Signway Supplies (Datchett) Limited
Basingstoke, UK
Job description
To install road traffic signs, posts, street name plates and other associated street furniture to the required standards.
Key Duties & Responsibilities
· To work in small teams of 2/3 installing signage to the clients specifications
· Assist with vehicle loading, including breaker pack, disc cutter etc.
· Ensuring load is correct, all goods, tools, ladders, clips, posts and signs are onboard and secured and the vehicle is not overloaded
· Load/unload vehicles upon return to base in preparation for following days work
· Attend any site inductions that are required
· Depending on qualification, operate specific machinery in a safe manner to assist with the installation of signs. Do not operate any equipment that you are not trained to use
· Carry out excavation works using appropriate mechanical/manual equipment
· Operation of specific machinery in a safe manner to assist with the installation of signs
· Ensure cat and genny scans are done before any digging commences
· Assist the supervisor at all times, planning tasks and be a step ahead e.g. getting clips ready, mix ballast, clean up working area etc.
· When required for specific sites, set out traffic management to the standards of Chapter 8 of the Traffic Signs Manual
· Comply with all H&S PPE requirements whilst on site and at base location
· Assess the site for any risks and notify supervisor of any risks not have picked up. These risks must be recorded in the daily risk assessment document
· To follow the requirements of the H&S policy thus ensuring their own personal Health and Safety and the safety of others around them
· Completion of jobs as per the paperwork provided
· Lock up tools and PPE in lockers
· Park the vehicle for the night and return the keys to the key box in the plant room
· Complete daily time sheets, including vibration exposure and return to line manager
· Completion of vehicle checks using the Fleet Manager app (or relevant documentation (VC40) if a mobile phone not available)
· Full use of Fleet Manager to carry out the following:
o Daily vehicle checks
o Fuel usage
o Mileage reporting
o Vehicle incident reporting
o Vehicle cleanliness (internal/external)
o Fuel receipts
· Full adherence to Company requirements in reporting:
o Accidents, incidents and near misses
o Cable strikes
o Vehicle faults
o Equipment faults
o PPE failures
Health and Safety
· To ensure that all health and safety requirements are followed in line with company policies and procedures.
Training, Learning & Development
· In addition to company identified training needs to take responsibility for own training, learning and development activities.
· Attend all mandatory training as required by the Company.
· Ensure the Installation Operatives are fully trained and signed off before operating any machinery.
Job Types: Full-time, Permanent
Job Type: Full-time
Benefits:
Health & wellbeing programme
Life insurance
On-site parking
Schedule:
Night shift
Overtime
Weekend availability
Jan 12, 2024
Full time
Job description
To install road traffic signs, posts, street name plates and other associated street furniture to the required standards.
Key Duties & Responsibilities
· To work in small teams of 2/3 installing signage to the clients specifications
· Assist with vehicle loading, including breaker pack, disc cutter etc.
· Ensuring load is correct, all goods, tools, ladders, clips, posts and signs are onboard and secured and the vehicle is not overloaded
· Load/unload vehicles upon return to base in preparation for following days work
· Attend any site inductions that are required
· Depending on qualification, operate specific machinery in a safe manner to assist with the installation of signs. Do not operate any equipment that you are not trained to use
· Carry out excavation works using appropriate mechanical/manual equipment
· Operation of specific machinery in a safe manner to assist with the installation of signs
· Ensure cat and genny scans are done before any digging commences
· Assist the supervisor at all times, planning tasks and be a step ahead e.g. getting clips ready, mix ballast, clean up working area etc.
· When required for specific sites, set out traffic management to the standards of Chapter 8 of the Traffic Signs Manual
· Comply with all H&S PPE requirements whilst on site and at base location
· Assess the site for any risks and notify supervisor of any risks not have picked up. These risks must be recorded in the daily risk assessment document
· To follow the requirements of the H&S policy thus ensuring their own personal Health and Safety and the safety of others around them
· Completion of jobs as per the paperwork provided
· Lock up tools and PPE in lockers
· Park the vehicle for the night and return the keys to the key box in the plant room
· Complete daily time sheets, including vibration exposure and return to line manager
· Completion of vehicle checks using the Fleet Manager app (or relevant documentation (VC40) if a mobile phone not available)
· Full use of Fleet Manager to carry out the following:
o Daily vehicle checks
o Fuel usage
o Mileage reporting
o Vehicle incident reporting
o Vehicle cleanliness (internal/external)
o Fuel receipts
· Full adherence to Company requirements in reporting:
o Accidents, incidents and near misses
o Cable strikes
o Vehicle faults
o Equipment faults
o PPE failures
Health and Safety
· To ensure that all health and safety requirements are followed in line with company policies and procedures.
Training, Learning & Development
· In addition to company identified training needs to take responsibility for own training, learning and development activities.
