Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Leeds and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Leeds and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Birmingham surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Birmingham surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements
Newcastle Upon Tyne, Tyne And Wear
Nelson Permanent Placements are recruiting for a Building Services HVAC Engineer to work mobile on live purpose built student accomodation around Newcastle surrounding area and ocassionally Scotland The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC Engineer to work mobile on live purpose built student accomodation around Newcastle surrounding area and ocassionally Scotland The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Nelson Permanent Placements
Bristol, Gloucestershire
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Bristol and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
02/10/2026
Full time
Nelson Permanent Placements are recruiting for a Building Services HVAC engineer to work mobile on live purpose built student accomodation around Bristol and the surrounding area. The role is delivering planned preventive maintenance, reactive repairs and minor works on heating ventilation, air conditioning and refrigeration systems. Key responsibilities Carry out PPM on HVAC plant to SFG20 schedules and manufacturer requirements, including AHUs, MVHR and MEV units, fan coil units, extract and supply fans, split and VRF/VRV air conditioning, air source heat pumps and associated controls. Diagnose and repair reactive faults on HVAC and refrigeration systems within contracted response and rectification times, including electrical and controls faults on HVAC equipment. Undertake F-Gas compliant work including leak checking, recovery, charging and commissioning, and maintain refrigerant logs and records in line with F-Gas regulations. Replace filters, belts, bearings, motors, dampers and other components, and carry out airflow measurement and balancing where required. Interface with BMS and local controls to diagnose faults, adjust setpoints and time schedules, and optimise plant performance and energy use. Support ventilation hygiene and TR19 requirements, and report on condition of ductwork, grilles and plant. Assist with installation, replacement and commissioning of HVAC equipment on small works and projects. Record all work accurately and in real time on the HPS mobile job management / CAFM system, including asset data, readings, photographs, defects and parts used, so that compliance records are audit-ready. Identify and report remedial works, producing clear defect descriptions and, where requested, supporting the preparation of quotations for additional works. Work safely under HPS safe systems of work, including RAMS, permits to work, safe isolation and lock-out/tag-out, and complete dynamic risk assessments on site. Liaise professionally with client site teams, residents and other contractors, recognising that sites are occupied residential buildings and minimising disruption to students. Qualifications and experience: essential NVQ Level 3 (or equivalent) in Refrigeration and Air Conditioning, HVAC or Mechanical Engineering Services. F-Gas Category 1 certification (Regulation 2015/2067 or current UK equivalent). Proven experience maintaining commercial HVAC plant, including AHUs, split/VRF systems and ventilation systems. Competent electrical fault-finding on HVAC equipment, including safe isolation. Full UK driving licence (company van provided). CSCS / ECS / JIB or equivalent skills card (or willingness to obtain). Right to work in the UK and willingness to undergo a DBS check (roles involve working in occupied student residences). Qualifications and experience: desirable Experience of MVHR and MEV systems in residential or PBSA buildings. Heat pump qualifications (e.g. air source heat pump installation and maintenance). BMS experience (e.g. Trend, Siemens, Honeywell) and controls commissioning. Manufacturer training (e.g. Daikin, Mitsubishi Electric, Toshiba, Nuaire). BESA / TR19 ventilation hygiene awareness, 18th Edition, IPAF or PASMA. Previous experience in a multi-site FM or managed services environment. Skills and behaviours Self-motivated and well organised, able to plan your own day across multiple sites with minimal supervision. Strong diagnostic and fault-finding approach, with the confidence to take ownership of a problem through to resolution. Customer-focused, polite and professional in resident-facing environments. Safety-first mindset, with no shortcuts on isolations, permits or documentation. Comfortable with mobile technology and digital job reporting. A team player, willing to share knowledge, support colleagues and mentor apprentices or improvers. What we offer Basic salary: £41,000 to £48,000 per annum, depending on experience and qualifications. Company van and fuel card for business use. Overtime available at enhanced rates, including during the summer turnaround period. Fully funded training and tickets, including refresher courses, manufacturer training and additional qualifications that support your development. Company pension scheme. Uniform, PPE and handheld job management device provided. Genuine career progression within a growing MES division, including routes into supervisory, technical lead and specialist roles. How to Apply: This vacancy is being advertised on behalf of Nelson Permanent Placements Ltd. The services of Nelson Permanent Placements Ltd are that of an Employment Agency. Please be advised that our client can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.
