PRL Site Solutions

MUST HAVE CCNSG NAECI BLUE BOOK SITE MUST HAVE BLUE BOOK SITE WORK EXPERIENCE ! An Electrician NVQ Level 3 on a UK-based Energy from Waste (EfW) site installs, maintains, and repairs electrical systems and equipment. Key responsibilities include: - Electrical Installation and Maintenance: Installing, testing, and maintaining electrical systems, panels, and equipment - Fault Finding and Repair: Troubleshooting and fixing electrical faults, ensuring minimal downtime - Compliance: Ensuring work meets UK electrical regulations (e.g., BS 7671, Electricity at Work Regulations 1989) - Safety: Following site safety procedures and conducting risk assessments - Documentation: Maintaining accurate records of work, test results, and certifications Typically requires: - NVQ Level 3 in Electrical Installation - ECS card or equivalent - Experience with industrial electrical systems and control panels - UK electrical certification (e.g., NICEIC, ECA)

An Electrical QA/QC role on a factory new build project in the UK involves ensuring electrical installations meet quality and safety standards. Key responsibilities include: - Inspecting and Testing: Verifying electrical systems, components, and wiring comply with BS7671 and project specs. - Documentation: Reviewing and approving electrical drawings, test certificates, and inspection reports. - Quality Checks: Conducting audits and inspections to ensure compliance with quality procedures. - Non-Conformance Reporting: Identifying and reporting defects, ensuring corrective actions are taken. - Liaising with Contractors: Coordinating with electrical contractors, engineers, and site teams. Typical requirements include: - Qualifications: 2391, 2394, or 2395 certification, with ECS Gold Card. - Experience: Proven QA/QC experience in electrical engineering or construction. - Knowledge: Strong understanding of BS7671, electrical safety, and quality management systems.

Main job: Carry out groundwork tasks on a Carbon Capture facility new build, working to NVQ Level 2 standards, including earthworks, drainage, and basic civils. Key Responsibilities 1. Ground prep: Clear land, set out levels, mark areas 2. Excavation: Dig trenches, lay pipes, spread hardcore 3. Drainage & civils: Install kerbs, manholes, basic concrete 4. Compliance: Meet BS and Carbon Capture project specs 5. Safety: Follow site rules, wear PPE, report hazards 6. Teamwork: Work with supervisors, engineers, and other trades Requirements UK 2026 - Quals: NVQ Level 2 in Groundworks or equiv - Experience: 1-2 years groundwork experience - Skills: Manual handling, basic tools, reading plans - Certs: CSCS card (labourer or operative) Typical Day - AM: Briefing, PPE check, plan tasks - Work: Dig, lay, tidy - PM: Report progress, issues

- Key Responsibilities: - Manage a team of electricians and instrumentation technicians - Ensure compliance with design specifications, safety standards, and project timelines - Coordinate with other supervisors, engineers, and contractors - Conduct site inspections and quality checks - Review and approve documentation, including test records and inspection reports - Technical Requirements: - In-depth knowledge of electrical and instrumentation systems, including wiring, control systems, and instrumentation calibration - Familiarity with relevant UK standards and regulations (e.g., BS 7671, IEC 61511) - Experience with project management software and documentation control - Skills and Qualities: - Strong leadership and communication skills - Attention to detail and ability to troubleshoot complex issues - Problem-solving and analytical skills - Ability to work under pressure and meet deadlines Typical qualifications include an HNC/HND in Electrical Engineering or a related field, plus several years of experience in a similar role. Relevant certifications, such as City & Guilds or EAL, are also beneficial.

Main job: Operate a 360 tracked excavator (aka digger) to dig, load, demolish, and move materials on construction, quarrying, or groundworks sites. Key Responsibilities 1. Operate the excavator: Use controls to dig, slew, travel, and load materials 2. Site tasks: Excavate trenches, foundations, level ground, load lorries 3. Safety checks: Pre-start checks, watch for hazards, keep people clear of swing 4. Attachments: Swap buckets, breakers, grabs as needed 5. Compliance: Follow site rules, PUWER, banksman signals 6. Efficiency: Meet production targets, minimise damage to surfaces 7. End of shift: Park safely, report faults, refuel Requirements UK 2026 - Quals: CPCS or NPORS card for 360 excavators (A2 or equiv). CPCS red/blue depending on size - Experience: 2-5 years operating 360s. Experience with breakers, rock buckets helpful - Tickets: CSCS card, SMSTS if managing others - Skills: Good spatial awareness, smooth controls, communication Typical Day - Morning: Checks, toolbox talk, plan jobs - Work: Dig, break, load, move material - End: Clean machine, report defects

