Mane Contract Services

MANE Infrastructure are looking for a CPCS/NPORT Traffic Banksman with a ICI LU to work on a London underground project in the Enfield area. Applicants will need to ensure the safe movement of vehicles, plant, and pedestrians on construction, industrial, logistics, or operational sites by directing traffic and providing clear signals to drivers and equipment operators. The Traffic Banksman helps prevent accidents, damage to property, and injury to personnel by maintaining effective traffic management procedures. Key Responsibilities Direct and control the movement of vehicles and mobile plant on site using approved hand signals and communication methods. Guide reversing vehicles and plant equipment safely in areas with restricted visibility. Monitor vehicle and pedestrian routes to ensure safe separation and compliance with site traffic management plans. Assist with the delivery and unloading of materials by guiding drivers to designated locations. Conduct visual checks of work areas before vehicle movements commence. Ensure exclusion zones and designated traffic routes are maintained and respected. Communicate clearly with drivers, plant operators, and site personnel to coordinate safe movements. Report hazards, near misses, incidents, and unsafe practices to supervisors immediately. Assist in maintaining site safety signage, barriers, and traffic control measures. Stop vehicle operations when unsafe conditions arise. Participate in site safety briefings, toolbox talks, and training sessions. Maintain awareness of changing site conditions that may affect traffic movements. Health, Safety & Environmental Responsibilities Comply with all company Health, Safety, Environmental, and Quality procedures. Wear and maintain required Personal Protective Equipment (PPE). Follow site-specific risk assessments, method statements, and traffic management plans. Promote a positive safety culture and intervene where unsafe acts or conditions are observed. Ensure all activities are conducted in accordance with relevant legislation and site rules. Skills and Competencies Good understanding of traffic management and site safety procedures. Ability to communicate clearly and confidently with drivers and site personnel. Strong awareness of hazards associated with vehicle and plant movements. Ability to remain alert and focused in busy environments. Good observation and decision-making skills. Ability to work independently and as part of a team.

Senior Planning Engineer - Civil Engineering Location: Ipswich (Head Office) Employment Type: Full Time Sector: Civil Engineering / Infrastructure We are currently seeking a Senior Planning Engineer to join a well-established civil engineering business based at its Head Office in Ipswich. This is a key role within the pre-construction and delivery support function, working closely with tendering teams and operational staff to develop efficient, buildable, and commercially viable construction programmes across a range of civil engineering schemes. The successful candidate will bring strong site-based civil engineering experience, allowing them to translate practical construction knowledge into effective planning solutions and delivery strategies. Role Overview In this position, you will be responsible for developing, reviewing, and advising on construction methodologies and programmes during both tender and pre-contract stages. You will play an important role in ensuring that schemes are planned efficiently, risks are considered early, and alternative delivery methods are explored to achieve the best possible outcomes. Key Responsibilities Review tender documentation in detail and assess the most effective construction methodologies Develop build strategies and delivery options based on site constraints and engineering requirements Work closely with the tender team to explore alternative approaches and value engineering opportunities Assess subcontracted works with a focus on buildability and compliance with tender requirements Contribute to tender submissions, including supporting planning documentation and methodology statements Ensure programmes and planning outputs reflect project-specific constraints and requirements Provide expert input on construction methods, sequencing, and problem-solving solutions Support the development of accurate and logical construction programmes Maintain awareness of industry developments, innovations, and relevant legislation About You We are looking for someone with strong practical experience in civil engineering environments who can confidently apply site knowledge to planning and programme development. You should have: A background in civil engineering with significant site-based experience Minimum HNC (or equivalent) in Civil Engineering Strong communication and collaboration skills Ability to work effectively as part of a pre-construction and tendering team Experience using planning software such as Asta Powerproject or Microsoft Project (desirable, not essential) A proactive, problem-solving mindset with strong attention to detail Ability to translate technical construction knowledge into clear planning outputs Training and development can be provided for the right individual where required. What's on Offer The company offers a supportive working environment with strong opportunities for career progression and professional development, including: Competitive salary package Hybrid working arrangements Company pension scheme with up to 8% employer contribution Life assurance (4x annual salary) 25 days holiday plus bank holidays (with option to purchase additional leave) Extensive training and development programmes Cycle to Work scheme Employee Assistance Programme Employee benefits platform Free on-site parking Regular company events, social activities, and charity initiatives Early finish every Friday as part of a flexible working culture

Are you an experienced Warehouse Operative with a valid Forklift Truck (FLT) licence? We're looking for a motivated and safety-focused individual to join our busy operations team in South Yorkshire. This is an excellent opportunity to become part of a well-established business offering a competitive salary, great benefits, and a supportive working environment. What You'll Be Doing As a Warehouse Operative, you'll play a key role in ensuring the smooth running of our warehouse and yard operations. Your responsibilities will include: Loading and unloading deliveries safely and efficiently using an FLT. Checking delivery documentation and reporting any discrepancies. Picking, preparing, and organising products for internal and external orders. Maintaining accurate stock storage and housekeeping standards. Supporting other operational areas, including painting and picking departments, when required. Following all health and safety procedures to maintain a safe working environment. What We're Looking For To be successful in this role, you will have: Previous warehouse or logistics experience. A valid Forklift Truck (FLT) licence/certification. Experience loading and unloading vehicles using an FLT. A strong commitment to health and safety. Good attention to detail and accuracy. A flexible, reliable, and team-oriented approach. The ability to undertake manual handling duties. Working Hours Monday to Thursday: 8:30am - 4:30pm Friday: 8:30am - 4:00pm What We Offer In addition to a competitive salary based on experience, we offer: Company pension scheme Sick pay scheme Health plan Cycle to Work scheme Sharesave scheme Option to purchase additional annual leave Ongoing training and development opportunities If you're looking for a varied warehouse role within a stable and growing business, we'd love to hear from you. Apply today to join our team in South Yorkshire.

