PAYE only 4 x JIB Approved Electricians First 37.5 hours 23.73 per hour Weekday overtime over 37.5 hours 35.60 per hour 2 x JIB graded electricians First 37.5 hours 21.89 per hour Weekday overtime over 37.5 hours 32.84 per hour needed for one of the largest M&E contractors in the UK New build site in London, W1 (Mayfair) First 37.5 hours 23.73 per hour Weekday overtime over 37.5 hours 35.60 per hour 44 hours a week minimum 9 months work Please call Harry on (phone number removed)
01/09/2026
Full time
PAYE only 4 x JIB Approved Electricians First 37.5 hours 23.73 per hour Weekday overtime over 37.5 hours 35.60 per hour 2 x JIB graded electricians First 37.5 hours 21.89 per hour Weekday overtime over 37.5 hours 32.84 per hour needed for one of the largest M&E contractors in the UK New build site in London, W1 (Mayfair) First 37.5 hours 23.73 per hour Weekday overtime over 37.5 hours 35.60 per hour 44 hours a week minimum 9 months work Please call Harry on (phone number removed)
We are looking for an experienced Shuttering Joiner / Formwork Carpenter to join our construction team. The successful candidate will be responsible for constructing, installing and dismantling timber and other formwork systems used for reinforced concrete structures. You will need blue CSCS. This is a hands-on site-based role requiring good carpentry skills, attention to detail and the ability to work safely and efficiently as part of a team. Key Responsibilities Set out and construct timber shuttering and formwork to drawings and specifications. Install and dismantle formwork for concrete foundations, walls, columns, beams and slabs. Measure, cut and assemble timber and other materials accurately. Read and interpret construction drawings and specifications. Ensure formwork is level, plumb, secure and correctly aligned before concrete is poured. Work with steel reinforcement and other trades where required. Inspect completed formwork and rectify any defects or issues. Maintain tools, equipment and the work area in a safe and tidy condition. Follow all site health and safety procedures. Work effectively with site managers, engineers and other trades. Requirements Proven experience as a Shuttering Joiner, Shuttering Carpenter or Formwork Carpenter . Strong knowledge of formwork and concrete construction. Good practical carpentry and measuring skills. Ability to read and understand construction drawings. Ability to work accurately to measurements and specifications. Good understanding of construction-site health and safety. Reliable, hardworking and able to work as part of a team. Physically fit and comfortable working on active construction sites. Relevant qualifications or CSCS certification are desirable/required depending on site requirements. What We Offer Competitive rate of pay. Consistent work and opportunities for additional hours. Professional and supportive site team. Opportunities to work on a range of construction projects. Potential for long-term employment for the right candidate.
01/09/2026
Contract
We are looking for an experienced Shuttering Joiner / Formwork Carpenter to join our construction team. The successful candidate will be responsible for constructing, installing and dismantling timber and other formwork systems used for reinforced concrete structures. You will need blue CSCS. This is a hands-on site-based role requiring good carpentry skills, attention to detail and the ability to work safely and efficiently as part of a team. Key Responsibilities Set out and construct timber shuttering and formwork to drawings and specifications. Install and dismantle formwork for concrete foundations, walls, columns, beams and slabs. Measure, cut and assemble timber and other materials accurately. Read and interpret construction drawings and specifications. Ensure formwork is level, plumb, secure and correctly aligned before concrete is poured. Work with steel reinforcement and other trades where required. Inspect completed formwork and rectify any defects or issues. Maintain tools, equipment and the work area in a safe and tidy condition. Follow all site health and safety procedures. Work effectively with site managers, engineers and other trades. Requirements Proven experience as a Shuttering Joiner, Shuttering Carpenter or Formwork Carpenter . Strong knowledge of formwork and concrete construction. Good practical carpentry and measuring skills. Ability to read and understand construction drawings. Ability to work accurately to measurements and specifications. Good understanding of construction-site health and safety. Reliable, hardworking and able to work as part of a team. Physically fit and comfortable working on active construction sites. Relevant qualifications or CSCS certification are desirable/required depending on site requirements. What We Offer Competitive rate of pay. Consistent work and opportunities for additional hours. Professional and supportive site team. Opportunities to work on a range of construction projects. Potential for long-term employment for the right candidate.
