Robert Hurst Limited

An Approved Electrician is expected to work independently, supervise others, and install electrical systems to a high standard in line with BS 7671 (18th Edition Wiring Regulations). Metal Containment Work (Tray & Basket) Cable Tray Installation Installing galvanised steel tray systems for supporting large cable runs Measuring, cutting, bending, and assembling tray sections Installing brackets, supports, and threaded rod systems Ensuring correct spacing, load capacity, and structural integrity Cable Basket Installation Installing wire mesh (basket) containment mainly for data/lighting circuits Cutting and forming basket bends, tees, and risers Fixing to ceilings, walls, or raised floors Maintaining neat cable routing and segregation (e.g., power vs data) Trunking & Conduit Installing metal trunking systems (surface or flush) Bending, threading, and installing steel conduit Pulling cables through containment safely Ensuring compliance with earthing and bonding requirements Additional Responsibilities Reading and interpreting electrical drawings and schematics Marking out routes for containment systems Working at height (ladders, towers, MEWPs) Supervising improvers/mates/apprentices Testing and inspection (if qualified) Maintaining site safety in line with Health and Safety Executive guidelines Skills & Requirements NVQ Level 3 in Electrical Installation (or equivalent) 18th Edition (BS 7671) qualification ECS Gold Card (Approved Electrician status) Strong experience with containment systems (tray, basket, trunking) Ability to work from drawings without supervision Good practical skills (cutting, bending, measuring accurately) IPAF is required

An Approved Electrician is expected to work independently, supervise others, and install electrical systems to a high standard in line with BS 7671 (18th Edition Wiring Regulations). Metal Containment Work (Tray & Basket) Cable Tray Installation Installing galvanised steel tray systems for supporting large cable runs Measuring, cutting, bending, and assembling tray sections Installing brackets, supports, and threaded rod systems Ensuring correct spacing, load capacity, and structural integrity Cable Basket Installation Installing wire mesh (basket) containment mainly for data/lighting circuits Cutting and forming basket bends, tees, and risers Fixing to ceilings, walls, or raised floors Maintaining neat cable routing and segregation (e.g., power vs data) Trunking & Conduit Installing metal trunking systems (surface or flush) Bending, threading, and installing steel conduit Pulling cables through containment safely Ensuring compliance with earthing and bonding requirements Additional Responsibilities Reading and interpreting electrical drawings and schematics Marking out routes for containment systems Working at height (ladders, towers, MEWPs) Supervising improvers/mates/apprentices Testing and inspection (if qualified) Maintaining site safety in line with Health and Safety Executive guidelines Skills & Requirements NVQ Level 3 in Electrical Installation (or equivalent) 18th Edition (BS 7671) qualification ECS Gold Card (Approved Electrician status) Strong experience with containment systems (tray, basket, trunking) Ability to work from drawings without supervision Good practical skills (cutting, bending, measuring accurately) DV or SC Clearance preferred Parking available

Senior Construction Manager (Mechanical) Location: London (Mechanical Package) Job Type: Full-Time, Permanent Salary 90,000 - 105,000 per annum (depending on experience) Project Details Sector: Commercial Offices Project Value: 45 million Scope: Shell & Core Build: 37-storey office block Role Overview We are currently seeking an experienced Senior Construction Manager (Lead) to join a flagship commercial office project based in London. This is a key leadership role overseeing the mechanical package on a major high-rise development. You will play a pivotal role in driving delivery, quality, and performance across the construction phase, working as part of the senior leadership team on-site. Key Responsibilities Lead and manage the construction team on a high-profile project Oversee the mechanical (M&E) elements of a 37-storey commercial office build Ensure successful delivery of Shell & Core works to programme and budget Report directly to the Project Director Act as a key member of the Project Senior Leadership Team Drive health & safety, quality, and operational excellence across the site Coordinate with subcontractors, consultants, and stakeholders Requirements Proven experience in a Senior Construction Manager or similar leadership role Strong background in large-scale commercial office projects Experience managing mechanical packages on high-rise developments Demonstrated ability to lead teams on complex, high-value projects Excellent communication and stakeholder management skills