· Attend all mandatory training as required by the Company.
· Ensure the Installation Operatives are fully trained and signed off before operating any machinery.
Job Types: Full-time, Permanent
Job Type: Full-time
Benefits:
Health & wellbeing programme
Life insurance
On-site parking
Schedule:
Night shift
Overtime
Weekend availability
Here at Banner Plant , we operate a highly successful plant hire company. Our people are our passion and the driving force behind our achievements. Our hire fleet consists of exciting and modern machines that are imperative to the build process of today's skylines. Due to continued success and business growth, we are looking for a Plant Fitter to join our friendly team at our Dronfield depot. The Role You will play a vital role in the success of our busy depot with the responsibility for the inspection, testing, maintenance and repair of our company fleet, which includes mechanical plant equipment ranging from JCB tele-handlers, Bomag rollers, Kubota excavators and Terex and Thwaites dumpers. Key Responsibilities: You will identify and repair any faults or damage to the fleet equipment whilst accurately updating service records Estimate and advise on equipment repair costs Update workshop on items on stock Assist with deliveries and collections where required About You As part of our successful depot team, the successful applicant will demonstrate: Current experience or knowledge of plant maintenance operations; Experience with JCB tele-handlers, Bomag rollers, Kubota excavators, Terex and Thwaites dumpers desirable; Ability to inspect, test, maintain and repair plant equipment; An NVQ in Plant Operations or equivalent is an advantage or the drive and desire to complete the qualification; Possess strong attention to detail and accuracy with the ability to work effectively to strict deadlines. We are passionate about our people, and we are committed to your career development with us. You will have full access to our learning and development team, and we encourage you to consider your own training desires and make suggestions. We pride ourselves on fully supporting you in undertaking training and education to achieve your goals and objectives. Our Offer We believe that we have a competitive and progressive benefits package to help shape and support you both inside and outside of work: We pay you a competitive salary - we are committed to promoting equality and diversity and gender pay parity; We will provide you with access to electric and hybrid vehicle leasing through our salary sacrifice scheme; We share your personal and our financial success with our bonus scheme; We invest in your future with our pension plan provided by AVIVA; We protect your loved ones by providing a life assurance benefit based on multiples of salary; We support you when you might have health concerns for you or your family with our AVIVA Digital GP app; We will help you manage the balance of work and home with agile working (where possible) and flexibility to ensure that you can be there for those important life events; We give you 22 days of annual leave, with the ability to buy additional leave. We support a full business closure between Christmas and New Year, which does not require you to use your annual leave entitlement; We give you enhanced pay if you take leave due to becoming a parent however you become a parent; We support your career aspirations; we are committed to personal growth and internal talent development; We offer you access to our Cycle to Work salary sacrifice scheme, which includes access to e-bikes; We support you at times when you need external support with our Employee Assistance Programme. About Us Banner Plant is a long-established plant hire company offering a wide range of products and services for hire and sale. Our head office is in Dronfield, on the edge of Sheffield, with hire centres located in Dronfield (Sheffield), Chesterfield, Derby, Leeds, Leicester, Rotherham and Ossett. We're part of the Henry Boot Group of Companies . We've defined what makes working with us so special in our unique initiative, the 'Henry Boot Way'. This influences our culture and how we do things and, most importantly, strengthens the relationship between employer and employee. Equality and Diversity Since 1886 our business has always put our people first, so we're totally committed to offering an equal opportunity to every individual who joins us. The Henry Boot Group of Companies reserves the right to close this vacancy at any time if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Apr 01, 2024
Full time
Here at Banner Plant , we operate a highly successful plant hire company. Our people are our passion and the driving force behind our achievements. Our hire fleet consists of exciting and modern machines that are imperative to the build process of today's skylines. Due to continued success and business growth, we are looking for a Plant Fitter to join our friendly team at our Dronfield depot. The Role You will play a vital role in the success of our busy depot with the responsibility for the inspection, testing, maintenance and repair of our company fleet, which includes mechanical plant equipment ranging from JCB tele-handlers, Bomag rollers, Kubota excavators and Terex and Thwaites dumpers. Key Responsibilities: You will identify and repair any faults or damage to the fleet equipment whilst accurately updating service records Estimate and advise on equipment repair costs Update workshop on items on stock Assist with deliveries and collections where required About You As part of our successful depot team, the successful applicant will demonstrate: Current experience or knowledge of plant maintenance operations; Experience with JCB tele-handlers, Bomag rollers, Kubota excavators, Terex and Thwaites dumpers desirable; Ability to inspect, test, maintain and repair plant equipment; An NVQ in Plant Operations or equivalent is an advantage or the drive and desire to complete the qualification; Possess strong attention to detail and accuracy with the ability to work effectively to strict deadlines. We are passionate about our people, and we are committed to your career development with us. You will have full access to our learning and development