Make a difference in Cornwall! - Long-term and flexible opportunity available for a Technical Surveyor Your new company As a Technical Surveyor, you will join a Cornwall-based employer who undertake critical work across the county, providing a service for over 550,000 residents, and delivering a suite of services across every cross-section of the community. Your new role You will join a busy residential aids & adaptations team who undertake their work across the Cornwall region. As a Technical Surveyor working within this team, you will visit properties which have been approved to receive grant funding, before undertaking an initial inspection and creating a specification detailing the extent of the alteration work required. As part of this process, you will also use CAD to create basic drawings to highlight the work that is needing to be undertaken, before presenting these to a contractor and project managing the completion of the work, ensuring works are delivered to the required standard, with health & safety and CDM in mind, and within budget. Projects could include new ramps, wet rooms, new doors or small extensions. What you'll need to succeed This could be a fantastic opportunity for you if you have experience working as a Technical Surveyor, CAD Technician, Building Surveyor or a similar Project Management role in the past. You must satisfy the below criteria: Have a base in Cornwall and be able to drive. Have some basic CAD skills which can be used in a practical setting. Have delivered small refurbishment, alteration or improvement projects previously, ideally within a residential setting. What you'll get in return In return, you will join a supportive and secure team who are working across Cornwall to improve the lives of thousands of tenants living across the region. You'll receive a competitive hourly rate (calculated dependent on experience and qualifications), and will be paid on a weekly basis across the duration of a long-term contract. You can expect contract extensions or progression into a permanent role. What you need to do now Our client has opted to undertake a shortlist and interview process immediately, therefore please click 'apply now' if you are interested in being considered for this position. #
Mar 22, 2024
Seasonal
Make a difference in Cornwall! - Long-term and flexible opportunity available for a Technical Surveyor Your new company As a Technical Surveyor, you will join a Cornwall-based employer who undertake critical work across the county, providing a service for over 550,000 residents, and delivering a suite of services across every cross-section of the community. Your new role You will join a busy residential aids & adaptations team who undertake their work across the Cornwall region. As a Technical Surveyor working within this team, you will visit properties which have been approved to receive grant funding, before undertaking an initial inspection and creating a specification detailing the extent of the alteration work required. As part of this process, you will also use CAD to create basic drawings to highlight the work that is needing to be undertaken, before presenting these to a contractor and project managing the completion of the work, ensuring works are delivered to the required standard, with health & safety and CDM in mind, and within budget. Projects could include new ramps, wet rooms, new doors or small extensions. What you'll need to succeed This could be a fantastic opportunity for you if you have experience working as a Technical Surveyor, CAD Technician, Building Surveyor or a similar Project Management role in the past. You must satisfy the below criteria: Have a base in Cornwall and be able to drive. Have some basic CAD skills which can be used in a practical setting. Have delivered small refurbishment, alteration or improvement projects previously, ideally within a residential setting. What you'll get in return In return, you will join a supportive and secure team who are working across Cornwall to improve the lives of thousands of tenants living across the region. You'll receive a competitive hourly rate (calculated dependent on experience and qualifications), and will be paid on a weekly basis across the duration of a long-term contract. You can expect contract extensions or progression into a permanent role. What you need to do now Our client has opted to undertake a shortlist and interview process immediately, therefore please click 'apply now' if you are interested in being considered for this position. #
Job Title: Architectural Technician Location : Blackpool Salary: Competitive Job Type: Permanent, Full Time About us: The Glasdon Group is a market leader in the design and supply of a wide range of environmental and safety products, including street furniture, recycling products, road safety equipment, winter safety products, water safety products, shelters and modular buildings/housings About the role: To meet our growth objectives, we are currently recruiting for an Architectural Technician to advance the development of new products within our Modular Buildings and Housings Division The successful candidates will need to demonstrate a methodical approach to design and problem solving that can be applied to finding innovative turnkey / modular solutions using responsibly sourced and recycled materials throughout If you have a genuine desire to succeed and wish to join a progressive company, with excellent opportunities and benefits, then this role provides an excellent opportunity for meaningful long-term career development Duties and Responsibilities: Advise, support and lead on the design and development of new Modular Buildings and Housings systems Sketching and drawing ideas and concepts Develop your ideas from concept to production Liaison with senior management and wide range of stakeholders Client visitations and market research for contemporary off-site construction methods and modular solutions Problem solving and innovation Reviewing and preparation of design drawings Project Management About you: Hold a relevant Degree, HNC or HND level qualification Ideally 2-5 years post-qualification experience Proficient with IT Systems, Solidworks (preferred), AutoCAD, Autodesk REVIT and BIM Be methodical, self-motivated and pro-active towards design and problem solving An effective collaborator and team player Knowledge of UK Building Regulations, planning legislation, construction detailing, sustainability carbon neutral and net-zero initiatives Keen eye for detail Passionate for aesthetics and architectural sectors and off-site construction methods Hold a valid UK driving licence Benefits: A competitive commencing salary 33 days annual leave Flexible annual leave Comprehensive training programmes Company Final Salary Pension scheme after a minimum of two years' service Life insurance after a minimum of two years' service Pension through NEST within 3 months of start date Cycle to Work Scheme (subject to minimum criteria) Flexitime / Hybrid Working (subject to minimum criteria) Long Service Awards Private health care scheme after a minimum of one years' service Cashback plan for dental care, eyecare, prescriptions, physiotherapy and more Subsidised on-site Café / social space Team building Paid charity days and company events Relocation Support Please click the APPLY button to submit your CV for this role Candidates with experience of: Architectural Design Consultant, Architectural Technician, Architect, Architect Assistant, Trainee Architect, Building Surveyor Modular Buildings & Housings, Modular Design, Product Design, Manufacturing, Building Regulations, Solidworks, AutoCAD, Autodesk REVIT, BIM, Architecture, Drawing, Degree, HNC, HND, Planning, Project Management, Construction, Sustainable Materials, Sourcing, Communication, Innovation and Recycling may also be considered for the role The Glasdon Group Limited is an equal opportunities employer
Mar 19, 2024
Full time
Job Title: Architectural Technician Location : Blackpool Salary: Competitive Job Type: Permanent, Full Time About us: The Glasdon Group is a market leader in the design and supply of a wide range of environmental and safety products, including street furniture, recycling products, road safety equipment, winter safety products, water safety products, shelters and modular buildings/housings About the role: To meet our growth objectives, we are currently recruiting for an Architectural Technician to advance the development of new products within our Modular Buildings and Housings Division The successful candidates will need to demonstrate a methodical approach to design and problem solving that can be applied to finding innovative turnkey / modular solutions using responsibly sourced and recycled materials throughout If you have a genuine desire to succeed and wish to join a progressive company, with excellent opportunities and benefits, then this role provides an excellent opportunity for meaningful long-term career development Duties and Responsibilities: Advise, support and lead on the design and development of new Modular Buildings and Housings systems Sketching and drawing ideas and concepts Develop your ideas from concept to production Liaison with senior management and wide range of stakeholders Client visitations and market research for contemporary off-site construction methods and modular solutions Problem solving and innovation Reviewing and preparation of design drawings Project Management About you: Hold a relevant Degree, HNC or HND level qualification Ideally 2-5 years post-qualification experience Proficient with IT Systems, Solidworks (preferred), AutoCAD, Autodesk REVIT and BIM Be methodical, self-motivated and pro-active towards design and problem solving An effective collaborator and team player Knowledge of UK Building Regulations, planning legislation, construction detailing, sustainability carbon neutral and net-zero initiatives Keen eye for detail Passionate for aesthetics and architectural sectors and off-site construction methods Hold a valid UK driving licence Benefits: A competitive commencing salary 33 days annual leave Flexible annual leave Comprehensive training programmes Company Final Salary Pension scheme after a minimum of two years' service Life insurance after a minimum of two years' service Pension through NEST within 3 months of start date Cycle to Work Scheme (subject to minimum criteria) Flexitime / Hybrid Working (subject to minimum criteria) Long Service Awards Private health care scheme after a minimum of one years' service Cashback plan for dental care, eyecare, prescriptions, physiotherapy and more Subsidised on-site Café / social space Team building Paid charity days and company events Relocation Support Please click the APPLY button to submit your CV for this role Candidates with experience of: Architectural Design Consultant, Architectural Technician, Architect, Architect Assistant, Trainee Architect, Building Surveyor Modular Buildings & Housings, Modular Design, Product Design, Manufacturing, Building Regulations, Solidworks, AutoCAD, Autodesk REVIT, BIM, Architecture, Drawing, Degree, HNC, HND, Planning, Project Management, Construction, Sustainable Materials, Sourcing, Communication, Innovation and Recycling may also be considered for the role The Glasdon Group Limited is an equal opportunities employer
Chartered Building Surveyor
Sevenoaks, Kent
About
An amazing opportunity to join a large well-known real estate company as a building surveyor in their rural division. This company are a highly motivated team of Building Surveyors, Architects and Technicians covering the Southeast of England, with the role requiring you to take ownership of key projects, operating independently and as part of a team. They pride themselves on their culture of trust, respect, teamwork, collaboration, and motivation.