Ductwork Fitter Location: London (covering Greater London area) Job Type: Permanent, Full-Time Working Hours Monday to Friday, 8:00 AM - 4:30 PM Salary 48,000 - 55,000 per annum (depending on experience) Job Overview We are seeking an experienced and reliable Ductwork Fitter to join our team, working across London. This is a permanent, full-time position suited to a skilled individual with a solid background in ductwork installation and the ability to interpret technical drawings. Key Responsibilities Installation of ductwork systems in line with project specifications Reading and interpreting technical drawings and designs Carrying out general ductwork fitting duties on-site Ensuring all work is completed safely and to a high standard Collaborating with site teams and supervisors to meet project deadlines Requirements Minimum of 2 years' experience as a qualified ductwork fitter Relevant NVQ qualification Valid CSCS card IPAF certification PASMA certification Ability to read and work from technical drawings Benefits 20 days annual leave plus bank holidays Company pension scheme Company van provided (if required)

RHL is looking for a Project Manager (CDM) Location: Central London office Duration: Initial 6-week contract Working Pattern: 2-3 days per week Salary/Rate: Competitive (dependent on experience) About the Role We are seeking an experienced Project Manager (CDM) with a strong background in rail infrastructure projects, ideally with proven experience working with Network Rail. This is a flexible, part-time opportunity starting as a 6-week contract with the potential to transition into a permanent role. Key Responsibilities Lead and manage rail infrastructure or construction projects from inception through to completion Ensure compliance with CDM Regulations (2015) Coordinate and manage Principal Designer and Principal Contractor responsibilities Identify, assess, and mitigate health & safety risks Manage project timelines, budgets, and resources Engage with key stakeholders including clients, contractors, and regulatory bodies Ensure all works comply with rail industry standards and Network Rail processes Support safe project delivery in live rail environments Key Requirements Proven experience as a Project Manager within the rail sector Strong working knowledge of CDM Regulations (2015) Demonstrable experience delivering projects for Network Rail Familiarity with PACE/GRIP or similar rail project frameworks Excellent communication and stakeholder management skills Ability to work effectively in a safety-critical environment Desirable PRINCE2, APM, or equivalent project management qualification NEBOSH or similar health & safety certification Experience across multidisciplinary rail projects (civils, M&E, signalling)

le for the flawless delivery of Engineering work scope, ensuring customer and legislative requirements are met in line with project timescales, cost, quality and safely executed Key Accountabilities 1. Project Planning & Coordination Develop project schedules and milestones Coordinate with design engineers, contractors, and suppliers Review project scope and ensure alignment with client requirements Attend project meetings and provide technical input 2. Technical Oversight Review and validate HVAC designs and drawings Ensure compliance with codes, standards (e.g., Dw144), and specifications Approve equipment selections and submittals Resolve technical issues during design and construction phases 3. Site Execution & Supervision Monitor installation activities for quality and safety Conduct site inspections and verify work against drawings Coordinate commissioning and testing of HVAC systems Ensure timely delivery of materials and equipment 4. Documentation & Reporting Maintain project documentation (RFIs, change orders, progress reports) Prepare handover documents and O&M manuals Track project costs and support budget control Report progress to stakeholders and escalate issues as needed 5. Client & Stakeholder Engagement Communicate with clients to clarify requirements and expectations Provide technical presentations and updates Manage client feedback and ensure satisfaction Support post-installation troubleshooting and warranty issues Experience, Skills & Qualifications • A minimum of HNC/HND in Mechanical Engineering/Building Services Excellent knowledge in design and fabrication/assembly of packaged plant rooms structural, piping, maintainability, transportation etc • Modular design and manufacture • Awareness of industry standards and legislation including CE marking • Customer facing, with high degree of commercial awareness • Understanding of requirements management and configuration and change management • Ideally experienced in HVAC design and design of bespoke mechanical equipment in Nuclear applications • Tendering and delivery through the full project lifecycle

