An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out HVAC, Planned Maintenance (PPMs), Reactive works M&E repairs and able to carry out minor projects/installations for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations Key Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Respond to Reactive Works to include all Mechanical, Electrical, various plumbing tasks and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Demonstrate clear understanding of the gas regulations. Mechanical skill bias with basic electrical knowledge. Reasonable understanding and a proactive approach to the following other trade skills. Qualifications ESSENTIAL ACS in Domestic & Commercial Gas with elements. Oil OFTEC servicing. Plumbing tasks, Toilet repairs, water heater repairs etc. Small General fabric repairs PERSONEL SPECIFICATION Delivery of service excellence with a can do attitude. Willingness to go the extra mile. PREFERABLE Reasonable competence or a basic understanding of the other trades. Fabric: Basic carpentry (door repairs, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs. Miscellaneous: meter reading; emergency light testing; water temperature recording; alarm testing. DESIRABLE BUT NOT ESSENTIAL IPAF PASMA, Unvented hot water systems OIL/ OFTEC AC (FGAS). HETAS BSth Edition Minor building/fabric items; controls/BMS as requested when necessary If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £36,000 to £38,000
Apr 19, 2024
Full time
An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out HVAC, Planned Maintenance (PPMs), Reactive works M&E repairs and able to carry out minor projects/installations for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations Key Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Respond to Reactive Works to include all Mechanical, Electrical, various plumbing tasks and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Demonstrate clear understanding of the gas regulations. Mechanical skill bias with basic electrical knowledge. Reasonable understanding and a proactive approach to the following other trade skills. Qualifications ESSENTIAL ACS in Domestic & Commercial Gas with elements. Oil OFTEC servicing. Plumbing tasks, Toilet repairs, water heater repairs etc. Small General fabric repairs PERSONEL SPECIFICATION Delivery of service excellence with a can do attitude. Willingness to go the extra mile. PREFERABLE Reasonable competence or a basic understanding of the other trades. Fabric: Basic carpentry (door repairs, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs. Miscellaneous: meter reading; emergency light testing; water temperature recording; alarm testing. DESIRABLE BUT NOT ESSENTIAL IPAF PASMA, Unvented hot water systems OIL/ OFTEC AC (FGAS). HETAS BSth Edition Minor building/fabric items; controls/BMS as requested when necessary If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £36,000 to £38,000
Are you an Electrical Engineer, seeking your next role with a leading FM contractor? My client has an immediate opportunity for a static Electrical Engineer to join their Swansea based team on a permanent basis. The successful applicant will work as part of a multi-skilled workforce delivering PPM and Reactive Maintenance on a large static site. Duties React to breakdown maintenance requests within the required SLA's. Complete repairs to modular UPS systems Test and diagnose power quality issues including harmonic distortion using on-site power analyser. Provide emergency response standby, call out. Undertake Upgrade & Install work. Respond to work interruptions, outages or emergencies consistent with the SLA. Ensure all critical related engineering maintenance documentation & records are kept updated. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Understand and interpret technical drawings / instructions / processes & O&M's Ensure completion of all reactive Helpdesk Requests Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly. Ensure that financial processes are adhered to at all times. Complete an incident report for all abnormal incidents affecting systems availability. Requirements 18th Edition Electrical Wiring Regulations Experience Testing and Inspection of electrical systems is desirable. Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution & cooling. Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Experience and understanding of HVAC systems. To apply, please forward a copy of your CV Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Apr 19, 2024
Full time
Are you an Electrical Engineer, seeking your next role with a leading FM contractor? My client has an immediate opportunity for a static Electrical Engineer to join their Swansea based team on a permanent basis. The successful applicant will work as part of a multi-skilled workforce delivering PPM and Reactive Maintenance on a large static site. Duties React to breakdown maintenance requests within the required SLA's. Complete repairs to modular UPS systems Test and diagnose power quality issues including harmonic distortion using on-site power analyser. Provide emergency response standby, call out. Undertake Upgrade & Install work. Respond to work interruptions, outages or emergencies consistent with the SLA. Ensure all critical related engineering maintenance documentation & records are kept updated. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works. Understand and interpret technical drawings / instructions / processes & O&M's Ensure completion of all reactive Helpdesk Requests Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly. Ensure that financial processes are adhered to at all times. Complete an incident report for all abnormal incidents affecting systems availability. Requirements 18th Edition Electrical Wiring Regulations Experience Testing and Inspection of electrical systems is desirable. Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution & cooling. Experience working with building management systems including fault finding and operator use. Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams. Experience and understanding of HVAC systems. To apply, please forward a copy of your CV Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
The Role: Engineering Team Leader Sector: Engineering / High End Residential Location: Central London Salary: Up to £38,000 pa DOE What you need and what you will do: We are looking for an experienced Engineering Team Leader ideally someone who comes from a technical background and loves all things M&E! This is an amazing opportunity to work with a high-end residential property company who strive in providing a 5 service for their HNW guests. As an Engineering Team Leader you will be responsible for the day-to-day operations on site ensuring reactive and planned maintenance tasks are completed. Please note This role does involve a mixture of both on the tools and office based! All about you! Able to assist with sub-contractor management and monitoring Qualifications: Electrical or Plumbing Desirable but not essential Strong knowledge regarding HVAC, BMS, Plant rooms and swimming pool facilities Able to use a CAFM system to assist delivery and achieve SLA s Flexibility to work 1 weekend a month To be considered, please send you CV to (url removed) Please be aware that this is a specialist role and only candidates with the applicable experience can be considered. To view all our vacancies, go to, (url removed) You must be able to live and work in the UK without restriction.
Apr 18, 2024
Full time
The Role: Engineering Team Leader Sector: Engineering / High End Residential Location: Central London Salary: Up to £38,000 pa DOE What you need and what you will do: We are looking for an experienced Engineering Team Leader ideally someone who comes from a technical background and loves all things M&E! This is an amazing opportunity to work with a high-end residential property company who strive in providing a 5 service for their HNW guests. As an Engineering Team Leader you will be responsible for the day-to-day operations on site ensuring reactive and planned maintenance tasks are completed. Please note This role does involve a mixture of both on the tools and office based! All about you! Able to assist with sub-contractor management and monitoring Qualifications: Electrical or Plumbing Desirable but not essential Strong knowledge regarding HVAC, BMS, Plant rooms and swimming pool facilities Able to use a CAFM system to assist delivery and achieve SLA s Flexibility to work 1 weekend a month To be considered, please send you CV to (url removed) Please be aware that this is a specialist role and only candidates with the applicable experience can be considered. To view all our vacancies, go to, (url removed) You must be able to live and work in the UK without restriction.
