33 jobs found

Senior Overhead Line Design Engineer / Senior OHL Design Engineer UK Remote / Hybrid Transmission & Distribution Projects Salary: £dependent on experience + allowances + benefits Location: Hybrid / flexible working available in the UK Type: Full-time Senior Overhead Line Design Engineer (kV) ARCA Resourcing is partnering with a fast-growing specialist engineering consultancy operating across the UK high-voltage energy sector. This is a senior-level opportunity to take technical ownership of overhead line (OHL) design projects across 132kV-400kV transmission and distribution networks, while playing a key role in mentoring and developing junior engineers. If you re experienced in National Grid or DNO environments and want more influence over technical standards, project delivery and team development, this is worth a conversation. The Opportunity You ll lead the delivery of detailed OHL design packages across transmission and distribution schemes - ensuring safety, compliance, and technical excellence throughout. This role blends: Hands-on technical delivery Design governance and QA ownership Team leadership and mentoring Client and project interface You ll be joining a consultancy that is expanding its high-voltage design capability and investing in building a technically strong, scalable team. What You ll Be Doing Technical Design & Delivery Lead detailed OHL design (route & profile design, sag & tension, conductor selection, clearance analysis) Produce and review line schedules, plan & profile drawings, foundation layouts and technical reports Ensure compliance with ESQCR, CDM, National Grid and relevant BS/EN/IEC standards Contribute to design reviews, risk assessments and project planning Support tenders with technical input and design estimates Governance & Quality Maintain robust check/approve workflows Drive high standards in modelling, calculations and documentation Contribute to continuous improvement in tools and processes Leadership Line manage and mentor Junior Designers Support onboarding and technical training (PLS-CADD / PLS-Tower) Contribute to PDPs, competency assessments and succession planning Promote a collaborative, technically rigorous culture What We re Looking For: Essential: Degree or HNC/HND in Electrical, Civil, Mechanical Engineering (or similar) 7 10+ years experience in overhead line design (132kV 400kV) Strong working knowledge of OHL structures, mechanical loading and clearance requirements Experience producing and reviewing full design packages Proficiency in PLS-CADD, PLS-Tower or equivalent software Desirable: Experience working on National Grid or UK DNO projects Chartered Engineer status (or working towards) Experience mentoring or line managing engineers Why This Role Stands Out Genuine technical leadership position Exposure to major UK transmission infrastructure projects Opportunity to shape design standards and processes Hybrid flexibility across multiple UK offices Clear pathway toward Principal / Technical Authority level Apply Now If you are an experienced OHL Design Engineer ready to step into a senior, technically influential role, we would love to hear from you. Apply today through ARCA Resourcing. Please click the link to apply for immediate consideration!

Junior CDM Advisor West Midlands (Birmingham) base / hybrid / UK Wide coverage c 35k- 40k + benefits Our SMAS (SSIP) accredited client specialise in the provision of Construction Health & Safety and design risk management Consultancy advice to some of the biggest names in the UK, and as a result of continued success and an ongoing planned program of strategic expansion, are now seeking to recruit an articulate, enthusiastic and highly self-motivated Junior CDM Advisor to complement their established and successful CDM team providing Principal Designer (CDM) and Client CDM assurance services under the CDM 2015 Regulations. Based in Birmingham with flexibility for home working, the successful Junior CDM Advisor will be responsible for supporting specialist health, safety and construction design risk management consultancy services to clients across the country, conducting site visits and inspections, developing risk management strategies, preparing CDM documentation, and liaising with clients to ensure compliance and safety standards are met. You will be tasked with providing support and services to an established existing client base throughout the UK across all phases of the design and construction lifecycle on a range of challenging projects, and will demonstrate the ability to support multiple projects and develop an understanding of key hazards typical to building and engineering projects in this sector, and will be comfortable in working both autonomously and as part of a wider team in an often pressurised environment. Demonstrating excellent written and verbal communication skills at all levels and able to work effectively with both internal and external project stakeholders to ensure Health and Safety issues are properly addressed and managed throughout the project lifecycle, you will be comfortable in liaising at all levels with blue chip organisations and developing future work with these high level relationships whilst providing attractive fee proposals and agreeing legal documentation on behalf of the client. The Junior CDM Advisor role necessitates an understanding of design and construction processes and the ability to communicate effectively, and essentially you will possess an appreciation of the legal requirements of the CDM 2015 Regulations, and you will be required to make Clients aware of their duties, collate Pre Construction Information and identify how any information gaps will be resolved in a timely manner to ensure sufficient consideration of health and safety issues and carry out H&S specific design reviews throughout the design and construction phases of a project. To be considered for this varied and challenging role it is envisaged that the successful candidate will be qualified to degree level (or equivalent) in a construction design risk management related discipline and be professionally qualified with (or currently studying) an additional Health and Safety qualification (e.g. NEBOSH Construction Certificate, IOSH, appropriate Membership of APS or ICE H&S Register). Additionally you will ideally possess at least 3 years previous commercial experience gained in a commercial design or construction health and safety environment. This is an exceptional opportunity for a suitably qualified individual to progress their career in a friendly, professional and expanding H&S consultancy environment specialising in CDM2015 assurance on projects across the UK. Contact the Project Team at Premier Technical Recruitment on (phone number removed) or email your cv in the strictest confidence to (url removed) for further details.

