4 jobs found

M&E Technician (Electrical Bias) Greater London - Lewisham 48,905 - 4 on 4 off shifts (Days) Brief M&E Technician needed for a large, well-known Facilities Management organisation based in Lewisham who are looking to employ an experienced and well-rounded M&E Technician that takes pride in their work. The successful candidate must have a relevant qualification - NCQ Level 3 / Level 3 diploma and hold a technical certificate, advanced apprenticeship, or older qualifications such as C&G part 2/ part B etc. and have a keen interest in M&E Engineering. If you have commercial experience in a hospital environment that would be a plus! This is very much a hands on technical role requiring strong electrical & mechanical competence and a solid understanding of mechanical building services within a healthcare environment. The postholder will carry out planned and reactive maintenance, fault finding, repairs, and minor installation works on a wide range of hospital engineering systems, ensuring compliance, safety, and continuity of critical services Benefits Salary: 48,905 per annum 24 days' Holiday + Public Holidays Life Cover Employee discount shopping schemes for major brands and retailers Gym membership discounts Cycle to work scheme Holiday purchase scheme 2 corporate social responsibility days per year Broad range of learning opportunities, including professional qualifications, training, and personalised support Attractive Employee Referral Rewards Scheme Access to our growing employee networks What the role entails: Some of the main duties of the M&E Technician will include: Apply relevant trade skills to any allocated jobs as directed by the Manager. Carry out planned and reactive maintenance on electrical systems, including emergency lighting, smoke vents, medical electrical systems (IPS/UPS, bedhead services, alarms), distribution boards, final circuits, and HVAC control components. Support mechanical maintenance activities where required, including AHUs, fan coil units, pumps, valves, and general HVAC plant. Respond promptly to plant breakdowns, ensuring critical hospital services remain operational. Undertake fault finding, testing, inspection, and repairs on electrical systems in accordance with BS 7671 and HTM requirements. Carry out minor installation, refurbishment, and upgrade works across the site. Maintain and repair HVAC systems, pumps, motors, actuators, and associated control equipment. Assist with the maintenance of medical gas alarms, nurse call systems, and other clinical engineering interfaces where required. Prepare plant and equipment for statutory inspections (e.g., pressure vessels, LV systems) and complete remedial works as necessary. Ensure all work is carried out safely, following company policies, risk assessments, safe systems of work, and relevant HTMs. Maintain accurate records of all maintenance activities using the CAFM system. Participate in statutory testing programmes including emergency lighting, fire safety systems, and electrical inspection & testing. To carry out Portable Appliance Testing (PAT) as required Work independently or as part of a team to deliver maintenance and project works across the hospital. Communicate effectively with colleagues, clinical staff, contractors, and other stakeholders. Support the integration of electrical and mechanical maintenance functions to ensure seamless service delivery. What experience you need to be the successful M&E Technician : Experienced and skilled in Electrical maintenance Competent with electrical maintenance related to emergency systems and controls. Able to work independently and as part of a team delivering safe, compliant service in a hospital environment. Comfortable participating in on-call duties and emergency response. Committed to maintaining accurate records and following safe working systems, risk assessments, and company procedures. This really is a fantastic opportunity for a M&E Technician to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Ref: MYAG(phone number removed) Location: Hackney (E8) Hours: Monday to Friday 9am-5pm Pay: £31.54ph paid weekly via umbrella (no CIS/LTD) Duration: Ongoing Contract Duties To support the Client in providing a high quality cyclical, planned and reactive repairs and maintenance service to internal and external elements of occupied and unoccupied properties, public buildings and associated external areas. Carry out to a high standard all aspects of service, repair, maintain and install gas hot water and heating systems and appliances. To carry out a wide range of gas and other associated works in accordance with contract requirements and The Gas Safety (Installation & Use) Regulations 1998. Undertake a broad range of multi-skilled repair activities outside of the basic trade such as minor plumbing, electrical and finishing works to provide a comprehensive repair service. Including but not limited to:- Gas servicing of appliances and gas carcasses in line with the annual Gas Servicing Programme. Experience and knowledge to diagnose faults, repair and maintain gas appliances, central heating & hot water systems and components including traditional and modern boilers, circulation pumps, motorised valves, radiators, alterations to pipe work (gas and water), central heating controls etc. Drain down and recommission systems to carry out repairs. Experience and knowledge to install a modern boiler, gas fire, warm plan, balanced flue wall heater Including wiring controls and power from adjacent spur. Power flush to a central heating system. Carry out the replacement of immersion heaters/elements wired to local spur. Make good to holes in brickwork etc. after the removal/renewal of an appliance. Make good / repair finishes disturbed. All to current legislative standards, performance standards and in accordance with Hackney Housing specifications and procedures. Work at heights from a temporary access e.g. scaffolding, ladders, mobile tower and erect temporary work platforms. Assess works, diagnose faults and decide on the best remedy or rectification. Accurately measure, quantify and list materials requirements.