Information on the role
* Contract administration
* Building surveys and reports
* Schedule and plan preventative maintenance programmes
* Advise on appointing contractors, designers, and procurement routes
* Preparing scheme designs, specifications, and schedules of dilapidations
* Advise on conservation of historic buildings
* Ensuring health and safety regulations are adhered to
What we’d like from you
* MRICS, CIOB, CIAT or equivalent qualification
* Knowledge of CDM2015
* Proficient in AutoCAD, Revit, and ArchiCAD desirable but not essential
* Strong written and spoken communication skills
* Ability to build and maintain client relationships
* Knowledge of health and safety and building regulations
* Cost management skills
* Friendly and approachable
* Full Driving License
What’s in it for you
* Company pension
* 25 days holiday + bank
* Competitive salary
* Share Scheme
* Referral bonus
* Paid Professional Development
If this opportunity sounds like something of interest, please email Oliver (@) huntermasonconsulting .com
Feb 03, 2023
Permanent
Chartered Building Surveyor
Sevenoaks, Kent
About
An amazing opportunity to join a large well-known real estate company as a building surveyor in their rural division. This company are a highly motivated team of Building Surveyors, Architects and Technicians covering the Southeast of England, with the role requiring you to take ownership of key projects, operating independently and as part of a team. They pride themselves on their culture of trust, respect, teamwork, collaboration, and motivation.
Information on the role
* Contract administration
* Building surveys and reports
* Schedule and plan preventative maintenance programmes
* Advise on appointing contractors, designers, and procurement routes
* Preparing scheme designs, specifications, and schedules of dilapidations
* Advise on conservation of historic buildings
* Ensuring health and safety regulations are adhered to
What we’d like from you
* MRICS, CIOB, CIAT or equivalent qualification
* Knowledge of CDM2015
* Proficient in AutoCAD, Revit, and ArchiCAD desirable but not essential
* Strong written and spoken communication skills
* Ability to build and maintain client relationships
* Knowledge of health and safety and building regulations
* Cost management skills
* Friendly and approachable
* Full Driving License
What’s in it for you
* Company pension
* 25 days holiday + bank
* Competitive salary
* Share Scheme
* Referral bonus
* Paid Professional Development
If this opportunity sounds like something of interest, please email Oliver (@) huntermasonconsulting .com
Construction Jobs
Grimsby, North East Lincolnshire
Prosper Recruitment are working in partnership with Tier 1 Contractor are looking to employ a confident and motivated Architectural Technician to work at their North East Lincolnshire Contract location as a member of the Technical Design Team, who deliver commercial property new build and refurbishment schemes. This vacancy is in the Facilities Management side of the business partnering with local councils where some of their specialisms include: Transport, Road Safety, Traffic Regulations, Sustainable Transport Planning, Street Lighting & Traffic Signals, Highways Inspections, Bridge Inspections, Drainage & Flooding and Environmental.
The successful candidate will be responsible to the Head of Technical Services and assist with specification, Design Detailing, and support and management of property construction projects with the support of other team members.
Responsibilities:
To provide design and technical support to building construction projects. Design of projects through site visits and the development of specifications, and detail design drawings using Auto CAD/2D & ideally Revit 3D packages.
To provide technical advice and guidance on building construction projects.
To develop specifications and any other technical information to contribute to the delivery and procurement of projects.
To prepare planning application and building regulation packs of information to achieve legislative consents.
To ensure all technical information provided is accurate to legislative standards, ACoPs and best practice.
The management and issuing of works orders ensuring compliance with legislative, contractual and workmanship requirements including the briefing and commissioning of all consultants and clients.
To prepare option appraisals, feasibility studies, estimates and technical reports as required, ensuring that value is added to the work of the Technical Design Team through innovation and creativity and advising Clients and Service Managers on options and recommendations.
To manage, direct and monitoring works during the construction phase to include contract administration, variations, project costs and final accounts as appropriate. To assist with evaluating and determining appropriate actions where problems occur and reporting these to the client.
To operate within the policies, systems and business plans of the Technical Design Team and Company
To deliver all works in compliance with the Company’s Health, Environmental & Quality (SHEQ) standards and in line with OHSAS 18001 (Health & Safety), 14001 (Environmental) & ISO 9001 (Quality).
The role supports the deliverable outcomes for the management of a commercial and public property estate and is part of a team of Architects, Engineers and Building Surveyors.
The post holder will be required to work with other property professional teams to provide assistance and guidance for building construction works as a part of the Technical Design Team. The role is a mixture of office and on-site involvement and requires a good communicator who can provide clear instructions to and management of contractors.
The primary role includes the use of CAD and Revit to assist with developing and detailing designs. The successful applicant will be supported and encouraged to develop their skills.
Qualifications or Required Experience:
Experienced in design using CAD and ideally 3D Revit with a background in delivering high quality building construction projects in both the Public and Private sectors. Qualifications should include as a minimum of a NHD or under graduate degree in Architectural Technology or similar, with a minimum 3/5 years’ experience undertaking a similar role.
To meet the requirements and demands of the post, the post holder will need the following:
Experience and qualification in AutoCAD 2D software.
Ideally experience and qualification in AutoDesk Revit software.
IT skills and experience of working with database systems are essential.
Detailed understanding of relevant legislation and regulations is essential.
Numeracy, communication and presentation skills are essential, alongside experience of using Adobe Photoshop.
Experience of undertaking design and specification in refurbishment and new build construction projects.
Experience of preparing and submitting Building Regulations and Planning applications is essential.
Experience of applying CDM Regulations 2015 is essential.
Degree in Building Design/Technology or a related qualification with supported experience is desirable.
Ability to plan, prioritise and organise work to meet client requirements.
Flexible to meet the needs of the service.
Adaptable to change and new ways of working
Sep 15, 2022
Permanent
Prosper Recruitment are working in partnership with Tier 1 Contractor are looking to employ a confident and motivated Architectural Technician to work at their North East Lincolnshire Contract location as a member of the Technical Design Team, who deliver commercial property new build and refurbishment schemes. This vacancy is in the Facilities Management side of the business partnering with local councils where some of their specialisms include: Transport, Road Safety, Traffic Regulations, Sustainable Transport Planning, Street Lighting & Traffic Signals, Highways Inspections, Bridge Inspections, Drainage & Flooding and Environmental.
The successful candidate will be responsible to the Head of Technical Services and assist with specification, Design Detailing, and support and management of property construction projects with the support of other team members.
Responsibilities:
To provide design and technical support to building construction projects. Design of projects through site visits and the development of specifications, and detail design drawings using Auto CAD/2D & ideally Revit 3D packages.
To provide technical advice and guidance on building construction projects.
To develop specifications and any other technical information to contribute to the delivery and procurement of projects.
To prepare planning application and building regulation packs of information to achieve legislative consents.
To ensure all technical information provided is accurate to legislative standards, ACoPs and best practice.
The management and issuing of works orders ensuring compliance with legislative, contractual and workmanship requirements including the briefing and commissioning of all consultants and clients.
To prepare option appraisals, feasibility studies, estimates and technical reports as required, ensuring that value is added to the work of the Technical Design Team through innovation and creativity and advising Clients and Service Managers on options and recommendations.
To manage, direct and monitoring works during the construction phase to include contract administration, variations, project costs and final accounts as appropriate. To assist with evaluating and determining appropriate actions where problems occur and reporting these to the client.
