineer working for one of the fastest growing quality heating and plumbing services across South London, Surrey & the south Coast! In which you will be working for a CEO who cares about its employees, with company nights out, private medical and dental care, and market leading competitive salary provided. Gas Service & Breakdown Engineers for this company will be required to travel between BR, SW, DA & SE9, however we are looking for THREE, yes, THREE Gas engineers! So being posted up between two postcodes and delivering your services has never been so stress free. ALL work is Private, as the company in question works with an untold amount of leading insurance companies. Salary depends on the pass rate you have on the exam - Exam will be taken on the 2nd interview, in which depending on pass rate of the exam you will be offered higher or lower dependant on your results in the exam. Salary breakdown(dependant on technical knowledge passed in gas exam): A Band(Top Pass marks) - £43 - £47,500 B Band(Good pass marks) - £39,500 Minimum Employee Benefits: Ford Transit Van customs Iphone - Work phone Full van stock provided Overtime - £30 complete, £20 incomplete, £10 no access(retainer per day Mon-Fri - £20 a day, Saturday £25 a day) Company Nights Out! Uniform Hours are 8am - 5pm, in which you would be expected to be at the plumb centre for 8am or at least on the first job if you don't need to visit the plumb centre by then - Plumb centre is located in SE. Service & Breakdown Must haves: CKR1, HTR1, CCN1, CENWAT 3 years breakdown experience(On your own!). Clean DBS(Dependant on severity). If you think you would be of interest in this or know anyone interested in this, please email me on (url removed) or call on (phone number removed). I look forward to speaking with you soon! :)
35,000 - 45,000 + Bonus + Van / Van Allowance + Fuel & Expenses + Excellent holiday & benefits package Location: Droitwich, Redditch, Bromsgrove, Worcester, Alvechurch, North Worcestershire, West Midlands The Role: A permanent or long term contractor vacancy exists working for one of the leading plumbing and heating companies in the Worcester / North Worcestershire / West Midlands region. Using your experience as a gas engineer, heating engineer or plumber, you will join the technical team tasked with covering the Worcestershire area at domestic and commercial properties. This varied role will include maintenance, fault-finding, repair and installation works, so ideally we are looking to see qualified Gas Safe heating engineers with varied experience. This is a very key appointment for this renowned company, as they continue to grow and as such require a talented, reliable and motivated heating engineer to join their expanding team. Excellent earnings alongside job stability and personal progression on offer. Apply now! Candidate Requirements: We are looking for qualified and experienced gas safe plumbing and heating engineers living in the North Worcestershire (Redditch, Bromsgrove or Droitwich) or Worcestershire / West Midlands region. You will be well organised, reliable and enjoy taking a "right first time" approach to all things plumbing and heating. We are looking for someone to join for the long term so if you are unhappy in your current role and want all the benefits that come with working for an employee focused plumbing and heating company, apply now for an immediate interview. This can be a permanent contract or a long term contractor agreement so all engineers with the right qualifications and experience and urged to apply.
May 01, 2024
Full time
35,000 - 45,000 + Bonus + Van / Van Allowance + Fuel & Expenses + Excellent holiday & benefits package Location: Droitwich, Redditch, Bromsgrove, Worcester, Alvechurch, North Worcestershire, West Midlands The Role: A permanent or long term contractor vacancy exists working for one of the leading plumbing and heating companies in the Worcester / North Worcestershire / West Midlands region. Using your experience as a gas engineer, heating engineer or plumber, you will join the technical team tasked with covering the Worcestershire area at domestic and commercial properties. This varied role will include maintenance, fault-finding, repair and installation works, so ideally we are looking to see qualified Gas Safe heating engineers with varied experience. This is a very key appointment for this renowned company, as they continue to grow and as such require a talented, reliable and motivated heating engineer to join their expanding team. Excellent earnings alongside job stability and personal progression on offer. Apply now! Candidate Requirements: We are looking for qualified and experienced gas safe plumbing and heating engineers living in the North Worcestershire (Redditch, Bromsgrove or Droitwich) or Worcestershire / West Midlands region. You will be well organised, reliable and enjoy taking a "right first time" approach to all things plumbing and heating. We are looking for someone to join for the long term so if you are unhappy in your current role and want all the benefits that come with working for an employee focused plumbing and heating company, apply now for an immediate interview. This can be a permanent contract or a long term contractor agreement so all engineers with the right qualifications and experience and urged to apply.