team, and we encourage you to consider your own training desires and make suggestions. We pride ourselves on fully supporting you in undertaking training and education to achieve your goals and objectives. Our Offer We believe that we have a competitive and progressive benefits package to help shape and support you both inside and outside of work: We pay you a competitive salary - we are committed to promoting equality and diversity and gender pay parity; We will provide you with access to electric and hybrid vehicle leasing through our salary sacrifice scheme; We share your personal and our financial success with our bonus scheme; We invest in your future with our pension plan provided by AVIVA; We protect your loved ones by providing a life assurance benefit based on multiples of salary; We support you when you might have health concerns for you or your family with our AVIVA Digital GP app; We will help you manage the balance of work and home with agile working (where possible) and flexibility to ensure that you can be there for those important life events; We give you 22 days of annual leave, with the ability to buy additional leave. We support a full business closure between Christmas and New Year, which does not require you to use your annual leave entitlement; We give you enhanced pay if you take leave due to becoming a parent however you become a parent; We support your career aspirations; we are committed to personal growth and internal talent development; We offer you access to our Cycle to Work salary sacrifice scheme, which includes access to e-bikes; We support you at times when you need external support with our Employee Assistance Programme. About Us Banner Plant is a long-established plant hire company offering a wide range of products and services for hire and sale. Our head office is in Dronfield, on the edge of Sheffield, with hire centres located in Dronfield (Sheffield), Chesterfield, Derby, Leeds, Leicester, Rotherham and Ossett. We're part of the Henry Boot Group of Companies . We've defined what makes working with us so special in our unique initiative, the 'Henry Boot Way'. This influences our culture and how we do things and, most importantly, strengthens the relationship between employer and employee. Equality and Diversity Since 1886 our business has always put our people first, so we're totally committed to offering an equal opportunity to every individual who joins us. The Henry Boot Group of Companies reserves the right to close this vacancy at any time if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure.
Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including Transportation, Water, Power, Natural Resources, and Construction & Property.
Headquartered in London, we also have a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities.
Murphy employs around 3,500 engineers, professional managers and skilled operatives around the world. Together, we work as ‘One Murphy’ by directly delivering the people, plant and expertise needed to make projects a success.
There’s more to Murphy.
Site Manager - Durham
Welcome to REAL:
As part of our £1.2 billion East Coast Upgrade, we’re improving the power supply on the East Coast Main Line to enable faster, quieter and more environmentally friendly electric trains to run. The upgrade paves the way for the introduction of new trains, such as LNER’s Azuma and Hull Trains’ Paragon fleets
The REAL Alliance involves the installation of feeder and substations along the East Coast Main Line, capacity upgrades, new 132kv connection at Hambleton junction and upgrades to existing power supply connections
This is a fantastic opportunity for a Site Manager to join our project in Durham. You will be responsible for aspects of a small/medium sized project or several small projects with an indicative value of up to £1M-£15M.
What you will be doing
* To plan and deliver all work on a small/medium sized site or a few smaller sites, ensuring work is completed on time and to the defined standard.
* To ensure short and medium contract programmes are planned, reviewed and delivered.
* To monitor progress periodically against the project plan and monitor expenditure, resolving issues but may escalate critical operational issues to the Project Manager (if a larger site).
* Line management of Section Managers and other workflow supervisors.
* Provide periodic updates to clients on project/contract progress, typically operational in nature.
* Ensure project documentation & risk assessments are created, in place and reviewed as and when required.
* Review plant, labour and materials to ensure resources are in place for the short to medium term (1-3 months).
* Liaise with the Project Manager to resolve any technical issues outside of the scope of works.
* To comply with company standards, policies and procedures.
* Responsible for a contract with a turnover of up to £1M-£15M per annum.
* May contribute to procurement of resources but will not have direct financial responsibility.
Who we are looking for
* HNC Building Studies or a degree in Civil Engineering/Construction Management.
* Knowledge sufficient to attain Chartered level of ICE.
* Extensive background in site/contract management delivering contracts of similar value.
* Solid health and safety knowledge and will hold a health and safety related qualification.
* CSCS Card
* Able to work under pressure and meet deadlines.
* Good interpersonal skills with previous line management experience necessary
Feb 03, 2023
Permanent
J. Murphy & Sons Limited is a leading global, specialist engineering and construction company founded in 1951 that improves lives by delivering world-class infrastructure.
Operating in the United Kingdom, Ireland and Canada, we provide better engineered solutions to infrastructure sectors including Transportation, Water, Power, Natural Resources, and Construction & Property.
Headquartered in London, we also have a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Urban Infrastructure; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. We are specialists in delivering pipelines; design; marine; structural steel; tunnelling; fabrication; bridges and piling; and invest heavily in our substantial holding of plant; equipment and facilities.