Job Title Principal Designer (Assistant) Job in Glasgow Location Glasgow, Scotland Salary 35,000 - 45,000 Employment Type Full-time, Permanent Job Overview Principal Designer (Assistant) Job in Glasgow for a construction or design professional looking to build a specialist career in CDM and Health & Safety. This role supports the delivery of Principal Designer duties across a varied portfolio of construction projects, working alongside experienced CDM professionals. The position is suited to candidates with around 2-3 years of experience within architecture, architectural technology, or construction who want to develop deeper knowledge of CDM 2015 regulations and safe design principles. Projects span multiple sectors within the built environment. The role begins office-based to support training and mentoring, before moving to hybrid working following probation. Role & Responsibilities Support delivery of Principal Designer duties across construction projects Assist with CDM 2015 compliance across project design stages Prepare design risk registers and Health & Safety documentation Coordinate with architects, consultants and project teams Monitor design risk management throughout project lifecycle Skills & Experience Required 2-3 years experience within architecture, construction or consultancy Knowledge of CDM 2015 and UK Health & Safety legislation Exposure to live construction or design-stage project environments Strong coordination and communication across multidisciplinary teams Interest in developing a specialist CDM or safety career Salary & Benefits Salary 35,000 - 45,000 depending on experience 23 days annual leave plus bank holidays and Christmas closure Hybrid working available after successful probation period Structured CPD with support for APS, IOSH or NEBOSH Pension scheme with employer contribution Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we will do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they have successfully completed the probation period. See website for full terms and conditions.

Job Title Assistant Principal Designer Job in Edinburgh Location Edinburgh, Scotland Salary 35,000 - 45,000 Employment Type Permanent Job Overview Assistant Principal Designer Job in Edinburgh for a candidate looking to develop a specialist career in CDM and Health & Safety within the construction sector. This role supports the delivery of Principal Designer duties across a range of UK construction projects while building experience in CDM 2015 compliance, risk management and project coordination. Suitable for someone with 2 to 3 years' experience in architecture, architectural technology or construction consultancy who wants to transition into a dedicated CDM and Health & Safety career. The position begins office-based for training before moving to hybrid working following probation. Role & Responsibilities Support Principal Designer duties across construction projects Assist with CDM 2015 compliance throughout project stages Coordinate with design teams on safe design principles Prepare risk registers, reports and project documentation Support collaboration between design, delivery and project teams Skills & Experience Required 2 to 3 years construction or design industry experience Knowledge of CDM 2015 and Health & Safety legislation Architecture, architectural technology or construction background Strong communication within multidisciplinary project teams Interest in long-term CDM and Health & Safety career Salary & Benefits 35,000 - 45,000 depending on experience 23 days annual leave plus bank holidays Pension with 3% employer contribution Hybrid working after successful probation Structured CPD and CDM training support Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we will do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they have successfully completed the probation period. See website for full terms and conditions.

Job Overview Senior CDM Consultant role in South East London within a multidisciplinary consultancy environment. Suited to an experienced Principal Designer or CDM Advisor delivering across residential, education, commercial, and blue light sectors. The role covers RIBA stages 1-6, combining project leadership, client engagement, and commercial input, with a clear pathway into team management. Role & Responsibilities Deliver CDM and Principal Designer services across sectors Lead projects through RIBA stages 1-6 Conduct site inspections, audits, and compliance reviews Manage client relationships and project communication Support fees, bids, and resource planning You will work closely with senior leadership to maintain delivery standards and strengthen team capability. The role includes business development support and preparation for future line management responsibility. Skills & Experience Required Experience as CDM Consultant or Principal Designer Strong knowledge of CDM regulations and risk management Experience leading projects from inception to completion Ability to produce and review H&S documentation Relevant qualifications (NEBOSH, IOSH, APS or similar) You will demonstrate commercial awareness, confident communication, and a proactive approach to leadership. A clear motivation to progress into team management is essential. Salary & Benefits 60,000 + 5,000 car allowance. Clear progression into management within 12 months. Hybrid working with regular office attendance. Professional development, paid fees, and enhanced benefits package. About Hunter Dunning Hunter Dunning is a specialist property and built environment recruitment consultancy established in 2004, focused on quality and long-term partnerships in the UK and Ireland property and construction market. We specialise in full lifecycle property recruitment, covering architecture, interior design, surveying, land and planning, fire safety and wider construction roles. Apply Section If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. All applications are handled in strict confidence. Referral Section Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. See website for full terms & conditions.