Senior Mechanical Engineer required for our client based in Norwich. Our client specialises within the building services and construction industry. The Senior Mechanical Engineer will be within the Building Services department delivering projects in variety in sectors including schools, hospitals and residential developments. The Senior Mechanical Engineer will be joining an established team and be tasked with overseeing projects from their inception to completion and managing the wider team. Day to day tasks will include design specifications and calculations using specialist software such as AutoCAD and REVIT as well as amending and improving existing drawings, control specifications to ensure sound engineering and effective design solutions. The Ideal Senior Mechanical Engineer will be a Chartered member of IMechE or close to completing this. The Senior Mechanical Engineer will have proven experience of producing mechanical services or building services designs from project commencement to completion in line with building regulations, legislation & CIBSE guidelines. Typical projects are new build or refurbishment works on commercial heating systems, ventilation systems, plumbing services and building control systems. Senior Mechanical Building Engineer Position Overview & Experienced Required Asset & Condition Surveying/Reports/Drawings Design Calculations & Reports Proposed & Existing Drawing Packaged Control Specifications Site Witnessing/Validation Experience using, MEP, REVIT, Hevacomp, Cymap or AutoCAD. Senior Mechanical Engineer Position Remuneration Salary 45k - 60k Annual leave Pension Membership fees Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
May 01, 2024
Full time
Senior Mechanical Engineer required for our client based in Norwich. Our client specialises within the building services and construction industry. The Senior Mechanical Engineer will be within the Building Services department delivering projects in variety in sectors including schools, hospitals and residential developments. The Senior Mechanical Engineer will be joining an established team and be tasked with overseeing projects from their inception to completion and managing the wider team. Day to day tasks will include design specifications and calculations using specialist software such as AutoCAD and REVIT as well as amending and improving existing drawings, control specifications to ensure sound engineering and effective design solutions. The Ideal Senior Mechanical Engineer will be a Chartered member of IMechE or close to completing this. The Senior Mechanical Engineer will have proven experience of producing mechanical services or building services designs from project commencement to completion in line with building regulations, legislation & CIBSE guidelines. Typical projects are new build or refurbishment works on commercial heating systems, ventilation systems, plumbing services and building control systems. Senior Mechanical Building Engineer Position Overview & Experienced Required Asset & Condition Surveying/Reports/Drawings Design Calculations & Reports Proposed & Existing Drawing Packaged Control Specifications Site Witnessing/Validation Experience using, MEP, REVIT, Hevacomp, Cymap or AutoCAD. Senior Mechanical Engineer Position Remuneration Salary 45k - 60k Annual leave Pension Membership fees Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Birchley Consultancy Limited
Astwood Bank, Worcestershire
35,000 - 45,000 + Bonus + Van / Van Allowance + Fuel & Expenses + Excellent holiday & benefits package Location: Droitwich, Redditch, Bromsgrove, Worcester, Alvechurch, North Worcestershire, West Midlands The Role: A permanent or long term contractor vacancy exists working for one of the leading plumbing and heating companies in the Worcester / North Worcestershire / West Midlands region. Using your experience as a gas engineer, heating engineer or plumber, you will join the technical team tasked with covering the Worcestershire area at domestic and commercial properties. This varied role will include maintenance, fault-finding, repair and installation works, so ideally we are looking to see qualified Gas Safe heating engineers with varied experience. This is a very key appointment for this renowned company, as they continue to grow and as such require a talented, reliable and motivated heating engineer to join their expanding team. Excellent earnings alongside job stability and personal progression on offer. Apply now! Candidate Requirements: We are looking for qualified and experienced gas safe plumbing and heating engineers living in the North Worcestershire (Redditch, Bromsgrove or Droitwich) or Worcestershire / West Midlands region. You will be well organised, reliable and enjoy taking a "right first time" approach to all things plumbing and heating. We are looking for someone to join for the long term so if you are unhappy in your current role and want all the benefits that come with working for an employee focused plumbing and heating company, apply now for an immediate interview. This can be a permanent contract or a long term contractor agreement so all engineers with the right qualifications and experience and urged to apply.