Main job: Pull, install, and manage HV/LV cables through ducts, cable trays, and containment on an Energy-from-Waste new build site.Key ResponsibilitiesCable installation: Pull main power, control, and instrumentation cables using winches, rollers, and pulling socksCable management: Dress, route, clip, and label cables to spec and BS 7671 / BS 5839Containment: Work with cable tray, basket, trunking, and duct systemsSafety: Follow permit-to-work, LOTO, and EfW site safety rules. Watch for pinch points and manual handling risksTesting support: Assist electricians with continuity, IR, and cable schedule checksSite discipline: Keep work areas tidy, store materials correctlyRequirements UK 2026Quals: CSCS Labourer or ECS Labourer card minimum. ECS Trainee Electrician card preferredExperience: 1-2 years cable pulling on industrial/commercial sites. EfW, power station, or data centre experience is a plusSkills: Manual handling, basic tool use, reading cable schedules, teamworkSafety: SSSTS or SMSTS an advantage. Confined space awareness useful on EfW sitesTypical DayAM: Toolbox talk, RAMS review, collect materialsWork: Set rollers, pull cable runs, terminate tails, labelPM: Tidy containment, update cable logs, handover to electricians

Main job: Set out, check, and control lines, levels, and dimensions for concrete structures and civil works on construction sites. You re the one making sure what s built matches the drawings.Key ResponsibilitiesSetting out: Transfer design data from drawings/BIM to site using total station, GPS, or laserConcrete structures: Set formwork lines, slab levels, column/grid lines, pile positionsCivils works: Set kerb lines, drainage falls, road levels, foundationsQA & records: Check tolerances, produce as-built surveys, keep setting out booksSafety: Follow CDM 2015, site rules, and risk assessmentsCoordination: Work with site managers, steel fixers, formwork teamsIssue resolution: Spot clashes/errors early and propose fixesRequirements UK 2026Quals: HNC/HND or degree in Civil Eng, Surveying, or GeospatialExperience: 2-5 years setting out on structures, civils, or building projectsSkills: Total station, GPS/GNSS, AutoCAD, Civil 3D, 12D, RebarCerts: CSCS card, SMSTS a plus. TPS or RICS route if charteredKnowledge: BS EN tolerances for concrete, surveying methodsTypical DayAM: Download data, check drawings, issue levels to gangsWork: Set out formwork, pour checks, record as-builtsPM: Survey records, handover points to next shift

A cleaner's job description typically includes a range of duties and responsibilities, which may vary depending on the specific job and the type of cleaning service. Cleaning and Sanitizing : Perform routine cleaning tasks to maintain cleanliness and hygiene in various environments, including homes, offices, schools, and hospitals. Using Cleaning Equipment : Utilize appropriate cleaning equipment such as vacuum cleaners, floor polishers, and other cleaning tools. Safety Protocols : Follow safety protocols and use personal protective equipment (PPE) as necessary, such as gloves or face masks. Inventory Management : Monitor inventory levels of cleaning supplies and request replenishment as needed. Reporting : Report any safety hazards, accidents, or incidents to the supervisor immediately. Collaboration : Collaborate with other cleaning staff to ensure consistent and efficient cleaning operations. Details : We are looking for a cleaner over at a new job in Birkenhead,(1 toilet block + 2 offices + canteen + drying room). The start date for the new job would be from Thursday (16th). We'd be looking for 12-20hrs a week i.e. 3-5 4hr shifts.

Key Responsibilities: - Supervise and Coordinate: Manage piping installation, maintenance, and repair activities, ensuring compliance with project specifications and safety regulations. - Quality Control: Inspect work progress, equipment, and construction sites to verify safety and ensure specifications are met. - Team Management: Lead and guide a team of pipefitters, ensuring productivity and quality standards are met. - Planning and Scheduling: Develop project schedules, assign tasks, and monitor progress. - Safety and Compliance: Ensure compliance with health and safety regulations, company policies, and industry standards. - Communication: Liaise with project managers, engineers, clients, and subcontractors to maintain progress and resolve issues . Requirements: - Proven experience as a Piping Supervisor or similar role - Knowledge of piping systems, construction methods, and safety regulations - Excellent leadership and project management skills - Ability to read and understand technical drawings and blueprints - Strong problem-solving abilities and communication skills - CSCS card and relevant industry certifications (e.g., SMSTS, IOSH Managing Safely)