Our client, a successful architectural practice, with over 50 years of history and a number of offices across the UK are seeking a talented CDM Principal Designer to join their expanding office in Leicester. They have a determination to provide a first-class service, which has generated client relationships across both the private and public sectors. Our client is currently going through planned expansion and under the direction of their ambitious and forward-thinking leadership, the studio consequently has an extremely busy pipeline of work. Our client has an extensive portfolio so the successful CDM Principal Designer will gain exposure to a variety of sectors such as Industrial, Transport, Healthcare, Office, Mixed Use + Retail, Residential, Education and Leisure. Our client's culture is supportive and flexible, with staff well-being at their core, which is evident in their generous compensation and benefits package offered. This is a fantastic opportunity for a CDM Principal Designer with a client that is caring about employees and clients, maintaining long lasting relationships in both areas. They are an award-winning creative team, applying technical expertise and commercial realism to effectively resolve complex issues and produce well-designed, innovative, and deliverable buildings. CDM Principal Designer Salary & Benefits Competitive Salary ( 40,000 - 45,000 DOE) Support with accreditations Hybrid working Profit related bonus Pension Life insurance Health insurance 34 days holiday pa (inc bank holidays) Progression opportunities Training, support and development - regularly scheduled reviews with your manager Other company benefits to be discussed at interview stage CDM Principal Designer Job Overview Act as the Principal Designer in accordance with CDM 2015 regulations. Plan, manage, monitor, and coordinate health and safety during the pre-construction phase. Identify, eliminate, or control foreseeable risks through design risk management. Coordinate with clients, designers, and contractors to ensure compliance with statutory requirements Preparation of Pre-Construction Information Ensure designers comply with their duties under CDM 2015 Facilitate design risk review meetings and workshops Liaise with the Principal Contractor to support effective risk management. Ensure the Health and Safety File is prepared, reviewed, and handed over to the client upon project completion. Provide advice to clients on their duties under CDM regulations. Maintain up-to-date knowledge of health and safety legislation and best practices. CDM Principal Designer Job Requirements Minimum 5 years' experience in a CDM / Health & Safety / Design role within the construction industry. Strong working knowledge of the Construction (Design and Management) Regulations 2015. NEBOSH Construction Certificate (or equivalent health & safety qualification). Strong understanding of construction design processes and risk mitigation principles. Proactive problem-solving ability. Excellent knowledge of construction health & safety legislation. Strong communication and stakeholder management skills. Excellent report writing and documentation skills. Experience acting as Principal Designer on medium to large-scale projects. Experience in delivering CDM advisory services Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

An employee-owned and family-feel consultancy CDM Consultancy are growing their team and looking for a Senior CDM Principal Designer. You will work remote and hybrid, as you will be offered full auutonomy to manage your work and schedule. This CDM specialist consultancy have a great reputation and take compliance extremely seriously, which allows for a lot of repeat business being won from their clients. You will receive a profit share bonus and car allowance, on top of you basic salary. They have paid their CDM Principal Designers a bonus every year since becoming employe owned. The Senior CDM Principal Designer role As you carry out the role of Principal Designer, you will offer clients and design teams advisory service on Design Risks. Attend sites to spot potential risk, as well as gathering Pre-Construction Information (PCI), collate/review Construction Phase Plans (CPP) and manage the H&S file. The Senior CDM Principal Designer will have Minimum of 5 years within CDM Principal Design (essential) NEBOSH Construction (essential) Membership with IOSH and APS (essential) Technical qualification/degree (e.g. Architecture, Building Surveying, Engineering etc.) (preferred) In Return? Up to 70,000 Profit share bonus Car Allowance Extremely good career progression Full professional development and training support Annual Leave plus Bank Holidays and Christmas Pension scheme Support with achieving chartership Collaborative and progressive working environment Contact George Cassidy at Brandon James on (phone number removed). Ref: CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / Building Control / CertIOSH / GradIOSH / CMIOSH / APS / IMaPS / AaPS / CMaPS / CDM Consultant / CDM Advisor / H&S / Design Safety / Architecture / MIIRSM