Are you a talented engineer with expertise in mechanical, electrical, and plumbing (MEP) systems, as well as gas installations? Our client is a leading provider of engineering solutions, and play a pivotal role in delivering high-quality services to our clients in Norwich and the surrounding areas. Responsibilities: Mechanical System Maintenance: Perform maintenance, repairs, and installations on mechanical systems, including HVAC, boilers, pumps, and ventilation systems, to ensure optimal performance and efficiency. Electrical System Support: Provide support for electrical systems, such as lighting, power distribution, and control panels, by troubleshooting issues and implementing solutions as needed. Plumbing and Pipework: Undertake plumbing tasks, including pipework installations, repairs, and maintenance, to ensure the smooth operation of water supply and drainage systems. Gas Installations and Maintenance: Carry out gas installations, inspections, and repairs in compliance with safety regulations and industry standards, ensuring the safe operation of gas-fired appliances and equipment. MEP System Integration: Coordinate with other trades and contractors to integrate MEP systems seamlessly into building designs and construction projects, ensuring compatibility and efficiency. Emergency Response: Respond promptly to emergency calls and breakdowns, diagnosing faults and implementing solutions to minimize downtime and disruption to client operations. Compliance and Regulations: Ensure all work is carried out in accordance with relevant health and safety regulations, building codes, and industry standards, maintaining compliance at all times. Client Interaction: Build strong relationships with clients by providing excellent service, communicating effectively, and addressing any concerns or queries promptly and professionally. Requirements: Proven experience as a multi-skilled engineer, with a mechanical bias and expertise in MEP systems and gas installations. Relevant qualifications in mechanical engineering, plumbing, gas fitting, or a related field. Gas Safe registered for working with gas installations (preferred). Strong diagnostic and problem-solving skills, with the ability to identify and resolve issues efficiently. Excellent communication and interpersonal skills, with the ability to work well both independently and as part of a team. Full UK driving licence and willingness to travel to client sites across Norwich and surrounding areas. Setsquare is committed to equality in the workplace and is an equal opportunity employer. Setsquare is acting as an Employment Business in relation to this vacancy.
Apr 16, 2024
Contract
Are you a talented engineer with expertise in mechanical, electrical, and plumbing (MEP) systems, as well as gas installations? Our client is a leading provider of engineering solutions, and play a pivotal role in delivering high-quality services to our clients in Norwich and the surrounding areas. Responsibilities: Mechanical System Maintenance: Perform maintenance, repairs, and installations on mechanical systems, including HVAC, boilers, pumps, and ventilation systems, to ensure optimal performance and efficiency. Electrical System Support: Provide support for electrical systems, such as lighting, power distribution, and control panels, by troubleshooting issues and implementing solutions as needed. Plumbing and Pipework: Undertake plumbing tasks, including pipework installations, repairs, and maintenance, to ensure the smooth operation of water supply and drainage systems. Gas Installations and Maintenance: Carry out gas installations, inspections, and repairs in compliance with safety regulations and industry standards, ensuring the safe operation of gas-fired appliances and equipment. MEP System Integration: Coordinate with other trades and contractors to integrate MEP systems seamlessly into building designs and construction projects, ensuring compatibility and efficiency. Emergency Response: Respond promptly to emergency calls and breakdowns, diagnosing faults and implementing solutions to minimize downtime and disruption to client operations. Compliance and Regulations: Ensure all work is carried out in accordance with relevant health and safety regulations, building codes, and industry standards, maintaining compliance at all times. Client Interaction: Build strong relationships with clients by providing excellent service, communicating effectively, and addressing any concerns or queries promptly and professionally. Requirements: Proven experience as a multi-skilled engineer, with a mechanical bias and expertise in MEP systems and gas installations. Relevant qualifications in mechanical engineering, plumbing, gas fitting, or a related field. Gas Safe registered for working with gas installations (preferred). Strong diagnostic and problem-solving skills, with the ability to identify and resolve issues efficiently. Excellent communication and interpersonal skills, with the ability to work well both independently and as part of a team. Full UK driving licence and willingness to travel to client sites across Norwich and surrounding areas. Setsquare is committed to equality in the workplace and is an equal opportunity employer. Setsquare is acting as an Employment Business in relation to this vacancy.
An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out basic HVAC, L8 Legionella inspections, basic Planned Maintenance (PPMs), basic plumbing Reactive works M&E repairs and able to carry out minor projects for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations. Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Carry out legionella testing & provide written costed solutions to all defects identified. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Basic HVAC systems, Safe Systems of work Understanding of Service level agreements (SLA) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade skills: Basic HVAC Mechanical skill. Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Mechanical skill bias. Reasonable understanding and a proactive approach to the following other trade skills. Fabric: Basic carpentry (door hanging, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs and gutter cleaning Training / Qualifications Knowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of workKnowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of work If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £32,000 to £34,000
Apr 15, 2024
Full time
An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out basic HVAC, L8 Legionella inspections, basic Planned Maintenance (PPMs), basic plumbing Reactive works M&E repairs and able to carry out minor projects for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations. Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Carry out legionella testing & provide written costed solutions to all defects identified. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Basic HVAC systems, Safe Systems of work Understanding of Service level agreements (SLA) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade skills: Basic HVAC Mechanical skill. Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Mechanical skill bias. Reasonable understanding and a proactive approach to the following other trade skills. Fabric: Basic carpentry (door hanging, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs and gutter cleaning Training / Qualifications Knowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of workKnowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of work If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £32,000 to £34,000
Our client has an exciting opportunity for a Building Services Manager to join their team. Location: London, UK Salary: £60K PA Job Type: Fill-Time, Permanent About The Company: Our client is a university located in London, dedicated to fostering academic excellence and providing exceptional educational experiences to its diverse student body. Committed to maintaining top-tier facilities and infrastructure, our client is seeking a talented and experienced Building Services Manager to join their team and oversee the maintenance and operations of their campus buildings. Building Services Manager - The Role: As the Building Services Manager, you will play a pivotal role in ensuring the efficient functioning of the university's infrastructure, including mechanical, electrical, plumbing, and other building systems. You will lead a team of skilled technicians and engineers to deliver high-quality maintenance services while adhering to industry standards and regulatory requirements. Building Services Manager - Key Responsibilities: - Manage the day-to-day operations of building services, including HVAC systems - Develop and implement preventive maintenance programs to maximise equipment lifespan and minimise downtime - Conduct regular inspections and audits to identify potential issues and ensure compliance with health and safety regulations - Oversee budgeting and financial planning for building services, ensuring cost-effective solutions without compromising quality - Liaise with academic departments, administrative offices, and other stakeholders to understand their facility needs and provide responsive support Building Services Manager - You: - Bachelor's degree in building services engineering, or equivalent - In-depth knowledge of mechanical systems, as well as relevant regulations and standards (e.g., Health and Safety Executive, Building Regulations) - Strong project management skills, with the ability to prioritise tasks, allocate resources, and meet deadlines effectively - Excellent leadership and communication abilities, with a track record of building and motivating high-performing teams - Proficiency in relevant software tools, AUTOCAD, Hevacomp Building Services Manager - Benefits: - Competitive salary and benefits package - Generous holiday entitlement - Professional development opportunities - Health insurance - Relocation assistance To submit your application for this exciting Building Services Manager opportunity, please click 'Apply' now.