HVAC Engineer Basingstoke and the surrounding areas Salary £44K - £46K + Company van 25 days holiday, plus birthday off, and bank holidays Are you a skilled HVAC Engineer with a background in planned and reactive maintenance? Would you be happy carrying out small remedial works and minor installations? We re working with a growing facilities management company that services both commercial and domestic properties across the Midlands. Due to several new contract wins, they want to expand their team with an experienced HVAC Engineer. As a mobile HVAC Engineer, you'll be covering Birmingham and surrounding areas (including Coventry and Leicester), delivering maintenance across commercial properties, including plant rooms and communal areas. Your responsibilities will include: Planned and reactive maintenance on HVAC plant Fault finding and basic repairs to heating, ventilation, and air conditioning systems Water temperature checks and legionella testing Working on pumps, motors, AHUs, FCUs General plumbing (e.g. TMVs, flushing, like-for-like replacements) What We re Looking For: We re open to various backgrounds, as long as you re confident in the commercial building environment. You might be: A Commercial Plumber A Mechanically or Electrically qualified Engineer A Multi-skilled Maintenance Engineer Essential: Qualification in either Mechanical (HVAC, Gas, Plumbing) or Electrical (Level 2+) Previous experience in commercial building or plant room maintenance For further information on the role and the company, please APPLY NOW or get in touch with Rhymel Henderson for a confidential chat. INDHIGH
23/09/2026
Full time
HVAC Engineer Basingstoke and the surrounding areas Salary £44K - £46K + Company van 25 days holiday, plus birthday off, and bank holidays Are you a skilled HVAC Engineer with a background in planned and reactive maintenance? Would you be happy carrying out small remedial works and minor installations? We re working with a growing facilities management company that services both commercial and domestic properties across the Midlands. Due to several new contract wins, they want to expand their team with an experienced HVAC Engineer. As a mobile HVAC Engineer, you'll be covering Birmingham and surrounding areas (including Coventry and Leicester), delivering maintenance across commercial properties, including plant rooms and communal areas. Your responsibilities will include: Planned and reactive maintenance on HVAC plant Fault finding and basic repairs to heating, ventilation, and air conditioning systems Water temperature checks and legionella testing Working on pumps, motors, AHUs, FCUs General plumbing (e.g. TMVs, flushing, like-for-like replacements) What We re Looking For: We re open to various backgrounds, as long as you re confident in the commercial building environment. You might be: A Commercial Plumber A Mechanically or Electrically qualified Engineer A Multi-skilled Maintenance Engineer Essential: Qualification in either Mechanical (HVAC, Gas, Plumbing) or Electrical (Level 2+) Previous experience in commercial building or plant room maintenance For further information on the role and the company, please APPLY NOW or get in touch with Rhymel Henderson for a confidential chat. INDHIGH
Experienced and professional Commercial Gas Engineer required to work with a leading and highly reputable organisation. My client requires an experienced Commercial Gas Engineer to join their maintenance team, carrying out installation, maintenance and reactive repair works across commercial properties in Coventry. Location: Coventry Pay: 35.00 per hour (Umbrella or CIS) Hours: Full-time Start Date: ASAP Duration: Ongoing Commercial Gas Engineer Carry out installation and maintenance works across heating, ventilation, HVAC, commercial appliances and heat pump systems. Install, modify and maintain associated pipework, components and fittings. Conduct combustion system evaluations to ensure compliance with relevant safety regulations and operational standards. Monitor and evaluate combustion processes, identifying operational issues and recommending appropriate corrective measures. Ensure all gas works comply with relevant health and safety requirements, industry regulations, British Standards and Approved Codes of Practice. Attend reactive repair tasks allocated by planners and complete works within the required timeframes. Carry out fault diagnosis and complete repairs within the relevant trade area. Complete installation, maintenance and remedial works to a high standard. Communicate effectively with customers to establish expectations and ensure works meet their requirements. Liaise with clients throughout works to ensure issues are resolved and customer satisfaction is maintained. Complete all relevant paperwork, documentation and certification accurately. Requirements Level 3 qualification , where possible. 18th Edition , where possible. PASMA or IPAF , where possible. Enhanced DBS required. Strong understanding of gas health and safety requirements, British Standards and relevant Approved Codes of Practice. Experience diagnosing faults and carrying out reactive repairs. Good knowledge of associated commercial pipework, components and fittings. Full and valid UK driving licence. Strong communication and customer service skills. Ability to work independently and complete reactive works within required timescales. Please apply if interested and the consultant looking after this will be in touch! INDPS