Role Positioning You'll be responsible for managing and delivering either a large, complex project or a number of smaller projects at the same time, making sure both the client and the business are fully satisfied with the outcome. Your involvement could start as early as the tender or negotiation stage and carry right through to delivery on site. You'll take ownership for the scope, programme, quality, and budget, acting as the main point of accountability throughout. The role will see you leading and coordinating multi-disciplinary teams, from engineering and commercial to procurement, construction, and commissioning, to ensure everything comes together successfully. It's about providing clear direction, strong leadership, and sound decision-making at every stage of the project. You'll set the tone for safety, quality, cost control, and programme performance, while also representing the company in senior client and stakeholder meetings, balancing collaboration with protecting our interests. Above all, you'll drive a culture of continuous improvement, encouraging innovation and efficiency across the team to deliver projects in the best possible way. Key Accountabilities Health, Safety, Quality & Compliance Make sure all statutory and company health and safety requirements are followed. Have oversight of QA/QC by making sure ITPs and quality records are in place and maintained. Contract & Commercial Management Administer the contract in line with the company's scope and responsibilities. Protect the company's position during negotiations, site works, and post-contract discussions, keeping proper records throughout. Work with the commercial team to provide timely and accurate information for payments, variations, and final accounts. Monitor project cashflow, invoicing, and subcontractor accounts. Keep tight control on costs and margins. Lead on Early Warnings, Compensation Events, and change control in line with NEC Planning & Controls Own/Manage and drive the programme of works. Keep programmes, schedules, and controls up to date and share them regularly. Track progress against milestones, flag risks or delays, and take action to keep things on track. Provide clear and accurate reporting to management and the client on cost, time, and resources. Procurement & Supply Chain Lead the procurement during tender, negotiation, and delivery stages. Make sure the supply chain is aligned to project goals and performance standards. Risk Management Identify and manage project risks and opportunities as they arise. Put the right mitigation in place and escalate issues where needed to protect the business. Experience, Skills & Qualifications Experience running teams including Engineering/Design, site, including managing subcontractors, different trades, and making sure everything is coordinated. Used to managing electrical subcontractors as well as other subbie packages. Solid experience across HVAC, pipework, and electrics. Comfortable working to tight programmes and milestone-driven delivery. Good knowledge of the heating and ventilation industry, how things are manufactured, and how they go together on site. Hands-on experience working with different forms of contract (ideally NEC). Commercially switched on, understanding the cost and programme impact of decisions. Strong understanding of safe systems of work, ideally backed up with SMSTS/IOSH or similar. Confident feeding into planning tools (P6, MS Project) and digital systems like SharePoint, Dalux, or ProjectWise. Full UK driving licence. Highly Desirable (but not essential) Degree / HND or HNC Membership of a Professional Body

RHL is looking for a Gold Card Electrician for a short-term contract We are currently seeking an experienced Gold Card Electrician for a 3-4 week contract on a wastewater treatment plant project. Role Details: Installation and wiring of control boards General power wiring duties Working within an industrial wastewater environment (please note: conditions can be unpleasant/smelly) Location & Hours: Chichester 8:00am - 4:00pm (8 hours paid) On-site parking available Rate: 29 per hour Requirements: Valid ECS Gold Card Proven experience with control panels and power wiring Ability to work in industrial environments If you're available and meet the above criteria, please get in touch to discuss further.

RHL is looking for a Site Manager (Fit-Out / Rail Experience Preferred) Location: Central London (site-based) Duration: Initial 6-week contract Working Pattern: 2-3 days per week Rate: 350- 375 per day (dependent on experience) About the Role We are seeking an experienced Site Manager to oversee the retrofit of a commercial office space in Central London. While this is a building fit-out project, the client environment is linked to the rail sector, so experience working on Network Rail or similar regulated infrastructure projects is highly desirable. This is a flexible, part-time opportunity starting as a 6-week contract, with potential for extension. Key Responsibilities Oversee day-to-day site operations on an office retrofit / fit-out project Ensure all works are delivered safely, on time, and to required quality standards Maintain full compliance with CDM Regulations (2015) and site H&S protocols Manage subcontractors and coordinate trades on site Monitor progress against programme and report to stakeholders Identify, assess, and mitigate site risks Ensure works comply with both construction and any client-specific (rail-related) standards Support delivery within a safety-critical or highly regulated environment Key Requirements Proven experience as a Site Manager on fit-out, refurbishment, or construction projects Strong knowledge of CDM Regulations (2015) Ability to manage site activities in controlled or regulated environments Strong communication and stakeholder management skills Relevant certifications (e.g. SMSTS, CSCS) Desirable Experience working on Network Rail or similar infrastructure projects Familiarity with rail processes (e.g. PACE/GRIP) Health & safety qualifications such as NEBOSH Experience working in live or operational environments