Yard Operative / Steel Loader Location: South Yorkshire Overview We are currently recruiting for a Yard Operative / Steel Loader to join a team in South Yorkshire. This is an excellent opportunity for a motivated and reliable individual to work within a busy steel and heavy industrial environment. The successful candidate will support the efficient handling, loading, and movement of steel materials while maintaining high standards of safety and teamwork. Key Responsibilities Loading and unloading steel materials safely and efficiently. Supporting the day-to-day operations of the yard. Handling and moving steel products within the yard environment. Assisting with stock organisation and material storage. Ensuring all tasks are carried out in line with company health and safety procedures. Maintaining a clean, safe, and organised working environment. Skills, Experience & Qualifications Experience handling steel or working within a heavy industrial environment is advantageous. Mobile plant licences are preferred. Overhead crane licences are preferred. Strong understanding of health and safety within an industrial setting. Ability to work effectively as part of a team. Reliable, hardworking, and proactive approach to work. Salary & Benefits Salary is competitive and dependent on experience. Benefits include: Company pension scheme Sick pay scheme Health plan Cycle to Work scheme Sharesave scheme Option to purchase additional holidays Apply If you are looking to build your career within a well-established and supportive company, we would like to hear from you.

Senior Quantity Surveyor - Civil Engineering & Infrastructure Kent Folkestone / Dover Area Permanent Hybrid Working Available An established and growing civil engineering contractor is seeking a Senior Quantity Surveyor to join its Southern Region commercial team. This opportunity offers involvement in major infrastructure projects across Kent, including highways improvements and significant works associated with the Port of Dover. This role is ideally suited to an experienced Senior Quantity Surveyor looking to take a leading commercial position on complex civil engineering schemes while supporting the development of junior team members. The Opportunity Working closely with project and commercial leadership teams, you will be responsible for driving commercial performance, maintaining financial control, and ensuring projects are delivered in line with contractual and business objectives. Key responsibilities will include: Managing the commercial performance of projects from pre-construction through to final account. Producing cost reports, forecasts, estimates, and financial analysis. Identifying commercial risks and implementing appropriate mitigation strategies. Procuring and managing subcontract packages. Preparing and administering subcontract agreements and associated documentation. Reviewing, valuing, and certifying subcontractor applications for payment. Managing variations, compensation events, and change control processes. Supporting the resolution of contractual and commercial disputes where required. Ensuring compliance with contractual obligations, company procedures, and industry standards. Providing guidance and mentoring to Assistant and Quantity Surveyors within the team. Candidate Requirements The successful applicant will demonstrate strong commercial acumen and a proven background in civil engineering contracting. You should have: Previous experience in a Senior Quantity Surveyor position. A track record of working for a main contractor on highways or wider civil engineering projects. Strong knowledge and practical experience of NEC contracts. Excellent commercial management and cost control capabilities. Strong negotiation, communication, and stakeholder engagement skills. The ability to manage multiple priorities within a fast-paced project environment. Good IT and numerical skills with a strong attention to detail. A full UK driving licence and willingness to travel across regional project locations when required. Salary & Benefits The successful candidate will receive a competitive salary and comprehensive benefits package, including: Hybrid working arrangements Company car or car allowance Pension scheme with enhanced employer contributions Life assurance cover 25 days annual leave plus bank holidays Option to purchase additional annual leave Ongoing professional development and training opportunities Cycle to Work scheme Employee Assistance Programme Employee benefits and discount platform Free parking at operational sites Company social events and charity initiatives Structured career progression opportunities Early finish every Friday through the company's popular flexible working initiative Apply This is an excellent opportunity to join a successful civil engineering contractor delivering key infrastructure projects across the Southeast while benefiting from genuine long-term career development and progression.