22/09/2026
Seasonal
Experienced and professional Commercial Gas Engineer required to work with a leading and highly reputable organisation. My client requires an experienced Commercial Gas Engineer to join their maintenance team, carrying out installation, maintenance and reactive repair works across commercial properties in Coventry. Location: Coventry Pay: 35.00 per hour (Umbrella or CIS) Hours: Full-time Start Date: ASAP Duration: Ongoing Commercial Gas Engineer Carry out installation and maintenance works across heating, ventilation, HVAC, commercial appliances and heat pump systems. Install, modify and maintain associated pipework, components and fittings. Conduct combustion system evaluations to ensure compliance with relevant safety regulations and operational standards. Monitor and evaluate combustion processes, identifying operational issues and recommending appropriate corrective measures. Ensure all gas works comply with relevant health and safety requirements, industry regulations, British Standards and Approved Codes of Practice. Attend reactive repair tasks allocated by planners and complete works within the required timeframes. Carry out fault diagnosis and complete repairs within the relevant trade area. Complete installation, maintenance and remedial works to a high standard. Communicate effectively with customers to establish expectations and ensure works meet their requirements. Liaise with clients throughout works to ensure issues are resolved and customer satisfaction is maintained. Complete all relevant paperwork, documentation and certification accurately. Requirements Level 3 qualification , where possible. 18th Edition , where possible. PASMA or IPAF , where possible. Enhanced DBS required. Strong understanding of gas health and safety requirements, British Standards and relevant Approved Codes of Practice. Experience diagnosing faults and carrying out reactive repairs. Good knowledge of associated commercial pipework, components and fittings. Full and valid UK driving licence. Strong communication and customer service skills. Ability to work independently and complete reactive works within required timescales. Please apply if interested and the consultant looking after this will be in touch! INDPS
Location: Norwich Salary: Up to 42000 About the Role We are currently seeking an experienced Heat Pump Engineer to join our clients growing team based in Norwich. This is an exciting opportunity for a skilled engineer with experience in the servicing and maintenance of Air Source Heat Pumps (ASHP) and Ground Source Heat Pumps (GSHP) across Norfolk. You will be responsible for carrying out planned maintenance, servicing, fault finding, and repairs on a variety of domestic and commercial heat pump systems, ensuring customers receive the highest standard of service. Key Responsibilities Service and maintain ASHP and GSHP systems across Norfolk. Diagnose faults and carry out repairs efficiently. Complete planned preventative maintenance visits. Ensure all work is completed in line with industry standards and company procedures. Provide excellent customer service whilst on-site. Accurately complete service reports and documentation. Requirements NVQ Level 3 in Plumbing and Heating G3 Unvented Hot Water Must Have F GAS BPEC Experience working with Air Source and Ground Source Heat Pumps. Strong fault-finding and diagnostic skills. Full UK Driving Licence. Excellent communication and customer service skills. Package & Benefits Salary up to 42000 Company vehicle provided 25 days annual leave plus Bank Holidays Company pension scheme Ongoing paid training and development opportunities
18/09/2026
Full time