Project Manager This position is a result of significant increase and project wins in the client's mechanical team. Mainly to service a major long standing client's M&E project works. The Project Manager will assist the Mechanical Department management team in mentoring and upskilling the wider team, retaining and improving existing customer relations. The role involves commercial responsibility as well as operational delivery, client relationship and high-quality project execution with a key focus to quality of install. The role will require close collaboration with numerous stakeholders throughout the project lifecycle, including but not limited to the following: designers both internal and external, architects, GML estimating department, key account leads, project commercial teams both in house and client side, sub-contractors, manufacturers and specialist suppliers, client agents, commissioning teams and high-profile customers. The candidate will be a key contributor from conception, through the design stages, managing the delivery and ensuring that each project is suitably resourced and closed out in a professional manner, to the highest of standards. Key Responsibilities: A keen eye for detail and a continuous drive to deliver quality work. Lead by example, promote the highest of standards with regards to HSEQ best practice, ensuring compliance with company standards, policies, ISO accreditations and legislative requirements in all instances. Confident and effective communication, ability to chair meetings, driving outcomes, ensuring the production of accurate records of discussions, actions and deadlines. Exposure to tenders, liaison with designers, estimating and commercial teams. As noted above, we have separate teams within the business to handle tendering & commercial enquiries, however as a client representative, you will be the owner of tenders to ensure they are delivered on time and to the standard expected. Ability to fully understand the client requirement, technical specifications, drawings and project requirement holistically. Good understanding of design and project risks. Identify, manage and escalate risks where necessary. Mitigate risks with sound deployment of sub-contracts and allocation of CDP s (Contractors Design Portion). Be able to contribute and manage against the sequence of works for the project programme. Ability to drive the project programme, ensuring key milestones are maintained. Ability to foresee potential points of failure and react accordingly. Prepare and present regular progress reports including programme drop lines to project stakeholders. Understanding the importance of the development and submission of RFI s, TQ s, RFI s & Tech Sub s and driving close out of items raised. Ability to make sound business decisions under pressure. A logical and lateral thinker with the ability to problem solve. Effective communicator, driven, focused, tenacious and conscientious. Excellent time management, ability to delegate, prioritise key tasks and workload when working to strict deadlines. Good understanding of project governance and the requirement for procedural conformity. Commercially astute, sound awareness of the contract terms ensuring adherence, ability to highlight risks, manage variations, delays and EOT requirements, liaising with internal QS s to ensure that the business is commercially protected. Build and maintain good relationships with the customer, framework suppliers and design consultants. Possess the ability to be assertive where required. Able to read the situation and make sound decisions, managing multiple entities both up and downstream, being the conduit to success. Highly adept at the co-ordination of work packages, understanding the interaction of trades and the ability to foresee potential issues. Sound knowledge of CDM Regulations, Principal Designer & Principal Contractor responsibilities under appointment. Willingness to learn and adapt to new ways of working. Highlight key commercial risk and mitigation measures. Upskilling of wider department team. Carry out PDR s for direct reports. Drive the company s vision, values and work ethic, contributing to the growth of the business. o Safety o Quality o Integrity o People

Job Title: CAD / Revit Technician- Building Regulations & Fire Remediation Location: Colchester Salary: 35-50,000 DOE About the company: A specialist planning and Building Regulations consultancy is seeking a CAD / Revit Technician to join its growing team. The company focuses on residential and commercial development, with an expanding portfolio in fa ade remediation and fire compliance projects across the UK. This role offers the opportunity to contribute to large-scale residential and mixed-use schemes, supporting the delivery of fire remediation works while collaborating closely with design, compliance, and project management teams. Benefits Competitive salary ( 35-50,000 depending on experience) Opportunity to work on high-profile remediation projects Career development within a growing consultancy Supportive and collaborative working environment Daily Duties Produce detailed construction drawings and technical details using AutoCAD (Revit experience advantageous) Develop and coordinate fa ade remediation details, including cavity barriers, cladding interfaces, and fire stopping solutions Support the design team in delivering Building Regulations-compliant solutions Assist with the preparation of drawing packages for statutory approval and construction Coordinate with internal teams and external consultants such as architects, fire engineers, and contractors Maintain high standards of drawing quality, accuracy, and consistency Ideal Candidate Strong experience using AutoCAD (Revit advantageous) Proven experience producing construction or technical drawings Good understanding of UK Building Regulations (particularly Part B desirable) Experience or exposure to fa ade remediation and fire compliance (preferred but not essential) Awareness of CDM / Principal Designer responsibilities Understanding of the Building Safety Regulator (desirable) Strong attention to detail and ability to work effectively within a team To apply, please contact KAZ on (phone number removed) OR alternatively, send your updated CV and Portfolio across to (url removed) I hope to hear from you soon!

Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.