Quantity Surveyor - Civil Engineering Location: Staffordshire (Hybrid Working) Initial Project: Stoke Infrastructure Scheme Region: Northern Region Travel: Regional site visits required We are currently supporting the appointment of a Quantity Surveyor to join a growing civil engineering team operating across the Northern Region. This role offers a balanced mix of office, site, and remote working, with the initial focus placed on a major scheme based in Stoke. The position is best suited to someone based within a reasonable commuting distance of both Tamworth and Stoke, due to the hybrid and site-based nature of the work. Role Overview The Quantity Surveyor will play a key role in supporting the commercial delivery of infrastructure projects, ensuring strong cost control, contractual compliance, and accurate financial reporting across all stages of delivery. You will be involved in both pre-contract and post-contract duties, working closely with operational teams, subcontractors, and clients to support successful project outcomes. Key Responsibilities Maintain compliance with required standards relating to safety, quality, and environmental performance Produce and manage project documentation including cost plans, budgets, contracts, and bills of quantities Carry out site-based measurements and interpret construction drawings Support feasibility assessments and evaluate client requests from a commercial perspective Prepare cost estimates and support tendering activities Review subcontractor quotations and support procurement processes Manage valuation processes, including interim applications and final account agreement Prepare and negotiate variation accounts and change control documentation Issue payment certifications to subcontractors in line with contract requirements Conduct ongoing cost reporting and financial analysis across project works Support the identification and management of commercial risks Assist with contractual matters and provide supporting information for dispute resolution when required About You We are looking for a motivated and commercially aware individual who is confident working across both site and office environments. The ideal candidate will demonstrate: Previous experience as a Quantity Surveyor within heavy civil engineering or infrastructure projects Strong working knowledge of NEC contract forms Excellent communication and stakeholder management skills A proactive and solution-focused approach to commercial challenges Strong numerical, analytical, and IT skills Confidence working in a fast-paced project environment with multiple priorities A full UK driving licence and flexibility to travel across regional sites What's on Offer In return, the successful candidate will join a supportive and growing business offering long-term career development and a strong benefits package, including: Competitive salary and company car or car allowance Hybrid working arrangement Pension scheme with up to 8% employer contribution Life assurance (4x annual salary) 25 days annual leave plus bank holidays (with option to purchase additional leave) Comprehensive training and development programmes Cycle to Work scheme Employee Assistance Programme Access to employee discounts and benefits platform Free on-site parking Regular company events, social activities, and charity initiatives Early finish every Friday as part of the company's flexible working culture Apply This is an excellent opportunity for a Quantity Surveyor looking to develop their career within a well-established civil engineering environment, working on varied infrastructure schemes across the region.

Senior Quantity Surveyor - Civil Engineering Location: East Sussex (Near Eastbourne) Employment Type: Full Time Sector: Highways & Major Infrastructure We're working with a well-established civil engineering contractor who is looking to appoint a Senior Quantity Surveyor to join their Southern Region commercial team. The successful candidate will be based on a major infrastructure scheme near Eastbourne in East Sussex. This project involves the delivery of significant highways upgrades and bridge construction works. It presents a strong opportunity to take ownership of a key regional project within a stable and well-structured business. Overview of the Role This position plays a key role in the commercial delivery of a major civil engineering project. You will be responsible for ensuring strong financial control, effective risk management, and robust contractual administration throughout the lifecycle of the scheme. Working closely with operational and project teams, you will help drive performance while also supporting the development of junior commercial staff within the business. Key Responsibilities Take responsibility for commercial performance across assigned works Support and mentor junior members of the commercial team Monitor project costs and ensure alignment with budgets and forecasts Manage subcontract procurement and associated contract documentation Assess, value, and agree subcontractor applications for payment Prepare and negotiate variations and compensation events Identify commercial risks and support mitigation strategies Produce cost reports, estimates, and financial forecasts Assist with contractual correspondence and dispute-related matters where required Ensure compliance with company procedures and all health, safety, quality, and environmental standards About You We are looking for an experienced Senior Quantity Surveyor with a strong background in civil engineering projects and main contractor environments. You will ideally have: Previous experience in a Senior Quantity Surveyor role Strong working knowledge of NEC contracts Experience delivering highways, bridge, or wider infrastructure projects Excellent commercial awareness and negotiation skills Strong numerical and analytical ability Confident communication skills with stakeholders at all levels A proactive and adaptable approach to problem solving Full UK driving licence and willingness to travel regionally as required What's on Offer The successful candidate will join a supportive and growing organisation offering long-term development and a strong benefits package, including: Competitive salary plus company car or car allowance Hybrid working arrangements Pension scheme with up to 8% employer contribution Life assurance cover 25 days annual leave plus bank holidays (option to purchase additional days) Ongoing training and professional development opportunities Cycle to Work scheme Employee Assistance Programme Employee discounts and benefits platform Regular company events and social activities Early finish every Friday as part of a flexible working culture Apply This is a strong opportunity for a Senior Quantity Surveyor looking to take a leading role on a significant infrastructure project while continuing to develop within a forward-thinking civil engineering business.

Fabricator Welder - Days Location: South Yorkshire Overview We are currently recruiting for an experienced Fabricator Welder - Days to join a team in South Yorkshire. This role is responsible for cutting, assembling, and welding steel components used in the construction of buildings, bridges, industrial plants, and other large-scale structures. The successful candidate will transform raw steel materials into accurate, high-quality structural elements in line with engineering drawings, specifications, and quality standards. Key Responsibilities Read and interpret technical drawings and specifications. Fabricate and assemble structural steel components including: UB's UC's PFC's CHS's Perform cutting, grinding, and welding tasks to meet project requirements. Safely operate hand tools, fabrication machinery, and measuring equipment. Ensure all fabricated work meets dimensional accuracy and quality standards. Operate lifting equipment including overhead cranes. Maintain a safe, clean, and organised work environment. Work collaboratively with supervisors and team members to meet production deadlines. Wear correct PPE at all times. Follow all health & safety procedures and safe working practices. Skills, Experience & Qualifications Previous experience in structural steel fabrication is essential. Trade qualification in fabrication/welding is preferred but not essential. Ability to read and understand engineering drawings. Strong welding and metalworking skills. Excellent attention to detail and commitment to quality. Good physical fitness and ability to handle steel materials safely. Strong understanding of workshop health & safety practices. Reliable with a strong work ethic, punctuality, and dependability. Good communication skills and ability to work effectively within a team. Please note: This job description is intended as a general overview of the role and may be amended as required. Salary & Benefits Salary is competitive and dependent on experience. Benefits include: Company pension scheme Sick pay scheme Health plan Cycle to Work scheme Sharesave scheme Option to purchase additional holidays Apply If you are an experienced Fabricator Welder looking to join a well-established and supportive business in South Yorkshire, we would like to hear from you.