Location: Norwich Salary: Up to 42000 About the Role We are currently seeking an experienced Heat Pump Engineer to join our clients growing team based in Norwich. This is an exciting opportunity for a skilled engineer with experience in the servicing and maintenance of Air Source Heat Pumps (ASHP) and Ground Source Heat Pumps (GSHP) across Norfolk. You will be responsible for carrying out planned maintenance, servicing, fault finding, and repairs on a variety of domestic and commercial heat pump systems, ensuring customers receive the highest standard of service. Key Responsibilities Service and maintain ASHP and GSHP systems across Norfolk. Diagnose faults and carry out repairs efficiently. Complete planned preventative maintenance visits. Ensure all work is completed in line with industry standards and company procedures. Provide excellent customer service whilst on-site. Accurately complete service reports and documentation. Requirements NVQ Level 3 in Plumbing and Heating G3 Unvented Hot Water Must Have F GAS BPEC Experience working with Air Source and Ground Source Heat Pumps. Strong fault-finding and diagnostic skills. Full UK Driving Licence. Excellent communication and customer service skills. Package & Benefits Salary up to 42000 Company vehicle provided 25 days annual leave plus Bank Holidays Company pension scheme Ongoing paid training and development opportunities
Job Title: Commercial Gas Engineer (HVAC) Location: Home Counties South (Oxford / Swindon / Newbury) Contract Type: Permanent Working Hours: 45 Hours Per Week Salary: 48,656.73 Total Salary (Inclusive of Standby Payment), Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for a skilled Commercial Gas Engineer (HVAC) to join our company to work with one of our major UK supermarket clients. The role will involve carrying out planned and reactive maintenance across several retail stores, maintaining, and repairing a range of commercial heating systems and air conditioning units. Additionally, you will undertake regular planned store visits to complete reactive work, PPMs and minor repairs as requested by the customer. Key Responsibilities: Carrying out PPM and reactive maintenance across a number of sites. Service and repair a range of mechanical equipment, e.g. boilers, fans, pumps, AHU's, FCU's. Carry out minor alterations and installations within the individual& s technical competence in accordance with current specifications. Order spares to the laid-down procedures. Identify non-repairable faults in plant and machinery and promptly advise the HVAC supervisor of findings, with recommendations regarding suitable replacement. Qualifications / Experience: Essential SVQ/NVQ Level 3 within Heating/Ventilation/Mechanical / HVAC or Equivalent Qualification. ACS Commercial Gas Qualifications COCN, CIGA, CORT, ICPN, CDGA, TPCP1/1A as a minimum. Desirable but not essential ACS Domestic Gas Qualifications CCN, CENWAT, CPA as a minimum. City and Guilds 2079-1 FGas Category 1. City and Guilds th Edition. The ideal candidate: Flexible to be part of the 24/7 on-call rota every 1:4 weeks. Full driving license. Experience using a PDA system. Have the ability to work at heights, work in confined spaces. Carried out PPM and reactive maintenance within a similar retail environment.
16/09/2026
Full time
Job Title: Commercial Gas Engineer (HVAC) Location: Home Counties South (Oxford / Swindon / Newbury) Contract Type: Permanent Working Hours: 45 Hours Per Week Salary: 48,656.73 Total Salary (Inclusive of Standby Payment), Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for a skilled Commercial Gas Engineer (HVAC) to join our company to work with one of our major UK supermarket clients. The role will involve carrying out planned and reactive maintenance across several retail stores, maintaining, and repairing a range of commercial heating systems and air conditioning units. Additionally, you will undertake regular planned store visits to complete reactive work, PPMs and minor repairs as requested by the customer. Key Responsibilities: Carrying out PPM and reactive maintenance across a number of sites. Service and repair a range of mechanical equipment, e.g. boilers, fans, pumps, AHU's, FCU's. Carry out minor alterations and installations within the individual& s technical competence in accordance with current specifications. Order spares to the laid-down procedures. Identify non-repairable faults in plant and machinery and promptly advise the HVAC supervisor of findings, with recommendations regarding suitable replacement. Qualifications / Experience: Essential SVQ/NVQ Level 3 within Heating/Ventilation/Mechanical / HVAC or Equivalent Qualification. ACS Commercial Gas Qualifications COCN, CIGA, CORT, ICPN, CDGA, TPCP1/1A as a minimum. Desirable but not essential ACS Domestic Gas Qualifications CCN, CENWAT, CPA as a minimum. City and Guilds 2079-1 FGas Category 1. City and Guilds th Edition. The ideal candidate: Flexible to be part of the 24/7 on-call rota every 1:4 weeks. Full driving license. Experience using a PDA system. Have the ability to work at heights, work in confined spaces. Carried out PPM and reactive maintenance within a similar retail environment.