Commercial Gas Engineer Redditch 50,000 - 55,000 per annum A rapidly growing specialist in temporary HVAC and temperature control solutions, providing emergency and planned heating equipment to commercial and industrial customers across the UK. Due to continued growth, they are looking for an experienced Commercial Gas Engineer to join their engineering team in Redditch, working predominantly with temporary commercial boiler systems. Key Responsibilities: Service, maintain and repair commercial boilers and burners Install, commission and decommission temporary boiler systems Fault find on gas, oil, electrical and heating systems Attend emergency breakdowns across commercial and industrial sites Work with pumps, heat exchangers, pipework and associated HVAC equipment Package: 50,000 - 55,000 per annum Overtime opportunities Company vehicle + Fuel Card Pension scheme Tools and PPE provided Ongoing technical training and career progression What You'll Need: Commercial Gas Safe qualifications - COCN1 or CODNCO1 Relevant commercial appliance modules such as CIGA1, ICPN1 and TPCP1A Experience with commercial boilers and forced-draught burners Strong heating and electrical fault-finding skills Full UK driving licence OFTEC would be advantageous for oil-fired equipment Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.

Job Title - Shift Engineer (Electrical) About the Role: My client is a leading global provider of integrated facilities management and they are recruiting for an Electrical Shift Engineer to join a well-known Data Centre contract, located in Canary Wharf. The engineer will be responsible for proactive and reactive building maintenance and repair services for client contracts. They will be responsible for providing support, preventive maintenance, and repairs on equipment and systems. This is a great opportunity for an engineer looking for career progression, as my client looks to invest and qualify the engineer to act as an appointed Authorized Person (AP) within 6 months from onboarding. Purpose of the Job To assist the maintenance team, ensuring safe and full operation of Hard Services, for one of my clients well known leisure contracts, whilst taking consideration for the clients, staff, visitors & other service provider s needs. To carry out Planned Preventative Maintenance (PPM), Proactive and Reactive works to all Electrical systems in accordance with agreed service levels. Working independently or in a team to complete all maintenance and servicing tasks. The engineer must be able to demonstrate relevant knowledge of plant within a typical commercial environment. Experience with HVAC heating systems, Air Handling Units, Fire alarms and associated equipment, Building management systems, Hot and cold-water systems including pumps and water temperature control would be advantageous. Key Responsibilities Ensure that routine maintenance is carried out to all critical building plant, equipment and systems to meet and exceed expectations, and agreed service level agreements. Respond to Building Management System alarms, and effect emergency repairs as needed. To develop a good working relationship with all members of staff and the various client s staff & Contractors. Complete and return job sheets to allow records to be kept up to date. Ensure all tasks issued are completed in agreed SLA times & if there is a risk this cannot be achieved then seek assistance from Supervisors Ensure a professional image is presented to clients and visitors and ensure excellence in customer service is delivered and promoted at all times. Assist Engineering staff in duties as required. These can include low level fabric tasks such as touch up painting, electrical/mechanical tasks or basic plumbing tasks. Ensure an awareness and compliance to the contractual KPI s/SLA s. To ensure tasks as directed are completed with the appropriate H&S awareness/implementation. Overseeing and monitoring of sub-contractors works whilst they are on site undertaking maintenance Qualifications / Experience Electrical Engineering Certifications from a recognised institution (NVQ / G&Gs). HV Certified / Previously trained Previous FM / Building services experience Previous experience in a similar role Critical experience (Desirable) Knowledge of business-critical services i.e., UPS, Generators and Comms Rooms etc