To operate within the policies, systems and business plans of the Technical Design Team and Company
To deliver all works in compliance with the Company’s Health, Environmental & Quality (SHEQ) standards and in line with OHSAS 18001 (Health & Safety), 14001 (Environmental) & ISO 9001 (Quality).
The role supports the deliverable outcomes for the management of a commercial and public property estate and is part of a team of Architects, Engineers and Building Surveyors.
The post holder will be required to work with other property professional teams to provide assistance and guidance for building construction works as a part of the Technical Design Team. The role is a mixture of office and on-site involvement and requires a good communicator who can provide clear instructions to and management of contractors.
The primary role includes the use of CAD and Revit to assist with developing and detailing designs. The successful applicant will be supported and encouraged to develop their skills.
Qualifications or Required Experience:
Experienced in design using CAD and ideally 3D Revit with a background in delivering high quality building construction projects in both the Public and Private sectors. Qualifications should include as a minimum of a NHD or under graduate degree in Architectural Technology or similar, with a minimum 3/5 years’ experience undertaking a similar role.
To meet the requirements and demands of the post, the post holder will need the following:
Experience and qualification in AutoCAD 2D software.
Ideally experience and qualification in AutoDesk Revit software.
IT skills and experience of working with database systems are essential.
Detailed understanding of relevant legislation and regulations is essential.
Numeracy, communication and presentation skills are essential, alongside experience of using Adobe Photoshop.
Experience of undertaking design and specification in refurbishment and new build construction projects.
Experience of preparing and submitting Building Regulations and Planning applications is essential.
Experience of applying CDM Regulations 2015 is essential.
Degree in Building Design/Technology or a related qualification with supported experience is desirable.
Ability to plan, prioritise and organise work to meet client requirements.
Flexible to meet the needs of the service.
Adaptable to change and new ways of working
Construction Jobs
Grimsby, North East Lincolnshire
Prosper Recruitment are working in partnership with Tier 1 Contractor are looking to employ a confident and motivated Architectural Technician to work at their North East Lincolnshire Contract location as a member of the Technical Design Team, who deliver commercial property new build and refurbishment schemes. This vacancy is in the Facilities Management side of the business partnering with local councils where some of their specialisms include: Transport, Road Safety, Traffic Regulations, Sustainable Transport Planning, Street Lighting & Traffic Signals, Highways Inspections, Bridge Inspections, Drainage & Flooding and Environmental.
The successful candidate will be responsible to the Head of Technical Services and assist with specification, Design Detailing, and support and management of property construction projects with the support of other team members.
Responsibilities:
To provide design and technical support to building construction projects. Design of projects through site visits and the development of specifications, and detail design drawings using Auto CAD/2D & ideally Revit 3D packages.
To provide technical advice and guidance on building construction projects.
To develop specifications and any other technical information to contribute to the delivery and procurement of projects.
To prepare planning application and building regulation packs of information to achieve legislative consents.
To ensure all technical information provided is accurate to legislative standards, ACoPs and best practice.
The management and issuing of works orders ensuring compliance with legislative, contractual and workmanship requirements including the briefing and commissioning of all consultants and clients.
To prepare option appraisals, feasibility studies, estimates and technical reports as required, ensuring that value is added to the work of the Technical Design Team through innovation and creativity and advising Clients and Service Managers on options and recommendations.
To manage, direct and monitoring works during the construction phase to include contract administration, variations, project costs and final accounts as appropriate. To assist with evaluating and determining appropriate actions where problems occur and reporting these to the client.
To operate within the policies, systems and business plans of the Technical Design Team and Company
To deliver all works in compliance with the Company’s Health, Environmental & Quality (SHEQ) standards and in line with OHSAS 18001 (Health & Safety), 14001 (Environmental) & ISO 9001 (Quality).
The role supports the deliverable outcomes for the management of a commercial and public property estate and is part of a team of Architects, Engineers and Building Surveyors.
The post holder will be required to work with other property professional teams to provide assistance and guidance for building construction works as a part of the Technical Design Team. The role is a mixture of office and on-site involvement and requires a good communicator who can provide clear instructions to and management of contractors.
The primary role includes the use of CAD and Revit to assist with developing and detailing designs. The successful applicant will be supported and encouraged to develop their skills.
Qualifications or Required Experience:
Experienced in design using CAD and ideally 3D Revit with a background in delivering high quality building construction projects in both the Public and Private sectors. Qualifications should include as a minimum of a NHD or under graduate degree in Architectural Technology or similar, with a minimum 3/5 years’ experience undertaking a similar role.
To meet the requirements and demands of the post, the post holder will need the following:
Experience and qualification in AutoCAD 2D software.
Ideally experience and qualification in AutoDesk Revit software.
IT skills and experience of working with database systems are essential.
Detailed understanding of relevant legislation and regulations is essential.
Numeracy, communication and presentation skills are essential, alongside experience of using Adobe Photoshop.
Experience of undertaking design and specification in refurbishment and new build construction projects.
Experience of preparing and submitting Building Regulations and Planning applications is essential.
Experience of applying CDM Regulations 2015 is essential.
Degree in Building Design/Technology or a related qualification with supported experience is desirable.
Ability to plan, prioritise and organise work to meet client requirements.
Flexible to meet the needs of the service.
Adaptable to change and new ways of working
Sep 15, 2022
Permanent
Prosper Recruitment are working in partnership with Tier 1 Contractor are looking to employ a confident and motivated Architectural Technician to work at their North East Lincolnshire Contract location as a member of the Technical Design Team, who deliver commercial property new build and refurbishment schemes. This vacancy is in the Facilities Management side of the business partnering with local councils where some of their specialisms include: Transport, Road Safety, Traffic Regulations, Sustainable Transport Planning, Street Lighting & Traffic Signals, Highways Inspections, Bridge Inspections, Drainage & Flooding and Environmental.
The successful candidate will be responsible to the Head of Technical Services and assist with specification, Design Detailing, and support and management of property construction projects with the support of other team members.
Responsibilities:
To provide design and technical support to building construction projects. Design of projects through site visits and the development of specifications, and detail design drawings using Auto CAD/2D & ideally Revit 3D packages.
To provide technical advice and guidance on building construction projects.
To develop specifications and any other technical information to contribute to the delivery and procurement of projects.
To prepare planning application and building regulation packs of information to achieve legislative consents.
To ensure all technical information provided is accurate to legislative standards, ACoPs and best practice.
The management and issuing of works orders ensuring compliance with legislative, contractual and workmanship requirements including the briefing and commissioning of all consultants and clients.
To prepare option appraisals, feasibility studies, estimates and technical reports as required, ensuring that value is added to the work of the Technical Design Team through innovation and creativity and advising Clients and Service Managers on options and recommendations.
To manage, direct and monitoring works during the construction phase to include contract administration, variations, project costs and final accounts as appropriate. To assist with evaluating and determining appropriate actions where problems occur and reporting these to the client.
To operate within the policies, systems and business plans of the Technical Design Team and Company
To deliver all works in compliance with the Company’s Health, Environmental & Quality (SHEQ) standards and in line with OHSAS 18001 (Health & Safety), 14001 (Environmental) & ISO 9001 (Quality).
The role supports the deliverable outcomes for the management of a commercial and public property estate and is part of a team of Architects, Engineers and Building Surveyors.
The post holder will be required to work with other property professional teams to provide assistance and guidance for building construction works as a part of the Technical Design Team. The role is a mixture of office and on-site involvement and requires a good communicator who can provide clear instructions to and management of contractors.
The primary role includes the use of CAD and Revit to assist with developing and detailing designs. The successful applicant will be supported and encouraged to develop their skills.
Qualifications or Required Experience:
Experienced in design using CAD and ideally 3D Revit with a background in delivering high quality building construction projects in both the Public and Private sectors. Qualifications should include as a minimum of a NHD or under graduate degree in Architectural Technology or similar, with a minimum 3/5 years’ experience undertaking a similar role.
To meet the requirements and demands of the post, the post holder will need the following:
Experience and qualification in AutoCAD 2D software.
Ideally experience and qualification in AutoDesk Revit software.
IT skills and experience of working with database systems are essential.