Ref: MYAG(phone number removed) Location: Hackney (E8) Hours: Monday to Friday 9am-5pm Pay: £31.54ph paid weekly via umbrella (no CIS/LTD) Duration: Ongoing Contract Duties To support the Client in providing a high quality cyclical, planned and reactive repairs and maintenance service to internal and external elements of occupied and unoccupied properties, public buildings and associated external areas. Carry out to a high standard all aspects of service, repair, maintain and install gas hot water and heating systems and appliances. To carry out a wide range of gas and other associated works in accordance with contract requirements and The Gas Safety (Installation & Use) Regulations 1998. Undertake a broad range of multi-skilled repair activities outside of the basic trade such as minor plumbing, electrical and finishing works to provide a comprehensive repair service. Including but not limited to:- Gas servicing of appliances and gas carcasses in line with the annual Gas Servicing Programme. Experience and knowledge to diagnose faults, repair and maintain gas appliances, central heating & hot water systems and components including traditional and modern boilers, circulation pumps, motorised valves, radiators, alterations to pipe work (gas and water), central heating controls etc. Drain down and recommission systems to carry out repairs. Experience and knowledge to install a modern boiler, gas fire, warm plan, balanced flue wall heater Including wiring controls and power from adjacent spur. Power flush to a central heating system. Carry out the replacement of immersion heaters/elements wired to local spur. Make good to holes in brickwork etc. after the removal/renewal of an appliance. Make good / repair finishes disturbed. All to current legislative standards, performance standards and in accordance with Hackney Housing specifications and procedures. Work at heights from a temporary access e.g. scaffolding, ladders, mobile tower and erect temporary work platforms. Assess works, diagnose faults and decide on the best remedy or rectification. Accurately measure, quantify and list materials requirements.
15/09/2026
Contract
Ref: MYAG(phone number removed) Location: Hackney (E8) Hours: Monday to Friday 9am-5pm Pay: £31.54ph paid weekly via umbrella (no CIS/LTD) Duration: Ongoing Contract Duties To support the Client in providing a high quality cyclical, planned and reactive repairs and maintenance service to internal and external elements of occupied and unoccupied properties, public buildings and associated external areas. Carry out to a high standard all aspects of service, repair, maintain and install gas hot water and heating systems and appliances. To carry out a wide range of gas and other associated works in accordance with contract requirements and The Gas Safety (Installation & Use) Regulations 1998. Undertake a broad range of multi-skilled repair activities outside of the basic trade such as minor plumbing, electrical and finishing works to provide a comprehensive repair service. Including but not limited to:- Gas servicing of appliances and gas carcasses in line with the annual Gas Servicing Programme. Experience and knowledge to diagnose faults, repair and maintain gas appliances, central heating & hot water systems and components including traditional and modern boilers, circulation pumps, motorised valves, radiators, alterations to pipe work (gas and water), central heating controls etc. Drain down and recommission systems to carry out repairs. Experience and knowledge to install a modern boiler, gas fire, warm plan, balanced flue wall heater Including wiring controls and power from adjacent spur. Power flush to a central heating system. Carry out the replacement of immersion heaters/elements wired to local spur. Make good to holes in brickwork etc. after the removal/renewal of an appliance. Make good / repair finishes disturbed. All to current legislative standards, performance standards and in accordance with Hackney Housing specifications and procedures. Work at heights from a temporary access e.g. scaffolding, ladders, mobile tower and erect temporary work platforms. Assess works, diagnose faults and decide on the best remedy or rectification. Accurately measure, quantify and list materials requirements.