We are currently recruiting for experienced Fabricator Welders to join a night shift team based in South Yorkshire. This is an excellent opportunity to work within a busy structural steel fabrication environment delivering high-quality components for major construction projects across the UK. The successful candidate will be responsible for fabricating and welding structural steelwork to precise engineering specifications, ensuring all work meets required quality and safety standards. Key Responsibilities Read and interpret technical drawings and specifications Fabricate and assemble structural steel components including UB's, UC's, PFC's, and CHS's Carry out cutting, grinding, and welding tasks to required standards Operate fabrication machinery, hand tools, and measuring equipment safely and effectively Ensure all work meets dimensional accuracy and quality requirements Operate lifting equipment including overhead cranes Maintain a safe, clean, and organised working environment Work collaboratively with supervisors and team members to meet production targets Follow all health & safety procedures and wear correct PPE at all times Skills, Experience & Qualifications Previous experience in structural steel fabrication is essential Ability to read and understand engineering drawings Strong welding and metalworking skills Fabrication/welding qualification preferred but not essential Strong attention to detail and commitment to quality Good understanding of workshop health & safety practices Reliable, punctual, and hardworking with a strong team ethic Good communication skills and ability to work effectively as part of a team Salary & Benefits Salary is competitive and dependent on experience. Benefits include: 4 Night working week Company pension scheme Sick pay scheme Health plan Cycle to Work scheme Sharesave scheme Option to purchase additional holidays Apply If you are an experienced Fabricator Welder looking for a long-term opportunity within a busy structural steel environment, we would like to hear from you.

We are currently recruiting for an experienced MAG Welder to join a busy structural steel fabrication workshop. The successful candidate will be responsible for carrying out high-quality vertical fillet and butt welds on structural steel components, ensuring all work meets required quality standards and fabrication drawings. Key Responsibilities Perform MIG welding on structural steel sections and assemblies. Carry out vertical fillet and butt welds to specified welding procedures and standards. Read and interpret fabrication and engineering drawings. Prepare materials and components prior to welding. Inspect welds to ensure compliance with quality requirements. Work closely with fabricators and workshop personnel to meet production targets. Maintain welding equipment and ensure a safe working environment. Adhere to all workshop health and safety procedures. Requirements Essential Proven experience as a MAG Welder within a structural steel fabrication environment. Ability to produce high-quality vertical fillet and butt welds . Competent in reading and interpreting fabrication drawings. Strong understanding of welding symbols and specifications. Experience working with structural steel sections and heavy fabrication. Good attention to detail and commitment to quality. Desirable Relevant welding qualifications or coding certificates. Experience working to BS EN welding standards. Overhead crane or forklift experience. Previous experience in a high-volume fabrication workshop.

We are currently seeking experienced Groundworkers / Civils Operatives to join a major infrastructure project in Rotherham. This is an excellent opportunity for individuals with substation or utilities experience to work on a long-term civils package with immediate starts available. Working as part of an established site team, you will be involved in a range of groundworks and civil engineering activities supporting the delivery of critical infrastructure works. The Role Duties will include: Installation of surface water, foul water and oily water drainage systems Installation of HV and LV ducting, draw pits and precast troughs Excavation works and safe digging in accordance with HSG47 Placement of blinding and concrete to foundations Backfilling and compaction of excavations Hand digging and trial hole excavation Vehicle marshalling and banksman duties Operating plant including dumpers and rollers General civils and groundworks activities as required Requirements To be considered, candidates must hold: HSG47 Substation 2-Day Certification CPCS or NPORS 360 Excavator Ticket CPCS or NPORS Dumper Ticket Slinger / Signaller Certification Previous experience working on civil engineering, utilities, power or substation projects Full PPE What's on Offer? 27.00 per hour Minimum 8 weeks' work with the potential for extension Immediate start available Opportunity to work on a major infrastructure project Consistent hours and a well-established site team Please note: Due to client requirements, applications will only be considered from candidates who hold all of the essential certifications listed above. If you meet the criteria and are available to start, we'd like to hear from you.