Apr 14, 2024
Full time
Our client has an exciting opportunity for a Building Services Manager to join their team. Location: London, UK Salary: £60K PA Job Type: Fill-Time, Permanent About The Company: Our client is a university located in London, dedicated to fostering academic excellence and providing exceptional educational experiences to its diverse student body. Committed to maintaining top-tier facilities and infrastructure, our client is seeking a talented and experienced Building Services Manager to join their team and oversee the maintenance and operations of their campus buildings. Building Services Manager - The Role: As the Building Services Manager, you will play a pivotal role in ensuring the efficient functioning of the university's infrastructure, including mechanical, electrical, plumbing, and other building systems. You will lead a team of skilled technicians and engineers to deliver high-quality maintenance services while adhering to industry standards and regulatory requirements. Building Services Manager - Key Responsibilities: - Manage the day-to-day operations of building services, including HVAC systems - Develop and implement preventive maintenance programs to maximise equipment lifespan and minimise downtime - Conduct regular inspections and audits to identify potential issues and ensure compliance with health and safety regulations - Oversee budgeting and financial planning for building services, ensuring cost-effective solutions without compromising quality - Liaise with academic departments, administrative offices, and other stakeholders to understand their facility needs and provide responsive support Building Services Manager - You: - Bachelor's degree in building services engineering, or equivalent - In-depth knowledge of mechanical systems, as well as relevant regulations and standards (e.g., Health and Safety Executive, Building Regulations) - Strong project management skills, with the ability to prioritise tasks, allocate resources, and meet deadlines effectively - Excellent leadership and communication abilities, with a track record of building and motivating high-performing teams - Proficiency in relevant software tools, AUTOCAD, Hevacomp Building Services Manager - Benefits: - Competitive salary and benefits package - Generous holiday entitlement - Professional development opportunities - Health insurance - Relocation assistance To submit your application for this exciting Building Services Manager opportunity, please click 'Apply' now.
Senior Electrical or Mechanical Design Engineer Senior Electrical or Mechanical Design Engineer - Up to £65,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will also have excellent communication skills with clients to ensure the projects are going as smoothly as possible. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. If this role is not for you, but you know someone who might be looking, please let us know, and you can receive up to £250 as a referal bonus. #
Apr 13, 2024
Full time
Senior Electrical or Mechanical Design Engineer Senior Electrical or Mechanical Design Engineer - Up to £65,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will also have excellent communication skills with clients to ensure the projects are going as smoothly as possible. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. If this role is not for you, but you know someone who might be looking, please let us know, and you can receive up to £250 as a referal bonus. #
Mechanical Design Engineer Mechanical Design Engineer - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or in relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Apr 13, 2024
Full time
Mechanical Design Engineer Mechanical Design Engineer - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role, you will know how to use Auto CAD in design or in relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and installing controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Electrical Design Engineer Electrical Design Engineering - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and install controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Apr 13, 2024
Full time
Electrical Design Engineer Electrical Design Engineering - Up to £33,000 plus Benefits The company In this exciting new opportunity, you will be working for an organisation new to Ely with offices in Ipswich as well. Being part of this team will give you a chance to work on different projects, such as residential and commercial, as well as bespoke design within Building Services. You will get the opportunity to work closely with a director who has over 20 years of experience within the industry. Your role In this role you will know how to use Auto CAD in design or relevant software, either in the mechanical or electrical field. You will be able to design new engineering products and processes. Analyse prototype data and retest if needed. You will be able to research new product ideas and methods. Improve existing products and processes. With in design and install controls for systems like heating, ventilation, and lighting. You will be ensuring compliance with the industry's safety standards. Also, you will be maintaining accurate records of results found as well as records surrounding your design. What we are looking for The successful candidate will be responsible for the design, installation, operation, and monitoring of technical services in buildings, including HVAC engineering, mechanical, electrical, and plumbing systems, to ensure safe, comfortable, and environmentally friendly operation. You will have experience in the field and be able to undertake the technical and commercial management of projects that provide engineering design solutions to maintain and enhance the quality of the environment and community. They will ensure that business, client, and end-user needs are considered and work within financial and safety constraints. You will work closely with your manager and director to ensure that projects are finished and to an excellent understanding. We are looking for someone who is looking to start their career within Building Services Design or looking to change their organisation to one with a family feel to it. Benefits include Flexible working hours Overtime hours paid. 31 days holiday entitlement including bank holidays. 45ppm mile for business use. Free car parking or reimbursed parking charges Health care plan Mobile phone and laptop/tablet for business use 4% company pension under review for years spent within the business. Please do get in contact on the details below to find out more about this new exciting opportunity or if you are not looking for this type of role but are looking for a new career, please do reach out to me on the details below. #
Technical Services Manager Location: RAF Croughton Salary: £38,000- £42,000 Plus Car / Allowance Girling Jones are seeking a Technical Services Manager Mechanical/HVAC to manage and support 9 engineers in the PPM & reactive maintenance tasks across RAF Croughton. The Technical Services Manager will provide key operational support to the business, delivering a great service to our customers, whilst ensuring works are completed on time and within service requirements. You will be expected to take a direct interest in the Health & Safety of yourself and others who may be affected by your work activities and will be required to complete any training required for the role. This role will see you manage around 10 Mechanical/HVAC Engineers carrying out planned and reactive maintenance works around the site, as well as external contractors to ensure all work is carried out to a high standard and in compliance with contract requirements and key performance indicators. You will assist the Maintenance Manager with developing maintenance standards and processes, take responsibility for developing and reviewing Risk Assessments and Method Statements and lead the team by example, promoting an environment of positivity and a 'can-do' culture. What You Need To Do The Job As part of this role, you will be expected to provide technical advice and support to your team members and customers, and as such, it is important that you are an appropriately qualified Mechanical or HVAC Engineer. It is equally important that you have experience of managing or supervising engineering teams. You should have good knowledge of Health and Safety and hold COSHH and RIDDOR. This role will see you spend roughly 60% of your time being office based and 40% doing quality checks. You will not be on the tools as part of your day to day job. You must be IT literate, and confident in the use of Microsoft Exel, Powerpoint and Outlook. You will be responsible for reporting against KPIs and presenting back to the senior managers. You will need a full UK driving licence and the ability to pass SC Clearance which is a requirement for the role. What We Offer £38,000- £42,000 Company car/car allowance Single private medical cover Life assurance 2x base salary 25 days annual leave 6% employee matched pension contribution Rewards Hub
Apr 12, 2024
Full time