Air Conditioning Installation & Service Engineer Location Midlands or Newport (with travel and occasional overnight stays required) Salary 38,000 - 47,000 per year (depending on experience) Role Overview We are seeking an experienced Air Conditioning Engineer to carry out a mix of installation, maintenance, and servicing works across commercial sites. This role involves travel and participation in an on-call rota. Key Responsibilities Perform planned preventative maintenance (PPM) and reactive maintenance on air conditioning systems, including split systems, VRV/VRF, and chillers Diagnose faults and carry out repairs to ensure optimal system performance Install air conditioning systems, from split units through to VRF systems Assist with AHU and chiller installations (desirable) Respond to client callouts within agreed SLAs Maintain compliance with health & safety standards and site-specific requirements Liaise with clients and internal teams to ensure smooth service delivery Produce accurate technical and service reports Identify and quote for additional works where required Participate in a 24-hour call-out rota (standby rota applies) Skills & Qualifications NVQ Level 2 or 3 in Refrigeration & Air Conditioning (or equivalent) F-Gas Certification (Category 1 / 2079) Minimum 5+ years' experience in air conditioning installation and service Strong experience working on commercial HVAC systems Good knowledge of building regulations and HVAC standards Familiar with health & safety practices (risk assessments, COSHH, etc.) Full UK Driving Licence Package & Benefits Company vehicle provided 20 days annual leave + bank holidays Overtime paid at time and a half (weekends) On-call rota with 25 per day standby allowance Additional Requirements Willingness to travel for work Flexibility to stay away from home when required Comfortable working across both installation and service environments

2 x Electricians required for a 2 month contract in Aldermaston. Gold ECS required 2391 qualificaion prefered but not essential Work scope includes lighting upgrades and air con system upgrades Role Overview We are seeking an experienced Electrician. The role involves working on a Industrial site, upgrading lighting and air con systems. Key Responsibilities Uprgading Air con systems Upgrading lighting systems Requirements Gold ECS cards Security clearance DV or SC 2391 qulaification preferred but not essential Working Hours Monday - Friday: 08:00 - 16:00 8hrs paid Potential weekend overtime, Saturdays at time and a half and Sundays double time

Experienced Air Conditioning Service Engineer Join an Established and Growing Team An exciting opportunity has arisen for a skilled Air Conditioning Service Engineer to join a well-established business operating across Kent, London, and surrounding areas. This role is ideal for an experienced engineer with strong knowledge of air conditioning systems, capable of carrying out servicing, maintenance, and repair work. You will play a key role in delivering high-quality service and maintaining excellent customer satisfaction. Role & Responsibilities Service, repair, and maintain air conditioning systems, including: Splits Multis VRVs FCUs Work across both residential and commercial sites Diagnose faults and carry out effective repairs Ensure all work is completed to a high standard Occasionally work outside standard hours to support customer requirements Requirements Located within a 15 miles of Dartford / Kent area Full UK driving licence Minimum 8 years' experience in the air conditioning industry Strong organisational skills and attention to detail Good IT skills and ability to manage workload efficiently Proactive, with strong problem-solving ability Customer-focused with a professional approach Flexible, reliable, and trustworthy Qualifications Technical (essential): F-Gas Relevant electrical qualifications City & Guilds (or equivalent) Safe handling certification Health & Safety (desirable): CSCS PASMA IPAF Or similar Package & Benefits Full-time, permanent position Salary: £45,000 - £55,000 (depending on experience) Overtime: Evening and weekend work available Location: Field-based role covering Kent, London, and surrounding areas Working Hours : Monday to Friday, 08:30 - 17:30 Benefits Include: Company van, laptop, credit card, and specialist tools Company uniform provided 28 days annual leave (including bank holidays), with option to purchase additional leave Ongoing training and development, including manufacturer training Regular team and social events Supportive and friendly working environment

Experienced Air Conditioning Installation Engineer Join an Established and Growing Team An exciting opportunity has arisen for a skilled Air Conditioning Installation Engineer to join a well-established business operating across Kent, London, and surrounding areas. This is a pure installation role, focused on project delivery and high-quality system installations. It does not involve servicing or breakdown work. Role & Responsibilities Install air conditioning systems, including: Split systems Multi-split systems VRV / VRF systems FCU systems Carry out first-fix and second-fix installation works Install pipework, pressure test, evacuate, commission, and complete system handovers Install condensate drainage systems and associated electrical connections Work closely with contracts and project teams to deliver installations efficiently Maintain high standards of workmanship, safety, and customer care Requirements Located within 15 miles of Dartford / Kent area Full UK driving licence Minimum 8 years' experience in air conditioning installation Strong organisational skills and attention to detail Ability to read technical drawings and follow specifications Reliable, trustworthy, and able to work independently or as part of a team Qualifications Essential: F-Gas Certification City & Guilds or equivalent HVAC qualifications CSCS card Desirable: IPAF PASMA Or similar access certifications Package & Benefits Full-time, permanent position Salary: £45,000 - £55,000 (depending on experience) Overtime available Working Hours: Monday to Friday, 07:30 - 16:30 Location: Field-based role covering Kent, London, and surrounding areas Benefits Include: Company van, fuel card, tools, laptop, and company credit card Company uniform provided 28 days annual leave (including bank holidays), with option to purchase additional leave Ongoing training and manufacturer-specific development Supportive and friendly working environment Regular company social events