Locations: Birmingham Epsom Glasgow Leeds Sector: Transmission & Distribution Power & Energy Net Zero Infrastructure Working Pattern: Hybrid (minimum 3 days in office/site per week) Shape the Future of Energy Infrastructure We are seeking experienced Electrical Engineers with a passion for power systems, electrical engineering, and the transition to Net Zero. This is an exciting opportunity to join a growing Power & Energy team delivering critical substation design projects across the UK and internationally. Working with major clients including National Grid, SSEN Transmission, and other leading energy organisations, you will contribute to projects spanning Front-End Engineering Design (FEED) through to Detailed Design across electricity transmission and distribution networks. This role offers excellent professional development, exposure to high-profile infrastructure projects, and ongoing support towards Chartership. The Role As a Senior Electrical Engineer, you will play a key role within a multi-disciplinary engineering team, providing technical leadership across a range of HV substation and primary plant design projects. You will work collaboratively with clients, suppliers, subcontractors, and internal teams to ensure the successful delivery of high-quality engineering solutions. Key Responsibilities Operate in a senior capacity within the Electrical Engineering team Build and maintain strong client and stakeholder relationships Interface directly with clients to understand requirements and support project delivery Lead FEED studies and Detailed Design activities for T&D projects Provide technical oversight and quality assurance across engineering deliverables Support bid preparation, tender submissions, and project planning activities Review and coordinate HV plant design aspects including: Layouts and elevations Maintenance access drawings Earthing design and reports Mechanical interlocking HV busbar calculations Technical specifications for HV equipment Coordinate with suppliers, subcontractors, and multidisciplinary teams Lead and participate in design reviews and hazard review meetings Conduct site visits where required Support business development and identify client opportunities Act as Principal Designer Representative where required About You We are looking for motivated engineers who are passionate about delivering innovative engineering solutions and supporting the UK's energy transition. You Will Ideally Have: Experience in Electrical Engineering with a focus on Primary Plant or Substation Design Experience working on HV systems (experience up to 400kV preferred but not essential) A degree (minimum 2:2 BEng or equivalent) in: Electrical Engineering Energy Systems Renewable Energy Strong communication and stakeholder management skills A collaborative and customer-focused approach A commitment to continuous professional development An interest in working towards professional accreditation / Chartership The ability to work flexibly in hybrid and agile environments Why Join Us? Work on nationally significant energy infrastructure projects Be part of the transition towards a more sustainable energy future Gain exposure to major UK and international clients Ongoing training and structured career development Support towards Chartership and professional accreditation Collaborative and inclusive team culture Opportunities to work across diverse and technically challenging projects Apply Now If you are ready to take the next step in your engineering career and contribute to the future of sustainable energy infrastructure, we would love to hear from you.

Senior Substation Primary (HV Plant) Design Engineer - Contract (Inside IR35) UK - Epsom Birmingham Leeds Glasgow (Hybrid / Site Travel) Up to 65/hr (Umbrella) 12-month minimum contract We are recruiting for a Senior Substation Primary (HV Plant) Design Engineer to join a leading engineering team delivering major transmission and distribution substation projects across the UK. This is a senior role working across the full project lifecycle, from FEED through to detailed design and construction support , with responsibility for delivering high-quality HV substation primary plant design solutions. Key Responsibilities Lead and deliver HV substation primary plant design for transmission and distribution projects Produce and review HV substation layouts, elevations, and general arrangements Develop earthing designs, reports, and calculations Prepare and review HV plant technical specifications and equipment data sheets Carry out HV busbar calculations and design assessments Develop mechanical interlocking philosophies and maintenance access arrangements Support FEED, detailed design, and tender stages Review and manage technical tender packages and supplier submissions Participate in design reviews, hazard studies, and technical workshops Coordinate with multidisciplinary teams, suppliers, and subcontractors Provide technical support during construction and commissioning stages Support junior engineers through mentoring and technical guidance Attend client meetings and occasional site visits Requirements Degree in Electrical Engineering or equivalent Strong experience in HV substation primary plant design Experience working on transmission and distribution projects (up to 400kV desirable) Familiarity with utility standards (e.g. National Grid, SPEN, SSEN or equivalent) Experience delivering FEED and detailed design packages Strong understanding of HV electrical systems and design principles Experience working in multidisciplinary engineering environments Ability to review technical design packages and manage quality assurance Skills & Attributes Strong technical leadership capability Excellent communication and stakeholder engagement skills Experience working in consultancy or EPC environments Ability to support tendering and technical proposal work Collaborative and proactive approach to engineering delivery Comfortable working across office, remote, and site environments Willingness to travel when required What's on Offer Major UK transmission and substation infrastructure projects Full lifecycle engineering exposure (FEED to commissioning support) Senior technical leadership role with real project influence Flexible hybrid working across UK office locations Opportunity to work within a high-performing multidisciplinary team If you are an experienced HV Substation Primary Plant Engineer looking for a senior contract opportunity with strong technical scope and responsibility, please apply or get in touch for more information.

Job Title: Groundworker x2 Location: Oxford Project: Thames Water Site We are currently seeking 2 experienced Groundworkers for works on a Thames Water project in Oxford for at least 2 months. Key Responsibilities: Laying push-fit DI (Ductile Iron) pipework Installing flanged DI pipework Installation of ducting General groundworks associated with utility and civil engineering projects Working safely and efficiently in accordance with site requirements Requirements: Proven experience in laying push-fit and flanged DI pipework Experience installing ducting and carrying out general groundworks Ability to work as part of a team on a live utility/water project Valid CSCS card (preferred/required if applicable) Thames Water Passport Relevant tickets and water industry experience advantageous