Detailed understanding of relevant legislation and regulations is essential.
Numeracy, communication and presentation skills are essential, alongside experience of using Adobe Photoshop.
Experience of undertaking design and specification in refurbishment and new build construction projects.
Experience of preparing and submitting Building Regulations and Planning applications is essential.
Experience of applying CDM Regulations 2015 is essential.
Degree in Building Design/Technology or a related qualification with supported experience is desirable.
Ability to plan, prioritise and organise work to meet client requirements.
Flexible to meet the needs of the service.
Adaptable to change and new ways of working
Graduate Building Surveyor
* £26,000 - £35,000 + APC support + bonus
* Multi-disciplinary Consultancy
* Brighton, East Sussex
New opportunity for an experienced Graduate Building Surveyor, or Architectural Technician who wishes to develop experience in Surveying, to join an established Surveying firm that can offer a broad range of work across the private sector?
Person Specification: Graduate Building Surveyor – APC
* You will be qualified to degree level or equivilent in Building Surveying or associated subject
* You could alternatively come from a background in Architectural Technology and be looking for a transition in to Building Surveying
* Solid AutoCAD experience. Revit would be a bonus
* You will ideally have experience across all/some of the following sectors; Commercial, residential, utilities
Roles & Responsibilities: Graduate Building Surveyor
This role covers the full range of projects and professional instructions, whilst the bias will be slightly loaded towards project work: –
* Contract Administration
* Project Management
* Surveys (full range)
* Dilapidations
* Production of AutoCAD/Revit drawings
* Party Wall
Salary & Package: Graduate Building Surveyor
Salary between £26,000 - £35,000 dependant on experience and background, + pension + bonus scheme.
Company: Graduate Building Surveyor
This established company of Building Surveyors covers a broad range of projects and professional instructions, with a focus on the commercial, residential and utilities sectors.
APPLY : Graduate Building Surveyor
To discuss your options in confidence, apply on this page.
Graduate Building Surveyor – Jobs from HD Surveyors
Mar 23, 2022
Permanent
Graduate Building Surveyor
* £26,000 - £35,000 + APC support + bonus
* Multi-disciplinary Consultancy
* Brighton, East Sussex
New opportunity for an experienced Graduate Building Surveyor, or Architectural Technician who wishes to develop experience in Surveying, to join an established Surveying firm that can offer a broad range of work across the private sector?
Person Specification: Graduate Building Surveyor – APC
* You will be qualified to degree level or equivilent in Building Surveying or associated subject
* You could alternatively come from a background in Architectural Technology and be looking for a transition in to Building Surveying
* Solid AutoCAD experience. Revit would be a bonus
* You will ideally have experience across all/some of the following sectors; Commercial, residential, utilities
Roles & Responsibilities: Graduate Building Surveyor
This role covers the full range of projects and professional instructions, whilst the bias will be slightly loaded towards project work: –
* Contract Administration
* Project Management
* Surveys (full range)
* Dilapidations
* Production of AutoCAD/Revit drawings
* Party Wall
Salary & Package: Graduate Building Surveyor
Salary between £26,000 - £35,000 dependant on experience and background, + pension + bonus scheme.
Company: Graduate Building Surveyor
This established company of Building Surveyors covers a broad range of projects and professional instructions, with a focus on the commercial, residential and utilities sectors.
APPLY : Graduate Building Surveyor
To discuss your options in confidence, apply on this page.
Graduate Building Surveyor – Jobs from HD Surveyors
Graduate Building Surveyor
* £26,000 - £35,000 + APC support + bonus
* Multi-disciplinary Consultancy
* Brighton, East Sussex
New opportunity for an experienced Graduate Building Surveyor, or Architectural Technician who wishes to develop experience in Surveying, to join an established Surveying firm that can offer a broad range of work across the private sector?
Person Specification: Graduate Building Surveyor – APC
* You will be qualified to degree level or equivilent in Building Surveying or associated subject
* You could alternatively come from a background in Architectural Technology and be looking for a transition in to Building Surveying
* Solid AutoCAD experience. Revit would be a bonus
* You will ideally have experience across all/some of the following sectors; Commercial, residential, utilities
Roles & Responsibilities: Graduate Building Surveyor
This role covers the full range of projects and professional instructions, whilst the bias will be slightly loaded towards project work: –
* Contract Administration
* Project Management
* Surveys (full range)
* Dilapidations
* Production of AutoCAD/Revit drawings
* Party Wall
Salary & Package: Graduate Building Surveyor
Salary between £26,000 - £35,000 dependant on experience and background, + pension + bonus scheme.
Company: Graduate Building Surveyor
This established company of Building Surveyors covers a broad range of projects and professional instructions, with a focus on the commercial, residential and utilities sectors.
APPLY : Graduate Building Surveyor
To discuss your options in confidence, apply on this page.
Graduate Building Surveyor – Jobs from HD Surveyors
Mar 23, 2022
Permanent
Graduate Building Surveyor
* £26,000 - £35,000 + APC support + bonus
* Multi-disciplinary Consultancy
* Brighton, East Sussex
New opportunity for an experienced Graduate Building Surveyor, or Architectural Technician who wishes to develop experience in Surveying, to join an established Surveying firm that can offer a broad range of work across the private sector?
Person Specification: Graduate Building Surveyor – APC
* You will be qualified to degree level or equivilent in Building Surveying or associated subject
* You could alternatively come from a background in Architectural Technology and be looking for a transition in to Building Surveying
* Solid AutoCAD experience. Revit would be a bonus
* You will ideally have experience across all/some of the following sectors; Commercial, residential, utilities
Roles & Responsibilities: Graduate Building Surveyor
This role covers the full range of projects and professional instructions, whilst the bias will be slightly loaded towards project work: –
* Contract Administration
* Project Management
* Surveys (full range)
* Dilapidations
* Production of AutoCAD/Revit drawings
* Party Wall
Salary & Package: Graduate Building Surveyor
Salary between £26,000 - £35,000 dependant on experience and background, + pension + bonus scheme.
Company: Graduate Building Surveyor
This established company of Building Surveyors covers a broad range of projects and professional instructions, with a focus on the commercial, residential and utilities sectors.
APPLY : Graduate Building Surveyor
To discuss your options in confidence, apply on this page.
Graduate Building Surveyor – Jobs from HD Surveyors
Our client, a growing multi-disciplinary consultancy based in Sheffield are actively looking for an Architectural Technician / Technologist to join their expanding team. This is a fantastic opportunity for a Architectural Technician / Technologist to work and collaborate with a variety of talented staff.
Our client work with a variety of their own clients and therefore have projects in various different sectors including commercial, educational and residential. Projects vary from client to client do these include small to large scale extensions, refurbishments and conversions. The successful Architectural Technician / Technologist will be expected to create detailed drawings, working drawings and produce planning applications for several projects as well as producing 3D technical drawings, assisting other members of staff as well as attending site visits. The successful Architectural Technician / Technologist will be working on AutoCAD and Revit on a daily basis so a good working knowledge of this software will be important, however training will be provided for the right individual should they not be proficient with either software. Our client is open to the level of candidate and would even be open to Graduates with some experience.
This is an excellent opportunity for an Architectural Technician / Technologist to progress their career further and work well within a motivated and driven team.
Architectural Technician / Technologist Position Overview
Work on various projects differentiating in terms of size & sector
Work well within a team of Architectural Technician/Technologists'
Produce high-quality drawings on a range of software
Manage the team which also supports our building surveyors and project managers
Produce technical details
Architectural Technician / Technologist Position Requirements
Live in or around Sheffield
Good working knowledge of AutoCAD/Revit
Good technical knowledge
Strong portfolio showing off technical ability
Highly motivated with an excellent work ethic
Degree qualified or equivalent
Architectural Technician / Technologist Position Remuneration
Competitive salary (£21,000 - £35,000 DOE)
Pension
Holiday
Flexible working
Other benefits to be discussed at interview stage
Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy.
Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy
Jan 21, 2022
Permanent
Our client, a growing multi-disciplinary consultancy based in Sheffield are actively looking for an Architectural Technician / Technologist to join their expanding team. This is a fantastic opportunity for a Architectural Technician / Technologist to work and collaborate with a variety of talented staff.