An employee-owned and family-feel consultancy within CDM Consultancy are growing their team and looking for a Senior CDM Principal Designer. You will work office. Their clients and projects are all located within half a mile of the office. This CDM specialist consultancy have a great reputation and take compliance extremely seriously, which allows for a lot of repeat business being won from their clients. You will receive a profit share bonus and car allowance, on top of you basic salary. The CDM Principal Designer role As you carry out the role of Principal Designer, you will offer clients and design teams advisory service on Design Risks. Attend sites to spot potential risk, as well as gathering Pre-Construction Information (PCI), collate/review Construction Phase Plans (CPP) and manage the H&S file. The CDM Principal Designer will have Minimum of 5 years within CDM Principal Design (essential) NEBOSH Construction (essential) Membership with IOSH and APS (essential) Technical qualification/degree (e.g. Architecture, Building Surveying, Engineering etc.) (preferred) In Return? Up to 70,000 Profit share bonus Car Allowance Extremely good career progression Full professional development and training support Annual Leave plus Bank Holidays and Christmas Pension scheme Support with achieving chartership Collaborative and progressive working environment Contact George Cassidy at Brandon James on (phone number removed). Ref: CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / Building Control / CertIOSH / GradIOSH / CMIOSH / APS / IMaPS / AaPS / CMaPS / CDM Consultant / CDM Advisor / H&S / Design Safety / Architecture / MIIRSM

Join a small specialist Health & Safety team as part of a wider construction group working as Principal Designer and CDM Advisor on a range of complex buildings and rail projects in London and the South. This is a remote based role joining an established team offering good training and development opportunities. Due to expansion plans in the team our client is looking for a Health & Safety Consultant with CDM experience to join the team. This is a consultancy role, but one where work life balance is valued, you will be working on a small volume of projects for a great business that puts team culture first. Experience working as a CDM Advisor is essential in this role, and possessing a NEBOSH Construction along with any design or construction experience/qualifications would be beneficial. This is an opportunity to work in an interesting business where you will have time and training to deliver complex PD services on prestigious projects. For more information on this role call Dominic Jacques on (phone number removed).