We are seeking an experienced and highly motivated Principal Controls Engineer to lead the design, development, integration, and delivery of control and automation systems across the HS2 programme. The successful candidate will provide technical leadership for all aspects of industrial control systems, SCADA, PLCs, Building Management Systems (BMS), telemetry, and integrated station and tunnel control solutions. Working within a multidisciplinary MEICA environment, you will be responsible for ensuring that control systems are safe, reliable, compliant, and fully integrated with mechanical and electrical infrastructure. This is a senior technical role requiring strong engineering leadership, stakeholder management, and experience delivering complex control systems within rail, transportation, infrastructure, or critical environment projects. Key Responsibilities Technical Leadership Act as the lead technical authority for controls, automation, and SCADA systems across allocated HS2 projects. Provide technical direction and mentoring to Controls Engineers and Design Engineers. Establish engineering standards, design methodologies, and best practices for control systems delivery. Support the Engineering Manager in developing engineering capability and technical excellence within the business. Controls & Automation Design Lead the design and specification of: PLC-based control systems SCADA systems Building Management Systems (BMS) Tunnel Ventilation Control Systems (TVCS) Station Control Systems Integrated Operational Control Systems Telemetry and remote monitoring systems Networked industrial communications systems Energy monitoring and management systems Develop control philosophies, functional design specifications, cause and effect matrices, and system architecture documents. Review and approve control panel designs, software architecture, I/O schedules, and network topologies. System Integration Manage interfaces between controls systems and: Mechanical systems Electrical distribution systems Fire and life safety systems Communications systems Security systems Asset management platforms Ensure seamless integration of third-party systems and equipment. Lead multidisciplinary design coordination activities and technical workshops. Design Assurance & Compliance Ensure compliance with: HS2 Technical Standards Railway interoperability requirements BS EN and IEC standards Cyber security requirements Functional safety standards CDM Regulations 2015 Client specifications and contractual obligations Lead technical reviews, design assurance activities, and engineering approvals. Support hazard identification, risk assessments, and safety assurance processes. Project Delivery Manage controls engineering activities throughout the project lifecycle from concept design through commissioning and handover. Monitor engineering progress, budgets, and resource requirements. Review subcontractor and supplier technical submissions. Support procurement activities and factory acceptance testing (FAT). Testing & Commissioning Lead controls system testing and commissioning strategies. Witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and integrated system testing. Support dynamic testing, operational readiness, and project handover activities. Resolve complex technical issues during commissioning and operation. Stakeholder Management Act as the primary controls engineering interface with clients, consultants, supply chain partners, and project stakeholders. Present technical solutions and engineering proposals to senior management and clients. Support bids, tenders, and technical submissions for future opportunities. Skills, Knowledge & Experience Essential Degree qualified in Control Systems Engineering, Electrical Engineering, Automation Engineering, or a related discipline. Minimum 10 years' experience in industrial controls, automation, SCADA, or systems engineering. Proven experience delivering major infrastructure, rail, transportation, utilities, or critical facilities projects. Strong understanding of: PLC programming principles SCADA architectures Industrial networking Control panel design Instrumentation systems BMS and integrated control systems Functional safety concepts Experience managing multidisciplinary engineering interfaces. Strong understanding of engineering assurance and governance processes. Excellent communication and leadership skills. Desirable Previous experience on HS2, Network Rail, Crossrail, London Underground, or major infrastructure projects. Chartered Engineer (CEng) status or working towards chartership. Membership of a relevant professional institution (IET, InstMC, Engineering Council, etc.). Experience with: Siemens PCS7, WinCC, TIA Portal Schneider EcoStruxure Rockwell Automation platforms Wonderware / AVEVA systems Ignition SCADA OPC and industrial communication protocols IEC 61508 / IEC 61511 Functional Safety IEC 62443 Industrial Cyber Security Key Competencies Technical Leadership Controls & Automation Expertise Systems Integration Engineering Assurance Problem Solving & Decision Making Stakeholder Management Commercial Awareness Risk Management Team Development & Mentoring Project Delivery Focus Health, Safety & Environmental Responsibilities Promote and lead a positive safety culture. Ensure all control systems are designed with safety and operational resilience at the forefront. Support safe-by-design principles and compliance with CDM Regulations. Contribute to environmental sustainability and energy-efficient engineering solutions. Performance Measures Delivery of controls engineering packages to programme and budget. Successful completion of design assurance and approval milestones. Compliance with HS2 and industry standards. Quality and reliability of commissioned control systems. Effective management of technical risk and system integration challenges. Client and stakeholder satisfaction. Development and mentoring of engineering team members.