Technical Services Manager Location: RAF Croughton Salary: £38,000- £42,000 Plus Car / Allowance Girling Jones are seeking a Technical Services Manager Mechanical/HVAC to manage and support 9 engineers in the PPM & reactive maintenance tasks across RAF Croughton. The Technical Services Manager will provide key operational support to the business, delivering a great service to our customers, whilst ensuring works are completed on time and within service requirements. You will be expected to take a direct interest in the Health & Safety of yourself and others who may be affected by your work activities and will be required to complete any training required for the role. This role will see you manage around 10 Mechanical/HVAC Engineers carrying out planned and reactive maintenance works around the site, as well as external contractors to ensure all work is carried out to a high standard and in compliance with contract requirements and key performance indicators. You will assist the Maintenance Manager with developing maintenance standards and processes, take responsibility for developing and reviewing Risk Assessments and Method Statements and lead the team by example, promoting an environment of positivity and a 'can-do' culture. What You Need To Do The Job As part of this role, you will be expected to provide technical advice and support to your team members and customers, and as such, it is important that you are an appropriately qualified Mechanical or HVAC Engineer. It is equally important that you have experience of managing or supervising engineering teams. You should have good knowledge of Health and Safety and hold COSHH and RIDDOR. This role will see you spend roughly 60% of your time being office based and 40% doing quality checks. You will not be on the tools as part of your day to day job. You must be IT literate, and confident in the use of Microsoft Exel, Powerpoint and Outlook. You will be responsible for reporting against KPIs and presenting back to the senior managers. You will need a full UK driving licence and the ability to pass SC Clearance which is a requirement for the role. What We Offer £38,000- £42,000 Company car/car allowance Single private medical cover Life assurance 2x base salary 25 days annual leave 6% employee matched pension contribution Rewards Hub
Technical Facilities Manager Job Summary Working for a leading UK managing agent, this role provides leadership for the entire site's facilities, encompassing both hard and soft services. You'll be responsible for ensuring best practices are followed across the laboratories managed by both the company and its tenants. Key Responsibilities: Manage procurement of facility contracts in collaboration with central support. Continuously review operations to optimize efficiency and cost-effectiveness. Oversee all aspects of health and safety on-site, including basic Construction Design and Management (CDM) principles. Lead and manage service line teams, taking accountability for overall facility operations. Manage the site's FM services, budgeting, and data integrity. Ensure all maintenance and services are delivered while maintaining cost control and adhering to relevant regulations. Authorize all works, budgets, and supplier staff access. Act as the technical advisor and liaison between the supply chain, the client, and the site's operational teams. Skills and Qualifications: Proven experience managing facilities in a similar environment, with a strong understanding of mechanical and electrical (M&E) systems. Experience compiling and managing large service charge budgets. Proven ability to manage suppliers and contracts. Prior experience with project management is a plus. Experience complying with small-scale CDM regulations. Demonstrated experience in commercial property management (tenant/occupier or landlord side). Familiarity with laboratory, biological, chemical, and microbiology environments and standards. Proficiency in relevant software programs (e.g., Riskwise) and quality management systems (ISO 14001 & 9001). Strong understanding of building engineering, technical services, and maintenance. In-depth knowledge and ability to manage the maintenance of HVAC, mechanical, electrical, and pressure systems. Relevant engineering qualification or demonstrably equivalent experience. A relevant professional or technical qualification (e.g., BIFM, NEBOSH, IOSH) is preferred. Additional facilities management or laboratory management qualifications are a plus. Values and Behaviors: Strong commitment to excellent service delivery, working collaboratively with internal and external stakeholders. Excellent written and verbal communication skills, including report writing. Ability to prioritize tasks and deliver results for all stakeholders. Innovative problem-solving approach. Commitment to continuous learning and development. Excellent interpersonal and relationship-building skills, capable of communicating effectively at all levels. Salary: up to 50,000 per annum (depending on experience). Working Hours: 37.5 hours per week, Monday - Friday
Apr 12, 2024
Full time
Technical Facilities Manager Job Summary Working for a leading UK managing agent, this role provides leadership for the entire site's facilities, encompassing both hard and soft services. You'll be responsible for ensuring best practices are followed across the laboratories managed by both the company and its tenants. Key Responsibilities: Manage procurement of facility contracts in collaboration with central support. Continuously review operations to optimize efficiency and cost-effectiveness. Oversee all aspects of health and safety on-site, including basic Construction Design and Management (CDM) principles. Lead and manage service line teams, taking accountability for overall facility operations. Manage the site's FM services, budgeting, and data integrity. Ensure all maintenance and services are delivered while maintaining cost control and adhering to relevant regulations. Authorize all works, budgets, and supplier staff access. Act as the technical advisor and liaison between the supply chain, the client, and the site's operational teams. Skills and Qualifications: Proven experience managing facilities in a similar environment, with a strong understanding of mechanical and electrical (M&E) systems. Experience compiling and managing large service charge budgets. Proven ability to manage suppliers and contracts. Prior experience with project management is a plus. Experience complying with small-scale CDM regulations. Demonstrated experience in commercial property management (tenant/occupier or landlord side). Familiarity with laboratory, biological, chemical, and microbiology environments and standards. Proficiency in relevant software programs (e.g., Riskwise) and quality management systems (ISO 14001 & 9001). Strong understanding of building engineering, technical services, and maintenance. In-depth knowledge and ability to manage the maintenance of HVAC, mechanical, electrical, and pressure systems. Relevant engineering qualification or demonstrably equivalent experience. A relevant professional or technical qualification (e.g., BIFM, NEBOSH, IOSH) is preferred. Additional facilities management or laboratory management qualifications are a plus. Values and Behaviors: Strong commitment to excellent service delivery, working collaboratively with internal and external stakeholders. Excellent written and verbal communication skills, including report writing. Ability to prioritize tasks and deliver results for all stakeholders. Innovative problem-solving approach. Commitment to continuous learning and development. Excellent interpersonal and relationship-building skills, capable of communicating effectively at all levels. Salary: up to 50,000 per annum (depending on experience). Working Hours: 37.5 hours per week, Monday - Friday
Mechanical Shift Engineer Day Shifts Only Commercial FM industry Hounslow, West London 40,000 + Employment Package. Are you an experienced mechanical maintenance engineer? Do you have experience carrying out planned preventative maintenance (PPMs), fault finding and attending breakdowns within commercial properties / environments? Would a Shift role suit your lifestyle while still being able to avoid nights? If you answered yes to the above, we want to speak with you! We are actively recruiting for a Mechanical Maintenance Engineer to join the team within a leading UK transport hub in Hounslow, West London. Package: What is in it for you? Basic Salary: 40,000 Hours: 4 on, 4 off: 06:30am - 6:30pm. Holiday: 25 days paid annual leave (high for a shift role). Company pension Free on-site parking Paid overtime available Other company benefits. Duties: Planned Preventative Maintenance across Mechanical and HVAC equipment. Attending breakdowns, fault finding and carrying out reactive maintenance measures to Mechanical and HVAC equipment. Working with equipment such as: Air Handling Units (AHUs) / Fan Coil Units (FCUs) - coil cleans, filter cleans/changes, lubricating moving parts, replacing components etc, pump repairs / replacements, bearings, basic pipework, plumbing duties, 1st line faults to splits/multi splits, boilers, heat pumps, chillers etc. Logging in/out of jobs and updating job notes on company CAFM system, updating log-books and on-site compliance paperwork, adhering to company health and safety policy etc. Requirements: Must hold a mechanical qualification, ie: City and Guilds Level 2 or equivalent in Plumbing, Heating, Air Conditioning etc. We will also accept applications from individuals classed as "time served". Must have experience working on mechanical / hvac equipment within a commercial environment. Due to the size of the campus, a driving license would be highly beneficial. Does this sound of interest? Please submit a CV today and one of the team will give you a call to discuss.