Senior Project Manager  Working Pattern:  Full Time Posted Date:  19 Mar 2024   Salary:£45,585 to £48,350 with progression to £54,395 per annum with potential for market factor supplement Newcastle University is a great place to work, with excellent  benefits . We have a generous holiday package; plus the opportunity to buy more, great pension schemes and a number of health and wellbeing initiatives to support you. Closing Date: 07 April 2024   Based within the Estates & Facilities Service, we have an exciting opportunity for an experienced construction professional to join our Capital Team of Project Managers.   The Capital Team are an in-house service that is responsible for the design, development and management of capital development projects across the University. Our 50-acre Newcastle City Centre Campus is the hub of teaching, research and collaboration and we have a strong pipeline of projects that seek to respond to a number of key strategic priorities, including; a net zero carbon target of 2030 and ensuring our facilities enable high quality education and world class research. This role will play a significant part in providing a campus for the future. We are looking for someone with demonstrable experience managing building projects in the construction industry, this could be as a contractor, consultant or in a client-side role. You will oversee the supervision of the University’s major capital developments, as well as occasional long-term maintenance and improvement projects within the service. Project values range broadly and therefore your workload will be both varied and interesting. The Senior Project Managers operate within a team of four, reporting to a Team Leader – James Adshead. There are five other team members across the Capital Team including Project Engineers / Project Surveyors and a Soft Landings Manager. Your role is based at our Newcastle city centre campus, with some occasional travel to offsite locations across the North East. One of our most recent projects is the redevelopment of the Stephenson Building. Information on the project can be found in this link: The Stephenson Building - Who we Are - Newcastle University (ncl.ac.uk) Please reach out to James Adshead, Capital and Planning Manager on  james.adshead@ncl.ac.uk  to arrange a call to chat about this opportunity. Please note: The University has funding available for any candidates who do not currently hold a valid CSCS card (Construction Safety Certification Scheme). *Interviews will be held 23rd April 2024 Key Accountabilities To lead capital projects through the RIBA Plan of Works schedule, ensuring project objectives are delivered throughout Work in liaison across other teams within Estates and Facilities such as the Sustainability, Planning, Improvement and Maintenance Teams as well as key stakeholders across the University to develop a client brief and determine the optimum project and costs sufficient to allow the business case to be demonstrated and the project to be approved by the University Executive Be responsible for the development of comprehensive programmes incorporating all key activities the through the design and construction process through to completion, commissioning and occupation (including soft landings) Take financial responsibility for the project to ensure that timely payments are made and recorded and that expenditure is monitored regularly and reported to ensure that any threats / risks to completion of the project within budget are addressed as necessary Be responsible for the overall management and associated reporting of projects. To include project progress, governance, finances, quality, risk management, health and safety and other key aspects of the project across University Committees and meetings including Steering groups, project meetings and other forums as required Lead the procurement and appointment of architectural and engineering design teams, other specialist consultants, contractors and suppliers to oversee the development of the design and construction to ensure it fulfils the needs and expectations of stakeholders as well as functional, programme and cost requirements Work in partnership with colleagues to specify, procure and deliver feasibility reports, options appraisals and impact assessments including external funding bids Set up and manage third party relationships as appropriate with external stakeholders, tenants and landlords, local authorities, statutory authorities, funders, utility services and other agencies etc Take responsibility for the client role as defined under the CDM Regulations and consult with other sections of the Estates and Facilities and the Principal Designer to ensure the organisation meets its requirements under all Health and Safety legislation Implement and promote the use of Building Information Modelling throughout the design and build process and ensure that the electronic drawings and manuals are integrated into the existing Estates and Facilities data systems. Liaise with the BIM Manager Direct and work alongside external consultant teams and University colleagues, including the Estates and Facilities Project Surveyor / Project Engineer, throughout the design and construction process and monitor and report progress during the project, to ensure the project is on programme and within budget Liaise with client representatives and adjacent occupants to advise on the potential implications and disruption caused by the building programme and to implement and co-ordinate any actions to minimise disturbance Contribute to the Post Occupancy Evaluation of completed projects between 1 and 2 years after Practical Completion. Work alongside the Estates and Facilities CDM / Soft Landings Manager Undertake other duties as and when required by the Capital Manager   The Person Knowledge, Skills and Experience Proven track record of managing projects in the construction industry, ensuring compliance with design brief and contractual obligations with deadlines, changing priorities, quality requirements, budget and stakeholder management Working knowledge of construction contracts and the roles and responsibilities within those Solid understanding and experience of construction methods and technologies An up-to-date knowledge of public procurement regulations Up to date knowledge of statutory requirements, legislation & contract law relating to building projects including Health & Safety Proficient in the reading of drawings and technical specifications Ability to organise time to manage conflicting priorities within a demanding workload Experience of working in a team and stakeholders to support positive outcomes Excellent written and verbal communication skills Good attention to detail Good IT skills with working knowledge of software packages, such as Microsoft Office packages   Attributes and Behaviour Can demonstrate an ability to think flexibly, have sound judgement, use initiative, be proactive and adopt an active approach to problem solving Comfortable working alongside senior colleagues to shape the project direction and programme including the negotiation skills and the ability to influence others Ability to working on own initiative and as part of a team Collaborative worker who builds on relationships with clients, colleagues, consultants, and contractors with excellent interpersonal and relationship building skills Proven leadership skills and ability to promote “ownership” of decisions regarding colleagues and financial resources limited by the overall budget   Qualifications Education to degree level, either in a relevant construction discipline, or with substantial equivalent professional experience in an estate development role Desirable Chartered member of an appropriate professional body     Newcastle University is a global University where everyone is treated with dignity and respect.  As a University of Sanctuary, we aim to provide a welcoming place of safety for all, offering opportunities to people fleeing violence and persecution.   We are committed to being a fully inclusive university which actively recruits, supports and retains colleagues from all sectors of society.  We value diversity as well as celebrate, support and thrive on the contributions of all of our employees and the communities they represent.  We are proud to be an equal opportunities employer and encourage applications from individuals who can complement our existing teams, we believe that success is built on having teams whose backgrounds and experiences reflect the diversity of our university and student population.   At Newcastle University we hold a silver  Athena Swan  award in recognition of our good employment practices for the advancement of gender equality.  We also hold a  Race Equality Charter  Bronze award in recognition of our work towards tackling race inequality in higher education REC.  We are a  Disability Confident  employer and will offer an interview to disabled applicants who meet the essential criteria for the role as part of the offer and interview scheme.   In addition, we are a member of the Euraxess initiative supporting researchers in Europe.  Requisition ID: 26846  

Senior Associate – Health and Safety / CDM Consultant | Bromley / Hybrid | £65-75K + benefits We are looking for someone to lead a small team delivering Construction Safety services to a range of clients across residential, education and MoD projects. You will be responsible for delivering the role of Principal Designer and CDM Advisor, undertaking site safety inspections and providing professional advice and guidance to ensure compliance with CDM 2015. The ideal candidate will have a strong background in the construction safety consultancy sector, with good commercial awareness, business development and team leadership skills. * NEBOSH Construction Certificate (minimum) * TechIOSH + * IMaPS or CMaPS status * Excellent communication skills This is a hybrid role with around 3 days per week based from Bromley, covering client sites across London and the south east. Salary range is £65-75K (including car allowance) + benefits and would suit someone looking to take a step up from a Senior / Principal Consultant role. Want to find out more? Simply apply for the role and I’ll call you back to discuss – all applications will be treated in strict confidence. Bryan & Armstrong Ltd is a specialist Health & Safety recruiter, supplying Health & Safety professionals on an interim and permanent basis across the following disciplines: Health & Safety, Health, Safety & Environment, SHEQ, CDM, Fire, Environmental, Quality Management and Health, Safety, Environment & Quality Systems