Our client work with a variety of their own clients and therefore have projects in various different sectors including commercial, educational and residential. Projects vary from client to client do these include small to large scale extensions, refurbishments and conversions. The successful Architectural Technician / Technologist will be expected to create detailed drawings, working drawings and produce planning applications for several projects as well as producing 3D technical drawings, assisting other members of staff as well as attending site visits. The successful Architectural Technician / Technologist will be working on AutoCAD and Revit on a daily basis so a good working knowledge of this software will be important, however training will be provided for the right individual should they not be proficient with either software. Our client is open to the level of candidate and would even be open to Graduates with some experience.
This is an excellent opportunity for an Architectural Technician / Technologist to progress their career further and work well within a motivated and driven team.
Architectural Technician / Technologist Position Overview
Work on various projects differentiating in terms of size & sector
Work well within a team of Architectural Technician/Technologists'
Produce high-quality drawings on a range of software
Manage the team which also supports our building surveyors and project managers
Produce technical details
Architectural Technician / Technologist Position Requirements
Live in or around Sheffield
Good working knowledge of AutoCAD/Revit
Good technical knowledge
Strong portfolio showing off technical ability
Highly motivated with an excellent work ethic
Degree qualified or equivalent
Architectural Technician / Technologist Position Remuneration
Competitive salary (£21,000 - £35,000 DOE)
Pension
Holiday
Flexible working
Other benefits to be discussed at interview stage
Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy.
Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy
Job Description - Architectural Designer / Technician (Junior/Senior)
Architectural Designer / Technician wanted for a young ambitious company in Banstead, Surrey. Junior and senior candidates will be considered.
Role
The primary role is architectural design however your duties may also include construction estimating, sourcing land deals, organising construction projects and administrative duties.
The ideal candidate must have / be -
Local to Banstead and have own transport.
A genuine interest in design, construction and architecture.
Some experience using AutoCAD
Reliable and punctual.
Confident and motivated.
Self motivated, with a positive can do attitude.
Ability to work in a team or alone at times.
Along with the above responsibilities the successful candidates duties will include but are not limited to
Primary Duties
Assist in preparing existing and proposed architectural and building regulation drawings
Liaise with structural engineer regarding costs and design
Carry out measured surveys of properties to gain accurate measurements for layouts and elevations.
Transfer hand drawn sketches into Autocad format
Production of detailed scaled drawings using AutoCAD
Produce accurate quotation using company templates
Secondary Duties
Estimating construction projects utilising in house software
Sourceingand packaging potential land deals
General Administrative duties
Ordering materieals for construction projects
Arranging sub contractor quotations for construction projects
The successful candidate must have/be
Ability to multi-task, by managing multiple projects.
Creative and organised.
Have good verbal and written communication skills.
Able to meet deadlines.
Able to carry out all tasks in a professional manner and effectively communicate with both internal and external parties.
Passionate about property.
Willing to learn, work hard & be flexible.
A team player and able to work on own initiative.
Positive Attitude
If you are interested in the position and you are looking to work for a young ambitious company please do send a copy of your CV.
Job Type: Monday to Friday 8:00am - 5.00pm
Starting Salary: £18K - 30K depending on experience and knowledge.
Experience:
AutoCAD: 1 year (Preferred)
Oct 23, 2020
Full time
Job Description - Architectural Designer / Technician (Junior/Senior)
Architectural Designer / Technician wanted for a young ambitious company in Banstead, Surrey. Junior and senior candidates will be considered.
Role
The primary role is architectural design however your duties may also include construction estimating, sourcing land deals, organising construction projects and administrative duties.
The ideal candidate must have / be -
Local to Banstead and have own transport.
A genuine interest in design, construction and architecture.
Some experience using AutoCAD
Reliable and punctual.
Confident and motivated.
Self motivated, with a positive can do attitude.
Ability to work in a team or alone at times.
Along with the above responsibilities the successful candidates duties will include but are not limited to
Primary Duties
Assist in preparing existing and proposed architectural and building regulation drawings
Liaise with structural engineer regarding costs and design
Carry out measured surveys of properties to gain accurate measurements for layouts and elevations.
Transfer hand drawn sketches into Autocad format
Production of detailed scaled drawings using AutoCAD
Produce accurate quotation using company templates
Secondary Duties
Estimating construction projects utilising in house software
Sourceingand packaging potential land deals
General Administrative duties
Ordering materieals for construction projects
Arranging sub contractor quotations for construction projects
The successful candidate must have/be
Ability to multi-task, by managing multiple projects.
Creative and organised.
Have good verbal and written communication skills.
Able to meet deadlines.
Able to carry out all tasks in a professional manner and effectively communicate with both internal and external parties.
Passionate about property.
Willing to learn, work hard & be flexible.
A team player and able to work on own initiative.
Positive Attitude
If you are interested in the position and you are looking to work for a young ambitious company please do send a copy of your CV.
Job Type: Monday to Friday 8:00am - 5.00pm
Starting Salary: £18K - 30K depending on experience and knowledge.
Experience:
AutoCAD: 1 year (Preferred)
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Sep 28, 2020
Permanent
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Sep 28, 2020
Permanent
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Sep 28, 2020
Permanent
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Sep 28, 2020
Permanent
Job Description:
* Identify clients brief and produce clients requirements
* Carry out studies to understand if the clients requirements are feasible
* Prepare design of new scheme and design and access statement for full planning application or pre-application and listed building consent with help of planning consultant
* Review construction cost information, programme and health and safety strategy through every stage with help of team quantity surveyor
* Assist CAD technician to produce detailed design from the approved scheme
* Coordinate and integrate any works from consultants, specialists and suppliers
* Prepare package sufficient for building regulation submission
* Prepare and submit for approvals under building acts and/or regulations and other statutory requirements - if these drawings are outsourced then it must be monitored
* Prepare and give building notice under building acts/ regulations
* Aid in producing tender package or overlooking if it is outsourced
* Appraise and report on tenders/negotiations
* Enable the preparations of valuations and certify works that have been carried out
* Coordinate with project manager to monitor work against the contractor programme, review progress and report back to the client
* Arrange for another contractor to complete the works in the event of the contractor not doing so with help of project manager
* Take measured surveys on site, take levels and prepare drawings of site and/or building
* Undertake discussions/negotiations/contract administration/site visits with regards to the contractor not completing the contract on time
* Handover of building and conclusion of building contract
Experience
* RIBA Chartered Member
* Must have experience leading large projects
* Excellent knowledge of construction drawings and details
* Software fluency in AutoCAD and Revit
* Must have experience in all RIBA stages of work from planning to completion
* Must be organised and work effectively while able to lead a team
* 5 years’ experience required
Construction Jobs
GL19, Long Green, Worcestershire
Are you an aspiring MEASURED BUILDING SURVEYOR or a talented LAND SURVEYOR?
This is a terrific opportunity for an experienced Surveyor with a Measured Building Surveyor or Land Surveyor bias, to join a well-established, highly reputable, family-owned business, providing professional and bespoke measured building surveys for commercial and domestic customers throughout the UK- and reap the rewards!!!
MEASURED BUILDING SURVEYOR (MBS)
LOCATION: Gloucester/ Worcester based.
You may be searching for measured building surveyor roles or land survey jobs in Tewkesbury, Gloucestershire, Cheltenham, Worcester, Stroud, Evesham, Hereford, Wychavon, Worcestershire, Kidderminster, Warwick, Birmingham, Bristol. You will need a driving licence for occasional site visits.
SALARY: up to £35,000 basic with many benefits, bonuses, overtime opportunities, pension, free parking, flexi hours, home office option, choose your own hours, mileage/ out of pocket expenses, ongoing training, realistic career prospects.
HOURS: Full time, Permanent.
As a Measured Building Surveyor / Land Surveyor, you will be predominantly based in spacious, modern offices, as part of a friendly and dynamic team of surveyors. Working on multiple projects, producing floor plans, sections, and elevations of buildings for clients with land and building assets, using the most up- to-date, innovative technology to conduct accurate surveys, in at least one of the following:
* Measured Building Surveys
* Land & Topographical Surveys
* Laser Scanning Surveys
* Area Surveys
With a strong understanding of foundational surveying, you will be proficient in AutoCAD drafting and laser scanning, with knowledge in point cloud processing and good Microsoft Office skills. It would be advantageous if you have had exposure/experience in Revit, Photogrammetry, 3D modelling.