May 01, 2024
Full time
35,000 - 45,000 + Bonus + Van / Van Allowance + Fuel & Expenses + Excellent holiday & benefits package Location: Droitwich, Redditch, Bromsgrove, Worcester, Alvechurch, North Worcestershire, West Midlands The Role: A permanent or long term contractor vacancy exists working for one of the leading plumbing and heating companies in the Worcester / North Worcestershire / West Midlands region. Using your experience as a gas engineer, heating engineer or plumber, you will join the technical team tasked with covering the Worcestershire area at domestic and commercial properties. This varied role will include maintenance, fault-finding, repair and installation works, so ideally we are looking to see qualified Gas Safe heating engineers with varied experience. This is a very key appointment for this renowned company, as they continue to grow and as such require a talented, reliable and motivated heating engineer to join their expanding team. Excellent earnings alongside job stability and personal progression on offer. Apply now! Candidate Requirements: We are looking for qualified and experienced gas safe plumbing and heating engineers living in the North Worcestershire (Redditch, Bromsgrove or Droitwich) or Worcestershire / West Midlands region. You will be well organised, reliable and enjoy taking a "right first time" approach to all things plumbing and heating. We are looking for someone to join for the long term so if you are unhappy in your current role and want all the benefits that come with working for an employee focused plumbing and heating company, apply now for an immediate interview. This can be a permanent contract or a long term contractor agreement so all engineers with the right qualifications and experience and urged to apply.
Upgrade Your Career With Aira Are you looking for a career, rather than a job? Are you looking for a place where you can take pride in your work, whilst installing the latest technology? That's Aira. Right now, we're looking for experienced domestic heating installers to join our team of Clean Energy Technicians right across the UK, so even if you've never fitted a heat pump before , you may have exactly the skills we're after. If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer You'll be helping families lower their costs and carbon footprint by Installing the very latest Vaillant heat pumps, cylinders, and radiators. You'll work closely with our designers to make sure that you'll only be fitting efficient, reliable systems. All your jobs will have been properly surveyed, and you'll be given schematic diagrams for every installation. You'll train at the Aira Academy to become an elite Heat Pump Engineer, giving you the opportunity for development and professional growth with the UK's fastest growing Heat Pump installer. You'll be Joining a Europe-Wide team of Engineers as part of the Aira family. What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Gas Qualifications Unvented hot water systems (part G) Level 3 heat pump system design F-Gas Category 1 What we offer as a Heat Pump Engineer Base Salary of £45,000 Referral Scheme Branded Company Van Company Phone All tools uniform and equipment provided 25 days Annual Leave + Bank Holidays Health Cash Plan Reward Gateway (shopping discount) Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy Curious about Aira? Here's what our engineers Rich, Rob, and Stephen had to say about working at Aira: At Aira, We re not just champions of next-generation energy, we re champions in Diversity and Inclusion too. We believe that a diverse workforce sparks innovation and creativity and enables us to better serve our customers and communities. We encourage individuals from all backgrounds, cultures, and perspectives to join our team. We will never accept any form of discrimination and believe that together, we can drive a new era for our people and planet.