Apr 12, 2024
Full time
Mechanical Shift Engineer Day Shifts Only Commercial FM industry Hounslow, West London 40,000 + Employment Package. Are you an experienced mechanical maintenance engineer? Do you have experience carrying out planned preventative maintenance (PPMs), fault finding and attending breakdowns within commercial properties / environments? Would a Shift role suit your lifestyle while still being able to avoid nights? If you answered yes to the above, we want to speak with you! We are actively recruiting for a Mechanical Maintenance Engineer to join the team within a leading UK transport hub in Hounslow, West London. Package: What is in it for you? Basic Salary: 40,000 Hours: 4 on, 4 off: 06:30am - 6:30pm. Holiday: 25 days paid annual leave (high for a shift role). Company pension Free on-site parking Paid overtime available Other company benefits. Duties: Planned Preventative Maintenance across Mechanical and HVAC equipment. Attending breakdowns, fault finding and carrying out reactive maintenance measures to Mechanical and HVAC equipment. Working with equipment such as: Air Handling Units (AHUs) / Fan Coil Units (FCUs) - coil cleans, filter cleans/changes, lubricating moving parts, replacing components etc, pump repairs / replacements, bearings, basic pipework, plumbing duties, 1st line faults to splits/multi splits, boilers, heat pumps, chillers etc. Logging in/out of jobs and updating job notes on company CAFM system, updating log-books and on-site compliance paperwork, adhering to company health and safety policy etc. Requirements: Must hold a mechanical qualification, ie: City and Guilds Level 2 or equivalent in Plumbing, Heating, Air Conditioning etc. We will also accept applications from individuals classed as "time served". Must have experience working on mechanical / hvac equipment within a commercial environment. Due to the size of the campus, a driving license would be highly beneficial. Does this sound of interest? Please submit a CV today and one of the team will give you a call to discuss.
An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out basic HVAC, L8 Legionella inspections, basic Planned Maintenance (PPMs), basic plumbing Reactive works M&E repairs and able to carry out minor projects for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations. Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Carry out legionella testing & provide written costed solutions to all defects identified. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Basic HVAC systems, Safe Systems of work Understanding of Service level agreements (SLA) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade skills: Basic HVAC Mechanical skill. Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Mechanical skill bias. Reasonable understanding and a proactive approach to the following other trade skills. Fabric: Basic carpentry (door hanging, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs and gutter cleaning Training / Qualifications Knowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of workKnowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of work If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £32,000 to £34,000
Apr 11, 2024
Full time
An established national Mechanical & Electrical Engineering and Facilities Services provider Job Details To carry out basic HVAC, L8 Legionella inspections, basic Planned Maintenance (PPMs), basic plumbing Reactive works M&E repairs and able to carry out minor projects for specific trade associated systems to a high level standard in accordance with the SFG20 or manufacturers recommendations. Accountabilities PPM in adherence to set HVAC engineering standards of excellence. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Carry out legionella testing & provide written costed solutions to all defects identified. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota. Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Tablet interface via the clients CAFM application & IT literate. Good customer interface skills. Understanding of Service level agreements (SLA) Basic HVAC systems, Safe Systems of work Understanding of Service level agreements (SLA) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade skills: Basic HVAC Mechanical skill. Demonstrate competence in all areas of your primary trade (with valid certification) Technical understanding of manufacturer s instructions & technical literature. Mechanical skill bias. Reasonable understanding and a proactive approach to the following other trade skills. Fabric: Basic carpentry (door hanging, shelf erecting etc); internal furniture, fittings and décor repairs; external fixtures and fittings repairs; emergency leak repairs and gutter cleaning Training / Qualifications Knowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of workKnowledge of L8 Legionella inspection requirements, Unvented hot water & HVAC systems, Safe Systems of work If you do not hear from us within seven days, then your application has not been successful on this occasion. We may however keep your details on file for any suitable future vacancies and contact you accordingly. £32,000 to £34,000
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an experienced Regional Building Performance & Energy Manager with an Engineering background to be part of a global team to deliver Energy-saving initiatives from end to end in region, based in London. Key Responsibilities: Oversee the operation and maintenance of cloud-based smart building platforms, ensuring their reliability and accuracy. Collaborate with IT and building automation teams to integrate smart building platforms with existing systems. Stay updated on emerging smart building technologies and recommend enhancements to improve performance. Utilize energy analytics tools to collect, analyse, and interpret data related to building performance and energy consumption. Identify trends, patterns, and opportunities for energy efficiency improvements and cost savings. Develop strategies, initiatives, and action plans to optimize building performance and reduce energy consumption. Establish key performance indicators (KPIs) to measure and monitor building performance metrics. Generate reports and presentations summarizing performance data, trends, and actionable recommendations. Present findings to stakeholders, including senior management, and provide guidance for decision-making processes. Collaborate with building operators, facility managers, and vendors to implement energy efficiency projects and initiatives. Foster strong relationships with internal and external stakeholders to drive alignment and support for energy conservation goals. Provide guidance and training to building operators and staff on utilizing smart building platforms effectively. Use Engineering expertise to provide technical oversight, project integration, and project management of initiatives that are executed. Maintain a thorough understanding of corporate energy strategy and legal, statutory, and technical issues that affect the client's premises. Keep abreast of Energy Market developments and changes, ensuring that the client complies with all Energy-Related Legislation. Develop and implement with the client, the overall strategy for energy requirements, to meet the strategic intent of the organisation and represent the Energy Department in all areas of the business. Promote policy and achievements to emphasize how they contribute to its success. Develop and implement strategic briefs for design guides /standards to meet the client objectives and brief client departments accordingly. Provide monitoring and verification through the full cycle of the project to achieve cost and energy-efficient solutions. Validate and challenge where necessary the consumption figures in relation to Utility Billing. Implement and maintain processes and procedures to achieve economic cost in use Maintain a current level of utility market intelligence. Plan, monitor, and achieve consumption/emission targets Qualifications and Experience: Minimum 5 years' experience in energy management Chartered Engineer or equivalent status in Building Services Engineering, mechanical, electrical, and related subjects An appropriate energy-related qualification or equivalent in building services engineering. (to Degree level or higher) NABERS, LEED, etc. certification is a plus. Extensive knowledge of the principal techniques and technologies which support the efficient use of energy. Competency in current benchmark techniques and statistical analysis Working knowledge of M&T software Project management experience Understand the principles behind HVAC, refrigeration, and Lighting operation and system design/integration. Extensive working knowledge of smart platforms, BMS, or similar software and control theory Capable of preparing fully costed energy efficiency proposals and reports Ability to carry out full energy surveys and feasibility studies of energy technologies. Knowledge of customer operations, business drivers, financials and specialist sources of information, and legislative requirements where necessary. About CBRE Global Workplace Solutions: As one of CBRE's core global businesses, Global Workplace Solutions (GWS) provides end-to-end services to occupier clients across the entire lifecycle of a building. Our teams help companies improve their operations and reduce costs, through expert facilities management, project management, real estate and energy and sustainability services. Our dedicated teams work across all industries, and support clients ranging from global Fortune 500 companies to single, iconic buildings. Application Process: Your application will be reviewed by our Talent Resourcing Team and you will be contacted if you have been successful in being short listed for the role. Taking into consideration the costs of sponsorship, the nature of the role and the financial resources of the account in question, we are unable to offer sponsorship for this role. No agencies please. Please note: the job title shown above may be different to local job titles used in our business and issued on any contract of employment.