Air Conditioning Technical Coordinator Join an Established and Growing Team An exciting opportunity has arisen for an Air Conditioning Technical Coordinator to join a well-established business operating within the HVAC sector. This role is ideally suited to a former engineer with hands-on experience in air conditioning installation and diagnostics, or someone with a background in technical support within a manufacturer or contractor environment. Role & Responsibilities Prepare and issue quotations for new projects Manage customer communications via email and phone Follow up on quotations to secure new business Order air conditioning units and spare parts Review engineer job reports and advise on follow-up work Produce quotations based on engineer recommendations Provide technical support to office staff when required Assist with preparation of RAMS (training provided if needed) Requirements Located within 20 miles of the Dartford / Kent area Full UK driving licence Minimum 5 years' experience within the air conditioning industry Strong knowledge of air conditioning and ventilation systems Excellent organisational skills and attention to detail Competent in Microsoft Word, Excel, and Outlook Confident, professional, and personable approach Package & Benefits Full-time, permanent position Salary: 35,000 - 45,000 (depending on experience) Overtime: Available during peak periods Location: Office-based role Working Hours: Monday to Friday, 08:30 - 17:30 Benefits Include: Laptop and mobile phone provided 28 days annual leave (including bank holidays), with option to purchase additional leave Ongoing training and professional development Supportive and friendly working environment Regular company social events

Job Title: Sheet Metal Worker Improver Location: Waterlooville Salary: 12.50 per hour Hours: 40 hours per week (Full-time) Job Overview We are seeking a motivated and reliable Sheet Metal Worker Improver to join our growing team in Waterlooville. This is an excellent opportunity for someone with some basic experience or training in sheet metal work who is looking to develop their skills further within a supportive and hands-on environment. Key Responsibilities Assist skilled sheet metal workers in the fabrication, assembly, and installation of metal components Operate basic machinery and hand tools under supervision Read and interpret technical drawings and specifications (training provided where necessary) Measure, cut, and shape metal materials to required dimensions Maintain a clean and safe working environment in line with health and safety regulations Support with material handling, preparation, and general workshop duties Carry out basic quality checks on completed work Requirements Some prior experience or training in sheet metal work, fabrication, or a similar trade (preferred but not essential) Willingness to learn and develop practical skills Good attention to detail and a strong work ethic Ability to follow instructions and work as part of a team Basic understanding of health and safety practices in a workshop environment Reliable and punctual What We Offer Competitive hourly rate of 12.50 Full-time, stable employment (40 hours per week) On-the-job training and development opportunities Supportive team environment Opportunity for progression within the company

Panel Builder / Panel Wirer (BMS & Controls) Location: Fareham Salary: 30,000 - 40,000 Contract Type: Permanent Annual Leave: 20 days We are recruiting for an experienced Panel Wirer to work for our client in Fareham to join their BMS and controls engineering team. Key Responsibilities Building and wiring BMS control panels Working from schematics, wiring diagrams, and GA drawings Terminating components and field devices to industry standards Supporting panel testing and quality checks Working independently and as part of an expanding engineering team Requirements Proven experience as a Panel Wirer / Control Panel Wireman Ability to confidently interpret electrical drawings Strong attention to detail with neat, high-quality workmanship Good understanding of control circuits and DIN-rail components ECS/CSCS card (beneficial but not essential)