Murphy employs around 3,500 engineers, professional managers and skilled operatives around the world. Together, we work as ‘One Murphy’ by directly delivering the people, plant and expertise needed to make projects a success.
There’s more to Murphy.
Site Manager - Durham
Welcome to REAL:
As part of our £1.2 billion East Coast Upgrade, we’re improving the power supply on the East Coast Main Line to enable faster, quieter and more environmentally friendly electric trains to run. The upgrade paves the way for the introduction of new trains, such as LNER’s Azuma and Hull Trains’ Paragon fleets
The REAL Alliance involves the installation of feeder and substations along the East Coast Main Line, capacity upgrades, new 132kv connection at Hambleton junction and upgrades to existing power supply connections
This is a fantastic opportunity for a Site Manager to join our project in Durham. You will be responsible for aspects of a small/medium sized project or several small projects with an indicative value of up to £1M-£15M.
What you will be doing
* To plan and deliver all work on a small/medium sized site or a few smaller sites, ensuring work is completed on time and to the defined standard.
* To ensure short and medium contract programmes are planned, reviewed and delivered.
* To monitor progress periodically against the project plan and monitor expenditure, resolving issues but may escalate critical operational issues to the Project Manager (if a larger site).
* Line management of Section Managers and other workflow supervisors.
* Provide periodic updates to clients on project/contract progress, typically operational in nature.
* Ensure project documentation & risk assessments are created, in place and reviewed as and when required.
* Review plant, labour and materials to ensure resources are in place for the short to medium term (1-3 months).
* Liaise with the Project Manager to resolve any technical issues outside of the scope of works.
* To comply with company standards, policies and procedures.
* Responsible for a contract with a turnover of up to £1M-£15M per annum.
* May contribute to procurement of resources but will not have direct financial responsibility.
Who we are looking for
* HNC Building Studies or a degree in Civil Engineering/Construction Management.
* Knowledge sufficient to attain Chartered level of ICE.
* Extensive background in site/contract management delivering contracts of similar value.
* Solid health and safety knowledge and will hold a health and safety related qualification.
* CSCS Card
* Able to work under pressure and meet deadlines.
* Good interpersonal skills with previous line management experience necessary
Midgard is the main contracting division of the +£600m turnover JRL Group and utilises all the company's in-house resources and facilities to provide clients with a bespoke constructionservice. We have gone back to the time when contractors carried out work themselves with a dedicated, reliable workforce and their own fleet of plant and equipment.
Due to continued growth we are seeking to recruit a Site Manager to join our team at Lots Road, Chelsea.
A Site Manager with experience managing a Basement area would be advantageous not beneficial.
Responsibilities:
* Assist in the provision of a safe, efficient and cost effective service stream on all areas of service delivery, ensuring the highest quality of work is provided in the timescales determined by the contract.
* Review method statements and risk assessments to ensure compliance with procedures, arrange and chair pre-start meetings with sub - contractors and attend hand - overmeeting with pre-construction team.
* Issue correct notices and relevant contractual correspondence to sub-contractors at the appropriate time.
* Instigate, control and run packages from contract award to handover within budgetary constraints.
* Manage designated packages to meet company objectives post-contract with an input into pre-contract requirements emphasising customer care and business excellence.
* Maintain accurate site diaries for all activities and highlight any risk items to appropriate manager.
* Control and monitor day works for subcontractors.
* Be aware of the production, on-going analysis & mitigation of project risks.
Benefits:
* Competitive salary, with confidence of working for an established and growing company.
* Company Pension Scheme.
* Private Healthcare.
* Opportunity for progression within the business.
* An opportunity to work on some of the nation's most exciting Construction projects.
* Dedicated Training & Development Department.
* A stimulating & dynamic environment.
* Newly refurbished Gym & Multi-purpose Studio in Head Office.
* In-house barista.
* Subsidised Cafeteria.
* Team bonding events.
* Sporting Events - perfect for the keen cyclist/runner.
With an ambitious strategy, we're poised for further growth and success, so if you're committed, talented and enthusiastic, the JRL Group is the right place for you
Jan 21, 2022
Permanent
Midgard is the main contracting division of the +£600m turnover JRL Group and utilises all the company's in-house resources and facilities to provide clients with a bespoke constructionservice. We have gone back to the time when contractors carried out work themselves with a dedicated, reliable workforce and their own fleet of plant and equipment.
Due to continued growth we are seeking to recruit a Site Manager to join our team at Lots Road, Chelsea.
A Site Manager with experience managing a Basement area would be advantageous not beneficial.
Responsibilities:
* Assist in the provision of a safe, efficient and cost effective service stream on all areas of service delivery, ensuring the highest quality of work is provided in the timescales determined by the contract.