Ideally qualified to degree level in any of the following subjects: Land Surveying, Measured Building Surveying, Geomatics, Civil Engineering, Surveying and Mapping Sciences, Geographic Information/ Data Science, Mapping & Geospatial Data Science, Surveying, Mapping & GIS, CAD Engineering or similar professional qualification.
You will have at least 2 years’ experience of working in a land surveying / measured building surveying environment. Previous or current roles may include: Junior Land Surveyor, Junior Measured Building Surveyor, Land / Geomatics Surveyor, CAD Technician / Draughtsperson, Assistant Land Surveyor Engineer, Land and Building Surveying Graduate Engineer or Assistant Surveyor.
It is your positive can-do attitude, hardworking approach and passion for the surveying industry, that will create a fun and rewarding, long-term career with a rapidly growing company.
Interested in finding out more? click APPLY now!
Please Note: Typhoon Recruitment Ltd provides online advertising and response management recruitment services and does not operate as an employment agency or business. If your details match our client's requirements, your personal information as provided on your CV, will be released to our client so they can assess your suitability for the opportunity advertised. Your details will only be used by us in relation to this specific opportunity. By applying to this advertisement and submitting your CV and/or cover letter, you give your express consent to us using your details for this purpose
Aug 07, 2020
Permanent
Are you an aspiring MEASURED BUILDING SURVEYOR or a talented LAND SURVEYOR?
This is a terrific opportunity for an experienced Surveyor with a Measured Building Surveyor or Land Surveyor bias, to join a well-established, highly reputable, family-owned business, providing professional and bespoke measured building surveys for commercial and domestic customers throughout the UK- and reap the rewards!!!
MEASURED BUILDING SURVEYOR (MBS)
LOCATION: Gloucester/ Worcester based.
You may be searching for measured building surveyor roles or land survey jobs in Tewkesbury, Gloucestershire, Cheltenham, Worcester, Stroud, Evesham, Hereford, Wychavon, Worcestershire, Kidderminster, Warwick, Birmingham, Bristol. You will need a driving licence for occasional site visits.
SALARY: up to £35,000 basic with many benefits, bonuses, overtime opportunities, pension, free parking, flexi hours, home office option, choose your own hours, mileage/ out of pocket expenses, ongoing training, realistic career prospects.
HOURS: Full time, Permanent.
As a Measured Building Surveyor / Land Surveyor, you will be predominantly based in spacious, modern offices, as part of a friendly and dynamic team of surveyors. Working on multiple projects, producing floor plans, sections, and elevations of buildings for clients with land and building assets, using the most up- to-date, innovative technology to conduct accurate surveys, in at least one of the following:
* Measured Building Surveys
* Land & Topographical Surveys
* Laser Scanning Surveys
* Area Surveys
With a strong understanding of foundational surveying, you will be proficient in AutoCAD drafting and laser scanning, with knowledge in point cloud processing and good Microsoft Office skills. It would be advantageous if you have had exposure/experience in Revit, Photogrammetry, 3D modelling.
Ideally qualified to degree level in any of the following subjects: Land Surveying, Measured Building Surveying, Geomatics, Civil Engineering, Surveying and Mapping Sciences, Geographic Information/ Data Science, Mapping & Geospatial Data Science, Surveying, Mapping & GIS, CAD Engineering or similar professional qualification.
You will have at least 2 years’ experience of working in a land surveying / measured building surveying environment. Previous or current roles may include: Junior Land Surveyor, Junior Measured Building Surveyor, Land / Geomatics Surveyor, CAD Technician / Draughtsperson, Assistant Land Surveyor Engineer, Land and Building Surveying Graduate Engineer or Assistant Surveyor.
It is your positive can-do attitude, hardworking approach and passion for the surveying industry, that will create a fun and rewarding, long-term career with a rapidly growing company.
Interested in finding out more? click APPLY now!
Please Note: Typhoon Recruitment Ltd provides online advertising and response management recruitment services and does not operate as an employment agency or business. If your details match our client's requirements, your personal information as provided on your CV, will be released to our client so they can assess your suitability for the opportunity advertised. Your details will only be used by us in relation to this specific opportunity. By applying to this advertisement and submitting your CV and/or cover letter, you give your express consent to us using your details for this purpose
Are you an aspiring MEASURED BUILDING SURVEYOR or a talented LAND SURVEYOR?
This is a terrific opportunity for an experienced Surveyor with a Measured Building Surveyor or Land Surveyor bias, to join a well-established, highly reputable, family-owned business, providing professional and bespoke measured building surveys for commercial and domestic customers throughout the UK- and reap the rewards!!!
MEASURED BUILDING SURVEYOR (MBS)
LOCATION: Gloucester/ Worcester based.
You may be searching for measured building surveyor roles or land survey jobs in Tewkesbury, Gloucestershire, Cheltenham, Worcester, Stroud, Evesham, Hereford, Wychavon, Worcestershire, Kidderminster, Warwick, Birmingham, Bristol. You will need a driving licence for occasional site visits.
SALARY: up to £35,000 basic with many benefits, bonuses, overtime opportunities, pension, free parking, flexi hours, home office option, choose your own hours, mileage/ out of pocket expenses, ongoing training, realistic career prospects.
HOURS: Full time, Permanent.
As a Measured Building Surveyor / Land Surveyor, you will be predominantly based in spacious, modern offices, as part of a friendly and dynamic team of surveyors. Working on multiple projects, producing floor plans, sections, and elevations of buildings for clients with land and building assets, using the most up- to-date, innovative technology to conduct accurate surveys, in at least one of the following:
* Measured Building Surveys
* Land & Topographical Surveys
* Laser Scanning Surveys
* Area Surveys
With a strong understanding of foundational surveying, you will be proficient in AutoCAD drafting and laser scanning, with knowledge in point cloud processing and good Microsoft Office skills. It would be advantageous if you have had exposure/experience in Revit, Photogrammetry, 3D modelling.
Ideally qualified to degree level in any of the following subjects: Land Surveying, Measured Building Surveying, Geomatics, Civil Engineering, Surveying and Mapping Sciences, Geographic Information/ Data Science, Mapping & Geospatial Data Science, Surveying, Mapping & GIS, CAD Engineering or similar professional qualification.
You will have at least 2 years’ experience of working in a land surveying / measured building surveying environment. Previous or current roles may include: Junior Land Surveyor, Junior Measured Building Surveyor, Land / Geomatics Surveyor, CAD Technician / Draughtsperson, Assistant Land Surveyor Engineer, Land and Building Surveying Graduate Engineer or Assistant Surveyor.
It is your positive can-do attitude, hardworking approach and passion for the surveying industry, that will create a fun and rewarding, long-term career with a rapidly growing company.
Aug 06, 2020
Full time
Are you an aspiring MEASURED BUILDING SURVEYOR or a talented LAND SURVEYOR?
This is a terrific opportunity for an experienced Surveyor with a Measured Building Surveyor or Land Surveyor bias, to join a well-established, highly reputable, family-owned business, providing professional and bespoke measured building surveys for commercial and domestic customers throughout the UK- and reap the rewards!!!
MEASURED BUILDING SURVEYOR (MBS)
LOCATION: Gloucester/ Worcester based.
You may be searching for measured building surveyor roles or land survey jobs in Tewkesbury, Gloucestershire, Cheltenham, Worcester, Stroud, Evesham, Hereford, Wychavon, Worcestershire, Kidderminster, Warwick, Birmingham, Bristol. You will need a driving licence for occasional site visits.
SALARY: up to £35,000 basic with many benefits, bonuses, overtime opportunities, pension, free parking, flexi hours, home office option, choose your own hours, mileage/ out of pocket expenses, ongoing training, realistic career prospects.
HOURS: Full time, Permanent.