Controls Engineer (Trend BMS) Location: London Salary: 55,000 - 65,000 Contract Type: Permanent Annual Leave: 20 days We are recruiting for a trend BMS Engineer - Service, Maintenance and Commissioning for our client. This job is based in London on a permanent basis. Key Responsibilities Service and planned maintenance of Trend BMS systems Commissioning of new and existing systems Supporting system design and control strategies Diagnostics, optimisation, and fault finding Assisting with BMS graphics where required Working independently and as part of a growing engineering team Requirements Proven experience with Trend systems (IQ Vision, SET, etc.) Strong problem-solving and diagnostic skills Ability to work independently and collaboratively Full UK driving licence

Job Title: Sprinkler Site Manager Location: Gartree Pay Rate: Competitive (dependent on experience) Job Type: Full-time / Contract About the Role: We are looking for an experienced Sprinkler Site Manager to oversee the installation and delivery of fire sprinkler systems on a secure project. This role requires strong leadership, technical knowledge, and the ability to manage teams and subcontractors effectively in a controlled environment. Key Responsibilities: Manage day-to-day site operations for sprinkler installation works Supervise and coordinate site teams and subcontractors Ensure all works are completed safely, on time, and to specification Maintain strict compliance with health & safety regulations Liaise with clients, project managers, and other trades on site Monitor progress, quality, and performance of works Ensure materials, labour, and resources are effectively planned and utilised Maintain accurate site records and reports Requirements: Proven experience as a Site Manager within fire protection/sprinkler systems Valid SMSTS (Site Management Safety Training Scheme) certification EL1 Security Clearance (essential) Strong understanding of sprinkler systems and relevant regulations/standards Experience managing subcontractors and site teams Excellent leadership, communication, and organisational skills Desirable: LPCB or equivalent fire protection qualifications First Aid certification Experience working on high-security or government projects What We Offer: Competitive pay rates Opportunity to work on a high-profile, secure project Long-term work potential Professional and supportive working environment

Job Title: Sprinkler Site Manager Location: Bicester Pay Rate: Competitive (dependent on experience) Job Type: Full-time / Contract About the Role: We are looking for an experienced Sprinkler Site Manager to oversee the installation and delivery of fire sprinkler systems on a secure project. This role requires strong leadership, technical knowledge, and the ability to manage teams and subcontractors effectively in a controlled environment. Key Responsibilities: Manage day-to-day site operations for sprinkler installation works Supervise and coordinate site teams and subcontractors Ensure all works are completed safely, on time, and to specification Maintain strict compliance with health & safety regulations Liaise with clients, project managers, and other trades on site Monitor progress, quality, and performance of works Ensure materials, labour, and resources are effectively planned and utilised Maintain accurate site records and reports Requirements: Proven experience as a Site Manager within fire protection/sprinkler systems Valid SMSTS (Site Management Safety Training Scheme) certification EL1 Security Clearance (essential) Strong understanding of sprinkler systems and relevant regulations/standards Experience managing subcontractors and site teams Excellent leadership, communication, and organisational skills Desirable: LPCB or equivalent fire protection qualifications First Aid certification Experience working on high-security or government projects What We Offer: Competitive pay rates Opportunity to work on a high-profile, secure project Long-term work potential Professional and supportive working environment

Job Title: Sprinkler Design Engineer (Remote / Hybrid) Location: Primarily Remote (Initial Site Visit Required) Job Type: Temp to Perm Salary: Competitive (dependent on experience) About the Role: We are seeking a skilled Sprinkler Design Engineer to join our team on a temp-to-perm basis. This is a predominantly home-based role, offering flexibility and autonomy, with an initial requirement to attend site at the start of the project. Following this, the role will transition to mainly remote working. Key Responsibilities: Design fire sprinkler systems in line with relevant standards and regulations Produce detailed drawings and layouts using industry software (e.g., AutoCAD, Revit) Carry out hydraulic calculations and system sizing Review project specifications and ensure compliance Liaise with project managers, site teams, and clients Attend site at project commencement to assess requirements and coordinate works Provide ongoing technical support throughout the project lifecycle Requirements: Proven experience as a Sprinkler Design Engineer Strong knowledge of fire protection systems and relevant standards (e.g., BS EN, LPC rules) Proficiency in design software such as AutoCAD (Revit beneficial) Experience carrying out hydraulic calculations Ability to work independently in a remote setting Strong communication and organisational skills Desirable: LPCB or equivalent fire protection certification Experience working on residential or commercial projects Familiarity with UK building regulations What We Offer: Flexible, primarily home-based working Opportunity to transition into a permanent role Competitive salary/package Supportive and collaborative team environment