* Review method statements and risk assessments to ensure compliance with procedures, arrange and chair pre-start meetings with sub - contractors and attend hand - overmeeting with pre-construction team.
* Issue correct notices and relevant contractual correspondence to sub-contractors at the appropriate time.
* Instigate, control and run packages from contract award to handover within budgetary constraints.
* Manage designated packages to meet company objectives post-contract with an input into pre-contract requirements emphasising customer care and business excellence.
* Maintain accurate site diaries for all activities and highlight any risk items to appropriate manager.
* Control and monitor day works for subcontractors.
* Be aware of the production, on-going analysis & mitigation of project risks.
Benefits:
* Competitive salary, with confidence of working for an established and growing company.
* Company Pension Scheme.
* Private Healthcare.
* Opportunity for progression within the business.
* An opportunity to work on some of the nation's most exciting Construction projects.
* Dedicated Training & Development Department.
* A stimulating & dynamic environment.
* Newly refurbished Gym & Multi-purpose Studio in Head Office.
* In-house barista.
* Subsidised Cafeteria.
* Team bonding events.
* Sporting Events - perfect for the keen cyclist/runner.
With an ambitious strategy, we're poised for further growth and success, so if you're committed, talented and enthusiastic, the JRL Group is the right place for you
Balfour Beatty are a leading company in the construction industry and provide vital services to the lives of millions of people across the UK and beyond. Here at Balfour Beatty, we take pride in the work we do and take pride in giving our employees the opportunity to make a difference in the world and create something they can be proud of.
The opportunity to create is all around you. Whatever your level, whatever your role, whatever the project, you'll be able to take initiative here and get stuck in. A major branch of our business is our Plant & Fleet Team, who provide the complete package of plant, vehicles, and equipment across our UK network.
Join our fabulous Plant & Fleet team as a Lifting Operations Trainer/Assessor working across the UK, where you will have the opportunity to be part of a highly skilled team and the opportunity to learn from some of the best in the industry.
Role purpose
To carry out all elements of Plant/Lifting Operations training, testing and assessments for internal staff, contractors and external customers.
and
To raise the skills, attitude, approach and performance levels of maintenance staff, plant operators and other support staff through the competency assessment procedure.
On a day-to-day basis you will:
* Establish additional training needs for the business.
* Conduct Training, Testing and Assessments UK wide.
* Develop appropriate training plans in compliance with company, client, and legislative requirements.
* Create Risk Assessments and Method Statements.
* Deliver training and testing to the highest standard internally/externally and across all schemes and awarding bodies to meet all standards/criteria/procedures and practices.
* Ensure all training and Assessments are delivered in accordance with all Health and Safety requirements.
* Maintain own occupational competencies to Train & Assess staff as required.
* Implement good practice in respect of OSH Education, Equal Opportunities, Safeguarding, Health and Safety, Child Protection and GDPR policies.
To join us in this role, you must have the following:
* NPORS Instructor Lifting categories (Slinger Signaller, Crane/Lift Supervisor, Overhead Crane, Lorry Loader)
* CPCS Tester categories (Slinger Signaller, Crane/Lift Supervisor, Overhead Crane, Lorry Loader)
* SSSTS or SMTS – CITB or Managing Safely – IOSH
* (A1) Assessing Candidates Using a Range of Methods – Level 3
* Workplace Trainer skills – City and Guilds or equivalent (L Units)
* Driving license.
* Good understanding of knowledge and performance criteria in relation to awarding bodies
* Experience of working in a construction site environment
* A strong operational background in Plant/Lifting operations
* Experience in developing and creating training packages
* Experience creating Method Statements and Risk Assessments
* Computer literate (experience using Microsoft applications Outlook/Word/Excel/Power Point).
What we can do for you:
* Competitive salary.
* Provide training to develop your skills further.
* Generous Annual Leave allowance.
* Pension scheme.
* Paid overtime.
* Subsistence provided where applicable.
If you are inspired to be part of the Balfour Beatty family and create something to be proud of, join us as an Lifting Operations Trainer/Assessor. As well as experiencing benefits such as joining our pension scheme, share plan and enjoying our generous annual leave allowance, we offer so much more. Here at Balfour Beatty, you have the opportunity to work and learn from some of the most skilled workers in the industry and be respected as a valued member of the team. Apply today
Jan 21, 2022
Permanent
Balfour Beatty are a leading company in the construction industry and provide vital services to the lives of millions of people across the UK and beyond. Here at Balfour Beatty, we take pride in the work we do and take pride in giving our employees the opportunity to make a difference in the world and create something they can be proud of.
The opportunity to create is all around you. Whatever your level, whatever your role, whatever the project, you'll be able to take initiative here and get stuck in. A major branch of our business is our Plant & Fleet Team, who provide the complete package of plant, vehicles, and equipment across our UK network.