Domestic Gas Engineer Social Housing Location: West London & Surrounding Areas Salary: £42,000 £48,000 per annum, depending on experience Contract: Full-Time, Permanent Hours: 8:00am 5:00pm, Monday Friday Company Van & Fuel Card Provided Call-Out Rota: 1 in 3 We are currently recruiting for an experienced Domestic Gas Engineer to join an established social housing and maintenance team, carrying out gas servicing, repairs and maintenance across occupied social housing properties throughout London and surrounding areas . This is an excellent opportunity for a qualified Gas Engineer looking for a secure, permanent position with a consistent workload, company vehicle and additional earning potential through call-outs. The Role You will be responsible for completing a range of domestic gas, heating and associated plumbing works , ensuring all work is carried out safely, efficiently and in line with relevant standards. Duties will include: Servicing and maintaining domestic boilers and heating systems Carrying out CP12 / Landlord Gas Safety Checks Diagnosing and repairing boiler and heating faults Fault finding on heating controls, pumps, valves and associated components Carrying out boiler replacements and heating installations Completing heating upgrades and remedial works Investigating heating and hot-water breakdowns Carrying out associated plumbing repairs Identifying unsafe appliances and following the correct procedures Completing accurate job records, certification and photographs Using PDA/job-management systems Working professionally within occupied properties Providing excellent customer service to residents Maintaining clean, safe and tidy working areas Working Hours & Call-Out Standard Hours: 8:00am 5:00pm, Monday Friday Call-Out Rota: 1 in 3 Call-Out Payments: £120 standby £30 per call-out The call-out rota provides an excellent opportunity to increase your overall earnings. Coverage Area The role will cover properties across: SW EC W SE Post Codes You will be working across a variety of social housing properties throughout London and surrounding areas . Requirements Current Gas Safe registration Relevant domestic ACS qualifications, including CCN1 and CENWAT HTR1, CKR1 and MET1 where applicable Proven domestic gas servicing, repair and fault-finding experience Experience with boiler replacements and central-heating systems Experience completing CP12/Landlord Gas Safety Records G3 Unvented Hot Water qualification desirable Full UK driving licence No more than 6 points on licence speeding points only All own tools required Strong communication and customer service skills Professional approach when working in residents' homes What's On Offer? £42,000 £48,000 per annum Company van Fuel card 8am 5pm Monday Friday 1-in-3 call-out rota £120 standby payment £30 per call-out Pension scheme Uniform and PPE provided Overtime opportunities Training and development Long-term permanent employment Consistent workload within the social housing sector Excellent opportunity for career progression Social Housing Experience Previous experience working within social housing, housing associations, local authorities, council properties or domestic maintenance is highly desirable. You will be working directly in residents' homes, so a professional approach and strong customer service skills are essential. If you're an experienced Domestic Gas Engineer looking for a permanent position with a strong salary, company van, fuel card and additional earning potential through call-outs, apply today to find out more.