Reports To Maintenance Manager / Engineering Manager Job Purpose To carry out planned, preventative and reactive electrical maintenance across the site, ensuring all electrical equipment, machinery and building services operate safely, reliably and efficiently. The role will be responsible for diagnosing faults, completing repairs and supporting continuous improvement of site electrical systems. Key Responsibilities Carry out planned preventative maintenance (PPM) on electrical equipment and machinery. Respond promptly to electrical breakdowns and diagnose faults to minimise production downtime. Install, maintain, test and repair electrical systems, machinery and equipment. Carry out electrical fault-finding using appropriate testing and diagnostic equipment. Complete inspections, testing and remedial works in accordance with company procedures and relevant legislation. Read and interpret electrical drawings, schematics and technical documentation. Maintain accurate records of maintenance activities, faults, repairs and parts used. Assist with installation and commissioning of new machinery and electrical systems. Work safely in accordance with company Health & Safety procedures and electrical safety standards. Identify potential electrical hazards and recommend corrective actions. Liaise with production and other engineering personnel to prioritise maintenance requirements. Support contractors and external engineers where required. Participate in continuous improvement and reliability projects. Maintain tools, equipment and work areas in a safe and orderly condition. Participate in an on-call, shift or overtime rota where applicable. Essential Qualifications & Experience Recognised electrical qualification, such as NVQ Level 3, City & Guilds or equivalent. 18 You have a gold JIB card You have a current DBS check?
01/09/2026
Full time
Reports To Maintenance Manager / Engineering Manager Job Purpose To carry out planned, preventative and reactive electrical maintenance across the site, ensuring all electrical equipment, machinery and building services operate safely, reliably and efficiently. The role will be responsible for diagnosing faults, completing repairs and supporting continuous improvement of site electrical systems. Key Responsibilities Carry out planned preventative maintenance (PPM) on electrical equipment and machinery. Respond promptly to electrical breakdowns and diagnose faults to minimise production downtime. Install, maintain, test and repair electrical systems, machinery and equipment. Carry out electrical fault-finding using appropriate testing and diagnostic equipment. Complete inspections, testing and remedial works in accordance with company procedures and relevant legislation. Read and interpret electrical drawings, schematics and technical documentation. Maintain accurate records of maintenance activities, faults, repairs and parts used. Assist with installation and commissioning of new machinery and electrical systems. Work safely in accordance with company Health & Safety procedures and electrical safety standards. Identify potential electrical hazards and recommend corrective actions. Liaise with production and other engineering personnel to prioritise maintenance requirements. Support contractors and external engineers where required. Participate in continuous improvement and reliability projects. Maintain tools, equipment and work areas in a safe and orderly condition. Participate in an on-call, shift or overtime rota where applicable. Essential Qualifications & Experience Recognised electrical qualification, such as NVQ Level 3, City & Guilds or equivalent. 18 You have a gold JIB card You have a current DBS check?
3 x EV Electricians to conduct Surveys on multiple hotel car parks for the eventual installation of EV charging points. This is a long term position, I'm looking for someone to conduct surveys / reports of the car park then followed by the installation. Please feel free to call me and i will explain in-detail. Ideally happy to travel. Company van & fuel card provided, digs, ppe, food allowance will be available. Being based in or near to the midlands is a good base, a lot of the hotels will be within a couple of hours of the midlands. Please keep in-mind, the hotels will be scattered around the UK. We'll do our best to keep each electrician mostly local to their home city/town. Must have 2391, JIB, Ev charging experience is not essential . 300 per shift - 2 surveys 350 per shift - 3 surveys Please call Harry from McLaren on (phone number removed)
01/09/2026
Contract
3 x EV Electricians to conduct Surveys on multiple hotel car parks for the eventual installation of EV charging points. This is a long term position, I'm looking for someone to conduct surveys / reports of the car park then followed by the installation. Please feel free to call me and i will explain in-detail. Ideally happy to travel. Company van & fuel card provided, digs, ppe, food allowance will be available. Being based in or near to the midlands is a good base, a lot of the hotels will be within a couple of hours of the midlands. Please keep in-mind, the hotels will be scattered around the UK. We'll do our best to keep each electrician mostly local to their home city/town. Must have 2391, JIB, Ev charging experience is not essential . 300 per shift - 2 surveys 350 per shift - 3 surveys Please call Harry from McLaren on (phone number removed)