Apr 10, 2024
Full time
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an experienced Regional Building Performance & Energy Manager with an Engineering background to be part of a global team to deliver Energy-saving initiatives from end to end in region, based in London. Key Responsibilities: Oversee the operation and maintenance of cloud-based smart building platforms, ensuring their reliability and accuracy. Collaborate with IT and building automation teams to integrate smart building platforms with existing systems. Stay updated on emerging smart building technologies and recommend enhancements to improve performance. Utilize energy analytics tools to collect, analyse, and interpret data related to building performance and energy consumption. Identify trends, patterns, and opportunities for energy efficiency improvements and cost savings. Develop strategies, initiatives, and action plans to optimize building performance and reduce energy consumption. Establish key performance indicators (KPIs) to measure and monitor building performance metrics. Generate reports and presentations summarizing performance data, trends, and actionable recommendations. Present findings to stakeholders, including senior management, and provide guidance for decision-making processes. Collaborate with building operators, facility managers, and vendors to implement energy efficiency projects and initiatives. Foster strong relationships with internal and external stakeholders to drive alignment and support for energy conservation goals. Provide guidance and training to building operators and staff on utilizing smart building platforms effectively. Use Engineering expertise to provide technical oversight, project integration, and project management of initiatives that are executed. Maintain a thorough understanding of corporate energy strategy and legal, statutory, and technical issues that affect the client's premises. Keep abreast of Energy Market developments and changes, ensuring that the client complies with all Energy-Related Legislation. Develop and implement with the client, the overall strategy for energy requirements, to meet the strategic intent of the organisation and represent the Energy Department in all areas of the business. Promote policy and achievements to emphasize how they contribute to its success. Develop and implement strategic briefs for design guides /standards to meet the client objectives and brief client departments accordingly. Provide monitoring and verification through the full cycle of the project to achieve cost and energy-efficient solutions. Validate and challenge where necessary the consumption figures in relation to Utility Billing. Implement and maintain processes and procedures to achieve economic cost in use Maintain a current level of utility market intelligence. Plan, monitor, and achieve consumption/emission targets Qualifications and Experience: Minimum 5 years' experience in energy management Chartered Engineer or equivalent status in Building Services Engineering, mechanical, electrical, and related subjects An appropriate energy-related qualification or equivalent in building services engineering. (to Degree level or higher) NABERS, LEED, etc. certification is a plus. Extensive knowledge of the principal techniques and technologies which support the efficient use of energy. Competency in current benchmark techniques and statistical analysis Working knowledge of M&T software Project management experience Understand the principles behind HVAC, refrigeration, and Lighting operation and system design/integration. Extensive working knowledge of smart platforms, BMS, or similar software and control theory Capable of preparing fully costed energy efficiency proposals and reports Ability to carry out full energy surveys and feasibility studies of energy technologies. Knowledge of customer operations, business drivers, financials and specialist sources of information, and legislative requirements where necessary. About CBRE Global Workplace Solutions: As one of CBRE's core global businesses, Global Workplace Solutions (GWS) provides end-to-end services to occupier clients across the entire lifecycle of a building. Our teams help companies improve their operations and reduce costs, through expert facilities management, project management, real estate and energy and sustainability services. Our dedicated teams work across all industries, and support clients ranging from global Fortune 500 companies to single, iconic buildings. Application Process: Your application will be reviewed by our Talent Resourcing Team and you will be contacted if you have been successful in being short listed for the role. Taking into consideration the costs of sponsorship, the nature of the role and the financial resources of the account in question, we are unable to offer sponsorship for this role. No agencies please. Please note: the job title shown above may be different to local job titles used in our business and issued on any contract of employment.
Mobile Multi disciplined Engineer A/C bias 42- 44,000 My client is a leading provider of M&E building services engineering and facilities management, providing a high specification client base with tailored and bespoke technical engineering solutions. A Mobile Multi Disciplined Engineer is required to carry out PPM, servicing, fault finding and reactive/breakdown repairs to air conditioning systems & equipment to include VRV, VRF, Splits, Cooling systems and AHU & FCU and general electrical work within a number of commercial/corporate buildings & industrial facilities located throughout the Home Counties. In addition to the air conditioning aspect of the position the successful candidate will also carry out monthly PPM/general building services tasks to include fabric maintenance, plumbing & emergency light tests. Candidate Requirements City & Guilds and/or NVQ in Air Conditioning/Refrigeration City & Guilds F-Gas (CAT 1) Recognised Air Conditioning/Refrigeration/HVAC apprenticeship 18th edition Driving License Additional Information Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 77 a week Monday to Friday 08.00am to 16.30pm with a 30-minute lunch break. Overtime - Saturday after 12.00 & Sunday & Bank/Public Holidays is double time. 23 days holiday + stat days + birthday Pension - contribution 3%
Apr 09, 2024
Full time
Mobile Multi disciplined Engineer A/C bias 42- 44,000 My client is a leading provider of M&E building services engineering and facilities management, providing a high specification client base with tailored and bespoke technical engineering solutions. A Mobile Multi Disciplined Engineer is required to carry out PPM, servicing, fault finding and reactive/breakdown repairs to air conditioning systems & equipment to include VRV, VRF, Splits, Cooling systems and AHU & FCU and general electrical work within a number of commercial/corporate buildings & industrial facilities located throughout the Home Counties. In addition to the air conditioning aspect of the position the successful candidate will also carry out monthly PPM/general building services tasks to include fabric maintenance, plumbing & emergency light tests. Candidate Requirements City & Guilds and/or NVQ in Air Conditioning/Refrigeration City & Guilds F-Gas (CAT 1) Recognised Air Conditioning/Refrigeration/HVAC apprenticeship 18th edition Driving License Additional Information Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 77 a week Monday to Friday 08.00am to 16.30pm with a 30-minute lunch break. Overtime - Saturday after 12.00 & Sunday & Bank/Public Holidays is double time. 23 days holiday + stat days + birthday Pension - contribution 3%
Mobile Building Maintenance Engineer 35-36,000 My client is one of UK's leading providers of M&E, HVAC Building Services & Facilities Management, specialists in the provision of tailored and bespoke engineering services to a varied, blue-chip client base to include Industrial, Commercial, Corporate & Government environments respectively. A Mobile Building Maintenance Engineer is required to carry out PPM, reactive/servicing, fault finding/repairs to building services/fabric to include (not limited to) Joinery Emergency light tests Lamping & ballasts Plumbing - repairs to leaks/taps Water temperature checks L8 Basic HVAC - AHU & FCU Client environments will include corporate buildings, office accommodation, managing agents & retail settings located throughout the Home Counties. Essential Candidate Requirements Relevant technical qualifications/further training relevant to the position i.e. City & Guilds/NVQ Experienced in carrying out building services/building fabric maintenance duties as outlined above within commercial & corporate buildings. Driving License Additional Information Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 77 a week Monday to Friday 08.00am to 16.30pm with a 30-minute lunch break. Overtime - Saturday after 12.00 & Sunday & Bank/Public Holidays is double time. 23 days holiday + stat days + birthday Pension - contribution 3%