14/09/2026
Full time
Domestic Gas Engineer Social Housing Location: West London & Surrounding Areas Salary: £42,000 £48,000 per annum, depending on experience Contract: Full-Time, Permanent Hours: 8:00am 5:00pm, Monday Friday Company Van & Fuel Card Provided Call-Out Rota: 1 in 3 We are currently recruiting for an experienced Domestic Gas Engineer to join an established social housing and maintenance team, carrying out gas servicing, repairs and maintenance across occupied social housing properties throughout London and surrounding areas . This is an excellent opportunity for a qualified Gas Engineer looking for a secure, permanent position with a consistent workload, company vehicle and additional earning potential through call-outs. The Role You will be responsible for completing a range of domestic gas, heating and associated plumbing works , ensuring all work is carried out safely, efficiently and in line with relevant standards. Duties will include: Servicing and maintaining domestic boilers and heating systems Carrying out CP12 / Landlord Gas Safety Checks Diagnosing and repairing boiler and heating faults Fault finding on heating controls, pumps, valves and associated components Carrying out boiler replacements and heating installations Completing heating upgrades and remedial works Investigating heating and hot-water breakdowns Carrying out associated plumbing repairs Identifying unsafe appliances and following the correct procedures Completing accurate job records, certification and photographs Using PDA/job-management systems Working professionally within occupied properties Providing excellent customer service to residents Maintaining clean, safe and tidy working areas Working Hours & Call-Out Standard Hours: 8:00am 5:00pm, Monday Friday Call-Out Rota: 1 in 3 Call-Out Payments: £120 standby £30 per call-out The call-out rota provides an excellent opportunity to increase your overall earnings. Coverage Area The role will cover properties across: SW EC W SE Post Codes You will be working across a variety of social housing properties throughout London and surrounding areas . Requirements Current Gas Safe registration Relevant domestic ACS qualifications, including CCN1 and CENWAT HTR1, CKR1 and MET1 where applicable Proven domestic gas servicing, repair and fault-finding experience Experience with boiler replacements and central-heating systems Experience completing CP12/Landlord Gas Safety Records G3 Unvented Hot Water qualification desirable Full UK driving licence No more than 6 points on licence speeding points only All own tools required Strong communication and customer service skills Professional approach when working in residents' homes What's On Offer? £42,000 £48,000 per annum Company van Fuel card 8am 5pm Monday Friday 1-in-3 call-out rota £120 standby payment £30 per call-out Pension scheme Uniform and PPE provided Overtime opportunities Training and development Long-term permanent employment Consistent workload within the social housing sector Excellent opportunity for career progression Social Housing Experience Previous experience working within social housing, housing associations, local authorities, council properties or domestic maintenance is highly desirable. You will be working directly in residents' homes, so a professional approach and strong customer service skills are essential. If you're an experienced Domestic Gas Engineer looking for a permanent position with a strong salary, company van, fuel card and additional earning potential through call-outs, apply today to find out more.
Commercial Gas Engineer Redditch 50,000 - 55,000 per annum A rapidly growing specialist in temporary HVAC and temperature control solutions, providing emergency and planned heating equipment to commercial and industrial customers across the UK. Due to continued growth, they are looking for an experienced Commercial Gas Engineer to join their engineering team in Redditch, working predominantly with temporary commercial boiler systems. Key Responsibilities: Service, maintain and repair commercial boilers and burners Install, commission and decommission temporary boiler systems Fault find on gas, oil, electrical and heating systems Attend emergency breakdowns across commercial and industrial sites Work with pumps, heat exchangers, pipework and associated HVAC equipment Package: 50,000 - 55,000 per annum Overtime opportunities Company vehicle + Fuel Card Pension scheme Tools and PPE provided Ongoing technical training and career progression What You'll Need: Commercial Gas Safe qualifications - COCN1 or CODNCO1 Relevant commercial appliance modules such as CIGA1, ICPN1 and TPCP1A Experience with commercial boilers and forced-draught burners Strong heating and electrical fault-finding skills Full UK driving licence OFTEC would be advantageous for oil-fired equipment Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
11/09/2026
Full time
Commercial Gas Engineer Redditch 50,000 - 55,000 per annum A rapidly growing specialist in temporary HVAC and temperature control solutions, providing emergency and planned heating equipment to commercial and industrial customers across the UK. Due to continued growth, they are looking for an experienced Commercial Gas Engineer to join their engineering team in Redditch, working predominantly with temporary commercial boiler systems. Key Responsibilities: Service, maintain and repair commercial boilers and burners Install, commission and decommission temporary boiler systems Fault find on gas, oil, electrical and heating systems Attend emergency breakdowns across commercial and industrial sites Work with pumps, heat exchangers, pipework and associated HVAC equipment Package: 50,000 - 55,000 per annum Overtime opportunities Company vehicle + Fuel Card Pension scheme Tools and PPE provided Ongoing technical training and career progression What You'll Need: Commercial Gas Safe qualifications - COCN1 or CODNCO1 Relevant commercial appliance modules such as CIGA1, ICPN1 and TPCP1A Experience with commercial boilers and forced-draught burners Strong heating and electrical fault-finding skills Full UK driving licence OFTEC would be advantageous for oil-fired equipment Interested in hearing more? Call Peter Caulfield on (phone number removed) or Email (url removed) WR HVAC M&E are the recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC M&E is acting as an Employment Agency in relation to this vacancy.