Join our fabulous Plant & Fleet team as a Lifting Operations Trainer/Assessor working across the UK, where you will have the opportunity to be part of a highly skilled team and the opportunity to learn from some of the best in the industry.
Role purpose
To carry out all elements of Plant/Lifting Operations training, testing and assessments for internal staff, contractors and external customers.
and
To raise the skills, attitude, approach and performance levels of maintenance staff, plant operators and other support staff through the competency assessment procedure.
On a day-to-day basis you will:
* Establish additional training needs for the business.
* Conduct Training, Testing and Assessments UK wide.
* Develop appropriate training plans in compliance with company, client, and legislative requirements.
* Create Risk Assessments and Method Statements.
* Deliver training and testing to the highest standard internally/externally and across all schemes and awarding bodies to meet all standards/criteria/procedures and practices.
* Ensure all training and Assessments are delivered in accordance with all Health and Safety requirements.
* Maintain own occupational competencies to Train & Assess staff as required.
* Implement good practice in respect of OSH Education, Equal Opportunities, Safeguarding, Health and Safety, Child Protection and GDPR policies.
To join us in this role, you must have the following:
* NPORS Instructor Lifting categories (Slinger Signaller, Crane/Lift Supervisor, Overhead Crane, Lorry Loader)
* CPCS Tester categories (Slinger Signaller, Crane/Lift Supervisor, Overhead Crane, Lorry Loader)
* SSSTS or SMTS – CITB or Managing Safely – IOSH
* (A1) Assessing Candidates Using a Range of Methods – Level 3
* Workplace Trainer skills – City and Guilds or equivalent (L Units)
* Driving license.
* Good understanding of knowledge and performance criteria in relation to awarding bodies
* Experience of working in a construction site environment
* A strong operational background in Plant/Lifting operations
* Experience in developing and creating training packages
* Experience creating Method Statements and Risk Assessments
* Computer literate (experience using Microsoft applications Outlook/Word/Excel/Power Point).
What we can do for you:
* Competitive salary.
* Provide training to develop your skills further.
* Generous Annual Leave allowance.
* Pension scheme.
* Paid overtime.
* Subsistence provided where applicable.
If you are inspired to be part of the Balfour Beatty family and create something to be proud of, join us as an Lifting Operations Trainer/Assessor. As well as experiencing benefits such as joining our pension scheme, share plan and enjoying our generous annual leave allowance, we offer so much more. Here at Balfour Beatty, you have the opportunity to work and learn from some of the most skilled workers in the industry and be respected as a valued member of the team. Apply today
This challenging and exciting opportunity requires an individual with demonstrable experience of producing AutoCAD drawings and details, and with a qualification and background from any area of the civil, structural or geotechnical engineering, geology or earth sciences, or building and construction sector.
Our client is a market leader in the design, supply and installation of all forms of specialist civil, structural and geotechncial engineering, piling, foundations and ground engineering techniques. They are vastly experienced in delivering innovative solutions for a wide range of sectors and clients, including industrial, commercial and residential, with additional works such as steel and sheet piled basements, retaining walls and structures, temporary works, and permanent works and bracing, for the rail, road, infrastructure and ports and harbours arena.
Our client owns and operates a vast fleet of highly specialised and state of the art rigs, equipment, plant and machinery. The delivery of high quality solutions and providing excellent value to clients are central to the company's mission, vision and values, and is seen as critical to the continued success of the business. Their staff are tirelessly dedicated to delivering the highest standards of project excellence for a wide and varied client base, which in turn ensures they continue to be a competitive force in the industry.
Overview
Due to continued expansion, an abundant pipeline of works, and the recent award of a number of long-term, major contracts, our client is now looking to appoint a CAD Engineer for their head office operations.
Reporting to the Design Manager and working alongside a team of Project Engineers, the successful candidate will have the day to day responsibility for the timely production of calculations, drawings, designs and schedules for a wide variety of contracts utilising all the company’s systems, products and services, and all in accordance with current industry standards and procedures. You will additionally support the work winning and operations teams for the company.
The Role
* Maintain a good level of understanding and general knowledge of the construction industry, in particular respect to current civil and structural design, techniques and processes
* Assist in the processing of drawings, calculations and designs required to achieve the published budget and targets set by the company
* Carry out appraisals of projects in relation to the design brief in order to obtain all information required to complete design processes
* Carry out administrative duties for design projects, including project booking, creating hard files, QA documents, filing correspondence, and updating and archiving the department’s documents, files and databases
* Produce AutoCAD drawings, calculations and schedules for all assigned projects
* Organise and issue drawings, calculations and schedules to all relevant parties
* Keep the project team informed of progress on all design works undertaken, and immediately report any problems, issues or challenges should they arise
* Prioritise awarded projects in the design process to ensure targeted timescales are achieved
* Assist with providing layouts and quantities for projects being tendered by the estimating team
* Any other duties relevant to the role as directed by the Design Manager
* Attend review meetings with the relevant teams, developing a pro-active focus upon client expectations and contract delivery
* Co-ordinate and add value at the pre, in-situ and post contract stage of projects
The Person
* Fully conversant and a competent user of AutoCAD and Microsoft Excel, with a relevant industry qualification (civil, structural or geotechnical engineering, geology or earth sciences, or building and construction etc.)