Apr 09, 2024
Full time
Mobile Building Maintenance Engineer 35-36,000 My client is one of UK's leading providers of M&E, HVAC Building Services & Facilities Management, specialists in the provision of tailored and bespoke engineering services to a varied, blue-chip client base to include Industrial, Commercial, Corporate & Government environments respectively. A Mobile Building Maintenance Engineer is required to carry out PPM, reactive/servicing, fault finding/repairs to building services/fabric to include (not limited to) Joinery Emergency light tests Lamping & ballasts Plumbing - repairs to leaks/taps Water temperature checks L8 Basic HVAC - AHU & FCU Client environments will include corporate buildings, office accommodation, managing agents & retail settings located throughout the Home Counties. Essential Candidate Requirements Relevant technical qualifications/further training relevant to the position i.e. City & Guilds/NVQ Experienced in carrying out building services/building fabric maintenance duties as outlined above within commercial & corporate buildings. Driving License Additional Information Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 77 a week Monday to Friday 08.00am to 16.30pm with a 30-minute lunch break. Overtime - Saturday after 12.00 & Sunday & Bank/Public Holidays is double time. 23 days holiday + stat days + birthday Pension - contribution 3%
Mobile Commercial Gas Engineer My client is a provider of M&E building services engineering and facilities management, providing a high specification client base with tailored and bespoke technical solutions incorporating both maintenance & projects. A Mobile Commercial Gas Engineer is required to carry out PPM, servicing, fault finding and breakdown repairs to commercial gas heating systems i.e. boilers, gas fired heating, LPHW & radiant/plaque as well as a 'first-look' at HVAC systems i.e. AHU/FCU within a variety of client environments to include (not limited to) commercial offices, corporate buildings & retail environments located throughout the North West region i.e M62 Corridor, Manchester/Greater Manchester & Lancashire. Essential Candidate Requirements & Additional Information Commercial ACS Gas: COCN1, CODNCO1, ICPN1, CIGA1, CDGA1, CORT1 TPCP1a Possess strong servicing, fault finding and repair skills Possess a sound knowledge and understanding of commercial gas & heating systems A basic knowledge and appreciation of HVAC & general building services maintenance Experienced in performing PPM to commercial gas heating systems within commercial, corporate, education and leisure & retail environments Driving License (Maximum 6 Penalty Points) Additional Information Salary 40-42k depending on experience Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 100 a week Monday to Thursday 08.00am to 16.30pm Friday 08:00am - 15:30 with a 30-minute lunch break. Overtime - Saturday after 12.00 and Sunday & Bank/Public Holidays is double time. 25 days holiday + birthday + stat days Pension - contribution 3%
Apr 09, 2024
Full time
Mobile Commercial Gas Engineer My client is a provider of M&E building services engineering and facilities management, providing a high specification client base with tailored and bespoke technical solutions incorporating both maintenance & projects. A Mobile Commercial Gas Engineer is required to carry out PPM, servicing, fault finding and breakdown repairs to commercial gas heating systems i.e. boilers, gas fired heating, LPHW & radiant/plaque as well as a 'first-look' at HVAC systems i.e. AHU/FCU within a variety of client environments to include (not limited to) commercial offices, corporate buildings & retail environments located throughout the North West region i.e M62 Corridor, Manchester/Greater Manchester & Lancashire. Essential Candidate Requirements & Additional Information Commercial ACS Gas: COCN1, CODNCO1, ICPN1, CIGA1, CDGA1, CORT1 TPCP1a Possess strong servicing, fault finding and repair skills Possess a sound knowledge and understanding of commercial gas & heating systems A basic knowledge and appreciation of HVAC & general building services maintenance Experienced in performing PPM to commercial gas heating systems within commercial, corporate, education and leisure & retail environments Driving License (Maximum 6 Penalty Points) Additional Information Salary 40-42k depending on experience Company Van i.e. Ford Connect (Reasonable personal use permitted) Call-out rota 1 - 5 Call-out runs from Friday - Friday Call-out paid at 100 a week Monday to Thursday 08.00am to 16.30pm Friday 08:00am - 15:30 with a 30-minute lunch break. Overtime - Saturday after 12.00 and Sunday & Bank/Public Holidays is double time. 25 days holiday + birthday + stat days Pension - contribution 3%
Position: Static Engineer Location: Ealing Schedule: Monday to Friday, 8am to 5pm Type: Full-time Company: Our customer is a growing Hard FM business, with contracts across the South East Responsibilities: Carrying out planned and reactive maintenance on electrical, mechanical, and HVAC plant and equipment Managing a single manned site with support from mobile engineering team Ensuring efficient operation of all building systems Conducting regular inspections and tests to identify any issues or potential hazards Responding promptly to maintenance requests and emergency calls Collaborating with other team members and contractors as needed Requirements: Electrical qualification (e.g., NVQ Level 3 or equivalent) Minimum of 5 years of experience in commercial building maintenance Proficiency in maintenance of electrical, mechanical, and HVAC systems Strong troubleshooting skills and ability to diagnose and repair faults effectively Excellent organizational and time management skills Good communication and interpersonal skills Ability to work independently and as part of a team For more details about this opportunity, please contact Liam Hargate at Coyles
Apr 08, 2024
Full time
Position: Static Engineer Location: Ealing Schedule: Monday to Friday, 8am to 5pm Type: Full-time Company: Our customer is a growing Hard FM business, with contracts across the South East Responsibilities: Carrying out planned and reactive maintenance on electrical, mechanical, and HVAC plant and equipment Managing a single manned site with support from mobile engineering team Ensuring efficient operation of all building systems Conducting regular inspections and tests to identify any issues or potential hazards Responding promptly to maintenance requests and emergency calls Collaborating with other team members and contractors as needed Requirements: Electrical qualification (e.g., NVQ Level 3 or equivalent) Minimum of 5 years of experience in commercial building maintenance Proficiency in maintenance of electrical, mechanical, and HVAC systems Strong troubleshooting skills and ability to diagnose and repair faults effectively Excellent organizational and time management skills Good communication and interpersonal skills Ability to work independently and as part of a team For more details about this opportunity, please contact Liam Hargate at Coyles
Static Engineer needed in Battersea Static Engineer needed in Battersea, working Monday to Friday 8am to 5pm in a busy mixed use building, incorporating retail, residential and office space Responsibilities: Performing planned and reactive maintenance on electrical, mechanical, and HVAC plant equipment, focusing on landlord services Managing maintenance tasks within a busy mixed-use building environment Operating as the primary engineer on-site with support from a mobile engineering team Ensuring the efficient operation of building systems to meet the needs of retail, residential, and office occupants Conducting regular inspections and tests to maintain compliance with safety regulations Collaborating with property management and tenants to address maintenance issues promptly Requirements: Electrical qualification (e.g. C&G Level 2 / NVQ Level 3 or equivalent) Minimum of 5 years of experience in commercial building maintenance Expertise in maintenance of electrical, mechanical, and HVAC systems, particularly in a mixed-use building setting Strong problem-solving skills and ability to handle both planned and reactive maintenance tasks effectively Excellent communication and interpersonal skills Ability to work independently and coordinate with a mobile engineering support team How to Apply: For further details or to apply for this position, please contact Liam Hargate at Coyles by calling (phone number removed).