We are seeking an experienced and driven Senior Electrical Engineer to join our Rail & Infrastructure Engineering team supporting the delivery of the HS2 programme. The successful candidate will lead the design, coordination, and technical delivery of electrical systems across complex rail and infrastructure projects. Working within a multidisciplinary MEICA environment, you will provide technical expertise throughout the project lifecycle, from concept and detailed design through installation, testing, commissioning, and handover. This role requires strong technical capability, leadership skills, and the ability to manage multiple stakeholders while ensuring designs are compliant, efficient, and buildable. Key Responsibilities Electrical Engineering Design Lead the design and development of electrical engineering solutions for major infrastructure and rail projects. Prepare and review: Electrical calculations Technical specifications Design reports Load assessments Protection studies Cable sizing calculations Earthing and bonding studies Technical drawings and schematics Design and coordinate systems including: LV power distribution systems Small power installations Internal and external lighting systems Emergency lighting systems Standby power systems UPS systems Earthing and lightning protection systems Building services electrical systems Electrical infrastructure associated with stations, tunnels, and operational facilities Technical Leadership Provide technical guidance and mentoring to Electrical Engineers, Graduate Engineers, and Design Technicians. Review and approve engineering deliverables to ensure technical accuracy and compliance. Support the development of engineering standards, procedures, and best practices. Assist with resource planning and technical capability development within the engineering team. Design Coordination & Integration Coordinate electrical designs with mechanical, controls, civil, structural, architectural, and systems engineering disciplines. Participate in multidisciplinary design reviews and technical workshops. Manage design interfaces and resolve technical conflicts across project disciplines. Ensure effective implementation of BIM and digital engineering processes. Design Assurance & Compliance Ensure all designs comply with: HS2 Technical Standards BS 7671 (IET Wiring Regulations) Building Regulations Relevant British and European Standards CDM Regulations 2015 Client and project specifications Participate in design assurance activities, including IDC/IDR reviews and technical approvals. Lead design risk assessments and support safety-by-design initiatives. Project Delivery Manage electrical engineering activities throughout all project phases. Monitor design progress against programme milestones and budgets. Review supplier and subcontractor technical submissions. Support procurement activities and equipment selection. Provide technical support to construction and commissioning teams. Testing & Commissioning Support the development of testing and commissioning strategies. Review commissioning documentation and test procedures. Attend Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and integrated systems testing. Assist with fault diagnosis, technical issue resolution, and final project handover. Stakeholder Management Act as a key engineering interface with clients, consultants, contractors, and supply chain partners. Attend project meetings and provide technical updates to project teams and senior management. Support tender submissions, technical proposals, and business development opportunities. Skills, Knowledge & Experience Essential Degree qualified in Electrical Engineering, Building Services Engineering, or a related engineering discipline. Minimum 5-10 years' experience in electrical engineering design within infrastructure, rail, transportation, utilities, or building services environments. Strong understanding of: LV electrical distribution systems Lighting design Earthing and bonding Power quality and protection systems Electrical installation design Testing and commissioning processes Experience producing and reviewing technical calculations and design documentation. Familiarity with engineering assurance and design review processes. Strong communication and stakeholder management skills. Ability to lead technical work packages and mentor junior engineers. Desirable Previous experience on HS2, Network Rail, London Underground, Crossrail, or major infrastructure projects. Chartered Engineer (CEng) or Incorporated Engineer (IEng) status, or actively working towards professional registration. Membership of a relevant professional institution such as the IET. Experience using: Amtech / Trimble ProDesign ETAP Dialux Relux AutoCAD Revit MEP Navisworks Knowledge of BIM Level 2 and digital engineering delivery. Understanding of NEC contracts and project delivery frameworks. Key Competencies Technical Excellence Engineering Leadership Design Coordination Problem Solving and Decision Making Risk Management Stakeholder Engagement Commercial Awareness Communication Skills Team Development and Mentoring Project Delivery Focus Health, Safety & Environmental Responsibilities Promote a positive health, safety, and environmental culture. Ensure engineering solutions incorporate safe-by-design principles. Support compliance with CDM Regulations and project safety requirements. Identify and mitigate engineering risks throughout project delivery. Contribute to sustainability and energy-efficient design initiatives. Performance Measures Delivery of electrical design packages to programme, budget, and quality requirements. Successful completion of engineering assurance reviews. Compliance with HS2 and project technical standards. Effective management of technical risks and design changes. Positive client and stakeholder feedback. Successful support of construction, testing, and commissioning activities. Development and mentoring of junior engineering staff.

Senior Mechanical Engineer - Rail & Infrastructure (HS2) Shape the Future of UK Infrastructure Are you an experienced Mechanical Design Engineer ready to leave a lasting legacy on the UK's largest infrastructure project? We are seeking a Senior Mechanical Engineer to join our world-class Rail & Infrastructure Engineering team. In this pivotal role, you will lead the technical delivery, coordination, and assurance of complex mechanical systems for the landmark HS2 programme . Working within a dynamic, multidisciplinary MEICA environment, you will take innovative engineering solutions from initial concept all the way through to testing, commissioning, and handover. If you thrive on solving complex engineering interfaces, managing high-profile stakeholders, and mentoring the next generation of engineering talent, this is your opportunity to elevate your career. Key Responsibilities Technical Design Leadership: Lead the development and review of complex mechanical engineering solutions, including HVAC, tunnel ventilation, pumping stations, drainage, and fire suppression systems. Engineering Assurance & Compliance: Take ownership of mechanical calculations (hydraulic, ventilation, pressure loss) and ensure all designs rigorously comply with HS2 Technical Standards, Building Regulations, CIBSE Guidelines, and CDM Regulations (2015). Multidisciplinary Integration: Lead Inter-Disciplinary Coordination and Reviews (IDC/IDR), collaborating closely with electrical, civil, structural, architectural, and systems engineering teams to deliver fully integrated, buildable solutions. Project & Package Management: Manage mechanical engineering work packages throughout the project lifecycle, monitoring progress against programme milestones, reviewing subcontractor technical submissions, and supporting value engineering initiatives. Team Development: Act as a technical mentor to junior engineers, graduates, and design technicians, driving technical excellence and capability within the team. Testing & Commissioning: Support the development of testing and commissioning strategies, attending Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to ensure seamless asset handover. What We Are Looking For Essential Experience: Degree qualified in Mechanical Engineering, Building Services Engineering, or a closely related discipline. 5-10 years' experience in mechanical engineering design within a major infrastructure, rail, transportation, or heavy building services environment. Deep technical knowledge of HVAC, tunnel/smoke ventilation, public health, and pumping systems . Proven track record of navigating complex design assurance, risk assessment, and hazard review processes . Exceptional communication skills with the ability to manage senior client interfaces and lead multidisciplinary workshops. Desirable Attributes: Chartered Engineer ( CEng ) status or actively working towards professional registration with IMechE or CIBSE. Prior experience on major rail programmes (e.g., HS2, Network Rail, London Underground, Crossrail ). Familiarity with digital engineering tools and BIM environments ( Revit MEP, Navisworks, Hevacomp, IES VE ). Understanding of NEC contracts and infrastructure delivery models. What's in it for You? Beyond the opportunity to play a leading role on a generational infrastructure project, we offer a culture that genuinely values your technical expertise and professional growth. Career Progression: Dedicated pathway to Principal Engineer / Technical Director with fully funded support for achieving/maintaining Chartership. Flexible Working: A hybrid model balancing collaborative office/site time with independent home working. Comprehensive Benefits: Competitive pension scheme, private healthcare, generous annual leave allowance, and corporate wellness perks. Apply Today Ready to take ownership of some of the most complex mechanical engineering challenges in the UK? Click 'Apply Now' to submit your CV and a brief cover letter outlining your experience on major infrastructure projects. Alternatively, reach out directly for a confidential discussion about the role.