* Knowledge of, and the ability to work to, current industry standards and regulations
* Excellent IT skills with demonstrable practical knowledge of AutoCAD, key Microsoft applications and various other specialist design software
* Good problem-solving skills and the ability to pay close attention to detail
* An organised approach to work and the ability to meet deadlines
* Drive, enthusiasm and the ability to work on your own initiative to overcome challenges
* Flexible work ethic and being a team player is critical
* Demonstrable experience of meeting deadlines set by and for individual clients
* Ability to work on multiple projects simultaneously
* Strong interpersonal and communication skills are required, coupled with an ability to form effective relationships with partners and delivery team members to ensure you perform under pressure
* Client orientated and flexible in your approach, you will possess the strategic and creative insight to understand the full range of opportunities contained within invitations to tender and be willing to challenge the norm
* You will know what good looks like, for all submissions, and have hands on experience in supporting and advising on the technical and design aspects of contracts in a timely manner
An attractive basic salary (permanent) plus extensive benefits package is on offer to the successful candidate, along with longevity of work given the company’s market leading status in the UK and their commitment to continued profitable growth
Jun 08, 2020
Permanent
This challenging and exciting opportunity requires an individual with demonstrable experience of producing AutoCAD drawings and details, and with a qualification and background from any area of the civil, structural or geotechnical engineering, geology or earth sciences, or building and construction sector.
Our client is a market leader in the design, supply and installation of all forms of specialist civil, structural and geotechncial engineering, piling, foundations and ground engineering techniques. They are vastly experienced in delivering innovative solutions for a wide range of sectors and clients, including industrial, commercial and residential, with additional works such as steel and sheet piled basements, retaining walls and structures, temporary works, and permanent works and bracing, for the rail, road, infrastructure and ports and harbours arena.
Our client owns and operates a vast fleet of highly specialised and state of the art rigs, equipment, plant and machinery. The delivery of high quality solutions and providing excellent value to clients are central to the company's mission, vision and values, and is seen as critical to the continued success of the business. Their staff are tirelessly dedicated to delivering the highest standards of project excellence for a wide and varied client base, which in turn ensures they continue to be a competitive force in the industry.
Overview
Due to continued expansion, an abundant pipeline of works, and the recent award of a number of long-term, major contracts, our client is now looking to appoint a CAD Engineer for their head office operations.
Reporting to the Design Manager and working alongside a team of Project Engineers, the successful candidate will have the day to day responsibility for the timely production of calculations, drawings, designs and schedules for a wide variety of contracts utilising all the company’s systems, products and services, and all in accordance with current industry standards and procedures. You will additionally support the work winning and operations teams for the company.
The Role
* Maintain a good level of understanding and general knowledge of the construction industry, in particular respect to current civil and structural design, techniques and processes
* Assist in the processing of drawings, calculations and designs required to achieve the published budget and targets set by the company
* Carry out appraisals of projects in relation to the design brief in order to obtain all information required to complete design processes
* Carry out administrative duties for design projects, including project booking, creating hard files, QA documents, filing correspondence, and updating and archiving the department’s documents, files and databases
* Produce AutoCAD drawings, calculations and schedules for all assigned projects
* Organise and issue drawings, calculations and schedules to all relevant parties
* Keep the project team informed of progress on all design works undertaken, and immediately report any problems, issues or challenges should they arise
* Prioritise awarded projects in the design process to ensure targeted timescales are achieved
* Assist with providing layouts and quantities for projects being tendered by the estimating team
* Any other duties relevant to the role as directed by the Design Manager
* Attend review meetings with the relevant teams, developing a pro-active focus upon client expectations and contract delivery
* Co-ordinate and add value at the pre, in-situ and post contract stage of projects
The Person
* Fully conversant and a competent user of AutoCAD and Microsoft Excel, with a relevant industry qualification (civil, structural or geotechnical engineering, geology or earth sciences, or building and construction etc.)