May 01, 2024
Full time
Upgrade Your Career With Aira Are you looking for a career, rather than a job? Are you looking for a place where you can take pride in your work, whilst installing the latest technology? That's Aira. Right now, we're looking for experienced domestic heating installers to join our team of Clean Energy Technicians right across the UK, so even if you've never fitted a heat pump before , you may have exactly the skills we're after. If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer You'll be helping families lower their costs and carbon footprint by Installing the very latest Vaillant heat pumps, cylinders, and radiators. You'll work closely with our designers to make sure that you'll only be fitting efficient, reliable systems. All your jobs will have been properly surveyed, and you'll be given schematic diagrams for every installation. You'll train at the Aira Academy to become an elite Heat Pump Engineer, giving you the opportunity for development and professional growth with the UK's fastest growing Heat Pump installer. You'll be Joining a Europe-Wide team of Engineers as part of the Aira family. What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Gas Qualifications Unvented hot water systems (part G) Level 3 heat pump system design F-Gas Category 1 What we offer as a Heat Pump Engineer Base Salary of £45,000 Referral Scheme Branded Company Van Company Phone All tools uniform and equipment provided 25 days Annual Leave + Bank Holidays Health Cash Plan Reward Gateway (shopping discount) Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy Curious about Aira? Here's what our engineers Rich, Rob, and Stephen had to say about working at Aira: At Aira, We re not just champions of next-generation energy, we re champions in Diversity and Inclusion too. We believe that a diverse workforce sparks innovation and creativity and enables us to better serve our customers and communities. We encourage individuals from all backgrounds, cultures, and perspectives to join our team. We will never accept any form of discrimination and believe that together, we can drive a new era for our people and planet.
Job Title: Mechanical Project Manager Company Overview: My client is a leading Mechanical & Electrical subcontractor specialising in Education, Industrial, Commercial, and Government Sites projects. With a reputation for excellence and innovation, they deliver high-quality projects on time and within budget. Their team is committed to exceeding client expectations through meticulous planning, efficient execution, and superior project management. Position Overview: They are seeking an experienced Mechanical Project Manager to join their dynamic team. The successful candidate will oversee all aspects of mechanical project management, ensuring the successful delivery of projects from conception to completion. The role requires strong leadership skills, exceptional technical expertise, and the ability to collaborate effectively with internal teams and external stakeholders. The work will include some or the majority of the following systems: power (HV or LV), lighting, data, security systems, life safety systems, disabled systems, heating, cooling, ventilation, BMS, IBT, domestics, etc. Responsibilities: Manage all aspects of mechanical projects, including planning, scheduling, budgeting, and resource allocation. Liaise with clients, architects, engineers, subcontractors, and other stakeholders to ensure project objectives are met. Prepare project proposals, budgets, and schedules, and present them to clients for approval. Monitor project progress, identify potential risks or obstacles, and implement effective mitigation strategies. Conduct regular site inspections to ensure compliance with project specifications, safety regulations, and quality standards. Oversee procurement of materials and equipment, and manage vendor relationships to ensure timely delivery and cost-effective solutions. Lead and motivate project teams, providing guidance, support, and mentorship to ensure optimal performance and productivity. Prepare regular progress reports and presentations for senior management and clients, highlighting key milestones, achievements, and challenges. Foster a culture of continuous improvement, innovation, and excellence within the project team and across the organization. Requirements: Proven experience in mechanical project management within the construction or engineering industry, preferably with a focus on HVAC, plumbing, or piping systems. Confidence managing project values from £1M-10M. Strong technical knowledge of mechanical systems, building codes, regulations, and industry best practices. Excellent leadership, communication, and interpersonal skills, with the ability to inspire and motivate multidisciplinary teams. Proficiency in project management software tools such as Primavera, Microsoft Project, or equivalent. Sound understanding of health and safety regulations, risk management, and quality assurance processes. Strong problem-solving skills, with a proactive and solutions-oriented approach to project challenges. Willingness to travel to project sites as required.