Apr 08, 2024
Full time
Static Engineer needed in Battersea Static Engineer needed in Battersea, working Monday to Friday 8am to 5pm in a busy mixed use building, incorporating retail, residential and office space Responsibilities: Performing planned and reactive maintenance on electrical, mechanical, and HVAC plant equipment, focusing on landlord services Managing maintenance tasks within a busy mixed-use building environment Operating as the primary engineer on-site with support from a mobile engineering team Ensuring the efficient operation of building systems to meet the needs of retail, residential, and office occupants Conducting regular inspections and tests to maintain compliance with safety regulations Collaborating with property management and tenants to address maintenance issues promptly Requirements: Electrical qualification (e.g. C&G Level 2 / NVQ Level 3 or equivalent) Minimum of 5 years of experience in commercial building maintenance Expertise in maintenance of electrical, mechanical, and HVAC systems, particularly in a mixed-use building setting Strong problem-solving skills and ability to handle both planned and reactive maintenance tasks effectively Excellent communication and interpersonal skills Ability to work independently and coordinate with a mobile engineering support team How to Apply: For further details or to apply for this position, please contact Liam Hargate at Coyles by calling (phone number removed).
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Technical Energy Manager to join the team located in London and will be responsible for supporting clients to deliver and validate energy, carbon and cost reductions. Identify and implement energy efficiency measures, low and zero carbon solutions and operational best practices. The purpose of this role is: To ensure the effective management of energy resources to meet client's objectives and targets. To identify, develop and implement new energy related opportunities Carry out all energy related tasks to ensure service provision and compliance To motivate and train people in energy management This role is to cover a portfolio of clients in various industries to help achieve their ESG targets. The role has a heavy reliance on building relationships with senior fm clients in order to understand their requirements and present proposals for approval and funding. Due to this the role has a heavy weighting to sales although the individual must be able to convert these sales into operation deliverables and report back to the client. There is an opportunity to build a team should demand grow. Primary Objectives and Tasks: Maintain a thorough understanding of corporate energy strategy, legal, statutory and technical issues which affect the client's premises Assist clients to measure, monitor and report on energy consumption and carbon emissions Develop and advise on energy strategy/solutions, developing these into working projects, which meet client objectives and best practice Identify opportunities to reduce carbon emissions within clients' property portfolios Calculate potential savings in terms of kWh, CO2 and cost Deliver on these opportunities through managing installations & behavioral changes To be able to normalise and verify savings post implementation Assist clients to meet their increasingly challenging compliance requirements Support wider energy management objectives, for example through energy procurement Provide full feasibility studies of costed initiatives / projects to reduce energy usage. Project management and implementation of initiatives. Work with and support the Head of Projects, ensuring that projects are as energy efficient as is financially possible. Provide monitoring and verification through the full cycle of the project to achieve cost and energy efficient solutions. Ensure clients benefit from emerging opportunities, innovation and technology Support clients' wider sustainability and corporate social responsibility objectives Keep abreast of Energy Market developments and changes, ensuring that the client comply with all Energy related Legislation Train Energy Engineers and manage their activity, ensuring their expedient us Core Competencies: Extensive working knowledge of BMS and control theory. Extensive knowledge of the principle techniques and technologies which support the efficient use of energy. Competency in current benchmark techniques and statistical analysis Understand the principles behind HVAC, refrigeration and Lighting operation and system design / integration Capable of preparing fully costed energy efficiency proposals and reports Ability to carry out full energy surveys and feasibility studies of energy technologies Qualifications Degree ideally in energy and sustainability, engineering or building services Specific energy efficiency / low carbon qualifications are desirable Relevant professional membership e.g. CIBSE, Energy Institute Skills & Experience Project management skills, with ability to manage multiple complex work-streams and clients, ability to manage budgets Delivers work efficiently and to time Experience in energy efficiency and wider sustainable energy is required Experience of energy management, including energy procurement and compliance would be beneficial Extensive knowledge of the principle techniques and technologies which support the efficient use of energy Ability to interpret energy data and use as a basis for reduction strategies Knowledge of Low and zero carbon technologies Exceptional report writing skills with ability to communicate technical issues effectively
Apr 08, 2024
Full time
CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Technical Energy Manager to join the team located in London and will be responsible for supporting clients to deliver and validate energy, carbon and cost reductions. Identify and implement energy efficiency measures, low and zero carbon solutions and operational best practices. The purpose of this role is: To ensure the effective management of energy resources to meet client's objectives and targets. To identify, develop and implement new energy related opportunities Carry out all energy related tasks to ensure service provision and compliance To motivate and train people in energy management This role is to cover a portfolio of clients in various industries to help achieve their ESG targets. The role has a heavy reliance on building relationships with senior fm clients in order to understand their requirements and present proposals for approval and funding. Due to this the role has a heavy weighting to sales although the individual must be able to convert these sales into operation deliverables and report back to the client. There is an opportunity to build a team should demand grow. Primary Objectives and Tasks: Maintain a thorough understanding of corporate energy strategy, legal, statutory and technical issues which affect the client's premises Assist clients to measure, monitor and report on energy consumption and carbon emissions Develop and advise on energy strategy/solutions, developing these into working projects, which meet client objectives and best practice Identify opportunities to reduce carbon emissions within clients' property portfolios Calculate potential savings in terms of kWh, CO2 and cost Deliver on these opportunities through managing installations & behavioral changes To be able to normalise and verify savings post implementation Assist clients to meet their increasingly challenging compliance requirements Support wider energy management objectives, for example through energy procurement Provide full feasibility studies of costed initiatives / projects to reduce energy usage. Project management and implementation of initiatives. Work with and support the Head of Projects, ensuring that projects are as energy efficient as is financially possible. Provide monitoring and verification through the full cycle of the project to achieve cost and energy efficient solutions. Ensure clients benefit from emerging opportunities, innovation and technology Support clients' wider sustainability and corporate social responsibility objectives Keep abreast of Energy Market developments and changes, ensuring that the client comply with all Energy related Legislation Train Energy Engineers and manage their activity, ensuring their expedient us Core Competencies: Extensive working knowledge of BMS and control theory. Extensive knowledge of the principle techniques and technologies which support the efficient use of energy. Competency in current benchmark techniques and statistical analysis Understand the principles behind HVAC, refrigeration and Lighting operation and system design / integration Capable of preparing fully costed energy efficiency proposals and reports Ability to carry out full energy surveys and feasibility studies of energy technologies Qualifications Degree ideally in energy and sustainability, engineering or building services Specific energy efficiency / low carbon qualifications are desirable Relevant professional membership e.g. CIBSE, Energy Institute Skills & Experience Project management skills, with ability to manage multiple complex work-streams and clients, ability to manage budgets Delivers work efficiently and to time Experience in energy efficiency and wider sustainable energy is required Experience of energy management, including energy procurement and compliance would be beneficial Extensive knowledge of the principle techniques and technologies which support the efficient use of energy Ability to interpret energy data and use as a basis for reduction strategies Knowledge of Low and zero carbon technologies Exceptional report writing skills with ability to communicate technical issues effectively