Steel Erector/Fitter - Lambeth Road Our client is seeking an experienced Steel Erector/Fitter to join a team working on a steelwork project based in Central London. The successful candidate will be responsible for carrying out a range of primary and secondary steelwork installations across the project. Duties will predominantly involve beam alterations and beam installations . Due to the nature of the work, applicants must demonstrate a high level of attention to detail and be able to work safely and effectively as part of a team. Working Hours Monday to Friday 07:00 - 15:00 Requirements Valid CSCS Card Valid PTS (Personal Track Safety) Previous steel erection/fitting experience Strong commitment to health and safety standards If you meet the above requirements and are available for work on this project, we would like to hear from you.

Skilled Operative - BESS Project Location: Leeds Rate: 28.50 per hour Job Type: Contract Sector: Renewable Energy / Battery Energy Storage Systems (BESS) The Opportunity We are currently recruiting for a Skilled Operative to join a major Battery Energy Storage System (BESS) project based in Leeds. This is an excellent opportunity to work on a large-scale renewable energy infrastructure project, supporting the construction and installation of critical electrical and civil infrastructure. The successful candidate will have previous experience working within BESS, electrical infrastructure, utilities, energy, or power generation environments and be comfortable carrying out a range of civil and site-based activities. Key Responsibilities Installation of ducting and associated civil infrastructure. Assisting with cable installation and cable pulling activities. Supporting electrical infrastructure installation works. Carrying out general site duties as required. Assisting with trenching, backfilling, and reinstatement activities. Working safely around HV/LV electrical infrastructure. Ensuring all works are completed in accordance with project specifications and health & safety requirements. Maintaining a safe, clean, and organised work area. Supporting supervisors and site management to ensure programme deadlines are achieved. Essential Requirements Valid CSCS Card or CPCS Card. Previous experience working on BESS, electrical infrastructure, utilities, power, or energy projects. Experience carrying out ducting, cable pulling, and general civil works. Strong understanding of site health and safety procedures. Ability to work effectively as part of a team. Reliable, punctual, and safety-conscious approach to work. Desirable Qualifications SHEA Power. First Aid at Work. SSSTS. Additional plant or utility-related certifications. Experience working on National Grid, DNO, substation, or renewable energy projects. What's on Offer? 28.50 per hour. Opportunity to work on a major renewable energy infrastructure project. Long-term project potential. Exposure to the rapidly growing BESS and energy storage sector. Supportive site team and professional working environment. Apply Now If you have experience working within electrical infrastructure, utilities, power, or BESS environments and are looking for your next contract opportunity, we would like to hear from you.

We are currently seeking an experienced BIM Coordinator to join a leading M&E Engineering company supporting works on the HS2 project in Birmingham. Based out of our London office, the successful candidate will take a leading role in the coordination, management, and delivery of BIM processes, models, and project information across large-scale infrastructure and rail projects. This is an excellent opportunity to work on one of the UK's most high-profile infrastructure projects within a fast-paced and collaborative engineering environment, helping to drive BIM excellence across multidisciplinary teams. Key Responsibilities Lead BIM coordination activities for mechanical and electrical building services packages. Manage and coordinate federated 3D BIM models across multiple disciplines. Conduct clash detection and model validation using BIM coordination software, ensuring issues are identified and resolved efficiently. Coordinate closely with design engineers, project managers, subcontractors, and site teams to ensure accurate and timely model delivery. Ensure BIM deliverables comply with project requirements, client standards, HS2 specifications, and industry best practice. Facilitate and participate in BIM coordination meetings, design reviews, and technical workshops. Monitor model quality, data integrity, and adherence to project BIM Execution Plans (BEPs). Manage model revisions, information exchanges, and Common Data Environment (CDE) processes. Support the implementation and maintenance of BIM standards, workflows, and procedures in line with ISO 19650 and company requirements. Provide guidance and technical support to BIM Technicians and project teams on BIM processes and software usage. Requirements Proven experience working as a BIM Coordinator within M&E Building Services, Engineering, or Construction environments. Strong proficiency in Revit MEP , Navisworks , and AutoCAD . Experience coordinating BIM deliverables on large-scale construction, rail, infrastructure, or commercial projects. Strong understanding of BIM workflows, clash detection, model federation, and information management processes. Knowledge of BIM standards, including BIM Level 2 and ISO 19650 principles. Ability to interpret technical drawings, engineering specifications, and project requirements. Excellent communication, organisational, and stakeholder management skills. Ability to work collaboratively within multidisciplinary project teams. Desirable Previous experience working on HS2 , rail, or major infrastructure projects. Experience using Common Data Environments (e.g., Autodesk Construction Cloud, BIM 360, ProjectWise, Asite). Knowledge of BIM Execution Plans (BEPs), Employer's Information Requirements (EIRs), and project information management processes. Experience mentoring or overseeing BIM Technicians and junior team members. Previous experience within an M&E contractor, engineering consultancy, or specialist subcontractor environment.