May 01, 2024
Full time
Job Title: Mechanical Project Manager Company Overview: My client is a leading Mechanical & Electrical subcontractor specialising in Education, Industrial, Commercial, and Government Sites projects. With a reputation for excellence and innovation, they deliver high-quality projects on time and within budget. Their team is committed to exceeding client expectations through meticulous planning, efficient execution, and superior project management. Position Overview: They are seeking an experienced Mechanical Project Manager to join their dynamic team. The successful candidate will oversee all aspects of mechanical project management, ensuring the successful delivery of projects from conception to completion. The role requires strong leadership skills, exceptional technical expertise, and the ability to collaborate effectively with internal teams and external stakeholders. The work will include some or the majority of the following systems: power (HV or LV), lighting, data, security systems, life safety systems, disabled systems, heating, cooling, ventilation, BMS, IBT, domestics, etc. Responsibilities: Manage all aspects of mechanical projects, including planning, scheduling, budgeting, and resource allocation. Liaise with clients, architects, engineers, subcontractors, and other stakeholders to ensure project objectives are met. Prepare project proposals, budgets, and schedules, and present them to clients for approval. Monitor project progress, identify potential risks or obstacles, and implement effective mitigation strategies. Conduct regular site inspections to ensure compliance with project specifications, safety regulations, and quality standards. Oversee procurement of materials and equipment, and manage vendor relationships to ensure timely delivery and cost-effective solutions. Lead and motivate project teams, providing guidance, support, and mentorship to ensure optimal performance and productivity. Prepare regular progress reports and presentations for senior management and clients, highlighting key milestones, achievements, and challenges. Foster a culture of continuous improvement, innovation, and excellence within the project team and across the organization. Requirements: Proven experience in mechanical project management within the construction or engineering industry, preferably with a focus on HVAC, plumbing, or piping systems. Confidence managing project values from £1M-10M. Strong technical knowledge of mechanical systems, building codes, regulations, and industry best practices. Excellent leadership, communication, and interpersonal skills, with the ability to inspire and motivate multidisciplinary teams. Proficiency in project management software tools such as Primavera, Microsoft Project, or equivalent. Sound understanding of health and safety regulations, risk management, and quality assurance processes. Strong problem-solving skills, with a proactive and solutions-oriented approach to project challenges. Willingness to travel to project sites as required.
Job Role: Operations Manager Air Source Heat Pump Area: Medway Towns Salary: £50k - £55k My client is looking for an Air Source Heat Pump Operations manage this is a great opportunity for an experienced Lead Heat Pump Engineer to join a reputable company, with plenty of opportunity for progression. Initially you ll be working as an Installer however as the first hire in this division, as the business grows you will be progressed, eventually heading up the business. Responsibilities: Lead the technical aspects of installing monobloc and split air source heat pumps in residential properties. Ensure projects adhere to timelines and take responsibility for meeting delivery Key Performance Indicators (KPIs), including project budgets. Successfully overcome any technical challenges on site, liaising with the customer and office. You'll be responsible for installing Air Source Heat Pumps. The role will also include some survey's, planning, and commissioning as well as supervising and training team members. Although mainly installing and commissioning of systems, the role will also involve some service/repair and maintenance works. Working mobile and covering the Southeast of England. The ideal candidate will be: Qualified domestic plumbing and heating engineer - ideally NVQ 2/3 etc. Air Source Heat Pump installation experience - minimum 5 years experience. BPEC level 3, MCS accreditation or equivalent in heat pumps. Must be commutable to Kent This role is being handled by Chloe and Samantha, PW Construction Recruitment. Please apply with your CV or alternatively call (phone number removed) or email (url removed) / (url removed) for more information. Not quite the right role but still looking? Whether you are entry or Executive level, our team of experienced Recruitment specialists can help you with your career. We are Kent s leading independent consultancy and pride ourselves on delivering an exceptional service to both candidates and clients. Find us on and
May 01, 2024
Full time