As a Measured Building Surveyor / Land Surveyor, you will be predominantly based in spacious, modern offices, as part of a friendly and dynamic team of surveyors. Working on multiple projects, producing floor plans, sections, and elevations of buildings for clients with land and building assets, using the most up- to-date, innovative technology to conduct accurate surveys, in at least one of the following:
* Measured Building Surveys
* Land & Topographical Surveys
* Laser Scanning Surveys
* Area Surveys
With a strong understanding of foundational surveying, you will be proficient in AutoCAD drafting and laser scanning, with knowledge in point cloud processing and good Microsoft Office skills. It would be advantageous if you have had exposure/experience in Revit, Photogrammetry, 3D modelling.
Ideally qualified to degree level in any of the following subjects: Land Surveying, Measured Building Surveying, Geomatics, Civil Engineering, Surveying and Mapping Sciences, Geographic Information/ Data Science, Mapping & Geospatial Data Science, Surveying, Mapping & GIS, CAD Engineering or similar professional qualification.
You will have at least 2 years’ experience of working in a land surveying / measured building surveying environment. Previous or current roles may include: Junior Land Surveyor, Junior Measured Building Surveyor, Land / Geomatics Surveyor, CAD Technician / Draughtsperson, Assistant Land Surveyor Engineer, Land and Building Surveying Graduate Engineer or Assistant Surveyor.
It is your positive can-do attitude, hardworking approach and passion for the surveying industry, that will create a fun and rewarding, long-term career with a rapidly growing company.
Project Management Staff
Ireland - Nationwide
€Neg + Package
Ireland's Call!
Thinking of returning to work in Ireland, looking for a move to Dublin?
A welcome upturn in construction activity has generated several vacancies in the commercial, residential, medical, industrial, pharmaceutical, civil engineering, mechanical and electrical sectors. Clients include main contractors, developers and project management companies on projects from €5m to in excess of €200m in traditional and PPP type forms.
Where / When?
By appointment we are meeting candidates to inform you of the current opportunities in the Dublin area, we are available at:
ICDS HQ, Fitzwilliam St Upper, Dublin 2.
ICDS UK, Lombard St, Bank, Central London.
Vacancies include:
Contract Manager/ Project Manager /Site Agent / Site Manager
Commercial Manager / Senior QS / Project QS / Estimator
Site Engineer / Setting Out Engineer / Land Surveyor
Civil Engineer / Structures Agent / RC Frame Foreman
Bid Manager / Construction Planner / BIM Coordinator
Building Services Coordinator / M&E Project Manager
CAD Technician / Architectural Technician
Safety Officer / Safety Manager / QA, QC
Next Step?
To book an appointment please send your cv to (url removed)
Aug 03, 2020
Permanent
Project Management Staff
Ireland - Nationwide
€Neg + Package
Ireland's Call!
Thinking of returning to work in Ireland, looking for a move to Dublin?
A welcome upturn in construction activity has generated several vacancies in the commercial, residential, medical, industrial, pharmaceutical, civil engineering, mechanical and electrical sectors. Clients include main contractors, developers and project management companies on projects from €5m to in excess of €200m in traditional and PPP type forms.
Where / When?
By appointment we are meeting candidates to inform you of the current opportunities in the Dublin area, we are available at:
ICDS HQ, Fitzwilliam St Upper, Dublin 2.
ICDS UK, Lombard St, Bank, Central London.
Vacancies include:
Contract Manager/ Project Manager /Site Agent / Site Manager
Commercial Manager / Senior QS / Project QS / Estimator
Site Engineer / Setting Out Engineer / Land Surveyor
Civil Engineer / Structures Agent / RC Frame Foreman
Bid Manager / Construction Planner / BIM Coordinator
Building Services Coordinator / M&E Project Manager
CAD Technician / Architectural Technician
Safety Officer / Safety Manager / QA, QC
Next Step?
To book an appointment please send your cv to (url removed)
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Jun 16, 2020
Full time
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Dec 03, 2019
Full time
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Right Talent
Hemel Hempstead, England, United Kingdom
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time.
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Dec 02, 2019
Full time
Client
My client was established in 1988 with the desire to provide innovative homes and commercial properties, which would offer real value for money without compromising on design, durability or quality. Today they are is one of the UK’s largest independent property development companies, with over 10,000 happy customers and more than 100 industry awards for design and quality – and it’s all thanks to the vision and passion of their dedicated team.
The role will be based in their Hemel Hempstead office and working on a mixture of prestigious, high value residential and mixed use projects.
Main Purpose of the job:
Liaising, co-ordinating with other departments regarding development works including Engineers, Surveyors, Buyers and the Construction team.
Production of Building and site surveys from information provided by Site Engineers. * General project co-ordination.
Organisation and preparation of detailed design drawings to Building Regulation / Tender and Construction status.
Writing project and elemental specifications.
Assisting in the preparation of tender documents.
Co-ordination with contractors on site.
Contract administration.
Site visits and inspections.
Carrying out defects inspections on completion of works on site.
Arranging copies of drawings for other departments and consultants.
Updating computer based drawings.
Electronic archiving of drawings received from consultants.
Maintain computer and hard copy of files in the approved drawing office structure and format and ensure that all communications drawing folders and superceded drawing information is up to date and contained within hard files for easy retrieval of information.
Assisting other members of the Design Department in their day-to-day duties.
Co-ordination with external professional consultants.
Liaison with building control authority, fire authority and other regulatory bodies.
Liaison with local authorities and utility service provider.
Reference and keep up to date with current statutory requirements and liaise with technical manager and other drawing office work colleagues in respect of compliance with statutory requirements or advice on technical detailing.
Liaison with Structural Engineers and other consultants (M and E / Lift / Landscape consultant etc) and coordinate structure and service installations within project design information.
Develop design information to detailed status to included sections / details / schedules for construction and ordering purposes including liaison with buyers
Maintenance of drawing information schedule and timely preparation of design information to issue to other design team members (Quantity surveyor / structural engineer / M and E and other consultants).
Offer coaching and guidance of Trainees within the department
Provision of AutoCAD format drawings to assist in the preparation of brochure information and sales literature
Preparation and maintenance of Legal plans in relation to residential and commercial sales.
Attendance at design coordination meetings and preparation of minutes for the meeting
Attendance at construction / site meetings
Attendance at client meetings from time to time.
About you
You will be fully conversant with current Building Regulations, NHBC Standards and be extremely proficient in 2D AutoCAD, Microsoft Office packages and Adobe. Ideally, the successful candidate will have experience in residential developments in the UK from individual houses to large scale regeneration projects. You will be a strong communicator, with confidence to deal with professional consultants on a daily basis and be self-motivated, and be able to work on your own initiative.
Qualifications and training
You will possess a relevant architectural qualification, be preferably a member of CIAT or RIBA.
Job Type: Full-time
Salary: £30,000.00 to £37,500.00 /year
Experience:
Architectural experience on residential projects: 3 years (Required)
Education:
Bachelor’s (Required)
License or certification:
MCIAT (Chartered Institute of Architectural Technologists) (Required)
Role: Project Manager (Bespoke Joinery Fit-Out)
Business Sector: Contracts Division
Location: Stoke-on-Trent
Salary: 35 – 40k
Overall Responsibility
Main Responsibilities
The Project Manager is assigned to a number of live projects to ensure that all relevant goals are met. Project Manager has the ultimate responsibility for all aspects within the client order. Typically, you will work closely with their Clients Fitting Managers, Subcontractors and Suppliers as well as client representatives such as Design Managers, Project Managers, Architects and Engineers on a project.
With assistance of the rest of the Project Team (team needs defining), you will you will help to ensure that the project is delivered on time, to budget and to the required quality standard (within agreed specifications). The Project Manager is also responsible for managing the work of sub contract manufacturers and suppliers, allocating and utilising resources in an efficient manner and maintaining a co-operative, motivated and successful team through to completion.
Project Management
Responsible for the daily performance of the projects whilst ensuring that future commitments, orders and production delivery dates are planned in against the Programme Dates.
Any building project will need resources it is the responsibility of the Project Manager to have an understanding of what these are and ensure they are available.
Managing project risks, including the development of contingency plans
Liaise with project team to ensure that work is neither overlooked or duplicated
Monitoring overall progress and use of resources, initiating corrective action where necessary
project progress throughout the live projects reporting throughout and end-stage assessments
Adopting and applying appropriate technical and quality strategies and standards
Identifying and obtaining support and advice required for the management, planning and control of the project
Conducting a project evaluation review to assess how well the project was managed i.e. subcontracting team.