Location: East Anglia Salary: £45,000 - £55,000 Job Type: Full-Time, Permanent An established building services and maintenance contractor is seeking an experienced Commercial Gas Engineer to join its growing team, covering sites across East Anglia. This is an excellent opportunity for a skilled engineer with commercial gas experience and a good understanding of domestic heating systems to join a well-established business offering long-term stability, varied work, and career progression. The Role You will be responsible for carrying out planned preventative maintenance, servicing, fault-finding, installations, and reactive repairs on a range of commercial and domestic heating and hot water systems. The role is primarily focused on commercial gas works; however, experience working on domestic heating systems is also required due to the varied nature of the contracts. Key Responsibilities Service, maintain, and repair commercial gas appliances and heating systems Carry out planned preventative maintenance (PPM) and reactive maintenance Diagnose and repair faults on commercial and domestic heating systems Install and commission boilers, plant equipment, and associated pipework Perform gas safety inspections, tightness testing, and combustion analysis Maintain hot water systems, pumps, valves, and associated mechanical equipment Complete job reports and certification using a tablet-based system Participate in the on-call rota as required Requirements Proven experience as a Commercial Gas Engineer Experience working on domestic heating systems Strong fault-finding and diagnostic skills Commercial Gas qualifications (essential) Full UK Driving Licence Excellent communication and customer service skills Ability to work independently and manage workload effectively Due to the nature of some contracts, applicants must be eligible to undergo security screening and pass relevant background checks. Package £45,000 - £55,000 basic salary depending on how many hours are done Company vehicle and fuel card Company uniform and PPE provided IPAD + Company phone provided 24 days annual leave plus bank holidays Company pension scheme Ongoing training and development opportunities If you are interested, please apply today or get in touch for more information.
02/09/2026
Full time
Location: East Anglia Salary: £45,000 - £55,000 Job Type: Full-Time, Permanent An established building services and maintenance contractor is seeking an experienced Commercial Gas Engineer to join its growing team, covering sites across East Anglia. This is an excellent opportunity for a skilled engineer with commercial gas experience and a good understanding of domestic heating systems to join a well-established business offering long-term stability, varied work, and career progression. The Role You will be responsible for carrying out planned preventative maintenance, servicing, fault-finding, installations, and reactive repairs on a range of commercial and domestic heating and hot water systems. The role is primarily focused on commercial gas works; however, experience working on domestic heating systems is also required due to the varied nature of the contracts. Key Responsibilities Service, maintain, and repair commercial gas appliances and heating systems Carry out planned preventative maintenance (PPM) and reactive maintenance Diagnose and repair faults on commercial and domestic heating systems Install and commission boilers, plant equipment, and associated pipework Perform gas safety inspections, tightness testing, and combustion analysis Maintain hot water systems, pumps, valves, and associated mechanical equipment Complete job reports and certification using a tablet-based system Participate in the on-call rota as required Requirements Proven experience as a Commercial Gas Engineer Experience working on domestic heating systems Strong fault-finding and diagnostic skills Commercial Gas qualifications (essential) Full UK Driving Licence Excellent communication and customer service skills Ability to work independently and manage workload effectively Due to the nature of some contracts, applicants must be eligible to undergo security screening and pass relevant background checks. Package £45,000 - £55,000 basic salary depending on how many hours are done Company vehicle and fuel card Company uniform and PPE provided IPAD + Company phone provided 24 days annual leave plus bank holidays Company pension scheme Ongoing training and development opportunities If you are interested, please apply today or get in touch for more information.