Job Role: Operations Manager Air Source Heat Pump Area: Medway Towns Salary: £50k - £55k My client is looking for an Air Source Heat Pump Operations manage this is a great opportunity for an experienced Lead Heat Pump Engineer to join a reputable company, with plenty of opportunity for progression. Initially you ll be working as an Installer however as the first hire in this division, as the business grows you will be progressed, eventually heading up the business. Responsibilities: Lead the technical aspects of installing monobloc and split air source heat pumps in residential properties. Ensure projects adhere to timelines and take responsibility for meeting delivery Key Performance Indicators (KPIs), including project budgets. Successfully overcome any technical challenges on site, liaising with the customer and office. You'll be responsible for installing Air Source Heat Pumps. The role will also include some survey's, planning, and commissioning as well as supervising and training team members. Although mainly installing and commissioning of systems, the role will also involve some service/repair and maintenance works. Working mobile and covering the Southeast of England. The ideal candidate will be: Qualified domestic plumbing and heating engineer - ideally NVQ 2/3 etc. Air Source Heat Pump installation experience - minimum 5 years experience. BPEC level 3, MCS accreditation or equivalent in heat pumps. Must be commutable to Kent This role is being handled by Chloe and Samantha, PW Construction Recruitment. Please apply with your CV or alternatively call (phone number removed) or email (url removed) / (url removed) for more information. Not quite the right role but still looking? Whether you are entry or Executive level, our team of experienced Recruitment specialists can help you with your career. We are Kent s leading independent consultancy and pride ourselves on delivering an exceptional service to both candidates and clients. Find us on and
Heating Engineer Location: Glasgow Salary: £37,000 to £39,000 per annum Benefits: Earn £45K with Regular Overtime and Travel Time + Excellent Pension and More! Aspirare presents an exciting opportunity for a Heating Engineer to join our client, a leading M&E services provider in Glasgow. This role involves working with a highly skilled projects team on mechanical installations on sites around the central belt. What s On Offer: Competitive salary up to £39,000 per annum. Potential earnings exceeding £45K per year with regular overtime paid at an increased rate. Travel time paid at an increased rate after 30 minutes. Company-provided vehicle, tools, and uniform. The Role: Working on projects across the central belt of Scotland. Undertake plantroom and boiler house installations including installation of commercial heating, plumbing and chilled water systems. Working to your own initiative and running jobs as part of a small team. Pipefitting using brazed, soldered, welder, press fit and victaulic fittings. Key Requirements: Qualified Pipefitter/Heating Engineer (Senior Craftsman Desirable) Welding experience Arc & Gas. ACS Gas safe credits/testing & purging advantageous. Strong communication skills and comfortable working in a client facing role. Apply Now: If you are a Heating Engineer seeking your next opportunity with a business that offers fantastic training opportunities, career stability, and security, then look no further apply now! Note: Only applicants with the legal right to work in the UK will be considered. We do not provide work visas; this must be arranged before applying.
May 01, 2024
Full time
Heating Engineer Location: Glasgow Salary: £37,000 to £39,000 per annum Benefits: Earn £45K with Regular Overtime and Travel Time + Excellent Pension and More! Aspirare presents an exciting opportunity for a Heating Engineer to join our client, a leading M&E services provider in Glasgow. This role involves working with a highly skilled projects team on mechanical installations on sites around the central belt. What s On Offer: Competitive salary up to £39,000 per annum. Potential earnings exceeding £45K per year with regular overtime paid at an increased rate. Travel time paid at an increased rate after 30 minutes. Company-provided vehicle, tools, and uniform. The Role: Working on projects across the central belt of Scotland. Undertake plantroom and boiler house installations including installation of commercial heating, plumbing and chilled water systems. Working to your own initiative and running jobs as part of a small team. Pipefitting using brazed, soldered, welder, press fit and victaulic fittings. Key Requirements: Qualified Pipefitter/Heating Engineer (Senior Craftsman Desirable) Welding experience Arc & Gas. ACS Gas safe credits/testing & purging advantageous. Strong communication skills and comfortable working in a client facing role. Apply Now: If you are a Heating Engineer seeking your next opportunity with a business that offers fantastic training opportunities, career stability, and security, then look no further apply now! Note: Only applicants with the legal right to work in the UK will be considered. We do not provide work visas; this must be arranged before applying.