Identify suitable contractors who can complete the work and oversee their appointment in a timely manner (appointment by fitting manager and commercial manager.
Spend his/her time within our offices, following up formal request for information and confirmations; liaise with quantity surveying team to discuss cost.
Interpret drawings/specifications to allow CAD Technician to produce technical drawings
Assist in chasing instructions to cover additional work and reporting findings to the Quantity surveyor, is responsible for cost monitoring – information provided to QS by project team
Attend contract/progress meetings
Provide factory personnel (Team Leaders) with guidance regarding manufacturing processes as applicable
Attend meetings with Customer /Fitting Manager when deemed appropriate.
Maintain regular dialogue with site Fitting Manager.
Liaise with Clients, suppliers and Customer.
Professional & competent manner at all times.
Maintain and understand profitability. Following all projects through all stages from start to hand over through to final accounts
Sign off each contract upon final completion (with the client)
Budget Management
Thorough understanding of contract budgets with a proactive approach to minimising costs and optimising margin.
Site surveys
Project manager is to assist with sourcing accurate & detailed site surveys.
Meet with the key production managers (in-house and external) and other members of the Factory Management Team and also the Commercial and Construction teams within the organisation.
Check the drawing information received for errors/ omissions and notify appropriate client / suppliers / architect and fitting manager.
Programme of works
Plan the Programme of Work accurately with liaison with the client
Liaise with Project Coordinator regarding materials using various internal procurement methods, ensuring best rate for all materials ensuring purchase orders raised are monitored for delivery/quality/quantity and cost, once all criteria are met Ordering/purchasing materials/plant are scheduled in against programme delivery dates and the suppliers are updated.
Design
Attend site meeting with the Architect to discuss and agree technical CAD drawing’s
Assist in the preparation & issue of Factory manufacturing drawings.
Prepare / develop schedules / for workshop production and delivery
Liaise with site Fitting Manager/ Contracts Manager / Supply only clients where required to clarify details / request additional information
Review revised drawings and amend documentation
Ensure joinery works are manufactured in line with the relevant Global assessment details relating to fire assessments on doorsets.
Personal Attributes
The project manager should be able to:
Establish a good working relationship with the senior client representatives.
Direct, manage and motivate the project team
Develop and maintain an agreed project plan and detailed stage plans
Tailor expert knowledge to meet specific circumstances
Plan and manage deployment of physical and financial resources to meet project milestones
Build and sustain effective communications with other personnel involved in the project
Apply quality management principles and processes
From the outset, it is the responsibility of the PM to plan the build process, this means producing a critical path and understanding the timing of each stage. Following each phase of the project is essential to ensuring that the project is completed on time.
Relentlessly Proactive
Prioritise and organise, taking a methodical approach
Self-motivated, enthusiastic with a high standard of personal performance
Flexible and reliable
Ability to use own initiative
Present information clearly, concisely and professionally
Attention to detail
Customer focused
Communicator & motivator with ability to communicate across all levels of seniority from the workface through to Senior Management level.
‘Can do’ attitude to work
About ATS
ATS Recruitment are a specialist agency supplying skilled candidates into the high technology engineering and construction industries on both a permanent and contract basis.
We are extremely experienced and knowledgeable about the sectors we recruit into and have several large national (UK) and international clients who repeatedly use our services.
Please visit our website www. atsrecruitment. co.uk or for our latest roles and news
Jan 22, 2017
Role: Project Manager (Bespoke Joinery Fit-Out)
Business Sector: Contracts Division
Location: Stoke-on-Trent
Salary: 35 – 40k
Overall Responsibility
Main Responsibilities
The Project Manager is assigned to a number of live projects to ensure that all relevant goals are met. Project Manager has the ultimate responsibility for all aspects within the client order. Typically, you will work closely with their Clients Fitting Managers, Subcontractors and Suppliers as well as client representatives such as Design Managers, Project Managers, Architects and Engineers on a project.
With assistance of the rest of the Project Team (team needs defining), you will you will help to ensure that the project is delivered on time, to budget and to the required quality standard (within agreed specifications). The Project Manager is also responsible for managing the work of sub contract manufacturers and suppliers, allocating and utilising resources in an efficient manner and maintaining a co-operative, motivated and successful team through to completion.
Project Management
Responsible for the daily performance of the projects whilst ensuring that future commitments, orders and production delivery dates are planned in against the Programme Dates.
Any building project will need resources it is the responsibility of the Project Manager to have an understanding of what these are and ensure they are available.
Managing project risks, including the development of contingency plans
Liaise with project team to ensure that work is neither overlooked or duplicated
Monitoring overall progress and use of resources, initiating corrective action where necessary
project progress throughout the live projects reporting throughout and end-stage assessments
Adopting and applying appropriate technical and quality strategies and standards
Identifying and obtaining support and advice required for the management, planning and control of the project
Conducting a project evaluation review to assess how well the project was managed i.e. subcontracting team.
Identify suitable contractors who can complete the work and oversee their appointment in a timely manner (appointment by fitting manager and commercial manager.
Spend his/her time within our offices, following up formal request for information and confirmations; liaise with quantity surveying team to discuss cost.
Interpret drawings/specifications to allow CAD Technician to produce technical drawings
Assist in chasing instructions to cover additional work and reporting findings to the Quantity surveyor, is responsible for cost monitoring – information provided to QS by project team
Attend contract/progress meetings
Provide factory personnel (Team Leaders) with guidance regarding manufacturing processes as applicable
Attend meetings with Customer /Fitting Manager when deemed appropriate.
Maintain regular dialogue with site Fitting Manager.
Liaise with Clients, suppliers and Customer.
Professional & competent manner at all times.
Maintain and understand profitability. Following all projects through all stages from start to hand over through to final accounts
Sign off each contract upon final completion (with the client)
Budget Management
Thorough understanding of contract budgets with a proactive approach to minimising costs and optimising margin.
Site surveys
Project manager is to assist with sourcing accurate & detailed site surveys.
Meet with the key production managers (in-house and external) and other members of the Factory Management Team and also the Commercial and Construction teams within the organisation.
Check the drawing information received for errors/ omissions and notify appropriate client / suppliers / architect and fitting manager.
Programme of works
Plan the Programme of Work accurately with liaison with the client
Liaise with Project Coordinator regarding materials using various internal procurement methods, ensuring best rate for all materials ensuring purchase orders raised are monitored for delivery/quality/quantity and cost, once all criteria are met Ordering/purchasing materials/plant are scheduled in against programme delivery dates and the suppliers are updated.
Design
Attend site meeting with the Architect to discuss and agree technical CAD drawing’s
Assist in the preparation & issue of Factory manufacturing drawings.
Prepare / develop schedules / for workshop production and delivery
Liaise with site Fitting Manager/ Contracts Manager / Supply only clients where required to clarify details / request additional information
Review revised drawings and amend documentation
Ensure joinery works are manufactured in line with the relevant Global assessment details relating to fire assessments on doorsets.
Personal Attributes
The project manager should be able to:
Establish a good working relationship with the senior client representatives.
Direct, manage and motivate the project team
Develop and maintain an agreed project plan and detailed stage plans
Tailor expert knowledge to meet specific circumstances
Plan and manage deployment of physical and financial resources to meet project milestones
Build and sustain effective communications with other personnel involved in the project
Apply quality management principles and processes
From the outset, it is the responsibility of the PM to plan the build process, this means producing a critical path and understanding the timing of each stage. Following each phase of the project is essential to ensuring that the project is completed on time.
Relentlessly Proactive
Prioritise and organise, taking a methodical approach
Self-motivated, enthusiastic with a high standard of personal performance
Flexible and reliable
Ability to use own initiative
Present information clearly, concisely and professionally
Attention to detail
Customer focused
Communicator & motivator with ability to communicate across all levels of seniority from the workface through to Senior Management level.
‘Can do’ attitude to work
About ATS
ATS Recruitment are a specialist agency supplying skilled candidates into the high technology engineering and construction industries on both a permanent and contract basis.
We are extremely experienced and knowledgeable about the sectors we recruit into and have several large national (UK) and international clients who repeatedly use our services.
Please visit our website www. atsrecruitment. co.uk or for our latest roles and news