An ambitious, values led Health & Safety consultancy, trail-blazing a more human approach to Health and Safety practice. Free from the dictatorial, top down, more traditional approach, this consultancy is looking for a progressive lead consultant whose skills and ideologies resonate with their culture. If you have been looking to exchange your seasoned experience in large scale, high risk, specialist construction H&S – for an unparalleled, collaborative, autonomous, career opportunity – this role’s for you. Top reasons to work for this client: Basic salary to £60k (+ option for car allowance) Home based with rewarding mix of circa 3 days per week visiting sites in and around London / North M25. Connect with the Team once a month at London HQ Flexible hours, excellent work life balance with autonomy over working schedule Be part of a team where people really do come first 25 days holiday + your Birthday (increasing with length of service) Paid charity days, 2 professional membership subscriptions Employer Pension contributions, laptop, training and paid travelcard Core responsibilities will typically include: Nominated Account Manager for a select number of Client Accounts. Engage, develop, and maintain relationships. Deliver wide range of consultancy services with a focus on high-risk activities. Comprehensive Strategic H&S and a/c management support for designated clients. Conduct incident investigation service and be the primary key contact. Understand the requirements of Principal Designer (PD) / Principal Contractor (PC). Complete work deliverables to satisfy CDM 2015 Regulations (role appropriate). Maximise and identify new opportunities, particularly with designated accounts. Building and maintaining, strong and long-lasting customer relationships. Quality audit, check and suggest changes to ensure quality standards are upheld. Expected Qualifications, Skills & Experience: Demonstrable experience in an H&S role in a Construction related setting. Hold a NEBOSH / NCRQ Diploma. Ability to deliver PD / PC related services on smaller-scale design and build projects. GradIOSH / MIIRSM membership, or qualifications/experience to promptly attain. Excellent communication skills with a pragmatic approach to risk management. Genuine desire to learn, continuously improve, broaden, and be challenged. Desire to inspire, motivate and support others and share your knowledge. A keen eye for detail; authoring professional technical reports to a high standard. A good listener, taking on board what our clients need and the ability to translate this into practical advice and solutions

An ambitious, values led Health & Safety consultancy, trail-blazing a more human approach to Health and Safety practice. Free from the dictatorial, top down, more traditional approach, this consultancy is looking for a progressive lead consultant whose skills and ideologies resonate with their culture. If you have been looking to exchange your seasoned experience in large scale, high risk, specialist construction H&S – for an unparalleled, collaborative, autonomous, career opportunity – this role’s for you. Top reasons to work for this client: Basic salary to £60k (+ option for car allowance) Home based with rewarding mix of circa 3 days per week visiting sites in and around London / North M25. Connect with the Team once a month at London HQ Flexible hours, excellent work life balance with autonomy over working schedule Be part of a team where people really do come first 25 days holiday + your Birthday (increasing with length of service) Paid charity days, 2 professional membership subscriptions Employer Pension contributions, laptop, training and paid travelcard Core responsibilities will typically include: Nominated Account Manager for a select number of Client Accounts. Engage, develop, and maintain relationships. Deliver wide range of consultancy services with a focus on high-risk activities. Comprehensive Strategic H&S and a/c management support for designated clients. Conduct incident investigation service and be the primary key contact. Understand the requirements of Principal Designer (PD) / Principal Contractor (PC). Complete work deliverables to satisfy CDM 2015 Regulations (role appropriate). Maximise and identify new opportunities, particularly with designated accounts. Building and maintaining, strong and long-lasting customer relationships. Quality audit, check and suggest changes to ensure quality standards are upheld. Expected Qualifications, Skills & Experience: Demonstrable experience in an H&S role in a Construction related setting. Hold a NEBOSH / NCRQ Diploma. Ability to deliver PD / PC related services on smaller-scale design and build projects. GradIOSH / MIIRSM membership, or qualifications/experience to promptly attain. Excellent communication skills with a pragmatic approach to risk management. Genuine desire to learn, continuously improve, broaden, and be challenged. Desire to inspire, motivate and support others and share your knowledge. A keen eye for detail; authoring professional technical reports to a high standard. A good listener, taking on board what our clients need and the ability to translate this into practical advice and solutions