Madisons Recruitment are looking for a Commercial Gas Engineer on a permanent basis located in Surrey. Commercial Gas Engineer responsible for servicing, maintaining, installing, and refurbishing full plant rooms. Additionally, proficient in handling reactionary call-outs and addressing breakdowns. Responsibilities Be on out of hours call out rota, attend emergency repair works as required Servicing, diagnostics and repairs of gas boilers, HVAC equipment, gas appliances, heating systems, hot water systems and gas pipe work etc. in both domestic and commercial settings Install and repair underfloor heating systems Performing gas safety certificates Attending emergency gas and water leaks Conduct inspections and tests to ensure the safe operation of gas equipment Assemble and install gas pipes, valves, fittings, and appliances Ensure customer satisfaction and safety Work independently and as part of a team Carry out planned and reactive maintenance Requirements Valid Gas Safe registration. NVQ Level 2/3 in Plumbing and Heating or equivalent qualification. Proven experience in gas and plumbing services. Excellent problem-solving skills and attention to detail. Strong customer service and communication skills. Full UK drivers license Benefits Company van & fuel card Company pension On-site parking Sick pay If you are actively search for a new role and interested in hearing more on the above position, please apply or contact using any of the methods below. Consultant Name: Oliver McIntyre Landline: (phone number removed) Mobile: (phone number removed) Email: (url removed) INDHP
May 01, 2024
Full time
Madisons Recruitment are looking for a Commercial Gas Engineer on a permanent basis located in Surrey. Commercial Gas Engineer responsible for servicing, maintaining, installing, and refurbishing full plant rooms. Additionally, proficient in handling reactionary call-outs and addressing breakdowns. Responsibilities Be on out of hours call out rota, attend emergency repair works as required Servicing, diagnostics and repairs of gas boilers, HVAC equipment, gas appliances, heating systems, hot water systems and gas pipe work etc. in both domestic and commercial settings Install and repair underfloor heating systems Performing gas safety certificates Attending emergency gas and water leaks Conduct inspections and tests to ensure the safe operation of gas equipment Assemble and install gas pipes, valves, fittings, and appliances Ensure customer satisfaction and safety Work independently and as part of a team Carry out planned and reactive maintenance Requirements Valid Gas Safe registration. NVQ Level 2/3 in Plumbing and Heating or equivalent qualification. Proven experience in gas and plumbing services. Excellent problem-solving skills and attention to detail. Strong customer service and communication skills. Full UK drivers license Benefits Company van & fuel card Company pension On-site parking Sick pay If you are actively search for a new role and interested in hearing more on the above position, please apply or contact using any of the methods below. Consultant Name: Oliver McIntyre Landline: (phone number removed) Mobile: (phone number removed) Email: (url removed) INDHP
Job Title: Mobile Gas Engineer (commercial, not domestic) This is a field based, mobile position covering the Stoke and surrounding regions covering the postcodes: ST. SY. TF. WV. WS. You'll be required to work on a number of high street retail & high street banking outlets for the TS-Mobile division. The salary is based between 30,744- 46,791. The salary on offer is dependant upon the candidate s qualifications and experience. In your new job as a Commercial Gas Engineer you will be responsible for carrying out Planned Preventative Maintenance on gas appliances, carrying out reactive & emergency tasks on gas appliances and plumbing maintenance. Able to anticipate and/or diagnose and repair faults. Ensure all tasks are completed within the contractual timescales and all work-related documentation is completed accurately. You will need experience of maintenance, testing & fault finding in a variety of plant equipment such as gas appliances, gas boilers, heating plant, pumps and ventilation, minor plumbing experience. You will also need a valid gas safe registration, relevant commercial gas qualifications including: COCN1, CCN1, TPCP1, TPCP1A, CODNCO1 and a full UK Driving License. If you are interested in this position, please apply here.
May 01, 2024
Full time
Job Title: Mobile Gas Engineer (commercial, not domestic) This is a field based, mobile position covering the Stoke and surrounding regions covering the postcodes: ST. SY. TF. WV. WS. You'll be required to work on a number of high street retail & high street banking outlets for the TS-Mobile division. The salary is based between 30,744- 46,791. The salary on offer is dependant upon the candidate s qualifications and experience. In your new job as a Commercial Gas Engineer you will be responsible for carrying out Planned Preventative Maintenance on gas appliances, carrying out reactive & emergency tasks on gas appliances and plumbing maintenance. Able to anticipate and/or diagnose and repair faults. Ensure all tasks are completed within the contractual timescales and all work-related documentation is completed accurately. You will need experience of maintenance, testing & fault finding in a variety of plant equipment such as gas appliances, gas boilers, heating plant, pumps and ventilation, minor plumbing experience. You will also need a valid gas safe registration, relevant commercial gas qualifications including: COCN1, CCN1, TPCP1, TPCP1A, CODNCO1 and a full UK Driving License. If you are interested in this position, please apply here.