* Knowledge of, and the ability to work to, current industry standards and regulations
* Excellent IT skills with demonstrable practical knowledge of AutoCAD, key Microsoft applications and various other specialist design software
* Good problem-solving skills and the ability to pay close attention to detail
* An organised approach to work and the ability to meet deadlines
* Drive, enthusiasm and the ability to work on your own initiative to overcome challenges
* Flexible work ethic and being a team player is critical
* Demonstrable experience of meeting deadlines set by and for individual clients
* Ability to work on multiple projects simultaneously
* Strong interpersonal and communication skills are required, coupled with an ability to form effective relationships with partners and delivery team members to ensure you perform under pressure
* Client orientated and flexible in your approach, you will possess the strategic and creative insight to understand the full range of opportunities contained within invitations to tender and be willing to challenge the norm
* You will know what good looks like, for all submissions, and have hands on experience in supporting and advising on the technical and design aspects of contracts in a timely manner
An attractive basic salary (permanent) plus extensive benefits package is on offer to the successful candidate, along with longevity of work given the company’s market leading status in the UK and their commitment to continued profitable growth
MOBILE/WORKSHOP PLANT FITTER (PLANT HIRE)
Do you have experience working on Diggers, Dumpers, Excavators, Compressors,Telehandlers and Rollers? Then this could be your next career move
Benefits
£28 - £30k DOE + Van + Overtime
The Company
Our client is a leading plant hire company, focused on providing a professional service to their customers within the industry, supplying a range of construction plant equipment.
The company has plenty of industry experience, maintaining their high reputation and consistency and are looking to expand into bigger and better premises.
The Role
Our client is recruiting for a dynamic and driven fitter with previous experience repairing, servicing and maintaining a wide range of plant equipment on site and in the workshop in accordance with company guidelines.
You will be expected to visit customer sites to carry out repairs to breakdowns throughout South London, Surrey, Kent and surrounding locations, but also carry out any remedial works required at the depot within a workshop environment.
The ideal candidate will be self-motivated with a high level of customer service skills with a flexible working attitude and the drive to progress their career.
Responsibilities
* Experience of working on plant equipment including diggers, dumpers, excavators, compressors, telehandlers, rollers etc.
* To maintain all machinery in optimum operating condition by servicing, diagnosing and repairing both on and off site.
* Develop a professional relationship with internal and external clients.
* Ensure a high standard of Health and Safety for both colleagues and customers.
* Complete all paperwork, time sheets and job cards efficiently within a given time scale.
* To promote the company in a professional manor at all times.
* To maintain Health and Safety to company and HSE regulations.
Requirements
* Ability to identify faults quickly and repair accordingly
* Good communication skills
* PC literate
* Knowledge of diesel engines
* NVQ Level 2 in Plant Maintenance or time served
* Full driving licence is essential.
The ideal candidate would be located in the following areas; Mitcham, Croydon, Sutton, Epsom, Kingston Upon Thames, Bromley, Leatherhead, Banstead, Westcott, Reigate, Caterham, Edenbridge, East Grinstead, Bromley, Dartford, Lewisham, Esher, Byfleet, Crawley, New Malden, Thornton Heath or surrounding areas
Jan 22, 2017
MOBILE/WORKSHOP PLANT FITTER (PLANT HIRE)
Do you have experience working on Diggers, Dumpers, Excavators, Compressors,Telehandlers and Rollers? Then this could be your next career move
Benefits
£28 - £30k DOE + Van + Overtime
The Company
Our client is a leading plant hire company, focused on providing a professional service to their customers within the industry, supplying a range of construction plant equipment.
The company has plenty of industry experience, maintaining their high reputation and consistency and are looking to expand into bigger and better premises.
The Role
Our client is recruiting for a dynamic and driven fitter with previous experience repairing, servicing and maintaining a wide range of plant equipment on site and in the workshop in accordance with company guidelines.
You will be expected to visit customer sites to carry out repairs to breakdowns throughout South London, Surrey, Kent and surrounding locations, but also carry out any remedial works required at the depot within a workshop environment.
The ideal candidate will be self-motivated with a high level of customer service skills with a flexible working attitude and the drive to progress their career.
Responsibilities
* Experience of working on plant equipment including diggers, dumpers, excavators, compressors, telehandlers, rollers etc.
* To maintain all machinery in optimum operating condition by servicing, diagnosing and repairing both on and off site.
* Develop a professional relationship with internal and external clients.
* Ensure a high standard of Health and Safety for both colleagues and customers.
* Complete all paperwork, time sheets and job cards efficiently within a given time scale.
* To promote the company in a professional manor at all times.
* To maintain Health and Safety to company and HSE regulations.
Requirements
* Ability to identify faults quickly and repair accordingly
* Good communication skills
* PC literate
* Knowledge of diesel engines
* NVQ Level 2 in Plant Maintenance or time served
* Full driving licence is essential.
The ideal candidate would be located in the following areas; Mitcham, Croydon, Sutton, Epsom, Kingston Upon Thames, Bromley, Leatherhead, Banstead, Westcott, Reigate, Caterham, Edenbridge, East Grinstead, Bromley, Dartford, Lewisham, Esher, Byfleet, Crawley, New Malden, Thornton Heath or surrounding areas