Construction Safety Consultant | Winchester | £40-50K + car allowance As a specialist Health & Safety Consultant / Principal Designer based at our multi-disciplinary consultancy office in Winchester. You will provide clients with strategic advice on developing and implementing their health and safety policy along with structured and comprehensive risk management systems at any stage of a construction project or infrastructure project. Working as part of a small growing team you will be involved in construction projects that cover sectors such as Hotels, Housing, Offices, Retail, Health and Education. Key responsibilities * Undertaking the role of Principle Designer * Responsibility for managing your own projects * Providing CDM advice and support to Client Teams, advising clearly of their CDM Duties and assisting with development of CDM strategy for projects * Attending and co-ordinating Design & Project Meetings as required throughout projects * Visiting project sites prior to construction to carry out initial risk appraisals and during construction to review arrangements (as required) * Preparing, co-ordinating and distributing relevant pre-construction Health & Safety Information to other design & project team members, using company format where required * Issuing F10 notifications * Reviewing Construction Phase Plans, demolition & lifting plans etc * Undertaking site H&S reviews and producing reports for Clients * Collation and production of Health & Safety Files To be considered for this role, you must hold: * Some practical experience in providing CDM services * Technical Membership with IOSH or above * Membership with the APS would be beneficial * NEBOSH Construction or General Certificate is essential * Good understanding of risk management and hazard identification * A thorough understanding of the design and construction process * Excellent organisation, communication and time management skills The successful candidate will be a confident communicator at all levels and will be able to build and maintain successful Client relationships. You must also be IT proficient with excellent presentation and time management skills

Vistry Partnerships - Our Story: Delivering homes and revitalising communities is at the heart of what we do. Working with local authorities, housing associations and investors, we create lasting partnerships and deliver vibrant, sustainable places to live. As a leading regeneration specialist, we have offices throughout England and a strong national footprint. With over 100 sites currently in production, we are recognised as an innovative and collaborative industry leader, focused on creating as many new homes of all tenures as possible. In a Nutshell: As our Development Manager you will be reporting into the Senior Development Manager. You will manage development from brief preparation through to planning approval, development of concept through the detailed design process, bringing the development to the market, delivery and handover of project in consultation with procurement and construction departments What we would like from you: Key Responsibilities - Lead the internal project team to ensure project can be delivered effectively in alignment with business unit objectives. Develop, maintain, monitor and report against, accurate and detailed development appraisals and development cost plan, programmes and budgets against design development. Coordination of Development Agreement administration with project delivery team Identify suitable candidates, shortlist, and in liaison with Planning Manager and Technical Manager coordinate competitive procurement and appointment of external consultants for pre-development and planning. Ensure the design of the development is progressively reviewed by internal design team at appropriate stages and final authorisation from Head of Technical. Working with the Development Estimator, ensure costs and risks are accurately monitored and reported through development process. Monitor financial planning of development with Finance/Commercial Manager. Working with the Technical Manager, identify and monitor site and technical constraints and in consultation with external consultant team resolve within robust and viable technical strategy. Working with the Planning Manager, identify and monitor Town Planning risks and opportunities with JV partners and consultants. Consult with Sales and Marketing Manager to review sales and marketing strategy, tenant requirements, residential sales options. Co-ordinate project report for review on monthly basis. This report should encapsulate all relevant information from respective functions, Land, Planning, Technical, and Sales and Marketing. Monitor Project during detailed design, procurement and construction phases to maintain aspirations and delivery in line with programme. Ensure commercial tenants' requirements are met and the interfaces are managed properly. Detailed understanding of CDM duties for Client, Principal Designer and Designers. You will also cover various responsibilities to do with Land, Scheme Appraisals, Design and Planning, Technical and Project Delivery.Competencies - Degree in Development / Construction related discipline or other qualifications/experience to demonstrate an equivalent level of skill 5 years experience in development management role Experience in planning and delivery of 100+ unit / high density projects Estate regeneration working with a range of stakeholders Demonstrable project management skills Leading a project team of internal and external members Working flexibly and autonomously, whilst maintaining business objectives Communication skills, written and verbal, for a wide range of stakeholdersThe Good Stuff: Vistry Partnerships is a fast paced and exciting place to work. We offer our employees multiple opportunities to learn, develop and nurture successful careers with us. Some of our key benefits include… Competitive salary and package 28 days holiday plus the option to buy or sell up to 5 days Private Healthcare Sharesave scheme Company car, car allowance or travel allowance (role and geographic dependant) Support with a professional membershipVistry Group brings together the energy and talents of Bovis Homes, Linden Homes and Vistry Partnerships (formerly Galliford Try Partnerships). With developments from Northumberland to Cornwall and Cheshire to Norfolk, Vistry Group will be delivering around 12,000 homes a year across the country, this makes us one of the top five housebuilders in the UK. We are a real powerhouse of a business with a focus on delivering for our people, our customers, our clients, our contractors and our shareholders