About Company Working for one of the largest social housing providers offering the opportunity to take on a Gas Engineer on a permanent basis to cover Oxford and surrounding areas. About the role & area Working within a 50 mile radius of Oxford Servicing and repair duties for domestic boilers, heating systems, unvented cylinders and control systems within domestic properties. Carrying out servicing, testing, repairs and minor installations Mainly working on social housing, occupied and void properties Experience with fault finding on modern condensing boilers. Diagnosing faults and rectifying in a prompt and appropriate manner. Conducting safe and proper use of all mechanical and non-mechanical plant and equipment under their direct control. Undertaking a range of service and maintenance works, repairing or replacing items to maintain properties to a high standard, including producing gas safety certificates, in line with the role skills framework. Complete works in conjunction with all health and safety procedures, policies and legislation. Working unsupervised and in occupied or unoccupied (void) properties and complying with the Code of Conduct. Competent in the completion of reports, ordering materials and completing orders. Essential Qualifications ACS core accreditation in domestic Gas with cookers and fires. Gas Safe Registered. City & Guilds, NVQ level 3 or similar ACS including CCN1 CEN1 WAT1 HTR1 CKR1 CPA1 UVHW Desirable Qualifications LPG, Commercial Plumbing NVQ Solar thermal MET1 ASHP Working Hours & Call outs Working hours - Full Time (39 hours per week) Participate in an out of hours emergency rota and attend call-outs as required. Call outs during the Summer are 1 in 8 weeks Call outs during the Winter are 1 in 4 weeks Call outs are paid at £320 at a time Time and a half paid Full driving licence and able to travel between sites. Flexible approach to working hours and undertake call-outs as part of out of hours rota. If successful we will require a DBS check to be completed. Further details will be sent following offer. Salary & Benefits £38,000-£48,000 per annum - depending on skills and experience Van and fuel card included Annual holiday entitlement (plus statutory bank holidays); a defined contribution pension scheme; trust based flexible working and a Confidential Employee Assistance Programme (EAP). Apply now for this opportunity
May 01, 2024
Full time
About Company Working for one of the largest social housing providers offering the opportunity to take on a Gas Engineer on a permanent basis to cover Oxford and surrounding areas. About the role & area Working within a 50 mile radius of Oxford Servicing and repair duties for domestic boilers, heating systems, unvented cylinders and control systems within domestic properties. Carrying out servicing, testing, repairs and minor installations Mainly working on social housing, occupied and void properties Experience with fault finding on modern condensing boilers. Diagnosing faults and rectifying in a prompt and appropriate manner. Conducting safe and proper use of all mechanical and non-mechanical plant and equipment under their direct control. Undertaking a range of service and maintenance works, repairing or replacing items to maintain properties to a high standard, including producing gas safety certificates, in line with the role skills framework. Complete works in conjunction with all health and safety procedures, policies and legislation. Working unsupervised and in occupied or unoccupied (void) properties and complying with the Code of Conduct. Competent in the completion of reports, ordering materials and completing orders. Essential Qualifications ACS core accreditation in domestic Gas with cookers and fires. Gas Safe Registered. City & Guilds, NVQ level 3 or similar ACS including CCN1 CEN1 WAT1 HTR1 CKR1 CPA1 UVHW Desirable Qualifications LPG, Commercial Plumbing NVQ Solar thermal MET1 ASHP Working Hours & Call outs Working hours - Full Time (39 hours per week) Participate in an out of hours emergency rota and attend call-outs as required. Call outs during the Summer are 1 in 8 weeks Call outs during the Winter are 1 in 4 weeks Call outs are paid at £320 at a time Time and a half paid Full driving licence and able to travel between sites. Flexible approach to working hours and undertake call-outs as part of out of hours rota. If successful we will require a DBS check to be completed. Further details will be sent following offer. Salary & Benefits £38,000-£48,000 per annum - depending on skills and experience Van and fuel card included Annual holiday entitlement (plus statutory bank holidays); a defined contribution pension scheme; trust based flexible working and a Confidential Employee Assistance Programme (EAP). Apply now for this opportunity